board/tqc/tqma6/tqma6.c

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  * Author: Fabio Estevam <fabio.estevam@freescale.com>
   4  *
   5  * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
   6  * Author: Markus Niebel <markus.niebel@tq-group.com>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <asm/arch/clock.h>
  12 #include <asm/arch/mx6-pins.h>
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/arch/iomux.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/errno.h>
  17 #include <asm/gpio.h>
  18 #include <asm/io.h>
  19 #include <asm/imx-common/mxc_i2c.h>
  20 #include <asm/imx-common/spi.h>
  21 #include <common.h>
  22 #include <fsl_esdhc.h>
  23 #include <libfdt.h>
  24 #include <i2c.h>
  25 #include <mmc.h>
  26 #include <power/pfuze100_pmic.h>
  27 #include <power/pmic.h>
  28
  29 #include "tqma6_bb.h"
  30
  31 DECLARE_GLOBAL_DATA_PTR;
  32
  33 #define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
  34         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  35
  36 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
  37         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  38
  39 #define GPIO_OUT_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
  40         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  41
  42 #define GPIO_IN_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
  43         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  44
  45 #define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
  46         PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
  47
  48 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
  49         PAD_CTL_DSE_40ohm | PAD_CTL_HYS |                       \
  50         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  51
  52 int dram_init(void)
  53 {
  54         gd->ram_size = imx_ddr_size();
  55
  56         return 0;
  57 }
  58
  59 static const uint16_t tqma6_emmc_dsr = 0x0100;
  60
  61 /* eMMC on USDHCI3 always present */
  62 static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
  63         NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK,          USDHC_PAD_CTRL),
  64         NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD,          USDHC_PAD_CTRL),
  65         NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0,       USDHC_PAD_CTRL),
  66         NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1,       USDHC_PAD_CTRL),
  67         NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2,       USDHC_PAD_CTRL),
  68         NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3,       USDHC_PAD_CTRL),
  69         NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4,       USDHC_PAD_CTRL),
  70         NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5,       USDHC_PAD_CTRL),
  71         NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6,       USDHC_PAD_CTRL),
  72         NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7,       USDHC_PAD_CTRL),
  73         /* eMMC reset */
  74         NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET,        GPIO_OUT_PAD_CTRL),
  75 };
  76
  77 /*
  78  * According to board_mmc_init() the following map is done:
  79  * (U-boot device node)    (Physical Port)
  80  * mmc0                    eMMC (SD3) on TQMa6
  81  * mmc1 .. n               optional slots used on baseboard
  82  */
  83 struct fsl_esdhc_cfg tqma6_usdhc_cfg = {
  84         .esdhc_base = USDHC3_BASE_ADDR,
  85         .max_bus_width = 8,
  86 };
  87
  88 int board_mmc_getcd(struct mmc *mmc)
  89 {
  90         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
  91         int ret = 0;
  92
  93         if (cfg->esdhc_base == USDHC3_BASE_ADDR)
  94                 /* eMMC/uSDHC3 is always present */
  95                 ret = 1;
  96         else
  97                 ret = tqma6_bb_board_mmc_getcd(mmc);
  98
  99         return ret;
 100 }
 101
 102 int board_mmc_getwp(struct mmc *mmc)
 103 {
 104         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 105         int ret = 0;
 106
 107         if (cfg->esdhc_base == USDHC3_BASE_ADDR)
 108                 /* eMMC/uSDHC3 is always present */
 109                 ret = 0;
 110         else
 111                 ret = tqma6_bb_board_mmc_getwp(mmc);
 112
 113         return ret;
 114 }
 115
 116 int board_mmc_init(bd_t *bis)
 117 {
 118         imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads,
 119                                          ARRAY_SIZE(tqma6_usdhc3_pads));
 120         tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 121         if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) {
 122                 puts("Warning: failed to initialize eMMC dev\n");
 123         } else {
 124                 struct mmc *mmc = find_mmc_device(0);
 125                 if (mmc)
 126                         mmc_set_dsr(mmc, tqma6_emmc_dsr);
 127         }
 128
 129         tqma6_bb_board_mmc_init(bis);
 130
 131         return 0;
 132 }
 133
 134 static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
 135         /* SS1 */
 136         NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
 137         NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
 138         NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
 139         NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
 140 };
 141
 142 #define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19)
 143
 144 static unsigned const tqma6_ecspi1_cs[] = {
 145         TQMA6_SF_CS_GPIO,
 146 };
 147
 148 static void tqma6_iomuxc_spi(void)
 149 {
 150         unsigned i;
 151
 152         for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i)
 153                 gpio_direction_output(tqma6_ecspi1_cs[i], 1);
 154         imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads,
 155                                          ARRAY_SIZE(tqma6_ecspi1_pads));
 156 }
 157
 158 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 159 {
 160         return ((bus == CONFIG_SF_DEFAULT_BUS) &&
 161                 (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
 162 }
 163
 164 static struct i2c_pads_info tqma6_i2c3_pads = {
 165         /* I2C3: on board LM75, M24C64,  */
 166         .scl = {
 167                 .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
 168                                          I2C_PAD_CTRL),
 169                 .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
 170                                           I2C_PAD_CTRL),
 171                 .gp = IMX_GPIO_NR(1, 5)
 172         },
 173         .sda = {
 174                 .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
 175                                          I2C_PAD_CTRL),
 176                 .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
 177                                           I2C_PAD_CTRL),
 178                 .gp = IMX_GPIO_NR(1, 6)
 179         }
 180 };
 181
 182 static void tqma6_setup_i2c(void)
 183 {
 184         int ret;
 185         /*
 186          * use logical index for bus, e.g. I2C1 -> 0
 187          * warn on error
 188          */
 189         ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
 190         if (ret)
 191                 printf("setup I2C3 failed: %d\n", ret);
 192 }
 193
 194 int board_early_init_f(void)
 195 {
 196         return tqma6_bb_board_early_init_f();
 197 }
 198
 199 int board_init(void)
 200 {
 201         /* address of boot parameters */
 202         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 203
 204         tqma6_iomuxc_spi();
 205         tqma6_setup_i2c();
 206
 207         tqma6_bb_board_init();
 208
 209         return 0;
 210 }
 211
 212 static const char *tqma6_get_boardname(void)
 213 {
 214         u32 cpurev = get_cpu_rev();
 215
 216         switch ((cpurev & 0xFF000) >> 12) {
 217         case MXC_CPU_MX6SOLO:
 218                 return "TQMa6S";
 219                 break;
 220         case MXC_CPU_MX6DL:
 221                 return "TQMa6DL";
 222                 break;
 223         case MXC_CPU_MX6D:
 224                 return "TQMa6D";
 225                 break;
 226         case MXC_CPU_MX6Q:
 227                 return "TQMa6Q";
 228                 break;
 229         default:
 230                 return "??";
 231         };
 232 }
 233
 234 int board_late_init(void)
 235 {
 236         struct pmic *p;
 237         u32 reg;
 238
 239         setenv("board_name", tqma6_get_boardname());
 240
 241         /*
 242          * configure PFUZE100 PMIC:
 243          * TODO: should go to power_init_board if bus switching is
 244          * fixed in generic power code
 245          */
 246         power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
 247         p = pmic_get("PFUZE100");
 248         if (p && !pmic_probe(p)) {
 249                 pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
 250                 printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
 251         }
 252
 253         tqma6_bb_board_late_init();
 254
 255         return 0;
 256 }
 257
 258 int checkboard(void)
 259 {
 260         printf("Board: %s on a %s\n", tqma6_get_boardname(),
 261                tqma6_bb_get_boardname());
 262         return 0;
 263 }
 264
 265 /*
 266  * Device Tree Support
 267  */
 268 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 269 int ft_board_setup(void *blob, bd_t *bd)
 270 {
 271         /* bring in eMMC dsr settings */
 272         do_fixup_by_path_u32(blob,
 273                              "/soc/aips-bus@02100000/usdhc@02198000",
 274                              "dsr", tqma6_emmc_dsr, 2);
 275         tqma6_bb_ft_board_setup(blob, bd);
 276
 277         return 0;
 278 }
 279 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */