3 # Copyright (c) 2018 Samsung Electronics Co., Ltd.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
23 use File::Copy::Recursive qw(dircopy);
28 ################################################################################
30 ################################################################################
31 # Add any required system packages to this list - if they are not present, then
32 # this script will attempt to install them for you.
33 my @system_packages = (
50 "libcurl4-gnutls-dev",
55 # Some packages like require building from source
56 # v8 is currently disabled until we can get it working without a http proxy being setup
59 {"name" => "disabled-v8",
61 "use_depot_tools" => 1,
62 "repo" => "https://chromium.googlesource.com/v8/v8.git",
63 "depot_tools_repo" => "https://chromium.googlesource.com/chromium/tools/depot_tools.git",
65 # original version used with DALi is 3.25.19. 3.32.7 is the latest we can use before
66 # upgrading DALi to use c++0x or c++11
67 "version" => " 3.32.7", "make" => "make -j8 library=shared", "build-mode" =>"debug" },
70 ### Detect any http proxy, part of v8 installation requires this information
74 if( exists $ENV{http_proxy} )
76 # string split into 3 items http, //ip, port
77 my @http_proxy_info = split( /:/,$ENV{http_proxy}, );
79 $http_proxy_ip = @http_proxy_info[1];
80 $http_proxy_ip =~ s/[\/]//g;; # remove forward slashes
81 $http_proxy_port = @http_proxy_info[2];
84 # Make best guess as to where this program was run from (note, it is
85 # always possible to override the location of $0 by the calling
86 # program, so we can't really tell for sure that this is where we
93 $exec_path = abs_path($0);
95 $exec_path = dirname($exec_path);
97 my $root_path = getcwd();
99 # Search for the root dali-env directory
100 if($exec_path =~ m!dali-env/opt/bin!)
102 # We are using the installed dali_env script
104 $root_path = $exec_path;
105 while(basename($root_path) ne "dali-env" && $root_path ne "")
107 $root_path = dirname($root_path);
110 elsif($root_path =~ m!dali-env$! or $root_path =~ m!dali-env/!)
112 # We are NOT using the installed dali_env script
113 # Find dali-env root from current directory
115 while(basename($root_path) ne "dali-env" && $root_path ne "")
117 $root_path = dirname($root_path);
122 # dali-env root dir should be in the current directory
124 $root_path .= "/dali-env";
128 # Creating a new dali-env
134 my $src_path = "$root_path/src-packages";
135 my $sbs_path = "$root_path/target";
136 my $install_path = "$root_path/opt";
143 GetOptions("create" => \$opt_create,
144 "setenv" => \$opt_setenv,
145 "help" => \$opt_help,
146 "man" => \$opt_man) or pod2usage(2);
148 pod2usage(1) if $opt_help;
149 pod2usage(-exitstatus => 0, -verbose => 2) if $opt_man;
152 ################################################################################
156 mkpath("$install_path/bin");
157 mkpath("$install_path/lib/pkgconfig");
158 mkpath("$install_path/include");
159 mkpath("$install_path/share/aclocal");
163 copy($0, "$install_path/bin/dali_env");
164 chmod(0755, "$install_path/bin/dali_env");
167 ################################################################################
171 my $cwd = substr(getcwd(), 0, length($root_path));
172 #print "cwd = $cwd\nroot = $root_path\n";
173 return $cwd eq $root_path;
176 ################################################################################
182 # To use the desktop libraries, please add the following lines to your .bashrc or
183 # create a setenv script from them, e.g. by running this command as follows
184 # \$ $install_path/bin/dali_env -s > setenv
186 # You can then source this script by using
189 # Use DESKTOP_PREFIX when running configure in dali/build/tizen:
190 # \$ CXXFLAGS="-g -O0" ./configure --prefix=\$DESKTOP_PREFIX
192 export DESKTOP_PREFIX=$install_path
193 export PATH=$install_path/bin:\$PATH
194 export LD_LIBRARY_PATH=$install_path/lib:\$LD_LIBRARY_PATH
195 export INCLUDEDIR=$install_path/include
196 export PKG_CONFIG_PATH=$install_path/lib/pkgconfig:/usr/lib/pkgconfig:/usr/share/pkgconfig
197 export DOTNET_CLI_TELEMETRY_OPTOUT=1
198 export DALI_WINDOW_WIDTH=480
199 export DALI_WINDOW_HEIGHT=800
204 ################################################################################
206 sub check_system_package
209 foreach $package (@_)
211 my @x=split(/\s+/, `dpkg -l $package|grep $package`);
214 print "Attempting to install $package\n";
215 system("sudo apt-get -y --force-yes install $package");
220 sub check_system_packages
222 print "Checking for required system packages (may require sudo password)\n";
224 check_system_package(@system_packages);
226 my $gnome_v =`dpkg -l gnome-common| tail -1| sed "s/ \\+/ /g" | cut -d' ' -f 3`;
227 my @am = split(/\./, `automake --version | head -1 | cut -f4 -d' '`);
228 if($gnome_v =~ /$2.24/ && $am[1]>10)
230 die "Gnome common and automake are not compatible - automake is too new\n";
232 my @gpp_v = (`g++ --version | head -1` =~ /(\d+)\.(\d+)\.(\d+)/);
234 if(! (($gpp_v[0] > 4)
236 ($gpp_v[0] == 4 && $gpp_v[1] > 4)
238 ($gpp_v[0] == 4 && $gpp_v[1] == 4 && $gpp_v[2] >= 5)))
240 die "You need g++ 4.5.1 or greater to build dali\n";
244 sub check_source_packages
248 foreach $pkgref (@source_pkgs)
250 my $pkg = $pkgref->{"name"};
253 install_v8( $pkgref );
258 ################################################################################
265 my $link = "/usr/lib/$arch-linux-gnu/libturbojpeg.so";
269 print "Creating libjpegturbo symbolic link\n";
270 system("sudo ln -s $link.0 $link");
274 ################################################################################
275 # Helper to run and print out the command being run and quit if it fails
281 print("Running: $command\n");
282 $ret = system("$command");
283 if($ret >> 8) { die "$command failed \n"; }
286 ################################################################################
287 # later versions of v8 (post mid 2014) require googles depot_tools to build.
289 sub install_google_depot_tools
293 # clone the depo_tools into the source directory and set the path up
297 my $depot_tools_directory = $src_path . "/depot_tools";
298 my $depot_tools_repo = $v8->{"depot_tools_repo"};
300 # clear the directory if exists
301 rmtree( $depot_tools_directory );
303 # clone the depot tools
304 run_command( "git clone " . $depot_tools_repo. " " . $depot_tools_directory );
306 # add it the the path
307 $ENV{PATH} = "$ENV{PATH}:$depot_tools_directory";
309 # need to setup a config file for the proxy
310 create_boto_config_file( $v8 , $depot_tools_directory );
312 # set the config location as an environment variable ( used by scripts depot_tools)
313 $ENV{NO_AUTH_BOTO_CONFIG}="$src_path/depot_tools/.boto";
315 # change to depot tools directory
316 chdir( $depot_tools_directory );
319 run_command("fetch --nohooks v8");
324 ################################################################################
325 # later versions of v8 use boto, which currently requires having proxy manually set
327 sub create_boto_config_file
330 my $depot_tools_directory = $_[1];
331 print(" depot_tools directory = $depot_tools_directory\n");
333 print("Configuring boto with http proxy IP = ". $http_proxy_ip . ", Port = " . $http_proxy_port . "\n");
335 # Create the proxy info for the boto file
336 my $fileContents = <<"END";
341 proxy = $http_proxy_ip
342 proxy_port = $http_proxy_port
344 # Place the config file in the depot tools folder
345 my $filename = $depot_tools_directory . "/" . ".boto";
346 print("Creating Boto config file with proxy settings to file ". $filename . "\n");
348 open( $fh, '>', $filename );
349 print { $fh } $fileContents;
352 # export the environment variable
353 run_command("gclient config https://gclient.googlecode.com/svn/trunk/gclient");
355 run_command("gclient runhooks");
360 ################################################################################
361 # We need a specific version of V8 to work with DALi
362 # - Check a txt file in dali-env to see if v8 needs upgrading (checks gcc version too)
363 # - Clones the source
364 # - builds dependencies (v8 automatically clones it's GYP build system)
366 # - Create a package file
367 # It is cloned, then built from source, we create a package file for it, then
368 # it's copied into dali-env
373 my $v8Version = $v8->{"version"};
374 print( "Checking if V8 ". $v8Version. " is installed \n");
377 # Check currently installed version
378 # We create a text file with v8 and gcc version in the filename to compare with
379 # Version file is stored as "v8_2.3.4_installed_built_with_gcc_4_8_3.txt"
381 # get the gcc version, so if the compiler is updated v8 is re-built
382 # note: v8 requires gcc version GCC >= 4.6
383 my $gccVersion = `gcc --version | grep ^gcc | sed 's/^.* //g'`;
384 chomp( $gccVersion );
385 my $versionTextFile = $src_path . "/v8_" . $v8Version. "_" . $v8->{"build-mode"} . "_installed_built_with_gcc_". $gccVersion .".txt";
387 # use stat to see if file exists
388 my @install_stats = stat $versionTextFile;
389 if( (scalar(@install_stats)) && $v8->{"force-rebuild"} != 1 )
391 print("Correct V8 version installed\n");
396 # delete older versions of the version file first ( otherwise when downgrading it thinks version is still installed)
397 system( "rm " . $src_path . "/v8_*.txt >/dev/null 2>&1");
402 # Clone the v8 source repository and checkout the version we want
404 # Need to clone it from repo
405 my $v8_source_directory;
409 # newer version of v8 use depot_tools with gclient, git cloned builds do not work
410 if( $v8->{"use_depot_tools"} == 1)
412 install_google_depot_tools( $v8 );
414 # v8 is checkout out under depot_tools path
415 $v8_source_directory = $src_path . "/depot_tools/v8";
419 $v8_source_directory = $src_path . "/v8";
421 # delete the old v8 source directpry if exists
422 rmtree( $v8_source_directory );
424 # clone the repository
425 run_command( "git clone " . $v8->{"repo"} . " " . $v8_source_directory );
428 # change to the source directoy for the checkout
429 chdir( $v8_source_directory );
431 # checkout the version DALi is compatible with
432 run_command( "git checkout ". $v8Version );
435 # Run make dependencies then make for the specific target
437 if( $v8->{"use_depot_tools"} == 1)
439 run_command("gclient sync");
443 run_command("make dependencies");
446 # assemble the make command
447 my $makeCommand = $v8->{"make"};
449 # need to append architecture and build mode, e.g. x64.debug
451 if( $Config{use64bitint} ) {
452 print("Building 64 bit version of V8\n");
453 $buildTarget= "x64." . $v8->{"build-mode"}
456 print("Building 32 bit version of V8\n");
457 $buildTarget= "ia32." . $v8->{"build-mode"}
459 $makeCommand .= " " . $buildTarget;
460 print("Running: $makeCommand\n");
461 run_command( $makeCommand );
464 # Manually install the library / header files
467 # Need to manually install (make install not available on v8 )
468 my $libSourceDir = "$v8_source_directory/out/$buildTarget/lib.target/";
469 my $headerSourceDir = "$v8_source_directory/include/";
471 my $libDestinationDir = $install_path . "/lib/";
472 my $headerDestinationDir = $install_path . "/include/v8/";
474 # delete any current v8 libs
475 system( "rm " . $libDestinationDir . "libv8*");
476 system( "rm " . $libDestinationDir . "libicu*");
479 # copy the library and header files
480 dircopy( $libSourceDir, $libDestinationDir);
481 dircopy( $headerSourceDir, $headerDestinationDir);
484 # Copy libv8.so to libv8.so.version ( e.g. libv8.so.1.2.4)
485 my $v8SoFile = $libDestinationDir . "libv8.so";
486 my $v8SoVersionFile = $libDestinationDir . "libv8.so." . $v8Version;
487 move( $v8SoFile, $v8SoVersionFile );
489 # symlink the libv8.so.1.2.3 to libv8.so
490 symlink( $v8SoVersionFile, $v8SoFile );
491 print( "source dir = " . $libSourceDir . " dest dir ". $libDestinationDir . " \n" );
495 # Create the package file in,
496 # we keep the library files and header files in v8 sub-directories
498 my $fileContents = <<"END";
500 exec_prefix=\${prefix}
501 apiversion=$v8Version
502 libdir=\${exec_prefix}/lib
503 includedir=\${prefix}/include/v8
505 Name: v8 JavaScript engine - runtime library
506 Description: V8 is Google's open source JavaScript engine.
507 Version: \${apiversion}
508 Libs: -L\${libdir} -lv8 -licuuc -licui18n
509 Cflags: -I\${includedir}
512 my $filename = $install_path . "/lib/pkgconfig/" . "v8.pc";
513 print("writing to file ". $filename . "\n");
515 if( open( $fh, '>', $filename ) )
517 print { $fh } $fileContents;
522 die "failed to create " . $filename ."\n";
525 print("Installed V8 " .$v8Version . " OK\n");
531 open( $versionFile, '>', $versionTextFile );
532 close( $versionFile );
533 print("Installing V8 version $v8Version\n");
537 ################################################################################
539 ################################################################################
544 my $new_root = getcwd() . "/dali-env";
546 if($exec_path =~ m!dali-env/opt/bin!)
548 die "Already in a dali-env directory\n";
549 # Could query if user wants to re-create?
553 die "$root_path already exists\n";
557 die "A dali-env directory already exists here\n";
560 check_system_packages();
566 # do this after source directory structure created in create_env
567 check_source_packages();
575 die "$root_path does not exist\n";
579 die "$root_path is not an existing environment\n";
592 dali_env - Create the DALi environment for Ubuntu
596 dali_env [-c] [-s] [-h|-m]
604 Create a DALi environment directory in the current directory.
608 Display environment variables to setup.
616 Display the manual page
624 Gets the required dependencies for DALi and them to a local directory. Can also create a setenv script to point to the installation.