bt-oal/oal-adapter-mgr.c

   1 /*
   2  * Open Adaptation Layer (OAL)
   3  *
   4  * Copyright (c) 2014-2015 Samsung Electronics Co., Ltd.
   5  *
   6  * Licensed under the Apache License, Version 2.0 (the "License");
   7  * you may not use this file except in compliance with the License.
   8  * You may obtain a copy of the License at
   9  *
  10  * http://www.apache.org/licenses/LICENSE-2.0
  11  *
  12  * Unless required by applicable law or agreed to in writing, software
  13  * distributed under the License is distributed on an "AS IS" BASIS,
  14  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15  * See the License for the specific language governing permissions and
  16  * limitations under the License.
  17  *
  18  */
  19
  20 #include <stdio.h>
  21 #include <stdlib.h>
  22 #include <dlog.h>
  23 #include <string.h>
  24 #include <vconf.h>
  25 #include <sys/wait.h>
  26
  27 #include <bluetooth.h>
  28
  29 #include "oal-event.h"
  30 #include "oal-internal.h"
  31 #include "oal-manager.h"
  32 #include "oal-hardware.h"
  33 #include "oal-common.h"
  34 #include "oal-utils.h"
  35 #include "oal-gatt.h"
  36
  37 #define CHECK_MAX(max, x) (((max) > (x)) ? (x) : (max))
  38
  39 static const bt_interface_t * blued_api;
  40
  41 static bt_address_t local_address;
  42 static char local_name[BT_DEVICE_NAME_LENGTH_MAX + 1] = {'O', 'A', 'L', 0};
  43 static char local_version[BT_VERSION_STR_LEN_MAX + 1];
  44 static bt_scan_mode_t scan_mode = BT_SCAN_MODE_NONE;
  45 static int discoverable_timeout = 0;
  46
  47 /* Forward declarations */
  48 oal_status_t convert_to_oal_status(bt_status_t status);
  49 static gboolean retry_enable_adapter(gpointer data);
  50 #ifdef TIZEN_BT_HAL
  51 static gboolean retry_enable_le(gpointer data);
  52 #endif
  53 oal_status_t oal_mgr_init_internal(void);
  54
  55
  56 /* Callback registered with Stack */
  57 static void cb_adapter_state_change(bt_state_t status);
  58 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state);
  59 static void cb_adapter_device_found(int num_properties, bt_property_t *properties);
  60 static void cb_adapter_properties(bt_status_t status,
  61                 int num_properties, bt_property_t *properties);
  62 extern void cb_device_properties(bt_status_t status, bt_bdaddr_t *bd_addr,
  63                 int num_properties, bt_property_t *properties);
  64 extern void cb_device_bond_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  65                 bt_bond_state_t state);
  66 extern void cb_device_acl_state_changed(bt_status_t status, bt_bdaddr_t *remote_bd_addr,
  67                 bt_acl_state_t state);
  68 extern void cb_device_pin_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class);
  69 extern void cb_device_ssp_request(bt_bdaddr_t *bd_addr, bt_bdname_t *bdname, uint32_t device_class,
  70                         bt_ssp_variant_t pairing_variant, uint32_t pass_key);
  71 extern void cb_device_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_service_id_t service_d);
  72 extern void cb_device_trust_state_changed(bt_bdaddr_t *remote_bd_addr, bt_device_trust_state_t trusted);
  73 #ifdef TIZEN_BT_HAL
  74 extern void cb_socket_conn_authorize_request(bt_bdaddr_t *remote_bd_addr, bt_uuid_t *uuid, uint8_t *name, uint8_t *path, uint32_t fd);
  75 static void cb_ble_state_change(bt_state_t status);
  76 extern void cb_device_le_conn_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr,
  77                 bt_le_conn_state_t state);
  78 extern void cb_device_trusted_profiles_changed(bt_bdaddr_t *bd_addr, uint32_t trust_val);
  79 extern void cb_rssi_monitor_state_changed(bt_bdaddr_t *bd_addr, int32_t link_type, uint8_t state);
  80 extern void cb_rssi_alert(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t alert_type, int32_t rssi);
  81 extern void cb_raw_rssi_received(bt_bdaddr_t *bd_addr, int32_t link_type, int32_t rssi);
  82 #endif
  83
  84 static bt_callbacks_t callbacks = {
  85         .size = sizeof(callbacks),
  86         .adapter_state_changed_cb = cb_adapter_state_change,
  87         .adapter_properties_cb = cb_adapter_properties,
  88         .remote_device_properties_cb = cb_device_properties,
  89         .device_found_cb = cb_adapter_device_found,
  90         .discovery_state_changed_cb = cb_adapter_discovery_state_changed,
  91         .pin_request_cb = cb_device_pin_request,
  92         .ssp_request_cb = cb_device_ssp_request,
  93         .bond_state_changed_cb = cb_device_bond_state_changed,
  94         .acl_state_changed_cb = cb_device_acl_state_changed,
  95         .thread_evt_cb = NULL,
  96         .dut_mode_recv_cb = NULL,
  97         .le_test_mode_cb = NULL,
  98         .energy_info_cb = NULL,
  99         .authorize_request_cb = cb_device_authorize_request,
 100         .device_trust_state_changed_cb = cb_device_trust_state_changed,
 101 #ifdef TIZEN_BT_HAL
 102         .socket_authorize_request_cb = cb_socket_conn_authorize_request,
 103         .le_state_changed_cb = cb_ble_state_change,
 104         .le_conn_state_changed_cb = cb_device_le_conn_state_changed,
 105         .device_trusted_profiles_changed_cb = cb_device_trusted_profiles_changed,
 106         .rssi_monitor_state_changed_cb = cb_rssi_monitor_state_changed,
 107         .rssi_alert_cb = cb_rssi_alert,
 108         .raw_rssi_received_cb = cb_raw_rssi_received,
 109 #endif
 110 };
 111
 112 oal_status_t adapter_mgr_init(const bt_interface_t * stack_if)
 113 {
 114         int ret;
 115         blued_api = stack_if;
 116
 117         ret = blued_api->init(&callbacks);
 118
 119         if (ret != BT_STATUS_SUCCESS) {
 120                 BT_ERR("Adapter callback registration failed: [%s]", status2string(ret));
 121                 blued_api->cleanup();
 122                 return convert_to_oal_status(ret);
 123         }
 124
 125         return OAL_STATUS_SUCCESS;
 126 }
 127
 128 const bt_interface_t* adapter_get_stack_interface(void)
 129 {
 130         return blued_api;
 131 }
 132
 133 void adapter_mgr_cleanup(void)
 134 {
 135         /* Nothing to clean yet , do not set blued_api NULL as it will be used to clean Bluedroid states */
 136         BT_DBG();
 137 }
 138
 139 #ifdef TIZEN_BT_HAL
 140 int oal_set_adapter_request_state(int enable)
 141 {
 142         return blued_api->set_hal_adapter_request_state(enable);
 143 }
 144
 145 int oal_set_le_request_state(int enable)
 146 {
 147         return blued_api->set_hal_le_request_state(enable);
 148 }
 149 #endif
 150
 151 oal_status_t adapter_enable(void)
 152 {
 153         int ret = BT_STATUS_SUCCESS;
 154
 155         API_TRACE();
 156
 157         if (blued_api == NULL) {
 158                 BT_INFO("Stack is initializing, so pending enable");
 159                 g_timeout_add(200, retry_enable_adapter, NULL);
 160                 return OAL_STATUS_PENDING;
 161         }
 162
 163         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 164                 g_timeout_add(200, retry_enable_adapter, NULL);
 165                 return OAL_STATUS_PENDING;
 166         }
 167
 168         ret = blued_api->enable();
 169
 170         if (ret != BT_STATUS_SUCCESS) {
 171                 BT_ERR("Enable failed: [%s]", status2string(ret));
 172                 return convert_to_oal_status(ret);
 173         }
 174
 175         return OAL_STATUS_SUCCESS;
 176 }
 177
 178 oal_status_t adapter_disable(void)
 179 {
 180         int ret;
 181
 182         API_TRACE();
 183
 184         CHECK_OAL_INITIALIZED();
 185
 186         ret = blued_api->disable();
 187
 188         if (ret != BT_STATUS_SUCCESS) {
 189                 BT_ERR("Disable failed: [%s]", status2string(ret));
 190                 return convert_to_oal_status(ret);
 191         }
 192         return OAL_STATUS_SUCCESS;
 193 }
 194
 195 oal_status_t le_enable(void)
 196 {
 197         int ret = BT_STATUS_SUCCESS;
 198
 199         API_TRACE();
 200         CHECK_OAL_INITIALIZED();
 201
 202 #ifdef TIZEN_BT_HAL
 203         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 204                 g_timeout_add(200, retry_enable_le, NULL);
 205                 return OAL_STATUS_PENDING;
 206         }
 207
 208         ret = blued_api->le_enable();
 209
 210         if (ret != BT_STATUS_SUCCESS) {
 211                 BT_ERR("Enable failed: [%s]", status2string(ret));
 212                 return convert_to_oal_status(ret);
 213         }
 214 #else
 215         BT_INFO("Not Supported");
 216         ret = OAL_STATUS_NOT_SUPPORT;
 217 #endif
 218
 219         return ret;
 220 }
 221
 222 oal_status_t le_disable(void)
 223 {
 224         int ret;
 225
 226         API_TRACE();
 227
 228         CHECK_OAL_INITIALIZED();
 229
 230 #ifdef TIZEN_BT_HAL
 231         ret = blued_api->le_disable();
 232
 233         if (ret != BT_STATUS_SUCCESS) {
 234                 BT_ERR("Disable failed: [%s]", status2string(ret));
 235                 return convert_to_oal_status(ret);
 236         }
 237 #else
 238         BT_INFO("Not Supported");
 239         ret = OAL_STATUS_NOT_SUPPORT;
 240 #endif
 241         return ret;
 242 }
 243
 244 oal_status_t le_init(void)
 245 {
 246         int ret = BT_STATUS_SUCCESS;
 247         API_TRACE();
 248         CHECK_OAL_INITIALIZED();
 249 #ifdef TIZEN_BT_HAL
 250         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 251                 g_timeout_add(200, retry_enable_le, NULL);
 252                 return OAL_STATUS_PENDING;
 253         }
 254         ret = blued_api->le_init();
 255         if (ret != BT_STATUS_SUCCESS) {
 256                 BT_ERR("Enable failed: [%s]", status2string(ret));
 257                 return convert_to_oal_status(ret);
 258         }
 259 #else
 260         BT_INFO("Not Supported");
 261         ret = OAL_STATUS_NOT_SUPPORT;
 262 #endif
 263         return ret;
 264 }
 265 oal_status_t le_deinit(void)
 266 {
 267         int ret = BT_STATUS_SUCCESS;
 268         API_TRACE();
 269         CHECK_OAL_INITIALIZED();
 270 #ifdef TIZEN_BT_HAL
 271         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 272                 g_timeout_add(200, retry_enable_le, NULL);
 273                 return OAL_STATUS_PENDING;
 274         }
 275         blued_api->le_deinit();
 276 #else
 277         BT_INFO("Not Supported");
 278         ret = OAL_STATUS_NOT_SUPPORT;
 279 #endif
 280         return ret;
 281 }
 282 oal_status_t is_advertising(void)
 283 {
 284         int ret = BT_STATUS_SUCCESS;
 285         API_TRACE();
 286         CHECK_OAL_INITIALIZED();
 287 #ifdef TIZEN_BT_HAL
 288         if (OAL_STATUS_SUCCESS != hw_is_module_ready()) {
 289                 g_timeout_add(200, retry_enable_le, NULL);
 290                 return OAL_STATUS_PENDING;
 291         }
 292         int r = blued_api->is_advertising();
 293         if (r == TRUE)
 294                 ret = BT_STATUS_SUCCESS;
 295         else
 296                 ret = BT_STATUS_FAIL;
 297 #else
 298         BT_INFO("Not Supported");
 299         ret = OAL_STATUS_NOT_SUPPORT;
 300 #endif
 301         return ret;
 302 }
 303 oal_status_t adapter_start_custom_inquiry(discovery_type_t disc_type)
 304 {
 305         int ret;
 306
 307         API_TRACE();
 308
 309         CHECK_OAL_INITIALIZED();
 310         BT_INFO("Custom Discovery Type [0x%x]", disc_type);
 311
 312 #ifdef TIZEN_BT_HAL
 313         ret = blued_api->start_custom_discovery(disc_type);
 314         if (ret != BT_STATUS_SUCCESS) {
 315                 BT_ERR("start_custom_discovery failed: [%s]", status2string(ret));
 316                 return convert_to_oal_status(ret);
 317         }
 318 #else
 319         BT_INFO("Not Supported");
 320         ret = OAL_STATUS_NOT_SUPPORT;
 321 #endif
 322         return ret;
 323 }
 324
 325 oal_status_t adapter_get_powered_status(gboolean *status)
 326 {
 327         int ret;
 328         unsigned char powered = 0;
 329
 330         API_TRACE();
 331
 332         CHECK_OAL_INITIALIZED();
 333
 334         OAL_CHECK_PARAMETER(status, return);
 335         BT_INFO("Get Adapter Powered status");
 336
 337 #ifdef TIZEN_BT_HAL
 338         ret = blued_api->get_adapter_powered_status(&powered);
 339         if (ret != BT_STATUS_SUCCESS) {
 340                 BT_ERR("adapter_get_powered_status failed: [%s]", status2string(ret));
 341                 *status = FALSE;
 342                 return convert_to_oal_status(ret);
 343         }
 344         if (powered == 1)
 345                 *status = TRUE;
 346         else
 347                 *status = FALSE;
 348 #else
 349         BT_INFO("Not Supported");
 350         ret = OAL_STATUS_NOT_SUPPORT;
 351 #endif
 352         return ret;
 353 }
 354
 355 oal_status_t adapter_reset(void)
 356 {
 357         int ret;
 358
 359         API_TRACE();
 360
 361         CHECK_OAL_INITIALIZED();
 362         BT_INFO("Adapter Reset");
 363
 364 #ifdef TIZEN_BT_HAL
 365         ret = blued_api->reset();
 366         if (ret != BT_STATUS_SUCCESS) {
 367                 BT_ERR("Adapter Reset failed: [%s]", status2string(ret));
 368                 return convert_to_oal_status(ret);
 369         }
 370 #else
 371         BT_INFO("Not Supported");
 372         ret = OAL_STATUS_NOT_SUPPORT;
 373 #endif
 374         return ret;
 375 }
 376
 377 oal_status_t adapter_recover(void)
 378 {
 379         int result;
 380
 381         API_TRACE();
 382
 383         CHECK_OAL_INITIALIZED();
 384         BT_INFO("Adapter Recover");
 385
 386         result = blued_api->recover();
 387         if (result != BT_STATUS_SUCCESS) {
 388                 BT_ERR("Adapter Recover Failed: [%s]", status2string(result));
 389                 return convert_to_oal_status(result);
 390         }
 391
 392         return result;
 393 }
 394
 395 oal_status_t adapter_start_inquiry(unsigned short duration)
 396 {
 397         int ret;
 398
 399         API_TRACE();
 400
 401         CHECK_OAL_INITIALIZED();
 402
 403         ret = blued_api->start_discovery();
 404         if (ret != BT_STATUS_SUCCESS) {
 405                 BT_ERR("start_discovery failed: [%s]", status2string(ret));
 406                 return convert_to_oal_status(ret);
 407         }
 408
 409         return OAL_STATUS_SUCCESS;
 410 }
 411
 412 oal_status_t adapter_stop_inquiry(void)
 413 {
 414         int ret;
 415
 416         API_TRACE();
 417
 418         CHECK_OAL_INITIALIZED();
 419
 420         ret = blued_api->cancel_discovery();
 421         if (ret != BT_STATUS_SUCCESS) {
 422                 BT_ERR("cancel_discovery failed: [%s]", status2string(ret));
 423                 return convert_to_oal_status(ret);
 424         }
 425
 426         return OAL_STATUS_SUCCESS;
 427 }
 428
 429 /* Callbacks from Stack */
 430 static void cb_adapter_state_change(bt_state_t status)
 431 {
 432         BT_DBG("+");
 433         oal_event_t event;
 434
 435         event = (BT_STATE_ON == status) ? OAL_EVENT_ADAPTER_ENABLED : OAL_EVENT_ADAPTER_DISABLED;
 436
 437         send_event(event, NULL, 0);
 438 }
 439
 440 #ifdef TIZEN_BT_HAL
 441 /* Callbacks from Stack */
 442 static void cb_ble_state_change(bt_state_t status)
 443 {
 444         BT_DBG("+");
 445         oal_event_t event;
 446
 447         event = (BT_STATE_ON == status) ? OAL_EVENT_BLE_ENABLED : OAL_EVENT_BLE_DISABLED;
 448
 449         send_event(event, NULL, 0);
 450 }
 451 #endif
 452
 453 static gboolean retry_enable_adapter(gpointer data)
 454 {
 455         adapter_enable();
 456         return FALSE;
 457 }
 458
 459 #ifdef TIZEN_BT_HAL
 460 static gboolean retry_enable_le(gpointer data)
 461 {
 462         le_enable();
 463         return FALSE;
 464 }
 465 #endif
 466 oal_status_t adapter_get_properties(void)
 467 {
 468         int ret;
 469
 470         API_TRACE();
 471         CHECK_OAL_INITIALIZED();
 472
 473         ret = blued_api->get_adapter_properties();
 474         if (ret != BT_STATUS_SUCCESS) {
 475                 BT_ERR("get_adapter_properties failed: [%s]", status2string(ret));
 476                 return convert_to_oal_status(ret);
 477         }
 478
 479         return OAL_STATUS_SUCCESS;
 480 }
 481
 482 oal_status_t adapter_get_address(void)
 483 {
 484         int ret;
 485
 486         API_TRACE();
 487         CHECK_OAL_INITIALIZED();
 488
 489         ret = blued_api->get_adapter_property(BT_PROPERTY_BDADDR);
 490         if (ret != BT_STATUS_SUCCESS) {
 491                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 492                 return convert_to_oal_status(ret);
 493         }
 494
 495         return OAL_STATUS_SUCCESS;
 496 }
 497
 498 oal_status_t adapter_get_version(void)
 499 {
 500         int ret;
 501
 502         API_TRACE();
 503         CHECK_OAL_INITIALIZED();
 504
 505         ret = blued_api->get_adapter_property(BT_PROPERTY_VERSION);
 506         if (ret != BT_STATUS_SUCCESS) {
 507                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 508                 return convert_to_oal_status(ret);
 509         }
 510
 511         return OAL_STATUS_SUCCESS;
 512 }
 513
 514 oal_status_t adapter_get_name(void)
 515 {
 516         int ret;
 517
 518         CHECK_OAL_INITIALIZED();
 519
 520         API_TRACE();
 521
 522         ret = blued_api->get_adapter_property(BT_PROPERTY_BDNAME);
 523         if (ret != BT_STATUS_SUCCESS) {
 524                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 525                 return convert_to_oal_status(ret);
 526         }
 527
 528         return OAL_STATUS_SUCCESS;
 529 }
 530
 531 oal_status_t adapter_set_name(char * name)
 532 {
 533         int ret;
 534         bt_property_t prop;
 535
 536         CHECK_OAL_INITIALIZED();
 537
 538         OAL_CHECK_PARAMETER(name, return);
 539         API_TRACE("Name: %s", name);
 540
 541         prop.type = BT_PROPERTY_BDNAME;
 542         prop.len = strlen(name);
 543         prop.val = name;
 544
 545         ret = blued_api->set_adapter_property(&prop);
 546         if (ret != BT_STATUS_SUCCESS) {
 547                 BT_ERR("set_adapter_property: [%s]", status2string(ret));
 548                 ret = OAL_STATUS_INTERNAL_ERROR;
 549         } else
 550                 ret = OAL_STATUS_SUCCESS;
 551
 552         return ret;
 553 }
 554
 555 oal_status_t adapter_is_discoverable(int *p_discoverable)
 556 {
 557         OAL_CHECK_PARAMETER(p_discoverable, return);
 558
 559         *p_discoverable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 560
 561         API_TRACE("%d", *p_discoverable);
 562
 563         return OAL_STATUS_SUCCESS;
 564 }
 565
 566 oal_status_t adapter_is_connectable(int *p_connectable)
 567 {
 568         OAL_CHECK_PARAMETER(p_connectable, return);
 569
 570         *p_connectable = (scan_mode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE)
 571                 || (scan_mode == BT_SCAN_MODE_CONNECTABLE);
 572
 573         API_TRACE("%d", *p_connectable);
 574
 575         return OAL_STATUS_SUCCESS;
 576 }
 577
 578 oal_status_t adapter_get_discoverable_timeout(int *p_timeout)
 579 {
 580         API_TRACE("%d", discoverable_timeout);
 581
 582         *p_timeout = discoverable_timeout;
 583
 584         return OAL_STATUS_SUCCESS;
 585 }
 586
 587 oal_status_t adapter_get_service_uuids(void)
 588 {
 589         int ret;
 590
 591         CHECK_OAL_INITIALIZED();
 592
 593         API_TRACE();
 594         ret = blued_api->get_adapter_property(BT_PROPERTY_UUIDS);
 595         if (ret != BT_STATUS_SUCCESS) {
 596                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 597                 return convert_to_oal_status(ret);
 598         }
 599         return OAL_STATUS_SUCCESS;
 600 }
 601
 602 oal_status_t adapter_get_bonded_devices(void)
 603 {
 604         int ret;
 605
 606         CHECK_OAL_INITIALIZED();
 607
 608         API_TRACE();
 609
 610         ret = blued_api->get_adapter_property(BT_PROPERTY_ADAPTER_BONDED_DEVICES);
 611         if (ret != BT_STATUS_SUCCESS) {
 612                 BT_ERR("get_adapter_property failed: [%s]", status2string(ret));
 613                 return convert_to_oal_status(ret);
 614         }
 615
 616         return OAL_STATUS_SUCCESS;
 617 }
 618
 619 static oal_status_t set_scan_mode(bt_scan_mode_t mode)
 620 {
 621         bt_property_t prop;
 622         int res;
 623
 624         BT_DBG("+");
 625
 626         CHECK_OAL_INITIALIZED();
 627
 628         prop.type = BT_PROPERTY_ADAPTER_SCAN_MODE;
 629         prop.len = sizeof(bt_scan_mode_t);
 630         prop.val = &mode;
 631         res = blued_api->set_adapter_property(&prop);
 632         if (res != BT_STATUS_SUCCESS) {
 633                 BT_ERR("set scan mode failed [%s]", status2string(res));
 634                 return convert_to_oal_status(res);
 635         }
 636
 637         BT_DBG("-");
 638         return OAL_STATUS_SUCCESS;
 639 }
 640
 641 oal_status_t adapter_set_connectable(int connectable)
 642 {
 643         bt_scan_mode_t mode;
 644
 645         API_TRACE("%d", connectable);
 646
 647         CHECK_OAL_INITIALIZED();
 648
 649         mode = connectable ? BT_SCAN_MODE_CONNECTABLE : BT_SCAN_MODE_NONE;
 650
 651         return set_scan_mode(mode);
 652 }
 653
 654 oal_status_t adapter_set_discoverable(void)
 655 {
 656         CHECK_OAL_INITIALIZED();
 657         API_TRACE();
 658
 659         return set_scan_mode(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
 660 }
 661
 662 oal_status_t adapter_set_discoverable_timeout(int timeout)
 663 {
 664         bt_property_t prop;
 665         int res;
 666         uint32_t prop_val = timeout;
 667
 668         CHECK_OAL_INITIALIZED();
 669         API_TRACE("%d", timeout);
 670
 671         prop.type = BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT;
 672         prop.len = sizeof(prop_val);
 673         prop.val = &prop_val;
 674         res = blued_api->set_adapter_property(&prop);
 675         if (res != BT_STATUS_SUCCESS) {
 676                 BT_ERR("set_adapter_property failed [%s]", status2string(res));
 677                 return convert_to_oal_status(res);
 678         }
 679         return OAL_STATUS_SUCCESS;
 680 }
 681
 682 oal_status_t adapter_ble_multi_adv_update(int Ins_id, int min_intv, int max_intv,
 683                         int adv_type, int chnl_map, int tx_power, int timeout_s)
 684 {
 685         int res;
 686         CHECK_OAL_INITIALIZED();
 687         API_TRACE();
 688
 689         res = gatts_multi_adv_update(Ins_id, min_intv, max_intv,
 690                         adv_type, chnl_map, tx_power, timeout_s);
 691         if (res != OAL_STATUS_SUCCESS) {
 692                 BT_ERR("gatts_multi_adv_update: [%d]", res);
 693                 return res;
 694         }
 695         return OAL_STATUS_SUCCESS;
 696 }
 697
 698 oal_status_t adapter_ble_multi_adv_set_inst_data(int instance_id,
 699                         oal_ble_multi_adv_param_setup_t * adv_param_setup)
 700 {
 701         int res;
 702         CHECK_OAL_INITIALIZED();
 703         OAL_CHECK_PARAMETER(adv_param_setup, return);
 704
 705         API_TRACE();
 706
 707         res = gatts_multi_adv_set_inst_data(instance_id, adv_param_setup);
 708         if (res != OAL_STATUS_SUCCESS) {
 709                 BT_ERR("failed: [%d]", res);
 710                 return res;
 711         }
 712         return OAL_STATUS_SUCCESS;
 713 }
 714
 715 oal_status_t adapter_ble_multi_adv_enable(int instance_id)
 716 {
 717         int res;
 718         CHECK_OAL_INITIALIZED();
 719         API_TRACE();
 720
 721         res = gatts_multi_adv_enable(instance_id);
 722         if (res != OAL_STATUS_SUCCESS) {
 723                 BT_ERR("failed: [%d]", res);
 724                 return res;
 725         }
 726
 727         return OAL_STATUS_SUCCESS;
 728 }
 729
 730 oal_status_t adapter_ble_multi_adv_disable(int instance_id)
 731 {
 732         int res;
 733         CHECK_OAL_INITIALIZED();
 734         API_TRACE();
 735
 736         res = gatts_multi_adv_disable(instance_id);
 737         if (res != OAL_STATUS_SUCCESS) {
 738                 BT_ERR("failed: [%d]", res);
 739                 return res;
 740         }
 741
 742         return OAL_STATUS_SUCCESS;
 743 }
 744
 745 oal_status_t adapter_set_le_static_random_address(int enable)
 746 {
 747         int ret;
 748
 749         CHECK_OAL_INITIALIZED();
 750         API_TRACE("%d", enable);
 751
 752 #ifdef TIZEN_BT_HAL
 753         ret = blued_api->set_le_static_random_address((enable ? 1 : 0));
 754         if (ret != BT_STATUS_SUCCESS)
 755                 BT_ERR("Static address set failed: [%s]", status2string(ret));
 756         ret = convert_to_oal_status(ret);
 757 #else
 758         BT_INFO("Not Supported");
 759         ret = OAL_STATUS_NOT_SUPPORT;
 760 #endif
 761
 762         return ret;
 763 }
 764
 765 oal_status_t adapter_set_manufacturer_data(oal_manufacturer_data_t *m_data)
 766 {
 767         int ret;
 768
 769         CHECK_OAL_INITIALIZED();
 770         API_TRACE();
 771
 772         OAL_CHECK_PARAMETER(m_data, return);
 773         ret = blued_api->adapter_le_set_manufacturer_data((bt_manufacturer_data_t*)m_data);
 774         if (ret != BT_STATUS_SUCCESS)
 775                 BT_ERR("Setting manufacturer data Failed: [%s]",status2string(ret));
 776
 777         ret = convert_to_oal_status(ret);
 778         return ret;
 779 }
 780
 781 oal_status_t adapter_set_white_list(bt_address_t *device_address, int address_type, bool is_add)
 782 {
 783         int ret;
 784         bdstr_t bdstr;
 785
 786         CHECK_OAL_INITIALIZED();
 787         API_TRACE();
 788
 789         BT_INFO("BT remote device Address: %s", bdt_bd2str(device_address, &bdstr));
 790
 791         ret = blued_api->adapter_le_set_white_list((bt_bdaddr_t*)device_address, address_type, is_add);
 792         if (ret != BT_STATUS_SUCCESS) {
 793                 if(is_add)
 794                         BT_ERR("Add to White List Failed: [%s]",status2string(ret));
 795                 else
 796                         BT_ERR("Remove from White List Failed: [%s]",status2string(ret));
 797         }
 798         ret = convert_to_oal_status(ret);
 799         return ret;
 800 }
 801
 802 oal_status_t adapter_ble_set_privacy(int set_privacy)
 803 {
 804         int res;
 805
 806         CHECK_OAL_INITIALIZED();
 807         API_TRACE();
 808
 809         res = blued_api->adapter_le_set_privacy(set_privacy);
 810         if (res != BT_STATUS_SUCCESS)
 811                 BT_ERR("Setting LE Privacy Failed: [%s]", status2string(res));
 812         res = convert_to_oal_status(res);
 813
 814         return res;
 815 }
 816
 817 static void cb_adapter_properties(bt_status_t status,
 818                 int num_properties,
 819                 bt_property_t *properties)
 820 {
 821         int i;
 822
 823         BT_DBG("status: %d, count: %d", status, num_properties);
 824
 825         print_bt_properties(num_properties, properties);
 826
 827         if (status != BT_STATUS_SUCCESS) {
 828                 if (num_properties == 1) {
 829                         BT_ERR("Adapter Prop failed: status: [%s], count: %d, prop: %d",
 830                                 status2string(status), num_properties, properties[num_properties-1].type);
 831                 } else {
 832                         BT_ERR("Adapter Prop failed: status: [%s], count: %d", status2string(status), num_properties);
 833                 }
 834                 return;
 835         }
 836
 837         for (i = 0; i < num_properties; i++) {
 838                 BT_DBG("prop type %d, len %d", properties[i].type, properties[i].len);
 839                 switch (properties[i].type) {
 840                 case BT_PROPERTY_VERSION: {
 841                         g_strlcpy(local_version, properties[i].val, BT_VERSION_STR_LEN_MAX);
 842                         local_version[properties[i].len] = '\0';
 843
 844                         BT_DBG("Version: %s", local_version);
 845                         /* Send event to application */
 846                         if (num_properties == 1) {
 847                                 char *adapter_ver = g_strdup(local_version);
 848
 849                                 /* Application has requested this property SET/GET hence send EVENT */
 850                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_VERSION, adapter_ver, strlen(adapter_ver));
 851                         }
 852                         break;
 853                 }
 854                 case BT_PROPERTY_BDNAME: {
 855                         g_strlcpy(local_name, properties[i].val, BT_DEVICE_NAME_LENGTH_MAX);
 856                         local_name[properties[i].len] = '\0';
 857
 858                         BT_DBG("Name: %s", local_name);
 859                         /* Send event to application */
 860                         if (num_properties == 1) {
 861                                 char * adap_name = g_strdup(local_name);
 862
 863                                 /* Application has requested this property SET/GET hence send EVENT */
 864                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_NAME, adap_name, strlen(adap_name)+1);
 865                         }
 866                         break;
 867                 }
 868                 case BT_PROPERTY_BDADDR: {
 869                         bt_bdaddr_t * addr;
 870
 871                         addr =  properties[i].val;
 872                         memcpy(local_address.addr, addr->address, 6);
 873                         if (num_properties == 1) {
 874                                 /* Application has requested this property SET/GET hence send EVENT */
 875                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_ADDRESS,
 876                                                 g_memdup(&local_address, sizeof(local_address)),
 877                                                 sizeof(local_address));
 878                         }
 879                         break;
 880                 }
 881                 case BT_PROPERTY_UUIDS: {
 882                         int num_uuid;
 883
 884                         num_uuid = properties[i].len/sizeof(bt_uuid_t);
 885
 886                         BT_DBG("num_uuid: %d", num_uuid);
 887
 888                         /* Send event to application */
 889                         if (num_properties == 1) {
 890                                 event_adapter_services_t *uuids_event;
 891
 892                                 uuids_event = g_malloc(sizeof(event_adapter_services_t) + properties[i].len);
 893                                 memcpy(uuids_event->service_list, properties[i].val, properties[i].len);
 894                                 uuids_event->num = num_uuid;
 895
 896                                 /* Application has requested this property SET/GET hence send EVENT */
 897                                 send_event(OAL_EVENT_ADAPTER_PROPERTY_SERVICES,
 898                                                 uuids_event, (sizeof(event_adapter_services_t) + num_uuid * sizeof(bt_uuid_t)));
 899                         }
 900                         break;
 901                 }
 902                 case BT_PROPERTY_ADAPTER_SCAN_MODE: {
 903                         bt_scan_mode_t cur_mode = *((bt_scan_mode_t *)properties[i].val);
 904
 905                         BT_INFO("Scan mode (%d)", cur_mode);
 906
 907                         scan_mode = cur_mode;
 908
 909                         /* Send event to application */
 910                         if (num_properties == 1) {
 911                                 oal_event_t event = OAL_EVENT_ADAPTER_MODE_NON_CONNECTABLE;
 912
 913                                 if (BT_SCAN_MODE_CONNECTABLE == cur_mode)
 914                                         event = OAL_EVENT_ADAPTER_MODE_CONNECTABLE;
 915                                 else if (BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE == cur_mode)
 916                                         event = OAL_EVENT_ADAPTER_MODE_DISCOVERABLE;
 917
 918                                 /* Application has requested this property SET/GET hence send EVENT */
 919                                 send_event(event, NULL, 0);
 920                         }
 921                         break;
 922                 }
 923                 case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: {
 924                         int timeout;
 925
 926                         timeout = *((uint32_t*)properties[i].val);
 927
 928                         BT_INFO("Discoverability timeout: %d", timeout);
 929                         discoverable_timeout = timeout;
 930
 931                         send_event(OAL_EVENT_ADAPTER_MODE_DISCOVERABLE_TIMEOUT,
 932                                         g_memdup(properties[i].val, sizeof(uint32_t)),
 933                                         sizeof(uint32_t));
 934                         break;
 935                 }
 936                 case BT_PROPERTY_ADAPTER_BONDED_DEVICES: {
 937                         int j;
 938                         int num_bonded;
 939                         bt_bdaddr_t *bonded_addr_list;
 940                         event_device_list_t *event_data;
 941
 942                         num_bonded = properties[i].len/sizeof(bt_bdaddr_t);
 943                         BT_DBG("num_bonded %d", num_bonded);
 944
 945                         if (num_properties > 1) /* No explicit req for this prop, ignore */
 946                                 break;
 947
 948                         bonded_addr_list = properties[i].val;
 949                         event_data = g_malloc(sizeof(event_device_list_t) + num_bonded*sizeof(bt_address_t));
 950                         event_data->num = num_bonded;
 951
 952                         for (j = 0; j < num_bonded; j++)
 953                                 memcpy(event_data->devices[j].addr, bonded_addr_list[j].address, 6);
 954
 955                         send_event(OAL_EVENT_ADAPTER_BONDED_DEVICE_LIST,
 956                                         event_data, (sizeof(event_device_list_t) + num_bonded * sizeof(bt_bdaddr_t)));
 957                         break;
 958                 }
 959                 case BT_PROPERTY_A2DP_ROLE: {
 960                         unsigned int a2dp_role;
 961
 962                         a2dp_role = *((uint32_t*)properties[i].val);
 963
 964                         BT_INFO("A2DP role: %u", a2dp_role);
 965
 966                         send_event(OAL_EVENT_ADAPTER_PROPERTY_A2DP_ROLE,
 967                                         g_memdup(properties[i].val, sizeof(uint32_t)),
 968                                         sizeof(uint32_t));
 969                         break;
 970                 }
 971                 case BT_PROPERTY_LOCAL_LE_FEATURES: {
 972                         event_adapter_le_features_t *le_features;
 973
 974                         le_features = g_malloc(sizeof(event_adapter_le_features_t));
 975
 976                         le_features->max_adv_instance = ((bt_local_le_features_t *)(properties[i].val))->max_adv_instance;
 977                         le_features->rpa_offloading = ((bt_local_le_features_t *)(properties[i].val))->rpa_offload_supported;
 978                         le_features->max_adv_filter = ((bt_local_le_features_t *)(properties[i].val))->max_adv_filter_supported;
 979                         le_features->le_2m_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
 980                         le_features->le_coded_phy_support = ((bt_local_le_features_t *)(properties[i].val))->le_2m_phy_supported;
 981
 982                         BT_INFO("LE 2M PHY Support (%d)", le_features->le_2m_phy_support);
 983                         BT_INFO("LE CODED PHY Support (%d)", le_features->le_coded_phy_support);
 984
 985                         send_event(OAL_EVENT_BLE_LOCAL_FEATURES,
 986                                         le_features,
 987                                         sizeof(event_adapter_le_features_t));
 988                         break;
 989                 }
 990                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STARTED: {
 991                         BT_INFO("LE Discovery started");
 992                         send_event(OAL_EVENT_BLE_DISCOVERY_STARTED, NULL, 0);
 993                         break;
 994                 }
 995                 case BT_PROPERTY_ADAPTER_LE_DISCOVERY_STOPPED: {
 996                         BT_INFO("LE Discovery stopped");
 997                         send_event(OAL_EVENT_BLE_DISCOVERY_STOPPED, NULL, 0);
 998                         break;
 999                 }
1000                 default:
1001                          BT_WARN("Unhandled property: %d", properties[i].type);
1002                          break;
1003                 }
1004         }
1005 }
1006
1007 static void cb_adapter_discovery_state_changed(bt_discovery_state_t state)
1008 {
1009         oal_event_t event;
1010
1011         event = (BT_DISCOVERY_STARTED == state) ? OAL_EVENT_ADAPTER_INQUIRY_STARTED : OAL_EVENT_ADAPTER_INQUIRY_FINISHED;
1012
1013         BT_DBG("%d", state);
1014         send_event(event, NULL, 0);
1015 }
1016
1017 static void cb_adapter_device_found(int num_properties, bt_property_t *properties)
1018 {
1019         remote_device_t dev_info;
1020         ble_adv_data_t adv_info;
1021         oal_event_t event;
1022         gpointer event_data;
1023         gsize size = 0;
1024         BT_DBG("+");
1025
1026         if (num_properties == 0) {
1027                 BT_ERR("Unexpected, properties count is zero!!");
1028                 return;
1029         }
1030
1031         memset(&dev_info, 0x00, sizeof(remote_device_t));
1032         memset(&adv_info, 0x00, sizeof(ble_adv_data_t));
1033
1034         print_bt_properties(num_properties, properties);
1035         parse_device_properties(num_properties, properties, &dev_info, &adv_info);
1036
1037         BT_INFO("number of properties= [%d] ", num_properties);
1038
1039         if (dev_info.type != DEV_TYPE_BREDR) {
1040                 /* BLE Single or DUAL mode found, so it should have Adv data */
1041                 event_ble_dev_found_t * ble_dev_event = g_new0(event_ble_dev_found_t, 1);
1042
1043                 ble_dev_event->adv_len = adv_info.len;
1044
1045                 if (adv_info.len > 0 && adv_info.adv_data) {
1046                         memcpy(ble_dev_event->adv_data, adv_info.adv_data, adv_info.len);
1047                         ble_dev_event->adv_len = adv_info.len;
1048                 } else
1049                         ble_dev_event->adv_len = 0;
1050
1051                 ble_dev_event->device_info = dev_info;
1052
1053                 event_data = ble_dev_event;
1054                 size = sizeof(event_ble_dev_found_t);
1055                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BLE;
1056         } else {
1057                 /* BREDR device, so No Adv data */
1058                 event_dev_found_t * dev_event = g_new0(event_dev_found_t, 1);
1059
1060                 memcpy(dev_event, &dev_info, sizeof(remote_device_t));
1061                 event_data = dev_event;
1062                 size = sizeof(remote_device_t);
1063                 event = OAL_EVENT_ADAPTER_INQUIRY_RESULT_BREDR_ONLY;
1064         }
1065
1066         send_event(event, event_data, size);
1067
1068         BT_DBG("-");
1069 }