board/gateworks/gw_ventana/gw_ventana.c

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * Author: Tim Harvey <tharvey@gateworks.com>
   5  *
   6  * SPDX-License-Identifier: GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <asm/arch/clock.h>
  11 #include <asm/arch/crm_regs.h>
  12 #include <asm/arch/iomux.h>
  13 #include <asm/arch/mx6-pins.h>
  14 #include <asm/arch/mxc_hdmi.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/gpio.h>
  17 #include <asm/imx-common/boot_mode.h>
  18 #include <asm/imx-common/sata.h>
  19 #include <asm/imx-common/spi.h>
  20 #include <asm/imx-common/video.h>
  21 #include <asm/io.h>
  22 #include <dm.h>
  23 #include <dm/platform_data/serial_mxc.h>
  24 #include <i2c.h>
  25 #include <fdt_support.h>
  26 #include <fsl_esdhc.h>
  27 #include <jffs2/load_kernel.h>
  28 #include <linux/ctype.h>
  29 #include <miiphy.h>
  30 #include <mtd_node.h>
  31 #include <netdev.h>
  32 #include <pci.h>
  33 #include <power/pmic.h>
  34 #include <power/ltc3676_pmic.h>
  35 #include <power/pfuze100_pmic.h>
  36 #include <fdt_support.h>
  37 #include <jffs2/load_kernel.h>
  38 #include <spi_flash.h>
  39
  40 #include "gsc.h"
  41 #include "common.h"
  42
  43 DECLARE_GLOBAL_DATA_PTR;
  44
  45
  46 /*
  47  * EEPROM board info struct populated by read_eeprom so that we only have to
  48  * read it once.
  49  */
  50 struct ventana_board_info ventana_info;
  51
  52 static int board_type;
  53
  54 /* MMC */
  55 static iomux_v3_cfg_t const usdhc3_pads[] = {
  56         IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  57         IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  58         IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  59         IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  60         IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  61         IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  62         /* CD */
  63         IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
  64 };
  65
  66 /* ENET */
  67 static iomux_v3_cfg_t const enet_pads[] = {
  68         IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  69         IOMUX_PADS(PAD_ENET_MDC__ENET_MDC    | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  70         IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  71         IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  72         IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  73         IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  74         IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  75         IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
  76                    MUX_PAD_CTRL(ENET_PAD_CTRL)),
  77         IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
  78                    MUX_PAD_CTRL(ENET_PAD_CTRL)),
  79         IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  80         IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  81         IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  82         IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  83         IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
  84         IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
  85                    MUX_PAD_CTRL(ENET_PAD_CTRL)),
  86         /* PHY nRST */
  87         IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG),
  88 };
  89
  90 /* NAND */
  91 static iomux_v3_cfg_t const nfc_pads[] = {
  92         IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
  93         IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
  94         IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B   | MUX_PAD_CTRL(NO_PAD_CTRL)),
  95         IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
  96         IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B   | MUX_PAD_CTRL(NO_PAD_CTRL)),
  97         IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B      | MUX_PAD_CTRL(NO_PAD_CTRL)),
  98         IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B      | MUX_PAD_CTRL(NO_PAD_CTRL)),
  99         IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 100         IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 101         IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 102         IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 103         IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 104         IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 105         IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 106         IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 107 };
 108
 109 #ifdef CONFIG_CMD_NAND
 110 static void setup_gpmi_nand(void)
 111 {
 112         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 113
 114         /* config gpmi nand iomux */
 115         SETUP_IOMUX_PADS(nfc_pads);
 116
 117         /* config gpmi and bch clock to 100 MHz */
 118         clrsetbits_le32(&mxc_ccm->cs2cdr,
 119                         MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
 120                         MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
 121                         MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
 122                         MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
 123                         MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
 124                         MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
 125
 126         /* enable gpmi and bch clock gating */
 127         setbits_le32(&mxc_ccm->CCGR4,
 128                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
 129                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
 130                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
 131                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
 132                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
 133
 134         /* enable apbh clock gating */
 135         setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
 136 }
 137 #endif
 138
 139 static void setup_iomux_enet(int gpio)
 140 {
 141         SETUP_IOMUX_PADS(enet_pads);
 142
 143         /* toggle PHY_RST# */
 144         gpio_request(gpio, "phy_rst#");
 145         gpio_direction_output(gpio, 0);
 146         mdelay(2);
 147         gpio_set_value(gpio, 1);
 148 }
 149
 150 #ifdef CONFIG_USB_EHCI_MX6
 151 static iomux_v3_cfg_t const usb_pads[] = {
 152         IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID   | DIO_PAD_CFG),
 153         IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | DIO_PAD_CFG),
 154         /* OTG PWR */
 155         IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22  | DIO_PAD_CFG),
 156 };
 157
 158 int board_ehci_hcd_init(int port)
 159 {
 160         int gpio;
 161
 162         SETUP_IOMUX_PADS(usb_pads);
 163
 164         /* Reset USB HUB */
 165         switch (board_type) {
 166         case GW53xx:
 167         case GW552x:
 168                 gpio = (IMX_GPIO_NR(1, 9));
 169                 break;
 170         case GW54proto:
 171         case GW54xx:
 172                 gpio = (IMX_GPIO_NR(1, 16));
 173                 break;
 174         default:
 175                 return 0;
 176         }
 177
 178         /* request and toggle hub rst */
 179         gpio_request(gpio, "usb_hub_rst#");
 180         gpio_direction_output(gpio, 0);
 181         mdelay(2);
 182         gpio_set_value(gpio, 1);
 183
 184         return 0;
 185 }
 186
 187 int board_ehci_power(int port, int on)
 188 {
 189         if (port)
 190                 return 0;
 191         gpio_set_value(GP_USB_OTG_PWR, on);
 192         return 0;
 193 }
 194 #endif /* CONFIG_USB_EHCI_MX6 */
 195
 196 #ifdef CONFIG_FSL_ESDHC
 197 static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
 198
 199 int board_mmc_getcd(struct mmc *mmc)
 200 {
 201         /* Card Detect */
 202         gpio_request(GP_SD3_CD, "sd_cd");
 203         gpio_direction_input(GP_SD3_CD);
 204         return !gpio_get_value(GP_SD3_CD);
 205 }
 206
 207 int board_mmc_init(bd_t *bis)
 208 {
 209         /* Only one USDHC controller on Ventana */
 210         SETUP_IOMUX_PADS(usdhc3_pads);
 211         usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 212         usdhc_cfg.max_bus_width = 4;
 213
 214         return fsl_esdhc_initialize(bis, &usdhc_cfg);
 215 }
 216 #endif /* CONFIG_FSL_ESDHC */
 217
 218 #ifdef CONFIG_MXC_SPI
 219 iomux_v3_cfg_t const ecspi1_pads[] = {
 220         /* SS1 */
 221         IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19  | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 222         IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 223         IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 224         IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 225 };
 226
 227 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 228 {
 229         return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
 230 }
 231
 232 static void setup_spi(void)
 233 {
 234         gpio_request(IMX_GPIO_NR(3, 19), "spi_cs");
 235         gpio_direction_output(IMX_GPIO_NR(3, 19), 1);
 236         SETUP_IOMUX_PADS(ecspi1_pads);
 237 }
 238 #endif
 239
 240 /* configure eth0 PHY board-specific LED behavior */
 241 int board_phy_config(struct phy_device *phydev)
 242 {
 243         unsigned short val;
 244
 245         /* Marvel 88E1510 */
 246         if (phydev->phy_id == 0x1410dd1) {
 247                 /*
 248                  * Page 3, Register 16: LED[2:0] Function Control Register
 249                  * LED[0] (SPD:Amber) R16_3.3:0 to 0111: on-GbE link
 250                  * LED[1] (LNK:Green) R16_3.7:4 to 0001: on-link, blink-activity
 251                  */
 252                 phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
 253                 val = phy_read(phydev, MDIO_DEVAD_NONE, 16);
 254                 val &= 0xff00;
 255                 val |= 0x0017;
 256                 phy_write(phydev, MDIO_DEVAD_NONE, 16, val);
 257                 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
 258         }
 259
 260         if (phydev->drv->config)
 261                 phydev->drv->config(phydev);
 262
 263         return 0;
 264 }
 265
 266 int board_eth_init(bd_t *bis)
 267 {
 268 #ifdef CONFIG_FEC_MXC
 269         if (board_type != GW551x && board_type != GW552x) {
 270                 setup_iomux_enet(GP_PHY_RST);
 271                 cpu_eth_init(bis);
 272         }
 273 #endif
 274
 275 #ifdef CONFIG_E1000
 276         e1000_initialize(bis);
 277 #endif
 278
 279 #ifdef CONFIG_CI_UDC
 280         /* For otg ethernet*/
 281         usb_eth_initialize(bis);
 282 #endif
 283
 284         /* default to the first detected enet dev */
 285         if (!getenv("ethprime")) {
 286                 struct eth_device *dev = eth_get_dev_by_index(0);
 287                 if (dev) {
 288                         setenv("ethprime", dev->name);
 289                         printf("set ethprime to %s\n", getenv("ethprime"));
 290                 }
 291         }
 292
 293         return 0;
 294 }
 295
 296 #if defined(CONFIG_VIDEO_IPUV3)
 297
 298 static void enable_hdmi(struct display_info_t const *dev)
 299 {
 300         imx_enable_hdmi_phy();
 301 }
 302
 303 static int detect_i2c(struct display_info_t const *dev)
 304 {
 305         return i2c_set_bus_num(dev->bus) == 0 &&
 306                 i2c_probe(dev->addr) == 0;
 307 }
 308
 309 static void enable_lvds(struct display_info_t const *dev)
 310 {
 311         struct iomuxc *iomux = (struct iomuxc *)
 312                                 IOMUXC_BASE_ADDR;
 313
 314         /* set CH0 data width to 24bit (IOMUXC_GPR2:5 0=18bit, 1=24bit) */
 315         u32 reg = readl(&iomux->gpr[2]);
 316         reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
 317         writel(reg, &iomux->gpr[2]);
 318
 319         /* Enable Backlight */
 320         gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio");
 321         gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
 322         gpio_request(IMX_GPIO_NR(1, 18), "bklt_en");
 323         SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG);
 324         gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
 325 }
 326
 327 struct display_info_t const displays[] = {{
 328         /* HDMI Output */
 329         .bus    = -1,
 330         .addr   = 0,
 331         .pixfmt = IPU_PIX_FMT_RGB24,
 332         .detect = detect_hdmi,
 333         .enable = enable_hdmi,
 334         .mode   = {
 335                 .name           = "HDMI",
 336                 .refresh        = 60,
 337                 .xres           = 1024,
 338                 .yres           = 768,
 339                 .pixclock       = 15385,
 340                 .left_margin    = 220,
 341                 .right_margin   = 40,
 342                 .upper_margin   = 21,
 343                 .lower_margin   = 7,
 344                 .hsync_len      = 60,
 345                 .vsync_len      = 10,
 346                 .sync           = FB_SYNC_EXT,
 347                 .vmode          = FB_VMODE_NONINTERLACED
 348 } }, {
 349         /* Freescale MXC-LVDS1: HannStar HSD100PXN1-A00 w/ egalx_ts cont */
 350         .bus    = 2,
 351         .addr   = 0x4,
 352         .pixfmt = IPU_PIX_FMT_LVDS666,
 353         .detect = detect_i2c,
 354         .enable = enable_lvds,
 355         .mode   = {
 356                 .name           = "Hannstar-XGA",
 357                 .refresh        = 60,
 358                 .xres           = 1024,
 359                 .yres           = 768,
 360                 .pixclock       = 15385,
 361                 .left_margin    = 220,
 362                 .right_margin   = 40,
 363                 .upper_margin   = 21,
 364                 .lower_margin   = 7,
 365                 .hsync_len      = 60,
 366                 .vsync_len      = 10,
 367                 .sync           = FB_SYNC_EXT,
 368                 .vmode          = FB_VMODE_NONINTERLACED
 369 } }, {
 370         /* DLC700JMG-T-4 */
 371         .bus    = 0,
 372         .addr   = 0,
 373         .detect = NULL,
 374         .enable = enable_lvds,
 375         .pixfmt = IPU_PIX_FMT_LVDS666,
 376         .mode   = {
 377                 .name           = "DLC700JMGT4",
 378                 .refresh        = 60,
 379                 .xres           = 1024,         /* 1024x600active pixels */
 380                 .yres           = 600,
 381                 .pixclock       = 15385,        /* 64MHz */
 382                 .left_margin    = 220,
 383                 .right_margin   = 40,
 384                 .upper_margin   = 21,
 385                 .lower_margin   = 7,
 386                 .hsync_len      = 60,
 387                 .vsync_len      = 10,
 388                 .sync           = FB_SYNC_EXT,
 389                 .vmode          = FB_VMODE_NONINTERLACED
 390 } }, {
 391         /* DLC800FIG-T-3 */
 392         .bus    = 0,
 393         .addr   = 0,
 394         .detect = NULL,
 395         .enable = enable_lvds,
 396         .pixfmt = IPU_PIX_FMT_LVDS666,
 397         .mode   = {
 398                 .name           = "DLC800FIGT3",
 399                 .refresh        = 60,
 400                 .xres           = 1024,         /* 1024x768 active pixels */
 401                 .yres           = 768,
 402                 .pixclock       = 15385,        /* 64MHz */
 403                 .left_margin    = 220,
 404                 .right_margin   = 40,
 405                 .upper_margin   = 21,
 406                 .lower_margin   = 7,
 407                 .hsync_len      = 60,
 408                 .vsync_len      = 10,
 409                 .sync           = FB_SYNC_EXT,
 410                 .vmode          = FB_VMODE_NONINTERLACED
 411 } } };
 412 size_t display_count = ARRAY_SIZE(displays);
 413
 414 static void setup_display(void)
 415 {
 416         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 417         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 418         int reg;
 419
 420         enable_ipu_clock();
 421         imx_setup_hdmi();
 422         /* Turn on LDB0,IPU,IPU DI0 clocks */
 423         reg = __raw_readl(&mxc_ccm->CCGR3);
 424         reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
 425         writel(reg, &mxc_ccm->CCGR3);
 426
 427         /* set LDB0, LDB1 clk select to 011/011 */
 428         reg = readl(&mxc_ccm->cs2cdr);
 429         reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 430                  |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 431         reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
 432               |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
 433         writel(reg, &mxc_ccm->cs2cdr);
 434
 435         reg = readl(&mxc_ccm->cscmr2);
 436         reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
 437         writel(reg, &mxc_ccm->cscmr2);
 438
 439         reg = readl(&mxc_ccm->chsccdr);
 440         reg |= (CHSCCDR_CLK_SEL_LDB_DI0
 441                 <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
 442         writel(reg, &mxc_ccm->chsccdr);
 443
 444         reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 445              |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
 446              |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
 447              |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
 448              |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
 449              |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 450              |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
 451              |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 452              |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 453         writel(reg, &iomux->gpr[2]);
 454
 455         reg = readl(&iomux->gpr[3]);
 456         reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
 457             | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 458                <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 459         writel(reg, &iomux->gpr[3]);
 460
 461         /* LVDS Backlight GPIO on LVDS connector - output low */
 462         SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
 463         gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
 464 }
 465 #endif /* CONFIG_VIDEO_IPUV3 */
 466
 467 /* setup board specific PMIC */
 468 int power_init_board(void)
 469 {
 470         setup_pmic();
 471         return 0;
 472 }
 473
 474 #if defined(CONFIG_CMD_PCI)
 475 int imx6_pcie_toggle_reset(void)
 476 {
 477         if (board_type < GW_UNKNOWN) {
 478                 uint pin = gpio_cfg[board_type].pcie_rst;
 479                 gpio_request(pin, "pci_rst#");
 480                 gpio_direction_output(pin, 0);
 481                 mdelay(50);
 482                 gpio_direction_output(pin, 1);
 483         }
 484         return 0;
 485 }
 486
 487 /*
 488  * Most Ventana boards have a PLX PEX860x PCIe switch onboard and use its
 489  * GPIO's as PERST# signals for its downstream ports - configure the GPIO's
 490  * properly and assert reset for 100ms.
 491  */
 492 void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
 493                          unsigned short vendor, unsigned short device,
 494                          unsigned short class)
 495 {
 496         u32 dw;
 497
 498         debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__,
 499               PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device);
 500         if (vendor == PCI_VENDOR_ID_PLX &&
 501             (device & 0xfff0) == 0x8600 &&
 502             PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) {
 503                 debug("configuring PLX 860X downstream PERST#\n");
 504                 pci_hose_read_config_dword(hose, dev, 0x62c, &dw);
 505                 dw |= 0xaaa8; /* GPIO1-7 outputs */
 506                 pci_hose_write_config_dword(hose, dev, 0x62c, dw);
 507
 508                 pci_hose_read_config_dword(hose, dev, 0x644, &dw);
 509                 dw |= 0xfe;   /* GPIO1-7 output high */
 510                 pci_hose_write_config_dword(hose, dev, 0x644, dw);
 511
 512                 mdelay(100);
 513         }
 514 }
 515 #endif /* CONFIG_CMD_PCI */
 516
 517 #ifdef CONFIG_SERIAL_TAG
 518 /*
 519  * called when setting up ATAGS before booting kernel
 520  * populate serialnum from the following (in order of priority):
 521  *   serial# env var
 522  *   eeprom
 523  */
 524 void get_board_serial(struct tag_serialnr *serialnr)
 525 {
 526         char *serial = getenv("serial#");
 527
 528         if (serial) {
 529                 serialnr->high = 0;
 530                 serialnr->low = simple_strtoul(serial, NULL, 10);
 531         } else if (ventana_info.model[0]) {
 532                 serialnr->high = 0;
 533                 serialnr->low = ventana_info.serial;
 534         } else {
 535                 serialnr->high = 0;
 536                 serialnr->low = 0;
 537         }
 538 }
 539 #endif
 540
 541 /*
 542  * Board Support
 543  */
 544
 545 int board_early_init_f(void)
 546 {
 547         setup_iomux_uart();
 548
 549 #if defined(CONFIG_VIDEO_IPUV3)
 550         setup_display();
 551 #endif
 552         return 0;
 553 }
 554
 555 int dram_init(void)
 556 {
 557         gd->ram_size = imx_ddr_size();
 558         return 0;
 559 }
 560
 561 int board_init(void)
 562 {
 563         struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
 564
 565         clrsetbits_le32(&iomuxc_regs->gpr[1],
 566                         IOMUXC_GPR1_OTG_ID_MASK,
 567                         IOMUXC_GPR1_OTG_ID_GPIO1);
 568
 569         /* address of linux boot parameters */
 570         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 571
 572 #ifdef CONFIG_CMD_NAND
 573         setup_gpmi_nand();
 574 #endif
 575 #ifdef CONFIG_MXC_SPI
 576         setup_spi();
 577 #endif
 578         setup_ventana_i2c();
 579
 580 #ifdef CONFIG_CMD_SATA
 581         setup_sata();
 582 #endif
 583         /* read Gateworks EEPROM into global struct (used later) */
 584         board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
 585
 586         setup_iomux_gpio(board_type, &ventana_info);
 587
 588         return 0;
 589 }
 590
 591 #if defined(CONFIG_DISPLAY_BOARDINFO_LATE)
 592 /*
 593  * called during late init (after relocation and after board_init())
 594  * by virtue of CONFIG_DISPLAY_BOARDINFO_LATE as we needed i2c initialized and
 595  * EEPROM read.
 596  */
 597 int checkboard(void)
 598 {
 599         struct ventana_board_info *info = &ventana_info;
 600         unsigned char buf[4];
 601         const char *p;
 602         int quiet; /* Quiet or minimal output mode */
 603
 604         quiet = 0;
 605         p = getenv("quiet");
 606         if (p)
 607                 quiet = simple_strtol(p, NULL, 10);
 608         else
 609                 setenv("quiet", "0");
 610
 611         puts("\nGateworks Corporation Copyright 2014\n");
 612         if (info->model[0]) {
 613                 printf("Model: %s\n", info->model);
 614                 printf("MFGDate: %02x-%02x-%02x%02x\n",
 615                        info->mfgdate[0], info->mfgdate[1],
 616                        info->mfgdate[2], info->mfgdate[3]);
 617                 printf("Serial:%d\n", info->serial);
 618         } else {
 619                 puts("Invalid EEPROM - board will not function fully\n");
 620         }
 621         if (quiet)
 622                 return 0;
 623
 624         /* Display GSC firmware revision/CRC/status */
 625         gsc_info(0);
 626
 627         /* Display RTC */
 628         if (!gsc_i2c_read(GSC_RTC_ADDR, 0x00, 1, buf, 4)) {
 629                 printf("RTC:   %d\n",
 630                        buf[0] | buf[1]<<8 | buf[2]<<16 | buf[3]<<24);
 631         }
 632
 633         return 0;
 634 }
 635 #endif
 636
 637 #ifdef CONFIG_CMD_BMODE
 638 /*
 639  * BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4
 640  * see Table 8-11 and Table 5-9
 641  *  BOOT_CFG1[7] = 1 (boot from NAND)
 642  *  BOOT_CFG1[5] = 0 - raw NAND
 643  *  BOOT_CFG1[4] = 0 - default pad settings
 644  *  BOOT_CFG1[3:2] = 00 - devices = 1
 645  *  BOOT_CFG1[1:0] = 00 - Row Address Cycles = 3
 646  *  BOOT_CFG2[4:3] = 00 - Boot Search Count = 2
 647  *  BOOT_CFG2[2:1] = 01 - Pages In Block = 64
 648  *  BOOT_CFG2[0] = 0 - Reset time 12ms
 649  */
 650 static const struct boot_mode board_boot_modes[] = {
 651         /* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
 652         { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
 653         { NULL, 0 },
 654 };
 655 #endif
 656
 657 /* late init */
 658 int misc_init_r(void)
 659 {
 660         struct ventana_board_info *info = &ventana_info;
 661
 662         /* set env vars based on EEPROM data */
 663         if (ventana_info.model[0]) {
 664                 char str[16], fdt[36];
 665                 char *p;
 666                 const char *cputype = "";
 667                 int i;
 668
 669                 /*
 670                  * FDT name will be prefixed with CPU type.  Three versions
 671                  * will be created each increasingly generic and bootloader
 672                  * env scripts will try loading each from most specific to
 673                  * least.
 674                  */
 675                 if (is_cpu_type(MXC_CPU_MX6Q) ||
 676                     is_cpu_type(MXC_CPU_MX6D))
 677                         cputype = "imx6q";
 678                 else if (is_cpu_type(MXC_CPU_MX6DL) ||
 679                          is_cpu_type(MXC_CPU_MX6SOLO))
 680                         cputype = "imx6dl";
 681                 setenv("soctype", cputype);
 682                 if (8 << (ventana_info.nand_flash_size-1) >= 2048)
 683                         setenv("flash_layout", "large");
 684                 else
 685                         setenv("flash_layout", "normal");
 686                 memset(str, 0, sizeof(str));
 687                 for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
 688                         str[i] = tolower(info->model[i]);
 689                 setenv("model", str);
 690                 if (!getenv("fdt_file")) {
 691                         sprintf(fdt, "%s-%s.dtb", cputype, str);
 692                         setenv("fdt_file", fdt);
 693                 }
 694                 p = strchr(str, '-');
 695                 if (p) {
 696                         *p++ = 0;
 697
 698                         setenv("model_base", str);
 699                         sprintf(fdt, "%s-%s.dtb", cputype, str);
 700                         setenv("fdt_file1", fdt);
 701                         if (board_type != GW551x && board_type != GW552x)
 702                                 str[4] = 'x';
 703                         str[5] = 'x';
 704                         str[6] = 0;
 705                         sprintf(fdt, "%s-%s.dtb", cputype, str);
 706                         setenv("fdt_file2", fdt);
 707                 }
 708
 709                 /* initialize env from EEPROM */
 710                 if (test_bit(EECONFIG_ETH0, info->config) &&
 711                     !getenv("ethaddr")) {
 712                         eth_setenv_enetaddr("ethaddr", info->mac0);
 713                 }
 714                 if (test_bit(EECONFIG_ETH1, info->config) &&
 715                     !getenv("eth1addr")) {
 716                         eth_setenv_enetaddr("eth1addr", info->mac1);
 717                 }
 718
 719                 /* board serial-number */
 720                 sprintf(str, "%6d", info->serial);
 721                 setenv("serial#", str);
 722
 723                 /* memory MB */
 724                 sprintf(str, "%d", (int) (gd->ram_size >> 20));
 725                 setenv("mem_mb", str);
 726         }
 727
 728
 729         /* setup baseboard specific GPIO based on board and env */
 730         setup_board_gpio(board_type, info);
 731
 732 #ifdef CONFIG_CMD_BMODE
 733         add_board_boot_modes(board_boot_modes);
 734 #endif
 735
 736         /* disable boot watchdog */
 737         gsc_boot_wd_disable();
 738
 739         return 0;
 740 }
 741
 742 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 743
 744 static int ft_sethdmiinfmt(void *blob, char *mode)
 745 {
 746         int off;
 747
 748         if (!mode)
 749                 return -EINVAL;
 750
 751         off = fdt_node_offset_by_compatible(blob, -1, "nxp,tda1997x");
 752         if (off < 0)
 753                 return off;
 754
 755         if (0 == strcasecmp(mode, "yuv422bt656")) {
 756                 u8 cfg[] = { 0x00, 0x00, 0x00, 0x82, 0x81, 0x00,
 757                              0x00, 0x00, 0x00 };
 758                 mode = "422_ccir";
 759                 fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
 760                 fdt_setprop_u32(blob, off, "vidout_trc", 1);
 761                 fdt_setprop_u32(blob, off, "vidout_blc", 1);
 762                 fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
 763                 printf("   set HDMI input mode to %s\n", mode);
 764         } else if (0 == strcasecmp(mode, "yuv422smp")) {
 765                 u8 cfg[] = { 0x00, 0x00, 0x00, 0x88, 0x87, 0x00,
 766                              0x82, 0x81, 0x00 };
 767                 mode = "422_smp";
 768                 fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
 769                 fdt_setprop_u32(blob, off, "vidout_trc", 0);
 770                 fdt_setprop_u32(blob, off, "vidout_blc", 0);
 771                 fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
 772                 printf("   set HDMI input mode to %s\n", mode);
 773         } else {
 774                 return -EINVAL;
 775         }
 776
 777         return 0;
 778 }
 779
 780 /*
 781  * called prior to booting kernel or by 'fdt boardsetup' command
 782  *
 783  * unless 'fdt_noauto' env var is set we will update the following in the DTB:
 784  *  - mtd partitions based on mtdparts/mtdids env
 785  *  - system-serial (board serial num from EEPROM)
 786  *  - board (full model from EEPROM)
 787  *  - peripherals removed from DTB if not loaded on board (per EEPROM config)
 788  */
 789 int ft_board_setup(void *blob, bd_t *bd)
 790 {
 791         struct ventana_board_info *info = &ventana_info;
 792         struct ventana_eeprom_config *cfg;
 793         struct node_info nodes[] = {
 794                 { "sst,w25q256",          MTD_DEV_TYPE_NOR, },  /* SPI flash */
 795                 { "fsl,imx6q-gpmi-nand",  MTD_DEV_TYPE_NAND, }, /* NAND flash */
 796         };
 797         const char *model = getenv("model");
 798         const char *display = getenv("display");
 799         int i;
 800         char rev = 0;
 801
 802         /* determine board revision */
 803         for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
 804                 if (ventana_info.model[i] >= 'A') {
 805                         rev = ventana_info.model[i];
 806                         break;
 807                 }
 808         }
 809
 810         if (getenv("fdt_noauto")) {
 811                 puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
 812                 return 0;
 813         }
 814
 815         if (test_bit(EECONFIG_NAND, info->config)) {
 816                 /* Update partition nodes using info from mtdparts env var */
 817                 puts("   Updating MTD partitions...\n");
 818                 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
 819         }
 820
 821         /* Update display timings from display env var */
 822         if (display) {
 823                 if (fdt_fixup_display(blob, fdt_get_alias(blob, "lvds0"),
 824                                       display) >= 0)
 825                         printf("   Set display timings for %s...\n", display);
 826         }
 827
 828         printf("   Adjusting FDT per EEPROM for %s...\n", model);
 829
 830         /* board serial number */
 831         fdt_setprop(blob, 0, "system-serial", getenv("serial#"),
 832                     strlen(getenv("serial#")) + 1);
 833
 834         /* board (model contains model from device-tree) */
 835         fdt_setprop(blob, 0, "board", info->model,
 836                     strlen((const char *)info->model) + 1);
 837
 838         /* set desired digital video capture format */
 839         ft_sethdmiinfmt(blob, getenv("hdmiinfmt"));
 840
 841         /*
 842          * disable serial2 node for GW54xx for compatibility with older
 843          * 3.10.x kernel that improperly had this node enabled in the DT
 844          */
 845         if (board_type == GW54xx) {
 846                 i = fdt_path_offset(blob,
 847                                     "/soc/aips-bus@02100000/serial@021ec000");
 848                 if (i)
 849                         fdt_del_node(blob, i);
 850         }
 851
 852         /*
 853          * disable wdog1/wdog2 nodes for GW51xx below revC to work around
 854          * errata causing wdog timer to be unreliable.
 855          */
 856         if (board_type == GW51xx && rev >= 'A' && rev < 'C') {
 857                 i = fdt_path_offset(blob,
 858                                     "/soc/aips-bus@02000000/wdog@020bc000");
 859                 if (i)
 860                         fdt_status_disabled(blob, i);
 861         }
 862
 863         /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */
 864         else if (board_type == GW52xx && info->model[4] == '2') {
 865                 u32 handle = 0;
 866                 u32 *range = NULL;
 867
 868                 i = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
 869                 if (i)
 870                         range = (u32 *)fdt_getprop(blob, i, "reset-gpio",
 871                                                    NULL);
 872
 873                 if (range) {
 874                         i = fdt_path_offset(blob,
 875                                             "/soc/aips-bus@02000000/gpio@020a4000");
 876                         if (i)
 877                                 handle = fdt_get_phandle(blob, i);
 878                         if (handle) {
 879                                 range[0] = cpu_to_fdt32(handle);
 880                                 range[1] = cpu_to_fdt32(23);
 881                         }
 882                 }
 883         }
 884
 885         /*
 886          * isolate CSI0_DATA_EN for GW551x below revB to work around
 887          * errata causing non functional digital video in (it is not hooked up)
 888          */
 889         else if (board_type == GW551x && rev == 'A') {
 890                 u32 *range = NULL;
 891                 int len;
 892                 const u32 *handle = NULL;
 893
 894                 i = fdt_node_offset_by_compatible(blob, -1,
 895                                                   "fsl,imx-tda1997x-video");
 896                 if (i)
 897                         handle = fdt_getprop(blob, i, "pinctrl-0", NULL);
 898                 if (handle)
 899                         i = fdt_node_offset_by_phandle(blob,
 900                                                        fdt32_to_cpu(*handle));
 901                 if (i)
 902                         range = (u32 *)fdt_getprop(blob, i, "fsl,pins", &len);
 903                 if (range) {
 904                         len /= sizeof(u32);
 905                         for (i = 0; i < len; i += 6) {
 906                                 u32 mux_reg = fdt32_to_cpu(range[i+0]);
 907                                 u32 conf_reg = fdt32_to_cpu(range[i+1]);
 908                                 /* mux PAD_CSI0_DATA_EN to GPIO */
 909                                 if (is_cpu_type(MXC_CPU_MX6Q) &&
 910                                     mux_reg == 0x260 && conf_reg == 0x630)
 911                                         range[i+3] = cpu_to_fdt32(0x5);
 912                                 else if (!is_cpu_type(MXC_CPU_MX6Q) &&
 913                                     mux_reg == 0x08c && conf_reg == 0x3a0)
 914                                         range[i+3] = cpu_to_fdt32(0x5);
 915                         }
 916                         fdt_setprop_inplace(blob, i, "fsl,pins", range, len);
 917                 }
 918
 919                 /* set BT656 video format */
 920                 ft_sethdmiinfmt(blob, "yuv422bt656");
 921         }
 922
 923         /*
 924          * Peripheral Config:
 925          *  remove nodes by alias path if EEPROM config tells us the
 926          *  peripheral is not loaded on the board.
 927          */
 928         if (getenv("fdt_noconfig")) {
 929                 puts("   Skiping periperhal config (fdt_noconfig defined)\n");
 930                 return 0;
 931         }
 932         cfg = econfig;
 933         while (cfg->name) {
 934                 if (!test_bit(cfg->bit, info->config)) {
 935                         fdt_del_node_and_alias(blob, cfg->dtalias ?
 936                                                cfg->dtalias : cfg->name);
 937                 }
 938                 cfg++;
 939         }
 940
 941         return 0;
 942 }
 943 #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
 944
 945 static struct mxc_serial_platdata ventana_mxc_serial_plat = {
 946         .reg = (struct mxc_uart *)UART2_BASE,
 947 };
 948
 949 U_BOOT_DEVICE(ventana_serial) = {
 950         .name   = "serial_mxc",
 951         .platdata = &ventana_mxc_serial_plat,
 952 };