2 * (C) Copyright 2003 Motorola Inc.
3 * Xianghua Xiao,(X.Xiao@motorola.com)
5 * (C) Copyright 2000-2005
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
9 * Add support the Sharp chips on the mpc8260ads.
10 * I started with board/ip860/flash.c and made changes I found in
11 * the MTD project by David Schleef.
13 * See file CREDITS for list of people who contributed to this
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
34 #if !defined(CFG_NO_FLASH)
36 flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
38 #if defined(CFG_ENV_IS_IN_FLASH)
40 # define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
43 # define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
45 # ifndef CFG_ENV_SECT_SIZE
46 # define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
52 /*-----------------------------------------------------------------------
55 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
56 static int write_word (flash_info_t *info, ulong dest, ulong data);
57 static int clear_block_lock_bit(vu_long * addr);
58 /*-----------------------------------------------------------------------
61 unsigned long flash_init (void)
66 /* Init: enable write,
67 * or we cannot even write flash commands
69 for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
70 flash_info[i].flash_id = FLASH_UNKNOWN;
72 /* set the default sector offset */
75 /* Static FLASH Bank configuration here - FIXME XXX */
77 size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
79 if (flash_info[0].flash_id == FLASH_UNKNOWN) {
80 printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
84 /* Re-do sizing to get full correct info */
85 size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
87 flash_info[0].size = size;
89 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
90 /* monitor protection ON by default */
91 flash_protect(FLAG_PROTECT_SET,
93 CFG_MONITOR_BASE+monitor_flash_len-1,
96 #ifdef CFG_ENV_IS_IN_FLASH
97 /* ENV protection ON by default */
98 flash_protect(FLAG_PROTECT_SET,
100 CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
107 /*-----------------------------------------------------------------------
109 void flash_print_info (flash_info_t *info)
113 if (info->flash_id == FLASH_UNKNOWN) {
114 printf ("missing or unknown FLASH type\n");
118 switch (info->flash_id & FLASH_VENDMASK) {
119 case FLASH_MAN_INTEL: printf ("Intel "); break;
120 case FLASH_MAN_SHARP: printf ("Sharp "); break;
121 default: printf ("Unknown Vendor "); break;
124 switch (info->flash_id & FLASH_TYPEMASK) {
125 case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
127 case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
129 case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
131 case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
133 case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
135 case FLASH_28F128J3A: printf ("28F128J3A (128 Mbit, 128 x 128K)\n");
138 default: printf ("Unknown Chip Type\n");
142 printf (" Size: %ld MB in %d Sectors\n",
143 info->size >> 20, info->sector_count);
145 printf (" Sector Start Addresses:");
146 for (i=0; i<info->sector_count; ++i) {
151 info->protect[i] ? " (RO)" : " "
158 * The following code cannot be run from FLASH!
161 static ulong flash_get_size (vu_long *addr, flash_info_t *info)
165 ulong base = (ulong)addr;
169 printf("Check flash at 0x%08x\n",(uint)addr);
171 /* Write "Intelligent Identifier" command: read Manufacturer ID */
176 value = addr[0] & 0x00FF00FF;
179 printf("manufacturer=0x%x\n",(uint)value);
182 case MT_MANUFACT: /* SHARP, MT or => Intel */
184 info->flash_id = FLASH_MAN_INTEL;
187 printf("unknown manufacturer: %x\n", (unsigned int)value);
188 info->flash_id = FLASH_UNKNOWN;
189 info->sector_count = 0;
191 return (0); /* no or unknown flash */
194 value = addr[1] & 0x00FF00FF; /* device ID */
197 printf("deviceID=0x%x\n",(uint)value);
200 case (INTEL_ID_28F016S):
201 info->flash_id += FLASH_28F016SV;
202 info->sector_count = 32;
203 info->size = 0x00400000;
204 sector_offset = 0x20000;
205 break; /* => 2x2 MB */
207 case (INTEL_ID_28F160S3):
208 info->flash_id += FLASH_28F160S3;
209 info->sector_count = 32;
210 info->size = 0x00400000;
211 sector_offset = 0x20000;
212 break; /* => 2x2 MB */
214 case (INTEL_ID_28F320S3):
215 info->flash_id += FLASH_28F320S3;
216 info->sector_count = 64;
217 info->size = 0x00800000;
218 sector_offset = 0x20000;
219 break; /* => 2x4 MB */
221 case (INTEL_ID_28F640J3A):
222 info->flash_id += FLASH_28F640J3A;
223 info->sector_count = 64;
224 info->size = 0x01000000;
225 sector_offset = 0x40000;
226 break; /* => 2x8 MB */
228 case (INTEL_ID_28F128J3A):
229 info->flash_id += FLASH_28F128J3A;
230 info->sector_count = 128;
231 info->size = 0x02000000;
232 sector_offset = 0x40000;
233 break; /* => 2x16 MB */
236 case SHARP_ID_28F016SCL:
237 case SHARP_ID_28F016SCZ:
238 info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
239 info->sector_count = 32;
240 info->size = 0x00800000;
241 sector_offset = 0x40000;
242 break; /* => 4x2 MB */
246 info->flash_id = FLASH_UNKNOWN;
247 return (0); /* => no or unknown flash */
251 /* set up sector start address table */
252 for (i = 0; i < info->sector_count; i++) {
253 info->start[i] = base;
254 base += sector_offset;
255 /* don't know how to check sector protection */
256 info->protect[i] = 0;
260 * Prevent writes to uninitialized FLASH.
262 if (info->flash_id != FLASH_UNKNOWN) {
263 addr = (vu_long *)info->start[0];
264 *addr = 0xFFFFFF; /* reset bank to read array mode */
272 /*-----------------------------------------------------------------------
275 int flash_erase (flash_info_t *info, int s_first, int s_last)
277 int flag, prot, sect;
278 ulong start, now, last;
280 if ((s_first < 0) || (s_first > s_last)) {
281 if (info->flash_id == FLASH_UNKNOWN) {
282 printf ("- missing\n");
284 printf ("- no sectors to erase\n");
289 if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
290 && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
291 printf ("Can't erase unknown flash type %08lx - aborted\n",
297 for (sect=s_first; sect<=s_last; ++sect) {
298 if (info->protect[sect]) {
304 printf ("- Warning: %d protected sectors will not be erased!\n",
311 printf("\nFlash Erase:\n");
313 /* Make Sure Block Lock Bit is not set. */
314 if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
318 /* Start erase on unprotected sectors */
320 printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
322 for (sect = s_first; sect<=s_last; sect++) {
323 if (info->protect[sect] == 0) { /* not protected */
324 vu_long *addr = (vu_long *)(info->start[sect]);
327 last = start = get_timer (0);
329 /* Disable interrupts which might cause a timeout here */
330 flag = disable_interrupts();
335 /* Clear Status Register */
338 /* Single Block Erase Command */
345 if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
346 /* Resume Command, as per errata update */
351 /* re-enable interrupts if necessary */
355 /* wait at least 80us - let's wait 1 ms */
357 while ((*addr & 0x00800080) != 0x00800080) {
358 if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
359 printf ("Timeout\n");
360 *addr = 0xFFFFFFFF; /* reset bank */
364 /* show that we're waiting */
365 if ((now - last) > 1000) { /* every second */
371 /* reset to read mode */
377 printf ("flash erase done\n");
381 /*-----------------------------------------------------------------------
382 * Copy memory to flash, returns:
385 * 2 - Flash not erased
388 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
393 wp = (addr & ~3); /* get lower word aligned address */
396 * handle unaligned start bytes
398 if ((l = addr - wp) != 0) {
400 for (i=0, cp=wp; i<l; ++i, ++cp) {
401 data = (data << 8) | (*(uchar *)cp);
403 for (; i<4 && cnt>0; ++i) {
404 data = (data << 8) | *src++;
408 for (; cnt==0 && i<4; ++i, ++cp) {
409 data = (data << 8) | (*(uchar *)cp);
412 if ((rc = write_word(info, wp, data)) != 0) {
419 * handle word aligned part
423 for (i=0; i<4; ++i) {
424 data = (data << 8) | *src++;
426 if ((rc = write_word(info, wp, data)) != 0) {
438 * handle unaligned tail bytes
441 for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
442 data = (data << 8) | *src++;
445 for (; i<4; ++i, ++cp) {
446 data = (data << 8) | (*(uchar *)cp);
449 return (write_word(info, wp, data));
452 /*-----------------------------------------------------------------------
453 * Write a word to Flash, returns:
456 * 2 - Flash not erased
458 static int write_word (flash_info_t *info, ulong dest, ulong data)
460 vu_long *addr = (vu_long *)dest;
464 /* Check if Flash is (sufficiently) erased */
465 if ((*addr & data) != data) {
468 /* Disable interrupts which might cause a timeout here */
469 flag = disable_interrupts();
478 /* re-enable interrupts if necessary */
482 /* data polling for D7 */
483 start = get_timer (0);
486 while (((csr = *addr) & 0x00800080) != 0x00800080) {
487 if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
492 if (csr & 0x40404040) {
493 printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
497 /* Clear Status Registers Command */
500 /* Reset to read array mode */
507 /*-----------------------------------------------------------------------
508 * Clear Block Lock Bit, returns:
513 static int clear_block_lock_bit(vu_long * addr)
520 /* Clear Status Register */
529 start = get_timer (0);
530 while((*addr & 0x00800080) != 0x00800080){
531 if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
532 printf ("Timeout on clearing Block Lock Bit\n");
533 *addr = 0xFFFFFFFF; /* reset bank */
541 #endif /* !CFG_NO_FLASH */