bus/Makefile.am

   1 configdir=$(sysconfdir)/dbus-1
   2 dbus_daemon_execdir = $(DBUS_DAEMONDIR)
   3
   4 INCLUDES = -I$(top_srcdir) \
   5         $(DBUS_BUS_CFLAGS) \
   6         -DDBUS_SYSTEM_CONFIG_FILE=\""$(configdir)/system.conf"\" \
   7         -DDBUS_COMPILATION
   8
   9 EFENCE=
  10
  11 CONFIG_IN_FILES=                                \
  12         session.conf.in                         \
  13         system.conf.in                          \
  14         org.freedesktop.dbus-session.plist.in
  15
  16 config_DATA=                                    \
  17         session.conf                            \
  18         system.conf
  19
  20 if DBUS_ENABLE_LAUNCHD
  21 agentdir=$(LAUNCHD_AGENT_DIR)
  22 agent_DATA=org.freedesktop.dbus-session.plist
  23 endif
  24
  25 if DBUS_USE_LIBXML
  26 XML_SOURCES=config-loader-libxml.c
  27 endif
  28 if DBUS_USE_EXPAT
  29 XML_SOURCES=config-loader-expat.c
  30 endif
  31
  32 if DBUS_BUS_ENABLE_KQUEUE
  33 DIR_WATCH_SOURCE=dir-watch-kqueue.c
  34 else
  35 if DBUS_BUS_ENABLE_INOTIFY
  36 DIR_WATCH_SOURCE=dir-watch-inotify.c
  37 else
  38 if DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX
  39 DIR_WATCH_SOURCE=dir-watch-dnotify.c
  40 else
  41 DIR_WATCH_SOURCE=dir-watch-default.c
  42 endif
  43 endif
  44 endif
  45
  46 BUS_SOURCES=                                    \
  47         activation.c                            \
  48         activation.h                            \
  49         activation-exit-codes.h                 \
  50         bus.c                                   \
  51         bus.h                                   \
  52         config-parser.c                         \
  53         config-parser.h                         \
  54         config-parser-common.c                  \
  55         config-parser-common.h                  \
  56         connection.c                            \
  57         connection.h                            \
  58         desktop-file.c                          \
  59         desktop-file.h                          \
  60         $(DIR_WATCH_SOURCE)                     \
  61         dir-watch.h                             \
  62         dispatch.c                              \
  63         dispatch.h                              \
  64         driver.c                                \
  65         driver.h                                \
  66         expirelist.c                            \
  67         expirelist.h                            \
  68         policy.c                                \
  69         policy.h                                \
  70         selinux.h                               \
  71         selinux.c                               \
  72         services.c                              \
  73         services.h                              \
  74         signals.c                               \
  75         signals.h                               \
  76         test.c                                  \
  77         test.h                                  \
  78         utils.c                                 \
  79         utils.h                                 \
  80         $(XML_SOURCES)
  81
  82 dbus_daemon_SOURCES=                            \
  83         $(BUS_SOURCES)                          \
  84         main.c
  85
  86 dbus_daemon_CPPFLAGS = -DDBUS_STATIC_BUILD
  87 dbus_daemon_LDADD=                                      \
  88         $(top_builddir)/dbus/libdbus-internal.la        \
  89         $(EFENCE)                                       \
  90         $(DBUS_BUS_LIBS)
  91
  92 dbus_daemon_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
  93
  94 LAUNCH_HELPER_SOURCES=                          \
  95         $(XML_SOURCES)                          \
  96         config-parser-common.c                  \
  97         config-parser-common.h                  \
  98         config-parser-trivial.c                 \
  99         config-parser-trivial.h                 \
 100         desktop-file.c                          \
 101         desktop-file.h                          \
 102         utils.c                                 \
 103         utils.h                                 \
 104         activation-exit-codes.h                 \
 105         activation-helper.h                     \
 106         activation-helper.c
 107
 108 ## This is the installed launch helper with the setuid checks
 109 dbus_daemon_launch_helper_SOURCES=              \
 110         activation-helper-bin.c                 \
 111         $(LAUNCH_HELPER_SOURCES)
 112
 113 dbus_daemon_launch_helper_CPPFLAGS = -DDBUS_STATIC_BUILD
 114 dbus_daemon_launch_helper_LDADD=                \
 115         $(top_builddir)/dbus/libdbus-internal.la \
 116         $(DBUS_LAUNCHER_LIBS)
 117
 118 dbus_daemon_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 119
 120 ## we build another binary so we can do the launch testing without root privs.
 121 ## DO NOT INSTALL THIS FILE
 122 dbus_daemon_launch_helper_test_SOURCES=         \
 123         activation-helper-bin.c                 \
 124         $(LAUNCH_HELPER_SOURCES)
 125
 126 dbus_daemon_launch_helper_test_LDADD=           \
 127         $(top_builddir)/dbus/libdbus-internal.la \
 128         $(DBUS_LAUNCHER_LIBS)
 129
 130 dbus_daemon_launch_helper_test_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 131 dbus_daemon_launch_helper_test_CPPFLAGS= -DDBUS_STATIC_BUILD    \
 132         -DACTIVATION_LAUNCHER_TEST
 133
 134 ## we build yet another binary so we can do the OOM tests
 135 ## DO NOT INSTALL THIS FILE
 136 bus_test_launch_helper_SOURCES=         \
 137         test-launch-helper.c            \
 138         $(LAUNCH_HELPER_SOURCES)
 139
 140 bus_test_launch_helper_LDADD=           \
 141         $(top_builddir)/dbus/libdbus-internal.la \
 142         $(DBUS_LAUNCHER_LIBS)
 143
 144 bus_test_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 145 bus_test_launch_helper_CPPFLAGS= -DDBUS_STATIC_BUILD    \
 146         -DACTIVATION_LAUNCHER_TEST      \
 147         -DACTIVATION_LAUNCHER_DO_OOM
 148
 149 ## we use noinst_PROGRAMS not check_PROGRAMS so that we build
 150 ## even when not doing "make check"
 151 noinst_PROGRAMS = $(TESTS)
 152 dbus_daemon_exec_PROGRAMS = dbus-daemon
 153 libexec_PROGRAMS = dbus-daemon-launch-helper
 154
 155 ## note that TESTS has special meaning (stuff to use in make check)
 156 ## so if adding tests not to be run in make check, don't add them to
 157 ## TESTS
 158 TESTS =
 159
 160 if DBUS_BUILD_TESTS
 161 TESTS_ENVIRONMENT=DBUS_TEST_DATA=$(top_builddir)/test/data DBUS_TEST_HOMEDIR=$(top_builddir)/dbus DBUS_FATAL_WARNINGS=1 DBUS_BLOCK_ON_ABORT=1
 162 TESTS += bus-test bus-test-system
 163
 164 if DBUS_UNIX
 165 TESTS += bus-test-launch-helper
 166 # this is used by the tests but is not,itself, a test
 167 noinst_PROGRAMS += dbus-daemon-launch-helper-test
 168 endif DBUS_UNIX
 169
 170 endif DBUS_BUILD_TESTS
 171
 172 bus_test_system_SOURCES=                        \
 173         $(XML_SOURCES)                          \
 174         config-parser-common.c                  \
 175         config-parser-common.h                  \
 176         config-parser-trivial.c                 \
 177         config-parser-trivial.h                 \
 178         utils.c                                 \
 179         utils.h                                 \
 180         test-system.c
 181
 182 bus_test_system_CPPFLAGS = -DDBUS_STATIC_BUILD
 183 bus_test_system_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS)
 184 bus_test_system_LDFLAGS=@R_DYNAMIC_LDFLAG@
 185
 186 bus_test_SOURCES=                               \
 187         $(BUS_SOURCES)                          \
 188         test-main.c
 189
 190 bus_test_CPPFLAGS = -DDBUS_STATIC_BUILD
 191 bus_test_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS)
 192 bus_test_LDFLAGS=@R_DYNAMIC_LDFLAG@
 193
 194 ## mop up the gcov files
 195 clean-local:
 196         /bin/rm *.bb *.bbg *.da *.gcov || true
 197
 198 install-data-hook:
 199         $(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus
 200         $(mkinstalldirs) $(DESTDIR)$(configdir)/system.d
 201         $(mkinstalldirs) $(DESTDIR)$(configdir)/session.d
 202         $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/services
 203         $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/system-services
 204 if HAVE_SYSTEMD
 205 # Install dbus.socket as default implementation of a D-Bus stack
 206         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants
 207         $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants/dbus.socket
 208 # Unconditionally enable D-Bus on systemd installations
 209         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants
 210         $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket
 211         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants
 212         $(LN_S) ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service
 213 endif
 214
 215 if DBUS_UNIX
 216 install-exec-hook:
 217         if test `id -u` -eq 0; then \
 218                 chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
 219                 chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
 220         else \
 221                 echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
 222                 echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
 223         fi
 224 endif
 225
 226 #### Init scripts fun
 227 SCRIPT_IN_FILES=messagebus.in \
 228                 messagebus-config.in \
 229                 rc.messagebus.in
 230
 231 ## Red Hat start
 232 if DBUS_INIT_SCRIPTS_RED_HAT
 233
 234 initddir=$(sysconfdir)/rc.d/init.d
 235
 236 initd_SCRIPTS=  \
 237         messagebus
 238
 239 endif
 240  ## Red Hat end
 241
 242 ## Slackware start
 243 if DBUS_INIT_SCRIPTS_SLACKWARE
 244
 245 initddir=$(sysconfdir)/rc.d/
 246
 247 initd_SCRIPTS=  \
 248         rc.messagebus
 249
 250 endif
 251 ## Slackware end
 252
 253 ## Cygwin start
 254 if DBUS_INIT_SCRIPTS_CYGWIN
 255
 256 bin_SCRIPTS=    \
 257         messagebus-config
 258
 259 endif
 260 ## Cygwin end
 261
 262 if HAVE_SYSTEMD
 263 SCRIPT_IN_FILES += \
 264         dbus.service.in \
 265         dbus.socket.in
 266
 267 systemdsystemunit_DATA = \
 268         dbus.service \
 269         dbus.socket
 270 endif
 271
 272 #### Extra dist
 273
 274 EXTRA_DIST=$(CONFIG_IN_FILES) $(SCRIPT_IN_FILES)