board/ti/am43xx/board.c

   1 /*
   2  * board.c
   3  *
   4  * Board functions for TI AM43XX based boards
   5  *
   6  * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <i2c.h>
  13 #include <asm/errno.h>
  14 #include <spl.h>
  15 #include <asm/arch/clock.h>
  16 #include <asm/arch/sys_proto.h>
  17 #include <asm/arch/mux.h>
  18 #include "board.h"
  19
  20 DECLARE_GLOBAL_DATA_PTR;
  21
  22 /*
  23  * Read header information from EEPROM into global structure.
  24  */
  25 static int read_eeprom(struct am43xx_board_id *header)
  26 {
  27         /* Check if baseboard eeprom is available */
  28         if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
  29                 printf("Could not probe the EEPROM at 0x%x\n",
  30                        CONFIG_SYS_I2C_EEPROM_ADDR);
  31                 return -ENODEV;
  32         }
  33
  34         /* read the eeprom using i2c */
  35         if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
  36                      sizeof(struct am43xx_board_id))) {
  37                 printf("Could not read the EEPROM\n");
  38                 return -EIO;
  39         }
  40
  41         if (header->magic != 0xEE3355AA) {
  42                 /*
  43                  * read the eeprom using i2c again,
  44                  * but use only a 1 byte address
  45                  */
  46                 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
  47                              sizeof(struct am43xx_board_id))) {
  48                         printf("Could not read the EEPROM at 0x%x\n",
  49                                CONFIG_SYS_I2C_EEPROM_ADDR);
  50                         return -EIO;
  51                 }
  52
  53                 if (header->magic != 0xEE3355AA) {
  54                         printf("Incorrect magic number (0x%x) in EEPROM\n",
  55                                header->magic);
  56                         return -EINVAL;
  57                 }
  58         }
  59
  60         strncpy(am43xx_board_name, (char *)header->name, sizeof(header->name));
  61         am43xx_board_name[sizeof(header->name)] = 0;
  62
  63         return 0;
  64 }
  65
  66 #ifdef CONFIG_SPL_BUILD
  67
  68 const struct dpll_params dpll_ddr = {
  69                 -1, -1, -1, -1, -1, -1, -1};
  70
  71 const struct dpll_params *get_dpll_ddr_params(void)
  72 {
  73         return &dpll_ddr;
  74 }
  75
  76 void set_uart_mux_conf(void)
  77 {
  78         enable_uart0_pin_mux();
  79 }
  80
  81 void set_mux_conf_regs(void)
  82 {
  83         enable_board_pin_mux();
  84 }
  85
  86 void sdram_init(void)
  87 {
  88 }
  89 #endif
  90
  91 int board_init(void)
  92 {
  93         gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
  94
  95         return 0;
  96 }
  97
  98 #ifdef CONFIG_BOARD_LATE_INIT
  99 int board_late_init(void)
 100 {
 101         return 0;
 102 }
 103 #endif