board/freescale/p1010rdb/p1010rdb.c

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #include <common.h>
  24 #include <asm/processor.h>
  25 #include <asm/mmu.h>
  26 #include <asm/cache.h>
  27 #include <asm/immap_85xx.h>
  28 #include <asm/io.h>
  29 #include <miiphy.h>
  30 #include <libfdt.h>
  31 #include <fdt_support.h>
  32 #include <fsl_mdio.h>
  33 #include <tsec.h>
  34 #include <mmc.h>
  35 #include <netdev.h>
  36 #include <pci.h>
  37 #include <asm/fsl_serdes.h>
  38 #include <asm/fsl_ifc.h>
  39 #include <asm/fsl_pci.h>
  40
  41 #ifndef CONFIG_SDCARD
  42 #include <hwconfig.h>
  43 #endif
  44
  45 DECLARE_GLOBAL_DATA_PTR;
  46
  47 #define GPIO4_PCIE_RESET_SET            0x08000000
  48 #define MUX_CPLD_CAN_UART               0x00
  49 #define MUX_CPLD_TDM                    0x01
  50 #define MUX_CPLD_SPICS0_FLASH           0x00
  51 #define MUX_CPLD_SPICS0_SLIC            0x02
  52
  53 #ifndef CONFIG_SDCARD
  54 struct cpld_data {
  55         u8 cpld_ver; /* cpld revision */
  56         u8 pcba_ver; /* pcb revision number */
  57         u8 twindie_ddr3;
  58         u8 res1[6];
  59         u8 bank_sel; /* NOR Flash bank */
  60         u8 res2[5];
  61         u8 usb2_sel;
  62         u8 res3[1];
  63         u8 porsw_sel;
  64         u8 tdm_can_sel;
  65         u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
  66         u8 por0; /* POR Options */
  67         u8 por1; /* POR Options */
  68         u8 por2; /* POR Options */
  69         u8 por3; /* POR Options */
  70 };
  71
  72 void cpld_show(void)
  73 {
  74         struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
  75
  76         printf("CPLD: V%x.%x PCBA: V%x.0\n",
  77                 in_8(&cpld_data->cpld_ver) & 0xF0,
  78                 in_8(&cpld_data->cpld_ver) & 0x0F,
  79                 in_8(&cpld_data->pcba_ver) & 0x0F);
  80
  81 #ifdef CONFIG_DEBUG
  82         printf("twindie_ddr =%x\n",
  83                 in_8(&cpld_data->twindie_ddr3));
  84         printf("bank_sel =%x\n",
  85                 in_8(&cpld_data->bank_sel));
  86         printf("usb2_sel =%x\n",
  87                 in_8(&cpld_data->usb2_sel));
  88         printf("porsw_sel =%x\n",
  89                 in_8(&cpld_data->porsw_sel));
  90         printf("tdm_can_sel =%x\n",
  91                 in_8(&cpld_data->tdm_can_sel));
  92         printf("tdm_can_sel =%x\n",
  93                 in_8(&cpld_data->tdm_can_sel));
  94         printf("spi_cs0_sel =%x\n",
  95                 in_8(&cpld_data->spi_cs0_sel));
  96         printf("bcsr0 =%x\n",
  97                 in_8(&cpld_data->bcsr0));
  98         printf("bcsr1 =%x\n",
  99                 in_8(&cpld_data->bcsr1));
 100         printf("bcsr2 =%x\n",
 101                 in_8(&cpld_data->bcsr2));
 102         printf("bcsr3 =%x\n",
 103                 in_8(&cpld_data->bcsr3));
 104 #endif
 105 }
 106 #endif
 107
 108 int board_early_init_f(void)
 109 {
 110         ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 111 #ifndef CONFIG_SDCARD
 112         struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
 113
 114         /* Clock configuration to access CPLD using IFC(GPCM) */
 115         setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
 116 #endif
 117         /*
 118         * Reset PCIe slots via GPIO4
 119         */
 120         setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
 121         setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
 122
 123         return 0;
 124 }
 125
 126 int board_early_init_r(void)
 127 {
 128 #ifndef CONFIG_SDCARD
 129         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 130         const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
 131
 132         /*
 133          * Remap Boot flash region to caching-inhibited
 134          * so that flash can be erased properly.
 135          */
 136
 137         /* Flush d-cache and invalidate i-cache of any FLASH data */
 138         flush_dcache();
 139         invalidate_icache();
 140
 141         /* invalidate existing TLB entry for flash */
 142         disable_tlb(flash_esel);
 143
 144         set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
 145                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 146                         0, flash_esel, BOOKE_PAGESZ_16M, 1);
 147
 148         set_tlb(1, flashbase + 0x1000000,
 149                         CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
 150                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 151                         0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
 152 #endif
 153         return 0;
 154 }
 155
 156 #ifdef CONFIG_PCI
 157 void pci_init_board(void)
 158 {
 159         fsl_pcie_init_board(0);
 160 }
 161 #endif /* ifdef CONFIG_PCI */
 162
 163 int checkboard(void)
 164 {
 165         struct cpu_type *cpu;
 166
 167         cpu = gd->cpu;
 168         printf("Board: %sRDB ", cpu->name);
 169 #ifdef CONFIG_PHYS_64BIT
 170         puts("(36-bit addrmap)");
 171 #endif
 172         puts("\n");
 173
 174         return 0;
 175 }
 176
 177 #ifdef CONFIG_TSEC_ENET
 178 int board_eth_init(bd_t *bis)
 179 {
 180         struct fsl_pq_mdio_info mdio_info;
 181         struct tsec_info_struct tsec_info[4];
 182         struct cpu_type *cpu;
 183         int num = 0;
 184
 185         cpu = gd->cpu;
 186
 187 #ifdef CONFIG_TSEC1
 188         SET_STD_TSEC_INFO(tsec_info[num], 1);
 189         num++;
 190 #endif
 191 #ifdef CONFIG_TSEC2
 192         SET_STD_TSEC_INFO(tsec_info[num], 2);
 193         num++;
 194 #endif
 195 #ifdef CONFIG_TSEC3
 196         /* P1014 and it's derivatives do not support eTSEC3 */
 197         if (cpu->soc_ver != SVR_P1014 && cpu->soc_ver != SVR_P1014_E) {
 198                 SET_STD_TSEC_INFO(tsec_info[num], 3);
 199                 num++;
 200         }
 201 #endif
 202         if (!num) {
 203                 printf("No TSECs initialized\n");
 204                 return 0;
 205         }
 206
 207         mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
 208         mdio_info.name = DEFAULT_MII_NAME;
 209
 210         fsl_pq_mdio_init(bis, &mdio_info);
 211
 212         tsec_eth_init(bis, tsec_info, num);
 213
 214         return pci_eth_init(bis);
 215 }
 216 #endif
 217
 218 #if defined(CONFIG_OF_BOARD_SETUP)
 219 void fdt_del_flexcan(void *blob)
 220 {
 221         int nodeoff = 0;
 222
 223         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 224                                 "fsl,flexcan-v1.0")) >= 0) {
 225                 fdt_del_node(blob, nodeoff);
 226         }
 227 }
 228
 229 void fdt_del_spi_flash(void *blob)
 230 {
 231         int nodeoff = 0;
 232
 233         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 234                                 "spansion,s25sl12801")) >= 0) {
 235                 fdt_del_node(blob, nodeoff);
 236         }
 237 }
 238
 239 void fdt_del_spi_slic(void *blob)
 240 {
 241         int nodeoff = 0;
 242
 243         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 244                                 "zarlink,le88266")) >= 0) {
 245                 fdt_del_node(blob, nodeoff);
 246         }
 247 }
 248
 249 void fdt_del_tdm(void *blob)
 250 {
 251         int nodeoff = 0;
 252
 253         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 254                                 "fsl,starlite-tdm")) >= 0) {
 255                 fdt_del_node(blob, nodeoff);
 256         }
 257 }
 258
 259 void ft_board_setup(void *blob, bd_t *bd)
 260 {
 261         phys_addr_t base;
 262         phys_size_t size;
 263         struct cpu_type *cpu;
 264
 265         cpu = gd->cpu;
 266
 267         ft_cpu_setup(blob, bd);
 268
 269         base = getenv_bootm_low();
 270         size = getenv_bootm_size();
 271
 272 #if defined(CONFIG_PCI)
 273         FT_FSL_PCI_SETUP;
 274 #endif
 275
 276         fdt_fixup_memory(blob, (u64)base, (u64)size);
 277
 278 #if defined(CONFIG_HAS_FSL_DR_USB)
 279         fdt_fixup_dr_usb(blob, bd);
 280 #endif
 281
 282        /* P1014 and it's derivatives don't support CAN and eTSEC3 */
 283         if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) {
 284                 fdt_del_flexcan(blob);
 285                 fdt_del_node_and_alias(blob, "ethernet2");
 286         }
 287 #ifndef CONFIG_SDCARD
 288         if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
 289                 printf("fdt CAN");
 290                 fdt_del_tdm(blob);
 291                 fdt_del_spi_slic(blob);
 292         }
 293 #ifndef CONFIG_SPIFLASH
 294         else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
 295                 printf("fdt TDM");
 296                 fdt_del_flexcan(blob);
 297                 fdt_del_spi_flash(blob);
 298         }
 299 #endif
 300 #endif
 301 }
 302 #endif
 303
 304 #ifndef CONFIG_SDCARD
 305 int misc_init_r(void)
 306 {
 307         struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 308         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 309
 310         if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
 311                 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
 312                                 MPC85xx_PMUXCR_CAN1_UART |
 313                                 MPC85xx_PMUXCR_CAN2_TDM |
 314                                 MPC85xx_PMUXCR_CAN2_UART);
 315                 out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
 316         }
 317 #ifndef CONFIG_SPIFLASH
 318                 if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
 319                         printf("TDM");
 320                 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
 321                                 MPC85xx_PMUXCR_CAN1_UART);
 322                 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
 323                                 MPC85xx_PMUXCR_CAN1_TDM);
 324                 clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
 325                 setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
 326                 out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
 327                 out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
 328                 }
 329 #endif
 330         return 0;
 331 }
 332 #endif