board/freescale/mpc8572ds/ddr.c

   1 /*
   2  * Copyright 2008 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <i2c.h>
  11
  12 #include <asm/fsl_ddr_sdram.h>
  13
  14 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
  15 {
  16         i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
  17 }
  18
  19 unsigned int fsl_ddr_get_mem_data_rate(void)
  20 {
  21         return get_ddr_freq(0);
  22 }
  23
  24 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
  25                       unsigned int ctrl_num)
  26 {
  27         unsigned int i;
  28         unsigned int i2c_address = 0;
  29
  30         for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
  31                 if (ctrl_num == 0 && i == 0) {
  32                         i2c_address = SPD_EEPROM_ADDRESS1;
  33                 }
  34                 if (ctrl_num == 1 && i == 0) {
  35                         i2c_address = SPD_EEPROM_ADDRESS2;
  36                 }
  37                 get_spd(&(ctrl_dimms_spd[i]), i2c_address);
  38         }
  39 }
  40
  41 void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
  42 {
  43         /*
  44          * Factors to consider for clock adjust:
  45          *      - number of chips on bus
  46          *      - position of slot
  47          *      - DDR1 vs. DDR2?
  48          *      - ???
  49          *
  50          * This needs to be determined on a board-by-board basis.
  51          *      0110    3/4 cycle late
  52          *      0111    7/8 cycle late
  53          */
  54         popts->clk_adjust = 7;
  55
  56         /*
  57          * Factors to consider for CPO:
  58          *      - frequency
  59          *      - ddr1 vs. ddr2
  60          */
  61         popts->cpo_override = 10;
  62
  63         /*
  64          * Factors to consider for write data delay:
  65          *      - number of DIMMs
  66          *
  67          * 1 = 1/4 clock delay
  68          * 2 = 1/2 clock delay
  69          * 3 = 3/4 clock delay
  70          * 4 = 1   clock delay
  71          * 5 = 5/4 clock delay
  72          * 6 = 3/2 clock delay
  73          */
  74         popts->write_data_delay = 5;
  75
  76         /*
  77          * Factors to consider for half-strength driver enable:
  78          *      - number of DIMMs installed
  79          */
  80         popts->half_strength_driver_enable = 0;
  81 }