board/freescale/p1010rdb/ddr.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   4  */
   5
   6 #include <common.h>
   7 #include <vsprintf.h>
   8 #include <asm/global_data.h>
   9 #include <asm/mmu.h>
  10 #include <asm/immap_85xx.h>
  11 #include <asm/processor.h>
  12 #include <fsl_ddr_sdram.h>
  13 #include <fsl_ddr_dimm_params.h>
  14 #include <asm/io.h>
  15 #include <asm/fsl_law.h>
  16
  17 DECLARE_GLOBAL_DATA_PTR;
  18
  19 #ifndef CONFIG_SYS_DDR_RAW_TIMING
  20 #define CONFIG_SYS_DRAM_SIZE    1024
  21
  22 fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
  23         .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
  24         .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
  25         .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
  26         .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
  27         .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
  28         .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
  29         .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
  30         .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
  31         .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
  32         .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
  33         .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
  34         .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
  35         .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
  36         .ddr_data_init = CONFIG_MEM_INIT_VALUE,
  37         .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
  38         .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
  39         .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
  40         .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
  41         .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
  42         .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
  43         .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
  44         .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
  45         .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
  46         .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
  47 };
  48
  49 fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
  50         .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
  51         .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
  52         .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
  53         .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
  54         .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
  55         .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
  56         .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
  57         .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
  58         .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
  59         .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
  60         .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
  61         .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
  62         .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
  63         .ddr_data_init = CONFIG_MEM_INIT_VALUE,
  64         .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
  65         .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
  66         .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
  67         .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
  68         .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
  69         .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
  70         .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_667,
  71         .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
  72         .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
  73         .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
  74 };
  75
  76 fixed_ddr_parm_t fixed_ddr_parm_0[] = {
  77         {750, 850, &ddr_cfg_regs_800},
  78         {607, 749, &ddr_cfg_regs_667},
  79         {0, 0, NULL}
  80 };
  81
  82 unsigned long get_sdram_size(void)
  83 {
  84         struct cpu_type *cpu;
  85         phys_size_t ddr_size;
  86
  87         cpu = gd->arch.cpu;
  88         /* P1014 and it's derivatives support max 16it DDR width */
  89         if (cpu->soc_ver == SVR_P1014)
  90                 ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
  91         else
  92                 ddr_size = CONFIG_SYS_DRAM_SIZE;
  93
  94         return ddr_size;
  95 }
  96
  97 /*
  98  * Fixed sdram init -- doesn't use serial presence detect.
  99  */
 100 phys_size_t fixed_sdram(void)
 101 {
 102         int i;
 103         char buf[32];
 104         fsl_ddr_cfg_regs_t ddr_cfg_regs;
 105         phys_size_t ddr_size;
 106         ulong ddr_freq, ddr_freq_mhz;
 107         struct cpu_type *cpu;
 108
 109 #if defined(CONFIG_SYS_RAMBOOT)
 110         return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 111 #endif
 112
 113         ddr_freq = get_ddr_freq(0);
 114         ddr_freq_mhz = ddr_freq / 1000000;
 115
 116         printf("Configuring DDR for %s MT/s data rate\n",
 117                                 strmhz(buf, ddr_freq));
 118
 119         for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
 120                 if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
 121                    (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
 122                         memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
 123                                                         sizeof(ddr_cfg_regs));
 124                         break;
 125                 }
 126         }
 127
 128         if (fixed_ddr_parm_0[i].max_freq == 0)
 129                 panic("Unsupported DDR data rate %s MT/s data rate\n",
 130                                         strmhz(buf, ddr_freq));
 131
 132         cpu = gd->arch.cpu;
 133         /* P1014 and it's derivatives support max 16bit DDR width */
 134         if (cpu->soc_ver == SVR_P1014) {
 135                 ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
 136                 ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
 137                 /* divide SA and EA by two and then mask the rest so we don't
 138                  * write to reserved fields */
 139                 ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff;
 140         }
 141
 142         ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 143         fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
 144
 145         if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
 146                                         LAW_TRGT_IF_DDR_1) < 0) {
 147                 printf("ERROR setting Local Access Windows for DDR\n");
 148                 return 0;
 149         }
 150
 151         return ddr_size;
 152 }
 153
 154 #else /* CONFIG_SYS_DDR_RAW_TIMING */
 155 /*
 156  * Samsung K4B2G0846C-HCF8
 157  * The following timing are for "downshift"
 158  * i.e. to use CL9 part as CL7
 159  * otherwise, tAA, tRCD, tRP will be 13500ps
 160  * and tRC will be 49500ps
 161  */
 162 dimm_params_t ddr_raw_timing = {
 163         .n_ranks = 1,
 164         .rank_density = 1073741824u,
 165         .capacity = 1073741824u,
 166         .primary_sdram_width = 32,
 167         .ec_sdram_width = 0,
 168         .registered_dimm = 0,
 169         .mirrored_dimm = 0,
 170         .n_row_addr = 15,
 171         .n_col_addr = 10,
 172         .n_banks_per_sdram_device = 8,
 173         .edc_config = 0,
 174         .burst_lengths_bitmask = 0x0c,
 175
 176         .tckmin_x_ps = 1875,
 177         .caslat_x = 0x1e << 4,  /* 5,6,7,8 */
 178         .taa_ps = 13125,
 179         .twr_ps = 15000,
 180         .trcd_ps = 13125,
 181         .trrd_ps = 7500,
 182         .trp_ps = 13125,
 183         .tras_ps = 37500,
 184         .trc_ps = 50625,
 185         .trfc_ps = 160000,
 186         .twtr_ps = 7500,
 187         .trtp_ps = 7500,
 188         .refresh_rate_ps = 7800000,
 189         .tfaw_ps = 37500,
 190 };
 191
 192 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 193                 unsigned int controller_number,
 194                 unsigned int dimm_number)
 195 {
 196         const char dimm_model[] = "Fixed DDR on board";
 197
 198         if ((controller_number == 0) && (dimm_number == 0)) {
 199                 memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
 200                 memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
 201                 memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
 202         }
 203
 204         return 0;
 205 }
 206
 207 void fsl_ddr_board_options(memctl_options_t *popts,
 208                                 dimm_params_t *pdimm,
 209                                 unsigned int ctrl_num)
 210 {
 211         struct cpu_type *cpu;
 212         int i;
 213         popts->clk_adjust = 6;
 214         popts->cpo_override = 0x1f;
 215         popts->write_data_delay = 2;
 216         popts->half_strength_driver_enable = 1;
 217         /* Write leveling override */
 218         popts->wrlvl_en = 1;
 219         popts->wrlvl_override = 1;
 220         popts->wrlvl_sample = 0xf;
 221         popts->wrlvl_start = 0x8;
 222         popts->trwt_override = 1;
 223         popts->trwt = 0;
 224
 225         cpu = gd->arch.cpu;
 226         /* P1014 and it's derivatives support max 16it DDR width */
 227         if (cpu->soc_ver == SVR_P1014)
 228                 popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
 229
 230         for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 231                 popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
 232                 popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 233         }
 234 }
 235
 236 #endif /* CONFIG_SYS_DDR_RAW_TIMING */