board/ge/mx53ppd/mx53ppd.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2017 General Electric Company
   4  *
   5  * Based on board/freescale/mx53loco/mx53loco.c:
   6  *
   7  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   8  * Jason Liu <r64343@freescale.com>
   9  */
  10
  11 #include <common.h>
  12 #include <asm/io.h>
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/arch/sys_proto.h>
  15 #include <asm/arch/crm_regs.h>
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/iomux-mx53.h>
  18 #include <asm/arch/clock.h>
  19 #include <linux/errno.h>
  20 #include <asm/mach-imx/mxc_i2c.h>
  21 #include <asm/mach-imx/mx5_video.h>
  22 #include <environment.h>
  23 #include <netdev.h>
  24 #include <i2c.h>
  25 #include <mmc.h>
  26 #include <fsl_esdhc.h>
  27 #include <asm/gpio.h>
  28 #include <power/pmic.h>
  29 #include <dialog_pmic.h>
  30 #include <fsl_pmic.h>
  31 #include <linux/fb.h>
  32 #include <ipu_pixfmt.h>
  33 #include <watchdog.h>
  34 #include "ppd_gpio.h"
  35 #include <stdlib.h>
  36 #include "../../ge/common/ge_common.h"
  37 #include "../../ge/common/vpd_reader.h"
  38
  39 #define MX53PPD_LCD_POWER               IMX_GPIO_NR(3, 24)
  40
  41 DECLARE_GLOBAL_DATA_PTR;
  42
  43 static u32 mx53_dram_size[2];
  44
  45 phys_size_t get_effective_memsize(void)
  46 {
  47         /*
  48          * WARNING: We must override get_effective_memsize() function here
  49          * to report only the size of the first DRAM bank. This is to make
  50          * U-Boot relocator place U-Boot into valid memory, that is, at the
  51          * end of the first DRAM bank. If we did not override this function
  52          * like so, U-Boot would be placed at the address of the first DRAM
  53          * bank + total DRAM size - sizeof(uboot), which in the setup where
  54          * each DRAM bank contains 512MiB of DRAM would result in placing
  55          * U-Boot into invalid memory area close to the end of the first
  56          * DRAM bank.
  57          */
  58         return mx53_dram_size[0];
  59 }
  60
  61 int dram_init(void)
  62 {
  63         mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
  64         mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
  65
  66         gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
  67
  68         return 0;
  69 }
  70
  71 int dram_init_banksize(void)
  72 {
  73         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  74         gd->bd->bi_dram[0].size = mx53_dram_size[0];
  75
  76         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
  77         gd->bd->bi_dram[1].size = mx53_dram_size[1];
  78
  79         return 0;
  80 }
  81
  82 u32 get_board_rev(void)
  83 {
  84         return get_cpu_rev() & ~(0xF << 8);
  85 }
  86
  87 #define UART_PAD_CTRL   (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
  88                          PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
  89
  90 #ifdef CONFIG_USB_EHCI_MX5
  91 int board_ehci_hcd_init(int port)
  92 {
  93         /* request VBUS power enable pin, GPIO7_8 */
  94         imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8);
  95         gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
  96         return 0;
  97 }
  98 #endif
  99
 100 static void setup_iomux_fec(void)
 101 {
 102         static const iomux_v3_cfg_t fec_pads[] = {
 103                 NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
 104                              PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP |
 105                              PAD_CTL_ODE),
 106                 NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
 107                 NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
 108                              PAD_CTL_HYS | PAD_CTL_PKE),
 109                 NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
 110                              PAD_CTL_HYS | PAD_CTL_PKE),
 111                 NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
 112                 NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
 113                 NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
 114                 NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
 115                              PAD_CTL_HYS | PAD_CTL_PKE),
 116                 NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
 117                              PAD_CTL_HYS | PAD_CTL_PKE),
 118                 NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
 119                              PAD_CTL_HYS | PAD_CTL_PKE),
 120         };
 121
 122         imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 123 }
 124
 125 #ifdef CONFIG_FSL_ESDHC
 126 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 127         {MMC_SDHC3_BASE_ADDR},
 128         {MMC_SDHC1_BASE_ADDR},
 129 };
 130
 131 int board_mmc_getcd(struct mmc *mmc)
 132 {
 133         return 1;
 134 }
 135
 136 #define SD_CMD_PAD_CTRL         (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
 137                                  PAD_CTL_PUS_100K_UP)
 138 #define SD_PAD_CTRL             (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
 139                                  PAD_CTL_DSE_HIGH)
 140
 141 int board_mmc_init(bd_t *bis)
 142 {
 143         static const iomux_v3_cfg_t sd1_pads[] = {
 144                 NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
 145                              SD_CMD_PAD_CTRL),
 146                 NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
 147                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
 148                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
 149                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
 150                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
 151                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
 152                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
 153                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
 154                 NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
 155                 MX53_PAD_EIM_DA11__GPIO3_11,
 156         };
 157
 158         static const iomux_v3_cfg_t sd2_pads[] = {
 159                 NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
 160                 NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
 161                 NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
 162                 NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
 163                 NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
 164                 NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
 165                 MX53_PAD_EIM_DA13__GPIO3_13,
 166         };
 167
 168         u32 index;
 169         int ret;
 170
 171         esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 172         esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 173
 174         for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 175                 switch (index) {
 176                 case 0:
 177                         imx_iomux_v3_setup_multiple_pads(sd1_pads,
 178                                                          ARRAY_SIZE(sd1_pads));
 179                         break;
 180                 case 1:
 181                         imx_iomux_v3_setup_multiple_pads(sd2_pads,
 182                                                          ARRAY_SIZE(sd2_pads));
 183                         break;
 184                 default:
 185                         printf("Warning: you configured more ESDHC controller (%d) as supported by the board(2)\n",
 186                                CONFIG_SYS_FSL_ESDHC_NUM);
 187                         return -EINVAL;
 188                 }
 189                 ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
 190                 if (ret)
 191                         return ret;
 192         }
 193
 194         return 0;
 195 }
 196 #endif
 197
 198 #define I2C_PAD_CTRL    (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 199                          PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
 200
 201 static void setup_iomux_i2c(void)
 202 {
 203         static const iomux_v3_cfg_t i2c1_pads[] = {
 204                 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
 205                 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
 206         };
 207
 208         imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
 209 }
 210
 211 #define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
 212
 213 static struct i2c_pads_info i2c_pad_info1 = {
 214         .scl = {
 215                 .i2c_mode = MX53_PAD_EIM_D21__I2C1_SCL | I2C_PAD,
 216                 .gpio_mode = MX53_PAD_EIM_D28__GPIO3_28 | I2C_PAD,
 217                 .gp = IMX_GPIO_NR(3, 28)
 218         },
 219         .sda = {
 220                 .i2c_mode = MX53_PAD_EIM_D28__I2C1_SDA | I2C_PAD,
 221                 .gpio_mode = MX53_PAD_EIM_D21__GPIO3_21 | I2C_PAD,
 222                 .gp = IMX_GPIO_NR(3, 21)
 223         }
 224 };
 225
 226 static int clock_1GHz(void)
 227 {
 228         int ret;
 229         u32 ref_clk = MXC_HCLK;
 230         /*
 231          * After increasing voltage to 1.25V, we can switch
 232          * CPU clock to 1GHz and DDR to 400MHz safely
 233          */
 234         ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
 235         if (ret) {
 236                 printf("CPU:   Switch CPU clock to 1GHZ failed\n");
 237                 return -1;
 238         }
 239
 240         ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
 241         ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
 242         if (ret) {
 243                 printf("CPU:   Switch DDR clock to 400MHz failed\n");
 244                 return -1;
 245         }
 246
 247         return 0;
 248 }
 249
 250 void ppd_gpio_init(void)
 251 {
 252         int i;
 253
 254         imx_iomux_v3_setup_multiple_pads(ppd_pads, ARRAY_SIZE(ppd_pads));
 255         for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i)
 256                 gpio_direction_output(ppd_gpios[i].gpio, ppd_gpios[i].value);
 257 }
 258
 259 int board_early_init_f(void)
 260 {
 261         setup_iomux_fec();
 262         setup_iomux_lcd();
 263         ppd_gpio_init();
 264
 265         return 0;
 266 }
 267
 268 /*
 269  * Do not overwrite the console
 270  * Use always serial for U-Boot console
 271  */
 272 int overwrite_console(void)
 273 {
 274         return 1;
 275 }
 276
 277 #define VPD_TYPE_INVALID 0x00
 278 #define VPD_BLOCK_NETWORK 0x20
 279 #define VPD_BLOCK_HWID 0x44
 280 #define VPD_PRODUCT_PPD 4
 281 #define VPD_HAS_MAC1 0x1
 282 #define VPD_MAC_ADDRESS_LENGTH 6
 283
 284 struct vpd_cache {
 285         u8 product_id;
 286         u8 has;
 287         unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
 288 };
 289
 290 /*
 291  * Extracts MAC and product information from the VPD.
 292  */
 293 static int vpd_callback(struct vpd_cache *userdata, u8 id, u8 version,
 294                         u8 type, size_t size, u8 const *data)
 295 {
 296         struct vpd_cache *vpd = userdata;
 297
 298         if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
 299             size >= 1) {
 300                 vpd->product_id = data[0];
 301
 302         } else if (id == VPD_BLOCK_NETWORK && version == 1 &&
 303                    type != VPD_TYPE_INVALID) {
 304                 if (size >= 6) {
 305                         vpd->has |= VPD_HAS_MAC1;
 306                         memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
 307                 }
 308         }
 309
 310         return 0;
 311 }
 312
 313 static void process_vpd(struct vpd_cache *vpd)
 314 {
 315         int fec_index = -1;
 316
 317         if (vpd->product_id == VPD_PRODUCT_PPD)
 318                 fec_index = 0;
 319
 320         if (fec_index >= 0 && (vpd->has & VPD_HAS_MAC1))
 321                 eth_env_set_enetaddr("ethaddr", vpd->mac1);
 322 }
 323
 324 int board_init(void)
 325 {
 326         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 327
 328         mxc_set_sata_internal_clock();
 329         setup_iomux_i2c();
 330
 331         setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 332
 333         return 0;
 334 }
 335
 336 int misc_init_r(void)
 337 {
 338         const char *cause;
 339
 340         /* We care about WDOG only, treating everything else as
 341          * a power-on-reset.
 342          */
 343         if (get_imx_reset_cause() & 0x0010)
 344                 cause = "WDOG";
 345         else
 346                 cause = "POR";
 347
 348         env_set("bootcause", cause);
 349
 350         return 0;
 351 }
 352
 353 int board_late_init(void)
 354 {
 355         int res;
 356         struct vpd_cache vpd;
 357
 358         memset(&vpd, 0, sizeof(vpd));
 359         res = read_vpd(&vpd, vpd_callback);
 360         if (!res)
 361                 process_vpd(&vpd);
 362         else
 363                 printf("Can't read VPD");
 364
 365         res = clock_1GHz();
 366         if (res != 0)
 367                 return res;
 368
 369         print_cpuinfo();
 370         hw_watchdog_init();
 371
 372         check_time();
 373
 374         return 0;
 375 }
 376
 377 int checkboard(void)
 378 {
 379         puts("Board: GE PPD\n");
 380
 381         return 0;
 382 }