Prepare v2023.10
[platform/kernel/u-boot.git] / board / renesas / draak / draak.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * board/renesas/draak/draak.c
4  *     This file is Draak board support.
5  *
6  * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
7  */
8
9 #include <common.h>
10 #include <cpu_func.h>
11 #include <hang.h>
12 #include <init.h>
13 #include <malloc.h>
14 #include <netdev.h>
15 #include <dm.h>
16 #include <asm/global_data.h>
17 #include <dm/platform_data/serial_sh.h>
18 #include <asm/processor.h>
19 #include <asm/mach-types.h>
20 #include <asm/io.h>
21 #include <linux/bitops.h>
22 #include <linux/errno.h>
23 #include <asm/arch/sys_proto.h>
24 #include <asm/gpio.h>
25 #include <asm/arch/gpio.h>
26 #include <asm/arch/rmobile.h>
27 #include <asm/arch/rcar-mstp.h>
28 #include <asm/arch/sh_sdhi.h>
29 #include <i2c.h>
30 #include <mmc.h>
31
32 DECLARE_GLOBAL_DATA_PTR;
33
34 #define GSX_MSTP112             BIT(12) /* 3DG */
35 #define SCIF2_MSTP310           BIT(10) /* SCIF2 */
36 #define DVFS_MSTP926            BIT(26)
37 #define HSUSB_MSTP704           BIT(4)  /* HSUSB */
38
39 int board_early_init_f(void)
40 {
41 #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
42         /* DVFS for reset */
43         mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
44 #endif
45         return 0;
46 }
47
48 /* HSUSB block registers */
49 #define HSUSB_REG_LPSTS                 0xE6590102
50 #define HSUSB_REG_LPSTS_SUSPM_NORMAL    BIT(14)
51 #define HSUSB_REG_UGCTRL2               0xE6590184
52 #define HSUSB_REG_UGCTRL2_USB0SEL       0x30
53 #define HSUSB_REG_UGCTRL2_USB0SEL_EHCI  0x10
54
55 int board_init(void)
56 {
57         /* USB1 pull-up */
58         setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
59
60         /* Configure the HSUSB block */
61         mstp_clrbits_le32(SMSTPCR7, SMSTPCR7, HSUSB_MSTP704);
62         /* Choice USB0SEL */
63         clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL,
64                         HSUSB_REG_UGCTRL2_USB0SEL_EHCI);
65         /* low power status */
66         setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
67
68         return 0;
69 }