build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2015 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20
  21 AC_CONFIG_MACRO_DIR([m4])
  22
  23 AC_PROG_CXX
  24 AC_PROG_LIBTOOL
  25 AC_PROG_MKDIR_P
  26
  27 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  28
  29 LT_INIT
  30
  31 DALI_ADAPTOR_VERSION=dali_version
  32 AC_SUBST(DALI_ADAPTOR_VERSION)
  33
  34 FREETYPE_REQUIRED=9.16.3
  35 # 17.1.11 = Freetype version 2.5.2
  36 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  37
  38 PKG_CHECK_MODULES(DALICORE, dali-core)
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  48 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  49 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  50                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  51                   )
  52
  53
  54 # Currently, dali-adaptor always requires EFL on all platforms.
  55 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  56 enable_efl=yes
  57 if test "x$enable_efl" = "xyes"; then
  58 PKG_CHECK_MODULES(ECORE, ecore)
  59 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  60 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  61 PKG_CHECK_MODULES(ELEMENTARY, elementary)
  62 # Check for EldBus.h in ECore
  63 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  64 fi
  65
  66
  67 DALI_ELDBUS_AVAILABLE=
  68 if test "x$eldbus_available" = "xyes"; then
  69   DALI_ELDBUS_AVAILABLE=true
  70   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  71 fi
  72 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  73
  74
  75 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  76
  77 if test "x$tpkp_curl_available" = "xyes"; then
  78   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  79 fi
  80
  81 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  82
  83 AC_ARG_ENABLE(exportall,
  84               [AC_HELP_STRING([--enable-exportall],
  85                               [enables the exporting of all the symbols in the library])],
  86               [enable_exportall=yes],
  87               [enable_exportall=no])
  88
  89 AC_ARG_ENABLE([debug],
  90               [AC_HELP_STRING([--enable-debug],
  91                               [Turns on debugging])],
  92               [enable_debug=$enableval],
  93               [enable_debug=no])
  94
  95 AC_ARG_ENABLE(shaderbincache,
  96               [AC_HELP_STRING([--enable-shaderbincache],
  97                               [enables shader binary cache])],
  98               [enable_shaderbincache=$enableval],
  99               [enable_shaderbincache=DISABLE])
 100
 101 AC_ARG_ENABLE(networklogging,
 102               [AC_HELP_STRING([--enable-networklogging],
 103                               [enables network for debug tool])],
 104               [enable_networklogging=$enableval],
 105               [enable_networklogging=no])
 106
 107
 108 if test "x$enable_debug" = "xyes"; then
 109   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 110 fi
 111
 112 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 113   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 114 fi
 115
 116 if test "x$enable_shaderbincache" = "xENABLE"; then
 117   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 118 fi
 119
 120 if test "x$enable_networklogging" = "xyes"; then
 121   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 122 fi
 123
 124 # If Ecore IMF version is greater than 1.13, then some structures are different
 125 if test "x$ecore_imf_1_13" = "xyes"; then
 126   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 127 fi
 128
 129 AC_ARG_ENABLE([gles],
 130               [AC_HELP_STRING([--enable-gles],
 131                               [Specify the OpenGL ES version for backwards compatibility])],
 132               [enable_gles=$enableval],
 133               [enable_gles=30])
 134
 135 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 136
 137 # Currently, dali-adaptor always does not require libuv because it runs on ecore on all platforms.
 138 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
 139 with_libuv=no
 140
 141 # Node.JS already has a libuv main loop running,so we have to integrate with it
 142 AM_CONDITIONAL(LIB_UV_EVENT_LOOP, test x$with_libuv != xno)
 143
 144
 145 build_for_libuv=no
 146 if test "x$with_libuv" != "xno"; then
 147   AC_MSG_NOTICE("build with libuv mainloop (Node.JS support) == yes");
 148   [build_for_libuv=yes]
 149   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNODE_JS_SUPPORT  -I${with_libuv}"
 150 else
 151  #not using libuv build
 152   AC_MSG_NOTICE("build with libuv mainloop == no (Node.JS not supported)");
 153 fi
 154
 155 # Currently, dali-adaptor requires appfw on Tizen
 156 # and does not require it on Ubuntu.
 157 # So we should be able to enable/disable this option for dali-adaptor.
 158 AC_ARG_ENABLE([appfw],
 159               [AC_HELP_STRING([--enable-appfw],
 160                               [Builds with Tizen App framework libraries, off by default])],
 161               [enable_appfw=$enableval],
 162               [enable_appfw=no])
 163
 164 # Option to allow building with Tizen SDK 2.2
 165 AC_ARG_WITH([tizen-2-2-compatibility],
 166             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 167                             [Use Tizen SDK 2.2 compatibility])],
 168             [with_tizen_2_2_compatibility=$withval],
 169             [with_tizen_2_2_compatibility=no])
 170
 171 # Tizen Profile options
 172 AC_ARG_ENABLE([profile],
 173               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,UBUNTU],
 174                             [Select the variant of tizen])],
 175               [enable_profile=$enableval],
 176               [enable_profile=COMMON])
 177
 178 # Ensure valid profile selected
 179 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xUBUNTU"; then
 180   AC_MSG_ERROR([$enable_profile is an invalid profile])
 181 fi
 182
 183 AC_ARG_ENABLE(wayland,
 184               [  --enable-wayland       Build on Wayland],
 185               enable_wayland=yes,
 186               enable_wayland=no)
 187
 188 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 189 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 190 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 191 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 192 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 193 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 194 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 195 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 196 AM_CONDITIONAL([USE_EFL], [test x$enable_efl = xyes])
 197 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 198
 199 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 200
 201 # Platforms should either enable features or remove them, they
 202 # should not disable features. This allows the developer to override
 203 # features through the command line.
 204
 205 if test "x$enable_profile" = "xCOMMON"; then
 206 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 207 fi
 208
 209 if test "x$enable_profile" = "xMOBILE"; then
 210 PKG_CHECK_MODULES(OPENGLES20, gles20)
 211 enable_assimp=no
 212 fi
 213
 214 if test "x$enable_profile" = "xLITE"; then
 215 PKG_CHECK_MODULES(OPENGLES20, gles20)
 216 fi
 217
 218 if test "x$enable_profile" = "xWEARABLE"; then
 219 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 220 fi
 221
 222 if test "x$enable_profile" = "xTV"; then
 223 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 224 fi
 225
 226 if test "x$enable_profile" = "xUBUNTU"; then
 227 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 228 else
 229
 230
 231
 232 PKG_CHECK_MODULES(DLOG, dlog)
 233 PKG_CHECK_MODULES(SENSOR, sensor)
 234 PKG_CHECK_MODULES(TTS, tts)
 235 PKG_CHECK_MODULES(VCONF, vconf)
 236
 237 if test "x$enable_efl" = "xyes"; then
 238 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 239 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 240 fi
 241 fi
 242
 243 fi # ubuntu profile test
 244
 245 if test "x$enable_appfw" = "xyes"; then
 246 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 247 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 248 fi
 249
 250 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 251 if test "x$enable_efl" = "xyes"; then
 252 if test "x$enable_wayland" = "xyes"; then
 253 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon],
 254                   [DALI_USE_ECORE_WAYLAND=1],
 255                   [DALI_USE_ECORE_WAYLAND=0])
 256
 257 else
 258 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 259                   [DALI_USE_ECORE_X11=1],
 260                   [DALI_USE_ECORE_X11=0])
 261 PKG_CHECK_MODULES(X11, [x11],
 262                   [DALI_USE_X11=1],
 263                   [DALI_USE_X11=0])
 264 fi
 265 fi
 266 # Using Wayland API directly  ( main loop agnostic, typically for running on libuv)
 267 #  wayland-extension-client include xdg-shell-client
 268 if test "x$enable_efl" = "xno"; then
 269 if test "x$enable_wayland" = "xyes"; then
 270 PKG_CHECK_MODULES(WAYLAND, [ egl wayland-egl wayland-client >= 1.2.0 xkbcommon],
 271                   [DALI_USE_WAYLAND=1],
 272                   [DALI_USE_WAYLAND=0])
 273 fi
 274 fi
 275
 276 # remove this when we update common repos
 277 # common profile currently does not have wayland extensions like xdg-shell
 278 if test "x$enable_wayland" = "xyes"; then
 279 if test "x$enable_profile" != "xCOMMON"; then
 280 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client)
 281 fi
 282 fi
 283 AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1])
 284
 285 if test x$DALI_DATA_RW_DIR != x; then
 286   dataReadWriteDir=$DALI_DATA_RW_DIR
 287 else
 288   dataReadWriteDir=${prefix}/share/dali/
 289 fi
 290
 291 if test x$DALI_DATA_RO_DIR != x; then
 292   dataReadOnlyDir=$DALI_DATA_RO_DIR
 293 else
 294   dataReadOnlyDir=${prefix}/share/dali/
 295 fi
 296
 297 if test x$FONT_CONFIGURATION_FILE != x; then
 298   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 299 fi
 300
 301 AC_SUBST(dataReadWriteDir)
 302 AC_SUBST(dataReadOnlyDir)
 303 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 304 AC_SUBST(DALI_PROFILE_CFLAGS)
 305 AC_SUBST(fontConfigurationFile)
 306
 307 # Specify the include directory for development headers
 308 #devincludepath=${includedir}/dali/internal
 309 devincludepath=${includedir}
 310 AC_SUBST(devincludepath)
 311
 312 AC_CONFIG_FILES([
 313  Makefile
 314  dali-adaptor.pc
 315  dali-adaptor-integration.pc
 316 ])
 317
 318 if test "x$freetype_bitmap_support" = "xyes"; then
 319 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 320 fi
 321
 322 AC_OUTPUT
 323
 324
 325 echo "
 326 Configuration
 327 -------------
 328   Prefix:                           $prefix
 329   Debug Build:                      $enable_debug
 330   Compile flags                     $DALI_ADAPTOR_CFLAGS
 331   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 332   Profile:                          $enable_profile
 333   Data Dir (Read/Write):            $dataReadWriteDir
 334   Data Dir (Read Only):             $dataReadOnlyDir
 335   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 336   EldBus:                           $eldbus_available
 337   Shader Binary Cache:              $enable_shaderbincache
 338   Using LibUV mainloop (Node.JS)    $build_for_libuv
 339   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 340   Network logging enabled:          $enable_networklogging
 341   Font config file:                 $fontConfigurationFile
 342   Building with EFL Libraries       $enable_efl
 343   Using Tizen APP FW libraries      $enable_appfw
 344 "
 345 # optional output of node.js source path if we're building with libuv
 346 if test "x$build_for_libuv" != "xno"; then
 347 echo "  LibUV header path         $with_libuv"
 348 fi