board/ti/omap5_uevm/evm.c

   1 /*
   2  * (C) Copyright 2010
   3  * Texas Instruments Incorporated, <www.ti.com>
   4  * Aneesh V       <aneesh@ti.com>
   5  * Steve Sakoman  <steve@sakoman.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #include <common.h>
  10 #include <palmas.h>
  11 #include <asm/arch/sys_proto.h>
  12 #include <asm/arch/mmc_host_def.h>
  13 #include <tca642x.h>
  14
  15 #include "mux_data.h"
  16
  17 #if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
  18 #include <usb.h>
  19 #include <asm/gpio.h>
  20 #include <asm/arch/clock.h>
  21 #include <asm/arch/ehci.h>
  22 #include <asm/ehci-omap.h>
  23
  24 #define DIE_ID_REG_BASE     (OMAP54XX_L4_CORE_BASE + 0x2000)
  25 #define DIE_ID_REG_OFFSET       0x200
  26
  27 #endif
  28
  29 DECLARE_GLOBAL_DATA_PTR;
  30
  31 const struct omap_sysinfo sysinfo = {
  32         "Board: OMAP5432 uEVM\n"
  33 };
  34
  35 /**
  36  * @brief tca642x_init - uEVM default values for the GPIO expander
  37  * input reg, output reg, polarity reg, configuration reg
  38  */
  39 struct tca642x_bank_info tca642x_init[] = {
  40         { .input_reg = 0x00,
  41           .output_reg = 0x04,
  42           .polarity_reg = 0x00,
  43           .configuration_reg = 0x80 },
  44         { .input_reg = 0x00,
  45           .output_reg = 0x00,
  46           .polarity_reg = 0x00,
  47           .configuration_reg = 0xff },
  48         { .input_reg = 0x00,
  49           .output_reg = 0x00,
  50           .polarity_reg = 0x00,
  51           .configuration_reg = 0x40 },
  52 };
  53
  54 /**
  55  * @brief board_init
  56  *
  57  * @return 0
  58  */
  59 int board_init(void)
  60 {
  61         gpmc_init();
  62         gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
  63         gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
  64
  65         tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
  66
  67         return 0;
  68 }
  69
  70 int board_eth_init(bd_t *bis)
  71 {
  72         return 0;
  73 }
  74
  75 #if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
  76 static void enable_host_clocks(void)
  77 {
  78         int auxclk;
  79         int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
  80                                 OPTFCLKEN_HSIC480M_P3_CLK |
  81                                 OPTFCLKEN_HSIC60M_P2_CLK |
  82                                 OPTFCLKEN_HSIC480M_P2_CLK |
  83                                 OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
  84
  85         /* Enable port 2 and 3 clocks*/
  86         setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
  87
  88         /* Enable port 2 and 3 usb host ports tll clocks*/
  89         setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
  90                         (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
  91 #ifdef CONFIG_USB_XHCI_OMAP
  92         /* Enable the USB OTG Super speed clocks */
  93         setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
  94                         (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
  95 #endif
  96
  97         auxclk = readl((*prcm)->scrm_auxclk1);
  98         /* Request auxilary clock */
  99         auxclk |= AUXCLK_ENABLE_MASK;
 100         writel(auxclk, (*prcm)->scrm_auxclk1);
 101 }
 102 #endif
 103
 104 /**
 105  * @brief misc_init_r - Configure EVM board specific configurations
 106  * such as power configurations, ethernet initialization as phase2 of
 107  * boot sequence
 108  *
 109  * @return 0
 110  */
 111 int misc_init_r(void)
 112 {
 113         int reg;
 114         uint8_t device_mac[6];
 115
 116 #ifdef CONFIG_PALMAS_POWER
 117         palmas_init_settings();
 118 #endif
 119
 120         if (!getenv("usbethaddr")) {
 121                 reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
 122
 123                 /*
 124                  * create a fake MAC address from the processor ID code.
 125                  * first byte is 0x02 to signify locally administered.
 126                  */
 127                 device_mac[0] = 0x02;
 128                 device_mac[1] = readl(reg + 0x10) & 0xff;
 129                 device_mac[2] = readl(reg + 0xC) & 0xff;
 130                 device_mac[3] = readl(reg + 0x8) & 0xff;
 131                 device_mac[4] = readl(reg) & 0xff;
 132                 device_mac[5] = (readl(reg) >> 8) & 0xff;
 133
 134                 eth_setenv_enetaddr("usbethaddr", device_mac);
 135         }
 136
 137         return 0;
 138 }
 139
 140 void set_muxconf_regs_essential(void)
 141 {
 142         do_set_mux((*ctrl)->control_padconf_core_base,
 143                    core_padconf_array_essential,
 144                    sizeof(core_padconf_array_essential) /
 145                    sizeof(struct pad_conf_entry));
 146
 147         do_set_mux((*ctrl)->control_padconf_wkup_base,
 148                    wkup_padconf_array_essential,
 149                    sizeof(wkup_padconf_array_essential) /
 150                    sizeof(struct pad_conf_entry));
 151 }
 152
 153 void set_muxconf_regs_non_essential(void)
 154 {
 155         do_set_mux((*ctrl)->control_padconf_core_base,
 156                    core_padconf_array_non_essential,
 157                    sizeof(core_padconf_array_non_essential) /
 158                    sizeof(struct pad_conf_entry));
 159
 160         do_set_mux((*ctrl)->control_padconf_wkup_base,
 161                    wkup_padconf_array_non_essential,
 162                    sizeof(wkup_padconf_array_non_essential) /
 163                    sizeof(struct pad_conf_entry));
 164 }
 165
 166 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 167 int board_mmc_init(bd_t *bis)
 168 {
 169         omap_mmc_init(0, 0, 0, -1, -1);
 170         omap_mmc_init(1, 0, 0, -1, -1);
 171         return 0;
 172 }
 173 #endif
 174
 175 #ifdef CONFIG_USB_EHCI
 176 static struct omap_usbhs_board_data usbhs_bdata = {
 177         .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 178         .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
 179         .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
 180 };
 181
 182 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 183 {
 184         int ret;
 185
 186         enable_host_clocks();
 187
 188         ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 189         if (ret < 0) {
 190                 puts("Failed to initialize ehci\n");
 191                 return ret;
 192         }
 193
 194         return 0;
 195 }
 196
 197 int ehci_hcd_stop(void)
 198 {
 199         int ret;
 200
 201         ret = omap_ehci_hcd_stop();
 202         return ret;
 203 }
 204
 205 void usb_hub_reset_devices(int port)
 206 {
 207         /* The LAN9730 needs to be reset after the port power has been set. */
 208         if (port == 3) {
 209                 gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
 210                 udelay(10);
 211                 gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
 212         }
 213 }
 214 #endif
 215
 216 #ifdef CONFIG_USB_XHCI_OMAP
 217 /**
 218  * @brief board_usb_init - Configure EVM board specific configurations
 219  * for the LDO's and clocks for the USB blocks.
 220  *
 221  * @return 0
 222  */
 223 int board_usb_init(int index, enum board_usb_init_type init)
 224 {
 225         int ret;
 226 #ifdef CONFIG_PALMAS_USB_SS_PWR
 227         ret = palmas_enable_ss_ldo();
 228 #endif
 229
 230         enable_host_clocks();
 231
 232         return 0;
 233 }
 234 #endif