Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig
[platform/kernel/u-boot.git] / boot / image-fdt.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (c) 2013, Google Inc.
4  *
5  * (C) Copyright 2008 Semihalf
6  *
7  * (C) Copyright 2000-2006
8  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9  */
10
11 #include <common.h>
12 #include <fdt_support.h>
13 #include <fdtdec.h>
14 #include <env.h>
15 #include <errno.h>
16 #include <image.h>
17 #include <lmb.h>
18 #include <log.h>
19 #include <malloc.h>
20 #include <asm/global_data.h>
21 #include <linux/libfdt.h>
22 #include <mapmem.h>
23 #include <asm/io.h>
24 #include <tee/optee.h>
25
26 #ifndef CONFIG_SYS_FDT_PAD
27 #define CONFIG_SYS_FDT_PAD 0x3000
28 #endif
29
30 /* adding a ramdisk needs 0x44 bytes in version 2008.10 */
31 #define FDT_RAMDISK_OVERHEAD    0x80
32
33 DECLARE_GLOBAL_DATA_PTR;
34
35 static void fdt_error(const char *msg)
36 {
37         puts("ERROR: ");
38         puts(msg);
39         puts(" - must RESET the board to recover.\n");
40 }
41
42 #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
43 static const image_header_t *image_get_fdt(ulong fdt_addr)
44 {
45         const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0);
46
47         image_print_contents(fdt_hdr);
48
49         puts("   Verifying Checksum ... ");
50         if (!image_check_hcrc(fdt_hdr)) {
51                 fdt_error("fdt header checksum invalid");
52                 return NULL;
53         }
54
55         if (!image_check_dcrc(fdt_hdr)) {
56                 fdt_error("fdt checksum invalid");
57                 return NULL;
58         }
59         puts("OK\n");
60
61         if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) {
62                 fdt_error("uImage is not a fdt");
63                 return NULL;
64         }
65         if (image_get_comp(fdt_hdr) != IH_COMP_NONE) {
66                 fdt_error("uImage is compressed");
67                 return NULL;
68         }
69         if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) {
70                 fdt_error("uImage data is not a fdt");
71                 return NULL;
72         }
73         return fdt_hdr;
74 }
75 #endif
76
77 static void boot_fdt_reserve_region(struct lmb *lmb, uint64_t addr,
78                                     uint64_t size, enum lmb_flags flags)
79 {
80         long ret;
81
82         ret = lmb_reserve_flags(lmb, addr, size, flags);
83         if (ret >= 0) {
84                 debug("   reserving fdt memory region: addr=%llx size=%llx flags=%x\n",
85                       (unsigned long long)addr,
86                       (unsigned long long)size, flags);
87         } else {
88                 puts("ERROR: reserving fdt memory region failed ");
89                 printf("(addr=%llx size=%llx flags=%x)\n",
90                        (unsigned long long)addr,
91                        (unsigned long long)size, flags);
92         }
93 }
94
95 /**
96  * boot_fdt_add_mem_rsv_regions - Mark the memreserve and reserved-memory
97  * sections as unusable
98  * @lmb: pointer to lmb handle, will be used for memory mgmt
99  * @fdt_blob: pointer to fdt blob base address
100  *
101  * Adds the and reserved-memorymemreserve regions in the dtb to the lmb block.
102  * Adding the memreserve regions prevents u-boot from using them to store the
103  * initrd or the fdt blob.
104  */
105 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob)
106 {
107         uint64_t addr, size;
108         int i, total, ret;
109         int nodeoffset, subnode;
110         struct fdt_resource res;
111         enum lmb_flags flags;
112
113         if (fdt_check_header(fdt_blob) != 0)
114                 return;
115
116         /* process memreserve sections */
117         total = fdt_num_mem_rsv(fdt_blob);
118         for (i = 0; i < total; i++) {
119                 if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
120                         continue;
121                 boot_fdt_reserve_region(lmb, addr, size, LMB_NONE);
122         }
123
124         /* process reserved-memory */
125         nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory");
126         if (nodeoffset >= 0) {
127                 subnode = fdt_first_subnode(fdt_blob, nodeoffset);
128                 while (subnode >= 0) {
129                         /* check if this subnode has a reg property */
130                         ret = fdt_get_resource(fdt_blob, subnode, "reg", 0,
131                                                &res);
132                         if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) {
133                                 flags = LMB_NONE;
134                                 if (fdtdec_get_bool(fdt_blob, subnode,
135                                                     "no-map"))
136                                         flags = LMB_NOMAP;
137                                 addr = res.start;
138                                 size = res.end - res.start + 1;
139                                 boot_fdt_reserve_region(lmb, addr, size, flags);
140                         }
141
142                         subnode = fdt_next_subnode(fdt_blob, subnode);
143                 }
144         }
145 }
146
147 /**
148  * boot_relocate_fdt - relocate flat device tree
149  * @lmb: pointer to lmb handle, will be used for memory mgmt
150  * @of_flat_tree: pointer to a char* variable, will hold fdt start address
151  * @of_size: pointer to a ulong variable, will hold fdt length
152  *
153  * boot_relocate_fdt() allocates a region of memory within the bootmap and
154  * relocates the of_flat_tree into that region, even if the fdt is already in
155  * the bootmap.  It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
156  * bytes.
157  *
158  * of_flat_tree and of_size are set to final (after relocation) values
159  *
160  * returns:
161  *      0 - success
162  *      1 - failure
163  */
164 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
165 {
166         void    *fdt_blob = *of_flat_tree;
167         void    *of_start = NULL;
168         u64     start, size, usable;
169         char    *fdt_high;
170         ulong   mapsize, low;
171         ulong   of_len = 0;
172         int     bank;
173         int     err;
174         int     disable_relocation = 0;
175
176         /* nothing to do */
177         if (*of_size == 0)
178                 return 0;
179
180         if (fdt_check_header(fdt_blob) != 0) {
181                 fdt_error("image is not a fdt");
182                 goto error;
183         }
184
185         /* position on a 4K boundary before the alloc_current */
186         /* Pad the FDT by a specified amount */
187         of_len = *of_size + CONFIG_SYS_FDT_PAD;
188
189         /* If fdt_high is set use it to select the relocation address */
190         fdt_high = env_get("fdt_high");
191         if (fdt_high) {
192                 void *desired_addr = (void *)hextoul(fdt_high, NULL);
193
194                 if (((ulong) desired_addr) == ~0UL) {
195                         /* All ones means use fdt in place */
196                         of_start = fdt_blob;
197                         lmb_reserve(lmb, (ulong)of_start, of_len);
198                         disable_relocation = 1;
199                 } else if (desired_addr) {
200                         of_start =
201                             (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
202                                                            (ulong)desired_addr);
203                         if (of_start == NULL) {
204                                 puts("Failed using fdt_high value for Device Tree");
205                                 goto error;
206                         }
207                 } else {
208                         of_start =
209                             (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
210                 }
211         } else {
212                 mapsize = env_get_bootm_mapsize();
213                 low = env_get_bootm_low();
214                 of_start = NULL;
215
216                 for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
217                         start = gd->bd->bi_dram[bank].start;
218                         size = gd->bd->bi_dram[bank].size;
219
220                         /* DRAM bank addresses are too low, skip it. */
221                         if (start + size < low)
222                                 continue;
223
224                         usable = min(size, (u64)mapsize);
225
226                         /*
227                          * At least part of this DRAM bank is usable, try
228                          * using it for LMB allocation.
229                          */
230                         of_start =
231                             (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
232                                                            start + usable);
233                         /* Allocation succeeded, use this block. */
234                         if (of_start != NULL)
235                                 break;
236
237                         /*
238                          * Reduce the mapping size in the next bank
239                          * by the size of attempt in current bank.
240                          */
241                         mapsize -= usable - max(start, (u64)low);
242                         if (!mapsize)
243                                 break;
244                 }
245         }
246
247         if (of_start == NULL) {
248                 puts("device tree - allocation error\n");
249                 goto error;
250         }
251
252         if (disable_relocation) {
253                 /*
254                  * We assume there is space after the existing fdt to use
255                  * for padding
256                  */
257                 fdt_set_totalsize(of_start, of_len);
258                 printf("   Using Device Tree in place at %p, end %p\n",
259                        of_start, of_start + of_len - 1);
260         } else {
261                 debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
262                       fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);
263
264                 printf("   Loading Device Tree to %p, end %p ... ",
265                        of_start, of_start + of_len - 1);
266
267                 err = fdt_open_into(fdt_blob, of_start, of_len);
268                 if (err != 0) {
269                         fdt_error("fdt move failed");
270                         goto error;
271                 }
272                 puts("OK\n");
273         }
274
275         *of_flat_tree = of_start;
276         *of_size = of_len;
277
278         if (CONFIG_IS_ENABLED(CMD_FDT))
279                 set_working_fdt_addr(map_to_sysmem(*of_flat_tree));
280         return 0;
281
282 error:
283         return 1;
284 }
285
286 /**
287  * select_fdt() - Select and locate the FDT to use
288  *
289  * @images: pointer to the bootm images structure
290  * @select: name of FDT to select, or NULL for any
291  * @arch: expected FDT architecture
292  * @fdt_addrp: pointer to a ulong variable, will hold FDT pointer
293  * Return: 0 if OK, -ENOPKG if no FDT (but an error should not be reported),
294  *      other -ve value on other error
295  */
296
297 static int select_fdt(bootm_headers_t *images, const char *select, u8 arch,
298                       ulong *fdt_addrp)
299 {
300         const char *buf;
301         ulong fdt_addr;
302
303 #if CONFIG_IS_ENABLED(FIT)
304         const char *fit_uname_config = images->fit_uname_cfg;
305         const char *fit_uname_fdt = NULL;
306         ulong default_addr;
307         int fdt_noffset;
308
309         if (select) {
310                         /*
311                          * If the FDT blob comes from the FIT image and the
312                          * FIT image address is omitted in the command line
313                          * argument, try to use ramdisk or os FIT image
314                          * address or default load address.
315                          */
316                         if (images->fit_uname_rd)
317                                 default_addr = (ulong)images->fit_hdr_rd;
318                         else if (images->fit_uname_os)
319                                 default_addr = (ulong)images->fit_hdr_os;
320                         else
321                                 default_addr = image_load_addr;
322
323                         if (fit_parse_conf(select, default_addr, &fdt_addr,
324                                            &fit_uname_config)) {
325                                 debug("*  fdt: config '%s' from image at 0x%08lx\n",
326                                       fit_uname_config, fdt_addr);
327                         } else if (fit_parse_subimage(select, default_addr, &fdt_addr,
328                                    &fit_uname_fdt)) {
329                                 debug("*  fdt: subimage '%s' from image at 0x%08lx\n",
330                                       fit_uname_fdt, fdt_addr);
331                         } else
332 #endif
333                 {
334                         fdt_addr = hextoul(select, NULL);
335                         debug("*  fdt: cmdline image address = 0x%08lx\n",
336                               fdt_addr);
337                 }
338 #if CONFIG_IS_ENABLED(FIT)
339         } else {
340                 /* use FIT configuration provided in first bootm
341                  * command argument
342                  */
343                 fdt_addr = map_to_sysmem(images->fit_hdr_os);
344                 fdt_noffset = fit_get_node_from_config(images, FIT_FDT_PROP,
345                                                        fdt_addr);
346                 if (fdt_noffset == -ENOENT)
347                         return -ENOPKG;
348                 else if (fdt_noffset < 0)
349                         return fdt_noffset;
350         }
351 #endif
352         debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
353               fdt_addr);
354
355         /*
356          * Check if there is an FDT image at the
357          * address provided in the second bootm argument
358          * check image type, for FIT images get a FIT node.
359          */
360         buf = map_sysmem(fdt_addr, 0);
361         switch (genimg_get_format(buf)) {
362 #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
363         case IMAGE_FORMAT_LEGACY: {
364                         const image_header_t *fdt_hdr;
365                         ulong load, load_end;
366                         ulong image_start, image_data, image_end;
367
368                         /* verify fdt_addr points to a valid image header */
369                         printf("## Flattened Device Tree from Legacy Image at %08lx\n",
370                                fdt_addr);
371                         fdt_hdr = image_get_fdt(fdt_addr);
372                         if (!fdt_hdr)
373                                 return -ENOPKG;
374
375                         /*
376                          * move image data to the load address,
377                          * make sure we don't overwrite initial image
378                          */
379                         image_start = (ulong)fdt_hdr;
380                         image_data = (ulong)image_get_data(fdt_hdr);
381                         image_end = image_get_image_end(fdt_hdr);
382
383                         load = image_get_load(fdt_hdr);
384                         load_end = load + image_get_data_size(fdt_hdr);
385
386                         if (load == image_start ||
387                             load == image_data) {
388                                 fdt_addr = load;
389                                 break;
390                         }
391
392                         if ((load < image_end) && (load_end > image_start)) {
393                                 fdt_error("fdt overwritten");
394                                 return -EFAULT;
395                         }
396
397                         debug("   Loading FDT from 0x%08lx to 0x%08lx\n",
398                               image_data, load);
399
400                         memmove((void *)load,
401                                 (void *)image_data,
402                                 image_get_data_size(fdt_hdr));
403
404                         fdt_addr = load;
405                         break;
406                 }
407 #endif
408         case IMAGE_FORMAT_FIT:
409                 /*
410                  * This case will catch both: new uImage format
411                  * (libfdt based) and raw FDT blob (also libfdt
412                  * based).
413                  */
414 #if CONFIG_IS_ENABLED(FIT)
415                         /* check FDT blob vs FIT blob */
416                         if (!fit_check_format(buf, IMAGE_SIZE_INVAL)) {
417                                 ulong load, len;
418
419                                 fdt_noffset = boot_get_fdt_fit(images, fdt_addr,
420                                                                &fit_uname_fdt,
421                                                                &fit_uname_config,
422                                                                arch, &load, &len);
423
424                                 if (fdt_noffset < 0)
425                                         return -ENOENT;
426
427                                 images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
428                                 images->fit_uname_fdt = fit_uname_fdt;
429                                 images->fit_noffset_fdt = fdt_noffset;
430                                 fdt_addr = load;
431
432                                 break;
433                 } else
434 #endif
435                 {
436                         /*
437                          * FDT blob
438                          */
439                         debug("*  fdt: raw FDT blob\n");
440                         printf("## Flattened Device Tree blob at %08lx\n",
441                                (long)fdt_addr);
442                 }
443                 break;
444         default:
445                 puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
446                 return -ENOENT;
447         }
448         *fdt_addrp = fdt_addr;
449
450         return 0;
451 }
452
453 /**
454  * boot_get_fdt - main fdt handling routine
455  * @argc: command argument count
456  * @argv: command argument list
457  * @arch: architecture (IH_ARCH_...)
458  * @images: pointer to the bootm images structure
459  * @of_flat_tree: pointer to a char* variable, will hold fdt start address
460  * @of_size: pointer to a ulong variable, will hold fdt length
461  *
462  * boot_get_fdt() is responsible for finding a valid flat device tree image.
463  * Currently supported are the following ramdisk sources:
464  *      - multicomponent kernel/ramdisk image,
465  *      - commandline provided address of decicated ramdisk image.
466  *
467  * returns:
468  *     0, if fdt image was found and valid, or skipped
469  *     of_flat_tree and of_size are set to fdt start address and length if
470  *     fdt image is found and valid
471  *
472  *     1, if fdt image is found but corrupted
473  *     of_flat_tree and of_size are set to 0 if no fdt exists
474  */
475 int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
476                  bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
477 {
478         ulong           img_addr;
479         ulong           fdt_addr;
480         char            *fdt_blob = NULL;
481         void            *buf;
482         const char *select = NULL;
483
484         *of_flat_tree = NULL;
485         *of_size = 0;
486
487         img_addr = (argc == 0) ? image_load_addr : hextoul(argv[0], NULL);
488         buf = map_sysmem(img_addr, 0);
489
490         if (argc > 2)
491                 select = argv[2];
492         if (select || genimg_has_config(images)) {
493                 int ret;
494
495                 ret = select_fdt(images, select, arch, &fdt_addr);
496                 if (ret == -ENOPKG)
497                         goto no_fdt;
498                 else if (ret)
499                         return 1;
500                 printf("   Booting using the fdt blob at %#08lx\n", fdt_addr);
501                 fdt_blob = map_sysmem(fdt_addr, 0);
502         } else if (images->legacy_hdr_valid &&
503                         image_check_type(&images->legacy_hdr_os_copy,
504                                          IH_TYPE_MULTI)) {
505                 ulong fdt_data, fdt_len;
506
507                 /*
508                  * Now check if we have a legacy multi-component image,
509                  * get second entry data start address and len.
510                  */
511                 printf("## Flattened Device Tree from multi component Image at %08lX\n",
512                        (ulong)images->legacy_hdr_os);
513
514                 image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
515                                    &fdt_len);
516                 if (fdt_len) {
517                         fdt_blob = (char *)fdt_data;
518                         printf("   Booting using the fdt at 0x%p\n", fdt_blob);
519
520                         if (fdt_check_header(fdt_blob) != 0) {
521                                 fdt_error("image is not a fdt");
522                                 goto error;
523                         }
524
525                         if (fdt_totalsize(fdt_blob) != fdt_len) {
526                                 fdt_error("fdt size != image size");
527                                 goto error;
528                         }
529                 } else {
530                         debug("## No Flattened Device Tree\n");
531                         goto no_fdt;
532                 }
533 #ifdef CONFIG_ANDROID_BOOT_IMAGE
534         } else if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) {
535                 struct andr_img_hdr *hdr = buf;
536                 ulong           fdt_data, fdt_len;
537                 u32                     fdt_size, dtb_idx;
538                 /*
539                  * Firstly check if this android boot image has dtb field.
540                  */
541                 dtb_idx = (u32)env_get_ulong("adtb_idx", 10, 0);
542                 if (android_image_get_dtb_by_index((ulong)hdr, dtb_idx, &fdt_addr, &fdt_size)) {
543                         fdt_blob = (char *)map_sysmem(fdt_addr, 0);
544                         if (fdt_check_header(fdt_blob))
545                                 goto no_fdt;
546
547                         debug("## Using FDT in Android image dtb area with idx %u\n", dtb_idx);
548                 } else if (!android_image_get_second(hdr, &fdt_data, &fdt_len) &&
549                         !fdt_check_header((char *)fdt_data)) {
550                         fdt_blob = (char *)fdt_data;
551                         if (fdt_totalsize(fdt_blob) != fdt_len)
552                                 goto error;
553
554                         debug("## Using FDT in Android image second area\n");
555                 } else {
556                         fdt_addr = env_get_hex("fdtaddr", 0);
557                         if (!fdt_addr)
558                                 goto no_fdt;
559
560                         fdt_blob = map_sysmem(fdt_addr, 0);
561                         if (fdt_check_header(fdt_blob))
562                                 goto no_fdt;
563
564                         debug("## Using FDT at ${fdtaddr}=Ox%lx\n", fdt_addr);
565                 }
566 #endif
567         } else {
568                 debug("## No Flattened Device Tree\n");
569                 goto no_fdt;
570         }
571
572         *of_flat_tree = fdt_blob;
573         *of_size = fdt_totalsize(fdt_blob);
574         debug("   of_flat_tree at 0x%08lx size 0x%08lx\n",
575               (ulong)*of_flat_tree, *of_size);
576
577         return 0;
578
579 no_fdt:
580         debug("Continuing to boot without FDT\n");
581         return 0;
582 error:
583         return 1;
584 }
585
586 /*
587  * Verify the device tree.
588  *
589  * This function is called after all device tree fix-ups have been enacted,
590  * so that the final device tree can be verified.  The definition of "verified"
591  * is up to the specific implementation.  However, it generally means that the
592  * addresses of some of the devices in the device tree are compared with the
593  * actual addresses at which U-Boot has placed them.
594  *
595  * Returns 1 on success, 0 on failure.  If 0 is returned, U-Boot will halt the
596  * boot process.
597  */
598 __weak int ft_verify_fdt(void *fdt)
599 {
600         return 1;
601 }
602
603 __weak int arch_fixup_fdt(void *blob)
604 {
605         return 0;
606 }
607
608 int image_setup_libfdt(bootm_headers_t *images, void *blob,
609                        int of_size, struct lmb *lmb)
610 {
611         ulong *initrd_start = &images->initrd_start;
612         ulong *initrd_end = &images->initrd_end;
613         int ret = -EPERM;
614         int fdt_ret;
615
616         if (fdt_root(blob) < 0) {
617                 printf("ERROR: root node setup failed\n");
618                 goto err;
619         }
620         if (fdt_chosen(blob) < 0) {
621                 printf("ERROR: /chosen node create failed\n");
622                 goto err;
623         }
624         if (arch_fixup_fdt(blob) < 0) {
625                 printf("ERROR: arch-specific fdt fixup failed\n");
626                 goto err;
627         }
628
629         fdt_ret = optee_copy_fdt_nodes(blob);
630         if (fdt_ret) {
631                 printf("ERROR: transfer of optee nodes to new fdt failed: %s\n",
632                        fdt_strerror(fdt_ret));
633                 goto err;
634         }
635
636         /* Store name of configuration node as u-boot,bootconf in /chosen node */
637         if (images->fit_uname_cfg)
638                 fdt_find_and_setprop(blob, "/chosen", "u-boot,bootconf",
639                                         images->fit_uname_cfg,
640                                         strlen(images->fit_uname_cfg) + 1, 1);
641
642         /* Update ethernet nodes */
643         fdt_fixup_ethernet(blob);
644 #if CONFIG_IS_ENABLED(CMD_PSTORE)
645         /* Append PStore configuration */
646         fdt_fixup_pstore(blob);
647 #endif
648         if (IS_ENABLED(CONFIG_OF_BOARD_SETUP)) {
649                 const char *skip_board_fixup;
650
651                 skip_board_fixup = env_get("skip_board_fixup");
652                 if (skip_board_fixup && ((int)simple_strtol(skip_board_fixup, NULL, 10) == 1)) {
653                         printf("skip board fdt fixup\n");
654                 } else {
655                         fdt_ret = ft_board_setup(blob, gd->bd);
656                         if (fdt_ret) {
657                                 printf("ERROR: board-specific fdt fixup failed: %s\n",
658                                        fdt_strerror(fdt_ret));
659                                 goto err;
660                         }
661                 }
662         }
663         if (IS_ENABLED(CONFIG_OF_SYSTEM_SETUP)) {
664                 fdt_ret = ft_system_setup(blob, gd->bd);
665                 if (fdt_ret) {
666                         printf("ERROR: system-specific fdt fixup failed: %s\n",
667                                fdt_strerror(fdt_ret));
668                         goto err;
669                 }
670         }
671
672         /* Delete the old LMB reservation */
673         if (lmb)
674                 lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,
675                          (phys_size_t)fdt_totalsize(blob));
676
677         ret = fdt_shrink_to_minimum(blob, 0);
678         if (ret < 0)
679                 goto err;
680         of_size = ret;
681
682         if (*initrd_start && *initrd_end) {
683                 of_size += FDT_RAMDISK_OVERHEAD;
684                 fdt_set_totalsize(blob, of_size);
685         }
686         /* Create a new LMB reservation */
687         if (lmb)
688                 lmb_reserve(lmb, (ulong)blob, of_size);
689
690         fdt_initrd(blob, *initrd_start, *initrd_end);
691         if (!ft_verify_fdt(blob))
692                 goto err;
693
694 #if defined(CONFIG_ARCH_KEYSTONE)
695         if (IS_ENABLED(CONFIG_OF_BOARD_SETUP))
696                 ft_board_setup_ex(blob, gd->bd);
697 #endif
698
699         return 0;
700 err:
701         printf(" - must RESET the board to recover.\n\n");
702
703         return ret;
704 }