board/hymod/flash.c

   1 /*
   2  * (C) Copyright 2000
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  *
  23  * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00
  24  */
  25
  26 #include <common.h>
  27 #include <mpc8260.h>
  28 #include <board/hymod/flash.h>
  29
  30 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];    /* info for FLASH chips */
  31
  32 /*-----------------------------------------------------------------------
  33  * Protection Flags:
  34  */
  35 #define FLAG_PROTECT_SET        0x01
  36 #define FLAG_PROTECT_CLEAR      0x02
  37
  38 /*-----------------------------------------------------------------------
  39  */
  40
  41 /*
  42  * probe for flash bank at address "base" and store info about it
  43  * in the flash_info entry "fip". Fatal error if nothing there.
  44  */
  45 static void
  46 bank_probe (flash_info_t *fip, volatile bank_addr_t base)
  47 {
  48         volatile bank_addr_t addr;
  49         bank_word_t word;
  50         int i;
  51
  52         /* reset the flash */
  53         *base = BANK_CMD_RST;
  54
  55         /* put flash into read id mode */
  56         *base = BANK_CMD_RD_ID;
  57
  58         /* check the manufacturer id - must be intel */
  59         word = *BANK_REG_MAN_CODE (base);
  60         if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff))
  61                 panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx",
  62                         (unsigned long)word, (unsigned long)base);
  63
  64         /* check the device id */
  65         word = *BANK_REG_DEV_CODE (base);
  66         switch (word) {
  67
  68         case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff):
  69                 fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J5;
  70                 fip->sector_count = 32;
  71                 break;
  72
  73         case BANK_FILL_WORD (INTEL_ID_28F640J5&0xff):
  74                 fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J5;
  75                 fip->sector_count = 64;
  76                 break;
  77
  78         case BANK_FILL_WORD (INTEL_ID_28F320J3A&0xff):
  79                 fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J3A;
  80                 fip->sector_count = 32;
  81                 break;
  82
  83         case BANK_FILL_WORD (INTEL_ID_28F640J3A&0xff):
  84                 fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J3A;
  85                 fip->sector_count = 64;
  86                 break;
  87
  88         case BANK_FILL_WORD (INTEL_ID_28F128J3A&0xff):
  89                 fip->flash_id = FLASH_MAN_INTEL | FLASH_28F128J3A;
  90                 fip->sector_count = 128;
  91                 break;
  92
  93         default:
  94                 panic ("\nbad device code (0x%08lx) at addr 0x%08lx",
  95                         (unsigned long)word, (unsigned long)base);
  96         }
  97
  98         if (fip->sector_count >= CONFIG_SYS_MAX_FLASH_SECT)
  99                 panic ("\ntoo many sectors (%d) in flash at address 0x%08lx",
 100                         fip->sector_count, (unsigned long)base);
 101
 102         addr = base;
 103         for (i = 0; i < fip->sector_count; i++) {
 104                 fip->start[i] = (unsigned long)addr;
 105                 fip->protect[i] = 0;
 106                 addr = BANK_ADDR_NEXT_BLK (addr);
 107         }
 108
 109         fip->size = (bank_size_t)addr - (bank_size_t)base;
 110
 111         /* reset the flash */
 112         *base = BANK_CMD_RST;
 113 }
 114
 115 static void
 116 bank_reset (flash_info_t *info, int sect)
 117 {
 118         volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
 119
 120 #ifdef FLASH_DEBUG
 121         printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr);
 122 #endif
 123
 124         *addr = BANK_CMD_RST;
 125 }
 126
 127 static void
 128 bank_erase_init (flash_info_t *info, int sect)
 129 {
 130         volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
 131         int flag;
 132
 133 #ifdef FLASH_DEBUG
 134         printf ("erasing sector %d, addr = 0x%08lx\n",
 135                 sect, (unsigned long)addr);
 136 #endif
 137
 138         /* Disable intrs which might cause a timeout here */
 139         flag = disable_interrupts ();
 140
 141 #ifdef FLASH_DEBUG
 142         printf ("writing erase cmd to addr 0x%08lx\n", (unsigned long)addr);
 143 #endif
 144         *addr = BANK_CMD_ERASE1;
 145         *addr = BANK_CMD_ERASE2;
 146
 147         /* re-enable interrupts if necessary */
 148         if (flag)
 149                 enable_interrupts ();
 150 }
 151
 152 static int
 153 bank_erase_poll (flash_info_t *info, int sect)
 154 {
 155         volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
 156         bank_word_t stat = *addr;
 157
 158 #ifdef FLASH_DEBUG
 159         printf ("checking status at addr 0x%08lx [0x%08lx]\n",
 160                 (unsigned long)addr, (unsigned long)stat);
 161 #endif
 162
 163         if ((stat & BANK_STAT_RDY) == BANK_STAT_RDY) {
 164                 if ((stat & BANK_STAT_ERR) != 0) {
 165                         printf ("failed on sector %d [0x%08lx] at "
 166                                 "address 0x%08lx\n", sect,
 167                                 (unsigned long)stat, (unsigned long)addr);
 168                         *addr = BANK_CMD_CLR_STAT;
 169                         return (-1);
 170                 }
 171                 else
 172                         return (1);
 173         }
 174         else
 175                 return (0);
 176 }
 177
 178 static int
 179 bank_write_word (volatile bank_addr_t addr, bank_word_t value)
 180 {
 181         bank_word_t stat;
 182         ulong start;
 183         int flag, retval;
 184
 185         /* Disable interrupts which might cause a timeout here */
 186         flag = disable_interrupts ();
 187
 188         *addr = BANK_CMD_PROG;
 189
 190         *addr = value;
 191
 192         /* re-enable interrupts if necessary */
 193         if (flag)
 194                 enable_interrupts ();
 195
 196         retval = 0;
 197
 198         /* data polling for D7 */
 199         start = get_timer (0);
 200         do {
 201                 if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 202                         retval = 1;
 203                         goto done;
 204                 }
 205                 stat = *addr;
 206         } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
 207
 208         if ((stat & BANK_STAT_ERR) != 0) {
 209                 printf ("flash program failed [0x%08lx] at address 0x%08lx\n",
 210                         (unsigned long)stat, (unsigned long)addr);
 211                 *addr = BANK_CMD_CLR_STAT;
 212                 retval = 3;
 213         }
 214
 215 done:
 216         /* reset to read mode */
 217         *addr = BANK_CMD_RST;
 218
 219         return (retval);
 220 }
 221
 222 /*-----------------------------------------------------------------------
 223  */
 224
 225 unsigned long
 226 flash_init (void)
 227 {
 228         int i;
 229
 230         /* Init: no FLASHes known */
 231         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 232                 flash_info[i].flash_id = FLASH_UNKNOWN;
 233         }
 234
 235         bank_probe (&flash_info[0], (bank_addr_t)CONFIG_SYS_FLASH_BASE);
 236
 237         /*
 238          * protect monitor and environment sectors
 239          */
 240
 241 #if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 242         (void)flash_protect (FLAG_PROTECT_SET,
 243                       CONFIG_SYS_MONITOR_BASE,
 244                       CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 245                       &flash_info[0]);
 246 #endif
 247
 248 #if defined(CONFIG_SYS_FLASH_ENV_ADDR)
 249         (void)flash_protect (FLAG_PROTECT_SET,
 250                       CONFIG_SYS_FLASH_ENV_ADDR,
 251 #if defined(CONFIG_SYS_FLASH_ENV_BUF)
 252                       CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_BUF - 1,
 253 #else
 254                       CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_SIZE - 1,
 255 #endif
 256                       &flash_info[0]);
 257 #endif
 258
 259         return flash_info[0].size;
 260 }
 261
 262 /*-----------------------------------------------------------------------
 263  */
 264 void
 265 flash_print_info (flash_info_t *info)
 266 {
 267         int i;
 268
 269         if (info->flash_id == FLASH_UNKNOWN) {
 270                 printf ("missing or unknown FLASH type\n");
 271                 return;
 272         }
 273
 274         switch (info->flash_id & FLASH_VENDMASK) {
 275         case FLASH_MAN_INTEL:   printf ("INTEL ");              break;
 276         default:                printf ("Unknown Vendor ");     break;
 277         }
 278
 279         switch (info->flash_id & FLASH_TYPEMASK) {
 280         case FLASH_28F320J5:    printf ("28F320J5 (32 Mbit, 2 x 16bit)\n");
 281                                 break;
 282         case FLASH_28F640J5:    printf ("28F640J5 (64 Mbit, 2 x 16bit)\n");
 283                                 break;
 284         case FLASH_28F320J3A:   printf ("28F320J3A (32 Mbit, 2 x 16bit)\n");
 285                                 break;
 286         case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 2 x 16bit)\n");
 287                                 break;
 288         case FLASH_28F128J3A:   printf ("28F320J3A (128 Mbit, 2 x 16bit)\n");
 289                                 break;
 290         default:                printf ("Unknown Chip Type\n");
 291                                 break;
 292         }
 293
 294         printf ("  Size: %ld MB in %d Sectors\n",
 295                 info->size >> 20, info->sector_count);
 296
 297         printf ("  Sector Start Addresses:");
 298         for (i=0; i<info->sector_count; ++i) {
 299                 if ((i % 5) == 0)
 300                         printf ("\n   ");
 301                 printf (" %08lX%s",
 302                         info->start[i],
 303                         info->protect[i] ? " (RO)" : "     "
 304                 );
 305         }
 306         printf ("\n");
 307         return;
 308 }
 309
 310 /*
 311  * The following code cannot be run from FLASH!
 312  */
 313
 314 /*-----------------------------------------------------------------------
 315  */
 316
 317 int
 318 flash_erase (flash_info_t *info, int s_first, int s_last)
 319 {
 320         int prot, sect, haderr;
 321         ulong start, now, last;
 322         int rcode = 0;
 323
 324 #ifdef FLASH_DEBUG
 325         printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
 326                 "  Bank # %d: ", s_last - s_first + 1, s_first, s_last,
 327                 (info - flash_info) + 1);
 328         flash_print_info (info);
 329 #endif
 330
 331         if ((s_first < 0) || (s_first > s_last)) {
 332                 if (info->flash_id == FLASH_UNKNOWN) {
 333                         printf ("- missing\n");
 334                 } else {
 335                         printf ("- no sectors to erase\n");
 336                 }
 337                 return 1;
 338         }
 339
 340         prot = 0;
 341         for (sect = s_first; sect <= s_last; ++sect) {
 342                 if (info->protect[sect]) {
 343                         prot++;
 344                 }
 345         }
 346
 347         if (prot) {
 348                 printf ("- Warning: %d protected sector%s will not be erased\n",
 349                         prot, (prot > 1 ? "s" : ""));
 350         }
 351
 352         start = get_timer (0);
 353         last = 0;
 354         haderr = 0;
 355
 356         for (sect = s_first; sect <= s_last; sect++) {
 357                 if (info->protect[sect] == 0) { /* not protected */
 358                         ulong estart;
 359                         int sectdone;
 360
 361                         bank_erase_init (info, sect);
 362
 363                         /* wait at least 80us - let's wait 1 ms */
 364                         udelay (1000);
 365
 366                         estart = get_timer (start);
 367
 368                         do {
 369                                 now = get_timer (start);
 370
 371                                 if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 372                                         printf ("Timeout (sect %d)\n", sect);
 373                                         haderr = 1;
 374                                         rcode = 1;
 375                                         break;
 376                                 }
 377
 378 #ifndef FLASH_DEBUG
 379                                 /* show that we're waiting */
 380                                 if ((now - last) > 1000) { /* every second */
 381                                         putc ('.');
 382                                         last = now;
 383                                 }
 384 #endif
 385
 386                                 sectdone = bank_erase_poll (info, sect);
 387
 388                                 if (sectdone < 0) {
 389                                         haderr = 1;
 390                                         rcode = 1;
 391                                         break;
 392                                 }
 393
 394                         } while (!sectdone);
 395
 396                         if (haderr)
 397                                 break;
 398                 }
 399         }
 400
 401         if (haderr > 0)
 402                 printf (" failed\n");
 403         else
 404                 printf (" done\n");
 405
 406         /* reset to read mode */
 407         for (sect = s_first; sect <= s_last; sect++) {
 408                 if (info->protect[sect] == 0) { /* not protected */
 409                         bank_reset (info, sect);
 410                 }
 411         }
 412         return rcode;
 413 }
 414
 415 /*-----------------------------------------------------------------------
 416  * Write a word to Flash, returns:
 417  * 0 - OK
 418  * 1 - write timeout
 419  * 2 - Flash not erased
 420  * 3 - Program failed
 421  */
 422 static int
 423 write_word (flash_info_t *info, ulong dest, ulong data)
 424 {
 425         /* Check if Flash is (sufficiently) erased */
 426         if ((*(ulong *)dest & data) != data)
 427                 return (2);
 428
 429         return (bank_write_word ((bank_addr_t)dest, (bank_word_t)data));
 430 }
 431
 432 /*-----------------------------------------------------------------------
 433  * Copy memory to flash, returns:
 434  * 0 - OK
 435  * 1 - write timeout
 436  * 2 - Flash not erased
 437  * 3 - Program failed
 438  */
 439
 440 int
 441 write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 442 {
 443         ulong cp, wp, data;
 444         int i, l, rc;
 445
 446         wp = (addr & ~3);       /* get lower word aligned address */
 447
 448         /*
 449          * handle unaligned start bytes
 450          */
 451         if ((l = addr - wp) != 0) {
 452                 data = 0;
 453                 for (i=0, cp=wp; i<l; ++i, ++cp) {
 454                         data = (data << 8) | (*(uchar *)cp);
 455                 }
 456                 for (; i<4 && cnt>0; ++i) {
 457                         data = (data << 8) | *src++;
 458                         --cnt;
 459                         ++cp;
 460                 }
 461                 for (; cnt==0 && i<4; ++i, ++cp) {
 462                         data = (data << 8) | (*(uchar *)cp);
 463                 }
 464
 465                 if ((rc = write_word (info, wp, data)) != 0) {
 466                         return (rc);
 467                 }
 468                 wp += 4;
 469         }
 470
 471         /*
 472          * handle word aligned part
 473          */
 474         while (cnt >= 4) {
 475                 data = 0;
 476                 for (i=0; i<4; ++i) {
 477                         data = (data << 8) | *src++;
 478                 }
 479                 if ((rc = write_word (info, wp, data)) != 0) {
 480                         return (rc);
 481                 }
 482                 wp  += 4;
 483                 cnt -= 4;
 484         }
 485
 486         if (cnt == 0) {
 487                 return (0);
 488         }
 489
 490         /*
 491          * handle unaligned tail bytes
 492          */
 493         data = 0;
 494         for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
 495                 data = (data << 8) | *src++;
 496                 --cnt;
 497         }
 498         for (; i<4; ++i, ++cp) {
 499                 data = (data << 8) | (*(uchar *)cp);
 500         }
 501
 502         return (write_word (info, wp, data));
 503 }
 504
 505 /*-----------------------------------------------------------------------
 506  */