2 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
4 * Parts are shamelessly stolen from various TI sources, original copyright
6 * -----------------------------------------------------------------
8 * Copyright (C) 2004 Texas Instruments.
10 * ----------------------------------------------------------------------------
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 * ----------------------------------------------------------------------------
29 #include <asm/arch/hardware.h>
30 #include <asm/arch/emac_defs.h>
32 DECLARE_GLOBAL_DATA_PTR;
34 extern void timer_init(void);
35 extern int eth_hw_init(void);
38 /* Works on Always On power domain only (no PD argument) */
39 void lpsc_on(unsigned int id)
41 dv_reg_p mdstat, mdctl;
43 if (id >= DAVINCI_LPSC_GEM)
44 return; /* Don't work on DSP Power Domain */
46 mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
47 mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
49 while (REG(PSC_PTSTAT) & 0x01) {;}
51 if ((*mdstat & 0x1f) == 0x03)
52 return; /* Already on and enabled */
56 /* Special treatment for some modules as for sprue14 p.7.4.2 */
57 if ( (id == DAVINCI_LPSC_VPSSSLV) ||
58 (id == DAVINCI_LPSC_EMAC) ||
59 (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
60 (id == DAVINCI_LPSC_MDIO) ||
61 (id == DAVINCI_LPSC_USB) ||
62 (id == DAVINCI_LPSC_ATA) ||
63 (id == DAVINCI_LPSC_VLYNQ) ||
64 (id == DAVINCI_LPSC_UHPI) ||
65 (id == DAVINCI_LPSC_DDR_EMIF) ||
66 (id == DAVINCI_LPSC_AEMIF) ||
67 (id == DAVINCI_LPSC_MMC_SD) ||
68 (id == DAVINCI_LPSC_MEMSTICK) ||
69 (id == DAVINCI_LPSC_McBSP) ||
70 (id == DAVINCI_LPSC_GPIO)
74 REG(PSC_PTCMD) = 0x01;
76 while (REG(PSC_PTSTAT) & 0x03) {;}
77 while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
84 if (REG(PSC_PDSTAT1) & 0x1f)
85 return; /* Already on */
87 REG(PSC_GBLCTL) |= 0x01;
88 REG(PSC_PDCTL1) |= 0x01;
89 REG(PSC_PDCTL1) &= ~0x100;
90 REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
91 REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
92 REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
93 REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
94 REG(PSC_PTCMD) = 0x02;
96 for (i = 0; i < 100; i++) {
97 if (REG(PSC_EPCPR) & 0x02)
101 REG(PSC_CHP_SHRTSW) = 0x01;
102 REG(PSC_PDCTL1) |= 0x100;
103 REG(PSC_EPCCR) = 0x02;
105 for (i = 0; i < 100; i++) {
106 if (!(REG(PSC_PTSTAT) & 0x02))
110 REG(PSC_GBLCTL) &= ~0x1f;
116 /* arch number of the board */
117 gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
119 /* address of boot parameters */
120 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
122 /* Workaround for TMS320DM6446 errata 1.3.22 */
123 REG(PSC_SILVER_BULLET) = 0;
125 /* Power on required peripherals */
126 lpsc_on(DAVINCI_LPSC_EMAC);
127 lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
128 lpsc_on(DAVINCI_LPSC_MDIO);
129 lpsc_on(DAVINCI_LPSC_I2C);
130 lpsc_on(DAVINCI_LPSC_UART0);
131 lpsc_on(DAVINCI_LPSC_TIMER1);
132 lpsc_on(DAVINCI_LPSC_GPIO);
134 /* Powerup the DSP */
137 /* Bringup UART0 out of reset */
138 REG(UART0_PWREMU_MGMT) = 0x0000e003;
140 /* Enable GIO3.3V cells used for EMAC */
141 REG(VDD3P3V_PWDN) = 0;
143 /* Enable UART0 MUX lines */
146 /* Enable EMAC and AEMIF pins */
147 REG(PINMUX0) = 0x80000c1f;
149 /* Enable I2C pin Mux */
150 REG(PINMUX1) |= (1 << 7);
152 /* Set the Bus Priority Register to appropriate value */
160 int misc_init_r (void)
162 u_int8_t tmp[20], buf[10];
166 clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
168 printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
169 printf ("DDR Clock : %dMHz\n", (clk / 2));
171 /* Set Ethernet MAC address from EEPROM */
172 if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
173 printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
176 for (i = 0; i < 6; i++)
179 if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
180 sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
181 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
182 setenv("ethaddr", (char *)&tmp[0]);
187 printf("ethernet init failed!\n");
189 i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1);
191 setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc"));
198 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
199 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;