1 // SPDX-License-Identifier: GPL-2.0
3 * Functions to sequence PREFLUSH and FUA writes.
5 * Copyright (C) 2011 Max Planck Institute for Gravitational Physics
6 * Copyright (C) 2011 Tejun Heo <tj@kernel.org>
8 * REQ_{PREFLUSH|FUA} requests are decomposed to sequences consisted of three
9 * optional steps - PREFLUSH, DATA and POSTFLUSH - according to the request
10 * properties and hardware capability.
12 * If a request doesn't have data, only REQ_PREFLUSH makes sense, which
13 * indicates a simple flush request. If there is data, REQ_PREFLUSH indicates
14 * that the device cache should be flushed before the data is executed, and
15 * REQ_FUA means that the data must be on non-volatile media on request
18 * If the device doesn't have writeback cache, PREFLUSH and FUA don't make any
19 * difference. The requests are either completed immediately if there's no data
20 * or executed as normal requests otherwise.
22 * If the device has writeback cache and supports FUA, REQ_PREFLUSH is
23 * translated to PREFLUSH but REQ_FUA is passed down directly with DATA.
25 * If the device has writeback cache and doesn't support FUA, REQ_PREFLUSH
26 * is translated to PREFLUSH and REQ_FUA to POSTFLUSH.
28 * The actual execution of flush is double buffered. Whenever a request
29 * needs to execute PRE or POSTFLUSH, it queues at
30 * fq->flush_queue[fq->flush_pending_idx]. Once certain criteria are met, a
31 * REQ_OP_FLUSH is issued and the pending_idx is toggled. When the flush
32 * completes, all the requests which were pending are proceeded to the next
33 * step. This allows arbitrary merging of different types of PREFLUSH/FUA
36 * Currently, the following conditions are used to determine when to issue
39 * C1. At any given time, only one flush shall be in progress. This makes
40 * double buffering sufficient.
42 * C2. Flush is deferred if any request is executing DATA of its sequence.
43 * This avoids issuing separate POSTFLUSHes for requests which shared
46 * C3. The second condition is ignored if there is a request which has
47 * waited longer than FLUSH_PENDING_TIMEOUT. This is to avoid
48 * starvation in the unlikely case where there are continuous stream of
49 * FUA (without PREFLUSH) requests.
51 * For devices which support FUA, it isn't clear whether C2 (and thus C3)
54 * Note that a sequenced PREFLUSH/FUA request with DATA is completed twice.
55 * Once while executing DATA and again after the whole sequence is
56 * complete. The first completion updates the contained bio but doesn't
57 * finish it so that the bio submitter is notified only after the whole
58 * sequence is complete. This is implemented by testing RQF_FLUSH_SEQ in
61 * The above peculiarity requires that each PREFLUSH/FUA request has only one
62 * bio attached to it, which is guaranteed as they aren't allowed to be
63 * merged in the usual way.
66 #include <linux/kernel.h>
67 #include <linux/module.h>
68 #include <linux/bio.h>
69 #include <linux/blkdev.h>
70 #include <linux/gfp.h>
71 #include <linux/blk-mq.h>
72 #include <linux/lockdep.h>
76 #include "blk-mq-tag.h"
77 #include "blk-mq-sched.h"
79 /* PREFLUSH/FUA sequences */
81 REQ_FSEQ_PREFLUSH = (1 << 0), /* pre-flushing in progress */
82 REQ_FSEQ_DATA = (1 << 1), /* data write in progress */
83 REQ_FSEQ_POSTFLUSH = (1 << 2), /* post-flushing in progress */
84 REQ_FSEQ_DONE = (1 << 3),
86 REQ_FSEQ_ACTIONS = REQ_FSEQ_PREFLUSH | REQ_FSEQ_DATA |
90 * If flush has been pending longer than the following timeout,
91 * it's issued even if flush_data requests are still in flight.
93 FLUSH_PENDING_TIMEOUT = 5 * HZ,
96 static void blk_kick_flush(struct request_queue *q,
97 struct blk_flush_queue *fq, unsigned int flags);
99 static unsigned int blk_flush_policy(unsigned long fflags, struct request *rq)
101 unsigned int policy = 0;
103 if (blk_rq_sectors(rq))
104 policy |= REQ_FSEQ_DATA;
106 if (fflags & (1UL << QUEUE_FLAG_WC)) {
107 if (rq->cmd_flags & REQ_PREFLUSH)
108 policy |= REQ_FSEQ_PREFLUSH;
109 if (!(fflags & (1UL << QUEUE_FLAG_FUA)) &&
110 (rq->cmd_flags & REQ_FUA))
111 policy |= REQ_FSEQ_POSTFLUSH;
116 static unsigned int blk_flush_cur_seq(struct request *rq)
118 return 1 << ffz(rq->flush.seq);
121 static void blk_flush_restore_request(struct request *rq)
124 * After flush data completion, @rq->bio is %NULL but we need to
125 * complete the bio again. @rq->biotail is guaranteed to equal the
126 * original @rq->bio. Restore it.
128 rq->bio = rq->biotail;
130 /* make @rq a normal request */
131 rq->rq_flags &= ~RQF_FLUSH_SEQ;
132 rq->end_io = rq->flush.saved_end_io;
135 static void blk_flush_queue_rq(struct request *rq, bool add_front)
137 blk_mq_add_to_requeue_list(rq, add_front, true);
140 static void blk_account_io_flush(struct request *rq)
142 struct hd_struct *part = &rq->rq_disk->part0;
145 part_stat_inc(part, ios[STAT_FLUSH]);
146 part_stat_add(part, nsecs[STAT_FLUSH],
147 ktime_get_ns() - rq->start_time_ns);
152 * blk_flush_complete_seq - complete flush sequence
153 * @rq: PREFLUSH/FUA request being sequenced
155 * @seq: sequences to complete (mask of %REQ_FSEQ_*, can be zero)
156 * @error: whether an error occurred
158 * @rq just completed @seq part of its flush sequence, record the
159 * completion and trigger the next step.
162 * spin_lock_irq(fq->mq_flush_lock)
164 static void blk_flush_complete_seq(struct request *rq,
165 struct blk_flush_queue *fq,
166 unsigned int seq, blk_status_t error)
168 struct request_queue *q = rq->q;
169 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
170 unsigned int cmd_flags;
172 BUG_ON(rq->flush.seq & seq);
173 rq->flush.seq |= seq;
174 cmd_flags = rq->cmd_flags;
177 seq = blk_flush_cur_seq(rq);
182 case REQ_FSEQ_PREFLUSH:
183 case REQ_FSEQ_POSTFLUSH:
184 /* queue for flush */
185 if (list_empty(pending))
186 fq->flush_pending_since = jiffies;
187 list_move_tail(&rq->flush.list, pending);
191 list_move_tail(&rq->flush.list, &fq->flush_data_in_flight);
192 blk_flush_queue_rq(rq, true);
197 * @rq was previously adjusted by blk_insert_flush() for
198 * flush sequencing and may already have gone through the
199 * flush data request completion path. Restore @rq for
200 * normal completion and end it.
202 BUG_ON(!list_empty(&rq->queuelist));
203 list_del_init(&rq->flush.list);
204 blk_flush_restore_request(rq);
205 blk_mq_end_request(rq, error);
212 blk_kick_flush(q, fq, cmd_flags);
215 static void flush_end_io(struct request *flush_rq, blk_status_t error)
217 struct request_queue *q = flush_rq->q;
218 struct list_head *running;
219 struct request *rq, *n;
220 unsigned long flags = 0;
221 struct blk_flush_queue *fq = blk_get_flush_queue(q, flush_rq->mq_ctx);
223 blk_account_io_flush(flush_rq);
225 /* release the tag's ownership to the req cloned from */
226 spin_lock_irqsave(&fq->mq_flush_lock, flags);
228 if (!refcount_dec_and_test(&flush_rq->ref)) {
229 fq->rq_status = error;
230 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
234 if (fq->rq_status != BLK_STS_OK)
235 error = fq->rq_status;
238 flush_rq->tag = BLK_MQ_NO_TAG;
240 blk_mq_put_driver_tag(flush_rq);
241 flush_rq->internal_tag = BLK_MQ_NO_TAG;
244 running = &fq->flush_queue[fq->flush_running_idx];
245 BUG_ON(fq->flush_pending_idx == fq->flush_running_idx);
247 /* account completion of the flush request */
248 fq->flush_running_idx ^= 1;
250 /* and push the waiting requests to the next stage */
251 list_for_each_entry_safe(rq, n, running, flush.list) {
252 unsigned int seq = blk_flush_cur_seq(rq);
254 BUG_ON(seq != REQ_FSEQ_PREFLUSH && seq != REQ_FSEQ_POSTFLUSH);
255 blk_flush_complete_seq(rq, fq, seq, error);
258 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
262 * blk_kick_flush - consider issuing flush request
263 * @q: request_queue being kicked
265 * @flags: cmd_flags of the original request
267 * Flush related states of @q have changed, consider issuing flush request.
268 * Please read the comment at the top of this file for more info.
271 * spin_lock_irq(fq->mq_flush_lock)
274 static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq,
277 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
278 struct request *first_rq =
279 list_first_entry(pending, struct request, flush.list);
280 struct request *flush_rq = fq->flush_rq;
282 /* C1 described at the top of this file */
283 if (fq->flush_pending_idx != fq->flush_running_idx || list_empty(pending))
287 if (!list_empty(&fq->flush_data_in_flight) &&
289 fq->flush_pending_since + FLUSH_PENDING_TIMEOUT))
293 * Issue flush and toggle pending_idx. This makes pending_idx
294 * different from running_idx, which means flush is in flight.
296 fq->flush_pending_idx ^= 1;
298 blk_rq_init(q, flush_rq);
301 * In case of none scheduler, borrow tag from the first request
302 * since they can't be in flight at the same time. And acquire
303 * the tag's ownership for flush req.
305 * In case of IO scheduler, flush rq need to borrow scheduler tag
306 * just for cheating put/get driver tag.
308 flush_rq->mq_ctx = first_rq->mq_ctx;
309 flush_rq->mq_hctx = first_rq->mq_hctx;
312 flush_rq->tag = first_rq->tag;
315 * We borrow data request's driver tag, so have to mark
316 * this flush request as INFLIGHT for avoiding double
317 * account of this driver tag
319 flush_rq->rq_flags |= RQF_MQ_INFLIGHT;
321 flush_rq->internal_tag = first_rq->internal_tag;
323 flush_rq->cmd_flags = REQ_OP_FLUSH | REQ_PREFLUSH;
324 flush_rq->cmd_flags |= (flags & REQ_DRV) | (flags & REQ_FAILFAST_MASK);
325 flush_rq->rq_flags |= RQF_FLUSH_SEQ;
326 flush_rq->rq_disk = first_rq->rq_disk;
327 flush_rq->end_io = flush_end_io;
329 blk_flush_queue_rq(flush_rq, false);
332 static void mq_flush_data_end_io(struct request *rq, blk_status_t error)
334 struct request_queue *q = rq->q;
335 struct blk_mq_hw_ctx *hctx = rq->mq_hctx;
336 struct blk_mq_ctx *ctx = rq->mq_ctx;
338 struct blk_flush_queue *fq = blk_get_flush_queue(q, ctx);
341 WARN_ON(rq->tag < 0);
342 blk_mq_put_driver_tag(rq);
346 * After populating an empty queue, kick it to avoid stall. Read
347 * the comment in flush_end_io().
349 spin_lock_irqsave(&fq->mq_flush_lock, flags);
350 blk_flush_complete_seq(rq, fq, REQ_FSEQ_DATA, error);
351 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
353 blk_mq_sched_restart(hctx);
357 * blk_insert_flush - insert a new PREFLUSH/FUA request
358 * @rq: request to insert
360 * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
361 * or __blk_mq_run_hw_queue() to dispatch request.
362 * @rq is being submitted. Analyze what needs to be done and put it on the
365 void blk_insert_flush(struct request *rq)
367 struct request_queue *q = rq->q;
368 unsigned long fflags = q->queue_flags; /* may change, cache */
369 unsigned int policy = blk_flush_policy(fflags, rq);
370 struct blk_flush_queue *fq = blk_get_flush_queue(q, rq->mq_ctx);
373 * @policy now records what operations need to be done. Adjust
374 * REQ_PREFLUSH and FUA for the driver.
376 rq->cmd_flags &= ~REQ_PREFLUSH;
377 if (!(fflags & (1UL << QUEUE_FLAG_FUA)))
378 rq->cmd_flags &= ~REQ_FUA;
381 * REQ_PREFLUSH|REQ_FUA implies REQ_SYNC, so if we clear any
382 * of those flags, we have to set REQ_SYNC to avoid skewing
383 * the request accounting.
385 rq->cmd_flags |= REQ_SYNC;
388 * An empty flush handed down from a stacking driver may
389 * translate into nothing if the underlying device does not
390 * advertise a write-back cache. In this case, simply
391 * complete the request.
394 blk_mq_end_request(rq, 0);
398 BUG_ON(rq->bio != rq->biotail); /*assumes zero or single bio rq */
401 * If there's data but flush is not necessary, the request can be
402 * processed directly without going through flush machinery. Queue
403 * for normal execution.
405 if ((policy & REQ_FSEQ_DATA) &&
406 !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
407 blk_mq_request_bypass_insert(rq, false, false);
412 * @rq should go through flush machinery. Mark it part of flush
413 * sequence and submit for further processing.
415 memset(&rq->flush, 0, sizeof(rq->flush));
416 INIT_LIST_HEAD(&rq->flush.list);
417 rq->rq_flags |= RQF_FLUSH_SEQ;
418 rq->flush.saved_end_io = rq->end_io; /* Usually NULL */
420 rq->end_io = mq_flush_data_end_io;
422 spin_lock_irq(&fq->mq_flush_lock);
423 blk_flush_complete_seq(rq, fq, REQ_FSEQ_ACTIONS & ~policy, 0);
424 spin_unlock_irq(&fq->mq_flush_lock);
428 * blkdev_issue_flush - queue a flush
429 * @bdev: blockdev to issue flush for
430 * @gfp_mask: memory allocation flags (for bio_alloc)
433 * Issue a flush for the block device in question.
435 int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask)
440 bio = bio_alloc(gfp_mask, 0);
441 bio_set_dev(bio, bdev);
442 bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
444 ret = submit_bio_wait(bio);
448 EXPORT_SYMBOL(blkdev_issue_flush);
450 struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size,
453 struct blk_flush_queue *fq;
454 int rq_sz = sizeof(struct request);
456 fq = kzalloc_node(sizeof(*fq), flags, node);
460 spin_lock_init(&fq->mq_flush_lock);
462 rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
463 fq->flush_rq = kzalloc_node(rq_sz, flags, node);
467 INIT_LIST_HEAD(&fq->flush_queue[0]);
468 INIT_LIST_HEAD(&fq->flush_queue[1]);
469 INIT_LIST_HEAD(&fq->flush_data_in_flight);
471 lockdep_register_key(&fq->key);
472 lockdep_set_class(&fq->mq_flush_lock, &fq->key);
482 void blk_free_flush_queue(struct blk_flush_queue *fq)
484 /* bio based request queue hasn't flush queue */
488 lockdep_unregister_key(&fq->key);