2 * Copyright (C) 2014 Gateworks Corporation
3 * Author: Tim Harvey <tharvey@gateworks.com>
5 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/bitops.h>
15 #include "ventana_eeprom.h"
17 /* read ventana EEPROM, check for validity, and return baseboard type */
19 read_eeprom(int bus, struct ventana_board_info *info)
25 unsigned char *buf = (unsigned char *)info;
27 memset(info, 0, sizeof(*info));
30 * On a board with a missing/depleted backup battery for GSC, the
31 * board may be ready to probe the GSC before its firmware is
32 * running. We will wait here indefinately for the GSC/EEPROM.
35 if (0 == i2c_set_bus_num(bus) &&
36 0 == i2c_probe(GSC_EEPROM_ADDR))
41 /* read eeprom config section */
42 if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
43 puts("EEPROM: Failed to read EEPROM\n");
48 if (info->model[0] != 'G' || info->model[1] != 'W') {
49 puts("EEPROM: Invalid Model in EEPROM\n");
53 /* validate checksum */
54 for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
56 if ((info->chksum[0] != chksum>>8) ||
57 (info->chksum[1] != (chksum&0xff))) {
58 puts("EEPROM: Failed EEPROM checksum\n");
62 /* original GW5400-A prototype */
63 baseboard = info->model[3];
64 if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
69 case '0': /* original GW5400-A prototype */
85 if (info->model[4] == '1') {
88 } else if (info->model[4] == '2') {
91 } else if (info->model[4] == '3') {
97 if (info->model[4] == '0' && info->model[5] == '4')
104 /* list of config bits that the bootloader will remove from dtb if not set */
105 struct ventana_eeprom_config econfig[] = {
106 { "eth0", "ethernet0", EECONFIG_ETH0 },
107 { "usb0", NULL, EECONFIG_USB0 },
108 { "usb1", NULL, EECONFIG_USB1 },
109 { "mmc0", NULL, EECONFIG_SD0 },
110 { "mmc1", NULL, EECONFIG_SD1 },
111 { "mmc2", NULL, EECONFIG_SD2 },
112 { "mmc3", NULL, EECONFIG_SD3 },
116 #ifdef CONFIG_CMD_EECONFIG
117 static struct ventana_eeprom_config *get_config(const char *name)
119 struct ventana_eeprom_config *cfg = econfig;
122 if (0 == strcmp(name, cfg->name))
129 static u8 econfig_bytes[sizeof(ventana_info.config)];
130 static int econfig_init = -1;
132 int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
134 struct ventana_eeprom_config *cfg;
135 struct ventana_board_info *info = &ventana_info;
139 return CMD_RET_USAGE;
142 if (econfig_init != 1) {
143 memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
148 if ((strncmp(argv[1], "list", 4) == 0)) {
151 printf("%s: %d\n", cfg->name,
152 test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
158 else if ((strncmp(argv[1], "save", 4) == 0)) {
159 unsigned char *buf = (unsigned char *)info;
162 /* calculate new checksum */
163 memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
164 for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
166 debug("old chksum:0x%04x\n",
167 (info->chksum[0] << 8) | info->chksum[1]);
168 debug("new chksum:0x%04x\n", chksum);
169 info->chksum[0] = chksum >> 8;
170 info->chksum[1] = chksum & 0xff;
172 /* write new config data */
173 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
174 1, econfig_bytes, sizeof(econfig_bytes))) {
175 printf("EEPROM: Failed updating config\n");
176 return CMD_RET_FAILURE;
179 /* write new config data */
180 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
181 1, info->chksum, 2)) {
182 printf("EEPROM: Failed updating checksum\n");
183 return CMD_RET_FAILURE;
186 printf("Config saved to EEPROM\n");
190 else if (argc == 2) {
191 cfg = get_config(argv[1]);
193 printf("%s: %d\n", cfg->name,
194 test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
196 printf("invalid config: %s\n", argv[1]);
197 return CMD_RET_FAILURE;
202 else if (argc == 3) {
203 cfg = get_config(argv[1]);
205 if (simple_strtol(argv[2], NULL, 10)) {
206 test_and_set_bit(cfg->bit, econfig_bytes);
207 printf("Enabled %s\n", cfg->name);
209 test_and_clear_bit(cfg->bit, econfig_bytes);
210 printf("Disabled %s\n", cfg->name);
213 printf("invalid config: %s\n", argv[1]);
214 return CMD_RET_FAILURE;
219 return CMD_RET_USAGE;
221 return CMD_RET_SUCCESS;
225 econfig, 3, 0, do_econfig,
226 "EEPROM configuration",
227 "list - list config\n"
228 "save - save config to EEPROM\n"
229 "<name> - get config 'name'\n"
230 "<name> [0|1] - set config 'name' to value\n"
233 #endif /* CONFIG_CMD_EECONFIG */