2 * Copyright (C) 2012 Samsung Electronics
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 #include <asm/arch/cpu.h>
29 #include <asm/arch/gpio.h>
30 #include <asm/arch/mmc.h>
31 #include <asm/arch/pinmux.h>
32 #include <asm/arch/sromc.h>
33 #include <power/pmic.h>
35 DECLARE_GLOBAL_DATA_PTR;
38 static int smc9115_pre_init(void)
40 u32 smc_bw_conf, smc_bc_conf;
43 /* Ethernet needs data bus width of 16 bits */
44 smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
45 | SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK);
47 smc_bc_conf = SROMC_BC_TACS(0x01) | SROMC_BC_TCOS(0x01)
48 | SROMC_BC_TACC(0x06) | SROMC_BC_TCOH(0x01)
49 | SROMC_BC_TAH(0x0C) | SROMC_BC_TACP(0x09)
52 /* Select and configure the SROMC bank */
53 err = exynos_pinmux_config(PERIPH_ID_SROMC,
54 CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
56 debug("SROMC not configured\n");
60 s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
67 gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
68 #ifdef CONFIG_EXYNOS_SPI
76 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
77 + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
78 + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
79 + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
80 + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
81 + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
82 + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
83 + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
87 #if defined(CONFIG_POWER)
88 int power_init_board(void)
90 if (pmic_init(I2C_PMIC))
97 void dram_init_banksize(void)
99 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
100 gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
102 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
103 gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
105 gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
106 gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
108 gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
109 gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
111 gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
112 gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
114 gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
115 gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
117 gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
118 gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
120 gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
121 gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
125 int board_eth_init(bd_t *bis)
127 #ifdef CONFIG_SMC911X
128 if (smc9115_pre_init())
130 return smc911x_initialize(0, CONFIG_SMC911X_BASE);
135 #ifdef CONFIG_DISPLAY_BOARDINFO
138 printf("\nBoard: SMDK5250\n");
144 #ifdef CONFIG_GENERIC_MMC
145 int board_mmc_init(bd_t *bis)
149 err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
151 debug("SDMMC0 not configured\n");
155 err = s5p_mmc_init(0, 8);
160 static int board_uart_init(void)
164 err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
166 debug("UART0 not configured\n");
170 err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
172 debug("UART1 not configured\n");
176 err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
178 debug("UART2 not configured\n");
182 err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
184 debug("UART3 not configured\n");
191 #ifdef CONFIG_SYS_I2C_INIT_BOARD
192 static int board_i2c_init(void)
196 for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
197 err = exynos_pinmux_config((PERIPH_ID_I2C0 + i),
200 debug("I2C%d not configured\n", (PERIPH_ID_I2C0 + i));
204 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
209 #ifdef CONFIG_BOARD_EARLY_INIT_F
210 int board_early_init_f(void)
213 err = board_uart_init();
215 debug("UART init failed\n");
218 #ifdef CONFIG_SYS_I2C_INIT_BOARD
219 err = board_i2c_init();