1 ## Process this file with automake to generate Makefile.in
3 # Copyright (C) 2012-2018 Free Software Foundation, Inc.
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; see the file COPYING3. If not see
17 # <http://www.gnu.org/licenses/>.
20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
25 tooldir = $(exec_prefix)/$(target_alias)
27 ## These aren't set by automake, because they appear in
28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
29 ## thus is not seen by automake.
30 CC_FOR_BUILD = @CC_FOR_BUILD@
31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
38 # Automake 1.10+ disables lex and yacc output file regeneration if
39 # maintainer mode is disabled. Avoid this.
43 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
44 # -I../zlib, unless we were configured with --with-system-zlib, in which
45 # case both are empty.
49 WARN_CFLAGS = @WARN_CFLAGS@
50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
51 NO_WERROR = @NO_WERROR@
52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
56 # these two are almost the same program
60 # objcopy and strip should be the same program
70 # These should all be the same program too.
75 # This is the demangler, as a standalone program.
76 # Note: This one is used as the installed name too, unlike the above.
77 DEMANGLER_PROG=cxxfilt
79 ADDR2LINE_PROG=addr2line
86 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
88 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
90 bin_SCRIPTS = @BUILD_INSTALL_MISC@
91 EXTRA_SCRIPTS = embedspu
94 BFDTEST1_PROG = bfdtest1
95 BFDTEST2_PROG = bfdtest2
97 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG)
99 ## We need a special rule to install the programs which are built with
100 ## -new, and to rename cxxfilt to c++filt.
101 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
102 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
104 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
106 # Stuff that goes in tooldir/ if appropriate.
107 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
109 BASEDIR = $(srcdir)/..
110 BFDDIR = $(BASEDIR)/bfd
111 INCDIR = $(BASEDIR)/include
113 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
116 -DLOCALEDIR="\"$(datadir)/locale\"" \
117 -Dbin_dummy_emulation=$(EMULATION_VECTOR)
120 arsup.h binemul.h bucomm.h budbg.h \
121 coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
122 objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
125 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
126 BUILT_SOURCES = $(GENERATED_HFILES)
129 addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
130 coffdump.c coffgrok.c cxxfilt.c \
131 dwarf.c debug.c dlltool.c dllwrap.c \
132 elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
133 is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
134 nm.c not-ranlib.c not-strip.c \
135 objcopy.c objdump.c prdbg.c \
136 od-xcoff.c od-macho.c \
137 rclex.c rdcoff.c rddbg.c readelf.c rename.c \
138 resbin.c rescoff.c resrc.c resres.c \
139 size.c srconv.c stabs.c strings.c sysdump.c \
140 syslex_wrap.c unwind-ia64.c elfedit.c version.c \
141 windres.c winduni.c wrstabs.c \
145 arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
146 defparse.c deflex.c rcparse.c mcparse.c
148 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
149 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
151 # Extra object files for objdump
152 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
154 # Code shared by all the binutils.
155 BULIBS = bucomm.c version.c filemode.c
157 # Code shared by the ELF related programs.
160 BFDLIB = ../bfd/libbfd.la
162 OPCODES = ../opcodes/libopcodes.la
164 LIBIBERTY = ../libiberty/libiberty.a
166 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
167 po/POTFILES.in: @MAINT@ Makefile
168 for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
169 && mv tmp $(srcdir)/po/POTFILES.in
175 if [ -f $$r/../gcc/xgcc ] ; then \
176 if [ -f $$r/../newlib/Makefile ] ; then \
177 echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
179 echo $$r/../gcc/xgcc -B$$r/../gcc/; \
182 if [ "@host@" = "@target@" ] ; then \
185 echo gcc | sed '$(transform)'; \
189 check-DEJAGNU: site.exp
190 srcdir=`cd $(srcdir) && pwd`; export srcdir; \
192 LC_ALL=C; export LC_ALL; \
193 EXPECT=$(EXPECT); export EXPECT; \
194 runtest=$(RUNTEST); \
195 if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
196 CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
197 CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
198 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
200 else echo "WARNING: could not find \`runtest'" 1>&2; :;\
203 development.exp: $(BFDDIR)/development.sh
204 $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh \
205 | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
208 /bin/sh $(srcdir)/sanity.sh $(bindir)
210 # There's no global DEPENDENCIES. So, we must explicitly list everything
211 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
212 # non-empty until configure time. Ugh!
213 size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
214 objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
215 nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
216 ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
217 strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
218 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
219 ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
220 cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
221 objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
222 srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
223 sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
224 coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
225 dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
226 windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
227 windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
228 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
229 readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
230 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
231 dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
232 bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
233 bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
235 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
237 size_SOURCES = size.c $(BULIBS)
239 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
241 strings_SOURCES = strings.c $(BULIBS)
243 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
244 readelf_LDADD = $(LIBINTL) $(LIBIBERTY) $(ZLIB)
246 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
247 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
249 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
251 nm_new_SOURCES = nm.c $(BULIBS)
253 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
254 EXTRA_objdump_SOURCES = od-xcoff.c
255 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
257 objdump.@OBJEXT@:objdump.c
259 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
260 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
263 source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
264 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
266 $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
269 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
271 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
272 emul_$(EMULATION).c $(BULIBS)
273 EXTRA_ar_SOURCES = $(CFILES)
274 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
276 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
277 binemul.c emul_$(EMULATION).c $(BULIBS)
278 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
280 addr2line_SOURCES = addr2line.c $(BULIBS)
282 # The following is commented out for the conversion to automake.
283 # This rule creates a single binary that switches between ar and ranlib
284 # by looking at argv[0]. Use this kludge to save some disk space.
285 # However, you have to install things by hand.
286 # (That is after 'make install', replace the installed ranlib by a link to ar.)
287 # Alternatively, you can install ranlib.sh as ranlib.
288 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
289 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
290 # -rm -f $(RANLIB_PROG)
291 # -ln $(AR_PROG) $(RANLIB_PROG)
293 # objcopy and strip in one binary that uses argv[0] to decide its action.
295 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
296 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
297 # -rm -f $(STRIP_PROG)
298 # -ln $(OBJCOPY_PROG) $(STRIP_PROG)
300 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
301 ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
302 ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
303 ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
305 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
306 ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
308 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
309 $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
311 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
312 $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
314 sysinfo.@OBJEXT@: sysinfo.c
315 if [ -r sysinfo.c ]; then \
316 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
318 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
321 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
322 $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
324 embedspu: embedspu.sh Makefile
325 awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
328 # We need these for parallel make.
331 # Disable -Werror, if it has been enabled, since old versions of bison/
332 # yacc will produce working code which contain compile time warnings.
333 arparse.@OBJEXT@: arparse.c
335 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
336 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
339 source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
340 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
342 $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
345 arlex.@OBJEXT@: arlex.c
347 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
348 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
351 source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
352 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
354 $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
357 sysroff.@OBJEXT@: sysroff.c
359 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
360 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
363 source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
364 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
366 $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
369 defparse.@OBJEXT@: defparse.c
371 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
372 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
375 source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
376 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
378 $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
381 deflex.@OBJEXT@: deflex.c
383 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
384 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
387 source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
388 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
390 $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
393 rcparse.@OBJEXT@: rcparse.c
395 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
396 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
399 source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
400 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
402 $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
405 mcparse.@OBJEXT@: mcparse.c
407 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
408 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
411 source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
412 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
414 $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
417 rclex.@OBJEXT@: rclex.c
419 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
420 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
423 source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
424 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
426 $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
429 mclex.@OBJEXT@: mclex.c
431 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
432 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
435 source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
436 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
438 $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
441 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
442 srconv.@OBJEXT@: sysroff.c
444 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
445 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
449 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
450 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
453 source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
454 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
456 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
461 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
462 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
465 source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
466 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
468 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
471 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
473 sysdump_SOURCES = sysdump.c $(BULIBS)
474 sysdump.@OBJEXT@: sysroff.c
476 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
477 winduni.c resres.c $(BULIBS)
478 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
480 windmc_SOURCES = windmc.c mcparse.y mclex.c \
482 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
484 dllwrap_SOURCES = dllwrap.c version.c
485 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
488 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
489 syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
490 mcparse.h mcparse.c embedspu.sh
492 diststuff: $(EXTRA_DIST) info
495 # development.sh is used to determine -Werror default.
496 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
498 EXTRA_DEJAGNU_SITE_CONFIG = development.exp
500 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
503 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
504 binutils.log binutils.sum abcdefgh*
508 .PHONY: install-exec-local
510 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
511 @list='$(RENAMED_PROGS)'; for p in $$list; do \
512 if test -f $$p$(EXEEXT); then \
513 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
514 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
517 $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
518 for i in $(TOOL_PROGS); do \
519 if [ -f $$i$(EXEEXT) ]; then \
520 j=`echo $$i | sed -e 's/-new//'`; \
521 k=`echo $$j | sed '$(transform)'`; \
522 if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
523 rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
524 ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
525 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \