1 Mon Feb 12 14:19:59 1996 Ian Lance Taylor <ian@cygnus.com>
3 * ieee.c: Extensive changes to write code to put types in the
4 global type block when possible, to output ranges for all memory
5 occupied by the module, and to improve efficiency.
7 * debug.c (struct debug_handle): Remove class_mark field. Add
8 id_list and compare_list fields.
9 (struct debug_class_id): Define.
10 (struct debug_type_compare_list): Define.
11 (debug_write): Initialize info->id_list
12 (debug_write_name): Remove reference to info->class_mark.
13 (debug_write_type): Get id for all structs and classes. Simplify
14 test for whether struct has already been written.
15 (debug_write_class_type): Get id for all classes. Simplify test
16 for whether class has already been written.
17 (debug_write_block): Don't write out blocks other than the top
18 level block if they have no local variables.
19 (debug_set_class_id): New static function.
20 (debug_type_samep): New static function.
21 (debug_class_type_samep): New static function.
22 * prdbg.c (pr_start_struct_type): Always print id.
23 (pr_start_class_type): Likewise.
24 (pr_tag_type): Likewise.
26 * stabs.c (struct stab_handle): Add syms and symcount fields.
27 (start_stab): Add syms and symcount parameters. Change all
29 (parse_stab_string): Look up global variables in the symbol table
30 to get the right value.
31 * budbg.h (start_stab): Update declaration.
32 * rddbg.c (read_section_stabs_debugging_info): Add syms and
33 symcount parameters. Change all callers.
35 * stabs.c (parse_stab_array_type): If the index type is 0, use
38 Wed Feb 7 14:17:45 1996 Ian Lance Taylor <ian@cygnus.com>
40 * ieee.c (ieee_start_compilation_unit): Clear modified and
41 modified_alloc fields of info.
43 * configure.in: Check for --enable-shared. Substitute new
44 variables BFDLIB and OPCODES.
46 * Makefile.in (BFDLIB): Set to @BFDLIB@.
47 (OPCODES): Set to @OPCODES@.
49 Mon Feb 5 16:18:42 1996 Ian Lance Taylor <ian@cygnus.com>
51 Support for building bfd and opcodes as shared libraries, based on
52 patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
53 * configure.in (HLDFLAGS): New substitution.
55 * Makefile.in (HLDFLAGS): New variable. Make all links use
56 $(HLDFLAGS) before $(CFLAGS) and $(LDFLAGS).
57 (BFDLIB_DEP): New variable. Replace all occurrences of $(BFD) as
58 a dependency with $(BFDLIB_DEP). Remove $(BFD) as a dependency if
59 there is also a dependency on $(ADDL_DEPS).
60 (BFDLIB): Rename from BFD; change all uses; set to -L../bfd -lbfd.
61 (OPCODES_DEP): New variable. Replace all occurrends of $(OPCODES)
62 as a dependency with $(OPCODES_DEP).
63 (OPCODES): Set to -L../opcodes -lopcodes.
64 (ADDL_DEPS): New variable. Replace all occurrences of
65 $(ADDL_LIBS) as a dependency with $(ADDL_DEPS).
66 (check): Set LD_LIBRARY_PATH in the environment.
67 (config.status): Depend upon BFD configure.host and config.bfd.
69 Fri Feb 2 17:02:59 1996 Doug Evans <dje@charmed.cygnus.com>
71 * objdump.c: #include stdarg.h or varargs.h.
72 (objdump_print_value): Change FILE* arg to struct disassemble_info*.
73 All callers updated. Use fprintf_func.
74 (objdump_print_address): Consistently use fprintf_func.
75 (objdump_sprintf): New function.
76 (disassemble_data): Print insn into a buffer, print raw insn ourselves,
77 then print insn mnemonic.
79 Fri Feb 2 16:48:55 1996 Ian Lance Taylor <ian@cygnus.com>
81 * configure: Regenerate.
83 Thu Feb 1 09:38:18 1996 Steve Chamberlain <sac@slash.cygnus.com>
85 * configure.in (i[3-6]86-*-win32): Becomes i[3-6]86-*-cygwin32.
86 (powerpc*-*-cygwin32): New.
87 * configure: Regenerated.
89 Wed Jan 31 13:22:03 1996 Richard Henderson <rth@tamu.edu>
91 * Makefile.in (distclean): Remove $(DEMANGLER_PROG).1.
93 Mon Jan 29 17:36:29 1996 Ian Lance Taylor <ian@cygnus.com>
95 Based on patches from H J Lu <hjl@zoom.com>:
96 * objcopy.c (remove_leading_char): New static variable.
97 (OPTION_REMOVE_LEADING_CHAR): Define.
98 (copy_usage): Mention --remove-leading-char.
99 (filter_symbols): If remove_leading_char, and the first character
100 of a global symbol matches the symbol leading char of the BFD,
101 remove the first character.
102 (copy_object): Filter the symbols if remove_leading_char is set.
103 (copy_main): Handle --remove-leading-char.
104 * binutils.texi, objcopy.1: Document --remove-leading-char.
106 Sat Jan 27 15:40:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
108 * objdump.c (fprintf): Add prototype to avoid compiler warning on
111 Fri Jan 26 11:53:42 1996 Ian Lance Taylor <ian@cygnus.com>
113 * binutils.texi (nm): Improve documentation on symbol types.
114 (objdump): Reference the stabs manual from the discussion of the
117 Thu Jan 25 11:21:46 1996 Raymond Jou <rjou@mexican.cygnus.com>
119 * mpw-make.sed: Add a "stamps" target.
121 Thu Jan 25 13:51:44 1996 Ian Lance Taylor <ian@cygnus.com>
123 * objdump.c (dump_headers, dump_section_header): Change objdump -h
124 output to be simpler and to include section file offsets.
126 Wed Jan 24 12:06:05 1996 Ian Lance Taylor <ian@cygnus.com>
128 * stabs.c (parse_stab_members): Don't adjust voffset.
130 * ieee.c (ieee_read_cxx_class): Don't multiply voffset by 4.
131 (struct ieee_write_type): Add name field.
132 (struct ieee_type_class): Remove name field. Change all uses to
133 use new name field in type instead.
134 (struct ieee_name_type): Likewise.
135 (ieee_start_struct_type): Initialize name field of type.
136 (ieee_start_class_type): Don't initialize classdef entry of tag.
137 (ieee_class_method_var): Don't adjust voffset.
138 (ieee_end_class_type): Likewise.
139 (ieee_tag_type): Initialize new name field of type.
140 (ieee_typdef): Set name after copying in type information.
142 * debug.c (VOFFSET_STATIC_METHOD): Define as -1, not 1.
144 * ieee.c (struct ieee_modified_type): Define.
145 (struct ieee_handle): Add modified and modified_alloc fields.
146 (ieee_get_modified_info): New static function.
147 (ieee_pointer_type): Cache type index.
148 (ieee_const_type): Likewise.
149 (ieee_volatile_type): Likewise.
151 * ieee.c (ieee_define_named_type): When creating a tag for an
152 anonymous struct, copy the name into memory.
153 (ieee_tag_type): Likewise.
154 * debug.c (debug_write_type): Only check and set id field for an
156 (debug_write_class_type): Likewise.
158 * ieee.c: Various changes to write out types for functions and
159 references, and to not write out unnecessary function types.
161 * ieee.c (struct ieee_var): Remove variable field. Add kind
162 field, and define some enum constants for it.
163 (parse_ieee_ty): Set kind field of variable for 'x' and 'X' types.
164 (parse_ieee_atn): Make an indirect slot for an external variable,
165 although we otherwise don't record it. Set kind field rather than
166 variable field of pvar.
167 (ieee_read_cxx_class): Try to get the type of a static member.
168 (ieee_read_reference): Check kind field rather than variable
171 Tue Jan 23 15:54:18 1996 Ian Lance Taylor <ian@cygnus.com>
173 * ieee.c: Various changes to handle reading C++ reference type
176 * debug.h (enum debug_var_kind): Add DEBUG_VAR_ILLEGAL.
177 (enum debug_parm_kind): Add DEBUG_PARM_ILLEGAL.
178 * debug.c (debug_get_parameter_types): Handle DEBUG_KIND_FUNCTION.
180 * ieee.c: Various changes to write out definitions of C++ classes.
182 * debug.c (debug_append_filename): Remove.
183 * debug.h (debug_append_filename): Don't declare.
185 * stabs.c (struct stab_handle): Remove last_type field. Add
186 so_string and so_value fields.
187 (finish_stab): Call stab_emit_pending_vars before calling
188 debug_end_function. Don't warn about pending variables.
189 (parse_stab): Accumulate N_SO strings until a non N_SO symbol is
190 seen, rather than calling debug_append_filename. Call
191 stab_emit_pending_vars before calling debug_end_function. Don't
194 Tue Jan 23 09:53:54 1996 Doug Evans <dje@charmed.cygnus.com>
196 * objdump.c (disassemble_data): Handle unknown endianness.
197 Pass fprintf to INIT_DISASSEMBLE_INFO.
199 Mon Jan 22 16:46:43 1996 Doug Evans <dje@charmed.cygnus.com>
201 Add new option --show-raw-insn.
202 * objdump.c (show_raw_insn): New global.
204 (long_options): Update.
205 (disassemble_data): Set disasm_info.flags if --show-raw-insn.
207 * objdump.c (disassemble_data): Set new arch,mach,endian fields in
210 Mon Jan 22 19:29:36 1996 Ian Lance Taylor <ian@cygnus.com>
212 * ieee.c: Extensive changes to pass a single info argument around
213 in the reading routines, rather than several arguments. Add code
214 to read C++ debugging records.
216 * debug.h (debug_get_type_size): Declare.
217 (debug_get_field_name): Declare.
218 (debug_get_field_bitpos): Declare.
219 (debug_get_field_bitsize): Declare.
220 (debug_get_field_visibility): Declare.
221 (debug_get_field_physname): Declare.
222 * debug.c (debug_get_real_type): Handle DEBUG_KIND_TAGGED.
223 (debug_get_type_size): New function.
224 (debug_get_field_name): New function.
225 (debug_get_field_bitpos): New function.
226 (debug_get_field_bitsize): New function.
227 (debug_get_field_visibility): New function.
228 (debug_get_field_physname): New function.
229 (debug_write_type): Make sure we pass the real kind, not INDIRECT,
230 to tag_type. Pass the name recursively for INDIRECT.
232 Fri Jan 19 12:31:57 1996 Ian Lance Taylor <ian@cygnus.com>
234 * debug.h (struct debug_write_fns): Remove ellipsis_type. Add int
235 and boolean parameters to function_type. Add boolean parameter to
237 (debug_make_ellipsis_type): Don't declare.
238 (debug_make_function_type): Add debug_type * and boolean
239 parameters. Change all callers.
240 (debug_make_method_type): Add boolean parameter. Change all
242 (debug_get_parameter_types): Add boolean * parameter. Change all
244 (debug_get_target_type): Declare.
245 * debug.c (struct debug_function_type): Add fields arg_types and
247 (struct debug_method_type): Add field varargs.
248 (debug_ellipsis_type, ELLIPSIS_P): Remove.
249 (debug_make_ellipsis_type): Remove.
250 (debug_make_function_type): Add arg_types and varargs parameters.
251 (debug_make_method_type): Add varargs parameter.
252 (debug_get_parameter_types): Add pvarargs parameter.
253 (debug_get_target_type): New function.
254 (debug_write_type): In case DEBUG_KIND_FUNCTION, push argument
255 types and pass count to function_type. In DEBUG_KIND_METHOD, use
256 a signed int for the count, don't call ellipsis_type, and pass
257 varargs to method_type.
258 * stabs.c (struct stab_demangle_info): Add varargs field.
259 (stab_demangle_argtypes): Add pvarargs parameter. Change all
261 (stab_demangle_args): Likewise.
262 (stab_demangle_type): In case 'F', pick up argument types.
263 * prdbg.c (pr_ellipsis_type): Remove.
264 (pr_function_type): Add argcount and varargs parameters.
265 (pr_method_type): Add varargs parameter.
266 * ieee.c (ieee_ellipsis_type): Remove.
267 (ieee_function_type): Add argcount and varargs parameters.
268 (ieee_method_type): Add varargs parameter. Remove most of
269 function body, and just call ieee_function_type.
271 * stabs.c: Include "demangle.h". Added several new static
272 functions not listed below to demangle argument types; they are
273 all called via stab_demangle_argtypes.
274 (finish_stab): If the kind of an undefined tag is
275 DEBUG_KIND_ILLEGAL, use DEBUG_KIND_STRUCT instead. Warn if there
276 are any pending variable.
277 (parse_stab): Don't close the function when the block depth goes
278 to zero. Pass value to debug_end_function.
279 (parse_stab_string): In case 'T', pass the name to
281 (parse_stab_type): In case 'x', use stab_find_tagged_type. In
282 case '#', handle functions with variable numbers of arguments.
283 (parse_stab_struct_type): Add tagname parameter. Change all
285 (parse_stab_members): Add tagname and typenums parameters. Change
286 all callers. If the type of a method is a stub, call
287 parse_stab_argtypes to demangle the argument types and get the
288 physical name of the function.
289 (parse_stab_argtypes): New static function.
290 (stab_record_variable): For a DEBUG_GLOBAL or DEBUG_STATIC
291 variable, call debug_record_variable immediately.
292 (stab_find_tagged_type): New static function.
294 * debug.h (enum debug_type_kind): Add DEBUG_KIND_ILLEGAL.
295 (struct debug_write_fns): Add field ellipsis_type. Add id
296 parameter to start_struct_type, start_class_type, and tag_type.
297 (debug_make_ellipsis_type): Declare.
298 (debug_find_named_type): Declare.
299 (debug_get_type_kind): Declare.
300 (debug_get_return_type): Declare.
301 (debug_get_parameter_types): Declare.
302 (debug_get_fields): Declare.
303 (debug_get_field_type): Declare.
304 * debug.c (struct debug_handle): Add fields class_id and base_id.
305 (struct debug_class_type): Add field id.
306 (struct debug_method_variant): Rename argtypes to physname.
308 (debug_ellipsis_type): New static variable.
309 (ELLIPSIS_P): New macro.
310 (debug_make_ellipsis_type): New function.
311 (debug_make_method_variant): Rename argtypes to physname.
312 (debug_make_static_method_variant): Likewise.
313 (debug_name_type): Always put types in the global namespace.
314 (debug_find_named_type): New function.
315 (debug_find_tagged_type): Treat DEBUG_KIND_ILLEGAL specially,
316 rather than DEBUG_KIND_VOID.
317 (debug_get_real_type): New static function.
318 (debug_get_type_kind): New function.
319 (debug_get_return_type): New function.
320 (debug_get_parameter_types): New function.
321 (debug_get_fields): New function.
322 (debug_get_field_type): New function.
323 (debug_write): Initialize base_id.
324 (debug_write_type): Pass new id argument to tag_type. Handle
325 DEBUG_KIND_ILLEGAL. Use id for DEBUG_KIND_STRUCT and
326 DEBUG_KIND_UNION. Handle ellipsis for method arguments.
327 (debug_write_class_type): Don't dereference kclass if it is NULL.
329 * prdbg.c (pr_fns): Add pr_ellipsis_type.
330 (pr_ellipsis_type): New static function.
331 (pr_pointer_type): If this is a pointer to an array, parenthesize
333 (pr_start_struct_type): Add id parameter.
334 (pr_start_class_type): Likewise.
335 (pr_tag_type): Likewise.
336 (pr_fix_visibility): Add the visibility to the top of the stack,
337 not the second element on the stack.
338 (pr_struct_field): Pop the stack before calling pr_fix_visibility.
339 (pr_class_static_member): Likewise.
340 (pr_class_start_method): Don't push a type, just set the method
341 name in the type on the top of the stack.
342 (pr_class_end_method): Don't pop the stack.
343 (pr_class_method_variant): Rename argtypes parameter to physname.
344 Append const and volatile rather than prepending them. Add a
345 space after the physname.
346 (pr_class_static_method_variant): Likewise.
347 * ieee.c (ieee_fns): Add ieee_ellipsis_type.
348 (ieee_define_named_type): Use DEBUG_KIND_ILLEGAL rather than
350 (write_ieee_debugging_info): Likewise.
351 (ieee_typdef): Likewise.
352 (ieee_ellipsis_type): New static function.
353 (ieee_start_struct_type): Add id parameter.
354 (ieee_start_class_type): Likewise.
355 (ieee_tag_type): Likewise.
356 (ieee_class_method_variant): Rename name to physname.
357 (ieee_class_static_method_variant): Likewise.
359 * Makefile.in (DEBUG_OBJS): Remove prdbg.o.
360 ($(OBJDUMP_PROG)): Depend upon, and link against, prdbg.o.
362 Thu Jan 18 17:35:06 1996 Kim Knuttila <krk@cygnus.com>
364 * dlltool.c (make_tail): Changed the order of the sections to avoid
365 an alignment problem.
367 Wed Jan 17 14:23:00 1996 J.T. Conklin <jtc@rtl.cygnus.com>
369 * srconv.c (wr_du): Set du.stackfrmt to 0.
370 (wr_un, wr_sc): Emit all sections, even those with 0 size.
372 Tue Jan 16 16:15:49 1996 J.T. Conklin <jtc@rtl.cygnus.com>
374 * srconv.c (wr_hd): Space size within segment was being
375 stored in segment identifier field.
377 Tue Jan 16 12:07:25 1996 Stan Shebs <shebs@andros.cygnus.com>
379 * mpw-config.in (BUILD_NLMCONV, BUILD_SRCONV, SYSINFO_PROG,
380 BUILD_DLLTOOL): Put definitions for these into makefile when
381 configuring, instead of always clearing in mpw-make.sed.
382 * mpw-make.sed: Edit out any host_alias or target_alias settings,
383 fix pathname to BFD internal include files, remove dependency
386 Thu Jan 11 17:31:38 1996 Michael Meissner <meissner@tiktok.cygnus.com>
388 * objdump.c (dump_section_header): Add new section flags
389 SEC_{EXCLUDE,SORT_ENTRIES}.
391 Thu Jan 11 11:45:34 1996 Ian Lance Taylor <ian@cygnus.com>
393 * objcopy.c (filter_symbols): NULL terminate the output symbols.
394 (copy_object): Allocate space for a possible extra NULL pointer.
396 * debug.c (debug_make_undefined_tagged_type): Make sure we are
397 given a kind of type we can handle.
398 (debug_write_type): Handle undefined enums and structs.
399 (debug_write_class_type): Handle undefined classes.
400 * prdbg.c (pr_enum_type): Handle an undefined enum.
401 * ieee.c (ieee_enum_type): Likewise.
403 Wed Jan 10 15:33:18 1996 Ian Lance Taylor <ian@cygnus.com>
405 * Makefile.in: Updated dependencies.
406 (ALLOCA, MALLOC): Remove variables.
407 (ADDL_LIBS): Remove $(MALLOC) from definition.
408 * alloca.c, gmalloc.c: Remove.
410 Mon Jan 8 18:02:29 1996 Ian Lance Taylor <ian@cygnus.com>
412 * ieee.c: Add global function write_ieee_debugging_info and a
413 bunch of static functions and structs used to write out IEEE
414 debugging information.
415 * budbg.h (write_ieee_debugging_info): Declare.
417 * ieee.c (struct ieee_type): Add pslot field.
418 (enum builtin_types): Define.
419 (ieee_builtin_type): For a pointer, return a pointer to the named
420 type. Use enum values rather than numbers.
421 (ieee_alloc_type): New static function.
422 (ieee_read_type_index): Use ieee_alloc_type.
423 (parse_ieee_bb): Likewise.
424 (parse_ieee_ty): Likewise. Use ieee_builtin_type for array range,
425 rather than making a new integer type. Store the new type in the
426 slot, if there is one.
427 (parse_ieee_atn): Treat ATN10 as defining a register variable.
428 (ieee_regno_to_genreg): Rename from ieee_regno_to_gen. Change all
430 (ieee_genreg_to_regno): New static function.
432 * stabs.c (parse_stab_type): Add new typename parameter. Change
434 (parse_stab_range_type): Add new typename parameter. Change all
437 * debug.h (struct debug_write_fns): Add tag parameter to
438 enum_type, start_struct_type, and start_class_type.
439 * debug.c (debug_write_type): Pass any tag name to
440 start_struct_type, debug_write_class_type, and enum_type. If
441 DEBUG_KIND_TAGGED, pass the name in the recursive call.
442 (debug_write_class_type): Accept a new tag parameter, and pass it
444 * prdbg.c (pop_type): Don't remove '+' character.
445 (pr_enum_type): Accept and use tag parameter.
446 (pr_start_struct_type): Likewise.
447 (pr_start_class_type): Likewise.
448 (pr_class_baseclass): Adjust algorithm used to find where to put
450 (pr_tag): Don't bother to insert the tag name.
452 * objcopy.c: Include budbg.h.
453 (convert_debugging): New static variable.
454 (OPTION_DEBUGGING): Define.
455 (copy_options): Add "debugging".
456 (copy_usage): Mention --debugging.
457 (is_strip_section): Skip debugging sections if convert_debugging.
458 (setup_section, copy_section): Likewise.
459 (filter_symbols): Skip debugging symbols if convert_debugging.
460 (copy_object): If convert_debugging, read and write debugging
462 (write_debugging_info): New static function.
463 (copy_main): Handle --debugging.
464 * Makefile.in (DEBUG_OBJS): New variable.
465 ($(OBJCOPY_PROG)): Depend upon and link against $(DEBUG_OBJS).
466 ($(STRIP_PROG)): Likewise.
467 (OBJDUMP_OBJS): Remove variable.
468 ($(OBJDUMP_PROG)): Use objdump.o $(DEBUG_OBJS) rather than
470 * binutils.texi, objcopy.1: Document --debugging.
472 Thu Jan 4 16:31:21 1996 Ian Lance Taylor <ian@cygnus.com>
474 * ieee.c: New file with code to read IEEE debugging information.
475 * budbg.h (parse_ieee): Declare.
476 * rddbg.c (read_debugging_info): Handle IEEE flavour files.
477 (read_ieee_debugging_info): New static function.
478 * Makefile.in: Rebuild dependencies.
479 (CFILES): Add ieee.c.
480 (OBJDUMP_OBJS): Add ieee.o.
482 * bucomm.h (xrealloc): Change type of first parameter from char *
485 Tue Jan 2 17:44:07 1996 Ian Lance Taylor <ian@cygnus.com>
487 * Makefile.in: Add targets to automatically rebuild dependencies.
488 Remove targets which just listed dependencies of .o files.
490 (HFILES, GENERATED_HFILES): New variables.
491 (CFILES, GENERATED_CFILES): New variables.
492 (underscore.c): Don't do anything, just depend upon stamp-under.
493 (stamp-under): New target; do what underscore.c used to do.
494 (nlmconv.o): Depend upon sym.h and ecoff.h.
495 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
496 (stage1, stage2, stage3, against, comparison): Remove.
497 (de-stage1, de-stage2, de-stage3): Remove.
498 (clean, distclean): Remove stamp-under and dep.sed.
499 * dep-in.sed: New file.
501 Implement generic debugging support. Implement a stabs reader and
503 * budbg.h, debug.c, debug.h, prdbg.c, rddbg.c, stabs.c: New files.
504 * objdump.c: Include "debug.h" and "budbg.h".
505 (dump_debugging): New global variable.
506 (usage): Mention --debugging.
507 (long_options): Add "debugging".
508 (display_bfd): Handle --debugging.
509 * Makefile.in (OBJDUMP_OBJS): New variable.
510 ($(OBJDUMP_PROG)): Use $(OBJDUMP_OBJS).
511 * binutils.texi, objdump.1: Document --debugging.
513 Sat Dec 30 09:59:51 1995 Jeffrey A Law (law@cygnus.com)
515 * nm.c ( long_options): Add "--defined-only" option.
516 (usage): Update for new "--defined-only" option.
517 (filter_symbols): Handle "--defined-only".
519 Fri Dec 29 16:04:56 1995 Ian Lance Taylor <ian@cygnus.com>
521 * arparse.y: Include "bucomm.h", not <sysdep.h>.
522 * nlmheader.y: Don't include "sysdep.h".
524 Tue Dec 26 18:23:18 1995 Ian Lance Taylor <ian@cygnus.com>
526 * nm.c (print_symdef_entry): Check return value of
527 bfd_get_elt_at_index.
529 Sat Dec 23 11:03:16 1995 Michael Meissner <meissner@tiktok.cgynsu.com>
531 * configure.in (DLLTOOL_DEFS): Build dlltool for PowerPC if target
532 is powerpc*-*-win* in addition to powerpc*-*-*pe*.
534 Fri Dec 15 16:30:57 1995 Ian Lance Taylor <ian@cygnus.com>
536 * objdump.c (endian_string): New static function.
537 (display_target_list): Use it.
538 * nlmconv.c (main): Use new bfd_big_endian macro.
540 Fri Dec 15 07:51:34 1995 steve chamberlain <sac@slash.cygnus.com>
542 * dlltool.c (fill_ordinals): Start from 1 if no other instructions
545 Tue Dec 12 12:05:21 1995 Ian Lance Taylor <ian@cygnus.com>
547 * Makefile.in (clean): Remove $(DEMANGLER_PROG).1. From Ronald
548 F. Guilmette <rfg@monkeys.com>.
550 Mon Dec 11 14:33:05 1995 Stan Shebs <shebs@andros.cygnus.com>
552 * mac-binutils.r: Fix copyright and version strings.
554 * Makefile.in (version): Remove, no longer used.
556 Fri Dec 1 14:41:56 1995 Stan Shebs <shebs@andros.cygnus.com>
558 * mpw-make.sed (install, install-only): Edit in Mac-specific
561 Thu Nov 30 20:26:02 1995 Kim Knuttila <krk@cygnus.com>
563 * dlltool.c (ppc_jtab): The binary glue for PowerPC dll linkage,
564 including the return instruction.
565 sinfo: added a preferred alignment field.
566 (secdata): section data for the PowerPC version.
567 (make_one_lib_file): More symbols, More sections (pdata, rdata)
568 (make_tail): Use idata$6 instead of idata$7 for ppc. Also added a
569 NULL idata$3 descriptor (temporary).
571 Tue Nov 28 17:23:44 1995 Doug Evans <dje@canuck.cygnus.com>
573 * dlltool.c (fill_ordinals): Don't reference d_export_vec if
574 there are no exported functions.
576 Mon Nov 27 13:05:59 1995 Ian Lance Taylor <ian@cygnus.com>
578 * configure: Regenerate with autoconf 2.7.
580 Wed Nov 22 13:17:15 1995 Ian Lance Taylor <ian@cygnus.com>
582 * dlltool.c (fill_ordinals): Start assigning ordinals at 1.
584 * Makefile.in (EXPECT): Use $$r, not $${rootme}.
585 (check): Set r, not rootme.
587 Tue Nov 21 18:04:09 1995 Ian Lance Taylor <ian@cygnus.com>
589 * configure.in: Use BFD_NEED_DECLARATION.
590 * acconfig.h: Put NEED_DECLARATION_FPRINTF in @TOP@ section.
591 * configure, config.in: Rebuild with autoconf 2.6.
593 Fri Nov 17 10:34:37 1995 Ian Lance Taylor <ian@cygnus.com>
595 * Makefile.in (CC_FOR_TARGET): Use @host@ and @target@, not
596 $(host_canonical) and $(target_canonical).
598 Thu Nov 16 03:39:20 1995 Ken Raeburn <raeburn@cygnus.com>
600 Version 2.6 released.
601 * Makefile.in (VERSION): Update to 2.6.
603 Wed Nov 15 12:14:17 1995 Ian Lance Taylor <ian@cygnus.com>
605 * Makefile.in (CC_FOR_TARGET): Define.
606 (check): Pass CC and CFLAGS to runtest.
608 * nm.c (display_rel_file): Don't require a DYNAMIC object when
609 dumping the dynamic symbol table.
611 * objdump.c (compare_symbols): Sort global symbols before local
612 symbols before debugging symbols.
613 (objdump_print_address): Don't futz around looking for a global
614 symbol with the same value.
616 Tue Nov 14 17:19:11 1995 Ian Lance Taylor <ian@cygnus.com>
618 * dlltool.c: Use FOPEN_* macros rather than "r" or "w".
620 * dlltool.c (fill_ordinals): Correct memset call.
622 Sun Nov 12 12:56:05 1995 Stan Shebs <shebs@andros.cygnus.com>
624 * mpw-make.sed (DEMANGLER_PROG): Edit out attempts to do anything
627 Fri Nov 10 11:41:22 1995 Ian Lance Taylor <ian@cygnus.com>
629 * objcopy.c (setup_section): Copy the section lma independently of
632 Wed Nov 8 11:33:00 1995 Ian Lance Taylor <ian@cygnus.com>
634 * arsup.c (ar_open): Cast malloc return value.
636 Tue Nov 7 09:01:26 1995 Kim Knuttila <krk@cygnus.com>
638 * configure.in, configure (DLLTOOL_DEFS): Added ppc target.
639 * dlltool.c (MPPC): Added basic PPC definitions.
641 Tue Nov 7 14:02:57 1995 Ian Lance Taylor <ian@cygnus.com>
643 * configure.in: Don't treat rs6000-*-lynx* specially.
644 * configure: Rebuild.
645 * config/rslynx: Remove.
646 * Makefile.in: Remove @target_makefile_fragment@.
648 Mon Nov 6 15:00:50 1995 Ian Lance Taylor <ian@cygnus.com>
650 * bucomm.h: Include <sys/types.h>.
651 * ar.c: Don't include <sys/types.h> or <stdio.h>.
652 * bucomm.c, dlltool.c, nlmconv.c, objcopy.c, objdump.c: Likewise.
654 Fri Nov 3 12:38:09 1995 Ian Lance Taylor <ian@cygnus.com>
656 * objdump.c: Include <sys/types.h>.
658 Permit user to override DEMANGLER_PROG from command line. From
659 Manfred Hollstein <manfred@lts.sel.alcatel.de>.
660 * Makefile.in ($(DEMANGLER_PROG)): Depend upon
662 (install): Don't depend upon $(DEMANGLER_PROG).1. Only install
663 $(DEMANGLER_PROG).1 if $(DEMANGLER_PROG) is not empty.
665 Wed Nov 1 15:04:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
667 * Makefile.in (syslex.o): add -I$(srcdir) if compiling in a
670 Mon Oct 30 14:24:18 1995 Ian Lance Taylor <ian@cygnus.com>
672 * objdump.c (objdump_print_value): New static function.
673 (objdump_print_address): Use it. If we need the right section for
674 the symbol, and we can't find it, print an offset from the section
675 rather than using a symbol from some other section.
677 Thu Oct 26 10:23:14 1995 steve chamberlain <sac@slash.cygnus.com>
679 * dlltool.c (no_idata4, no_idata5): New.
680 (arm_jtab): Use correct encoding of jump instruction.
681 (usage, main, make_head, make_tail): Act on no_idata4, no_idata5.
683 Wed Oct 25 12:10:07 1995 Stan Shebs <shebs@andros.cygnus.com>
685 * mpw-make.sed: Edit paths to generated y.tab.[ch] files.
687 Fri Oct 20 18:40:34 1995 Ian Lance Taylor <ian@cygnus.com>
689 * binutils.texi: Change --with-targets to --enable-targets.
691 Thu Oct 19 17:47:41 1995 Fred Fish <fnf@cygnus.com>
693 * Makefile.in: Remove extraneous tab on otherwise empty line,
694 which confuses many non-GNU versions of "make".
696 Wed Oct 18 16:31:58 1995 steve chamberlain <sac@slash.cygnus.com>
698 * dlltool.c (i386_jtab, arm_jtab): New
699 (gen_lib_file): Rewritten to use bfd.
701 Fri Oct 13 16:10:07 1995 Michael Meissner <meissner@tiktok.cygnus.com>
703 * Makefile.in (install): Don't give error message if dlltool
706 Fri Oct 13 11:04:37 1995 steve chamberlain <sac@slash.cygnus.com>
708 * deflex.l: Allow quoting of IDs.
709 * defparse.y (%union): string deleted.
710 (command): DESCRIPTION takes ID.
711 * dlltool.c (gen_def_file): Quote outgoing name if
712 necessary. Preserve NONAME.
713 (gen_lib_file): Run ranlib.
714 (workout_prefix): Deleted.
715 (main, usage, long_options): Add --as, --ranlib, --ar options.
717 Wed Oct 11 13:36:13 1995 steve chamberlain <sac@slash.cygnus.com>
719 * dlltool.c (mtable): HOW_ALIGN_LONG, new.
721 (d_low_ord, d_high_ord, d_named_funcs): New.
722 (gen_exp_file): Create noname entries correctly.
723 (gen_lib_file): Dump exports alphabetically.
724 (process_duplicates): Count nonamed functions.
725 (fill_ordinals): Keep track of highest ord too.
726 (mangle_defs): Create alphabetically ordered list of names.
728 Tue Oct 10 09:39:09 1995 steve chamberlain <sac@slash.cygnus.com>
730 * Makefile.in (TOOL_PROGS): Include DLLTOOL_PROG.
732 Mon Oct 9 13:06:31 1995 steve chamberlain <sac@slash.cygnus.com>
734 * dlltool.c (add_underscore): New.
735 (xlate): Use new name.
736 (main, usage): Update.
738 Fri Oct 6 14:08:51 1995 Ken Raeburn <raeburn@cygnus.com>
740 * sysinfo.y: Eliminate unused terminals "[" and "]" and unused
741 nonterminal "name". One s/r conflict remains.
743 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
745 * nm.c (print_symname): Don't try to demangle an empty
747 * objdump.c (slurp_symtab): Reset symcount if there are
749 (slurp_dynamic_symtab): Likewise, for dynsymcount.
750 (disassemble_data): Fix memory leak: free sorted_syms when done.
751 (display_bfd): Likewise, for syms and dynsyms.
752 (dump_relocs): Don't print header before possibly generating an
754 (dump_dynamic_relocs): Likewise.
756 * ar.1, nm.1, objdump.1, size.1, strings.1, strip.1: Fix typos and
759 Fri Oct 6 12:00:25 1995 Ian Lance Taylor <ian@cygnus.com>
761 * ar.c (do_quick_append): Comment out.
762 (replace_members): Add quick argument.
763 (main): Don't call do_quick_append.
764 (open_inarch): Don't call quick_append to create an empty archive.
765 Instead call bfd_openw/bfd_set_format/bfd_close.
767 Thu Oct 5 20:53:08 1995 Ken Raeburn <raeburn@cygnus.com>
769 * bucomm.c: Always include time.h.
771 Thu Oct 5 17:25:21 1995 Ian Lance Taylor <ian@cygnus.com>
773 * objdump.c (compare_symbols): Sort gnu_compiled and gcc2_compiled
774 symbols after other symbols with the same value. Likewise for
775 symbols which look like file names.
776 (objdump_print_address): Always chose the first reasonable symbol
779 Tue Oct 3 22:38:55 1995 Ian Lance Taylor <ian@cygnus.com>
781 * arsup.c (ar_save): Use rename, not unlink/link/unlink.
783 Mon Oct 2 12:10:25 1995 Ian Lance Taylor <ian@cygnus.com>
785 * strings.c (main): Exit with zero status if no files are given
786 and standard input is read.
788 Thu Sep 28 20:03:07 1995 Stan Shebs <shebs@andros.cygnus.com>
790 * mpw-config.in: Calculate underscore and put into makefile
791 fragment, generate config.h.
792 * mpw-make.sed: New file, sed commands to edit Unix makefile
794 * mpw-make.in: Remove.
795 * mac-binutils.r: New file, Mac resources.
797 Thu Sep 28 15:49:00 1995 steve chamberlain <sac@slash.cygnus.com>
799 * dlltool.c: (gen_exp_file): Always emit a .reloc section if
803 (gen_lib_file): Use imp_name_lab.
804 (main): Initialize imp_name_lab.
806 Mon Sep 25 12:05:34 1995 Ian Lance Taylor <ian@cygnus.com>
808 * configure.in: Call AC_HEADER_SYS_WAIT.
809 * configure: Rebuild.
810 * config.in: Rebuild.
811 * dlltool.c: Include "libiberty.h" and "bucomm.h". Don't include
812 <stdio.h>, <stdlib.h>, or <string.h>. Don't include <wait.h>.
813 Include <sys/types.h>. Use HAVE_SYS_WAIT_H to control whether to
814 include <sys/wait.h> or define the wait macros by hand. Don't
816 (gen_lib_file): Don't assume that sprintf returns the number of
817 characters; use strlen instead.
819 Fri Sep 22 17:16:41 1995 Ian Lance Taylor <ian@cygnus.com>
821 * objdump.c (disassemble_data): Don't use the old BFD based
822 disassembler interface. Make info a const pointer.
824 Wed Sep 13 18:33:44 1995 Ian Lance Taylor <ian@cygnus.com>
826 * objdump.c (start_address): New variable.
827 (stop_address): New variable.
828 (usage): Mention --start-address and --stop-address.
829 (OPTION_START_ADDRESS, OPTION_STOP_ADDRESS): Define.
830 (long_options): Add "start-address" and "stop-address".
831 (disassemble_data): Handle start_address and stop_address.
832 (dump_data, dump_reloc_set): Likewise.
833 (main): Don't set seenflag for -l. Handle OPTION_START_ADDRESS
834 and OPTION_STOP_ADDRESS.
835 * objcopy.c (parse_vma): Move to bucomm.c.
836 * bucomm.c (parse_vma): New function, moved in from objcopy.c.
837 * bucomm.h (parse_vma): Declare.
838 * binutils.texi, objdump.1: Document new objdump options.
840 Tue Sep 12 12:37:39 1995 Ian Lance Taylor <ian@cygnus.com>
842 * Makefile.in (maintainer-clean): New target.
844 * ar.c (replace_members): Don't call write_archive if nothing
847 * objdump.c (disassemble_data): Add casts to avoid gcc warnings.
849 Thu Sep 7 12:12:17 1995 Ian Lance Taylor <ian@cygnus.com>
851 * config.in: Rename from config.h.in.
852 * configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
853 Check for config.h:config.in when creating stamp-h.
854 * configure: Rebuild.
855 * Makefile.in (stamp-h): Depend upon config.in rather than
856 config.h.in. Set CONFIG_HEADERS to config.h:config.in when
857 calling config.status.
859 * Makefile.in (distclean): Remove config.h, stamp-h, and
862 * nm.c (value_format): Initialize based on BFD64 and
864 (print_radix): New static variable.
865 (set_print_radix): Set print_radix. Adjust changes to
867 (print_value): New static function, to print 64 bit octal and
868 decimal values correctly.
869 (print_symbol_info_bsd): Check BFD64, not BFD_HOST_64_BIT. Use
871 (print_symbol_info_sysv): Use print_value.
872 (print_symbol_info_posix): Likewise.
874 Wed Sep 6 15:02:55 1995 Ian Lance Taylor <ian@cygnus.com>
876 * Makefile.in (*.o): Remove incorrect dependencies on
877 $(BFDDIR)/hosts/std-host.h.
879 * Makefile.in (INSTALL_DATA): Add -m 644.
880 (INSTALL_XFORM1): Likewise.
881 (CC_FOR_BUILD): Set to @CC_FOR_BUILD@ rather than $(CC).
882 (mostlyclean): Remove config.log.
883 (distclean): Remove config.cache.
885 * configure.in: Call BFD_CC_FOR_BUILD and BFD_BINARY_FOPEN.
886 * configure: Rebuild.
888 Tue Sep 5 20:22:42 1995 Ian Lance Taylor <ian@cygnus.com>
890 * configure.in: Rewrite to use autoconf.
891 * aclocal.m4: New file.
892 * configure: New file, built by autoconf.
893 * acconfig.h: New file.
894 * config.h.in: New file, built by autoheader.
895 * Makefile.in: Various changes for new configure script. Also:
896 (PROGS): Remove $(SYSINFO_PROG).
897 (ALL_CFLAGS): Remove $(TDEFINES).
898 (version.o): Use $(ALL_CFLAGS).
899 (cplus-dem.o, dlltool.o, nlmconv.o): Likewise.
900 (sysdump.o): Depend upon bucomm.h and config.h.
901 (srconv.o, arsup.o, strings.o): Depend upon config.h.
902 (filemode.o): Don't depend upon ../bfd/sysdep.h.
903 (bucomm.o): Depend upon config.h, not ../bfd/sysdep.h.
904 (size.o, objdump.o, nm.o, ar.o, objcopy.o): Likewise.
905 (nlmheader.o, nlmconv.o): Likewise.
906 (distclean): Don't remove sysdep.h.
907 * bucomm.h: Include "ansidecl.h", <stdio.h>, and "config.h".
908 Include "fopen-same.h" or "fopen-bin.h", based on
909 USE_BINARY_FOPEN. Include <errno.h>, and declare errno if it is
910 not a macro. Include <unistd.h>, <string.h>, <strings.h>,
911 <stdlib.h>, and <fcntl.h> if they are present. Declare strchr,
912 strrchr, and strstr if no string header file exists. Include
913 <sys/file.h> if it exists and <fcntl.h> does not. Define
914 O_RDONLY and O_RDWR if necessary.
915 * ar.c: Don't include "sysdep.h". Do include <sys/types.h> and
916 <sys/stat.h>. Use HAVE_GOOD_UTIME_H rather than POSIX_UTIME. Use
917 HAVE_UTIMES rather than !USE_UTIME. Don't include <errno.h>, and
919 * arsup.c: Don't include <sysdep.h>.
920 * bucomm.c: Don't include "sysdep.h". Include <stdio.h>,
921 <sys/types.h>, and <sys/stat.h>. Include <time.h> if it defines
922 time_t. Define time_t if necessary.
923 * coffdump.c: Don't include "sysdep.h".
924 * coffgrok.c, filemode.c, nlmconv.c, size.c: Likewise.
925 * srconv.c, strings.c: Likewise.
926 * nm.c: Don't include "sysdep.h". Don't try to define HAVE_SBRK.
927 * objcopy.c: Don't include "sysdep.h". Include <sys/types.h> and
929 (simple_copy): Use creat rather than assuming that O_CREAT is
931 * objdump.c: Don't include "sysdep.h". Use
932 NEED_DECLARATION_PRINTF rather than !FPRINTF_ALREADY_DECLARED.
933 * sysdump.c: Include "bfd.h" and "bucomm.h". Don't include
934 "sysdep.h" or <stdlib.h>.
935 (dump_symbol_info): Rename from symbol_info. Change all callers.
937 Mon Sep 4 14:30:00 1995 Ian Lance Taylor <ian@cygnus.com>
939 * configure.in (host_makefile_frag): Don't set. Substitute for
940 @CC@, @CFLAGS@, @HDEFINES@ and @LDFLAGS@ in Makefile.
941 * Makefile.in (AR_FLAGS): Set to rc rather than qv.
942 (CC): Define as @CC@.
943 (CFLAGS): Set to @CFLAGS@.
944 (LDFLAGS): Define as @LDFLAGS@.
945 (ALL_CFLAGS): Use @HDEFINES@ rather than $(HDEFINES).
947 * configure.in: Don't bother to call config.bfd for each target.
948 Just call it for the default target, and use the shell variable to
949 decide whether underscores are used.
951 Thu Aug 31 19:21:48 1995 Jason Molenda (crash@phydeaux.cygnus.com)
953 * configure.in: match i[3-6]86-*-win32, not just i386-*-win32.
955 Thu Aug 31 16:30:22 1995 steve chamberlain <sac@slash.cygnus.com>
957 * dlltool.c (add_indirect): New.
959 (gen_exp_file): Timestamp should be 0. Insert prefix when
960 needed. New code for indirection.
961 (gen_lib_file): Timestamp should be 0. Insert prefix
963 (usage): Document --add-indirect.
964 (main): Cope with new option.
966 * objdump.c (dump_private_headers): New.
967 (usage): Document new option.
968 (long_option): Add private-headers.
969 (dump_bfd_private_header): New.
970 (main): Cope with new option.
972 Thu Aug 31 04:09:16 1995 Doug Evans <dje@canuck.cygnus.com>
974 * dlltool.c (run): Add missing 3rd arg to waitpid.
976 Wed Aug 30 11:02:11 1995 steve chamberlain <sac@slash.cygnus.com>
978 * Makefile.in (TOOL_PROGS): Include dlltool if needed.
980 Tue Aug 29 13:25:21 1995 steve chamberlain <sac@slash.cygnus.com>
982 * dlltool.c (rva): Deleted.
983 (rvaafter, rva_before): Use new assembler pseudo.
984 (flush_page, gen_exp_file, gen_lib_file): Use new way of RVAing.
985 (gen_exp_file): Don't generate .edata if no need.
986 (gen_lib_file): Don't make timestamp.
987 Put _iname in idata$7.
988 (workout_prefix): Fix memory initialization bug.
989 (usage): Tidy up, delete many single char options.
990 (main): rva option is gone.
992 Mon Aug 21 18:41:28 1995 steve chamberlain <sac@slash.cygnus.com>
994 * dlltool.c (options): image-base is a synonym for rva.
995 (gen_lib_file): Put dll name into ibase$7.
997 Sun Aug 20 09:59:00 1995 steve chamberlain <sac@slash.cygnus.com>
999 Modified to generate archives and objects rather than .s files.
1000 * dlltool.c (run) New function.
1001 (gen_exp_file, gen_lib_file): Use run.
1002 (workout_prefix): New.
1003 (usage): Document new options.
1004 (main): Parse new options.
1006 Wed Aug 16 16:26:52 1995 steve chamberlain <sac@slash.cygnus.com>
1008 * dlltool.c (gen_exp_file): Fix RVA handling.
1009 (rva_s, rva_n): Delete.
1011 Fri Aug 11 18:27:18 1995 Ian Lance Taylor <ian@cygnus.com>
1013 * nm.c (main): Ignore -e.
1015 Thu Aug 10 17:35:00 1995 Ken Raeburn <raeburn@cygnus.com>
1017 * Makefile.in (config.texi): New target. Write out a setting for
1018 texinfo variable VERSION.
1019 (binutils.dvi, binutils.info): Depend on it.
1020 * binutils.texi: Include it, and reference @value{VERSION} instead
1021 of explicitly specifying 2.2(!).
1023 Thu Aug 10 16:07:53 1995 Ian Lance Taylor <ian@cygnus.com>
1025 * coffgrok.c (do_type): Handle array dimensions the same way gdb
1028 Tue Aug 8 17:10:42 1995 steve chamberlain <sac@slash.cygnus.com>
1030 * dlltool.c (mtable): New fields.
1031 (ASM_RVA_BEFORE, ASM_RVA_AFTER): New.
1032 (flush_page): Use new macros.
1034 Sat Aug 5 00:16:37 1995 Jeff Law (law@snake.cs.utah.edu)
1036 * objcopy.c (mark_symbols_used_in_relocations): Handle sections
1037 with no relocations.
1038 * coffgrok.c (do_sections_p1): Likewise.
1040 Mon Jul 31 12:51:06 1995 Ian Lance Taylor <ian@cygnus.com>
1042 * strings.c (print_strings): For compatibility with existing
1043 strings programs, print strings which are not terminated with a
1044 null byte or a newline.
1045 * binutils.texi, strings.1: Update documentation accordingly.
1047 * ar.c (replace_members): For compatibility with existing ar
1048 programs, permit users to add the same file multiple times.
1050 Tue Jul 25 11:21:53 1995 Ian Lance Taylor <ian@cygnus.com>
1052 * strings.c (DATA_FLAGS): Remove SEC_DATA.
1053 (main): If no file names are given, scan standard input.
1054 * binutils.texi, strings.1: strings now scans non-data sections by
1057 Mon Jul 24 13:52:28 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1059 * srconv.c (wr_hd): Set afl field to 4 for bfd_arch_sh.
1060 (writeINT): When size == -2, use 2 bytes for the h8300 and 4 bytes
1063 * sysdump.c (fillup): Return size - 1, the last byte is a checksum
1064 and shouldn't be counted.
1065 * sysroff.info (hd): Changed segment identifier from a byte to a 1
1066 bit field. The sysroff 2.0-01 specification seems to be in error
1067 here. Reduce width of following "spare" field from 4 to 3 bits.
1068 (rl): Changed order and width of first 4 bitfields to correspond
1069 to sysroff specification.
1070 (dln_head, dln_inside, dln_tail): Removed.
1072 Tue Jul 18 23:00:03 1995 Fred Fish <fnf@cygnus.com>
1074 * nm.c (sort_symbols_by_size): Enclose expression being casted
1075 in parens so result is casted, not just first operand. Can't
1076 do pointer arithmetic on void* pointers.
1078 Fri Jul 14 13:42:42 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1080 * sysdump.c (dh): Changed format of output to be 16 hex digits
1081 followed by 16 ascii characters, similar to Emacs' hexl-mode,
1082 to make it easier to read.
1083 (xcalloc): fix typo.
1085 Thu Jul 13 15:27:44 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1087 * srconv.c (wr_tr): Write out handcrafted tr block.
1088 (walk_tree_symbol): Use evallen and evalue instead of
1089 vallen & value because of corresponding changes in
1092 * sysdump.c (sysroff_swap_tr_in, sysroff_print_tr_out): New
1095 * sysroff.info (tr): the tr block is a special case --- a block
1096 without contents --- which can't be handled by generated code.
1097 (den, dpp): only first byte is present for DENend, DPPend.
1098 (dsy): describe a conditional portion of block, rename some fields.
1099 (dps): describe a conditional portion of block.
1102 * sysinfo.y (yyerror): write error message to standard error.
1104 Thu Jul 13 10:43:59 1995 Ian Lance Taylor <ian@cygnus.com>
1106 * Makefile.in (DISTSTUFF): Add arparse.h and sysinfo.h.
1107 (mostlyclean): Remove y.output.
1108 (clean): Remove sysroff, sysroff.c, sysroff.h, and sysinfo.
1110 * nlmconv.c (powerpc_mangle_relocs): Cast memset arg to size_t.
1111 * objcopy.c (copy_object): Likewise.
1113 * nm.c (HAVE_SBRK): Define execpt on amigados and WINDOWS_NT.
1114 (struct size_sym): Define.
1115 (show_stats): New static variable.
1116 (long_options): Add undocumented option "stats".
1117 (main): Print memory stats if requested.
1118 (sort_bfd, sort_dynamic, sort_x, sort_y): New static variables.
1119 (numeric_forward): Use minisymbols rather than asymbols.
1120 (non_numeric_forward): Likewise.
1121 (size_forward1): Rename from size_forward. Use minisymbols.
1122 (size_forward2): New static function.
1123 (sort_symbols_by_size): Take new arguments dynamic, size, and
1124 symsizep. Use minisymbols. Don't store the size back in the
1125 symbol; store in a newly allocate struct size_sym array.
1126 (display_rel_file): Read minisymbols rather than asymbols. Set
1127 sort_* variables. Call print_size_symbols if sorting by size.
1128 (filter_symbols): Take new arguments dynamic and size. Use
1130 (print_symbols): Likewise. Call print_symbol for actual printing.
1131 (print_size_symbols): New static function.
1132 (print_symbol): New static function.
1134 Wed Jul 12 10:43:05 1995 Ian Lance Taylor <ian@cygnus.com>
1136 * objdump.c (dump_section_stabs): Only print each stabs section
1138 (compare_relocs): Make it clear to gcc that this always returns a
1141 Wed Jul 12 10:40:23 1995 H.J. Lu <hjl@nynexst.com>
1143 * objcopy.c (simple_copy): Preserve errno on failure.
1144 (smart_rename): Print error mesage if simple_copy fails.
1146 Tue Jul 11 13:10:52 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1148 * sysdump.c: re-indented file.
1149 (module): read blocks sequentially instead of trying to parse
1150 them, as that would require changing the parser recognize the
1151 difference between a DPSstart and DPSend block.
1152 (getone): Add break's between switch blocks as appropriate.
1153 (object_body_list): parse blocks according to sysroff spec.
1155 Mon Jul 10 12:37:25 1995 J.T. Conklin <jtc@poseidon.cygnus.com>
1157 * sysroff.info: re-indented file, prior formatting was confusing
1158 because it was indentation did not reflect nesting of conditional
1159 records. Change "space size within segment" record in hd record
1162 * sysinfo.y (cond_it_field): Use xcalloc instead of calloc.
1164 * srconv.c (wr_cs): Reformatted cs header array, tag each byte
1165 with a comment describing the field.
1166 (wr_unit_info): Use SEEK_SET macro instead of constant 0.
1167 (main): Use FOPEN_WB macro instead of literal "wb".
1168 * sysroff.info: Remove fdl (dfl) field from cs block. Compare
1169 ptr->type with ED_TYPE_CONST instead of constant 2 in ed block.
1171 Tue Jul 4 14:48:42 1995 Ian Lance Taylor <ian@cygnus.com>
1173 * nm.c (size_forward): Check yf against yn, not xn.
1175 * objcopy.c (copy_archive): Record all output BFD's, and close
1176 them before unlinking them and removing the temporary directory,
1177 to avoid NFS problems.
1179 * ar.c (replace_members): In verbose messages, use 'r' when
1180 replacing a member, and 'a' when adding one.
1182 * ar.c (ar_truncate): New static variable.
1183 (normalize): Change return type to const char *. Add abfd
1184 argument. Change all callers. If ar_truncate, chop the filename
1185 to abfd->ar_max_namelen.
1186 (main): For the 'f' modifier, set ar_truncate to true. Don't
1187 change quick_append to replace if ar_truncate is true.
1188 (do_quick_append): If ar_truncate, set BFD_TRADITIONAL_FORMAT.
1189 (write_archive): Likewise.
1190 * binutils.texi, ar.1: Document 'f' modifier.
1192 * objcopy.c (enum strip_action): Define strip_unneeded.
1193 (OPTION_STRIP_UNNEEDED): Define.
1194 (strip_options): Add "strip-unneeded".
1195 (copy_options): Likewise.
1196 (copy_usage): Mention --strip-unneeded.
1197 (strip_usage): Likewise.
1198 (is_strip_section): Strip debugging sections if strip_unneeded.
1199 (filter_symbols): If strip_unneeded, only keep BSF_KEEP symbols.
1200 (copy_object): If strip_all, discard symbols without checking
1202 (copy_object): Call filter_symbols if strip_unneeded.
1203 (setup_section): Strip debugging sections if strip_unneeded.
1204 (copy_section): Likewise.
1205 (strip_main): Handle OPTION_STRIP_UNNEEDED.
1206 (copy_main): Likewise.
1207 * binutils.texi, objcopy.1, strip.1: Document --strip-unneeded.
1209 Mon Jul 3 14:16:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
1211 * configure.in (i386-*-win32): New configuration.
1212 * dlltool.c (killat, xlate, usage, long_options, main):
1213 Understand and cope with -k option.
1215 Sat Jul 1 12:25:15 1995 Fred Fish <fnf@cygnus.com>
1217 * ar.c: (extract_file): Change "#if POSIX_UTIME" to
1218 "#ifdef POSIX_UTIME" to match other tests of POSIX_UTIME
1219 and avoid lossage when POSIX_UTIME is not defined at all.
1221 Wed Jun 28 17:51:24 1995 Steve Chamberlain <sac@slash.cygnus.com>
1223 * ar.c: (print_contents.c, extract_file, do_quick_append):
1224 Malloc buffers rather than allocate on stack (so it works
1226 * deflex.l: Names can have an @ in them.
1227 * dlltool.c: Loads of stuff. Can now generate .imp files which
1230 Thu Jun 22 19:10:50 1995 Stan Shebs <shebs@andros.cygnus.com>
1232 * mpw-make.in (demangle.c.o): Remove.
1233 (arparse.h): Depend on arparse.c instead of arparse.y.
1235 Wed Jun 21 17:32:45 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1237 * Makefile.in (DISTSTUFF): Don't include info here.
1238 (diststuff): Include it here.
1239 (realclean): Remove *.info.
1241 * objdump.c (compare_relocs): If relocation entries have the same
1242 address, keep them in file order.
1244 Mon Jun 19 09:06:49 1995 Steve Chamberlain <sac@slash.cygnus.com>
1246 * dlltool.c: Change names of generated files. .*.s-> -*.s
1248 * objdump.c (dump_section_stabs): Check for names
1249 which are supersets of selected names.
1251 Wed Jun 14 19:43:52 1995 Doug Evans <dje@canuck.cygnus.com>
1253 * dlltool.c (mtable, ARM jump): Must redirect via pc offsetable ptr.
1255 Wed Jun 14 13:27:22 1995 Steve Chamberlain <sac@slash.cygnus.com>
1257 * deflex.l, defparse.y, dlltool.c: New files.
1258 * Makefile.in, configure.in: Support for them.
1260 Mon Jun 12 11:27:54 1995 Steve Chamberlain <sac@slash.cygnus.com>
1262 * sysdump.c: Include sysdep.h
1263 (main): Open input with FOPEN_RB.
1265 Fri Jun 9 17:26:11 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1267 * objdump.c (wide_output): New flag variable.
1268 (usage): Print new -w, --wide options.
1269 (long_options): Add --wide support.
1270 (dump_section_header): If --wide, don't print a newline between
1271 the section's first line and the flags.
1272 (objdump_print_address): Use unsigned comparisons for the binary
1274 (disassemble_data): If --wide, don't put a \n between the
1275 disassembly output and relocation information.
1276 (main): Support -w option being the same as --wide.
1278 Thu Jun 1 17:09:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1280 Sat May 6 08:52:24 1995 H.J. Lu (hjl@nynexst.com)
1282 * objcopy.c (smart_rename): make it smarter, clean up
1285 Tue May 30 14:24:15 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1287 * Makefile.in: Delete lines with lots of #### because four or more
1288 indicate a point for makefile fragment substitution.
1290 Tue May 9 17:17:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1292 * configure.in: Don't build nlmconv on PowerPC eabi any more, it
1295 Thu Apr 27 20:21:24 1995 Doug Evans <dje@canuck.cygnus.com>
1297 * Makefile.in (EXPECT): Define.
1298 (RUNTEST): Use one in source tree if present.
1299 (check): Set `rootme' for $(EXPECT).
1301 Wed Apr 26 18:26:21 1995 Steve Chamberlain <sac@slash.cygnus.com>
1303 * srconv.c (main): Add support for -n option which disables
1304 prescan of common symbols.
1305 (wr_ob): If reading past the end of a section, fill with zeros.
1307 Tue Apr 25 19:14:37 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1309 * objdump.c (dump_section_header): Display load address after
1310 virtual memory (run-time) address.
1312 Wed Apr 19 09:44:06 1995 Jason Merrill <jason@phydeaux.cygnus.com>
1314 * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
1316 (DEMANGLER_PROG): No longer uses version.o.
1318 Mon Apr 10 13:29:49 1995 Stan Shebs <shebs@andros.cygnus.com>
1320 Merge in support for Mac MPW as a host.
1321 (Old change descriptions retained for informational value.)
1323 * mpw-config.in (TDEFINES): Define as empty in makefile frag.
1325 * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
1327 * mpw-config.in: New file, MPW configure fragment for binutils.
1328 * mpw-make.in (install-only): New target.
1329 (install): Also depend on install-only.
1331 * mpw-make.in (cplusfilt): Renamed from c++filt.
1332 (INCLUDES): Add more paths.
1334 * mpw-make.in: New file, MPW makefile fragment for binutils.
1335 (Normally automatically generated from Makefile.in.)
1337 Mon Mar 27 11:52:57 1995 Ian Lance Taylor <ian@cygnus.com>
1339 * ar.c (write_archive): Call make_tempname to get output file
1340 name, rather than using a fixed name based on the input file.
1342 * objcopy.c (make_tempname): Copy from here...
1343 * bucomm.c (make_tempname): ...to here, and make global.
1344 * bucomm.h (make_tempname): Declare.
1346 Fri Mar 24 11:47:42 1995 Ian Lance Taylor <ian@cygnus.com>
1348 * strings.c: Include "bfd.h" before other headers. Include
1350 * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
1351 and print them with %ld.
1353 Fri Mar 10 13:09:42 1995 Ian Lance Taylor <ian@cygnus.com>
1355 * objcopy.c (strip_options): Add --keep-symbol.
1356 (copy_options): Likewise.
1357 (copy_usage): Mention --keep-symbol and -K.
1358 (strip_usage): Likewise.
1359 (keep_symbols): New static variable.
1360 (is_strip_symbol): Adjust the return value according to
1362 (strip_main): Handle -K. For -N, check that -K was not given.
1363 (copy_main): Likewise.
1364 * binutils.texi, objcopy.1, strip.1: Document -K.
1366 Mon Mar 6 13:33:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1368 * objcopy.c (copy_archive): Check result of mkdir.
1369 (copy_main): Cast an xmalloc result.
1371 * objdump.c (usage): Break long format string into shorter ones.
1373 Mon Mar 6 13:46:12 1995 Ian Lance Taylor <ian@cygnus.com>
1375 * bucomm.c (list_supported_targets): New function.
1376 * bucomm.h (list_supported_targets): Declare.
1377 * ar.c (usage): Call list_supported_targets.
1378 * nm.c (usage): Likewise.
1379 * objcopy.c (copy_usage, strip_usage): Likewise.
1380 * objdump.c (usage): Likewise.
1381 * size.c (usage): Likewise.
1382 * strings.c (usage): Likewise.
1384 Tue Feb 28 15:13:58 1995 Ian Lance Taylor <ian@cygnus.com>
1386 * bucomm.c (print_arelt_descr): Cast st_size to long before
1387 passing it to fprintf.
1389 Fri Feb 17 13:36:45 1995 Ian Lance Taylor <ian@cygnus.com>
1391 * objcopy.c (struct section_list): Add fields remove, set_flags,
1392 and flags. Change adjust from boolean to enum.
1393 (remove_sections): Remove static variable.
1394 (sections_removed): New static variable.
1395 (copy_options): Add --set-section-flags.
1396 (copy_usage): Mention --set-section-flags.
1397 (parse_flags): New static function.
1398 (find_section_list): New static function.
1399 (is_strip_symbol): Change return type from int to boolean.
1400 (is_strip_section): New static function.
1401 (filter_symbols): Call is_strip_section.
1402 (copy_object): When adding sections, check for specified flags or
1403 VMA. Call filter_symbols if any sections are being removed.
1404 (setup_section): Use find_section_list function rather than
1405 looking through remove_sections and adjust_sections. Handle
1406 --set-section-flags.
1407 (copy_section): Use find_section_list rather than looking through
1409 (strip_main): Use find_section_list instead of adding items to
1411 (copy_main): Use find_section_list instead of adding items to
1412 sections_removed and adjust_sections. Handle --set-section-flags.
1413 * binutils.texi, objcopy.1: Document --set-section-flags.
1415 Tue Feb 14 18:03:03 1995 Ian Lance Taylor <ian@cygnus.com>
1417 * objdump.c (with_source_code): New global variable.
1418 (usage): Mention -S/--source.
1419 (long_options): Add --source.
1420 (prev_functionname, prev_line): New static variables.
1421 (struct print_file_list): Define.
1422 (print_files): New static variable.
1423 (skip_to_line, show_line): New static functions.
1424 (disassemble_data): Call show_line to handle -l and -S.
1426 * binutils.texi, objdump.1: Document -S/--source.
1428 Thu Feb 9 16:11:53 1995 Ian Lance Taylor <ian@cygnus.com>
1430 * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
1431 (strip_usage): Likewise.
1433 * objcopy.c (struct section_add): Define.
1434 (add_sections): New static variable.
1435 (copy_options): Accept --add-section.
1436 (copy_usage): Mention --add-section.
1437 (copy_object): Add sections from the add_sections list.
1438 (copy_main): Handle --add-section.
1439 * binutils.texi, objcopy.1: Document --add-section.
1441 Wed Feb 1 15:04:57 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1443 * objdump.c (disassemble_data): Pass section offset, not absolute
1444 address, to bfd_find_nearest_line.
1446 * nlmconv.c (powerpc_mangle_relocs): Don't use const with
1449 Thu Jan 26 18:50:06 1995 Ian Lance Taylor <ian@cygnus.com>
1451 * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
1453 (objdump_print_address): Likewise.
1454 (disassemble_data): Don't change the symbol values. It can
1455 confuse bfd_canonicalize_reloc.
1457 Thu Jan 26 12:03:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1459 * configure.in: Add support for powerpc-*-ebai.
1461 Wed Jan 18 10:02:12 1995 Steve Chamberlain <sac@splat>
1463 * coffdump.c: Include sysdep.h.
1464 (dump_coff_type): Handle coff_secdef_type.
1465 * coffgrok.c : Include sysdep.h.
1466 * srconv.c: Include libiberty.h
1467 (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
1469 Wed Jan 18 12:24:14 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1471 * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
1473 * coffgrok.c: Include bucomm.h. Don't declare xmalloc.
1474 (push_scope): Declare type of parameter link.
1475 * size.c: Include libiberty.h.
1476 * srconv.c: Include bucomm.h.
1477 (find_base): Declare at top of file.
1478 (wr_hd): Add default case to architecture switch.
1479 (wr_dps_start): Declare type of parameter nest.
1480 (wr_du): Comment out variables used only in commented out blocks.
1481 (wr_dus): Remove unused variable i.
1482 (wr_sc): Remove unused variables myinfo, low, and high.
1483 * strings.c: Include libiberty.h.
1484 * sysdump.c: Include <ctype.h>.
1486 Tue Dec 20 19:13:44 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1488 * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
1490 Thu Dec 15 17:34:12 1994 Stan Shebs <shebs@andros.cygnus.com>
1492 * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
1493 * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
1495 * ar.c (map_over_members, open_inarch): Call PROGRESS.
1496 * nm.c (main, display_archive, filter_symbols, print_symbols):
1499 * objcopy.c (copy_usage): Break up long usage string.
1501 Wed Dec 14 15:51:56 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1503 * objcopy.c (copy_object): Don't bother setting status after
1504 nonfatal() "call", because it won't return.
1506 Fri Dec 9 00:22:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1508 * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
1509 the section symbol if the symbol is undefined.
1511 Thu Dec 8 14:45:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1513 * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
1515 Wed Nov 30 11:05:43 1994 Ian Lance Taylor <ian@rtl.cygnus.com>
1517 * ar.c (replace_members): Pass current->filename to normalize when
1518 checking for duplicates, because the filename of a newly added
1519 file will not have been normalized yet.
1521 Thu Nov 17 15:00:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1523 * ar.c (main): Don't call do_quick_append if any of the archive
1524 names are longer than 14 characters.
1526 * objcopy.c (main): Fix is_strip test. From
1527 pirker@eiunix.tuwien.ac.at (Martin Pirker).
1529 Thu Nov 17 15:37:19 1994 Mark W. Eichin <eichin@cygnus.com>
1531 * objcopy.c (add_strip_symbol): New function, adds a name to an
1532 explicit list of symbols to strip.
1533 (is_strip_symbol): New function, reports whether the name argument
1534 is in the explicit list.
1535 (filter_symbols): Check against is_strip_symbol above all.
1536 (strip_main): Recognize -N option. If used, don't default to
1538 (copy_main): Recognize -N option.
1539 (strip_usage): Document -N and --strip-symbol options.
1540 (copy_usage): Ditto.
1541 * objcopy.1, strip.1, binutils.texi: Document -N and
1542 --strip-symbol options.
1544 Tue Nov 8 13:12:54 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1546 * objdump.c (display_target_list, display_info_table): Pass an
1547 array to tmparg, rather than NULL, since some systems can't handle
1550 * objcopy.c (copy_archive): Keep a list of the names of the
1551 temporary files we created. Close each input BFD after we open
1554 Mon Nov 7 15:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1556 * Makefile.in (VERSION): Bump to 2.5.3.
1558 Thu Nov 3 19:04:34 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1560 * Makefile.in (install-info): Install info files from whatever
1561 directory they were found in.
1563 Patch from DJ Delorie:
1564 * configure.bat: do c++filt -> cxxfilt right
1566 * sysinfo.y: Include system header files early, so any potential
1567 declaration of abort() occurs before its use.
1569 * strings.c (strings_file): Try opening the file in binary mode
1572 Wed Nov 2 15:44:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1574 * ar.c (main): Treat ar qs like ar rs.
1576 Tue Oct 25 16:19:25 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1578 * objcopy.c (gap_fill): Explicitly initialize, for clarity.
1579 (pad_to_set, pad_to): New static variables.
1580 (copy_options): Accept --pad-to.
1581 (copy_usage): Mention --pad-to.
1582 (copy_object): Support --pad-to.
1583 (compare_section_vma): Sort non loadable sections to the front.
1584 Sort sections with the same VMA by size.
1585 (copy_main): Handle --pad-to.
1586 * binutils.texi, objcopy.1: Document --pad-to.
1588 Thu Oct 20 13:51:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1590 * objcopy.c (gap_fill_set, gap_fill): New static variables.
1591 (copy_options): Accept --gap-fill.
1592 (copy_usage): Mention --gap-fill.
1593 (copy_object): Support --gap-fill.
1594 (get_sections, compare_section_vma): New static functions.
1595 (copy_main): Handle --gap-fill.
1596 * binutils.texi, objcopy.1: Document --gap-fill.
1598 Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1600 * Makefile.in (check): Add a dummy else clause to the if
1603 * objcopy.c (copy_object): Revert yesterday's change.
1604 * binutils.texi, objcopy.1: Remove special mention of --set-start
1605 and `binary' output format.
1607 Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1609 * objcopy.c (copy_object): If the output file format is `binary',
1610 and the start address was not set using --set-start, default the
1611 start address to zero. This hack is because the `binary' output
1612 file format uses the start address to set the virtual address of
1613 the first byte in the file.
1614 * binutils.texi, objcopy.1: Add some notes on generating S-records
1617 * nm.c (print_symdef_entry): Call print_symname to print the
1618 symbol name, so that --demangle works.
1620 * Makefile.in (mostlyclean): Remove tmpdir.
1622 * objcopy.c (struct section_list): Add fields used, adjust, val.
1623 (adjust_start, set_start_set, set_start): New static variables.
1624 (adjust_section_vma, adjust_sections): New static variables.
1625 (copy_options): Add --adjust-start, --adjust-vma,
1626 --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
1628 (parse_vma): New static function.
1629 (copy_usage): Mention new options.
1630 (copy_object): Handle --set-start and --adjust-start.
1631 (setup_section): Correct type of last argument to PTR. Set used
1632 field if section is removed. Handle --adjust-vma and
1633 --adjust-section-vma.
1634 (copy_section): Correct type of last argument to PTR.
1635 (mark_symbols_used_in_relocations): Likewise.
1636 (strip_main): Clear used field when handling -R.
1637 (copy_main): Handle new options.
1638 * binutils.texi (objcopy): Document new options.
1639 * objcopy.1: Document new options.
1641 Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1643 * configure.in (configdirs): Remove definition--testsuite is no
1645 * Makefile.in (testsuite): Remove target.
1646 (site.exp): New target.
1648 (clean, distclean): Don't recur into testsuite directory.
1650 Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1652 * Makefile.in (VERSION): Updated to 2.5.
1653 * Version 2.5 released.
1655 Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1657 * Makefile.in (sysdump.o): Depends upon sysroff.c.
1659 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
1661 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
1662 ctor/dtor tables needed by C++ programs are built.
1664 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
1666 * Makefile.in (srconv.o): Add dependence on sysroff.c.
1668 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1670 * configure.in: Use ${config_shell} when running config.bfd.
1672 * Makefile.in (sysroff.h): Split target away from sysroff.c.
1673 (srconv.o, sysdump.o): New targets.
1674 (srconv, sysdump): Don't depend upon sysroff.c.
1676 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1678 * Makefile.in (arparse.c): Don't ignore errors from mv.
1679 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
1680 parallel make from trying to build both arparse.c and sysinfo.c
1682 (nlmheader.c): Similar change.
1683 (arparse.h): Separate target from arparse.c, so that a parallel
1684 make does not try to build both at once. Depend upon arparse.c.
1685 (sysinfo.h): Similar change.
1687 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
1688 the pointer used to loop over the relocs.
1690 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
1692 * objdump.c (disassemble_data): Cast result of xmalloc.
1694 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1696 * objdump.c (sorted_syms, sorted_symcount): New global variables.
1697 (objdump_print_address): Use sorted_syms and sorted_symcount
1698 instead of syms and symcount.
1699 (disassemble_data): Don't bother to get the relocs before looping
1700 over the sections. Before filtering and sorting the symbol table,
1701 copy it into sorted_syms.
1703 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1705 * objdump.c (struct objdump_disasm_info): Add field require_sec.
1706 (objdump_print_address): If aux->require_sec, require that the
1707 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
1708 find a smaller symbol in the right section, look for a larger one.
1709 (disassemble_data): Set aux.require_sec around the
1710 objdump_print_address call for the instruction address.
1712 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1714 * ar.c: Call xexit rather than exit.
1715 (output_filename, output_file, output_bfd): New static variables.
1716 (remove_output): New static function.
1717 (main): Call xatexit (remove_output). Call xexit rather than
1719 (extract_file): Set output_filename and output_file while output
1721 (write_archive): Likewise, but use output_bfd, not output_file.
1722 * arsup.c: Include libiberty.h. Call xexit rather than exit.
1723 * bucomm.c: Likewise.
1725 * objdump.c (disassemble_all): New global variable.
1726 (usage): Document --disassemble-all.
1727 (long_options): Add disassemble-all as a synonym for -D.
1728 (compare_symbols): Make pointers const.
1729 (compare_relocs): New static function.
1730 (disassemble_data): Rename disassemble to disassemble_fn to avoid
1731 shadowing. If dump_reloc_info, print relocs along with
1732 disassembly. Skip sections which are not SEC_CODE unless
1733 disassemble_all or only is set.
1734 (display_bfd): Don't call dump_relocs if disassemble is set.
1735 (main): Accept and handle -D.
1736 * binutils.texi: Document -D/--disassemble-all.
1737 * objdump.1: Likewise.
1739 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1741 * objdump.c (disassemble_data): Initialize prevline to 0. Make
1742 prev_function non const. Copy functionname into an malloc buffer
1743 when setting prev_function, instead of assuming that the string
1746 * nm.c: Include libiberty.h.
1747 (sort_by_size): New static variable.
1748 (long_options): Add --size-sort.
1749 (usage): Mention --size-sort.
1750 (numeric_forward): Make static. Change from void * to PTR.
1751 (numeric_reverse): Likewise.
1752 (non_numeric_forward, non_numeric_reverse): Likewise.
1753 (sorters): Change declaration from void * to PTR.
1754 (size_forward, sort_symbol_by_size): New static functions.
1755 (display_rel_file): Handle sort_by_size.
1756 (filter_symbols): If sort_by_size, discard absolute and undefined
1758 * binutils.texi (nm): Document --size-sort.
1759 * nm.1: Document --size-sort.
1761 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
1763 * objcopy.c (copy_main): Initialize input_filename and
1764 output_filename to NULL.
1766 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1768 * Makefile.in (version.o): Depend upon Makefile, so that version.o
1769 gets rebuilt when make variable VERSION is changed.
1771 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
1773 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1775 * configure.in: Change i[34]86 to i[345]86.
1777 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1779 * ar.c (ranlib_touch): Don't update the archive map if there isn't
1782 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1784 * ar.c: Include libiberty.h.
1785 (inarch): Remove variable.
1786 (map_over_members): Make static. Add arch argument, and use it
1787 instead of inarch. Change all callers.
1788 (main): Treat --version as -v. Accept -t argument. Accept any
1789 number of archive arguments. Catch and use open_inarch return
1790 value, rather than using inarch.
1791 (open_inarch): Return newly opened BFD, rather than using inarch.
1792 (do_quick_append): Make archive_filename const.
1793 (write_archive): Add iarch argument, and use it instead of inarch.
1795 (delete_members, move_members, replace_members): Likewise.
1796 (ranlib_only): Don't exit on success. Catch and use open_inarch
1798 (ranlib_touch): New function.
1799 * arsup.h (map_over_members): Don't declare.
1800 (ar_end, ar_extract): Declare.
1801 (open_inarch): Change return value in declaration to bfd *.
1802 * arsup.c (map_over_list): Make static. Always pass two arguments
1803 to function. Add arch argument, and use it instead of inarch.
1805 (ar_directory_doer): Make static. Add ignored second argument.
1807 (ar_directory): Use open_inarch return value rather than inarch.
1808 (ar_addlib_doer): Make static.
1809 (ar_addlib): Use open_inarch return value rather than inarch.
1810 (ar_extract): Remove unused local variable abfd.
1812 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1814 Add support for removing named sections to objcopy and strip.
1815 * objcopy.c (struct section_list): Define.
1816 (remove_sections): New static variable.
1817 (strip_options, copy_options): Add remove-section.
1818 (copy_usage, strip_usage): Mention -R and --remove-section.
1819 (setup_section): If section is in remove_sections list, ignore it.
1820 (copy_section): Likewise.
1821 (strip_main, copy_main): Handle -R.
1822 * binutils.texi, objcopy.1, strip.1: Document new options.
1824 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
1826 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
1827 so as not to conflict with the symvalue typedef in bfd.h.
1829 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1831 * nlmheader.y: Per current NetWare docs, accept a revision number
1832 of 0 and treat a revision number greater than 26 as 0.
1834 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1836 * objdump.c (objdump_print_address): Correct handling of end of
1837 symbols when looking for next symbol with a different value.
1839 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1841 * nm.c (numeric_forward): Treat undefined symbols as "less than"
1842 defined symbols with zero values. If numeric values are equal, or
1843 both symbols are undefined, sort alphabetically. Don't assume
1844 that the difference of two bfd_vma values will truncate to "int"
1845 and still have the same sign.
1846 (numeric_reverse): Call numeric_forward and negate the result.
1847 (print_symbol_info_bsd): For undefined symbols, print leading
1848 spaces equivalent to the width of a printed bfd_vma, rather than
1849 assuming that 8 will look right.
1851 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1853 * coffgrok.c (doit): Zero all fields of new structure.
1854 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
1855 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
1858 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
1860 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
1861 rather than the parser.
1863 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1865 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
1868 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1870 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
1871 even if the bfd is not marked DYNAMIC. ELF executables are not
1872 marked DYNAMIC, but do have dynamic symbols.
1874 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1876 * coffgrok.c (do_where): Make data with no type 'int'.
1877 (do_define): Keep info on source file of a symbol.
1878 * coffgrok.h (coff_symbol): New field.
1879 * srconv.c (PROGRAM_VERSION): Now 1.3
1880 (wr_rl): Use external ref number for symbol.
1881 (wr_dus): Only keep one source file per debug unit.
1882 (wr_dln): Always emit line numbers for first source file,
1883 (wr_globals): Emit globals in the du of their owning source file.
1885 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
1887 * nlmheader.y: Null terminate var_hdr->threadName.
1889 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1891 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
1892 in $(srcdir), as they will be for FSF releases.
1894 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1896 * nlmconv.c (setup_sections): Preserve existing section flags when
1897 copying in flags from a new section.
1899 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1901 * objcopy.c: Include libiberty.h.
1902 (copy_file): If output_target is NULL, set it to the target of the
1905 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
1907 * nlmconv.c (link_inputs): Fixed memory allocation bug.
1909 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1911 * configure.in: Change --with-targets to --enable-targets.
1913 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1915 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
1917 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
1918 NetWare custom header; no longer needed.
1919 (powerpc_mangle_relocs): Convert relocs against the uninitialized
1920 data section into relocs against the data section.
1922 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
1923 netware targets. Write it into Makefile as NLMCONV_DEFS.
1924 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
1925 * nlmconv.c: Only compile code for specific CPU types if
1926 NLMCONV_cputype is defined.
1928 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
1929 bfd_abs_section_ptr or bfd_is_abs_section, etc.
1930 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
1931 (powerpc_build_stubs): Likewise.
1932 * nm.c (filter_symbols, print_symbols): Likewise.
1933 * objcopy.c (filter_symbols): Likewise.
1934 (mark_symbols_used_in_relocations): Likewise.
1935 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
1936 * size.c (sysv_internal_printer): Likewise.
1938 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1940 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
1941 (install): Install it explicitly, from build dir, not srcdir.
1943 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1945 * objdump.c: Don't include elf/internal.h.
1946 (bfd_elf_find_section): Don't declare.
1947 (read_section_stabs): No special handling for ELF. Always read
1950 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1952 * configure.in: Set UNDERSCORE in Makefile based on result of
1953 invoking config.bfd with a second argument of ``_''.
1954 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
1955 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
1957 (demangle.o): Remove target.
1958 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
1959 demangle.o. It's in libiberty anyhow.
1960 (cplus-dem.o): Don't depend upon demangle.o.
1961 * binutils.texi: Mention -n and --no-strip-underscores arguments
1964 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1966 * nm.c (long_options): Add --no-demangle to turn off --demangle,
1967 and --no-cplus for Linux compatibility.
1968 (usage): Mention --no-demangle.
1969 * binutils.texi: Document --no-demangle.
1971 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1973 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
1975 * objcopy.c (copy_archive): Make the temporary directory in the
1976 same directory as the output BFD, since we may not have write
1977 permission on the current directory. Set the permissions of the
1978 new directory to 0700, not 0777.
1980 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
1982 * configure.in: if this is an rs6000 (and we're not building for
1983 any other bfd targets) then build only nm (collect needs it on
1986 * Makefile.in: define TOOL_PROGS which the list of programes to
1987 install in $tooldir -- replaces a hard-coded list.
1989 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1991 * objdump.c (display_target_list): Remove unused local ok.
1993 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1995 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
1996 they're not compatible under native cc. Use -O1 instead.
1998 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
2000 Changes from binutils-2.4 net release:
2002 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
2003 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
2004 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
2005 magic token to be replaced by sed.
2007 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2009 * configure.bat: update for latest makefile.in
2011 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2013 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
2015 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
2017 * objcopy.c (copy_section): Set section size correctly if using
2020 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
2022 * Makefile.in: Add rule for sysinfo.h
2024 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
2026 * Makefile.in (SRCONV_PROG): Define.
2027 (PROGS): Use $(SRCONV_PROG) too.
2029 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2031 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
2032 someone configures with `targets=all'.
2033 (distclean): Remove y.*.
2034 (syslex.o): Depend on sysinfo.h.
2035 (sysinfo.c): Rename y.tab.h to sysinfo.h.
2036 (install-info): Don't try to install into $(infodir)/$(srcdir).
2037 * syslex.l: Include sysinfo.h, not y.tab.h.
2039 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2041 * syslex.l (yywrap): Define as function if not defined as a macro.
2043 * Makefile.in (objdump.o): Deleted special rule.
2044 * configure.in: Don't bother building ARCHDEFS variable for
2046 * objdump.c (ARCH_*): Deleted handling.
2047 (disassemble_data): Call `disassembler' from opcodes library.
2049 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2051 * Makefile.in (install): Correct handling of $(tooldir) and
2052 $(bindir) being on different devices.
2054 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
2056 * sysdump.c (h8300, sh): Add declarations.
2058 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
2060 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
2061 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
2062 sysroff.info: Major changes.
2064 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
2066 * objdump.c (print_section_stabs): Indicate the stab header symbol
2067 more clearly, print numbers of unrecognized stab n_type values.
2069 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2071 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
2073 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2075 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
2077 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2079 * nlmconv.c (setup_sections): Remove special handling of .reginfo
2081 (copy_sections): Likewise.
2082 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
2083 special ECOFF .reginfo section.
2085 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
2086 copying everything else, to let it fiddle with the file in its
2089 * objdump.c: Include libiberty.h.
2090 (display_target_list): If a format fails, just go on to the next
2091 one. Check return value of bfd_set_format.
2092 (display_info_table): Likewise. Don't increment loop variable in
2093 for loop test, since that skips the first element.
2094 (display_target_tables): Rewrite loop for clarity. Ensure that it
2095 always prints at least one element.
2097 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
2098 sections header. Rename from cygnus_sections to cygnus_ext.
2100 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2102 * objdump.c (_DUMMY_NAME_): Don't define.
2103 (display_target_list): Use tmpnam to get a file name rather than
2104 using _DUMMY_NAME_. Unlink it when done.
2105 (display_info_table): Likewise.
2107 * nlmconv.c (secsec): New static variable.
2108 (main): Create .nlmsections section in output BFD. Store
2109 information about it in sections header.
2110 (setup_sections): Allocate space in sections header.
2111 (copy_sections): Copy zero sized sections. Put information about
2112 each section in the sections header.
2114 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2116 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
2117 Change caller. Create custom header for new PowerPC NetWare
2120 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
2121 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
2122 * nlmheader.y: Include bfd.h with "", not <>.
2124 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2126 * objdump.c: Do an ifdef on __GO32__, not unix.
2128 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2130 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
2131 (--dynamic-reloc) arguments to objdump.
2132 * nm.c (dynamic): New static variable.
2133 (long_options): Added "dynamic".
2134 (usage): Mention -D and --dynamic.
2135 (main): Add D to getopt string. Handle -D by setting dynamic.
2136 (display_rel_file): If dynamic is non-zero, read dynamic symbols
2137 rather than normal symbols.
2138 * nm.1: Updated for -D (--dynamic) option.
2139 * objdump.c (dump_dynamic_symtab): New global variable.
2140 (dump_dynamic_reloc_info): New global variable.
2141 (dynsyms, dynsymcount): New global variables.
2142 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
2143 (long_options): Added "dynamic-reloc" and "dynamic-syms".
2144 (slurp_symtab): If no symbols, return rather than exit.
2145 (slurp_dynamic_symtab): New function.
2146 (display_bfd): Handle dump_dynamic_symtab and
2147 dump_dynamic_reloc_info.
2148 (dump_symbols): Take new dynamic argument, indicating whether to
2149 display dynamic symbols.
2150 (dump_relocs): Move most printing into dump_reloc_set.
2151 (dump_dynamic_relocs): New function.
2152 (dump_reloc_set): New function, extracted from dump_relocs.
2153 (main): Add R and T to getopt string. Handle -T by setting
2154 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
2155 * objdump.1: Updated for -R (--dynamic-reloc) and -T
2156 (--dynamic-syms) options.
2157 * binutils.texi: Updated for new nm and objdump options.
2159 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2161 Update for recent BFD changes to symbol and reloc reading. Rename
2162 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
2164 * coffgrok.c (symcount): Change to long.
2165 (do_sections_p1): Check for error return from
2166 bfd_get_reloc_upper_bound. Change relcount to long, and check for
2167 error from bfd_canonicalize_reloc.
2168 (coff_grok): Change storage to long. Check for error from
2169 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2170 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
2171 i to long. Check for error from bfd_get_symtab_upper_bound and
2172 bfd_canonicalize_symtab.
2173 (copy_sections): Change reloc_size and reloc_count to long. Check
2174 for error from bfd_get_reloc_upper_bound and
2175 bfd_canonicalize_reloc.
2176 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
2177 reloc_count_ptr argument to long *. Make corresponding changes to
2178 variables loaded from *reloc_count_ptr.
2179 * nm.c (display_rel_file): Change storage and symcount to long.
2180 Check for errors from bfd_get_symtab_upper_bound and
2181 bfd_canonicalize_symtab.
2182 * objcopy.c (filter_symbols): Change symcount, src_count and
2184 (copy_object): Change symcount to long. Pass another argument to
2185 fprintf. Check for errors from bfd_get_symtab_upper_bound and
2186 bfd_canonicalize_symtab.
2187 (copy_section): Change relcount to long. Check for errors from
2188 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
2189 (mark_symbols_used_in_relocations): Change relcount and i to long.
2190 Check for errors form bfd_get_reloc_upper_bound and
2191 bfd_canonicalize_reloc.
2192 * objdump.c (storage): Remove global variable.
2193 (symcount): Changed to long.
2194 (slurp_symtab): New local variable storage. Check for errors from
2195 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2196 (remove_useless_symbols): Change return value and count to long.
2197 (objdump_print_address): Change min, max, thisplace and i to long.
2198 (disassemble_data): Change i to long.
2199 (dump_symbols): Change count to long.
2200 (dump_relocs): Change relcount to long. Check for errors from
2201 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
2202 (display_info_table): Add casts when passing LONGEST_ARCH for
2205 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2207 * nm.c (display_archive): Close each archive element after it has
2209 * objdump.c (display_file): Likewise.
2211 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2213 * configure.in: Change error message to refer to bfd/config.bfd
2214 rather than bfd/configure.in.
2216 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2218 * More fixes for object formats which allow multiple sections
2220 * objcopy.c (setup_section): Make a new output section even if
2221 one already exists with the given name.
2222 (copy_section): Use isection->output_section rather than trying
2223 to look the output section up by its (possibly non-unique) name.
2225 * Makefile.in (install-info): Look for binutils.info in the
2226 current directory, then in $(srcdir). Don't use $<.
2228 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2230 * objdump.c (objdump_print_address): Make static. Declare with
2231 prototype. Change vardiff from int to bfd_signed_vma. Correct
2232 binary search termination condition. When looking for same
2233 section symbol in relocatable file, handle final symbol correctly.
2235 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2237 * Makefile.in: Avoid bug in hpux sed.
2239 * objcopy.c: Changes to keep it from stripping symbols used
2240 in output relocations.
2241 (mark_symbols_used_in_relocations): New function. Mark symbols
2242 used in output relocations with BSF_KEEP.
2243 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
2244 (copy_object): Reorder actions. First setup sections, then
2245 build the output symbol table, then copy the section contents.
2247 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2249 * ar.c (write_archive): Allocate space for the null byte. From
2250 Robert Lipe <robertl@arnet.com>.
2252 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2254 * Makefile.in: Built nm.new and strip.new to avoid problems with
2255 collect when . is in PATH.
2256 (STRIP_PROG): Change from strip to strip.new.
2257 (NM_PROG): Change from nm to nm.new.
2258 (install): Remove the .new when installing.
2260 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2262 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
2263 symbol for which we build a stub.
2264 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
2265 symbol with BSF_DYNAMIC flag set.
2267 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2269 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
2270 if a symbol represents a compiler-generated local label.
2271 (copy_object): Give the BFD backends a chance to copy any private
2272 bfd data from the input BFD to the output BFD.
2273 (setup_section): Give the BFD backends a chance to copy any private
2274 section data from the input section to the output section.
2276 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2278 * objcopy.c (mangle_section): Delete unused function.
2279 (setup_section): Set osection here instead of calling
2280 mangle section to do it.
2282 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2284 * ar.c (write_archive): Close inarch before unlinking it.
2286 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2288 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
2289 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
2290 the start and end symbols are not in the text section.
2291 (struct powerpc_stub): New struct definition.
2292 (powerpc_stubs, powerpc_stub_insns): New static variables.
2293 (powerpc_initial_got_size): New static variable.
2294 (powerpc_build_stubs): New function.
2295 (powerpc_resolve_stubs): New function.
2296 (powerpc_mangle_relocs): Clear extraneous data in .got section.
2297 Rearrange reloc handling to handle ELF relocs that are not
2298 partial_inplace. Resolve PC relative relocs.
2300 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2302 * ar.c (move_members): Fix it so that the abi positional modifiers
2303 don't delete all archive members following the insert point.
2305 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2307 * coffgrok.[ch]: New files, understand coff objects.
2308 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
2310 * sysroff.info: Description of a SYSROFF object file.
2311 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
2312 header files and a printer.
2313 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
2314 file to a SYSROFF file.
2316 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
2318 * ar.c (do_quick_append): Pad with a genuine character 10,
2319 rather than whatever '\n' might happen to be.
2321 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
2323 * nlmconv.c (main): Ignore debugging symbols when looking for
2324 special symbols by name.
2326 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
2328 * nlmconv.c: Include libiberty.h.
2330 Support for PowerPC NetWare.
2331 * nlmconv.c (main): For PowerPC NetWare, automatically define the
2332 special symbols __toc_start.
2333 (select_output_format): Handle bfd_arch_powerpc.
2334 (mangle_relocs): Likewise.
2335 (powerpc_mangle_relocs): New function.
2337 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2339 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
2340 size.c: Use bfd_get_error and bfd_set_error and new error names.
2342 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2344 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
2346 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2348 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
2350 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2352 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
2353 Call xmalloc_set_program_name.
2355 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2357 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
2358 can do arithmetic on it.
2360 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2362 * objdump.c (dump_section_stabs, read_section_stabs,
2363 print_section_stabs): Functions broken out of dump_stabs_1.
2364 Free the stabs and strings when done with them.
2366 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2368 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
2369 * ar.c (print_contents, extract_file), size.c
2370 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
2371 bfd_my_archive instead of dereferencing the structs directly.
2373 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
2374 Indent. Remove DEFUNs.
2376 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
2378 * nm.c (display_file, display_archive), size.c (display_bfd):
2380 Print matching formats if there is an ambiguous match. Use
2381 bfd_nonfatal instead of hardcoded error message if nothing matches.
2383 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
2386 * nm.c (display_archive): New function, from code in display_file.
2387 (display_rel_file): Renamed from do_one_rel_file.
2390 (display_archive): New function from code in display_file.
2391 (display_file): Check bfd_close error return.
2393 * strings.c (strings_object_file): Check bfd_check_format
2396 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
2398 * bucomm.c: Delete references to exit_handler. It wasn't set
2399 anywhere, and now that we're using the libiberty xmalloc, it
2400 wouldn't always get called before exiting.
2401 (list_matching_formats): Function moved from objdump.c.
2402 * bucomm.h: Declare it.
2404 * objdump.c (disassemble_data): Move some variable decls closer to
2405 their use. Add some comments. Replace a nested block with a
2408 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
2410 * objdump.c (display_target_list, display_info_table): Check that
2411 the bfd of the dummy output file is not null.
2413 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2415 * objcopy.c (filter_bytes): New function.
2416 (copy_section): Call it.
2417 (copy_options, copy_usage, copy_main): Add --byte option to
2418 activate it. Appropriate the -b option (which was an undocumented
2419 synonym for -F) for it, also. Add --interleave, -i option for
2421 (setup_section, copy_section, mangle_section): Renamed with no `s'
2423 * objcopy.1, binutils.texi: Document the new options.
2425 * objdump.c (display_target_tables, display_target_list):
2426 New functions broken out of display_info.
2427 Eliminate some magic constants. Use more meaningful variable names.
2428 (dump_bfd_header): New function broken out of display_bfd.
2429 (dump_section_header): New function broken out of dump_headers.
2430 (remove_useless_symbols): Don't shadow global variable name with
2432 (objdump_print_address): Fix backward test.
2434 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
2436 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
2437 * objdump.h: Removed.
2439 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2441 * objdump.c (display_file): Remove call to list_matching_formats.
2442 It would never be called.
2443 (list_matching_formats): Take an arg giving the list of matching
2445 (display_bfd): Pass the arg, and get it filled in by calling
2446 bfd_check_format_matches instead of bfd_check_format.
2447 (display_info, display_info_table): target_vector was renamed to
2450 * binutils.texi (objdump): Note some limitations of -h section
2453 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
2455 * Makefile.in (MALLOC): Set to emptiness by default.
2456 (ALL_CFLAGS): Add and use.
2457 (arparse.h): Make it depend on arparse.y.
2458 * ar.c (libbfd.h): Don't require to be in ../bfd.
2459 * objdump.c (comp): Rename to compare_symbols.
2461 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2463 * objdump.c (list_matching_formats): If the file format is ambiguous,
2464 print the matching names so the user can choose one.
2465 (display_bfd): Call it.
2466 (display_file): Call it.
2468 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2470 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
2472 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
2474 * objdump.c (stab_name): Allocate dynamically.
2475 (stab_print): Use pointers to strings instead of char arrays.
2476 (dump_stabs): Change alloc and init of arrays appropriately.
2477 (dump_stabs_1): Always decide whether to print stab_name or
2478 the stab's type number, if unnamed.
2480 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2482 * objcopy.c (strip_main, copy_main): Don't clobber the input file
2485 * nlmconv.c (main): Warn about an attempt to use a shared library
2486 with uninitialized data.
2488 * nlmconv.c (setup_sections): Make sure that we align the
2489 output_offset of each input section appropriately.
2491 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2493 * objdump.c (dump_relocs): Don't crash if section name is NULL.
2495 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2497 * filemode.c (filemodestring): Commented out; not used.
2498 (mode_string): Use POSIX definitions.
2499 (ftypelet): Likewise.
2500 (rwx): Removed; no longer used.
2501 * bucomm.c: Include bucomm.h.
2502 (bfd_nonfatal, bfd_fatal): Argument is const.
2503 (fatal): Make __STDC__ version.
2504 * bucomm.h (mode_string): Declare.
2505 * Makefile.in (bucomm.o): Depend upon bucomm.h
2507 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
2509 * bucomm.c (xmalloc, xrealloc): Deleted.
2510 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
2511 libiberty version of functions.
2513 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2515 * binutils.texi: Add a chapter summarizing the ways to select
2516 aspects of the target for each program.
2518 * objdump.c (long_options, usage): Add long equivalents for all
2519 remaining short options that lacked them.
2520 * binutils.texi objdump.1: Document them.
2522 * size.c (usage): Tweak usage message.
2523 * size.1: Add missing `=' in examples.
2525 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
2526 Use "--target=bfdname" as the option to select the BFD target,
2527 like nm and size already do.
2528 Reserve "--format=format" for textual output selection options, but
2529 for now keep old option names as obsolete for backward compatibility.
2531 * strings.c (main, strings_object_file, usage): Add --target option.
2532 * binutils.texi strings.1: Document it.
2534 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2536 * ar.c (main): Add \n in error message.
2538 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2541 * ar.c (main): Put parens around assignment used as truth value.
2542 * objcopy.c (strip_main): Remove unused variables. Return 0.
2543 (copy_main): Remove unused variables. Return 0.
2544 * objdump.c (display_bfd): Declare return value as void.
2545 (stab_print): Use "" instead of 0 to initialize array.
2546 (dump_stabs_1): Print vma using printf_vma.
2547 (display_info): Put parens around assignment used as truth value.
2548 * strings.c (print_strings): Cast printf arguments.
2550 * objcopy.c (copy_main): Use copy_options, not strip_options.
2552 * nlmheader.y (command): Warn about illegal date values.
2554 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
2556 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
2557 (bfd_nonfatal): New function.
2558 (bfd_fatal): Call it.
2560 * objcopy.c (smart_rename): Do a copy if the dest file has
2561 multiple hard links. Remove source file on successful copy.
2562 Try to preserve mode and owner on successful rename.
2564 * objcopy.c: Run through indent. Clean up a bit.
2565 Make global variables static.
2566 Make {input,output}_{target,filename}, show_version local
2567 to various functions.
2568 New global variable `status' for exit status.
2569 (strip_main, copy_main): New functions with code from main.
2570 (nonfatal): New macro. Use it globally instead of bfd_perror and
2573 (copy_object): Call mangle_sections with bfd_map_over_sections.
2574 (mangle_sections): Adjust for new calling convention.
2576 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2578 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
2579 * nlmconv.c (main): Change error message for MAP and FULLMAP.
2581 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2583 * nlmconv.c (main): Warn about imported symbols that are not in
2584 the IMPORT list even if the IMPORT keyword is not used.
2586 * nlmconv.c (debug, unlink_on_exit): New static variables.
2587 (long_options): Add "debug" and "linker".
2588 (main): Handle -d and -l arguments. Make command line input and
2589 output files optional. Parse the command file before opening the
2590 BFD's, which requires storing more information in local variables.
2591 If INPUT names multiple files, link them together. Use OUTPUT for
2592 the output file name if not named on command line.
2593 (show_usage): Changed for new options.
2594 (link_inputs): New function to automatically invoke linker to
2595 handle multiple INPUT files.
2596 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
2597 mostly copied from gcc/gcc.c.
2598 * nlmconv.h (input_files, output_file): Declare.
2599 * nlmheader.y (input_files, output_file): Define.
2600 (command): Support INPUT with a string_list argument. Support
2602 (string_list): Renamed from module_list.
2603 * Makefile.in (nlmconv.o): Define LD_NAME based on
2604 program_transform_name.
2606 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2608 * nlmheader.y (nlmheader_identify): New function. Use it to print
2609 the program name just once, instead of with every error message.
2611 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2613 * nlmconv.c (long_options): Changed --header-info to --header-file
2614 to match documentation and usage message.
2616 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2618 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
2621 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2623 * nlmconv.c (main): Change various types from bfd_size_type to
2624 size_t, since they have to be arguments to fread and fwrite.
2625 Change set from char * to unsigned char *.
2626 (select_output_format): Make mach argument unsigned. Handle
2628 (setup_sections): Don't copy the .reginfo section of an ECOFF
2629 file. Call bfd_set_reloc to initialize the relocation fields.
2630 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
2631 Combine all relocs for a section.
2632 (mangle_relocs): Change type of relocs to permit specific
2633 functions to change it. Call alpha_mangle_relocs for alpha,
2634 default_mangle_relocs for other architectures.
2635 (default_mangle_relocs): New function. Adjust the address of all
2636 relocs by the output_offset.
2637 (i386_mangle_relocs): Change type of relocs argument. Cast length
2638 argument to memmove to size_t.
2639 (alpha_mangle_relocs): New function.
2641 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
2643 * nlmconv.c (select_output_format): Use nlm32-sparc for
2646 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2648 * nlmconv.1: added man page
2649 * objcopy.1: fixed format errors
2651 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2653 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
2655 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2657 * strings.1: Fix typo.
2659 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
2661 * Makefile.in (DISTSTUFF): Build "info".
2662 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
2664 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2666 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
2667 by the new BFD SOM assembler.
2669 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2671 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
2672 strings.1 strip.1: Replace \(em in NAME section with \- so
2673 makewhatis can grok it.
2675 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2677 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
2678 section output_offset.
2680 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2682 * binutils.texi: added nlmconv chapter
2684 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
2686 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
2688 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2690 * Makefile.in (distclean): Don't get rid of dvi or info files.
2692 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2694 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
2696 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2698 * binutils.texi: Move objcopy docs into alphabetical order.
2700 * objdump.c: Use xmalloc instead of malloc.
2702 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
2704 * objdump.c (info): Rename to formats_info.
2705 (dump_stabs_1): Better comments and formatting.
2707 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
2709 * ar.c (main): Always create the archive when quick appending,
2710 even if no input files have been given.
2712 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2714 * nlmconv.c (main): Set sharedDebugRecordOffset and
2715 sharedDebugRecordCount fields in extended header.
2717 * nlmconv.c (main): Force moduleName field to upper case.
2719 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2721 * objcopy.c (main): Give a usage message if there are too many
2724 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2726 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
2727 so FSF distributions (with info files in $(srcdir)) install
2729 (DISTSTUFF): Build nlmheader.c too.
2731 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2733 * ar.c (program_name): Don't define here.
2734 * objdump.c: Include "bucomm.h".
2735 (xmalloc): Don't declare here.
2736 (program_name): Don't define here.
2737 (program_version): Fixed type in declaration.
2738 * size.c: Include "bucomm.h".
2739 (program_name): Don't declare here.
2741 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
2743 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
2745 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2747 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
2748 relocs against defined symbols in the same section.
2750 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
2752 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
2754 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2756 * objcopy.c (simple_copy, smart_rename): New functions.
2759 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2761 * Makefile.in (clean, distclean): Recurse into testsuite.
2763 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2765 * objcopy.c (setup_sections, copy_sections): If stripping, don't
2766 copy SEC_DEBUGGING sections.
2767 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
2769 * objdump.c (usage): Mention --stabs.
2771 * objcopy.c (copy_object): Copy all applicable file flags.
2772 (copy_file): Don't copy EXEC_P specially here.
2774 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2776 * nlmconv.c (main): Adjust data section size to correspond to bss
2777 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
2778 a different section. Use time_t for time variable.
2779 (setup_sections): Only put sections with contents in output NLM.
2780 (i386_mangle_relocs): No symbols are common at this point. Add
2781 casts to avoid warnings.
2783 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
2785 * objdump.c: Made the --stabs option work for stabs-in-coff.
2786 (ELF_STAB_DISPLAY): Removed.
2787 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
2788 any object file format.
2789 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
2790 generic BFD routines for non-ELF case, changed format of message
2791 for no-section-found case.
2792 (display_bfd): Always call dump_stabs if requested.
2793 (dump_data): Call bfd_section_size to get section size.
2795 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2797 * Makefile.in (install): Don't put strings in tooldir/bin.
2799 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2801 * nlmconv.c (total_bss_size): Removed.
2802 (main): Set the bss vma to always follow the data section. Move
2803 symbols into new sections, and adjust values by output_offset.
2804 (setup_sections): Don't copy all sections, but instead point all
2805 text sections to .text, all data sections to .data, and all bss
2807 (copy_sections): Adjust accordingly.
2809 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2811 Only build nlmconv if configured for a NetWare target.
2812 * configure.in: If we have some *-*-netware* target, or are using
2813 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
2814 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
2817 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2819 * objdump.c (ARCH_all): Define ARCH_hppa too.
2820 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
2823 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2825 * nlmconv.c (main): Force creation of .bss section. Set up the
2826 sections before looking at the symbols. Move all common symbols
2827 into .bss section. Automatically define _edata and _end. Only
2828 export symbols in the export list, with multiple prefixes if
2829 necessary. Warn if no version. Always create extended header.
2830 Set date automatically if not already set.
2831 (setup_sections): Count size of bss sections.
2832 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
2833 take reloc_count as a changeable pointer; changed callers.
2834 (i386_mangle_relocs): Remove PC relative relocs within a section,
2835 as they require no adjustment.
2836 * nlmheader.y: Fixed memory allocation throughout: token STRING is
2837 now allocated on the heap, and freed if not needed. Null
2838 terminated copyright message. Accept version with only two
2840 (symbol_list_opt): New nonterminal, either symbol_list or empty.
2841 (symbol_list): Use left recursion to avoid overflowing parser
2843 (yylex): Rearranged beginning of line check. Accept quoted
2844 strings using single quotes. End generic argument at comment
2845 character or parentheses.
2846 (string_list_append): Fixed.
2847 (string_list_append1): New function.
2849 * bucomm.h: The first argument to xrealloc is PTR, not char *.
2850 * bucomm.c (xrealloc): Use PTR rather than char *.
2851 * Makefile.in (objdump.o): Depend upon config.status to notice
2852 --with-targets changes.
2853 (nlmconv.o): Depend upon bucomm.h.
2855 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2857 * configure.in: Don't pass cpu to config.bfd.
2859 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2861 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
2862 (demangle.o): New target.
2863 (cplus-dem.o): Depend on it, to force compilation order when doing
2866 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
2867 (struct output_fns print_symbol_info): Ditto.
2868 (long_options, usage, main): Add -C --demangle option.
2869 (print_symname): New function, demangling if requested.
2870 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
2872 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2874 * Makefile.in: Put CFLAGS last in compilation rules and omit from
2875 linking rules. Use ARCHDEFS to compile objdump.c.
2876 Update dependencies.
2877 * configure.in: Construct ARCHDEFS based on the BFD target makefile
2879 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
2880 according to ARCHDEFS.
2882 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
2884 * ar.c: Removed obsolete and non-functional GNU960 code.
2886 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
2888 * size.c (berkeley_sum): New function.
2889 (bsssize, datasize, textsize): New global variables.
2890 (bss_section_name, data_section_name, text_section_name): Removed.
2891 (print_berkeley_format): Map berkeley_sum over all the sections,
2892 rather than only reporting sizes of specifically named sections.
2893 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
2895 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
2897 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
2898 convert object files into NetWare Loadable Modules.
2899 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
2900 (PROGS): Add NLMCONV_PROG.
2901 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
2904 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
2906 * Makefile.in: define MAKEOVERRIDES to an empty string
2908 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2910 * objcopy.c (copy_file): Make failures to process a file nonfatal.
2912 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2914 * nm.c: Add -B option, like --format=bsd.
2916 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2918 * objcopy.c (copy_file): If the file is neither an object nor an
2919 archive, give an error rather than returning success.
2921 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
2923 * objdump.c (objdump_print_address): Prefer non-local symbols over
2924 local ones, and especially discriminate against debugging symbols.
2925 Also, for relocateable files, try to find a symbol in the current
2926 section, instead of picking one from some random section with a
2927 convenient value (read, section offset).
2928 (disassemble_data): Cast argument to malloc to size_t first.
2929 (dump_data): Likewise.
2930 (dump_relocs): If a single section name is specified, show relocs
2931 only for that section. Otherwise, silently omit sections without
2932 relocs. Format table nicely even if values are printed using 16
2933 digits instead of 8.
2935 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2937 * nm.c: Changes for final version of POSIX.2.
2938 (print_symbol_filename_{bsd,sysv,posix}): New functions.
2939 (formats): Add an element for a pointer to them.
2940 (print_symbols): Call it.
2941 (print_object_filename_posix, print_archive_member_posix): Produce
2942 output according to new POSIX.2 spec.
2944 * strings.c (print_strings): Handle STREAM being NULL.
2945 (strings_a_section): Pass a NULL.
2946 (main): Don't open /dev/null.
2948 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * objdump.c (disassemble_data): Handle the m88k.
2951 (display_bfd): Use bfd_errmsg, rather than just claiming that the
2952 bfd is not an object file.
2954 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
2956 * Makefile.in (TAGS): make work again by naming directories
2957 explicitly rather than depending on undefined macros.
2958 (INSTALL_XFORM): correct bad install target.
2960 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2962 * strings.c: Doc fixes.
2964 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2966 * Makefile.in: Note dependencies on bucomm.h.
2967 (cplus-dem.o): Link c++filt with version.o.
2969 * strings.c: Include bucomm.h and add prototypes to other decls.
2972 * bucomm.h: Declare xrealloc.
2974 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
2975 --help option. Put "GNU" in the version message.
2976 (usage): Take stream and exit status as args.
2977 (main): Pass new args to usage.
2979 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2981 * strings.c, strings.1: New files.
2982 * binutils.texi: Document strings.
2983 * Makefile.in: Add rules for it.
2985 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2987 * objdump.c: Use size-independent bfd elf section names.
2989 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2991 * objdump.c (objdump_print_address): Handle wide offsets by
2992 calling sprintf_vma.
2994 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
2996 * objdump.c (syms2): Removed unused variable.
2997 * objdump.c (remove_useless_symbols): New function.
2998 * objdump.c (comp): Simplify.
2999 * objdump.c (dis-assemble_data): Make simpler and more
3000 efficient how we filter out useless symbols: Just filter
3001 BEFORE the sort (using remove_useless_symbols).
3002 * objdump.c (objdump_print_address): Simplify.
3003 Change output syntax to match gdb.
3005 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
3007 * Makefile.in: canonicalize install.sh; for use within
3008 this directory (and subdirs)
3010 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
3012 * Makefile.in (install, install-info): remove parentdir support,
3013 use INSTALL_XFORM; define INSTALL_XFORM
3015 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
3017 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
3019 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
3021 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
3022 * configure.in: No longer need to configure to get sysdep.h.
3023 * objcopy.c (copy_object): Fix symbol table handling.
3025 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
3027 * objcopy.c (filter_symbols): Cannot filter the symbols
3028 in place, because that confuses the relocs, so take separate
3029 parameter for output array.
3030 * objcopy.c (sympp): Make two variables: isympp and osympp.
3031 * objcopy.c (copy_object): Allocate separate array (osympp)
3032 for filtered symbols.
3034 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3036 * Makefile.in: change recursion test to presence of a configured
3039 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3041 * Makefile.in (underscore.c): Hack the backquoted command so it
3042 doesn't cause Solaris make to bomb.
3044 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
3046 * Makefile.in: added c++filt and objcopy to MANPAGES variable
3047 * .Sanitize: keep c++filt.1 and objcopy.1
3049 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3051 * Makefile.in: rename LOADLIBES to EXTRALIBS
3053 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
3055 * c++filt.1, objcopy.1: new man pages
3057 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
3059 * Makefile.in (install): Also install ar and ranlib in
3060 $(tooldir)/bin; needed for building libgcc.a.
3061 * objdump.c (objdump_print_address): Fix the check
3062 "coincidental" label matches by dis-allowing undefined
3065 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
3067 * biutils.texi: revised c++filt chapter
3069 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
3071 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
3073 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
3075 * objdump.c (slurp_symtab): Print warning for bad symbol table.
3076 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
3077 declarations and uses.
3079 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
3081 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3083 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
3084 Make global variables static.
3085 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
3086 (set_print_radix, set_output_format,
3087 print_{object_filename,archive_filename,archive_member,symbol_info}
3088 {bsd,sysv,posix}): New functions.
3089 (display_file, print_symbols): Call them.
3091 * ar.c: Improve error messages.
3093 * nm.c (main): Handle long options that just set a flag.
3095 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
3096 (main): Exit after printing the version number, per the GNU coding
3099 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
3101 * README, Makefile.in: Minor updates for 2.2.
3103 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
3105 * Makefile.in (underscore.c): Automatically generate
3106 (using nm) a file with the variable prepends_underscore.
3107 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
3108 so that initial underscores get removed iff appropriate.
3109 * binutils.texi: Preliminary documentation for c++filt.
3110 * Makefile.in, binutils.texi: Set to version 2.2.
3112 * NEWS: Mention copy->objcopy renaming and new c++filt program.
3114 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
3116 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
3117 demangler via cplus-dem.o, rather than directly from the .c file.
3119 * objcopy.c: Renamed from copy.c, updated comments accordingly.
3120 * Makefile.in, binutils.texi: Renamed copy to objcopy.
3121 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
3122 rename of copy to objcopy.
3124 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
3126 * binutils.texi (strip, -v option): Fix typo.
3128 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
3130 * Makefile.in (RUNTEST): Define.
3131 (FLAGS_TO_PASS): Pass down RUNTEST.
3133 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
3135 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
3136 (PROG): Also build and install COPY_PROG.
3138 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
3140 * Makefile.in: Change definition of $(tooldir) to match FSF.
3142 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3144 * size.c (usage): Add missing options.
3145 (main): Clean up option parser.
3147 * objdump.c (usage): Add missing options.
3148 (display_file): Print program name before calling
3151 * nm.c (usage): Add missing options.
3152 (main): Clean up option parser.
3153 (display_file): Print program name before calling
3156 * copy.c (copy_usage, strip_usage): Add missing options.
3158 * ar.c (usage): New function.
3160 (open_inarch, do_quick_append): Print program name before calling
3163 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
3165 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
3167 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
3169 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
3170 built binaries if they exist. (otherwise the path)
3172 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
3174 * Makefile.in: Changed check target to use DejaGnu.
3176 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
3178 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
3179 objdump.c: a29k and i960 are `disassemble' not `print'.
3181 * objdump.c: Rename print_address to objdump_print_address
3182 and change parameters.
3183 (disassemble_data): Use objdump_print_address.
3185 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3187 * objdump.c (disassemble_data): print_insn_sparc is now a
3188 `disassemble' not a `print'.
3189 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
3191 * objdump.c (disassemble_data): Use new read_memory_func stuff.
3193 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3195 * objdump.c (fprintf): Declaration of variadic function had better
3196 be a prototype for ANSI C systems.
3198 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3200 * Makefile.in: rename test-install to install-check
3202 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3204 * objdump.c (disassemble_data): Add H8500.
3206 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
3208 * objdump.c (usage): Mention long options.
3210 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
3212 * nm.c: Modify behavior of -o flag for archives to match
3213 BSD4.4 and Sunos 4: Prefix archive name before each line.
3215 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
3216 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
3217 * Makefile.in: Adjust accordingly.
3218 * objdump.c: Support new-style disassemblers (ones that use
3219 the interface of ../include/dis-asm.h).
3221 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
3223 * Makefile.in: When making tar file, remove texinfo/*,
3224 except for texinfo/texinfo.tex.
3225 * ardup.c: Add extern declaration of strdup.
3226 * Makefile.in (testsuite): Add 'else true' since otherwise
3227 Ultrix /bin/sh complains.
3229 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
3231 * Makefile.in: Set VERSION to 2.1.
3232 * README, NEWS: Updates.
3233 * nm.c: Add -v as a synonym for -V.
3235 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
3237 * configure.in: added testsuite to configdirs.
3238 * Makefile.in: added support for building testsuite.
3240 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
3242 * objdump.c (disassemble_data): Print function names when
3243 given by bfd_find_nearest_line. If not - still print
3246 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
3248 * binutils/testsuite: made modifications to testcases, etc., to allow
3249 them to work properly given the reorganization of deja-gnu and the
3250 relocation of the testcases from deja-gnu to a "tool" subdirectory.
3252 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3254 * objdump.c (dump_data): Free up section contents each time
3255 through the loop. Reported by minyard@bnr.ca.
3257 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
3259 * binutils/testsuite: Initial creation of binutils/testsuite.
3260 Migrated dejagnu testcases and support files for testing nm to
3261 binutils/testsuite from deja-gnu. These files were moved "as is"
3262 with no modifications. This migration is part of a major overhaul
3263 of dejagnu. The modifications to these testcases, etc., which
3264 will allow them to work with the new version of dejagnu will be
3265 made in a future update.
3267 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
3269 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
3270 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
3271 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
3273 * Makefile.in (PROGS): Add DEMANGLER_PROG.
3275 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
3277 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
3278 macro rather than checking for equality to bfd_com_section.
3280 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3282 * objdump.c (disassemble_data): Fix code to find first useless
3285 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3287 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
3288 Don't core dump if bfd_find_nearest_line returns false.
3290 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3292 * objdump.c (disassemble_data): know how to disassemble z8000s
3295 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
3297 * arsup.h (interactive), bucomm.h (program_name): Prefix
3298 with 'extern', to avoid warnings from some compilers.
3300 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
3302 * arparse.y: fix unnecessary shift/reduce
3304 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
3306 * Makefile.in: Make check depend on all.
3307 * Makefile.in (distclean): Remove sysdep.h.
3308 * size.c: Use %u format where appropriate.
3309 * objdump.c: Standardize: L_SET -> SEEK_SET.
3310 * objdump.c: Use new macro bfd_asymbol_bfd.
3311 * configure.in: Allow std-host as the default ${mys_host}.
3313 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3315 * Makefile.in: added dvi target, define and use TEXI2DVI
3317 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
3319 * Makefile.in (dist): Fix permissions before release.
3320 * size.c: Use bfd_size_type (and long) where appropriate.
3321 * ar.c: Make writing a map the default, to be compatible
3322 with SYSV and Posix.2. Remove some bogus kludges that
3323 handled __.SYMDEF directly.
3326 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3328 * Makefile.in: flex no longer needs the -S flag
3330 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3332 * ar.c (extract_file): utime needs a pointer to a utimbuf
3334 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
3335 the list (since some of the bfd/hosts/*.h files include other
3336 files from that directory)
3338 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
3340 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
3342 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
3344 Clean up some old BFD ansification macros.
3346 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
3347 It still remains as a local macro in gmalloc.c, which is derived
3348 from some other copy of GNU Malloc somewhere (FIXME).
3350 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
3352 * arsup.h: Declare extract_files.
3354 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
3356 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
3357 use utime and utimbuf structure, otherwise if USE_UTIME use utime
3358 and array of two longs, otherwise use utimes.
3360 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
3362 * binutils.tex: Document yesterday's changes to strip and copy.
3364 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
3366 * copy.c: Re-do command-line parsing to use getopt_long().
3367 Add long option names. Re-think option letters to be more
3369 * copy.c: New function filter_symbols() for stripping only
3370 debug-symbols and/or local symbols. Use these to support
3371 the previously-missing options of the old FSF strip.
3373 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
3375 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
3376 than repeating a copy of it here.
3378 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
3380 * copy.c (main): Even if is_strip, accept -d argument indicating
3381 alternate output format. Needed by gdb for Nindy.
3383 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
3385 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
3387 * binutils.texi: added documentation for "copy"
3389 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
3391 * Makefile.in (*clean rules): Some cleaning up.
3392 * Makefile.in (dist): Make diststuff in gprof for a dist.
3394 * ar.c (do_show_version): New function.
3395 * ar.c (main): Fix so "ar -V" works.
3397 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3399 * configure.in: now uses the cpu-vendor-os triple instead of
3402 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
3404 * i960-pinsn.c: Change bzero to memset.
3405 * sparc-pinsn.c: Change index to strchr.
3407 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
3409 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
3410 operands to memory management instructions, from WRS.
3412 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
3414 * Makefile.in (install): if $(tooldir) exists, install nm and
3415 strip in $(tooldir)/bin.
3417 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
3419 * Makefile.in: Let's call it version 2.0.
3421 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
3423 * Makefile.in: Bump to version 0.98.
3424 * TODO, README: Minor updates.
3426 * Makefile.in: Added mostlyclean, distclean rules,
3427 and cleaned up clean, realclean.
3429 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
3431 * Makefile.in: map program names through program_transform_name
3434 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
3436 * Makefile.in: Bump to versions 1.97.90.
3437 * cplus-dem.c: Removed. Was nowhere used - and if some
3438 programs are changed to to demangling should now use the
3439 versions in libiberty.
3441 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
3443 * configure.in: add we32k
3445 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3447 * ar.c (map_over_members): if the element of the archive has a
3448 null name, fill it in.
3450 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
3451 will be symbols and there aren't any.
3453 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
3455 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
3457 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
3459 * nm.c objdump.c: Added support for a +version (-V)
3460 to print the version number.
3462 * ar.c, copy.c: Added support for a -V option to print
3465 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
3467 * config/mh-apollo68v: removed -g from CC definition.
3469 * Makefile.in: always create installation directories.
3471 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
3473 * m68k-pinsn.c: Minor fix in style of output (don't use
3474 range to indicate floating point control registers).
3476 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
3478 * ar.c (main): Don't *always* set the verbose flag!
3480 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
3482 * copy.c: When is_strip (because it is invoked as the strip
3483 program), follow traditional argv processing:
3484 'strip file1 file2' now strips file1 and file2, rather
3485 than stripping file1 (as input), leaving output in file2.
3487 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
3489 * objdump.c (display_info, display_info_table): Call
3490 bfd_set_format() on dummy bfd before using it (twice).
3491 * ar.c: Make sure archive is created on command 'r'
3492 even when no elements are inserted. (Clean up and
3493 simplify some non-working related code.)
3495 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3497 * configure.in: hppa support doesn't assume hp OS (from sef).
3499 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3501 * configure.in: recognize hppa hosts (bsd & hpux), error messages
3502 to stderr, not stdout
3504 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3506 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
3507 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
3509 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3511 * Makefile.dos: removed rcsid.
3513 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3515 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
3517 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3519 * Makefile.in: Add program_suffix (parallel to program_prefix)
3521 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
3523 * nm.c (sorters): Lint. Remove excess whitespace.
3525 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
3527 * nm.c (valueof macro): Add missing parentheses.
3528 (Their lack screwed up numeric_forward().)
3530 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
3532 * objdump.c (dump_elf_stabs): Also dump .stab.index and
3533 .stab.excl sections.
3534 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
3535 * objdump.1, binutils.texi: Document new sections dumped.
3537 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
3539 * size.c, objdump.c, bucomm.c: Lint.
3541 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
3543 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
3544 .stab section from an ELF file. Installed under #ifdef
3545 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
3546 bfd-internals header files and such.
3547 * objdump.1, binutils.texi: Update for --stabs. Also fix
3548 objdump's doc to use -- rather than + for long options.
3549 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
3551 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3553 * objdump.c(display_info), patches from
3554 mohring@informatik.tu-muenchen.de to print the table much more
3557 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
3559 * objdump.c: Add another enum->int cast, for the sake of
3560 old compilers (such as PCC).
3562 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3564 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
3565 Add declaration of strdup().
3567 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
3569 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
3570 rules, since these are used when building a distribution.
3571 * Makefile.in (arlex.c): Don't re-direct output, since that
3572 leaves a bogus output files if it fails.
3574 * arlex.l: Make work with lex, for what it's worth.
3575 * Makefile.in: Better lex support.
3576 * Makefile.in (dist): Generate flex and bison outputs
3579 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3581 * Makefile.in: get BISON definition right.
3583 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
3585 * sanity.sh: default TMPDIR to ".".
3587 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
3589 * binutils.texi: add doc for ar command language.
3591 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3593 * arparse.y: make END call ar_end
3594 * arsup.c (ar_end): added, deletes temp file if archive session
3598 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3600 * Makefile.in: use bison & flex from ../ if they exist. Also,
3603 * sanity.sh: remove temporary directory when finished.
3605 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
3607 * Makefile.in: Bump to version 1.97.
3608 * ar.c: Declare errno for machines that need it.
3610 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
3612 * objdump.c (display_info): Handle error cases without coredump.
3613 Close the dummy temporary file we open in the loop.
3614 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
3616 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
3618 * Makefile.in: added test-install target.
3620 * sanity.sh: new file.
3622 * Makefile.in: use sanity test on make check.
3624 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
3626 * Makefile.in: rework CFLAGS so that they can be passed on the
3627 command line to make. Remove MINUS_G. Default CFLAGS to -g.
3629 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3631 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
3634 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
3636 * Makefile.in: added check target.
3638 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
3640 * Makefile.in: added clean-info target.
3642 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3644 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
3645 installed. added tooldir and program_prefix.
3647 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
3649 * Makefile.in, configure.in: removed traces of namesubdir,
3650 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
3651 copyrights to '92, changed some from Cygnus to FSF.
3653 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
3655 * Makefile.in: Bump version to 1.96, and remove -beta
3656 suffix from distribution name.
3657 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
3658 the signed value of a character (even if chars are unsigned).
3659 * sparc-pinsn.c: Add new operand types.
3661 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3663 * objdump.c (disassemble_data): don't print a section's contents
3664 if it's not loadable (eg bss)
3666 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3668 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
3669 displacements don't get printed as large +ve ones.
3671 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3673 * copy.c, nm.c, objdump.c, size.c : changed to use the
3677 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
3679 * bucomm.c (print_arelt_descr): Tweek the output format
3680 so that 'ar tv' output follows Posix 1003.2/D11.
3681 Output is now also identical to Sun's (except __.SYMDEF).
3683 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
3685 * Makefile.in: Make `make' output more readable.
3687 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
3689 * Makefile.in: Bump to version 1.94.
3691 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
3693 * ar.c: added "b" to fopens for dos
3694 * configdj.bat, makefile.dos new files from DJ
3696 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3698 * Makefile.in: infodir belongs in datadir.
3700 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
3702 * bucomm.h: created to hold prototypes of bucomm.c
3703 * objdump.h: created to hold prototyes of objdump.c
3704 * am29k-pinsn.c: include objdump.h
3705 * ar.c: include bucomm.h, get ar.h from the right place and
3707 * bucomm.c: defunize bfd_fatal
3708 * copy.c: include bucomm.h, lint.
3709 * i960-pinsn.h: include bucomm.h
3710 * m68k-pinsn.h: lint
3711 * nm.c: include bucomm.h, lint
3713 * sparc-pinsn.c: include objdump.h
3717 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3719 * Makefile.in: added standards.text support. install using
3720 INSTALL_PROGRAM and INSTALL_DATA.
3722 * configure.in: configure now does all of it's work from objdir so
3723 make file existence tests against ${srcdir}.
3725 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3727 * Makefile.in: idestdir and ddestdir go away. Added copyrights
3728 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
3729 and mandir now keyed off datadir by default.
3731 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
3733 * Makefile.in: Bump to version 1.93.
3734 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
3735 for make versions that provide half-baked VPATH-support (e.g. Sun's).
3736 * size.c: Improvements suggested by
3737 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
3738 - Don't emit (Berkeley) headers if no files were found.
3739 - Return a non-zero return code on failure.
3741 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
3743 Changes due to include file renaming:
3744 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
3745 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
3746 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
3747 * nm.c: stab.gnu.h -> aout/stab_gnu.h
3749 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
3751 * README: Mention MINIMIZE flag for bfd's make.
3753 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
3755 * README: Various improvements.
3757 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
3759 * Makefile.in: Bump to version 1.92.
3760 * version.c, Makefile.in: Get version string from Makefile.
3761 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
3762 Make the same change that we earlier did for ar/ranlib:
3763 Generate two different binaries for strip and copy and use
3764 a global variable with different values to distinguish
3765 ostrip from copy. (-1 means to use argv[0] to decide,
3766 so you can get the old behavior, but it is no longer the default).
3767 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
3768 * copy.c (main): If is_strip==-1, compare last 5 chars
3769 of argv[0], not the whole path.
3770 * copy.c (main): Return 0, not 1.
3771 * copy.c (setup_sections): Fix due to change in bfd_make_section
3772 now failing if asked for a duplicate section.
3773 * strip.c, ostrip.c: Removed obsolete files.
3774 * ar.c, not-ranlib.c, maybe-ranlib.c:
3775 Change encoding of is_ranlib variable to be consistent
3776 with is_strip for strip.copy (i.e -1 to means use argv[0]).
3778 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
3780 * version.c (program_version): Update to version 1.92.
3782 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
3784 * ar.c (get_pos_bfd): Previous fix was missing a "break".
3786 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
3788 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
3789 encodings. (Thaks to David Wood)
3791 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
3793 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
3794 * ar.c (get_pos_bfd): Fix to handling of before/after
3795 positioning options.
3796 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
3797 since libiberty contains vfprintf etc if otherwise missing.
3798 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
3799 type operands, as used by branch instructions.
3800 * nm.c: Delegate printing of symbols to BFD,
3801 by using bfd_print_symbol to do the formatting.
3803 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
3805 * ar.c (write_archive.c): added unlink before rename since some
3806 systems can't rename onto an existant file.
3808 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
3810 * nm.c: now doesn't crash if a symbol with no section and no
3813 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
3815 * Makefile.in, version.c: Bump to version 1.91.
3817 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
3819 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
3820 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
3821 * strip.c: Add or update Copyright notice.
3822 * TODO: Add note on 'nm -a'.
3823 * version.c: Update version number to 1.90.
3824 * Makefile.in: Fix making of documentation for dist.
3826 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
3829 * Makefile.in: New kludgy rules for making a tarfile.
3830 * Makefile.in: Fix bindir path.
3832 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
3834 * Makefile.in: add targets binutils.mm, binutils.me
3836 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
3838 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
3840 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
3842 * Makefile.in: add target "binutils.ms"
3844 * binutils.texinfo: minor restructuring for texi2roff comfort.
3846 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
3848 Restructure configuration scheme for bfd, binutils, ld.
3850 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
3851 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
3852 Change some config names to match other dirs.
3853 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
3855 * Makefile.in: Use -I. to get sysdep.h.
3857 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
3859 * nm.c (print_symbols): Handle NULL name field of symbol.
3860 * Makefile.in: Removed spurious comment.
3862 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
3864 * binutils.texinfo: minor typos, phrasing, formatting fixes.
3866 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
3868 * configure.in: Get host file from ../bfd/config, not config.
3869 * config/*: Remove config directory and its files.
3871 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
3873 * Makefile.in: new targets binutils.dvi, binutils.info
3875 * binutils.texinfo: remove most remaining FIXME's, delete
3876 references to __.SYMDEF by name
3879 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
3881 * objdump.c (print_address) Print addresses nicely.
3883 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
3885 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
3886 Make two different binaries for ar and ranlib, instead of
3887 distinguishing them at run time using argv[0].
3888 (Old behavior is still available if you "make ar_with_ranlib",
3889 but it is not the default.)
3890 * ranlib.sh (new): An alternative one-line
3891 shell implementation of ranlib.
3893 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
3895 * objdump.c: Cope with renames of a few BFD types & enums.
3897 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
3899 * binutils.texinfo: add new file (rudimentary docn)
3901 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
3903 * config/hmake-news: Add new file (for Sony NEWSOS3).
3904 * bucomm.c (fatal): Conditionally compile fatal() depending on
3905 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
3906 * objdump.c (dump_headers): Trivial output format change.
3907 * objdump.c (display_info): Loop over integers, not enums,
3908 to appease old compilers.
3910 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
3912 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
3914 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
3916 * objdump.c (print_address): Make disasembled output more
3917 consistent with gdb and as: Add 0x when printing hex.
3918 Don't print extra leading zeros.
3919 Attempt to not print "filename.o".
3920 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
3923 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
3925 * copy.c: Change =& constructs to = &, since they confuse older
3933 version-control: never
projects / platform / upstream / binutils.git / blob