bt-oal/oal-adapter-mgr.c

   1 /*
   2  * Open Adaptation Layer (OAL)
   3  *
   4  * Copyright (c) 2014-2015 Samsung Electronics Co., Ltd.
   5  *
   6  * Licensed under the Apache License, Version 2.0 (the "License");
   7  * you may not use this file except in compliance with the License.
   8  * You may obtain a copy of the License at
   9  *
  10  * http://www.apache.org/licenses/LICENSE-2.0
  11  *
  12  * Unless required by applicable law or agreed to in writing, software
  13  * distributed under the License is distributed on an "AS IS" BASIS,
  14  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15  * See the License for the specific language governing permissions and
  16  * limitations under the License.
  17  *
  18  */
  19
  20 #include <stdio.h>
  21 #include <stdlib.h>
  22 #include <dlog.h>
  23 #include <string.h>
  24 #include <vconf.h>
  25 #include <sys/wait.h>
  26
  27 #include <bluetooth.h>
  28
  29 #include "oal-event.h"
  30 #include "oal-internal.h"
  31 #include "oal-manager.h"
  32 #include "oal-hardware.h"
  33 #include "oal-common.h"
  34 #include "oal-utils.h"
  35 #include "oal-gatt.h"
  36
  37 #define CHECK_MAX(max, x) (((max) > (x)) ? (x) : (max))
  38
  39 static const bt_interface_t * blued_api;
  40
  41 static bt_address_t local_address;
  42 static char local_name[BT_DEVICE_NAME_LENGTH_MAX + 1] = {'O', 'A', 'L', 0};
  43 static char local_version[BT_VERSION_STR_LEN_MAX + 1];
  44 static bt_scan_mode_t scan_mode = BT_SCAN_MODE_NONE;
  45 static int discoverable_timeout = 0;
  46
  47 /* Forward declarations */
  48 oal_status_t convert_to_oal_status(bt_status_t status);
  49 static gboolean retry_enable_adapter(gpointer data);
  50 #ifdef TIZEN_BT_HAL
  51 static gboolean retry_enable_le(gpointer data);
  52 #endif
  53 oal_status_t oal_mgr_init_internal(void);
  54
  55
  56 /* Callback registered with Stack */
  57 static void cb_adapter_state_change(bt_state_t status);
  58 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state);
  59 static void cb_adapter_device_found(int num_properties, bt_property_t *properties);
  60 static void cb_adapter_properties(bt_status_t status,
  61                 int num_properties, bt_property_t *properties);
  62 extern void cb_device_properties(bt_status_t status, bt_bdaddr_t *bd_addr,
  63                 int num_properties, bt_property_t *properties);
  64 extern void cb_device_bond_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  65                 bt_bond_state_t state);
  66 extern void cb_device_acl_state_changed(bt_status_t status, bt_bdaddr_t *remote_bd_addr,
  67                 bt_acl_state_t state);
  68 extern void cb_device_pin_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class);
  69 extern void cb_device_ssp_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class,
  70                         bt_ssp_variant_t pairing_variant, uint32_t pass_key);
  71 extern void cb_device_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_service_id_t service_d);
  72 extern void cb_device_trust_state_changed(bt_bdaddr_t *remote_bd_addr, bt_device_trust_state_t trusted);
  73 #ifdef TIZEN_BT_HAL
  74 extern void cb_socket_conn_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_uuid_t *uuid, uint8_t *name, uint8_t *path, uint32_t fd);
  75 static void cb_ble_state_change(bt_state_t status);
  76 extern void cb_device_le_conn_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  77                 bt_le_conn_state_t state);
  78 extern void cb_device_trusted_profiles_changed(bt_bdaddr_t *bd_addr, uint32_t trust_val);
  79 extern void cb_rssi_monitor_state_changed(bt_bdaddr_t *bd_addr, int32_t link_type, uint8_t state);
  80 extern void cb_rssi_alert(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t alert_type, int32_t rssi);
  81 extern void cb_raw_rssi_received(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t rssi);
  82 #endif
  83
  84 static bt_callbacks_t callbacks = {
  85         .size = sizeof(callbacks),
  86         .adapter_state_changed_cb = cb_adapter_state_change,
  87         .adapter_properties_cb = cb_adapter_properties,
  88         .remote_device_properties_cb = cb_device_properties,
  89         .device_found_cb = cb_adapter_device_found,
  90         .discovery_state_changed_cb = cb_adapter_discovery_state_changed,
  91         .pin_request_cb = cb_device_pin_request,
  92         .ssp_request_cb = cb_device_ssp_request,
  93         .bond_state_changed_cb = cb_device_bond_state_changed,
  94         .acl_state_changed_cb = cb_device_acl_state_changed,
  95         .thread_evt_cb = NULL,
  96         .dut_mode_recv_cb = NULL,
  97         .le_test_mode_cb = NULL,
  98         .energy_info_cb = NULL,
  99         .authorize_request_cb = cb_device_authorize_request,
 100         .device_trust_state_changed_cb = cb_device_trust_state_changed,
 101 #ifdef TIZEN_BT_HAL
 102         .socket_authorize_request_cb = cb_socket_conn_authorize_request,
 103         .le_state_changed_cb = cb_ble_state_change,
 104         .le_conn_state_changed_cb = cb_device_le_conn_state_changed,
 105         .device_trusted_profiles_changed_cb = cb_device_trusted_profiles_changed,
 106         .rssi_monitor_state_changed_cb = cb_rssi_monitor_state_changed,
 107         .rssi_alert_cb = cb_rssi_alert,
 108         .raw_rssi_received_cb = cb_raw_rssi_received,
 109 #endif
 110 };
 111
 112 oal_status_t adapter_mgr_init(const bt_interface_t * stack_if)
 113 {
 114         int ret;
 115         blued_api = stack_if;
 116
 117         ret = blued_api->init(&callbacks);
 118
 119         if (ret != BT_STATUS_SUCCESS) {
 120                 BT_ERR("Adapter callback registration failed: [%s]", status2string(ret));
 121                 blued_api->cleanup();
 122                 return convert_to_oal_status(ret);
 123         }
 124
 125         return OAL_STATUS_SUCCESS;
 126 }
 127
 128 const bt_interface_t* adapter_get_stack_interface(void)
 129 {
 130         return blued_api;
 131 }
 132
 133 void adapter_mgr_cleanup(void)
 134 {
 135         /* Nothing to clean yet , do not set blued_api NULL as it will be used to clean Bluedroid states */
 136         BT_DBG();
 137 }
 138
 139 #ifdef TIZEN_BT_HAL
 140 int oal_set_adapter_request_state(int enable)
 141 {
 142         return blued_api->set_hal_adapter_request_state(enable);
 143 }
 144
 145 int oal_set_le_request_state(int enable)
 146 {
 147         return blued_api->set_hal_le_request_state(enable);
 148 }
 149 #endif
 150
 151 oal_status_t adapter_enable(void)
 152 {
 153         int ret = BT_STATUS_SUCCESS;
 154
 155         API_TRACE();
 156
 157         if (blued_api == NULL) {
 158                 BT_INFO("Stack is initializing, so pending enable");
 159                 g_timeout_add(200, retry_enable_adapter, NULL);
 160                 return OAL_STATUS_PENDING;
 161         }
 162
 163         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 164                 g_timeout_add(200, retry_enable_adapter, NULL);
 165                 return OAL_STATUS_PENDING;
 166         }
 167
 168         ret = blued_api->enable();
 169
 170         if (ret != BT_STATUS_SUCCESS) {
 171                 BT_ERR("Enable failed: [%s]", status2string(ret));
 172                 return convert_to_oal_status(ret);
 173         }
 174
 175         return OAL_STATUS_SUCCESS;
 176 }
 177
 178 oal_status_t adapter_disable(void)
 179 {
 180         int ret;
 181
 182         API_TRACE();
 183
 184         CHECK_OAL_INITIALIZED();
 185
 186         ret = blued_api->disable();
 187
 188         if (ret != BT_STATUS_SUCCESS) {
 189                 BT_ERR("Disable failed: [%s]", status2string(ret));
 190                 return convert_to_oal_status(ret);
 191         }
 192         return OAL_STATUS_SUCCESS;
 193 }
 194
 195 oal_status_t le_enable(void)
 196 {
 197         int ret = BT_STATUS_SUCCESS;
 198
 199         API_TRACE();
 200         CHECK_OAL_INITIALIZED();
 201
 202 #ifdef TIZEN_BT_HAL
 203         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 204                 g_timeout_add(200, retry_enable_le, NULL);
 205                 return OAL_STATUS_PENDING;
 206         }
 207
 208         ret = blued_api->le_enable();
 209
 210         if (ret != BT_STATUS_SUCCESS) {
 211                 BT_ERR("Enable failed: [%s]", status2string(ret));
 212                 return convert_to_oal_status(ret);
 213         }
 214 #else
 215         BT_INFO("Not Supported");
 216         ret = OAL_STATUS_NOT_SUPPORT;
 217 #endif
 218
 219         return ret;
 220 }
 221
 222 oal_status_t le_disable(void)
 223 {
 224         int ret;
 225
 226         API_TRACE();
 227
 228         CHECK_OAL_INITIALIZED();
 229
 230 #ifdef TIZEN_BT_HAL
 231         ret = blued_api->le_disable();
 232
 233         if (ret != BT_STATUS_SUCCESS) {
 234                 BT_ERR("Disable failed: [%s]", status2string(ret));
 235                 return convert_to_oal_status(ret);
 236         }
 237 #else
 238         BT_INFO("Not Supported");
 239         ret = OAL_STATUS_NOT_SUPPORT;
 240 #endif
 241         return ret;
 242 }
 243
 244 oal_status_t le_init(void)
 245 {
 246         int ret = BT_STATUS_SUCCESS;
 247         API_TRACE();
 248         CHECK_OAL_INITIALIZED();
 249 #ifdef TIZEN_BT_HAL
 250         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 251                 g_timeout_add(200, retry_enable_le, NULL);
 252                 return OAL_STATUS_PENDING;
 253         }
 254         ret = blued_api->le_init();
 255         if (ret != BT_STATUS_SUCCESS) {
 256                 BT_ERR("Enable failed: [%s]", status2string(ret));
 257                 return convert_to_oal_status(ret);
 258         }
 259 #else
 260         BT_INFO("Not Supported");
 261         ret = OAL_STATUS_NOT_SUPPORT;
 262 #endif
 263         return ret;
 264 }
 265 oal_status_t le_deinit(void)
 266 {
 267         int ret = BT_STATUS_SUCCESS;
 268         API_TRACE();
 269         CHECK_OAL_INITIALIZED();
 270 #ifdef TIZEN_BT_HAL
 271         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 272                 g_timeout_add(200, retry_enable_le, NULL);
 273                 return OAL_STATUS_PENDING;
 274         }
 275         blued_api->le_deinit();
 276 #else
 277         BT_INFO("Not Supported");
 278         ret = OAL_STATUS_NOT_SUPPORT;
 279 #endif
 280         return ret;
 281 }
 282 oal_status_t is_advertising(void)
 283 {
 284         int ret = BT_STATUS_SUCCESS;
 285         API_TRACE();
 286         CHECK_OAL_INITIALIZED();
 287 #ifdef TIZEN_BT_HAL
 288         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 289                 g_timeout_add(200, retry_enable_le, NULL);
 290                 return OAL_STATUS_PENDING;
 291         }
 292         int r = blued_api->is_advertising();
 293         if (r == TRUE)
 294                 ret = BT_STATUS_SUCCESS;
 295         else
 296                 ret = BT_STATUS_FAIL;
 297 #else
 298         BT_INFO("Not Supported");
 299         ret = OAL_STATUS_NOT_SUPPORT;
 300 #endif
 301         return ret;
 302 }
 303 oal_status_t adapter_start_custom_inquiry(discovery_type_t disc_type)
 304 {
 305         int ret;
 306
 307         API_TRACE();
 308
 309         CHECK_OAL_INITIALIZED();
 310         BT_INFO("Custom Discovery Type [0x%x]", disc_type);
 311
 312 #ifdef TIZEN_BT_HAL
 313         ret = blued_api->start_custom_discovery(disc_type);
 314         if (ret != BT_STATUS_SUCCESS) {
 315                 BT_ERR("start_custom_discovery failed: [%s]", status2string(ret));
 316                 return convert_to_oal_status(ret);
 317         }
 318 #else
 319         BT_INFO("Not Supported");
 320         ret = OAL_STATUS_NOT_SUPPORT;
 321 #endif
 322         return ret;
 323 }
 324
 325 oal_status_t adapter_get_powered_status(gboolean *status)
 326 {
 327         int ret;
 328         unsigned char powered = 0;
 329
 330         API_TRACE();
 331
 332         CHECK_OAL_INITIALIZED();
 333
 334         OAL_CHECK_PARAMETER(status, return);
 335         BT_INFO("Get Adapter Powered status");
 336
 337 #ifdef TIZEN_BT_HAL
 338         ret = blued_api->get_adapter_powered_status(&powered);
 339         if (ret != BT_STATUS_SUCCESS) {
 340                 BT_ERR("adapter_get_powered_status failed: [%s]", status2string(ret));
 341                 *status = FALSE;
 342                 return convert_to_oal_status(ret);
 343         }
 344         if (powered == 1)
 345                 *status = TRUE;
 346         else
 347                 *status = FALSE;
 348 #else
 349         BT_INFO("Not Supported");
 350         ret = OAL_STATUS_NOT_SUPPORT;
 351 #endif
 352         return ret;
 353 }
 354
 355 oal_status_t adapter_reset(void)
 356 {
 357         int ret;
 358
 359         API_TRACE();
 360
 361         CHECK_OAL_INITIALIZED();
 362         BT_INFO("Adapter Reset");
 363
 364 #ifdef TIZEN_BT_HAL
 365         ret = blued_api->reset();
 366         if (ret != BT_STATUS_SUCCESS) {
 367                 BT_ERR("Adapter Reset failed: [%s]", status2string(ret));
 368                 return convert_to_oal_status(ret);
 369         }
 370 #else
 371         BT_INFO("Not Supported");
 372         ret = OAL_STATUS_NOT_SUPPORT;
 373 #endif
 374         return ret;
 375 }
 376
 377 oal_status_t adapter_start_inquiry(unsigned short duration)
 378 {
 379         int ret;
 380
 381         API_TRACE();
 382
 383         CHECK_OAL_INITIALIZED();
 384
 385         ret = blued_api->start_discovery();
 386         if (ret != BT_STATUS_SUCCESS) {
 387                 BT_ERR("start_discovery failed: [%s]", status2string(ret));
 388                 return convert_to_oal_status(ret);
 389         }
 390
 391         return OAL_STATUS_SUCCESS;
 392 }
 393
 394 oal_status_t adapter_stop_inquiry(void)
 395 {
 396         int ret;
 397
 398         API_TRACE();
 399
 400         CHECK_OAL_INITIALIZED();
 401
 402         ret = blued_api->cancel_discovery();
 403         if (ret != BT_STATUS_SUCCESS) {
 404                 BT_ERR("cancel_discovery failed: [%s]", status2string(ret));
 405                 return convert_to_oal_status(ret);
 406         }
 407
 408         return OAL_STATUS_SUCCESS;
 409 }
 410
 411 /* Callbacks from Stack */
 412 static void cb_adapter_state_change(bt_state_t status)
 413 {
 414         BT_DBG("+");
 415         oal_event_t event;
 416
 417         event = (BT_STATE_ON == status) ? OAL_EVENT_ADAPTER_ENABLED : OAL_EVENT_ADAPTER_DISABLED;
 418
 419         send_event(event, NULL, 0);
 420 }
 421
 422 #ifdef TIZEN_BT_HAL
 423 /* Callbacks from Stack */
 424 static void cb_ble_state_change(bt_state_t status)
 425 {
 426         BT_DBG("+");
 427         oal_event_t event;
 428
 429         event = (BT_STATE_ON == status) ? OAL_EVENT_BLE_ENABLED : OAL_EVENT_BLE_DISABLED;
 430
 431         send_event(event, NULL, 0);
 432 }
 433 #endif
 434
 435 static gboolean retry_enable_adapter(gpointer data)
 436 {
 437         adapter_enable();
 438         return FALSE;
 439 }
 440
 441 #ifdef TIZEN_BT_HAL
 442 static gboolean retry_enable_le(gpointer data)
 443 {
 444         le_enable();
 445         return FALSE;
 446 }
 447 #endif
 448 oal_status_t adapter_get_properties(void)
 449 {
 450         int ret;
 451
 452         API_TRACE();
 453         CHECK_OAL_INITIALIZED();
 454
 455         ret = blued_api->get_adapter_properties();
 456         if (ret != BT_STATUS_SUCCESS) {
 457                 BT_ERR("get_adapter_properties failed: [%s]", status2string(ret));
 458                 return convert_to_oal_status(ret);
 459         }
 460
 461         return OAL_STATUS_SUCCESS;
 462 }
 463
 464 oal_status_t adapter_get_address(void)
 465 {
 466         int ret;
 467
 468         API_TRACE();
 469         CHECK_OAL_INITIALIZED();
 470
 471         ret = blued_api->get_adapter_property(BT_PROPERTY_BDADDR);
 472         if (ret != BT_STATUS_SUCCESS) {
 473                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 474                 return convert_to_oal_status(ret);
 475         }
 476
 477         return OAL_STATUS_SUCCESS;
 478 }
 479
 480 oal_status_t adapter_get_version(void)
 481 {
 482         int ret;
 483
 484         API_TRACE();
 485         CHECK_OAL_INITIALIZED();
 486
 487         ret = blued_api->get_adapter_property(BT_PROPERTY_VERSION);
 488         if (ret != BT_STATUS_SUCCESS) {
 489                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 490                 return convert_to_oal_status(ret);
 491         }
 492
 493         return OAL_STATUS_SUCCESS;
 494 }
 495
 496 oal_status_t adapter_get_name(void)
 497 {
 498         int ret;
 499
 500         CHECK_OAL_INITIALIZED();
 501
 502         API_TRACE();
 503
 504         ret = blued_api->get_adapter_property(BT_PROPERTY_BDNAME);
 505         if (ret != BT_STATUS_SUCCESS) {
 506                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 507                 return convert_to_oal_status(ret);
 508         }
 509
 510         return OAL_STATUS_SUCCESS;
 511 }
 512
 513 oal_status_t adapter_set_name(char * name)
 514 {
 515         int ret;
 516         bt_property_t prop;
 517
 518         CHECK_OAL_INITIALIZED();
 519
 520         OAL_CHECK_PARAMETER(name, return);
 521         API_TRACE("Name: %s", name);
 522
 523         prop.type = BT_PROPERTY_BDNAME;
 524         prop.len = strlen(name);
 525         prop.val = name;
 526
 527         ret = blued_api->set_adapter_property(&prop);
 528         if (ret != BT_STATUS_SUCCESS) {
 529                 BT_ERR("set_adapter_property: [%s]", status2string(ret));
 530                 ret = OAL_STATUS_INTERNAL_ERROR;
 531         } else
 532                 ret = OAL_STATUS_SUCCESS;
 533
 534         return ret;
 535 }
 536
 537 oal_status_t adapter_is_discoverable(int *p_discoverable)
 538 {
 539         OAL_CHECK_PARAMETER(p_discoverable, return);
 540
 541         *p_discoverable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 542
 543         API_TRACE("%d", *p_discoverable);
 544
 545         return OAL_STATUS_SUCCESS;
 546 }
 547
 548 oal_status_t adapter_is_connectable(int *p_connectable)
 549 {
 550         OAL_CHECK_PARAMETER(p_connectable, return);
 551
 552         *p_connectable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE)
 553                 || (scan_mode == BT_SCAN_MODE_CONNECTABLE);
 554
 555         API_TRACE("%d", *p_connectable);
 556
 557         return OAL_STATUS_SUCCESS;
 558 }
 559
 560 oal_status_t adapter_get_discoverable_timeout(int *p_timeout)
 561 {
 562         API_TRACE("%d", discoverable_timeout);
 563
 564         *p_timeout = discoverable_timeout;
 565
 566         return OAL_STATUS_SUCCESS;
 567 }
 568
 569 oal_status_t adapter_get_service_uuids(void)
 570 {
 571         int ret;
 572
 573         CHECK_OAL_INITIALIZED();
 574
 575         API_TRACE();
 576         ret = blued_api->get_adapter_property(BT_PROPERTY_UUIDS);
 577         if (ret != BT_STATUS_SUCCESS) {
 578                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 579                 return convert_to_oal_status(ret);
 580         }
 581         return OAL_STATUS_SUCCESS;
 582 }
 583
 584 oal_status_t adapter_get_bonded_devices(void)
 585 {
 586         int ret;
 587
 588         CHECK_OAL_INITIALIZED();
 589
 590         API_TRACE();
 591
 592         ret = blued_api->get_adapter_property(BT_PROPERTY_ADAPTER_BONDED_DEVICES);
 593         if (ret != BT_STATUS_SUCCESS) {
 594                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 595                 return convert_to_oal_status(ret);
 596         }
 597
 598         return OAL_STATUS_SUCCESS;
 599 }
 600
 601 static oal_status_t set_scan_mode(bt_scan_mode_t mode)
 602 {
 603         bt_property_t prop;
 604         int res;
 605
 606         BT_DBG("+");
 607
 608         CHECK_OAL_INITIALIZED();
 609
 610         prop.type = BT_PROPERTY_ADAPTER_SCAN_MODE;
 611         prop.len = sizeof(bt_scan_mode_t);
 612         prop.val = &mode;
 613         res = blued_api->set_adapter_property(&prop);
 614         if (res != BT_STATUS_SUCCESS) {
 615                 BT_ERR("set scan mode failed [%s]", status2string(res));
 616                 return convert_to_oal_status(res);
 617         }
 618
 619         BT_DBG("-");
 620         return OAL_STATUS_SUCCESS;
 621 }
 622
 623 oal_status_t adapter_set_connectable(int connectable)
 624 {
 625         bt_scan_mode_t mode;
 626
 627         API_TRACE("%d", connectable);
 628
 629         CHECK_OAL_INITIALIZED();
 630
 631         mode = connectable ? BT_SCAN_MODE_CONNECTABLE : BT_SCAN_MODE_NONE;
 632
 633         return set_scan_mode(mode);
 634 }
 635
 636 oal_status_t adapter_set_discoverable(void)
 637 {
 638         CHECK_OAL_INITIALIZED();
 639         API_TRACE();
 640
 641         return set_scan_mode(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 642 }
 643
 644 oal_status_t adapter_set_discoverable_timeout(int timeout)
 645 {
 646         bt_property_t prop;
 647         int res;
 648         uint32_t prop_val = timeout;
 649
 650         CHECK_OAL_INITIALIZED();
 651         API_TRACE("%d", timeout);
 652
 653         prop.type = BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT;
 654         prop.len = sizeof(prop_val);
 655         prop.val = &prop_val;
 656         res = blued_api->set_adapter_property(&prop);
 657         if (res != BT_STATUS_SUCCESS) {
 658                 BT_ERR("set_adapter_property failed [%s]", status2string(res));
 659                 return convert_to_oal_status(res);
 660         }
 661         return OAL_STATUS_SUCCESS;
 662 }
 663
 664 oal_status_t adapter_ble_multi_adv_update(int Ins_id, int min_intv, int max_intv,
 665                         int adv_type, int chnl_map, int tx_power, int timeout_s)
 666 {
 667         int res;
 668         CHECK_OAL_INITIALIZED();
 669         API_TRACE();
 670
 671         res = gatts_multi_adv_update(Ins_id, min_intv, max_intv,
 672                         adv_type, chnl_map, tx_power, timeout_s);
 673         if (res != OAL_STATUS_SUCCESS) {
 674                 BT_ERR("gatts_multi_adv_update: [%d]", res);
 675                 return res;
 676         }
 677         return OAL_STATUS_SUCCESS;
 678 }
 679
 680 oal_status_t adapter_ble_multi_adv_set_inst_data(int instance_id,
 681                         oal_ble_multi_adv_param_setup_t * adv_param_setup)
 682 {
 683         int res;
 684         CHECK_OAL_INITIALIZED();
 685         OAL_CHECK_PARAMETER(adv_param_setup, return);
 686
 687         API_TRACE();
 688
 689         res = gatts_multi_adv_set_inst_data(instance_id, adv_param_setup);
 690         if (res != OAL_STATUS_SUCCESS) {
 691                 BT_ERR("failed: [%d]", res);
 692                 return res;
 693         }
 694         return OAL_STATUS_SUCCESS;
 695 }
 696
 697 oal_status_t adapter_ble_multi_adv_enable(int instance_id)
 698 {
 699         int res;
 700         CHECK_OAL_INITIALIZED();
 701         API_TRACE();
 702
 703         res = gatts_multi_adv_enable(instance_id);
 704         if (res != OAL_STATUS_SUCCESS) {
 705                 BT_ERR("failed: [%d]", res);
 706                 return res;
 707         }
 708
 709         return OAL_STATUS_SUCCESS;
 710 }
 711
 712 oal_status_t adapter_ble_multi_adv_disable(int instance_id)
 713 {
 714         int res;
 715         CHECK_OAL_INITIALIZED();
 716         API_TRACE();
 717
 718         res = gatts_multi_adv_disable(instance_id);
 719         if (res != OAL_STATUS_SUCCESS) {
 720                 BT_ERR("failed: [%d]", res);
 721                 return res;
 722         }
 723
 724         return OAL_STATUS_SUCCESS;
 725 }
 726
 727 oal_status_t adapter_set_le_static_random_address(int enable)
 728 {
 729         int ret;
 730
 731         CHECK_OAL_INITIALIZED();
 732         API_TRACE("%d", enable);
 733
 734 #ifdef TIZEN_BT_HAL
 735         ret = blued_api->set_le_static_random_address((enable ? 1 : 0));
 736         if (ret != BT_STATUS_SUCCESS)
 737                 BT_ERR("Static address set failed: [%s]", status2string(ret));
 738         ret = convert_to_oal_status(ret);
 739 #else
 740         BT_INFO("Not Supported");
 741         ret = OAL_STATUS_NOT_SUPPORT;
 742 #endif
 743
 744         return ret;
 745 }
 746
 747 oal_status_t adapter_set_manufacturer_data(oal_manufacturer_data_t *m_data)
 748 {
 749         int ret;
 750
 751         CHECK_OAL_INITIALIZED();
 752         API_TRACE();
 753
 754         OAL_CHECK_PARAMETER(m_data, return);
 755         ret = blued_api->adapter_le_set_manufacturer_data((bt_manufacturer_data_t*)m_data);
 756         if (ret != BT_STATUS_SUCCESS)
 757                 BT_ERR("Setting manufacturer data Failed: [%s]",status2string(ret));
 758
 759         ret = convert_to_oal_status(ret);
 760         return ret;
 761 }
 762
 763 oal_status_t adapter_set_white_list(bt_address_t *device_address, int address_type, bool is_add)
 764 {
 765         int ret;
 766         bdstr_t bdstr;
 767
 768         CHECK_OAL_INITIALIZED();
 769         API_TRACE();
 770
 771         BT_INFO("BT remote device Address: %s", bdt_bd2str(device_address, &bdstr));
 772
 773         ret = blued_api->adapter_le_set_white_list((bt_bdaddr_t*)device_address, address_type, is_add);
 774         if (ret != BT_STATUS_SUCCESS) {
 775                 if(is_add)
 776                         BT_ERR("Add to White List Failed: [%s]",status2string(ret));
 777                 else
 778                         BT_ERR("Remove from White List Failed: [%s]",status2string(ret));
 779         }
 780         ret = convert_to_oal_status(ret);
 781         return ret;
 782 }
 783
 784 oal_status_t adapter_ble_set_privacy(int set_privacy)
 785 {
 786         int res;
 787
 788         CHECK_OAL_INITIALIZED();
 789         API_TRACE();
 790
 791         res = blued_api->adapter_le_set_privacy(set_privacy);
 792         if (res != BT_STATUS_SUCCESS)
 793                 BT_ERR("Setting LE Privacy Failed: [%s]", status2string(res));
 794         res = convert_to_oal_status(res);
 795
 796         return res;
 797 }
 798
 799 static void cb_adapter_properties(bt_status_t status,
 800                 int num_properties,
 801                 bt_property_t *properties)
 802 {
 803         int i;
 804
 805         BT_DBG("status: %d, count: %d", status, num_properties);
 806
 807         print_bt_properties(num_properties, properties);
 808
 809         if (status != BT_STATUS_SUCCESS) {
 810                 if (num_properties == 1) {
 811                         BT_ERR("Adapter Prop failed: status: [%s], count: %d, prop: %d",
 812                                 status2string(status), num_properties, properties[num_properties-1].type);
 813                 } else {
 814                         BT_ERR("Adapter Prop failed: status: [%s], count: %d", status2string(status), num_properties);
 815                 }
 816                 return;
 817         }
 818
 819         for (i = 0; i < num_properties; i++) {
 820                 BT_DBG("prop type %d, len %d", properties[i].type, properties[i].len);
 821                 switch (properties[i].type) {
 822                 case BT_PROPERTY_VERSION: {
 823                         g_strlcpy(local_version, properties[i].val, BT_VERSION_STR_LEN_MAX);
 824                         local_version[properties[i].len] = '\0';
 825
 826                         BT_DBG("Version: %s", local_version);
 827                         /* Send event to application */
 828                         if (num_properties == 1) {
 829                                 char *adapter_ver = g_strdup(local_version);
 830
 831                                 /* Application has requested this property SET/GET hence send EVENT */
 832                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_VERSION, adapter_ver, strlen(adapter_ver));
 833                         }
 834                         break;
 835                 }
 836                 case BT_PROPERTY_BDNAME: {
 837                         g_strlcpy(local_name, properties[i].val, BT_DEVICE_NAME_LENGTH_MAX);
 838                         local_name[properties[i].len] = '\0';
 839
 840                         BT_DBG("Name: %s", local_name);
 841                         /* Send event to application */
 842                         if (num_properties == 1) {
 843                                 char * adap_name = g_strdup(local_name);
 844
 845                                 /* Application has requested this property SET/GET hence send EVENT */
 846                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_NAME, adap_name, strlen(adap_name)+1);
 847                         }
 848                         break;
 849                 }
 850                 case BT_PROPERTY_BDADDR: {
 851                         bt_bdaddr_t * addr;
 852
 853                         addr =  properties[i].val;
 854                         memcpy(local_address.addr, addr->address, 6);
 855                         if (num_properties == 1) {
 856                                 /* Application has requested this property SET/GET hence send EVENT */
 857                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_ADDRESS,
 858                                                 g_memdup(&local_address, sizeof(local_address)),
 859                                                 sizeof(local_address));
 860                         }
 861                         break;
 862                 }
 863                 case BT_PROPERTY_UUIDS: {
 864                         int num_uuid;
 865
 866                         num_uuid = properties[i].len/sizeof(bt_uuid_t);
 867
 868                         BT_DBG("num_uuid: %d", num_uuid);
 869
 870                         /* Send event to application */
 871                         if (num_properties == 1) {
 872                                 event_adapter_services_t *uuids_event;
 873
 874                                 uuids_event = g_malloc(sizeof(event_adapter_services_t) + properties[i].len);
 875                                 memcpy(uuids_event->service_list, properties[i].val, properties[i].len);
 876                                 uuids_event->num = num_uuid;
 877
 878                                 /* Application has requested this property SET/GET hence send EVENT */
 879                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_SERVICES,
 880                                                 uuids_event, (sizeof(event_adapter_services_t) + num_uuid * sizeof(bt_uuid_t)));
 881                         }
 882                         break;
 883                 }
 884                 case BT_PROPERTY_ADAPTER_SCAN_MODE: {
 885                         bt_scan_mode_t cur_mode = *((bt_scan_mode_t *)properties[i].val);
 886
 887                         BT_INFO("Scan mode (%d)", cur_mode);
 888
 889                         scan_mode = cur_mode;
 890
 891                         /* Send event to application */
 892                         if (num_properties == 1) {
 893                                 oal_event_t event = OAL_EVENT_ADAPTER_MODE_NON_CONNECTABLE;
 894
 895                                 if (BT_SCAN_MODE_CONNECTABLE == cur_mode)
 896                                         event = OAL_EVENT_ADAPTER_MODE_CONNECTABLE;
 897                                 else if (BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE == cur_mode)
 898                                         event = OAL_EVENT_ADAPTER_MODE_DISCOVERABLE;
 899
 900                                 /* Application has requested this property SET/GET hence send EVENT */
 901                                 send_event(event, NULL, 0);
 902                         }
 903                         break;
 904                 }
 905                 case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: {
 906                         int timeout;
 907
 908                         timeout = *((uint32_t*)properties[i].val);
 909
 910                         BT_INFO("Discoverability timeout: %d", timeout);
 911                         discoverable_timeout = timeout;
 912
 913                         send_event(OAL_EVENT_ADAPTER_MODE_DISCOVERABLE_TIMEOUT,
 914                                         g_memdup(properties[i].val, sizeof(uint32_t)),
 915                                         sizeof(uint32_t));
 916                         break;
 917                 }
 918                 case BT_PROPERTY_ADAPTER_BONDED_DEVICES: {
 919                         int j;
 920                         int num_bonded;
 921                         bt_bdaddr_t *bonded_addr_list;
 922                         event_device_list_t *event_data;
 923
 924                         num_bonded = properties[i].len/sizeof(bt_bdaddr_t);
 925                         BT_DBG("num_bonded %d", num_bonded);
 926
 927                         if (num_properties > 1) /* No explicit req for this prop, ignore */
 928                                 break;
 929
 930                         bonded_addr_list = properties[i].val;
 931                         event_data = g_malloc(sizeof(event_device_list_t) + num_bonded*sizeof(bt_address_t));
 932                         event_data->num = num_bonded;
 933
 934                         for (j = 0; j < num_bonded; j++)
 935                                 memcpy(event_data->devices[j].addr, bonded_addr_list[j].address, 6);
 936
 937                         send_event(OAL_EVENT_ADAPTER_BONDED_DEVICE_LIST,
 938                                         event_data, (sizeof(event_device_list_t) + num_bonded * sizeof(bt_bdaddr_t)));
 939                         break;
 940                 }
 941                 case BT_PROPERTY_A2DP_ROLE: {
 942                         unsigned int a2dp_role;
 943
 944                         a2dp_role = *((uint32_t*)properties[i].val);
 945
 946                         BT_INFO("A2DP role: %u", a2dp_role);
 947
 948                         send_event(OAL_EVENT_ADAPTER_PROPERTY_A2DP_ROLE,
 949                                         g_memdup(properties[i].val, sizeof(uint32_t)),
 950                                         sizeof(uint32_t));
 951                         break;
 952                 }
 953                 case BT_PROPERTY_LOCAL_LE_FEATURES: {
 954                         event_adapter_le_features_t *le_features;
 955
 956                         le_features = g_malloc(sizeof(event_adapter_le_features_t));
 957
 958                         le_features->max_adv_instance = ((bt_local_le_features_t *)(properties[i].val))->max_adv_instance;
 959                         le_features->rpa_offloading = ((bt_local_le_features_t *)(properties[i].val))->rpa_offload_supported;
 960                         le_features->max_adv_filter = ((bt_local_le_features_t *)(properties[i].val))->max_adv_filter_supported;
 961                         le_features->le_2m_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
 962                         le_features->le_coded_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
 963
 964                         BT_INFO("LE 2M PHY Support (%d)", le_features->le_2m_phy_support);
 965                         BT_INFO("LE CODED PHY Support (%d)", le_features->le_coded_phy_support);
 966
 967                         send_event(OAL_EVENT_BLE_LOCAL_FEATURES,
 968                                         le_features,
 969                                         sizeof(event_adapter_le_features_t));
 970                         break;
 971                 }
 972                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STARTED: {
 973                         BT_INFO("LE Discovery started");
 974                         send_event(OAL_EVENT_BLE_DISCOVERY_STARTED, NULL, 0);
 975                         break;
 976                 }
 977                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STOPPED: {
 978                         BT_INFO("LE Discovery stopped");
 979                         send_event(OAL_EVENT_BLE_DISCOVERY_STOPPED, NULL, 0);
 980                         break;
 981                 }
 982                 default:
 983                          BT_WARN("Unhandled property: %d", properties[i].type);
 984                          break;
 985                 }
 986         }
 987 }
 988
 989 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state)
 990 {
 991         oal_event_t event;
 992
 993         event = (BT_DISCOVERY_STARTED == state) ? OAL_EVENT_ADAPTER_INQUIRY_STARTED : OAL_EVENT_ADAPTER_INQUIRY_FINISHED;
 994
 995         BT_DBG("%d", state);
 996         send_event(event, NULL, 0);
 997 }
 998
 999 static void cb_adapter_device_found(int num_properties, bt_property_t *properties)
1000 {
1001         remote_device_t dev_info;
1002         ble_adv_data_t adv_info;
1003         oal_event_t event;
1004         gpointer event_data;
1005         gsize size = 0;
1006         BT_DBG("+");
1007
1008         if (num_properties == 0) {
1009                 BT_ERR("Unexpected, properties count is zero!!");
1010                 return;
1011         }
1012
1013         memset(&dev_info, 0x00, sizeof(remote_device_t));
1014         memset(&adv_info, 0x00, sizeof(ble_adv_data_t));
1015
1016         print_bt_properties(num_properties, properties);
1017         parse_device_properties(num_properties, properties, &dev_info, &adv_info);
1018
1019         BT_INFO("number of properties= [%d] ", num_properties);
1020
1021         if (dev_info.type != DEV_TYPE_BREDR) {
1022                 /* BLE Single or DUAL mode found, so it should have Adv data */
1023                 event_ble_dev_found_t * ble_dev_event = g_new0(event_ble_dev_found_t, 1);
1024
1025                 ble_dev_event->adv_len = adv_info.len;
1026
1027                 if (adv_info.len > 0 && adv_info.adv_data) {
1028                         memcpy(ble_dev_event->adv_data, adv_info.adv_data, adv_info.len);
1029                         ble_dev_event->adv_len = adv_info.len;
1030                 } else
1031                         ble_dev_event->adv_len = 0;
1032
1033                 ble_dev_event->device_info = dev_info;
1034
1035                 event_data = ble_dev_event;
1036                 size = sizeof(event_ble_dev_found_t);
1037                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BLE;
1038         } else {
1039                 /* BREDR device, so No Adv data */
1040                 event_dev_found_t * dev_event = g_new0(event_dev_found_t, 1);
1041
1042                 memcpy(dev_event, &dev_info, sizeof(remote_device_t));
1043                 event_data = dev_event;
1044                 size = sizeof(remote_device_t);
1045                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BREDR_ONLY;
1046         }
1047
1048         send_event(event, event_data, size);
1049
1050         BT_DBG("-");
1051 }