bt-oal/oal-adapter-mgr.c

   1 /*
   2  * Open Adaptation Layer (OAL)
   3  *
   4  * Copyright (c) 2014-2015 Samsung Electronics Co., Ltd.
   5  *
   6  * Licensed under the Apache License, Version 2.0 (the "License");
   7  * you may not use this file except in compliance with the License.
   8  * You may obtain a copy of the License at
   9  *
  10  * http://www.apache.org/licenses/LICENSE-2.0
  11  *
  12  * Unless required by applicable law or agreed to in writing, software
  13  * distributed under the License is distributed on an "AS IS" BASIS,
  14  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15  * See the License for the specific language governing permissions and
  16  * limitations under the License.
  17  *
  18  */
  19
  20 #include <stdio.h>
  21 #include <stdlib.h>
  22 #include <dlog.h>
  23 #include <string.h>
  24 #include <vconf.h>
  25 #include <sys/wait.h>
  26
  27 #include <bluetooth.h>
  28
  29 #include "oal-event.h"
  30 #include "oal-internal.h"
  31 #include "oal-manager.h"
  32 #include "oal-hardware.h"
  33 #include "oal-common.h"
  34 #include "oal-utils.h"
  35 #include "oal-gatt.h"
  36
  37 #define CHECK_MAX(max, x) (((max) > (x)) ? (x) : (max))
  38
  39 static const bt_interface_t * blued_api;
  40
  41 static bt_address_t local_address;
  42 static char local_name[BT_DEVICE_NAME_LENGTH_MAX + 1] = {'O', 'A', 'L', 0};
  43 static char local_version[BT_VERSION_STR_LEN_MAX + 1];
  44 static bt_scan_mode_t scan_mode = BT_SCAN_MODE_NONE;
  45 static int discoverable_timeout = 0;
  46
  47 /* Forward declarations */
  48 oal_status_t convert_to_oal_status(bt_status_t status);
  49 static gboolean retry_enable_adapter(gpointer data);
  50 #ifdef TIZEN_BT_HAL
  51 static gboolean retry_enable_le(gpointer data);
  52 #endif
  53 oal_status_t oal_mgr_init_internal(void);
  54
  55
  56 /* Callback registered with Stack */
  57 static void cb_adapter_state_change(bt_state_t status);
  58 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state);
  59 static void cb_adapter_device_found(int num_properties, bt_property_t *properties);
  60 static void cb_adapter_properties(bt_status_t status,
  61                 int num_properties, bt_property_t *properties);
  62 extern void cb_device_properties(bt_status_t status, bt_bdaddr_t *bd_addr,
  63                 int num_properties, bt_property_t *properties);
  64 extern void cb_device_bond_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  65                 bt_bond_state_t state);
  66 extern void cb_device_acl_state_changed(bt_status_t status, bt_bdaddr_t *remote_bd_addr,
  67                 bt_acl_state_t state);
  68 extern void cb_device_pin_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class);
  69 extern void cb_device_ssp_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class,
  70                         bt_ssp_variant_t pairing_variant, uint32_t pass_key);
  71 extern void cb_device_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_service_id_t service_d);
  72 extern void cb_device_trust_state_changed(bt_bdaddr_t *remote_bd_addr, bt_device_trust_state_t trusted);
  73 #ifdef TIZEN_BT_HAL
  74 extern void cb_socket_conn_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_uuid_t *uuid, uint8_t *name, uint8_t *path, uint32_t fd);
  75 static void cb_ble_state_change(bt_state_t status);
  76 extern void cb_device_le_conn_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  77                 bt_le_conn_state_t state);
  78 extern void cb_device_trusted_profiles_changed(bt_bdaddr_t *bd_addr, uint32_t trust_val);
  79 extern void cb_rssi_monitor_state_changed(bt_bdaddr_t *bd_addr, int32_t link_type, uint8_t state);
  80 extern void cb_rssi_alert(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t alert_type, int32_t rssi);
  81 extern void cb_raw_rssi_received(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t rssi);
  82 extern void cb_dbfw_plus_info_received(unsigned char *data, uint32_t length, uint8_t event_code);
  83 extern void cb_controller_error_received(uint8_t error_code);
  84 #endif
  85
  86 static bt_callbacks_t callbacks = {
  87         .size = sizeof(callbacks),
  88         .adapter_state_changed_cb = cb_adapter_state_change,
  89         .adapter_properties_cb = cb_adapter_properties,
  90         .remote_device_properties_cb = cb_device_properties,
  91         .device_found_cb = cb_adapter_device_found,
  92         .discovery_state_changed_cb = cb_adapter_discovery_state_changed,
  93         .pin_request_cb = cb_device_pin_request,
  94         .ssp_request_cb = cb_device_ssp_request,
  95         .bond_state_changed_cb = cb_device_bond_state_changed,
  96         .acl_state_changed_cb = cb_device_acl_state_changed,
  97         .thread_evt_cb = NULL,
  98         .dut_mode_recv_cb = NULL,
  99         .le_test_mode_cb = NULL,
 100         .energy_info_cb = NULL,
 101         .authorize_request_cb = cb_device_authorize_request,
 102         .device_trust_state_changed_cb = cb_device_trust_state_changed,
 103 #ifdef TIZEN_BT_HAL
 104         .socket_authorize_request_cb = cb_socket_conn_authorize_request,
 105         .le_state_changed_cb = cb_ble_state_change,
 106         .le_conn_state_changed_cb = cb_device_le_conn_state_changed,
 107         .device_trusted_profiles_changed_cb = cb_device_trusted_profiles_changed,
 108         .rssi_monitor_state_changed_cb = cb_rssi_monitor_state_changed,
 109         .rssi_alert_cb = cb_rssi_alert,
 110         .raw_rssi_received_cb = cb_raw_rssi_received,
 111         .dbfw_plus_info_received_cb = cb_dbfw_plus_info_received,
 112         .controller_error_received_cb = cb_controller_error_received,
 113 #endif
 114 };
 115
 116 oal_status_t adapter_mgr_init(const bt_interface_t * stack_if)
 117 {
 118         int ret;
 119         blued_api = stack_if;
 120
 121         ret = blued_api->init(&callbacks);
 122
 123         if (ret != BT_STATUS_SUCCESS) {
 124                 BT_ERR("Adapter callback registration failed: [%s]", status2string(ret));
 125                 blued_api->cleanup();
 126                 return convert_to_oal_status(ret);
 127         }
 128
 129         return OAL_STATUS_SUCCESS;
 130 }
 131
 132 const bt_interface_t* adapter_get_stack_interface(void)
 133 {
 134         return blued_api;
 135 }
 136
 137 void adapter_mgr_cleanup(void)
 138 {
 139         /* Nothing to clean yet , do not set blued_api NULL as it will be used to clean Bluedroid states */
 140         BT_DBG();
 141 }
 142
 143 #ifdef TIZEN_BT_HAL
 144 int oal_set_adapter_request_state(int enable)
 145 {
 146         return blued_api->set_hal_adapter_request_state(enable);
 147 }
 148
 149 int oal_set_le_request_state(int enable)
 150 {
 151         return blued_api->set_hal_le_request_state(enable);
 152 }
 153 #endif
 154
 155 oal_status_t adapter_enable(void)
 156 {
 157         int ret = BT_STATUS_SUCCESS;
 158
 159         API_TRACE();
 160
 161         if (blued_api == NULL) {
 162                 BT_INFO("Stack is initializing, so pending enable");
 163                 g_timeout_add(200, retry_enable_adapter, NULL);
 164                 return OAL_STATUS_PENDING;
 165         }
 166
 167         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 168                 g_timeout_add(200, retry_enable_adapter, NULL);
 169                 return OAL_STATUS_PENDING;
 170         }
 171
 172         ret = blued_api->enable();
 173
 174         if (ret != BT_STATUS_SUCCESS) {
 175                 BT_ERR("Enable failed: [%s]", status2string(ret));
 176                 return convert_to_oal_status(ret);
 177         }
 178
 179         return OAL_STATUS_SUCCESS;
 180 }
 181
 182 oal_status_t adapter_disable(void)
 183 {
 184         int ret;
 185
 186         API_TRACE();
 187
 188         CHECK_OAL_INITIALIZED();
 189
 190         ret = blued_api->disable();
 191
 192         if (ret != BT_STATUS_SUCCESS) {
 193                 BT_ERR("Disable failed: [%s]", status2string(ret));
 194                 return convert_to_oal_status(ret);
 195         }
 196         return OAL_STATUS_SUCCESS;
 197 }
 198
 199 oal_status_t le_enable(void)
 200 {
 201         int ret = BT_STATUS_SUCCESS;
 202
 203         API_TRACE();
 204         CHECK_OAL_INITIALIZED();
 205
 206 #ifdef TIZEN_BT_HAL
 207         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 208                 g_timeout_add(200, retry_enable_le, NULL);
 209                 return OAL_STATUS_PENDING;
 210         }
 211
 212         ret = blued_api->le_enable();
 213
 214         if (ret != BT_STATUS_SUCCESS) {
 215                 BT_ERR("Enable failed: [%s]", status2string(ret));
 216                 return convert_to_oal_status(ret);
 217         }
 218 #else
 219         BT_INFO("Not Supported");
 220         ret = OAL_STATUS_NOT_SUPPORT;
 221 #endif
 222
 223         return ret;
 224 }
 225
 226 oal_status_t le_disable(void)
 227 {
 228         int ret;
 229
 230         API_TRACE();
 231
 232         CHECK_OAL_INITIALIZED();
 233
 234 #ifdef TIZEN_BT_HAL
 235         ret = blued_api->le_disable();
 236
 237         if (ret != BT_STATUS_SUCCESS) {
 238                 BT_ERR("Disable failed: [%s]", status2string(ret));
 239                 return convert_to_oal_status(ret);
 240         }
 241 #else
 242         BT_INFO("Not Supported");
 243         ret = OAL_STATUS_NOT_SUPPORT;
 244 #endif
 245         return ret;
 246 }
 247
 248 oal_status_t le_init(void)
 249 {
 250         int ret = BT_STATUS_SUCCESS;
 251         API_TRACE();
 252         CHECK_OAL_INITIALIZED();
 253 #ifdef TIZEN_BT_HAL
 254         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 255                 g_timeout_add(200, retry_enable_le, NULL);
 256                 return OAL_STATUS_PENDING;
 257         }
 258         ret = blued_api->le_init();
 259         if (ret != BT_STATUS_SUCCESS) {
 260                 BT_ERR("Enable failed: [%s]", status2string(ret));
 261                 return convert_to_oal_status(ret);
 262         }
 263 #else
 264         BT_INFO("Not Supported");
 265         ret = OAL_STATUS_NOT_SUPPORT;
 266 #endif
 267         return ret;
 268 }
 269 oal_status_t le_deinit(void)
 270 {
 271         int ret = BT_STATUS_SUCCESS;
 272         API_TRACE();
 273         CHECK_OAL_INITIALIZED();
 274 #ifdef TIZEN_BT_HAL
 275         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 276                 g_timeout_add(200, retry_enable_le, NULL);
 277                 return OAL_STATUS_PENDING;
 278         }
 279         blued_api->le_deinit();
 280 #else
 281         BT_INFO("Not Supported");
 282         ret = OAL_STATUS_NOT_SUPPORT;
 283 #endif
 284         return ret;
 285 }
 286 oal_status_t is_advertising(void)
 287 {
 288         int ret = BT_STATUS_SUCCESS;
 289         API_TRACE();
 290         CHECK_OAL_INITIALIZED();
 291 #ifdef TIZEN_BT_HAL
 292         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 293                 g_timeout_add(200, retry_enable_le, NULL);
 294                 return OAL_STATUS_PENDING;
 295         }
 296         int r = blued_api->is_advertising();
 297         if (r == TRUE)
 298                 ret = BT_STATUS_SUCCESS;
 299         else
 300                 ret = BT_STATUS_FAIL;
 301 #else
 302         BT_INFO("Not Supported");
 303         ret = OAL_STATUS_NOT_SUPPORT;
 304 #endif
 305         return ret;
 306 }
 307 oal_status_t adapter_start_custom_inquiry(discovery_type_t disc_type)
 308 {
 309         int ret;
 310
 311         API_TRACE();
 312
 313         CHECK_OAL_INITIALIZED();
 314         BT_INFO("Custom Discovery Type [0x%x]", disc_type);
 315
 316 #ifdef TIZEN_BT_HAL
 317         ret = blued_api->start_custom_discovery(disc_type);
 318         if (ret != BT_STATUS_SUCCESS) {
 319                 BT_ERR("start_custom_discovery failed: [%s]", status2string(ret));
 320                 return convert_to_oal_status(ret);
 321         }
 322 #else
 323         BT_INFO("Not Supported");
 324         ret = OAL_STATUS_NOT_SUPPORT;
 325 #endif
 326         return ret;
 327 }
 328
 329 oal_status_t adapter_get_powered_status(gboolean *status)
 330 {
 331         int ret;
 332         unsigned char powered = 0;
 333
 334         API_TRACE();
 335
 336         CHECK_OAL_INITIALIZED();
 337
 338         OAL_CHECK_PARAMETER(status, return);
 339         BT_INFO("Get Adapter Powered status");
 340
 341 #ifdef TIZEN_BT_HAL
 342         ret = blued_api->get_adapter_powered_status(&powered);
 343         if (ret != BT_STATUS_SUCCESS) {
 344                 BT_ERR("adapter_get_powered_status failed: [%s]", status2string(ret));
 345                 *status = FALSE;
 346                 return convert_to_oal_status(ret);
 347         }
 348         if (powered == 1)
 349                 *status = TRUE;
 350         else
 351                 *status = FALSE;
 352 #else
 353         BT_INFO("Not Supported");
 354         ret = OAL_STATUS_NOT_SUPPORT;
 355 #endif
 356         return ret;
 357 }
 358
 359 oal_status_t adapter_reset(void)
 360 {
 361         int ret;
 362
 363         API_TRACE();
 364
 365         CHECK_OAL_INITIALIZED();
 366         BT_INFO("Adapter Reset");
 367
 368 #ifdef TIZEN_BT_HAL
 369         ret = blued_api->reset();
 370         if (ret != BT_STATUS_SUCCESS) {
 371                 BT_ERR("Adapter Reset failed: [%s]", status2string(ret));
 372                 return convert_to_oal_status(ret);
 373         }
 374 #else
 375         BT_INFO("Not Supported");
 376         ret = OAL_STATUS_NOT_SUPPORT;
 377 #endif
 378         return ret;
 379 }
 380
 381 oal_status_t adapter_recover(void)
 382 {
 383         int result;
 384
 385         API_TRACE();
 386
 387         CHECK_OAL_INITIALIZED();
 388         BT_INFO("Adapter Recover");
 389
 390         result = blued_api->recover();
 391         if (result != BT_STATUS_SUCCESS) {
 392                 BT_ERR("Adapter Recover Failed: [%s]", status2string(result));
 393                 return convert_to_oal_status(result);
 394         }
 395
 396         return result;
 397 }
 398
 399 oal_status_t adapter_start_inquiry(unsigned short duration)
 400 {
 401         int ret;
 402
 403         API_TRACE();
 404
 405         CHECK_OAL_INITIALIZED();
 406
 407         ret = blued_api->start_discovery();
 408         if (ret != BT_STATUS_SUCCESS) {
 409                 BT_ERR("start_discovery failed: [%s]", status2string(ret));
 410                 return convert_to_oal_status(ret);
 411         }
 412
 413         return OAL_STATUS_SUCCESS;
 414 }
 415
 416 oal_status_t adapter_stop_inquiry(void)
 417 {
 418         int ret;
 419
 420         API_TRACE();
 421
 422         CHECK_OAL_INITIALIZED();
 423
 424         ret = blued_api->cancel_discovery();
 425         if (ret != BT_STATUS_SUCCESS) {
 426                 BT_ERR("cancel_discovery failed: [%s]", status2string(ret));
 427                 return convert_to_oal_status(ret);
 428         }
 429
 430         return OAL_STATUS_SUCCESS;
 431 }
 432
 433 /* Callbacks from Stack */
 434 static void cb_adapter_state_change(bt_state_t status)
 435 {
 436         BT_DBG("+");
 437         oal_event_t event;
 438
 439         event = (BT_STATE_ON == status) ? OAL_EVENT_ADAPTER_ENABLED : OAL_EVENT_ADAPTER_DISABLED;
 440
 441         send_event(event, NULL, 0);
 442 }
 443
 444 #ifdef TIZEN_BT_HAL
 445 /* Callbacks from Stack */
 446 static void cb_ble_state_change(bt_state_t status)
 447 {
 448         BT_DBG("+");
 449         oal_event_t event;
 450
 451         event = (BT_STATE_ON == status) ? OAL_EVENT_BLE_ENABLED : OAL_EVENT_BLE_DISABLED;
 452
 453         send_event(event, NULL, 0);
 454 }
 455 #endif
 456
 457 static gboolean retry_enable_adapter(gpointer data)
 458 {
 459         adapter_enable();
 460         return FALSE;
 461 }
 462
 463 #ifdef TIZEN_BT_HAL
 464 static gboolean retry_enable_le(gpointer data)
 465 {
 466         le_enable();
 467         return FALSE;
 468 }
 469 #endif
 470 oal_status_t adapter_get_properties(void)
 471 {
 472         int ret;
 473
 474         API_TRACE();
 475         CHECK_OAL_INITIALIZED();
 476
 477         ret = blued_api->get_adapter_properties();
 478         if (ret != BT_STATUS_SUCCESS) {
 479                 BT_ERR("get_adapter_properties failed: [%s]", status2string(ret));
 480                 return convert_to_oal_status(ret);
 481         }
 482
 483         return OAL_STATUS_SUCCESS;
 484 }
 485
 486 oal_status_t adapter_get_address(void)
 487 {
 488         int ret;
 489
 490         API_TRACE();
 491         CHECK_OAL_INITIALIZED();
 492
 493         ret = blued_api->get_adapter_property(BT_PROPERTY_BDADDR);
 494         if (ret != BT_STATUS_SUCCESS) {
 495                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 496                 return convert_to_oal_status(ret);
 497         }
 498
 499         return OAL_STATUS_SUCCESS;
 500 }
 501
 502 oal_status_t adapter_get_version(void)
 503 {
 504         int ret;
 505
 506         API_TRACE();
 507         CHECK_OAL_INITIALIZED();
 508
 509         ret = blued_api->get_adapter_property(BT_PROPERTY_VERSION);
 510         if (ret != BT_STATUS_SUCCESS) {
 511                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 512                 return convert_to_oal_status(ret);
 513         }
 514
 515         return OAL_STATUS_SUCCESS;
 516 }
 517
 518 oal_status_t adapter_get_name(void)
 519 {
 520         int ret;
 521
 522         CHECK_OAL_INITIALIZED();
 523
 524         API_TRACE();
 525
 526         ret = blued_api->get_adapter_property(BT_PROPERTY_BDNAME);
 527         if (ret != BT_STATUS_SUCCESS) {
 528                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 529                 return convert_to_oal_status(ret);
 530         }
 531
 532         return OAL_STATUS_SUCCESS;
 533 }
 534
 535 oal_status_t adapter_get_connectable(void)
 536 {
 537         int ret;
 538
 539         CHECK_OAL_INITIALIZED();
 540
 541         API_TRACE();
 542
 543         ret = blued_api->get_adapter_property(BT_PROPERTY_ADAPTER_SCAN_MODE);
 544         if (ret != BT_STATUS_SUCCESS) {
 545                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 546                 return convert_to_oal_status(ret);
 547         }
 548
 549         return OAL_STATUS_SUCCESS;
 550 }
 551
 552 oal_status_t adapter_set_name(char * name)
 553 {
 554         int ret;
 555         bt_property_t prop;
 556
 557         CHECK_OAL_INITIALIZED();
 558
 559         OAL_CHECK_PARAMETER(name, return);
 560         API_TRACE("Name: %s", name);
 561
 562         prop.type = BT_PROPERTY_BDNAME;
 563         prop.len = strlen(name);
 564         prop.val = name;
 565
 566         ret = blued_api->set_adapter_property(&prop);
 567         if (ret != BT_STATUS_SUCCESS) {
 568                 BT_ERR("set_adapter_property: [%s]", status2string(ret));
 569                 ret = OAL_STATUS_INTERNAL_ERROR;
 570         } else
 571                 ret = OAL_STATUS_SUCCESS;
 572
 573         return ret;
 574 }
 575
 576 oal_status_t adapter_is_discoverable(int *p_discoverable)
 577 {
 578         OAL_CHECK_PARAMETER(p_discoverable, return);
 579
 580         *p_discoverable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 581
 582         API_TRACE("%d", *p_discoverable);
 583
 584         return OAL_STATUS_SUCCESS;
 585 }
 586
 587 oal_status_t adapter_is_connectable(int *p_connectable)
 588 {
 589         OAL_CHECK_PARAMETER(p_connectable, return);
 590
 591         *p_connectable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE)
 592                 || (scan_mode == BT_SCAN_MODE_CONNECTABLE);
 593
 594         API_TRACE("%d", *p_connectable);
 595
 596         return OAL_STATUS_SUCCESS;
 597 }
 598
 599 oal_status_t adapter_get_discoverable_timeout(int *p_timeout)
 600 {
 601         API_TRACE("%d", discoverable_timeout);
 602
 603         *p_timeout = discoverable_timeout;
 604
 605         return OAL_STATUS_SUCCESS;
 606 }
 607
 608 oal_status_t adapter_get_service_uuids(void)
 609 {
 610         int ret;
 611
 612         CHECK_OAL_INITIALIZED();
 613
 614         API_TRACE();
 615         ret = blued_api->get_adapter_property(BT_PROPERTY_UUIDS);
 616         if (ret != BT_STATUS_SUCCESS) {
 617                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 618                 return convert_to_oal_status(ret);
 619         }
 620         return OAL_STATUS_SUCCESS;
 621 }
 622
 623 oal_status_t adapter_get_bonded_devices(void)
 624 {
 625         int ret;
 626
 627         CHECK_OAL_INITIALIZED();
 628
 629         API_TRACE();
 630
 631         ret = blued_api->get_adapter_property(BT_PROPERTY_ADAPTER_BONDED_DEVICES);
 632         if (ret != BT_STATUS_SUCCESS) {
 633                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 634                 return convert_to_oal_status(ret);
 635         }
 636
 637         return OAL_STATUS_SUCCESS;
 638 }
 639
 640 static oal_status_t set_scan_mode(bt_scan_mode_t mode)
 641 {
 642         bt_property_t prop;
 643         int res;
 644
 645         BT_DBG("+");
 646
 647         CHECK_OAL_INITIALIZED();
 648
 649         prop.type = BT_PROPERTY_ADAPTER_SCAN_MODE;
 650         prop.len = sizeof(bt_scan_mode_t);
 651         prop.val = &mode;
 652         res = blued_api->set_adapter_property(&prop);
 653         if (res != BT_STATUS_SUCCESS) {
 654                 BT_ERR("set scan mode failed [%s]", status2string(res));
 655                 return convert_to_oal_status(res);
 656         }
 657
 658         BT_DBG("-");
 659         return OAL_STATUS_SUCCESS;
 660 }
 661
 662 oal_status_t adapter_set_connectable(int connectable)
 663 {
 664         bt_scan_mode_t mode;
 665
 666         API_TRACE("%d", connectable);
 667
 668         CHECK_OAL_INITIALIZED();
 669
 670         mode = connectable ? BT_SCAN_MODE_CONNECTABLE : BT_SCAN_MODE_NONE;
 671
 672         return set_scan_mode(mode);
 673 }
 674
 675 oal_status_t adapter_set_discoverable(void)
 676 {
 677         CHECK_OAL_INITIALIZED();
 678         API_TRACE();
 679
 680         return set_scan_mode(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 681 }
 682
 683 oal_status_t adapter_set_discoverable_timeout(int timeout)
 684 {
 685         bt_property_t prop;
 686         int res;
 687         uint32_t prop_val = timeout;
 688
 689         CHECK_OAL_INITIALIZED();
 690         API_TRACE("%d", timeout);
 691
 692         prop.type = BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT;
 693         prop.len = sizeof(prop_val);
 694         prop.val = &prop_val;
 695         res = blued_api->set_adapter_property(&prop);
 696         if (res != BT_STATUS_SUCCESS) {
 697                 BT_ERR("set_adapter_property failed [%s]", status2string(res));
 698                 return convert_to_oal_status(res);
 699         }
 700         return OAL_STATUS_SUCCESS;
 701 }
 702
 703 oal_status_t adapter_ble_set_filter_policy(int filter_policy)
 704 {
 705         int ret = OAL_STATUS_SUCCESS;
 706
 707         CHECK_OAL_INITIALIZED();
 708         API_TRACE();
 709
 710         BT_DBG("Filter policy applied is [%d]", filter_policy);
 711
 712         ret = gatts_set_filter_policy(filter_policy);
 713
 714         if (ret != OAL_STATUS_SUCCESS) {
 715                 BT_ERR("gatts_set_filter_policy: [%d]", ret);
 716                 return ret;
 717         }
 718
 719         return OAL_STATUS_SUCCESS;
 720 }
 721
 722 oal_status_t adapter_ble_multi_adv_update(int Ins_id, int min_intv, int max_intv,
 723                         int adv_type, int chnl_map, int tx_power, int timeout_s)
 724 {
 725         int res;
 726         CHECK_OAL_INITIALIZED();
 727         API_TRACE();
 728
 729         res = gatts_multi_adv_update(Ins_id, min_intv, max_intv,
 730                         adv_type, chnl_map, tx_power, timeout_s);
 731         if (res != OAL_STATUS_SUCCESS) {
 732                 BT_ERR("gatts_multi_adv_update: [%d]", res);
 733                 return res;
 734         }
 735         return OAL_STATUS_SUCCESS;
 736 }
 737
 738 oal_status_t adapter_ble_multi_adv_set_inst_data(int instance_id,
 739                         oal_ble_multi_adv_param_setup_t * adv_param_setup)
 740 {
 741         int res;
 742         CHECK_OAL_INITIALIZED();
 743         OAL_CHECK_PARAMETER(adv_param_setup, return);
 744
 745         API_TRACE();
 746
 747         res = gatts_multi_adv_set_inst_data(instance_id, adv_param_setup);
 748         if (res != OAL_STATUS_SUCCESS) {
 749                 BT_ERR("failed: [%d]", res);
 750                 return res;
 751         }
 752         return OAL_STATUS_SUCCESS;
 753 }
 754
 755 oal_status_t adapter_ble_multi_adv_enable(int instance_id)
 756 {
 757         int res;
 758         CHECK_OAL_INITIALIZED();
 759         API_TRACE();
 760
 761         res = gatts_multi_adv_enable(instance_id);
 762         if (res != OAL_STATUS_SUCCESS) {
 763                 BT_ERR("failed: [%d]", res);
 764                 return res;
 765         }
 766
 767         return OAL_STATUS_SUCCESS;
 768 }
 769
 770 oal_status_t adapter_ble_multi_adv_disable(int instance_id)
 771 {
 772         int res;
 773         CHECK_OAL_INITIALIZED();
 774         API_TRACE();
 775
 776         res = gatts_multi_adv_disable(instance_id);
 777         if (res != OAL_STATUS_SUCCESS) {
 778                 BT_ERR("failed: [%d]", res);
 779                 return res;
 780         }
 781
 782         return OAL_STATUS_SUCCESS;
 783 }
 784
 785 oal_status_t adapter_set_le_static_random_address(int enable)
 786 {
 787         int ret;
 788
 789         CHECK_OAL_INITIALIZED();
 790         API_TRACE("%d", enable);
 791
 792 #ifdef TIZEN_BT_HAL
 793         ret = blued_api->set_le_static_random_address((enable ? 1 : 0));
 794         if (ret != BT_STATUS_SUCCESS)
 795                 BT_ERR("Static address set failed: [%s]", status2string(ret));
 796         ret = convert_to_oal_status(ret);
 797 #else
 798         BT_INFO("Not Supported");
 799         ret = OAL_STATUS_NOT_SUPPORT;
 800 #endif
 801
 802         return ret;
 803 }
 804
 805 oal_status_t adapter_set_manufacturer_data(oal_manufacturer_data_t *m_data)
 806 {
 807         int ret;
 808
 809         CHECK_OAL_INITIALIZED();
 810         API_TRACE();
 811
 812         OAL_CHECK_PARAMETER(m_data, return);
 813         ret = blued_api->adapter_le_set_manufacturer_data((bt_manufacturer_data_t*)m_data);
 814         if (ret != BT_STATUS_SUCCESS)
 815                 BT_ERR("Setting manufacturer data Failed: [%s]",status2string(ret));
 816
 817         ret = convert_to_oal_status(ret);
 818         return ret;
 819 }
 820
 821 oal_status_t adapter_set_white_list(bt_address_t *device_address, int address_type, bool is_add)
 822 {
 823         int ret;
 824         bdstr_t bdstr;
 825
 826         CHECK_OAL_INITIALIZED();
 827         API_TRACE();
 828
 829         BT_INFO("BT remote device Address: %s", bdt_bd2str(device_address, &bdstr));
 830
 831         ret = blued_api->adapter_le_set_white_list((bt_bdaddr_t*)device_address, address_type, is_add);
 832         if (ret != BT_STATUS_SUCCESS) {
 833                 if(is_add)
 834                         BT_ERR("Add to White List Failed: [%s]",status2string(ret));
 835                 else
 836                         BT_ERR("Remove from White List Failed: [%s]",status2string(ret));
 837         }
 838         ret = convert_to_oal_status(ret);
 839         return ret;
 840 }
 841
 842 oal_status_t adapter_ble_set_privacy(int set_privacy)
 843 {
 844         int res;
 845
 846         CHECK_OAL_INITIALIZED();
 847         API_TRACE();
 848
 849         res = blued_api->adapter_le_set_privacy(set_privacy);
 850         if (res != BT_STATUS_SUCCESS)
 851                 BT_ERR("Setting LE Privacy Failed: [%s]", status2string(res));
 852         res = convert_to_oal_status(res);
 853
 854         return res;
 855 }
 856
 857 static void cb_adapter_properties(bt_status_t status,
 858                 int num_properties,
 859                 bt_property_t *properties)
 860 {
 861         int i;
 862
 863         BT_DBG("status: %d, count: %d", status, num_properties);
 864
 865         print_bt_properties(num_properties, properties);
 866
 867         if (status != BT_STATUS_SUCCESS) {
 868                 if (num_properties == 1) {
 869                         BT_ERR("Adapter Prop failed: status: [%s], count: %d, prop: %d",
 870                                 status2string(status), num_properties, properties[num_properties-1].type);
 871                 } else {
 872                         BT_ERR("Adapter Prop failed: status: [%s], count: %d", status2string(status), num_properties);
 873                 }
 874                 return;
 875         }
 876
 877         for (i = 0; i < num_properties; i++) {
 878                 BT_DBG("prop type %d, len %d", properties[i].type, properties[i].len);
 879                 switch (properties[i].type) {
 880                 case BT_PROPERTY_VERSION: {
 881                         g_strlcpy(local_version, properties[i].val, BT_VERSION_STR_LEN_MAX);
 882                         local_version[properties[i].len] = '\0';
 883
 884                         BT_DBG("Version: %s", local_version);
 885                         /* Send event to application */
 886                         if (num_properties == 1) {
 887                                 char *adapter_ver = g_strdup(local_version);
 888
 889                                 /* Application has requested this property SET/GET hence send EVENT */
 890                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_VERSION, adapter_ver, strlen(adapter_ver));
 891                         }
 892                         break;
 893                 }
 894                 case BT_PROPERTY_BDNAME: {
 895                         g_strlcpy(local_name, properties[i].val, BT_DEVICE_NAME_LENGTH_MAX);
 896                         local_name[properties[i].len] = '\0';
 897
 898                         BT_DBG("Name: %s", local_name);
 899                         /* Send event to application */
 900                         if (num_properties == 1) {
 901                                 char * adap_name = g_strdup(local_name);
 902
 903                                 /* Application has requested this property SET/GET hence send EVENT */
 904                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_NAME, adap_name, strlen(adap_name)+1);
 905                         }
 906                         break;
 907                 }
 908                 case BT_PROPERTY_BDADDR: {
 909                         bt_bdaddr_t * addr;
 910
 911                         addr =  properties[i].val;
 912                         memcpy(local_address.addr, addr->address, 6);
 913                         if (num_properties == 1) {
 914                                 /* Application has requested this property SET/GET hence send EVENT */
 915                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_ADDRESS,
 916                                                 g_memdup(&local_address, sizeof(local_address)),
 917                                                 sizeof(local_address));
 918                         }
 919                         break;
 920                 }
 921                 case BT_PROPERTY_UUIDS: {
 922                         int num_uuid;
 923
 924                         num_uuid = properties[i].len/sizeof(bt_uuid_t);
 925
 926                         BT_DBG("num_uuid: %d", num_uuid);
 927
 928                         /* Send event to application */
 929                         if (num_properties == 1) {
 930                                 event_adapter_services_t *uuids_event;
 931
 932                                 uuids_event = g_malloc(sizeof(event_adapter_services_t) + properties[i].len);
 933                                 memcpy(uuids_event->service_list, properties[i].val, properties[i].len);
 934                                 uuids_event->num = num_uuid;
 935
 936                                 /* Application has requested this property SET/GET hence send EVENT */
 937                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_SERVICES,
 938                                                 uuids_event, (sizeof(event_adapter_services_t) + num_uuid * sizeof(bt_uuid_t)));
 939                         }
 940                         break;
 941                 }
 942                 case BT_PROPERTY_ADAPTER_SCAN_MODE: {
 943                         bt_scan_mode_t cur_mode = *((bt_scan_mode_t *)properties[i].val);
 944
 945                         BT_INFO("Scan mode (%d)", cur_mode);
 946
 947                         scan_mode = cur_mode;
 948
 949                         /* Send event to application */
 950                         if (num_properties == 1) {
 951                                 oal_event_t event = OAL_EVENT_ADAPTER_MODE_NON_CONNECTABLE;
 952
 953                                 if (BT_SCAN_MODE_CONNECTABLE == cur_mode)
 954                                         event = OAL_EVENT_ADAPTER_MODE_CONNECTABLE;
 955                                 else if (BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE == cur_mode)
 956                                         event = OAL_EVENT_ADAPTER_MODE_DISCOVERABLE;
 957
 958                                 /* Application has requested this property SET/GET hence send EVENT */
 959                                 send_event(event, NULL, 0);
 960                         }
 961                         break;
 962                 }
 963                 case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: {
 964                         int timeout;
 965
 966                         timeout = *((uint32_t*)properties[i].val);
 967
 968                         BT_INFO("Discoverability timeout: %d", timeout);
 969                         discoverable_timeout = timeout;
 970
 971                         send_event(OAL_EVENT_ADAPTER_MODE_DISCOVERABLE_TIMEOUT,
 972                                         g_memdup(properties[i].val, sizeof(uint32_t)),
 973                                         sizeof(uint32_t));
 974                         break;
 975                 }
 976                 case BT_PROPERTY_ADAPTER_BONDED_DEVICES: {
 977                         int j;
 978                         int num_bonded;
 979                         bt_bdaddr_t *bonded_addr_list;
 980                         event_device_list_t *event_data;
 981
 982                         num_bonded = properties[i].len/sizeof(bt_bdaddr_t);
 983                         BT_DBG("num_bonded %d", num_bonded);
 984
 985                         if (num_properties > 1) /* No explicit req for this prop, ignore */
 986                                 break;
 987
 988                         bonded_addr_list = properties[i].val;
 989                         event_data = g_malloc(sizeof(event_device_list_t) + num_bonded*sizeof(bt_address_t));
 990                         event_data->num = num_bonded;
 991
 992                         for (j = 0; j < num_bonded; j++)
 993                                 memcpy(event_data->devices[j].addr, bonded_addr_list[j].address, 6);
 994
 995                         send_event(OAL_EVENT_ADAPTER_BONDED_DEVICE_LIST,
 996                                         event_data, (sizeof(event_device_list_t) + num_bonded * sizeof(bt_bdaddr_t)));
 997                         break;
 998                 }
 999                 case BT_PROPERTY_A2DP_ROLE: {
1000                         unsigned int a2dp_role;
1001
1002                         a2dp_role = *((uint32_t*)properties[i].val);
1003
1004                         BT_INFO("A2DP role: %u", a2dp_role);
1005
1006                         send_event(OAL_EVENT_ADAPTER_PROPERTY_A2DP_ROLE,
1007                                         g_memdup(properties[i].val, sizeof(uint32_t)),
1008                                         sizeof(uint32_t));
1009                         break;
1010                 }
1011                 case BT_PROPERTY_LOCAL_LE_FEATURES: {
1012                         event_adapter_le_features_t *le_features;
1013
1014                         le_features = g_malloc(sizeof(event_adapter_le_features_t));
1015
1016                         le_features->max_adv_instance = ((bt_local_le_features_t *)(properties[i].val))->max_adv_instance;
1017                         le_features->rpa_offloading = ((bt_local_le_features_t *)(properties[i].val))->rpa_offload_supported;
1018                         le_features->max_adv_filter = ((bt_local_le_features_t *)(properties[i].val))->max_adv_filter_supported;
1019                         le_features->le_2m_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
1020                         le_features->le_coded_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
1021
1022                         BT_INFO("LE 2M PHY Support (%d)", le_features->le_2m_phy_support);
1023                         BT_INFO("LE CODED PHY Support (%d)", le_features->le_coded_phy_support);
1024
1025                         send_event(OAL_EVENT_BLE_LOCAL_FEATURES,
1026                                         le_features,
1027                                         sizeof(event_adapter_le_features_t));
1028                         break;
1029                 }
1030                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STARTED: {
1031                         BT_INFO("LE Discovery started");
1032                         send_event(OAL_EVENT_BLE_DISCOVERY_STARTED, NULL, 0);
1033                         break;
1034                 }
1035                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STOPPED: {
1036                         BT_INFO("LE Discovery stopped");
1037                         send_event(OAL_EVENT_BLE_DISCOVERY_STOPPED, NULL, 0);
1038                         break;
1039                 }
1040                 default:
1041                          BT_WARN("Unhandled property: %d", properties[i].type);
1042                          break;
1043                 }
1044         }
1045 }
1046
1047 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state)
1048 {
1049         oal_event_t event;
1050
1051         event = (BT_DISCOVERY_STARTED == state) ? OAL_EVENT_ADAPTER_INQUIRY_STARTED : OAL_EVENT_ADAPTER_INQUIRY_FINISHED;
1052
1053         BT_DBG("%d", state);
1054         send_event(event, NULL, 0);
1055 }
1056
1057 static void cb_adapter_device_found(int num_properties, bt_property_t *properties)
1058 {
1059         remote_device_t dev_info;
1060         ble_adv_data_t adv_info;
1061         oal_event_t event;
1062         gpointer event_data;
1063         gsize size = 0;
1064         BT_DBG("+");
1065
1066         if (num_properties == 0) {
1067                 BT_ERR("Unexpected, properties count is zero!!");
1068                 return;
1069         }
1070
1071         memset(&dev_info, 0x00, sizeof(remote_device_t));
1072         memset(&adv_info, 0x00, sizeof(ble_adv_data_t));
1073
1074         print_bt_properties(num_properties, properties);
1075         parse_device_properties(num_properties, properties, &dev_info, &adv_info);
1076
1077         BT_INFO("number of properties= [%d] ", num_properties);
1078
1079         if (dev_info.type != DEV_TYPE_BREDR) {
1080                 /* BLE Single or DUAL mode found, so it should have Adv data */
1081                 event_ble_dev_found_t * ble_dev_event = g_new0(event_ble_dev_found_t, 1);
1082
1083                 ble_dev_event->adv_len = adv_info.len;
1084
1085                 if (adv_info.len > 0 && adv_info.adv_data) {
1086                         memcpy(ble_dev_event->adv_data, adv_info.adv_data, adv_info.len);
1087                         ble_dev_event->adv_len = adv_info.len;
1088                 } else
1089                         ble_dev_event->adv_len = 0;
1090
1091                 ble_dev_event->device_info = dev_info;
1092
1093                 event_data = ble_dev_event;
1094                 size = sizeof(event_ble_dev_found_t);
1095                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BLE;
1096         } else {
1097                 /* BREDR device, so No Adv data */
1098                 event_dev_found_t * dev_event = g_new0(event_dev_found_t, 1);
1099
1100                 memcpy(dev_event, &dev_info, sizeof(remote_device_t));
1101                 event_data = dev_event;
1102                 size = sizeof(remote_device_t);
1103                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BREDR_ONLY;
1104         }
1105
1106         send_event(event, event_data, size);
1107
1108         BT_DBG("-");
1109 }
1110
1111 void cb_controller_error_received(uint8_t error_code)
1112 {
1113         uint8_t *event_data;
1114
1115         BT_DBG("+");
1116
1117         event_data = g_new0(uint8_t, 1);
1118         *event_data = error_code;
1119
1120         send_event(OAL_EVENT_CONTROLLER_ERROR_RECEIVED,
1121                 (gpointer)event_data, sizeof(uint8_t));
1122
1123         BT_DBG("-");
1124 }