1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2017 DENX Software Engineering
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
10 #include <linux/libfdt.h>
12 #include <asm/arch/clock.h>
13 #include <asm/arch/mx6-ddr.h>
14 #include <asm/arch/mx6-pins.h>
15 #include "asm/arch/crm_regs.h"
16 #include <asm/arch/sys_proto.h>
17 #include <asm/arch/imx-regs.h>
18 #include "asm/arch/iomux.h"
19 #include <asm/mach-imx/iomux-v3.h>
21 #include <fsl_esdhc_imx.h>
23 #include <bootcount.h>
27 DECLARE_GLOBAL_DATA_PTR;
29 static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
30 .dram_sdclk_0 = 0x00000030,
31 .dram_sdclk_1 = 0x00000030,
32 .dram_cas = 0x00000030,
33 .dram_ras = 0x00000030,
34 .dram_reset = 0x00000030,
35 .dram_sdcke0 = 0x00003000,
36 .dram_sdcke1 = 0x00003000,
37 .dram_sdba2 = 0x00000000,
38 .dram_sdodt0 = 0x00000030,
39 .dram_sdodt1 = 0x00000030,
41 .dram_sdqs0 = 0x00000030,
42 .dram_sdqs1 = 0x00000030,
43 .dram_sdqs2 = 0x00000030,
44 .dram_sdqs3 = 0x00000030,
45 .dram_sdqs4 = 0x00000030,
46 .dram_sdqs5 = 0x00000030,
47 .dram_sdqs6 = 0x00000030,
48 .dram_sdqs7 = 0x00000030,
50 .dram_dqm0 = 0x00000030,
51 .dram_dqm1 = 0x00000030,
52 .dram_dqm2 = 0x00000030,
53 .dram_dqm3 = 0x00000030,
54 .dram_dqm4 = 0x00000030,
55 .dram_dqm5 = 0x00000030,
56 .dram_dqm6 = 0x00000030,
57 .dram_dqm7 = 0x00000030,
60 static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
61 .grp_ddr_type = 0x000c0000,
62 .grp_ddrmode_ctl = 0x00020000,
63 .grp_ddrpke = 0x00000000,
64 .grp_addds = 0x00000030,
65 .grp_ctlds = 0x00000030,
66 .grp_ddrmode = 0x00020000,
67 .grp_b0ds = 0x00000030,
68 .grp_b1ds = 0x00000030,
69 .grp_b2ds = 0x00000030,
70 .grp_b3ds = 0x00000030,
71 .grp_b4ds = 0x00000030,
72 .grp_b5ds = 0x00000030,
73 .grp_b6ds = 0x00000030,
74 .grp_b7ds = 0x00000030,
78 static const struct mx6_mmdc_calibration mx6_4x256mx16_mmdc_calib = {
79 .p0_mpwldectrl0 = 0x002D0028,
80 .p0_mpwldectrl1 = 0x0032002D,
81 .p1_mpwldectrl0 = 0x00210036,
82 .p1_mpwldectrl1 = 0x0019002E,
83 .p0_mpdgctrl0 = 0x4349035C,
84 .p0_mpdgctrl1 = 0x0348033D,
85 .p1_mpdgctrl0 = 0x43550362,
86 .p1_mpdgctrl1 = 0x03520316,
87 .p0_mprddlctl = 0x41393940,
88 .p1_mprddlctl = 0x3F3A3C47,
89 .p0_mpwrdlctl = 0x413A423A,
90 .p1_mpwrdlctl = 0x4042483E,
93 /* MT41K128M16JT-125 (2Gb density) */
94 static const struct mx6_ddr3_cfg mt41k128m16jt_125 = {
107 iomux_v3_cfg_t const uart_console_pads[] = {
109 MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
110 MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
111 MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
112 MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
115 void displ5_set_iomux_uart_spl(void)
117 SETUP_IOMUX_PADS(uart_console_pads);
120 iomux_v3_cfg_t const misc_pads_spl[] = {
121 /* Emergency recovery pin */
122 MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
125 void displ5_set_iomux_misc_spl(void)
127 SETUP_IOMUX_PADS(misc_pads_spl);
130 #ifdef CONFIG_MXC_SPI
131 iomux_v3_cfg_t const ecspi2_pads[] = {
132 /* SPI2, NOR Flash nWP, CS0 */
133 MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
134 MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
135 MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
136 MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
137 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
140 int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
142 if (bus != 1 || cs != 0)
145 return IMX_GPIO_NR(5, 29);
148 void displ5_set_iomux_ecspi_spl(void)
150 SETUP_IOMUX_PADS(ecspi2_pads);
154 void displ5_set_iomux_ecspi_spl(void) {}
157 #ifdef CONFIG_FSL_ESDHC_IMX
158 iomux_v3_cfg_t const usdhc4_pads[] = {
159 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
160 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
161 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
162 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
163 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
164 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
165 MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
166 MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
167 MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
168 MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
169 MX6_PAD_NANDF_ALE__SD4_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
172 void displ5_set_iomux_usdhc_spl(void)
174 SETUP_IOMUX_PADS(usdhc4_pads);
178 void displ5_set_iomux_usdhc_spl(void) {}
181 static void ccgr_init(void)
183 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
185 writel(0x00C03F3F, &ccm->CCGR0);
186 writel(0x0030FC3F, &ccm->CCGR1);
187 writel(0x0FFFCFC0, &ccm->CCGR2);
188 writel(0x3FF00000, &ccm->CCGR3);
189 writel(0x00FFF300, &ccm->CCGR4);
190 writel(0x0F0000C3, &ccm->CCGR5);
191 writel(0x000003FF, &ccm->CCGR6);
194 #ifdef CONFIG_MX6_DDRCAL
195 static void spl_dram_print_cal(struct mx6_ddr_sysinfo const *sysinfo)
197 struct mx6_mmdc_calibration calibration = {0};
199 mmdc_read_calibration(sysinfo, &calibration);
201 debug(".p0_mpdgctrl0\t= 0x%08X\n", calibration.p0_mpdgctrl0);
202 debug(".p0_mpdgctrl1\t= 0x%08X\n", calibration.p0_mpdgctrl1);
203 debug(".p0_mprddlctl\t= 0x%08X\n", calibration.p0_mprddlctl);
204 debug(".p0_mpwrdlctl\t= 0x%08X\n", calibration.p0_mpwrdlctl);
205 debug(".p0_mpwldectrl0\t= 0x%08X\n", calibration.p0_mpwldectrl0);
206 debug(".p0_mpwldectrl1\t= 0x%08X\n", calibration.p0_mpwldectrl1);
207 debug(".p1_mpdgctrl0\t= 0x%08X\n", calibration.p1_mpdgctrl0);
208 debug(".p1_mpdgctrl1\t= 0x%08X\n", calibration.p1_mpdgctrl1);
209 debug(".p1_mprddlctl\t= 0x%08X\n", calibration.p1_mprddlctl);
210 debug(".p1_mpwrdlctl\t= 0x%08X\n", calibration.p1_mpwrdlctl);
211 debug(".p1_mpwldectrl0\t= 0x%08X\n", calibration.p1_mpwldectrl0);
212 debug(".p1_mpwldectrl1\t= 0x%08X\n", calibration.p1_mpwldectrl1);
215 static void spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo)
219 /* Perform DDR DRAM calibration */
221 ret = mmdc_do_write_level_calibration(sysinfo);
223 printf("DDR: Write level calibration error [%d]\n", ret);
227 ret = mmdc_do_dqs_calibration(sysinfo);
229 printf("DDR: DQS calibration error [%d]\n", ret);
233 spl_dram_print_cal(sysinfo);
235 #endif /* CONFIG_MX6_DDRCAL */
237 static void spl_dram_init(void)
239 struct mx6_ddr_sysinfo sysinfo = {
240 /* width of data bus:0=16,1=32,2=64 */
242 /* config for full 4GB range so that get_mem_size() works */
243 .cs_density = 32, /* 32Gb per CS */
244 /* single chip select */
247 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
248 .rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */
249 .walat = 1, /* Write additional latency */
250 .ralat = 5, /* Read additional latency */
251 .mif3_mode = 3, /* Command prediction working mode */
252 .bi_on = 1, /* Bank interleaving enabled */
253 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
254 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
255 .pd_fast_exit = 1, /* enable precharge power-down fast exit */
256 .ddr_type = DDR_TYPE_DDR3,
257 .refsel = 1, /* Refresh cycles at 32KHz */
258 .refr = 7, /* 8 refresh commands per refresh cycle */
261 mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
262 mx6_dram_cfg(&sysinfo, &mx6_4x256mx16_mmdc_calib, &mt41k128m16jt_125);
264 #ifdef CONFIG_MX6_DDRCAL
265 spl_dram_perform_cal(&sysinfo);
269 #ifdef CONFIG_SPL_SPI_SUPPORT
270 static void displ5_init_ecspi(void)
272 displ5_set_iomux_ecspi_spl();
273 enable_spi_clk(1, 1);
276 static inline void displ5_init_ecspi(void) { }
279 #ifdef CONFIG_SPL_MMC_SUPPORT
280 static struct fsl_esdhc_cfg usdhc_cfg = {
281 .esdhc_base = USDHC4_BASE_ADDR,
285 int board_mmc_init(bd_t *bd)
287 displ5_set_iomux_usdhc_spl();
289 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
290 gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
292 return fsl_esdhc_initialize(bd, &usdhc_cfg);
296 void board_init_f(ulong dummy)
307 displ5_set_iomux_uart_spl();
309 /* UART clocks enabled and gd valid - init serial console */
310 preloader_console_init();
314 /* DDR initialization */
318 memset(__bss_start, 0, __bss_end - __bss_start);
320 displ5_set_iomux_misc_spl();
322 /* Initialize and reset WDT in SPL */
326 /* load/boot image from boot device */
327 board_init_r(NULL, 0);
330 #define EM_PAD IMX_GPIO_NR(3, 29)
331 int board_check_emergency_pad(void)
335 ret = gpio_direction_input(EM_PAD);
339 return !gpio_get_value(EM_PAD);
342 void board_boot_order(u32 *spl_boot_list)
344 /* Default boot sequence SPI -> MMC */
345 spl_boot_list[0] = spl_boot_device();
346 spl_boot_list[1] = BOOT_DEVICE_MMC1;
347 spl_boot_list[2] = BOOT_DEVICE_UART;
348 spl_boot_list[3] = BOOT_DEVICE_NONE;
351 * In case of emergency PAD pressed, we always boot
352 * to proper u-boot and perform recovery tasks there.
354 if (board_check_emergency_pad())
357 #ifdef CONFIG_SPL_ENV_SUPPORT
361 if (env_init() || env_load())
364 s = env_get("BOOT_FROM");
365 if (s && !bootcount_error() && strcmp(s, "ACTIVE") == 0) {
366 spl_boot_list[0] = BOOT_DEVICE_MMC1;
367 spl_boot_list[1] = spl_boot_device();
372 void reset_cpu(ulong addr) {}
374 #ifdef CONFIG_SPL_LOAD_FIT
375 int board_fit_config_name_match(const char *name)
381 #ifdef CONFIG_SPL_OS_BOOT
382 /* Return: 1 - boot to U-Boot. 0 - boot OS (falcon mode) */
383 int spl_start_uboot(void)
385 /* break into full u-boot on 'c' */
386 if (serial_tstc() && serial_getc() == 'c')
389 #ifdef CONFIG_SPL_ENV_SUPPORT
390 if (env_get_yesno("boot_os") != 1)