board/freescale/ls1046aqds/ls1046aqds.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #include <common.h>
   8 #include <clock_legacy.h>
   9 #include <i2c.h>
  10 #include <fdt_support.h>
  11 #include <fsl_ddr_sdram.h>
  12 #include <init.h>
  13 #include <asm/global_data.h>
  14 #include <asm/io.h>
  15 #include <asm/arch/clock.h>
  16 #include <asm/arch/fsl_serdes.h>
  17 #include <asm/arch/ppa.h>
  18 #include <asm/arch/fdt.h>
  19 #include <asm/arch/mmu.h>
  20 #include <asm/arch/cpu.h>
  21 #include <asm/arch/soc.h>
  22 #include <asm/arch-fsl-layerscape/fsl_icid.h>
  23 #include <ahci.h>
  24 #include <hwconfig.h>
  25 #include <mmc.h>
  26 #include <scsi.h>
  27 #include <fm_eth.h>
  28 #include <fsl_csu.h>
  29 #include <fsl_esdhc.h>
  30 #include <fsl_ifc.h>
  31 #include <spl.h>
  32 #include "../common/i2c_mux.h"
  33
  34 #include "../common/vid.h"
  35 #include "../common/qixis.h"
  36 #include "ls1046aqds_qixis.h"
  37
  38 DECLARE_GLOBAL_DATA_PTR;
  39
  40 #ifdef CONFIG_TFABOOT
  41 struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
  42         {
  43                 "nor0",
  44                 CONFIG_SYS_NOR0_CSPR,
  45                 CONFIG_SYS_NOR0_CSPR_EXT,
  46                 CONFIG_SYS_NOR_AMASK,
  47                 CONFIG_SYS_NOR_CSOR,
  48                 {
  49                         CONFIG_SYS_NOR_FTIM0,
  50                         CONFIG_SYS_NOR_FTIM1,
  51                         CONFIG_SYS_NOR_FTIM2,
  52                         CONFIG_SYS_NOR_FTIM3
  53                 },
  54
  55         },
  56         {
  57                 "nor1",
  58                 CONFIG_SYS_NOR1_CSPR,
  59                 CONFIG_SYS_NOR1_CSPR_EXT,
  60                 CONFIG_SYS_NOR_AMASK,
  61                 CONFIG_SYS_NOR_CSOR,
  62                 {
  63                         CONFIG_SYS_NOR_FTIM0,
  64                         CONFIG_SYS_NOR_FTIM1,
  65                         CONFIG_SYS_NOR_FTIM2,
  66                         CONFIG_SYS_NOR_FTIM3
  67                 },
  68         },
  69         {
  70                 "nand",
  71                 CONFIG_SYS_NAND_CSPR,
  72                 CONFIG_SYS_NAND_CSPR_EXT,
  73                 CONFIG_SYS_NAND_AMASK,
  74                 CONFIG_SYS_NAND_CSOR,
  75                 {
  76                         CONFIG_SYS_NAND_FTIM0,
  77                         CONFIG_SYS_NAND_FTIM1,
  78                         CONFIG_SYS_NAND_FTIM2,
  79                         CONFIG_SYS_NAND_FTIM3
  80                 },
  81         },
  82         {
  83                 "fpga",
  84                 CONFIG_SYS_FPGA_CSPR,
  85                 CONFIG_SYS_FPGA_CSPR_EXT,
  86                 CONFIG_SYS_FPGA_AMASK,
  87                 CONFIG_SYS_FPGA_CSOR,
  88                 {
  89                         CONFIG_SYS_FPGA_FTIM0,
  90                         CONFIG_SYS_FPGA_FTIM1,
  91                         CONFIG_SYS_FPGA_FTIM2,
  92                         CONFIG_SYS_FPGA_FTIM3
  93                 },
  94         }
  95 };
  96
  97 struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
  98         {
  99                 "nand",
 100                 CONFIG_SYS_NAND_CSPR,
 101                 CONFIG_SYS_NAND_CSPR_EXT,
 102                 CONFIG_SYS_NAND_AMASK,
 103                 CONFIG_SYS_NAND_CSOR,
 104                 {
 105                         CONFIG_SYS_NAND_FTIM0,
 106                         CONFIG_SYS_NAND_FTIM1,
 107                         CONFIG_SYS_NAND_FTIM2,
 108                         CONFIG_SYS_NAND_FTIM3
 109                 },
 110         },
 111         {
 112                 "nor0",
 113                 CONFIG_SYS_NOR0_CSPR,
 114                 CONFIG_SYS_NOR0_CSPR_EXT,
 115                 CONFIG_SYS_NOR_AMASK,
 116                 CONFIG_SYS_NOR_CSOR,
 117                 {
 118                         CONFIG_SYS_NOR_FTIM0,
 119                         CONFIG_SYS_NOR_FTIM1,
 120                         CONFIG_SYS_NOR_FTIM2,
 121                         CONFIG_SYS_NOR_FTIM3
 122                 },
 123         },
 124         {
 125                 "nor1",
 126                 CONFIG_SYS_NOR1_CSPR,
 127                 CONFIG_SYS_NOR1_CSPR_EXT,
 128                 CONFIG_SYS_NOR_AMASK,
 129                 CONFIG_SYS_NOR_CSOR,
 130                 {
 131                         CONFIG_SYS_NOR_FTIM0,
 132                         CONFIG_SYS_NOR_FTIM1,
 133                         CONFIG_SYS_NOR_FTIM2,
 134                         CONFIG_SYS_NOR_FTIM3
 135                 },
 136         },
 137         {
 138                 "fpga",
 139                 CONFIG_SYS_FPGA_CSPR,
 140                 CONFIG_SYS_FPGA_CSPR_EXT,
 141                 CONFIG_SYS_FPGA_AMASK,
 142                 CONFIG_SYS_FPGA_CSOR,
 143                 {
 144                         CONFIG_SYS_FPGA_FTIM0,
 145                         CONFIG_SYS_FPGA_FTIM1,
 146                         CONFIG_SYS_FPGA_FTIM2,
 147                         CONFIG_SYS_FPGA_FTIM3
 148                 },
 149         }
 150 };
 151
 152 void ifc_cfg_boot_info(struct ifc_regs_info *regs_info)
 153 {
 154         enum boot_src src = get_boot_src();
 155
 156         if (src == BOOT_SOURCE_IFC_NAND)
 157                 regs_info->regs = ifc_cfg_nand_boot;
 158         else
 159                 regs_info->regs = ifc_cfg_nor_boot;
 160         regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT;
 161 }
 162
 163 #endif
 164
 165 enum {
 166         MUX_TYPE_GPIO,
 167 };
 168
 169 int checkboard(void)
 170 {
 171 #ifdef CONFIG_TFABOOT
 172         enum boot_src src = get_boot_src();
 173 #endif
 174         char buf[64];
 175 #ifndef CONFIG_SD_BOOT
 176         u8 sw;
 177 #endif
 178
 179         puts("Board: LS1046AQDS, boot from ");
 180
 181 #ifdef CONFIG_TFABOOT
 182         if (src == BOOT_SOURCE_SD_MMC)
 183                 puts("SD\n");
 184         else {
 185 #endif
 186
 187 #ifdef CONFIG_SD_BOOT
 188         puts("SD\n");
 189 #else
 190         sw = QIXIS_READ(brdcfg[0]);
 191         sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
 192
 193         if (sw < 0x8)
 194                 printf("vBank: %d\n", sw);
 195         else if (sw == 0x8)
 196                 puts("PromJet\n");
 197         else if (sw == 0x9)
 198                 puts("NAND\n");
 199         else if (sw == 0xF)
 200                 printf("QSPI\n");
 201         else
 202                 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 203 #endif
 204
 205 #ifdef CONFIG_TFABOOT
 206         }
 207 #endif
 208         printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
 209                QIXIS_READ(id), QIXIS_READ(arch));
 210
 211         printf("FPGA:  v%d (%s), build %d\n",
 212                (int)QIXIS_READ(scver), qixis_read_tag(buf),
 213                (int)qixis_read_minor());
 214
 215         return 0;
 216 }
 217
 218 bool if_board_diff_clk(void)
 219 {
 220         u8 diff_conf = QIXIS_READ(brdcfg[11]);
 221
 222         return diff_conf & 0x40;
 223 }
 224
 225 unsigned long get_board_sys_clk(void)
 226 {
 227         u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
 228
 229         switch (sysclk_conf & 0x0f) {
 230         case QIXIS_SYSCLK_64:
 231                 return 64000000;
 232         case QIXIS_SYSCLK_83:
 233                 return 83333333;
 234         case QIXIS_SYSCLK_100:
 235                 return 100000000;
 236         case QIXIS_SYSCLK_125:
 237                 return 125000000;
 238         case QIXIS_SYSCLK_133:
 239                 return 133333333;
 240         case QIXIS_SYSCLK_150:
 241                 return 150000000;
 242         case QIXIS_SYSCLK_160:
 243                 return 160000000;
 244         case QIXIS_SYSCLK_166:
 245                 return 166666666;
 246         }
 247
 248         return 66666666;
 249 }
 250
 251 unsigned long get_board_ddr_clk(void)
 252 {
 253         u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
 254
 255         if (if_board_diff_clk())
 256                 return get_board_sys_clk();
 257         switch ((ddrclk_conf & 0x30) >> 4) {
 258         case QIXIS_DDRCLK_100:
 259                 return 100000000;
 260         case QIXIS_DDRCLK_125:
 261                 return 125000000;
 262         case QIXIS_DDRCLK_133:
 263                 return 133333333;
 264         }
 265
 266         return 66666666;
 267 }
 268
 269 #ifdef CONFIG_LPUART
 270 u32 get_lpuart_clk(void)
 271 {
 272         return gd->bus_clk;
 273 }
 274 #endif
 275
 276 int dram_init(void)
 277 {
 278         /*
 279          * When resuming from deep sleep, the I2C channel may not be
 280          * in the default channel. So, switch to the default channel
 281          * before accessing DDR SPD.
 282          *
 283          * PCA9547 mount on I2C1 bus
 284          */
 285         select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 286         fsl_initdram();
 287 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 288         defined(CONFIG_SPL_BUILD)
 289         /* This will break-before-make MMU for DDR */
 290         update_early_mmu_table();
 291 #endif
 292
 293         return 0;
 294 }
 295
 296 int i2c_multiplexer_select_vid_channel(u8 channel)
 297 {
 298         return select_i2c_ch_pca9547(channel, 0);
 299 }
 300
 301 int board_early_init_f(void)
 302 {
 303         u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
 304 #ifdef CONFIG_HAS_FSL_XHCI_USB
 305         struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 306         u32 usb_pwrfault;
 307 #endif
 308 #ifdef CONFIG_LPUART
 309         u8 uart;
 310 #endif
 311
 312         /*
 313          * Enable secure system counter for timer
 314          */
 315         out_le32(cntcr, 0x1);
 316
 317 #if defined(CONFIG_SYS_I2C_EARLY_INIT)
 318         i2c_early_init_f();
 319 #endif
 320         fsl_lsch2_early_init_f();
 321
 322 #ifdef CONFIG_HAS_FSL_XHCI_USB
 323         out_be32(&scfg->rcwpmuxcr0, 0x3333);
 324         out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
 325         usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
 326                         SCFG_USBPWRFAULT_USB3_SHIFT) |
 327                         (SCFG_USBPWRFAULT_DEDICATED <<
 328                         SCFG_USBPWRFAULT_USB2_SHIFT) |
 329                         (SCFG_USBPWRFAULT_SHARED <<
 330                         SCFG_USBPWRFAULT_USB1_SHIFT);
 331         out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
 332 #endif
 333
 334 #ifdef CONFIG_LPUART
 335         /* We use lpuart0 as system console */
 336         uart = QIXIS_READ(brdcfg[14]);
 337         uart &= ~CFG_UART_MUX_MASK;
 338         uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT;
 339         QIXIS_WRITE(brdcfg[14], uart);
 340 #endif
 341
 342         return 0;
 343 }
 344
 345 #ifdef CONFIG_FSL_DEEP_SLEEP
 346 /* determine if it is a warm boot */
 347 bool is_warm_boot(void)
 348 {
 349 #define DCFG_CCSR_CRSTSR_WDRFR  (1 << 3)
 350         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 351
 352         if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
 353                 return 1;
 354
 355         return 0;
 356 }
 357 #endif
 358
 359 int config_board_mux(int ctrl_type)
 360 {
 361         u8 reg14;
 362
 363         reg14 = QIXIS_READ(brdcfg[14]);
 364
 365         switch (ctrl_type) {
 366         case MUX_TYPE_GPIO:
 367                 reg14 = (reg14 & (~0x6)) | 0x2;
 368                 break;
 369         default:
 370                 puts("Unsupported mux interface type\n");
 371                 return -1;
 372         }
 373
 374         QIXIS_WRITE(brdcfg[14], reg14);
 375
 376         return 0;
 377 }
 378
 379 int config_serdes_mux(void)
 380 {
 381         return 0;
 382 }
 383
 384 #ifdef CONFIG_MISC_INIT_R
 385 int misc_init_r(void)
 386 {
 387         if (hwconfig("gpio"))
 388                 config_board_mux(MUX_TYPE_GPIO);
 389
 390         return 0;
 391 }
 392 #endif
 393
 394 int board_init(void)
 395 {
 396         select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 397
 398 #ifdef CONFIG_SYS_FSL_SERDES
 399         config_serdes_mux();
 400 #endif
 401
 402         if (adjust_vdd(0))
 403                 printf("Warning: Adjusting core voltage failed.\n");
 404
 405 #ifdef CONFIG_FSL_LS_PPA
 406         ppa_init();
 407 #endif
 408
 409 #ifdef CONFIG_NXP_ESBC
 410         /*
 411          * In case of Secure Boot, the IBR configures the SMMU
 412          * to allow only Secure transactions.
 413          * SMMU must be reset in bypass mode.
 414          * Set the ClientPD bit and Clear the USFCFG Bit
 415          */
 416         u32 val;
 417         val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 418         out_le32(SMMU_SCR0, val);
 419         val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 420         out_le32(SMMU_NSCR0, val);
 421 #endif
 422
 423         return 0;
 424 }
 425
 426 #ifdef CONFIG_OF_BOARD_SETUP
 427 int ft_board_setup(void *blob, struct bd_info *bd)
 428 {
 429         u64 base[CONFIG_NR_DRAM_BANKS];
 430         u64 size[CONFIG_NR_DRAM_BANKS];
 431         u8 reg;
 432
 433         /* fixup DT for the two DDR banks */
 434         base[0] = gd->bd->bi_dram[0].start;
 435         size[0] = gd->bd->bi_dram[0].size;
 436         base[1] = gd->bd->bi_dram[1].start;
 437         size[1] = gd->bd->bi_dram[1].size;
 438
 439         fdt_fixup_memory_banks(blob, base, size, 2);
 440         ft_cpu_setup(blob, bd);
 441
 442 #ifdef CONFIG_SYS_DPAA_FMAN
 443 #ifndef CONFIG_DM_ETH
 444         fdt_fixup_fman_ethernet(blob);
 445 #endif
 446         fdt_fixup_board_enet(blob);
 447 #endif
 448
 449         fdt_fixup_icid(blob);
 450
 451         reg = QIXIS_READ(brdcfg[0]);
 452         reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
 453
 454         /* Disable IFC if QSPI is enabled */
 455         if (reg == 0xF)
 456                 do_fixup_by_compat(blob, "fsl,ifc",
 457                                    "status", "disabled", 8 + 1, 1);
 458
 459         return 0;
 460 }
 461 #endif
 462
 463 u8 flash_read8(void *addr)
 464 {
 465         return __raw_readb(addr + 1);
 466 }
 467
 468 void flash_write16(u16 val, void *addr)
 469 {
 470         u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
 471
 472         __raw_writew(shftval, addr);
 473 }
 474
 475 u16 flash_read16(void *addr)
 476 {
 477         u16 val = __raw_readw(addr);
 478
 479         return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 480 }
 481
 482 #if defined(CONFIG_TFABOOT) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 483 void *env_sf_get_env_addr(void)
 484 {
 485         return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
 486 }
 487 #endif