1 /* BFD support for handling relocation entries.
2 Copyright (C) 1990-2019 Free Software Foundation, Inc.
3 Written by Cygnus Support.
5 This file is part of BFD, the Binary File Descriptor library.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
26 BFD maintains relocations in much the same way it maintains
27 symbols: they are left alone until required, then read in
28 en-masse and translated into an internal form. A common
29 routine <<bfd_perform_relocation>> acts upon the
30 canonical form to do the fixup.
32 Relocations are maintained on a per section basis,
33 while symbols are maintained on a per BFD basis.
35 All that a back end has to do to fit the BFD interface is to create
36 a <<struct reloc_cache_entry>> for each relocation
37 in a particular section, and fill in the right bits of the structures.
46 /* DO compile in the reloc_code name table from libbfd.h. */
47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
57 typedef arelent, howto manager, Relocations, Relocations
62 This is the structure of a relocation entry:
66 .typedef enum bfd_reloc_status
68 . {* No errors detected. Note - the value 2 is used so that it
69 . will not be mistaken for the boolean TRUE or FALSE values. *}
72 . {* The relocation was performed, but there was an overflow. *}
75 . {* The address to relocate was not within the section supplied. *}
76 . bfd_reloc_outofrange,
78 . {* Used by special functions. *}
81 . {* Unsupported relocation size requested. *}
82 . bfd_reloc_notsupported,
87 . {* The symbol to relocate against was undefined. *}
88 . bfd_reloc_undefined,
90 . {* The relocation was performed, but may not be ok. If this type is
91 . returned, the error_message argument to bfd_perform_relocation
95 . bfd_reloc_status_type;
97 .typedef const struct reloc_howto_struct reloc_howto_type;
99 .typedef struct reloc_cache_entry
101 . {* A pointer into the canonical table of pointers. *}
102 . struct bfd_symbol **sym_ptr_ptr;
104 . {* offset in section. *}
105 . bfd_size_type address;
107 . {* addend for relocation value. *}
110 . {* Pointer to how to perform the required relocation. *}
111 . reloc_howto_type *howto;
121 Here is a description of each of the fields within an <<arelent>>:
125 The symbol table pointer points to a pointer to the symbol
126 associated with the relocation request. It is the pointer
127 into the table returned by the back end's
128 <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
129 referenced through a pointer to a pointer so that tools like
130 the linker can fix up all the symbols of the same name by
131 modifying only one pointer. The relocation routine looks in
132 the symbol and uses the base of the section the symbol is
133 attached to and the value of the symbol as the initial
134 relocation offset. If the symbol pointer is zero, then the
135 section provided is looked up.
139 The <<address>> field gives the offset in bytes from the base of
140 the section data which owns the relocation record to the first
141 byte of relocatable information. The actual data relocated
142 will be relative to this point; for example, a relocation
143 type which modifies the bottom two bytes of a four byte word
144 would not touch the first byte pointed to in a big endian
149 The <<addend>> is a value provided by the back end to be added (!)
150 to the relocation offset. Its interpretation is dependent upon
151 the howto. For example, on the 68k the code:
156 | return foo[0x12345678];
159 Could be compiled into:
162 | moveb @@#12345678,d0
167 This could create a reloc pointing to <<foo>>, but leave the
168 offset in the data, something like:
170 |RELOCATION RECORDS FOR [.text]:
174 |00000000 4e56 fffc ; linkw fp,#-4
175 |00000004 1039 1234 5678 ; moveb @@#12345678,d0
176 |0000000a 49c0 ; extbl d0
177 |0000000c 4e5e ; unlk fp
180 Using coff and an 88k, some instructions don't have enough
181 space in them to represent the full address range, and
182 pointers have to be loaded in two parts. So you'd get something like:
184 | or.u r13,r0,hi16(_foo+0x12345678)
185 | ld.b r2,r13,lo16(_foo+0x12345678)
188 This should create two relocs, both pointing to <<_foo>>, and with
189 0x12340000 in their addend field. The data would consist of:
191 |RELOCATION RECORDS FOR [.text]:
193 |00000002 HVRT16 _foo+0x12340000
194 |00000006 LVRT16 _foo+0x12340000
196 |00000000 5da05678 ; or.u r13,r0,0x5678
197 |00000004 1c4d5678 ; ld.b r2,r13,0x5678
198 |00000008 f400c001 ; jmp r1
200 The relocation routine digs out the value from the data, adds
201 it to the addend to get the original offset, and then adds the
202 value of <<_foo>>. Note that all 32 bits have to be kept around
203 somewhere, to cope with carry from bit 15 to bit 16.
205 One further example is the sparc and the a.out format. The
206 sparc has a similar problem to the 88k, in that some
207 instructions don't have room for an entire offset, but on the
208 sparc the parts are created in odd sized lumps. The designers of
209 the a.out format chose to not use the data within the section
210 for storing part of the offset; all the offset is kept within
211 the reloc. Anything in the data should be ignored.
214 | sethi %hi(_foo+0x12345678),%g2
215 | ldsb [%g2+%lo(_foo+0x12345678)],%i0
219 Both relocs contain a pointer to <<foo>>, and the offsets
222 |RELOCATION RECORDS FOR [.text]:
224 |00000004 HI22 _foo+0x12345678
225 |00000008 LO10 _foo+0x12345678
227 |00000000 9de3bf90 ; save %sp,-112,%sp
228 |00000004 05000000 ; sethi %hi(_foo+0),%g2
229 |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
230 |0000000c 81c7e008 ; ret
231 |00000010 81e80000 ; restore
235 The <<howto>> field can be imagined as a
236 relocation instruction. It is a pointer to a structure which
237 contains information on what to do with all of the other
238 information in the reloc record and data section. A back end
239 would normally have a relocation instruction set and turn
240 relocations into pointers to the correct structure on input -
241 but it would be possible to create each howto field on demand.
247 <<enum complain_overflow>>
249 Indicates what sort of overflow checking should be done when
250 performing a relocation.
254 .enum complain_overflow
256 . {* Do not complain on overflow. *}
257 . complain_overflow_dont,
259 . {* Complain if the value overflows when considered as a signed
260 . number one bit larger than the field. ie. A bitfield of N bits
261 . is allowed to represent -2**n to 2**n-1. *}
262 . complain_overflow_bitfield,
264 . {* Complain if the value overflows when considered as a signed
266 . complain_overflow_signed,
268 . {* Complain if the value overflows when considered as an
269 . unsigned number. *}
270 . complain_overflow_unsigned
279 The <<reloc_howto_type>> is a structure which contains all the
280 information that libbfd needs to know to tie up a back end's data.
283 .struct reloc_howto_struct
285 . {* The type field has mainly a documentary use - the back end can
286 . do what it wants with it, though normally the back end's idea of
287 . an external reloc number is stored in this field. *}
290 . {* The encoded size of the item to be relocated. This is *not* a
291 . power-of-two measure. Use bfd_get_reloc_size to find the size
292 . of the item in bytes. *}
293 . unsigned int size:3;
295 . {* The number of bits in the field to be relocated. This is used
296 . when doing overflow checking. *}
297 . unsigned int bitsize:7;
299 . {* The value the final relocation is shifted right by. This drops
300 . unwanted data from the relocation. *}
301 . unsigned int rightshift:6;
303 . {* The bit position of the reloc value in the destination.
304 . The relocated value is left shifted by this amount. *}
305 . unsigned int bitpos:6;
307 . {* What type of overflow error should be checked for when
309 . ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;
311 . {* The relocation value should be negated before applying. *}
312 . unsigned int negate:1;
314 . {* The relocation is relative to the item being relocated. *}
315 . unsigned int pc_relative:1;
317 . {* Some formats record a relocation addend in the section contents
318 . rather than with the relocation. For ELF formats this is the
319 . distinction between USE_REL and USE_RELA (though the code checks
320 . for USE_REL == 1/0). The value of this field is TRUE if the
321 . addend is recorded with the section contents; when performing a
322 . partial link (ld -r) the section contents (the data) will be
323 . modified. The value of this field is FALSE if addends are
324 . recorded with the relocation (in arelent.addend); when performing
325 . a partial link the relocation will be modified.
326 . All relocations for all ELF USE_RELA targets should set this field
327 . to FALSE (values of TRUE should be looked on with suspicion).
328 . However, the converse is not true: not all relocations of all ELF
329 . USE_REL targets set this field to TRUE. Why this is so is peculiar
330 . to each particular target. For relocs that aren't used in partial
331 . links (e.g. GOT stuff) it doesn't matter what this is set to. *}
332 . unsigned int partial_inplace:1;
334 . {* When some formats create PC relative instructions, they leave
335 . the value of the pc of the place being relocated in the offset
336 . slot of the instruction, so that a PC relative relocation can
337 . be made just by adding in an ordinary offset (e.g., sun3 a.out).
338 . Some formats leave the displacement part of an instruction
339 . empty (e.g., ELF); this flag signals the fact. *}
340 . unsigned int pcrel_offset:1;
342 . {* src_mask selects the part of the instruction (or data) to be used
343 . in the relocation sum. If the target relocations don't have an
344 . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
345 . dst_mask to extract the addend from the section contents. If
346 . relocations do have an addend in the reloc, eg. ELF USE_RELA, this
347 . field should normally be zero. Non-zero values for ELF USE_RELA
348 . targets should be viewed with suspicion as normally the value in
349 . the dst_mask part of the section contents should be ignored. *}
352 . {* dst_mask selects which parts of the instruction (or data) are
353 . replaced with a relocated value. *}
356 . {* If this field is non null, then the supplied function is
357 . called rather than the normal function. This allows really
358 . strange relocation methods to be accommodated. *}
359 . bfd_reloc_status_type (*special_function)
360 . (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
363 . {* The textual name of the relocation type. *}
374 The HOWTO macro fills in a reloc_howto_type (a typedef for
375 const struct reloc_howto_struct).
377 .#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name, \
378 . inplace, src_mask, dst_mask, pcrel_off) \
379 . { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf, \
380 . size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }
383 This is used to fill in an empty howto entry in an array.
385 .#define EMPTY_HOWTO(C) \
386 . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
387 . NULL, FALSE, 0, 0, FALSE)
396 unsigned int bfd_get_reloc_size (reloc_howto_type *);
399 For a reloc_howto_type that operates on a fixed number of bytes,
400 this returns the number of bytes operated on.
404 bfd_get_reloc_size (reloc_howto_type *howto)
424 How relocs are tied together in an <<asection>>:
426 .typedef struct relent_chain
429 . struct relent_chain *next;
435 /* N_ONES produces N one bits, without overflowing machine arithmetic. */
436 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
443 bfd_reloc_status_type bfd_check_overflow
444 (enum complain_overflow how,
445 unsigned int bitsize,
446 unsigned int rightshift,
447 unsigned int addrsize,
451 Perform overflow checking on @var{relocation} which has
452 @var{bitsize} significant bits and will be shifted right by
453 @var{rightshift} bits, on a machine with addresses containing
454 @var{addrsize} significant bits. The result is either of
455 @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
459 bfd_reloc_status_type
460 bfd_check_overflow (enum complain_overflow how,
461 unsigned int bitsize,
462 unsigned int rightshift,
463 unsigned int addrsize,
466 bfd_vma fieldmask, addrmask, signmask, ss, a;
467 bfd_reloc_status_type flag = bfd_reloc_ok;
469 /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
470 we'll be permissive: extra bits in the field mask will
471 automatically extend the address mask for purposes of the
473 fieldmask = N_ONES (bitsize);
474 signmask = ~fieldmask;
475 addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
476 a = (relocation & addrmask) >> rightshift;
480 case complain_overflow_dont:
483 case complain_overflow_signed:
484 /* If any sign bits are set, all sign bits must be set. That
485 is, A must be a valid negative address after shifting. */
486 signmask = ~ (fieldmask >> 1);
489 case complain_overflow_bitfield:
490 /* Bitfields are sometimes signed, sometimes unsigned. We
491 explicitly allow an address wrap too, which means a bitfield
492 of n bits is allowed to store -2**n to 2**n-1. Thus overflow
493 if the value has some, but not all, bits set outside the
496 if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
497 flag = bfd_reloc_overflow;
500 case complain_overflow_unsigned:
501 /* We have an overflow if the address does not fit in the field. */
502 if ((a & signmask) != 0)
503 flag = bfd_reloc_overflow;
515 bfd_reloc_offset_in_range
518 bfd_boolean bfd_reloc_offset_in_range
519 (reloc_howto_type *howto,
522 bfd_size_type offset);
525 Returns TRUE if the reloc described by @var{HOWTO} can be
526 applied at @var{OFFSET} octets in @var{SECTION}.
530 /* HOWTO describes a relocation, at offset OCTET. Return whether the
531 relocation field is within SECTION of ABFD. */
534 bfd_reloc_offset_in_range (reloc_howto_type *howto,
539 bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
540 bfd_size_type reloc_size = bfd_get_reloc_size (howto);
542 /* The reloc field must be contained entirely within the section.
543 Allow zero length fields (marker relocs or NONE relocs where no
544 relocation will be performed) at the end of the section. */
545 return octet <= octet_end && octet + reloc_size <= octet_end;
548 /* Read and return the section contents at DATA converted to a host
549 integer (bfd_vma). The number of bytes read is given by the HOWTO. */
552 read_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto)
557 return bfd_get_8 (abfd, data);
560 return bfd_get_16 (abfd, data);
563 return bfd_get_32 (abfd, data);
570 return bfd_get_64 (abfd, data);
574 return bfd_get_24 (abfd, data);
582 /* Convert VAL to target format and write to DATA. The number of
583 bytes written is given by the HOWTO. */
586 write_reloc (bfd *abfd, bfd_vma val, bfd_byte *data, reloc_howto_type *howto)
591 bfd_put_8 (abfd, val, data);
595 bfd_put_16 (abfd, val, data);
599 bfd_put_32 (abfd, val, data);
607 bfd_put_64 (abfd, val, data);
612 bfd_put_24 (abfd, val, data);
620 /* Apply RELOCATION value to target bytes at DATA, according to
624 apply_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto,
627 bfd_vma val = read_reloc (abfd, data, howto);
630 relocation = -relocation;
632 val = ((val & ~howto->dst_mask)
633 | (((val & howto->src_mask) + relocation) & howto->dst_mask));
635 write_reloc (abfd, val, data, howto);
640 bfd_perform_relocation
643 bfd_reloc_status_type bfd_perform_relocation
645 arelent *reloc_entry,
647 asection *input_section,
649 char **error_message);
652 If @var{output_bfd} is supplied to this function, the
653 generated image will be relocatable; the relocations are
654 copied to the output file after they have been changed to
655 reflect the new state of the world. There are two ways of
656 reflecting the results of partial linkage in an output file:
657 by modifying the output data in place, and by modifying the
658 relocation record. Some native formats (e.g., basic a.out and
659 basic coff) have no way of specifying an addend in the
660 relocation type, so the addend has to go in the output data.
661 This is no big deal since in these formats the output data
662 slot will always be big enough for the addend. Complex reloc
663 types with addends were invented to solve just this problem.
664 The @var{error_message} argument is set to an error message if
665 this return @code{bfd_reloc_dangerous}.
669 bfd_reloc_status_type
670 bfd_perform_relocation (bfd *abfd,
671 arelent *reloc_entry,
673 asection *input_section,
675 char **error_message)
678 bfd_reloc_status_type flag = bfd_reloc_ok;
679 bfd_size_type octets;
680 bfd_vma output_base = 0;
681 reloc_howto_type *howto = reloc_entry->howto;
682 asection *reloc_target_output_section;
685 symbol = *(reloc_entry->sym_ptr_ptr);
687 /* If we are not producing relocatable output, return an error if
688 the symbol is not defined. An undefined weak symbol is
689 considered to have a value of zero (SVR4 ABI, p. 4-27). */
690 if (bfd_is_und_section (symbol->section)
691 && (symbol->flags & BSF_WEAK) == 0
692 && output_bfd == NULL)
693 flag = bfd_reloc_undefined;
695 /* If there is a function supplied to handle this relocation type,
696 call it. It'll return `bfd_reloc_continue' if further processing
698 if (howto && howto->special_function)
700 bfd_reloc_status_type cont;
702 /* Note - we do not call bfd_reloc_offset_in_range here as the
703 reloc_entry->address field might actually be valid for the
704 backend concerned. It is up to the special_function itself
705 to call bfd_reloc_offset_in_range if needed. */
706 cont = howto->special_function (abfd, reloc_entry, symbol, data,
707 input_section, output_bfd,
709 if (cont != bfd_reloc_continue)
713 if (bfd_is_abs_section (symbol->section)
714 && output_bfd != NULL)
716 reloc_entry->address += input_section->output_offset;
720 /* PR 17512: file: 0f67f69d. */
722 return bfd_reloc_undefined;
724 /* Is the address of the relocation really within the section? */
725 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
726 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
727 return bfd_reloc_outofrange;
729 /* Work out which section the relocation is targeted at and the
730 initial relocation command value. */
732 /* Get symbol value. (Common symbols are special.) */
733 if (bfd_is_com_section (symbol->section))
736 relocation = symbol->value;
738 reloc_target_output_section = symbol->section->output_section;
740 /* Convert input-section-relative symbol value to absolute. */
741 if ((output_bfd && ! howto->partial_inplace)
742 || reloc_target_output_section == NULL)
745 output_base = reloc_target_output_section->vma;
747 relocation += output_base + symbol->section->output_offset;
749 /* Add in supplied addend. */
750 relocation += reloc_entry->addend;
752 /* Here the variable relocation holds the final address of the
753 symbol we are relocating against, plus any addend. */
755 if (howto->pc_relative)
757 /* This is a PC relative relocation. We want to set RELOCATION
758 to the distance between the address of the symbol and the
759 location. RELOCATION is already the address of the symbol.
761 We start by subtracting the address of the section containing
764 If pcrel_offset is set, we must further subtract the position
765 of the location within the section. Some targets arrange for
766 the addend to be the negative of the position of the location
767 within the section; for example, i386-aout does this. For
768 i386-aout, pcrel_offset is FALSE. Some other targets do not
769 include the position of the location; for example, ELF.
770 For those targets, pcrel_offset is TRUE.
772 If we are producing relocatable output, then we must ensure
773 that this reloc will be correctly computed when the final
774 relocation is done. If pcrel_offset is FALSE we want to wind
775 up with the negative of the location within the section,
776 which means we must adjust the existing addend by the change
777 in the location within the section. If pcrel_offset is TRUE
778 we do not want to adjust the existing addend at all.
780 FIXME: This seems logical to me, but for the case of
781 producing relocatable output it is not what the code
782 actually does. I don't want to change it, because it seems
783 far too likely that something will break. */
786 input_section->output_section->vma + input_section->output_offset;
788 if (howto->pcrel_offset)
789 relocation -= reloc_entry->address;
792 if (output_bfd != NULL)
794 if (! howto->partial_inplace)
796 /* This is a partial relocation, and we want to apply the relocation
797 to the reloc entry rather than the raw data. Modify the reloc
798 inplace to reflect what we now know. */
799 reloc_entry->addend = relocation;
800 reloc_entry->address += input_section->output_offset;
805 /* This is a partial relocation, but inplace, so modify the
808 If we've relocated with a symbol with a section, change
809 into a ref to the section belonging to the symbol. */
811 reloc_entry->address += input_section->output_offset;
814 if (abfd->xvec->flavour == bfd_target_coff_flavour
815 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
816 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
818 /* For m68k-coff, the addend was being subtracted twice during
819 relocation with -r. Removing the line below this comment
820 fixes that problem; see PR 2953.
822 However, Ian wrote the following, regarding removing the line below,
823 which explains why it is still enabled: --djm
825 If you put a patch like that into BFD you need to check all the COFF
826 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
827 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
828 problem in a different way. There may very well be a reason that the
829 code works as it does.
831 Hmmm. The first obvious point is that bfd_perform_relocation should
832 not have any tests that depend upon the flavour. It's seem like
833 entirely the wrong place for such a thing. The second obvious point
834 is that the current code ignores the reloc addend when producing
835 relocatable output for COFF. That's peculiar. In fact, I really
836 have no idea what the point of the line you want to remove is.
838 A typical COFF reloc subtracts the old value of the symbol and adds in
839 the new value to the location in the object file (if it's a pc
840 relative reloc it adds the difference between the symbol value and the
841 location). When relocating we need to preserve that property.
843 BFD handles this by setting the addend to the negative of the old
844 value of the symbol. Unfortunately it handles common symbols in a
845 non-standard way (it doesn't subtract the old value) but that's a
846 different story (we can't change it without losing backward
847 compatibility with old object files) (coff-i386 does subtract the old
848 value, to be compatible with existing coff-i386 targets, like SCO).
850 So everything works fine when not producing relocatable output. When
851 we are producing relocatable output, logically we should do exactly
852 what we do when not producing relocatable output. Therefore, your
853 patch is correct. In fact, it should probably always just set
854 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
855 add the value into the object file. This won't hurt the COFF code,
856 which doesn't use the addend; I'm not sure what it will do to other
857 formats (the thing to check for would be whether any formats both use
858 the addend and set partial_inplace).
860 When I wanted to make coff-i386 produce relocatable output, I ran
861 into the problem that you are running into: I wanted to remove that
862 line. Rather than risk it, I made the coff-i386 relocs use a special
863 function; it's coff_i386_reloc in coff-i386.c. The function
864 specifically adds the addend field into the object file, knowing that
865 bfd_perform_relocation is not going to. If you remove that line, then
866 coff-i386.c will wind up adding the addend field in twice. It's
867 trivial to fix; it just needs to be done.
869 The problem with removing the line is just that it may break some
870 working code. With BFD it's hard to be sure of anything. The right
871 way to deal with this is simply to build and test at least all the
872 supported COFF targets. It should be straightforward if time and disk
873 space consuming. For each target:
875 2) generate some executable, and link it using -r (I would
876 probably use paranoia.o and link against newlib/libc.a, which
877 for all the supported targets would be available in
878 /usr/cygnus/progressive/H-host/target/lib/libc.a).
879 3) make the change to reloc.c
880 4) rebuild the linker
882 6) if the resulting object files are the same, you have at least
884 7) if they are different you have to figure out which version is
887 relocation -= reloc_entry->addend;
888 reloc_entry->addend = 0;
892 reloc_entry->addend = relocation;
897 /* FIXME: This overflow checking is incomplete, because the value
898 might have overflowed before we get here. For a correct check we
899 need to compute the value in a size larger than bitsize, but we
900 can't reasonably do that for a reloc the same size as a host
902 FIXME: We should also do overflow checking on the result after
903 adding in the value contained in the object file. */
904 if (howto->complain_on_overflow != complain_overflow_dont
905 && flag == bfd_reloc_ok)
906 flag = bfd_check_overflow (howto->complain_on_overflow,
909 bfd_arch_bits_per_address (abfd),
912 /* Either we are relocating all the way, or we don't want to apply
913 the relocation to the reloc entry (probably because there isn't
914 any room in the output format to describe addends to relocs). */
916 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
917 (OSF version 1.3, compiler version 3.11). It miscompiles the
931 x <<= (unsigned long) s.i0;
935 printf ("succeeded (%lx)\n", x);
939 relocation >>= (bfd_vma) howto->rightshift;
941 /* Shift everything up to where it's going to be used. */
942 relocation <<= (bfd_vma) howto->bitpos;
944 /* Wait for the day when all have the mask in them. */
947 i instruction to be left alone
948 o offset within instruction
949 r relocation offset to apply
958 (( i i i i i o o o o o from bfd_get<size>
959 and S S S S S) to get the size offset we want
960 + r r r r r r r r r r) to get the final value to place
961 and D D D D D to chop to right size
962 -----------------------
965 ( i i i i i o o o o o from bfd_get<size>
966 and N N N N N ) get instruction
967 -----------------------
973 -----------------------
974 = R R R R R R R R R R put into bfd_put<size>
977 data = (bfd_byte *) data + octets;
978 apply_reloc (abfd, data, howto, relocation);
984 bfd_install_relocation
987 bfd_reloc_status_type bfd_install_relocation
989 arelent *reloc_entry,
990 void *data, bfd_vma data_start,
991 asection *input_section,
992 char **error_message);
995 This looks remarkably like <<bfd_perform_relocation>>, except it
996 does not expect that the section contents have been filled in.
997 I.e., it's suitable for use when creating, rather than applying
1000 For now, this function should be considered reserved for the
1004 bfd_reloc_status_type
1005 bfd_install_relocation (bfd *abfd,
1006 arelent *reloc_entry,
1008 bfd_vma data_start_offset,
1009 asection *input_section,
1010 char **error_message)
1013 bfd_reloc_status_type flag = bfd_reloc_ok;
1014 bfd_size_type octets;
1015 bfd_vma output_base = 0;
1016 reloc_howto_type *howto = reloc_entry->howto;
1017 asection *reloc_target_output_section;
1021 symbol = *(reloc_entry->sym_ptr_ptr);
1023 /* If there is a function supplied to handle this relocation type,
1024 call it. It'll return `bfd_reloc_continue' if further processing
1026 if (howto && howto->special_function)
1028 bfd_reloc_status_type cont;
1030 /* Note - we do not call bfd_reloc_offset_in_range here as the
1031 reloc_entry->address field might actually be valid for the
1032 backend concerned. It is up to the special_function itself
1033 to call bfd_reloc_offset_in_range if needed. */
1034 /* XXX - The special_function calls haven't been fixed up to deal
1035 with creating new relocations and section contents. */
1036 cont = howto->special_function (abfd, reloc_entry, symbol,
1037 /* XXX - Non-portable! */
1038 ((bfd_byte *) data_start
1039 - data_start_offset),
1040 input_section, abfd, error_message);
1041 if (cont != bfd_reloc_continue)
1045 if (bfd_is_abs_section (symbol->section))
1047 reloc_entry->address += input_section->output_offset;
1048 return bfd_reloc_ok;
1051 /* No need to check for howto != NULL if !bfd_is_abs_section as
1052 it will have been checked in `bfd_perform_relocation already'. */
1054 /* Is the address of the relocation really within the section? */
1055 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1056 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
1057 return bfd_reloc_outofrange;
1059 /* Work out which section the relocation is targeted at and the
1060 initial relocation command value. */
1062 /* Get symbol value. (Common symbols are special.) */
1063 if (bfd_is_com_section (symbol->section))
1066 relocation = symbol->value;
1068 reloc_target_output_section = symbol->section->output_section;
1070 /* Convert input-section-relative symbol value to absolute. */
1071 if (! howto->partial_inplace)
1074 output_base = reloc_target_output_section->vma;
1076 relocation += output_base + symbol->section->output_offset;
1078 /* Add in supplied addend. */
1079 relocation += reloc_entry->addend;
1081 /* Here the variable relocation holds the final address of the
1082 symbol we are relocating against, plus any addend. */
1084 if (howto->pc_relative)
1086 /* This is a PC relative relocation. We want to set RELOCATION
1087 to the distance between the address of the symbol and the
1088 location. RELOCATION is already the address of the symbol.
1090 We start by subtracting the address of the section containing
1093 If pcrel_offset is set, we must further subtract the position
1094 of the location within the section. Some targets arrange for
1095 the addend to be the negative of the position of the location
1096 within the section; for example, i386-aout does this. For
1097 i386-aout, pcrel_offset is FALSE. Some other targets do not
1098 include the position of the location; for example, ELF.
1099 For those targets, pcrel_offset is TRUE.
1101 If we are producing relocatable output, then we must ensure
1102 that this reloc will be correctly computed when the final
1103 relocation is done. If pcrel_offset is FALSE we want to wind
1104 up with the negative of the location within the section,
1105 which means we must adjust the existing addend by the change
1106 in the location within the section. If pcrel_offset is TRUE
1107 we do not want to adjust the existing addend at all.
1109 FIXME: This seems logical to me, but for the case of
1110 producing relocatable output it is not what the code
1111 actually does. I don't want to change it, because it seems
1112 far too likely that something will break. */
1115 input_section->output_section->vma + input_section->output_offset;
1117 if (howto->pcrel_offset && howto->partial_inplace)
1118 relocation -= reloc_entry->address;
1121 if (! howto->partial_inplace)
1123 /* This is a partial relocation, and we want to apply the relocation
1124 to the reloc entry rather than the raw data. Modify the reloc
1125 inplace to reflect what we now know. */
1126 reloc_entry->addend = relocation;
1127 reloc_entry->address += input_section->output_offset;
1132 /* This is a partial relocation, but inplace, so modify the
1135 If we've relocated with a symbol with a section, change
1136 into a ref to the section belonging to the symbol. */
1137 reloc_entry->address += input_section->output_offset;
1140 if (abfd->xvec->flavour == bfd_target_coff_flavour
1141 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1142 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1145 /* For m68k-coff, the addend was being subtracted twice during
1146 relocation with -r. Removing the line below this comment
1147 fixes that problem; see PR 2953.
1149 However, Ian wrote the following, regarding removing the line below,
1150 which explains why it is still enabled: --djm
1152 If you put a patch like that into BFD you need to check all the COFF
1153 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
1154 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1155 problem in a different way. There may very well be a reason that the
1156 code works as it does.
1158 Hmmm. The first obvious point is that bfd_install_relocation should
1159 not have any tests that depend upon the flavour. It's seem like
1160 entirely the wrong place for such a thing. The second obvious point
1161 is that the current code ignores the reloc addend when producing
1162 relocatable output for COFF. That's peculiar. In fact, I really
1163 have no idea what the point of the line you want to remove is.
1165 A typical COFF reloc subtracts the old value of the symbol and adds in
1166 the new value to the location in the object file (if it's a pc
1167 relative reloc it adds the difference between the symbol value and the
1168 location). When relocating we need to preserve that property.
1170 BFD handles this by setting the addend to the negative of the old
1171 value of the symbol. Unfortunately it handles common symbols in a
1172 non-standard way (it doesn't subtract the old value) but that's a
1173 different story (we can't change it without losing backward
1174 compatibility with old object files) (coff-i386 does subtract the old
1175 value, to be compatible with existing coff-i386 targets, like SCO).
1177 So everything works fine when not producing relocatable output. When
1178 we are producing relocatable output, logically we should do exactly
1179 what we do when not producing relocatable output. Therefore, your
1180 patch is correct. In fact, it should probably always just set
1181 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1182 add the value into the object file. This won't hurt the COFF code,
1183 which doesn't use the addend; I'm not sure what it will do to other
1184 formats (the thing to check for would be whether any formats both use
1185 the addend and set partial_inplace).
1187 When I wanted to make coff-i386 produce relocatable output, I ran
1188 into the problem that you are running into: I wanted to remove that
1189 line. Rather than risk it, I made the coff-i386 relocs use a special
1190 function; it's coff_i386_reloc in coff-i386.c. The function
1191 specifically adds the addend field into the object file, knowing that
1192 bfd_install_relocation is not going to. If you remove that line, then
1193 coff-i386.c will wind up adding the addend field in twice. It's
1194 trivial to fix; it just needs to be done.
1196 The problem with removing the line is just that it may break some
1197 working code. With BFD it's hard to be sure of anything. The right
1198 way to deal with this is simply to build and test at least all the
1199 supported COFF targets. It should be straightforward if time and disk
1200 space consuming. For each target:
1202 2) generate some executable, and link it using -r (I would
1203 probably use paranoia.o and link against newlib/libc.a, which
1204 for all the supported targets would be available in
1205 /usr/cygnus/progressive/H-host/target/lib/libc.a).
1206 3) make the change to reloc.c
1207 4) rebuild the linker
1209 6) if the resulting object files are the same, you have at least
1211 7) if they are different you have to figure out which version is
1213 relocation -= reloc_entry->addend;
1214 /* FIXME: There should be no target specific code here... */
1215 if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1216 reloc_entry->addend = 0;
1220 reloc_entry->addend = relocation;
1224 /* FIXME: This overflow checking is incomplete, because the value
1225 might have overflowed before we get here. For a correct check we
1226 need to compute the value in a size larger than bitsize, but we
1227 can't reasonably do that for a reloc the same size as a host
1229 FIXME: We should also do overflow checking on the result after
1230 adding in the value contained in the object file. */
1231 if (howto->complain_on_overflow != complain_overflow_dont)
1232 flag = bfd_check_overflow (howto->complain_on_overflow,
1235 bfd_arch_bits_per_address (abfd),
1238 /* Either we are relocating all the way, or we don't want to apply
1239 the relocation to the reloc entry (probably because there isn't
1240 any room in the output format to describe addends to relocs). */
1242 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1243 (OSF version 1.3, compiler version 3.11). It miscompiles the
1257 x <<= (unsigned long) s.i0;
1259 printf ("failed\n");
1261 printf ("succeeded (%lx)\n", x);
1265 relocation >>= (bfd_vma) howto->rightshift;
1267 /* Shift everything up to where it's going to be used. */
1268 relocation <<= (bfd_vma) howto->bitpos;
1270 /* Wait for the day when all have the mask in them. */
1273 i instruction to be left alone
1274 o offset within instruction
1275 r relocation offset to apply
1284 (( i i i i i o o o o o from bfd_get<size>
1285 and S S S S S) to get the size offset we want
1286 + r r r r r r r r r r) to get the final value to place
1287 and D D D D D to chop to right size
1288 -----------------------
1291 ( i i i i i o o o o o from bfd_get<size>
1292 and N N N N N ) get instruction
1293 -----------------------
1299 -----------------------
1300 = R R R R R R R R R R put into bfd_put<size>
1303 data = (bfd_byte *) data_start + (octets - data_start_offset);
1304 apply_reloc (abfd, data, howto, relocation);
1308 /* This relocation routine is used by some of the backend linkers.
1309 They do not construct asymbol or arelent structures, so there is no
1310 reason for them to use bfd_perform_relocation. Also,
1311 bfd_perform_relocation is so hacked up it is easier to write a new
1312 function than to try to deal with it.
1314 This routine does a final relocation. Whether it is useful for a
1315 relocatable link depends upon how the object format defines
1318 FIXME: This routine ignores any special_function in the HOWTO,
1319 since the existing special_function values have been written for
1320 bfd_perform_relocation.
1322 HOWTO is the reloc howto information.
1323 INPUT_BFD is the BFD which the reloc applies to.
1324 INPUT_SECTION is the section which the reloc applies to.
1325 CONTENTS is the contents of the section.
1326 ADDRESS is the address of the reloc within INPUT_SECTION.
1327 VALUE is the value of the symbol the reloc refers to.
1328 ADDEND is the addend of the reloc. */
1330 bfd_reloc_status_type
1331 _bfd_final_link_relocate (reloc_howto_type *howto,
1333 asection *input_section,
1340 bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1342 /* Sanity check the address. */
1343 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
1344 return bfd_reloc_outofrange;
1346 /* This function assumes that we are dealing with a basic relocation
1347 against a symbol. We want to compute the value of the symbol to
1348 relocate to. This is just VALUE, the value of the symbol, plus
1349 ADDEND, any addend associated with the reloc. */
1350 relocation = value + addend;
1352 /* If the relocation is PC relative, we want to set RELOCATION to
1353 the distance between the symbol (currently in RELOCATION) and the
1354 location we are relocating. Some targets (e.g., i386-aout)
1355 arrange for the contents of the section to be the negative of the
1356 offset of the location within the section; for such targets
1357 pcrel_offset is FALSE. Other targets (e.g., ELF) simply leave
1358 the contents of the section as zero; for such targets
1359 pcrel_offset is TRUE. If pcrel_offset is FALSE we do not need to
1360 subtract out the offset of the location within the section (which
1361 is just ADDRESS). */
1362 if (howto->pc_relative)
1364 relocation -= (input_section->output_section->vma
1365 + input_section->output_offset);
1366 if (howto->pcrel_offset)
1367 relocation -= address;
1370 return _bfd_relocate_contents (howto, input_bfd, relocation,
1372 + address * bfd_octets_per_byte (input_bfd));
1375 /* Relocate a given location using a given value and howto. */
1377 bfd_reloc_status_type
1378 _bfd_relocate_contents (reloc_howto_type *howto,
1384 bfd_reloc_status_type flag;
1385 unsigned int rightshift = howto->rightshift;
1386 unsigned int bitpos = howto->bitpos;
1389 relocation = -relocation;
1391 /* Get the value we are going to relocate. */
1392 x = read_reloc (input_bfd, location, howto);
1394 /* Check for overflow. FIXME: We may drop bits during the addition
1395 which we don't check for. We must either check at every single
1396 operation, which would be tedious, or we must do the computations
1397 in a type larger than bfd_vma, which would be inefficient. */
1398 flag = bfd_reloc_ok;
1399 if (howto->complain_on_overflow != complain_overflow_dont)
1401 bfd_vma addrmask, fieldmask, signmask, ss;
1404 /* Get the values to be added together. For signed and unsigned
1405 relocations, we assume that all values should be truncated to
1406 the size of an address. For bitfields, all the bits matter.
1407 See also bfd_check_overflow. */
1408 fieldmask = N_ONES (howto->bitsize);
1409 signmask = ~fieldmask;
1410 addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1411 | (fieldmask << rightshift));
1412 a = (relocation & addrmask) >> rightshift;
1413 b = (x & howto->src_mask & addrmask) >> bitpos;
1414 addrmask >>= rightshift;
1416 switch (howto->complain_on_overflow)
1418 case complain_overflow_signed:
1419 /* If any sign bits are set, all sign bits must be set.
1420 That is, A must be a valid negative address after
1422 signmask = ~(fieldmask >> 1);
1425 case complain_overflow_bitfield:
1426 /* Much like the signed check, but for a field one bit
1427 wider. We allow a bitfield to represent numbers in the
1428 range -2**n to 2**n-1, where n is the number of bits in the
1429 field. Note that when bfd_vma is 32 bits, a 32-bit reloc
1430 can't overflow, which is exactly what we want. */
1432 if (ss != 0 && ss != (addrmask & signmask))
1433 flag = bfd_reloc_overflow;
1435 /* We only need this next bit of code if the sign bit of B
1436 is below the sign bit of A. This would only happen if
1437 SRC_MASK had fewer bits than BITSIZE. Note that if
1438 SRC_MASK has more bits than BITSIZE, we can get into
1439 trouble; we would need to verify that B is in range, as
1440 we do for A above. */
1441 ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1444 /* Set all the bits above the sign bit. */
1447 /* Now we can do the addition. */
1450 /* See if the result has the correct sign. Bits above the
1451 sign bit are junk now; ignore them. If the sum is
1452 positive, make sure we did not have all negative inputs;
1453 if the sum is negative, make sure we did not have all
1454 positive inputs. The test below looks only at the sign
1455 bits, and it really just
1456 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1458 We mask with addrmask here to explicitly allow an address
1459 wrap-around. The Linux kernel relies on it, and it is
1460 the only way to write assembler code which can run when
1461 loaded at a location 0x80000000 away from the location at
1462 which it is linked. */
1463 if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1464 flag = bfd_reloc_overflow;
1467 case complain_overflow_unsigned:
1468 /* Checking for an unsigned overflow is relatively easy:
1469 trim the addresses and add, and trim the result as well.
1470 Overflow is normally indicated when the result does not
1471 fit in the field. However, we also need to consider the
1472 case when, e.g., fieldmask is 0x7fffffff or smaller, an
1473 input is 0x80000000, and bfd_vma is only 32 bits; then we
1474 will get sum == 0, but there is an overflow, since the
1475 inputs did not fit in the field. Instead of doing a
1476 separate test, we can check for this by or-ing in the
1477 operands when testing for the sum overflowing its final
1479 sum = (a + b) & addrmask;
1480 if ((a | b | sum) & signmask)
1481 flag = bfd_reloc_overflow;
1489 /* Put RELOCATION in the right bits. */
1490 relocation >>= (bfd_vma) rightshift;
1491 relocation <<= (bfd_vma) bitpos;
1493 /* Add RELOCATION to the right bits of X. */
1494 x = ((x & ~howto->dst_mask)
1495 | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1497 /* Put the relocated value back in the object file. */
1498 write_reloc (input_bfd, x, location, howto);
1502 /* Clear a given location using a given howto, by applying a fixed relocation
1503 value and discarding any in-place addend. This is used for fixed-up
1504 relocations against discarded symbols, to make ignorable debug or unwind
1505 information more obvious. */
1507 bfd_reloc_status_type
1508 _bfd_clear_contents (reloc_howto_type *howto,
1510 asection *input_section,
1517 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
1518 return bfd_reloc_outofrange;
1520 /* Get the value we are going to relocate. */
1521 location = buf + off;
1522 x = read_reloc (input_bfd, location, howto);
1524 /* Zero out the unwanted bits of X. */
1525 x &= ~howto->dst_mask;
1527 /* For a range list, use 1 instead of 0 as placeholder. 0
1528 would terminate the list, hiding any later entries. */
1529 if (strcmp (bfd_get_section_name (input_bfd, input_section),
1530 ".debug_ranges") == 0
1531 && (howto->dst_mask & 1) != 0)
1534 /* Put the relocated value back in the object file. */
1535 write_reloc (input_bfd, x, location, howto);
1536 return bfd_reloc_ok;
1542 howto manager, , typedef arelent, Relocations
1547 When an application wants to create a relocation, but doesn't
1548 know what the target machine might call it, it can find out by
1549 using this bit of code.
1558 The insides of a reloc code. The idea is that, eventually, there
1559 will be one enumerator for every type of relocation we ever do.
1560 Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1561 return a howto pointer.
1563 This does mean that the application must determine the correct
1564 enumerator value; you can't get a howto pointer from a random set
1585 Basic absolute relocations of N bits.
1600 PC-relative relocations. Sometimes these are relative to the address
1601 of the relocation itself; sometimes they are relative to the start of
1602 the section containing the relocation. It depends on the specific target.
1607 Section relative relocations. Some targets need this for DWARF2.
1610 BFD_RELOC_32_GOT_PCREL
1612 BFD_RELOC_16_GOT_PCREL
1614 BFD_RELOC_8_GOT_PCREL
1620 BFD_RELOC_LO16_GOTOFF
1622 BFD_RELOC_HI16_GOTOFF
1624 BFD_RELOC_HI16_S_GOTOFF
1628 BFD_RELOC_64_PLT_PCREL
1630 BFD_RELOC_32_PLT_PCREL
1632 BFD_RELOC_24_PLT_PCREL
1634 BFD_RELOC_16_PLT_PCREL
1636 BFD_RELOC_8_PLT_PCREL
1644 BFD_RELOC_LO16_PLTOFF
1646 BFD_RELOC_HI16_PLTOFF
1648 BFD_RELOC_HI16_S_PLTOFF
1662 BFD_RELOC_68K_GLOB_DAT
1664 BFD_RELOC_68K_JMP_SLOT
1666 BFD_RELOC_68K_RELATIVE
1668 BFD_RELOC_68K_TLS_GD32
1670 BFD_RELOC_68K_TLS_GD16
1672 BFD_RELOC_68K_TLS_GD8
1674 BFD_RELOC_68K_TLS_LDM32
1676 BFD_RELOC_68K_TLS_LDM16
1678 BFD_RELOC_68K_TLS_LDM8
1680 BFD_RELOC_68K_TLS_LDO32
1682 BFD_RELOC_68K_TLS_LDO16
1684 BFD_RELOC_68K_TLS_LDO8
1686 BFD_RELOC_68K_TLS_IE32
1688 BFD_RELOC_68K_TLS_IE16
1690 BFD_RELOC_68K_TLS_IE8
1692 BFD_RELOC_68K_TLS_LE32
1694 BFD_RELOC_68K_TLS_LE16
1696 BFD_RELOC_68K_TLS_LE8
1698 Relocations used by 68K ELF.
1701 BFD_RELOC_32_BASEREL
1703 BFD_RELOC_16_BASEREL
1705 BFD_RELOC_LO16_BASEREL
1707 BFD_RELOC_HI16_BASEREL
1709 BFD_RELOC_HI16_S_BASEREL
1715 Linkage-table relative.
1720 Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1723 BFD_RELOC_32_PCREL_S2
1725 BFD_RELOC_16_PCREL_S2
1727 BFD_RELOC_23_PCREL_S2
1729 These PC-relative relocations are stored as word displacements --
1730 i.e., byte displacements shifted right two bits. The 30-bit word
1731 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1732 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1733 signed 16-bit displacement is used on the MIPS, and the 23-bit
1734 displacement is used on the Alpha.
1741 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1742 the target word. These are used on the SPARC.
1749 For systems that allocate a Global Pointer register, these are
1750 displacements off that register. These relocation types are
1751 handled specially, because the value the register will have is
1752 decided relatively late.
1757 BFD_RELOC_SPARC_WDISP22
1763 BFD_RELOC_SPARC_GOT10
1765 BFD_RELOC_SPARC_GOT13
1767 BFD_RELOC_SPARC_GOT22
1769 BFD_RELOC_SPARC_PC10
1771 BFD_RELOC_SPARC_PC22
1773 BFD_RELOC_SPARC_WPLT30
1775 BFD_RELOC_SPARC_COPY
1777 BFD_RELOC_SPARC_GLOB_DAT
1779 BFD_RELOC_SPARC_JMP_SLOT
1781 BFD_RELOC_SPARC_RELATIVE
1783 BFD_RELOC_SPARC_UA16
1785 BFD_RELOC_SPARC_UA32
1787 BFD_RELOC_SPARC_UA64
1789 BFD_RELOC_SPARC_GOTDATA_HIX22
1791 BFD_RELOC_SPARC_GOTDATA_LOX10
1793 BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1795 BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1797 BFD_RELOC_SPARC_GOTDATA_OP
1799 BFD_RELOC_SPARC_JMP_IREL
1801 BFD_RELOC_SPARC_IRELATIVE
1803 SPARC ELF relocations. There is probably some overlap with other
1804 relocation types already defined.
1807 BFD_RELOC_SPARC_BASE13
1809 BFD_RELOC_SPARC_BASE22
1811 I think these are specific to SPARC a.out (e.g., Sun 4).
1821 BFD_RELOC_SPARC_OLO10
1823 BFD_RELOC_SPARC_HH22
1825 BFD_RELOC_SPARC_HM10
1827 BFD_RELOC_SPARC_LM22
1829 BFD_RELOC_SPARC_PC_HH22
1831 BFD_RELOC_SPARC_PC_HM10
1833 BFD_RELOC_SPARC_PC_LM22
1835 BFD_RELOC_SPARC_WDISP16
1837 BFD_RELOC_SPARC_WDISP19
1845 BFD_RELOC_SPARC_DISP64
1848 BFD_RELOC_SPARC_PLT32
1850 BFD_RELOC_SPARC_PLT64
1852 BFD_RELOC_SPARC_HIX22
1854 BFD_RELOC_SPARC_LOX10
1862 BFD_RELOC_SPARC_REGISTER
1866 BFD_RELOC_SPARC_SIZE32
1868 BFD_RELOC_SPARC_SIZE64
1870 BFD_RELOC_SPARC_WDISP10
1875 BFD_RELOC_SPARC_REV32
1877 SPARC little endian relocation
1879 BFD_RELOC_SPARC_TLS_GD_HI22
1881 BFD_RELOC_SPARC_TLS_GD_LO10
1883 BFD_RELOC_SPARC_TLS_GD_ADD
1885 BFD_RELOC_SPARC_TLS_GD_CALL
1887 BFD_RELOC_SPARC_TLS_LDM_HI22
1889 BFD_RELOC_SPARC_TLS_LDM_LO10
1891 BFD_RELOC_SPARC_TLS_LDM_ADD
1893 BFD_RELOC_SPARC_TLS_LDM_CALL
1895 BFD_RELOC_SPARC_TLS_LDO_HIX22
1897 BFD_RELOC_SPARC_TLS_LDO_LOX10
1899 BFD_RELOC_SPARC_TLS_LDO_ADD
1901 BFD_RELOC_SPARC_TLS_IE_HI22
1903 BFD_RELOC_SPARC_TLS_IE_LO10
1905 BFD_RELOC_SPARC_TLS_IE_LD
1907 BFD_RELOC_SPARC_TLS_IE_LDX
1909 BFD_RELOC_SPARC_TLS_IE_ADD
1911 BFD_RELOC_SPARC_TLS_LE_HIX22
1913 BFD_RELOC_SPARC_TLS_LE_LOX10
1915 BFD_RELOC_SPARC_TLS_DTPMOD32
1917 BFD_RELOC_SPARC_TLS_DTPMOD64
1919 BFD_RELOC_SPARC_TLS_DTPOFF32
1921 BFD_RELOC_SPARC_TLS_DTPOFF64
1923 BFD_RELOC_SPARC_TLS_TPOFF32
1925 BFD_RELOC_SPARC_TLS_TPOFF64
1927 SPARC TLS relocations
1936 BFD_RELOC_SPU_IMM10W
1940 BFD_RELOC_SPU_IMM16W
1944 BFD_RELOC_SPU_PCREL9a
1946 BFD_RELOC_SPU_PCREL9b
1948 BFD_RELOC_SPU_PCREL16
1958 BFD_RELOC_SPU_ADD_PIC
1963 BFD_RELOC_ALPHA_GPDISP_HI16
1965 Alpha ECOFF and ELF relocations. Some of these treat the symbol or
1966 "addend" in some special way.
1967 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1968 writing; when reading, it will be the absolute section symbol. The
1969 addend is the displacement in bytes of the "lda" instruction from
1970 the "ldah" instruction (which is at the address of this reloc).
1972 BFD_RELOC_ALPHA_GPDISP_LO16
1974 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1975 with GPDISP_HI16 relocs. The addend is ignored when writing the
1976 relocations out, and is filled in with the file's GP value on
1977 reading, for convenience.
1980 BFD_RELOC_ALPHA_GPDISP
1982 The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1983 relocation except that there is no accompanying GPDISP_LO16
1987 BFD_RELOC_ALPHA_LITERAL
1989 BFD_RELOC_ALPHA_ELF_LITERAL
1991 BFD_RELOC_ALPHA_LITUSE
1993 The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1994 the assembler turns it into a LDQ instruction to load the address of
1995 the symbol, and then fills in a register in the real instruction.
1997 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1998 section symbol. The addend is ignored when writing, but is filled
1999 in with the file's GP value on reading, for convenience, as with the
2002 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2003 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2004 but it generates output not based on the position within the .got
2005 section, but relative to the GP value chosen for the file during the
2008 The LITUSE reloc, on the instruction using the loaded address, gives
2009 information to the linker that it might be able to use to optimize
2010 away some literal section references. The symbol is ignored (read
2011 as the absolute section symbol), and the "addend" indicates the type
2012 of instruction using the register:
2013 1 - "memory" fmt insn
2014 2 - byte-manipulation (byte offset reg)
2015 3 - jsr (target of branch)
2018 BFD_RELOC_ALPHA_HINT
2020 The HINT relocation indicates a value that should be filled into the
2021 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2022 prediction logic which may be provided on some processors.
2025 BFD_RELOC_ALPHA_LINKAGE
2027 The LINKAGE relocation outputs a linkage pair in the object file,
2028 which is filled by the linker.
2031 BFD_RELOC_ALPHA_CODEADDR
2033 The CODEADDR relocation outputs a STO_CA in the object file,
2034 which is filled by the linker.
2037 BFD_RELOC_ALPHA_GPREL_HI16
2039 BFD_RELOC_ALPHA_GPREL_LO16
2041 The GPREL_HI/LO relocations together form a 32-bit offset from the
2045 BFD_RELOC_ALPHA_BRSGP
2047 Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2048 share a common GP, and the target address is adjusted for
2049 STO_ALPHA_STD_GPLOAD.
2054 The NOP relocation outputs a NOP if the longword displacement
2055 between two procedure entry points is < 2^21.
2060 The BSR relocation outputs a BSR if the longword displacement
2061 between two procedure entry points is < 2^21.
2066 The LDA relocation outputs a LDA if the longword displacement
2067 between two procedure entry points is < 2^16.
2072 The BOH relocation outputs a BSR if the longword displacement
2073 between two procedure entry points is < 2^21, or else a hint.
2076 BFD_RELOC_ALPHA_TLSGD
2078 BFD_RELOC_ALPHA_TLSLDM
2080 BFD_RELOC_ALPHA_DTPMOD64
2082 BFD_RELOC_ALPHA_GOTDTPREL16
2084 BFD_RELOC_ALPHA_DTPREL64
2086 BFD_RELOC_ALPHA_DTPREL_HI16
2088 BFD_RELOC_ALPHA_DTPREL_LO16
2090 BFD_RELOC_ALPHA_DTPREL16
2092 BFD_RELOC_ALPHA_GOTTPREL16
2094 BFD_RELOC_ALPHA_TPREL64
2096 BFD_RELOC_ALPHA_TPREL_HI16
2098 BFD_RELOC_ALPHA_TPREL_LO16
2100 BFD_RELOC_ALPHA_TPREL16
2102 Alpha thread-local storage relocations.
2107 BFD_RELOC_MICROMIPS_JMP
2109 The MIPS jump instruction.
2112 BFD_RELOC_MIPS16_JMP
2114 The MIPS16 jump instruction.
2117 BFD_RELOC_MIPS16_GPREL
2119 MIPS16 GP relative reloc.
2124 High 16 bits of 32-bit value; simple reloc.
2129 High 16 bits of 32-bit value but the low 16 bits will be sign
2130 extended and added to form the final result. If the low 16
2131 bits form a negative number, we need to add one to the high value
2132 to compensate for the borrow when the low bits are added.
2140 BFD_RELOC_HI16_PCREL
2142 High 16 bits of 32-bit pc-relative value
2144 BFD_RELOC_HI16_S_PCREL
2146 High 16 bits of 32-bit pc-relative value, adjusted
2148 BFD_RELOC_LO16_PCREL
2150 Low 16 bits of pc-relative value
2153 BFD_RELOC_MIPS16_GOT16
2155 BFD_RELOC_MIPS16_CALL16
2157 Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2158 16-bit immediate fields
2160 BFD_RELOC_MIPS16_HI16
2162 MIPS16 high 16 bits of 32-bit value.
2164 BFD_RELOC_MIPS16_HI16_S
2166 MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2167 extended and added to form the final result. If the low 16
2168 bits form a negative number, we need to add one to the high value
2169 to compensate for the borrow when the low bits are added.
2171 BFD_RELOC_MIPS16_LO16
2176 BFD_RELOC_MIPS16_TLS_GD
2178 BFD_RELOC_MIPS16_TLS_LDM
2180 BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2182 BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2184 BFD_RELOC_MIPS16_TLS_GOTTPREL
2186 BFD_RELOC_MIPS16_TLS_TPREL_HI16
2188 BFD_RELOC_MIPS16_TLS_TPREL_LO16
2190 MIPS16 TLS relocations
2193 BFD_RELOC_MIPS_LITERAL
2195 BFD_RELOC_MICROMIPS_LITERAL
2197 Relocation against a MIPS literal section.
2200 BFD_RELOC_MICROMIPS_7_PCREL_S1
2202 BFD_RELOC_MICROMIPS_10_PCREL_S1
2204 BFD_RELOC_MICROMIPS_16_PCREL_S1
2206 microMIPS PC-relative relocations.
2209 BFD_RELOC_MIPS16_16_PCREL_S1
2211 MIPS16 PC-relative relocation.
2214 BFD_RELOC_MIPS_21_PCREL_S2
2216 BFD_RELOC_MIPS_26_PCREL_S2
2218 BFD_RELOC_MIPS_18_PCREL_S3
2220 BFD_RELOC_MIPS_19_PCREL_S2
2222 MIPS PC-relative relocations.
2225 BFD_RELOC_MICROMIPS_GPREL16
2227 BFD_RELOC_MICROMIPS_HI16
2229 BFD_RELOC_MICROMIPS_HI16_S
2231 BFD_RELOC_MICROMIPS_LO16
2233 microMIPS versions of generic BFD relocs.
2236 BFD_RELOC_MIPS_GOT16
2238 BFD_RELOC_MICROMIPS_GOT16
2240 BFD_RELOC_MIPS_CALL16
2242 BFD_RELOC_MICROMIPS_CALL16
2244 BFD_RELOC_MIPS_GOT_HI16
2246 BFD_RELOC_MICROMIPS_GOT_HI16
2248 BFD_RELOC_MIPS_GOT_LO16
2250 BFD_RELOC_MICROMIPS_GOT_LO16
2252 BFD_RELOC_MIPS_CALL_HI16
2254 BFD_RELOC_MICROMIPS_CALL_HI16
2256 BFD_RELOC_MIPS_CALL_LO16
2258 BFD_RELOC_MICROMIPS_CALL_LO16
2262 BFD_RELOC_MICROMIPS_SUB
2264 BFD_RELOC_MIPS_GOT_PAGE
2266 BFD_RELOC_MICROMIPS_GOT_PAGE
2268 BFD_RELOC_MIPS_GOT_OFST
2270 BFD_RELOC_MICROMIPS_GOT_OFST
2272 BFD_RELOC_MIPS_GOT_DISP
2274 BFD_RELOC_MICROMIPS_GOT_DISP
2276 BFD_RELOC_MIPS_SHIFT5
2278 BFD_RELOC_MIPS_SHIFT6
2280 BFD_RELOC_MIPS_INSERT_A
2282 BFD_RELOC_MIPS_INSERT_B
2284 BFD_RELOC_MIPS_DELETE
2286 BFD_RELOC_MIPS_HIGHEST
2288 BFD_RELOC_MICROMIPS_HIGHEST
2290 BFD_RELOC_MIPS_HIGHER
2292 BFD_RELOC_MICROMIPS_HIGHER
2294 BFD_RELOC_MIPS_SCN_DISP
2296 BFD_RELOC_MICROMIPS_SCN_DISP
2298 BFD_RELOC_MIPS_REL16
2300 BFD_RELOC_MIPS_RELGOT
2304 BFD_RELOC_MICROMIPS_JALR
2306 BFD_RELOC_MIPS_TLS_DTPMOD32
2308 BFD_RELOC_MIPS_TLS_DTPREL32
2310 BFD_RELOC_MIPS_TLS_DTPMOD64
2312 BFD_RELOC_MIPS_TLS_DTPREL64
2314 BFD_RELOC_MIPS_TLS_GD
2316 BFD_RELOC_MICROMIPS_TLS_GD
2318 BFD_RELOC_MIPS_TLS_LDM
2320 BFD_RELOC_MICROMIPS_TLS_LDM
2322 BFD_RELOC_MIPS_TLS_DTPREL_HI16
2324 BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2326 BFD_RELOC_MIPS_TLS_DTPREL_LO16
2328 BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2330 BFD_RELOC_MIPS_TLS_GOTTPREL
2332 BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2334 BFD_RELOC_MIPS_TLS_TPREL32
2336 BFD_RELOC_MIPS_TLS_TPREL64
2338 BFD_RELOC_MIPS_TLS_TPREL_HI16
2340 BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2342 BFD_RELOC_MIPS_TLS_TPREL_LO16
2344 BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2348 MIPS ELF relocations.
2354 BFD_RELOC_MIPS_JUMP_SLOT
2356 MIPS ELF relocations (VxWorks and PLT extensions).
2360 BFD_RELOC_MOXIE_10_PCREL
2362 Moxie ELF relocations.
2374 BFD_RELOC_FT32_RELAX
2382 BFD_RELOC_FT32_DIFF32
2384 FT32 ELF relocations.
2388 BFD_RELOC_FRV_LABEL16
2390 BFD_RELOC_FRV_LABEL24
2396 BFD_RELOC_FRV_GPREL12
2398 BFD_RELOC_FRV_GPRELU12
2400 BFD_RELOC_FRV_GPREL32
2402 BFD_RELOC_FRV_GPRELHI
2404 BFD_RELOC_FRV_GPRELLO
2412 BFD_RELOC_FRV_FUNCDESC
2414 BFD_RELOC_FRV_FUNCDESC_GOT12
2416 BFD_RELOC_FRV_FUNCDESC_GOTHI
2418 BFD_RELOC_FRV_FUNCDESC_GOTLO
2420 BFD_RELOC_FRV_FUNCDESC_VALUE
2422 BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2424 BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2426 BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2428 BFD_RELOC_FRV_GOTOFF12
2430 BFD_RELOC_FRV_GOTOFFHI
2432 BFD_RELOC_FRV_GOTOFFLO
2434 BFD_RELOC_FRV_GETTLSOFF
2436 BFD_RELOC_FRV_TLSDESC_VALUE
2438 BFD_RELOC_FRV_GOTTLSDESC12
2440 BFD_RELOC_FRV_GOTTLSDESCHI
2442 BFD_RELOC_FRV_GOTTLSDESCLO
2444 BFD_RELOC_FRV_TLSMOFF12
2446 BFD_RELOC_FRV_TLSMOFFHI
2448 BFD_RELOC_FRV_TLSMOFFLO
2450 BFD_RELOC_FRV_GOTTLSOFF12
2452 BFD_RELOC_FRV_GOTTLSOFFHI
2454 BFD_RELOC_FRV_GOTTLSOFFLO
2456 BFD_RELOC_FRV_TLSOFF
2458 BFD_RELOC_FRV_TLSDESC_RELAX
2460 BFD_RELOC_FRV_GETTLSOFF_RELAX
2462 BFD_RELOC_FRV_TLSOFF_RELAX
2464 BFD_RELOC_FRV_TLSMOFF
2466 Fujitsu Frv Relocations.
2470 BFD_RELOC_MN10300_GOTOFF24
2472 This is a 24bit GOT-relative reloc for the mn10300.
2474 BFD_RELOC_MN10300_GOT32
2476 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2479 BFD_RELOC_MN10300_GOT24
2481 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2484 BFD_RELOC_MN10300_GOT16
2486 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2489 BFD_RELOC_MN10300_COPY
2491 Copy symbol at runtime.
2493 BFD_RELOC_MN10300_GLOB_DAT
2497 BFD_RELOC_MN10300_JMP_SLOT
2501 BFD_RELOC_MN10300_RELATIVE
2503 Adjust by program base.
2505 BFD_RELOC_MN10300_SYM_DIFF
2507 Together with another reloc targeted at the same location,
2508 allows for a value that is the difference of two symbols
2509 in the same section.
2511 BFD_RELOC_MN10300_ALIGN
2513 The addend of this reloc is an alignment power that must
2514 be honoured at the offset's location, regardless of linker
2517 BFD_RELOC_MN10300_TLS_GD
2519 BFD_RELOC_MN10300_TLS_LD
2521 BFD_RELOC_MN10300_TLS_LDO
2523 BFD_RELOC_MN10300_TLS_GOTIE
2525 BFD_RELOC_MN10300_TLS_IE
2527 BFD_RELOC_MN10300_TLS_LE
2529 BFD_RELOC_MN10300_TLS_DTPMOD
2531 BFD_RELOC_MN10300_TLS_DTPOFF
2533 BFD_RELOC_MN10300_TLS_TPOFF
2535 Various TLS-related relocations.
2537 BFD_RELOC_MN10300_32_PCREL
2539 This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2542 BFD_RELOC_MN10300_16_PCREL
2544 This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2555 BFD_RELOC_386_GLOB_DAT
2557 BFD_RELOC_386_JUMP_SLOT
2559 BFD_RELOC_386_RELATIVE
2561 BFD_RELOC_386_GOTOFF
2565 BFD_RELOC_386_TLS_TPOFF
2567 BFD_RELOC_386_TLS_IE
2569 BFD_RELOC_386_TLS_GOTIE
2571 BFD_RELOC_386_TLS_LE
2573 BFD_RELOC_386_TLS_GD
2575 BFD_RELOC_386_TLS_LDM
2577 BFD_RELOC_386_TLS_LDO_32
2579 BFD_RELOC_386_TLS_IE_32
2581 BFD_RELOC_386_TLS_LE_32
2583 BFD_RELOC_386_TLS_DTPMOD32
2585 BFD_RELOC_386_TLS_DTPOFF32
2587 BFD_RELOC_386_TLS_TPOFF32
2589 BFD_RELOC_386_TLS_GOTDESC
2591 BFD_RELOC_386_TLS_DESC_CALL
2593 BFD_RELOC_386_TLS_DESC
2595 BFD_RELOC_386_IRELATIVE
2597 BFD_RELOC_386_GOT32X
2599 i386/elf relocations
2602 BFD_RELOC_X86_64_GOT32
2604 BFD_RELOC_X86_64_PLT32
2606 BFD_RELOC_X86_64_COPY
2608 BFD_RELOC_X86_64_GLOB_DAT
2610 BFD_RELOC_X86_64_JUMP_SLOT
2612 BFD_RELOC_X86_64_RELATIVE
2614 BFD_RELOC_X86_64_GOTPCREL
2616 BFD_RELOC_X86_64_32S
2618 BFD_RELOC_X86_64_DTPMOD64
2620 BFD_RELOC_X86_64_DTPOFF64
2622 BFD_RELOC_X86_64_TPOFF64
2624 BFD_RELOC_X86_64_TLSGD
2626 BFD_RELOC_X86_64_TLSLD
2628 BFD_RELOC_X86_64_DTPOFF32
2630 BFD_RELOC_X86_64_GOTTPOFF
2632 BFD_RELOC_X86_64_TPOFF32
2634 BFD_RELOC_X86_64_GOTOFF64
2636 BFD_RELOC_X86_64_GOTPC32
2638 BFD_RELOC_X86_64_GOT64
2640 BFD_RELOC_X86_64_GOTPCREL64
2642 BFD_RELOC_X86_64_GOTPC64
2644 BFD_RELOC_X86_64_GOTPLT64
2646 BFD_RELOC_X86_64_PLTOFF64
2648 BFD_RELOC_X86_64_GOTPC32_TLSDESC
2650 BFD_RELOC_X86_64_TLSDESC_CALL
2652 BFD_RELOC_X86_64_TLSDESC
2654 BFD_RELOC_X86_64_IRELATIVE
2656 BFD_RELOC_X86_64_PC32_BND
2658 BFD_RELOC_X86_64_PLT32_BND
2660 BFD_RELOC_X86_64_GOTPCRELX
2662 BFD_RELOC_X86_64_REX_GOTPCRELX
2664 x86-64/elf relocations
2667 BFD_RELOC_NS32K_IMM_8
2669 BFD_RELOC_NS32K_IMM_16
2671 BFD_RELOC_NS32K_IMM_32
2673 BFD_RELOC_NS32K_IMM_8_PCREL
2675 BFD_RELOC_NS32K_IMM_16_PCREL
2677 BFD_RELOC_NS32K_IMM_32_PCREL
2679 BFD_RELOC_NS32K_DISP_8
2681 BFD_RELOC_NS32K_DISP_16
2683 BFD_RELOC_NS32K_DISP_32
2685 BFD_RELOC_NS32K_DISP_8_PCREL
2687 BFD_RELOC_NS32K_DISP_16_PCREL
2689 BFD_RELOC_NS32K_DISP_32_PCREL
2694 BFD_RELOC_PDP11_DISP_8_PCREL
2696 BFD_RELOC_PDP11_DISP_6_PCREL
2701 BFD_RELOC_PJ_CODE_HI16
2703 BFD_RELOC_PJ_CODE_LO16
2705 BFD_RELOC_PJ_CODE_DIR16
2707 BFD_RELOC_PJ_CODE_DIR32
2709 BFD_RELOC_PJ_CODE_REL16
2711 BFD_RELOC_PJ_CODE_REL32
2713 Picojava relocs. Not all of these appear in object files.
2724 BFD_RELOC_PPC_B16_BRTAKEN
2726 BFD_RELOC_PPC_B16_BRNTAKEN
2730 BFD_RELOC_PPC_BA16_BRTAKEN
2732 BFD_RELOC_PPC_BA16_BRNTAKEN
2736 BFD_RELOC_PPC_GLOB_DAT
2738 BFD_RELOC_PPC_JMP_SLOT
2740 BFD_RELOC_PPC_RELATIVE
2742 BFD_RELOC_PPC_LOCAL24PC
2744 BFD_RELOC_PPC_EMB_NADDR32
2746 BFD_RELOC_PPC_EMB_NADDR16
2748 BFD_RELOC_PPC_EMB_NADDR16_LO
2750 BFD_RELOC_PPC_EMB_NADDR16_HI
2752 BFD_RELOC_PPC_EMB_NADDR16_HA
2754 BFD_RELOC_PPC_EMB_SDAI16
2756 BFD_RELOC_PPC_EMB_SDA2I16
2758 BFD_RELOC_PPC_EMB_SDA2REL
2760 BFD_RELOC_PPC_EMB_SDA21
2762 BFD_RELOC_PPC_EMB_MRKREF
2764 BFD_RELOC_PPC_EMB_RELSEC16
2766 BFD_RELOC_PPC_EMB_RELST_LO
2768 BFD_RELOC_PPC_EMB_RELST_HI
2770 BFD_RELOC_PPC_EMB_RELST_HA
2772 BFD_RELOC_PPC_EMB_BIT_FLD
2774 BFD_RELOC_PPC_EMB_RELSDA
2776 BFD_RELOC_PPC_VLE_REL8
2778 BFD_RELOC_PPC_VLE_REL15
2780 BFD_RELOC_PPC_VLE_REL24
2782 BFD_RELOC_PPC_VLE_LO16A
2784 BFD_RELOC_PPC_VLE_LO16D
2786 BFD_RELOC_PPC_VLE_HI16A
2788 BFD_RELOC_PPC_VLE_HI16D
2790 BFD_RELOC_PPC_VLE_HA16A
2792 BFD_RELOC_PPC_VLE_HA16D
2794 BFD_RELOC_PPC_VLE_SDA21
2796 BFD_RELOC_PPC_VLE_SDA21_LO
2798 BFD_RELOC_PPC_VLE_SDAREL_LO16A
2800 BFD_RELOC_PPC_VLE_SDAREL_LO16D
2802 BFD_RELOC_PPC_VLE_SDAREL_HI16A
2804 BFD_RELOC_PPC_VLE_SDAREL_HI16D
2806 BFD_RELOC_PPC_VLE_SDAREL_HA16A
2808 BFD_RELOC_PPC_VLE_SDAREL_HA16D
2810 BFD_RELOC_PPC_16DX_HA
2812 BFD_RELOC_PPC_REL16DX_HA
2814 BFD_RELOC_PPC64_HIGHER
2816 BFD_RELOC_PPC64_HIGHER_S
2818 BFD_RELOC_PPC64_HIGHEST
2820 BFD_RELOC_PPC64_HIGHEST_S
2822 BFD_RELOC_PPC64_TOC16_LO
2824 BFD_RELOC_PPC64_TOC16_HI
2826 BFD_RELOC_PPC64_TOC16_HA
2830 BFD_RELOC_PPC64_PLTGOT16
2832 BFD_RELOC_PPC64_PLTGOT16_LO
2834 BFD_RELOC_PPC64_PLTGOT16_HI
2836 BFD_RELOC_PPC64_PLTGOT16_HA
2838 BFD_RELOC_PPC64_ADDR16_DS
2840 BFD_RELOC_PPC64_ADDR16_LO_DS
2842 BFD_RELOC_PPC64_GOT16_DS
2844 BFD_RELOC_PPC64_GOT16_LO_DS
2846 BFD_RELOC_PPC64_PLT16_LO_DS
2848 BFD_RELOC_PPC64_SECTOFF_DS
2850 BFD_RELOC_PPC64_SECTOFF_LO_DS
2852 BFD_RELOC_PPC64_TOC16_DS
2854 BFD_RELOC_PPC64_TOC16_LO_DS
2856 BFD_RELOC_PPC64_PLTGOT16_DS
2858 BFD_RELOC_PPC64_PLTGOT16_LO_DS
2860 BFD_RELOC_PPC64_ADDR16_HIGH
2862 BFD_RELOC_PPC64_ADDR16_HIGHA
2864 BFD_RELOC_PPC64_REL16_HIGH
2866 BFD_RELOC_PPC64_REL16_HIGHA
2868 BFD_RELOC_PPC64_REL16_HIGHER
2870 BFD_RELOC_PPC64_REL16_HIGHERA
2872 BFD_RELOC_PPC64_REL16_HIGHEST
2874 BFD_RELOC_PPC64_REL16_HIGHESTA
2876 BFD_RELOC_PPC64_ADDR64_LOCAL
2878 BFD_RELOC_PPC64_ENTRY
2880 BFD_RELOC_PPC64_REL24_NOTOC
2884 BFD_RELOC_PPC64_D34_LO
2886 BFD_RELOC_PPC64_D34_HI30
2888 BFD_RELOC_PPC64_D34_HA30
2890 BFD_RELOC_PPC64_PCREL34
2892 BFD_RELOC_PPC64_GOT_PCREL34
2894 BFD_RELOC_PPC64_PLT_PCREL34
2896 BFD_RELOC_PPC64_ADDR16_HIGHER34
2898 BFD_RELOC_PPC64_ADDR16_HIGHERA34
2900 BFD_RELOC_PPC64_ADDR16_HIGHEST34
2902 BFD_RELOC_PPC64_ADDR16_HIGHESTA34
2904 BFD_RELOC_PPC64_REL16_HIGHER34
2906 BFD_RELOC_PPC64_REL16_HIGHERA34
2908 BFD_RELOC_PPC64_REL16_HIGHEST34
2910 BFD_RELOC_PPC64_REL16_HIGHESTA34
2914 BFD_RELOC_PPC64_PCREL28
2916 Power(rs6000) and PowerPC relocations.
2925 BFD_RELOC_PPC_DTPMOD
2927 BFD_RELOC_PPC_TPREL16
2929 BFD_RELOC_PPC_TPREL16_LO
2931 BFD_RELOC_PPC_TPREL16_HI
2933 BFD_RELOC_PPC_TPREL16_HA
2937 BFD_RELOC_PPC_DTPREL16
2939 BFD_RELOC_PPC_DTPREL16_LO
2941 BFD_RELOC_PPC_DTPREL16_HI
2943 BFD_RELOC_PPC_DTPREL16_HA
2945 BFD_RELOC_PPC_DTPREL
2947 BFD_RELOC_PPC_GOT_TLSGD16
2949 BFD_RELOC_PPC_GOT_TLSGD16_LO
2951 BFD_RELOC_PPC_GOT_TLSGD16_HI
2953 BFD_RELOC_PPC_GOT_TLSGD16_HA
2955 BFD_RELOC_PPC_GOT_TLSLD16
2957 BFD_RELOC_PPC_GOT_TLSLD16_LO
2959 BFD_RELOC_PPC_GOT_TLSLD16_HI
2961 BFD_RELOC_PPC_GOT_TLSLD16_HA
2963 BFD_RELOC_PPC_GOT_TPREL16
2965 BFD_RELOC_PPC_GOT_TPREL16_LO
2967 BFD_RELOC_PPC_GOT_TPREL16_HI
2969 BFD_RELOC_PPC_GOT_TPREL16_HA
2971 BFD_RELOC_PPC_GOT_DTPREL16
2973 BFD_RELOC_PPC_GOT_DTPREL16_LO
2975 BFD_RELOC_PPC_GOT_DTPREL16_HI
2977 BFD_RELOC_PPC_GOT_DTPREL16_HA
2979 BFD_RELOC_PPC64_TPREL16_DS
2981 BFD_RELOC_PPC64_TPREL16_LO_DS
2983 BFD_RELOC_PPC64_TPREL16_HIGH
2985 BFD_RELOC_PPC64_TPREL16_HIGHA
2987 BFD_RELOC_PPC64_TPREL16_HIGHER
2989 BFD_RELOC_PPC64_TPREL16_HIGHERA
2991 BFD_RELOC_PPC64_TPREL16_HIGHEST
2993 BFD_RELOC_PPC64_TPREL16_HIGHESTA
2995 BFD_RELOC_PPC64_DTPREL16_DS
2997 BFD_RELOC_PPC64_DTPREL16_LO_DS
2999 BFD_RELOC_PPC64_DTPREL16_HIGH
3001 BFD_RELOC_PPC64_DTPREL16_HIGHA
3003 BFD_RELOC_PPC64_DTPREL16_HIGHER
3005 BFD_RELOC_PPC64_DTPREL16_HIGHERA
3007 BFD_RELOC_PPC64_DTPREL16_HIGHEST
3009 BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3011 PowerPC and PowerPC64 thread-local storage relocations.
3016 IBM 370/390 relocations
3021 The type of reloc used to build a constructor table - at the moment
3022 probably a 32 bit wide absolute relocation, but the target can choose.
3023 It generally does map to one of the other relocation types.
3026 BFD_RELOC_ARM_PCREL_BRANCH
3028 ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
3029 not stored in the instruction.
3031 BFD_RELOC_ARM_PCREL_BLX
3033 ARM 26 bit pc-relative branch. The lowest bit must be zero and is
3034 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3035 field in the instruction.
3037 BFD_RELOC_THUMB_PCREL_BLX
3039 Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
3040 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3041 field in the instruction.
3043 BFD_RELOC_ARM_PCREL_CALL
3045 ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3047 BFD_RELOC_ARM_PCREL_JUMP
3049 ARM 26-bit pc-relative branch for B or conditional BL instruction.
3052 BFD_RELOC_THUMB_PCREL_BRANCH5
3054 ARM 5-bit pc-relative branch for Branch Future instructions.
3057 BFD_RELOC_THUMB_PCREL_BFCSEL
3059 ARM 6-bit pc-relative branch for BFCSEL instruction.
3062 BFD_RELOC_ARM_THUMB_BF17
3064 ARM 17-bit pc-relative branch for Branch Future instructions.
3067 BFD_RELOC_ARM_THUMB_BF13
3069 ARM 13-bit pc-relative branch for BFCSEL instruction.
3072 BFD_RELOC_ARM_THUMB_BF19
3074 ARM 19-bit pc-relative branch for Branch Future Link instruction.
3077 BFD_RELOC_ARM_THUMB_LOOP12
3079 ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
3082 BFD_RELOC_THUMB_PCREL_BRANCH7
3084 BFD_RELOC_THUMB_PCREL_BRANCH9
3086 BFD_RELOC_THUMB_PCREL_BRANCH12
3088 BFD_RELOC_THUMB_PCREL_BRANCH20
3090 BFD_RELOC_THUMB_PCREL_BRANCH23
3092 BFD_RELOC_THUMB_PCREL_BRANCH25
3094 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3095 The lowest bit must be zero and is not stored in the instruction.
3096 Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3097 "nn" one smaller in all cases. Note further that BRANCH23
3098 corresponds to R_ARM_THM_CALL.
3101 BFD_RELOC_ARM_OFFSET_IMM
3103 12-bit immediate offset, used in ARM-format ldr and str instructions.
3106 BFD_RELOC_ARM_THUMB_OFFSET
3108 5-bit immediate offset, used in Thumb-format ldr and str instructions.
3111 BFD_RELOC_ARM_TARGET1
3113 Pc-relative or absolute relocation depending on target. Used for
3114 entries in .init_array sections.
3116 BFD_RELOC_ARM_ROSEGREL32
3118 Read-only segment base relative address.
3120 BFD_RELOC_ARM_SBREL32
3122 Data segment base relative address.
3124 BFD_RELOC_ARM_TARGET2
3126 This reloc is used for references to RTTI data from exception handling
3127 tables. The actual definition depends on the target. It may be a
3128 pc-relative or some form of GOT-indirect relocation.
3130 BFD_RELOC_ARM_PREL31
3132 31-bit PC relative address.
3138 BFD_RELOC_ARM_MOVW_PCREL
3140 BFD_RELOC_ARM_MOVT_PCREL
3142 BFD_RELOC_ARM_THUMB_MOVW
3144 BFD_RELOC_ARM_THUMB_MOVT
3146 BFD_RELOC_ARM_THUMB_MOVW_PCREL
3148 BFD_RELOC_ARM_THUMB_MOVT_PCREL
3150 Low and High halfword relocations for MOVW and MOVT instructions.
3153 BFD_RELOC_ARM_GOTFUNCDESC
3155 BFD_RELOC_ARM_GOTOFFFUNCDESC
3157 BFD_RELOC_ARM_FUNCDESC
3159 BFD_RELOC_ARM_FUNCDESC_VALUE
3161 BFD_RELOC_ARM_TLS_GD32_FDPIC
3163 BFD_RELOC_ARM_TLS_LDM32_FDPIC
3165 BFD_RELOC_ARM_TLS_IE32_FDPIC
3167 ARM FDPIC specific relocations.
3170 BFD_RELOC_ARM_JUMP_SLOT
3172 BFD_RELOC_ARM_GLOB_DAT
3178 BFD_RELOC_ARM_RELATIVE
3180 BFD_RELOC_ARM_GOTOFF
3184 BFD_RELOC_ARM_GOT_PREL
3186 Relocations for setting up GOTs and PLTs for shared libraries.
3189 BFD_RELOC_ARM_TLS_GD32
3191 BFD_RELOC_ARM_TLS_LDO32
3193 BFD_RELOC_ARM_TLS_LDM32
3195 BFD_RELOC_ARM_TLS_DTPOFF32
3197 BFD_RELOC_ARM_TLS_DTPMOD32
3199 BFD_RELOC_ARM_TLS_TPOFF32
3201 BFD_RELOC_ARM_TLS_IE32
3203 BFD_RELOC_ARM_TLS_LE32
3205 BFD_RELOC_ARM_TLS_GOTDESC
3207 BFD_RELOC_ARM_TLS_CALL
3209 BFD_RELOC_ARM_THM_TLS_CALL
3211 BFD_RELOC_ARM_TLS_DESCSEQ
3213 BFD_RELOC_ARM_THM_TLS_DESCSEQ
3215 BFD_RELOC_ARM_TLS_DESC
3217 ARM thread-local storage relocations.
3220 BFD_RELOC_ARM_ALU_PC_G0_NC
3222 BFD_RELOC_ARM_ALU_PC_G0
3224 BFD_RELOC_ARM_ALU_PC_G1_NC
3226 BFD_RELOC_ARM_ALU_PC_G1
3228 BFD_RELOC_ARM_ALU_PC_G2
3230 BFD_RELOC_ARM_LDR_PC_G0
3232 BFD_RELOC_ARM_LDR_PC_G1
3234 BFD_RELOC_ARM_LDR_PC_G2
3236 BFD_RELOC_ARM_LDRS_PC_G0
3238 BFD_RELOC_ARM_LDRS_PC_G1
3240 BFD_RELOC_ARM_LDRS_PC_G2
3242 BFD_RELOC_ARM_LDC_PC_G0
3244 BFD_RELOC_ARM_LDC_PC_G1
3246 BFD_RELOC_ARM_LDC_PC_G2
3248 BFD_RELOC_ARM_ALU_SB_G0_NC
3250 BFD_RELOC_ARM_ALU_SB_G0
3252 BFD_RELOC_ARM_ALU_SB_G1_NC
3254 BFD_RELOC_ARM_ALU_SB_G1
3256 BFD_RELOC_ARM_ALU_SB_G2
3258 BFD_RELOC_ARM_LDR_SB_G0
3260 BFD_RELOC_ARM_LDR_SB_G1
3262 BFD_RELOC_ARM_LDR_SB_G2
3264 BFD_RELOC_ARM_LDRS_SB_G0
3266 BFD_RELOC_ARM_LDRS_SB_G1
3268 BFD_RELOC_ARM_LDRS_SB_G2
3270 BFD_RELOC_ARM_LDC_SB_G0
3272 BFD_RELOC_ARM_LDC_SB_G1
3274 BFD_RELOC_ARM_LDC_SB_G2
3276 ARM group relocations.
3281 Annotation of BX instructions.
3284 BFD_RELOC_ARM_IRELATIVE
3286 ARM support for STT_GNU_IFUNC.
3289 BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3291 BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3293 BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3295 BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3297 Thumb1 relocations to support execute-only code.
3300 BFD_RELOC_ARM_IMMEDIATE
3302 BFD_RELOC_ARM_ADRL_IMMEDIATE
3304 BFD_RELOC_ARM_T32_IMMEDIATE
3306 BFD_RELOC_ARM_T32_ADD_IMM
3308 BFD_RELOC_ARM_T32_IMM12
3310 BFD_RELOC_ARM_T32_ADD_PC12
3312 BFD_RELOC_ARM_SHIFT_IMM
3322 BFD_RELOC_ARM_CP_OFF_IMM
3324 BFD_RELOC_ARM_CP_OFF_IMM_S2
3326 BFD_RELOC_ARM_T32_CP_OFF_IMM
3328 BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3330 BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
3332 BFD_RELOC_ARM_ADR_IMM
3334 BFD_RELOC_ARM_LDR_IMM
3336 BFD_RELOC_ARM_LITERAL
3338 BFD_RELOC_ARM_IN_POOL
3340 BFD_RELOC_ARM_OFFSET_IMM8
3342 BFD_RELOC_ARM_T32_OFFSET_U8
3344 BFD_RELOC_ARM_T32_OFFSET_IMM
3346 BFD_RELOC_ARM_HWLITERAL
3348 BFD_RELOC_ARM_THUMB_ADD
3350 BFD_RELOC_ARM_THUMB_IMM
3352 BFD_RELOC_ARM_THUMB_SHIFT
3354 These relocs are only used within the ARM assembler. They are not
3355 (at present) written to any object files.
3358 BFD_RELOC_SH_PCDISP8BY2
3360 BFD_RELOC_SH_PCDISP12BY2
3368 BFD_RELOC_SH_DISP12BY2
3370 BFD_RELOC_SH_DISP12BY4
3372 BFD_RELOC_SH_DISP12BY8
3376 BFD_RELOC_SH_DISP20BY8
3380 BFD_RELOC_SH_IMM4BY2
3382 BFD_RELOC_SH_IMM4BY4
3386 BFD_RELOC_SH_IMM8BY2
3388 BFD_RELOC_SH_IMM8BY4
3390 BFD_RELOC_SH_PCRELIMM8BY2
3392 BFD_RELOC_SH_PCRELIMM8BY4
3394 BFD_RELOC_SH_SWITCH16
3396 BFD_RELOC_SH_SWITCH32
3410 BFD_RELOC_SH_LOOP_START
3412 BFD_RELOC_SH_LOOP_END
3416 BFD_RELOC_SH_GLOB_DAT
3418 BFD_RELOC_SH_JMP_SLOT
3420 BFD_RELOC_SH_RELATIVE
3424 BFD_RELOC_SH_GOT_LOW16
3426 BFD_RELOC_SH_GOT_MEDLOW16
3428 BFD_RELOC_SH_GOT_MEDHI16
3430 BFD_RELOC_SH_GOT_HI16
3432 BFD_RELOC_SH_GOTPLT_LOW16
3434 BFD_RELOC_SH_GOTPLT_MEDLOW16
3436 BFD_RELOC_SH_GOTPLT_MEDHI16
3438 BFD_RELOC_SH_GOTPLT_HI16
3440 BFD_RELOC_SH_PLT_LOW16
3442 BFD_RELOC_SH_PLT_MEDLOW16
3444 BFD_RELOC_SH_PLT_MEDHI16
3446 BFD_RELOC_SH_PLT_HI16
3448 BFD_RELOC_SH_GOTOFF_LOW16
3450 BFD_RELOC_SH_GOTOFF_MEDLOW16
3452 BFD_RELOC_SH_GOTOFF_MEDHI16
3454 BFD_RELOC_SH_GOTOFF_HI16
3456 BFD_RELOC_SH_GOTPC_LOW16
3458 BFD_RELOC_SH_GOTPC_MEDLOW16
3460 BFD_RELOC_SH_GOTPC_MEDHI16
3462 BFD_RELOC_SH_GOTPC_HI16
3466 BFD_RELOC_SH_GLOB_DAT64
3468 BFD_RELOC_SH_JMP_SLOT64
3470 BFD_RELOC_SH_RELATIVE64
3472 BFD_RELOC_SH_GOT10BY4
3474 BFD_RELOC_SH_GOT10BY8
3476 BFD_RELOC_SH_GOTPLT10BY4
3478 BFD_RELOC_SH_GOTPLT10BY8
3480 BFD_RELOC_SH_GOTPLT32
3482 BFD_RELOC_SH_SHMEDIA_CODE
3488 BFD_RELOC_SH_IMMS6BY32
3494 BFD_RELOC_SH_IMMS10BY2
3496 BFD_RELOC_SH_IMMS10BY4
3498 BFD_RELOC_SH_IMMS10BY8
3504 BFD_RELOC_SH_IMM_LOW16
3506 BFD_RELOC_SH_IMM_LOW16_PCREL
3508 BFD_RELOC_SH_IMM_MEDLOW16
3510 BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3512 BFD_RELOC_SH_IMM_MEDHI16
3514 BFD_RELOC_SH_IMM_MEDHI16_PCREL
3516 BFD_RELOC_SH_IMM_HI16
3518 BFD_RELOC_SH_IMM_HI16_PCREL
3522 BFD_RELOC_SH_TLS_GD_32
3524 BFD_RELOC_SH_TLS_LD_32
3526 BFD_RELOC_SH_TLS_LDO_32
3528 BFD_RELOC_SH_TLS_IE_32
3530 BFD_RELOC_SH_TLS_LE_32
3532 BFD_RELOC_SH_TLS_DTPMOD32
3534 BFD_RELOC_SH_TLS_DTPOFF32
3536 BFD_RELOC_SH_TLS_TPOFF32
3540 BFD_RELOC_SH_GOTOFF20
3542 BFD_RELOC_SH_GOTFUNCDESC
3544 BFD_RELOC_SH_GOTFUNCDESC20
3546 BFD_RELOC_SH_GOTOFFFUNCDESC
3548 BFD_RELOC_SH_GOTOFFFUNCDESC20
3550 BFD_RELOC_SH_FUNCDESC
3552 Renesas / SuperH SH relocs. Not all of these appear in object files.
3575 BFD_RELOC_ARC_SECTOFF
3577 BFD_RELOC_ARC_S21H_PCREL
3579 BFD_RELOC_ARC_S21W_PCREL
3581 BFD_RELOC_ARC_S25H_PCREL
3583 BFD_RELOC_ARC_S25W_PCREL
3587 BFD_RELOC_ARC_SDA_LDST
3589 BFD_RELOC_ARC_SDA_LDST1
3591 BFD_RELOC_ARC_SDA_LDST2
3593 BFD_RELOC_ARC_SDA16_LD
3595 BFD_RELOC_ARC_SDA16_LD1
3597 BFD_RELOC_ARC_SDA16_LD2
3599 BFD_RELOC_ARC_S13_PCREL
3605 BFD_RELOC_ARC_32_ME_S
3607 BFD_RELOC_ARC_N32_ME
3609 BFD_RELOC_ARC_SECTOFF_ME
3611 BFD_RELOC_ARC_SDA32_ME
3615 BFD_RELOC_AC_SECTOFF_U8
3617 BFD_RELOC_AC_SECTOFF_U8_1
3619 BFD_RELOC_AC_SECTOFF_U8_2
3621 BFD_RELOC_AC_SECTOFF_S9
3623 BFD_RELOC_AC_SECTOFF_S9_1
3625 BFD_RELOC_AC_SECTOFF_S9_2
3627 BFD_RELOC_ARC_SECTOFF_ME_1
3629 BFD_RELOC_ARC_SECTOFF_ME_2
3631 BFD_RELOC_ARC_SECTOFF_1
3633 BFD_RELOC_ARC_SECTOFF_2
3635 BFD_RELOC_ARC_SDA_12
3637 BFD_RELOC_ARC_SDA16_ST2
3639 BFD_RELOC_ARC_32_PCREL
3645 BFD_RELOC_ARC_GOTPC32
3651 BFD_RELOC_ARC_GLOB_DAT
3653 BFD_RELOC_ARC_JMP_SLOT
3655 BFD_RELOC_ARC_RELATIVE
3657 BFD_RELOC_ARC_GOTOFF
3661 BFD_RELOC_ARC_S21W_PCREL_PLT
3663 BFD_RELOC_ARC_S25H_PCREL_PLT
3665 BFD_RELOC_ARC_TLS_DTPMOD
3667 BFD_RELOC_ARC_TLS_TPOFF
3669 BFD_RELOC_ARC_TLS_GD_GOT
3671 BFD_RELOC_ARC_TLS_GD_LD
3673 BFD_RELOC_ARC_TLS_GD_CALL
3675 BFD_RELOC_ARC_TLS_IE_GOT
3677 BFD_RELOC_ARC_TLS_DTPOFF
3679 BFD_RELOC_ARC_TLS_DTPOFF_S9
3681 BFD_RELOC_ARC_TLS_LE_S9
3683 BFD_RELOC_ARC_TLS_LE_32
3685 BFD_RELOC_ARC_S25W_PCREL_PLT
3687 BFD_RELOC_ARC_S21H_PCREL_PLT
3689 BFD_RELOC_ARC_NPS_CMEM16
3691 BFD_RELOC_ARC_JLI_SECTOFF
3696 BFD_RELOC_BFIN_16_IMM
3698 ADI Blackfin 16 bit immediate absolute reloc.
3700 BFD_RELOC_BFIN_16_HIGH
3702 ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3704 BFD_RELOC_BFIN_4_PCREL
3706 ADI Blackfin 'a' part of LSETUP.
3708 BFD_RELOC_BFIN_5_PCREL
3712 BFD_RELOC_BFIN_16_LOW
3714 ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3716 BFD_RELOC_BFIN_10_PCREL
3720 BFD_RELOC_BFIN_11_PCREL
3722 ADI Blackfin 'b' part of LSETUP.
3724 BFD_RELOC_BFIN_12_PCREL_JUMP
3728 BFD_RELOC_BFIN_12_PCREL_JUMP_S
3730 ADI Blackfin Short jump, pcrel.
3732 BFD_RELOC_BFIN_24_PCREL_CALL_X
3734 ADI Blackfin Call.x not implemented.
3736 BFD_RELOC_BFIN_24_PCREL_JUMP_L
3738 ADI Blackfin Long Jump pcrel.
3740 BFD_RELOC_BFIN_GOT17M4
3742 BFD_RELOC_BFIN_GOTHI
3744 BFD_RELOC_BFIN_GOTLO
3746 BFD_RELOC_BFIN_FUNCDESC
3748 BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3750 BFD_RELOC_BFIN_FUNCDESC_GOTHI
3752 BFD_RELOC_BFIN_FUNCDESC_GOTLO
3754 BFD_RELOC_BFIN_FUNCDESC_VALUE
3756 BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3758 BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3760 BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3762 BFD_RELOC_BFIN_GOTOFF17M4
3764 BFD_RELOC_BFIN_GOTOFFHI
3766 BFD_RELOC_BFIN_GOTOFFLO
3768 ADI Blackfin FD-PIC relocations.
3772 ADI Blackfin GOT relocation.
3774 BFD_RELOC_BFIN_PLTPC
3776 ADI Blackfin PLTPC relocation.
3778 BFD_ARELOC_BFIN_PUSH
3780 ADI Blackfin arithmetic relocation.
3782 BFD_ARELOC_BFIN_CONST
3784 ADI Blackfin arithmetic relocation.
3788 ADI Blackfin arithmetic relocation.
3792 ADI Blackfin arithmetic relocation.
3794 BFD_ARELOC_BFIN_MULT
3796 ADI Blackfin arithmetic relocation.
3800 ADI Blackfin arithmetic relocation.
3804 ADI Blackfin arithmetic relocation.
3806 BFD_ARELOC_BFIN_LSHIFT
3808 ADI Blackfin arithmetic relocation.
3810 BFD_ARELOC_BFIN_RSHIFT
3812 ADI Blackfin arithmetic relocation.
3816 ADI Blackfin arithmetic relocation.
3820 ADI Blackfin arithmetic relocation.
3824 ADI Blackfin arithmetic relocation.
3826 BFD_ARELOC_BFIN_LAND
3828 ADI Blackfin arithmetic relocation.
3832 ADI Blackfin arithmetic relocation.
3836 ADI Blackfin arithmetic relocation.
3840 ADI Blackfin arithmetic relocation.
3842 BFD_ARELOC_BFIN_COMP
3844 ADI Blackfin arithmetic relocation.
3846 BFD_ARELOC_BFIN_PAGE
3848 ADI Blackfin arithmetic relocation.
3850 BFD_ARELOC_BFIN_HWPAGE
3852 ADI Blackfin arithmetic relocation.
3854 BFD_ARELOC_BFIN_ADDR
3856 ADI Blackfin arithmetic relocation.
3859 BFD_RELOC_D10V_10_PCREL_R
3861 Mitsubishi D10V relocs.
3862 This is a 10-bit reloc with the right 2 bits
3865 BFD_RELOC_D10V_10_PCREL_L
3867 Mitsubishi D10V relocs.
3868 This is a 10-bit reloc with the right 2 bits
3869 assumed to be 0. This is the same as the previous reloc
3870 except it is in the left container, i.e.,
3871 shifted left 15 bits.
3875 This is an 18-bit reloc with the right 2 bits
3878 BFD_RELOC_D10V_18_PCREL
3880 This is an 18-bit reloc with the right 2 bits
3886 Mitsubishi D30V relocs.
3887 This is a 6-bit absolute reloc.
3889 BFD_RELOC_D30V_9_PCREL
3891 This is a 6-bit pc-relative reloc with
3892 the right 3 bits assumed to be 0.
3894 BFD_RELOC_D30V_9_PCREL_R
3896 This is a 6-bit pc-relative reloc with
3897 the right 3 bits assumed to be 0. Same
3898 as the previous reloc but on the right side
3903 This is a 12-bit absolute reloc with the
3904 right 3 bitsassumed to be 0.
3906 BFD_RELOC_D30V_15_PCREL
3908 This is a 12-bit pc-relative reloc with
3909 the right 3 bits assumed to be 0.
3911 BFD_RELOC_D30V_15_PCREL_R
3913 This is a 12-bit pc-relative reloc with
3914 the right 3 bits assumed to be 0. Same
3915 as the previous reloc but on the right side
3920 This is an 18-bit absolute reloc with
3921 the right 3 bits assumed to be 0.
3923 BFD_RELOC_D30V_21_PCREL
3925 This is an 18-bit pc-relative reloc with
3926 the right 3 bits assumed to be 0.
3928 BFD_RELOC_D30V_21_PCREL_R
3930 This is an 18-bit pc-relative reloc with
3931 the right 3 bits assumed to be 0. Same
3932 as the previous reloc but on the right side
3937 This is a 32-bit absolute reloc.
3939 BFD_RELOC_D30V_32_PCREL
3941 This is a 32-bit pc-relative reloc.
3944 BFD_RELOC_DLX_HI16_S
3959 BFD_RELOC_M32C_RL_JUMP
3961 BFD_RELOC_M32C_RL_1ADDR
3963 BFD_RELOC_M32C_RL_2ADDR
3965 Renesas M16C/M32C Relocations.
3970 Renesas M32R (formerly Mitsubishi M32R) relocs.
3971 This is a 24 bit absolute address.
3973 BFD_RELOC_M32R_10_PCREL
3975 This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3977 BFD_RELOC_M32R_18_PCREL
3979 This is an 18-bit reloc with the right 2 bits assumed to be 0.
3981 BFD_RELOC_M32R_26_PCREL
3983 This is a 26-bit reloc with the right 2 bits assumed to be 0.
3985 BFD_RELOC_M32R_HI16_ULO
3987 This is a 16-bit reloc containing the high 16 bits of an address
3988 used when the lower 16 bits are treated as unsigned.
3990 BFD_RELOC_M32R_HI16_SLO
3992 This is a 16-bit reloc containing the high 16 bits of an address
3993 used when the lower 16 bits are treated as signed.
3997 This is a 16-bit reloc containing the lower 16 bits of an address.
3999 BFD_RELOC_M32R_SDA16
4001 This is a 16-bit reloc containing the small data area offset for use in
4002 add3, load, and store instructions.
4004 BFD_RELOC_M32R_GOT24
4006 BFD_RELOC_M32R_26_PLTREL
4010 BFD_RELOC_M32R_GLOB_DAT
4012 BFD_RELOC_M32R_JMP_SLOT
4014 BFD_RELOC_M32R_RELATIVE
4016 BFD_RELOC_M32R_GOTOFF
4018 BFD_RELOC_M32R_GOTOFF_HI_ULO
4020 BFD_RELOC_M32R_GOTOFF_HI_SLO
4022 BFD_RELOC_M32R_GOTOFF_LO
4024 BFD_RELOC_M32R_GOTPC24
4026 BFD_RELOC_M32R_GOT16_HI_ULO
4028 BFD_RELOC_M32R_GOT16_HI_SLO
4030 BFD_RELOC_M32R_GOT16_LO
4032 BFD_RELOC_M32R_GOTPC_HI_ULO
4034 BFD_RELOC_M32R_GOTPC_HI_SLO
4036 BFD_RELOC_M32R_GOTPC_LO
4045 This is a 20 bit absolute address.
4047 BFD_RELOC_NDS32_9_PCREL
4049 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4051 BFD_RELOC_NDS32_WORD_9_PCREL
4053 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4055 BFD_RELOC_NDS32_15_PCREL
4057 This is an 15-bit reloc with the right 1 bit assumed to be 0.
4059 BFD_RELOC_NDS32_17_PCREL
4061 This is an 17-bit reloc with the right 1 bit assumed to be 0.
4063 BFD_RELOC_NDS32_25_PCREL
4065 This is a 25-bit reloc with the right 1 bit assumed to be 0.
4067 BFD_RELOC_NDS32_HI20
4069 This is a 20-bit reloc containing the high 20 bits of an address
4070 used with the lower 12 bits
4072 BFD_RELOC_NDS32_LO12S3
4074 This is a 12-bit reloc containing the lower 12 bits of an address
4075 then shift right by 3. This is used with ldi,sdi...
4077 BFD_RELOC_NDS32_LO12S2
4079 This is a 12-bit reloc containing the lower 12 bits of an address
4080 then shift left by 2. This is used with lwi,swi...
4082 BFD_RELOC_NDS32_LO12S1
4084 This is a 12-bit reloc containing the lower 12 bits of an address
4085 then shift left by 1. This is used with lhi,shi...
4087 BFD_RELOC_NDS32_LO12S0
4089 This is a 12-bit reloc containing the lower 12 bits of an address
4090 then shift left by 0. This is used with lbisbi...
4092 BFD_RELOC_NDS32_LO12S0_ORI
4094 This is a 12-bit reloc containing the lower 12 bits of an address
4095 then shift left by 0. This is only used with branch relaxations
4097 BFD_RELOC_NDS32_SDA15S3
4099 This is a 15-bit reloc containing the small data area 18-bit signed offset
4100 and shift left by 3 for use in ldi, sdi...
4102 BFD_RELOC_NDS32_SDA15S2
4104 This is a 15-bit reloc containing the small data area 17-bit signed offset
4105 and shift left by 2 for use in lwi, swi...
4107 BFD_RELOC_NDS32_SDA15S1
4109 This is a 15-bit reloc containing the small data area 16-bit signed offset
4110 and shift left by 1 for use in lhi, shi...
4112 BFD_RELOC_NDS32_SDA15S0
4114 This is a 15-bit reloc containing the small data area 15-bit signed offset
4115 and shift left by 0 for use in lbi, sbi...
4117 BFD_RELOC_NDS32_SDA16S3
4119 This is a 16-bit reloc containing the small data area 16-bit signed offset
4122 BFD_RELOC_NDS32_SDA17S2
4124 This is a 17-bit reloc containing the small data area 17-bit signed offset
4125 and shift left by 2 for use in lwi.gp, swi.gp...
4127 BFD_RELOC_NDS32_SDA18S1
4129 This is a 18-bit reloc containing the small data area 18-bit signed offset
4130 and shift left by 1 for use in lhi.gp, shi.gp...
4132 BFD_RELOC_NDS32_SDA19S0
4134 This is a 19-bit reloc containing the small data area 19-bit signed offset
4135 and shift left by 0 for use in lbi.gp, sbi.gp...
4137 BFD_RELOC_NDS32_GOT20
4139 BFD_RELOC_NDS32_9_PLTREL
4141 BFD_RELOC_NDS32_25_PLTREL
4143 BFD_RELOC_NDS32_COPY
4145 BFD_RELOC_NDS32_GLOB_DAT
4147 BFD_RELOC_NDS32_JMP_SLOT
4149 BFD_RELOC_NDS32_RELATIVE
4151 BFD_RELOC_NDS32_GOTOFF
4153 BFD_RELOC_NDS32_GOTOFF_HI20
4155 BFD_RELOC_NDS32_GOTOFF_LO12
4157 BFD_RELOC_NDS32_GOTPC20
4159 BFD_RELOC_NDS32_GOT_HI20
4161 BFD_RELOC_NDS32_GOT_LO12
4163 BFD_RELOC_NDS32_GOTPC_HI20
4165 BFD_RELOC_NDS32_GOTPC_LO12
4169 BFD_RELOC_NDS32_INSN16
4171 BFD_RELOC_NDS32_LABEL
4173 BFD_RELOC_NDS32_LONGCALL1
4175 BFD_RELOC_NDS32_LONGCALL2
4177 BFD_RELOC_NDS32_LONGCALL3
4179 BFD_RELOC_NDS32_LONGJUMP1
4181 BFD_RELOC_NDS32_LONGJUMP2
4183 BFD_RELOC_NDS32_LONGJUMP3
4185 BFD_RELOC_NDS32_LOADSTORE
4187 BFD_RELOC_NDS32_9_FIXED
4189 BFD_RELOC_NDS32_15_FIXED
4191 BFD_RELOC_NDS32_17_FIXED
4193 BFD_RELOC_NDS32_25_FIXED
4195 BFD_RELOC_NDS32_LONGCALL4
4197 BFD_RELOC_NDS32_LONGCALL5
4199 BFD_RELOC_NDS32_LONGCALL6
4201 BFD_RELOC_NDS32_LONGJUMP4
4203 BFD_RELOC_NDS32_LONGJUMP5
4205 BFD_RELOC_NDS32_LONGJUMP6
4207 BFD_RELOC_NDS32_LONGJUMP7
4211 BFD_RELOC_NDS32_PLTREL_HI20
4213 BFD_RELOC_NDS32_PLTREL_LO12
4215 BFD_RELOC_NDS32_PLT_GOTREL_HI20
4217 BFD_RELOC_NDS32_PLT_GOTREL_LO12
4221 BFD_RELOC_NDS32_SDA12S2_DP
4223 BFD_RELOC_NDS32_SDA12S2_SP
4225 BFD_RELOC_NDS32_LO12S2_DP
4227 BFD_RELOC_NDS32_LO12S2_SP
4231 BFD_RELOC_NDS32_DWARF2_OP1
4233 BFD_RELOC_NDS32_DWARF2_OP2
4235 BFD_RELOC_NDS32_DWARF2_LEB
4237 for dwarf2 debug_line.
4239 BFD_RELOC_NDS32_UPDATE_TA
4241 for eliminate 16-bit instructions
4243 BFD_RELOC_NDS32_PLT_GOTREL_LO20
4245 BFD_RELOC_NDS32_PLT_GOTREL_LO15
4247 BFD_RELOC_NDS32_PLT_GOTREL_LO19
4249 BFD_RELOC_NDS32_GOT_LO15
4251 BFD_RELOC_NDS32_GOT_LO19
4253 BFD_RELOC_NDS32_GOTOFF_LO15
4255 BFD_RELOC_NDS32_GOTOFF_LO19
4257 BFD_RELOC_NDS32_GOT15S2
4259 BFD_RELOC_NDS32_GOT17S2
4261 for PIC object relaxation
4266 This is a 5 bit absolute address.
4268 BFD_RELOC_NDS32_10_UPCREL
4270 This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4272 BFD_RELOC_NDS32_SDA_FP7U2_RELA
4274 If fp were omitted, fp can used as another gp.
4276 BFD_RELOC_NDS32_RELAX_ENTRY
4278 BFD_RELOC_NDS32_GOT_SUFF
4280 BFD_RELOC_NDS32_GOTOFF_SUFF
4282 BFD_RELOC_NDS32_PLT_GOT_SUFF
4284 BFD_RELOC_NDS32_MULCALL_SUFF
4288 BFD_RELOC_NDS32_PTR_COUNT
4290 BFD_RELOC_NDS32_PTR_RESOLVED
4292 BFD_RELOC_NDS32_PLTBLOCK
4294 BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4296 BFD_RELOC_NDS32_RELAX_REGION_END
4298 BFD_RELOC_NDS32_MINUEND
4300 BFD_RELOC_NDS32_SUBTRAHEND
4302 BFD_RELOC_NDS32_DIFF8
4304 BFD_RELOC_NDS32_DIFF16
4306 BFD_RELOC_NDS32_DIFF32
4308 BFD_RELOC_NDS32_DIFF_ULEB128
4310 BFD_RELOC_NDS32_EMPTY
4312 relaxation relative relocation types
4314 BFD_RELOC_NDS32_25_ABS
4316 This is a 25 bit absolute address.
4318 BFD_RELOC_NDS32_DATA
4320 BFD_RELOC_NDS32_TRAN
4322 BFD_RELOC_NDS32_17IFC_PCREL
4324 BFD_RELOC_NDS32_10IFCU_PCREL
4326 For ex9 and ifc using.
4328 BFD_RELOC_NDS32_TPOFF
4330 BFD_RELOC_NDS32_GOTTPOFF
4332 BFD_RELOC_NDS32_TLS_LE_HI20
4334 BFD_RELOC_NDS32_TLS_LE_LO12
4336 BFD_RELOC_NDS32_TLS_LE_20
4338 BFD_RELOC_NDS32_TLS_LE_15S0
4340 BFD_RELOC_NDS32_TLS_LE_15S1
4342 BFD_RELOC_NDS32_TLS_LE_15S2
4344 BFD_RELOC_NDS32_TLS_LE_ADD
4346 BFD_RELOC_NDS32_TLS_LE_LS
4348 BFD_RELOC_NDS32_TLS_IE_HI20
4350 BFD_RELOC_NDS32_TLS_IE_LO12
4352 BFD_RELOC_NDS32_TLS_IE_LO12S2
4354 BFD_RELOC_NDS32_TLS_IEGP_HI20
4356 BFD_RELOC_NDS32_TLS_IEGP_LO12
4358 BFD_RELOC_NDS32_TLS_IEGP_LO12S2
4360 BFD_RELOC_NDS32_TLS_IEGP_LW
4362 BFD_RELOC_NDS32_TLS_DESC
4364 BFD_RELOC_NDS32_TLS_DESC_HI20
4366 BFD_RELOC_NDS32_TLS_DESC_LO12
4368 BFD_RELOC_NDS32_TLS_DESC_20
4370 BFD_RELOC_NDS32_TLS_DESC_SDA17S2
4372 BFD_RELOC_NDS32_TLS_DESC_ADD
4374 BFD_RELOC_NDS32_TLS_DESC_FUNC
4376 BFD_RELOC_NDS32_TLS_DESC_CALL
4378 BFD_RELOC_NDS32_TLS_DESC_MEM
4380 BFD_RELOC_NDS32_REMOVE
4382 BFD_RELOC_NDS32_GROUP
4388 For floating load store relaxation.
4392 BFD_RELOC_V850_9_PCREL
4394 This is a 9-bit reloc
4396 BFD_RELOC_V850_22_PCREL
4398 This is a 22-bit reloc
4401 BFD_RELOC_V850_SDA_16_16_OFFSET
4403 This is a 16 bit offset from the short data area pointer.
4405 BFD_RELOC_V850_SDA_15_16_OFFSET
4407 This is a 16 bit offset (of which only 15 bits are used) from the
4408 short data area pointer.
4410 BFD_RELOC_V850_ZDA_16_16_OFFSET
4412 This is a 16 bit offset from the zero data area pointer.
4414 BFD_RELOC_V850_ZDA_15_16_OFFSET
4416 This is a 16 bit offset (of which only 15 bits are used) from the
4417 zero data area pointer.
4419 BFD_RELOC_V850_TDA_6_8_OFFSET
4421 This is an 8 bit offset (of which only 6 bits are used) from the
4422 tiny data area pointer.
4424 BFD_RELOC_V850_TDA_7_8_OFFSET
4426 This is an 8bit offset (of which only 7 bits are used) from the tiny
4429 BFD_RELOC_V850_TDA_7_7_OFFSET
4431 This is a 7 bit offset from the tiny data area pointer.
4433 BFD_RELOC_V850_TDA_16_16_OFFSET
4435 This is a 16 bit offset from the tiny data area pointer.
4438 BFD_RELOC_V850_TDA_4_5_OFFSET
4440 This is a 5 bit offset (of which only 4 bits are used) from the tiny
4443 BFD_RELOC_V850_TDA_4_4_OFFSET
4445 This is a 4 bit offset from the tiny data area pointer.
4447 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4449 This is a 16 bit offset from the short data area pointer, with the
4450 bits placed non-contiguously in the instruction.
4452 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4454 This is a 16 bit offset from the zero data area pointer, with the
4455 bits placed non-contiguously in the instruction.
4457 BFD_RELOC_V850_CALLT_6_7_OFFSET
4459 This is a 6 bit offset from the call table base pointer.
4461 BFD_RELOC_V850_CALLT_16_16_OFFSET
4463 This is a 16 bit offset from the call table base pointer.
4465 BFD_RELOC_V850_LONGCALL
4467 Used for relaxing indirect function calls.
4469 BFD_RELOC_V850_LONGJUMP
4471 Used for relaxing indirect jumps.
4473 BFD_RELOC_V850_ALIGN
4475 Used to maintain alignment whilst relaxing.
4477 BFD_RELOC_V850_LO16_SPLIT_OFFSET
4479 This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4482 BFD_RELOC_V850_16_PCREL
4484 This is a 16-bit reloc.
4486 BFD_RELOC_V850_17_PCREL
4488 This is a 17-bit reloc.
4492 This is a 23-bit reloc.
4494 BFD_RELOC_V850_32_PCREL
4496 This is a 32-bit reloc.
4498 BFD_RELOC_V850_32_ABS
4500 This is a 32-bit reloc.
4502 BFD_RELOC_V850_16_SPLIT_OFFSET
4504 This is a 16-bit reloc.
4506 BFD_RELOC_V850_16_S1
4508 This is a 16-bit reloc.
4510 BFD_RELOC_V850_LO16_S1
4512 Low 16 bits. 16 bit shifted by 1.
4514 BFD_RELOC_V850_CALLT_15_16_OFFSET
4516 This is a 16 bit offset from the call table base pointer.
4518 BFD_RELOC_V850_32_GOTPCREL
4522 BFD_RELOC_V850_16_GOT
4526 BFD_RELOC_V850_32_GOT
4530 BFD_RELOC_V850_22_PLT_PCREL
4534 BFD_RELOC_V850_32_PLT_PCREL
4542 BFD_RELOC_V850_GLOB_DAT
4546 BFD_RELOC_V850_JMP_SLOT
4550 BFD_RELOC_V850_RELATIVE
4554 BFD_RELOC_V850_16_GOTOFF
4558 BFD_RELOC_V850_32_GOTOFF
4573 This is a 8bit DP reloc for the tms320c30, where the most
4574 significant 8 bits of a 24 bit word are placed into the least
4575 significant 8 bits of the opcode.
4578 BFD_RELOC_TIC54X_PARTLS7
4580 This is a 7bit reloc for the tms320c54x, where the least
4581 significant 7 bits of a 16 bit word are placed into the least
4582 significant 7 bits of the opcode.
4585 BFD_RELOC_TIC54X_PARTMS9
4587 This is a 9bit DP reloc for the tms320c54x, where the most
4588 significant 9 bits of a 16 bit word are placed into the least
4589 significant 9 bits of the opcode.
4594 This is an extended address 23-bit reloc for the tms320c54x.
4597 BFD_RELOC_TIC54X_16_OF_23
4599 This is a 16-bit reloc for the tms320c54x, where the least
4600 significant 16 bits of a 23-bit extended address are placed into
4604 BFD_RELOC_TIC54X_MS7_OF_23
4606 This is a reloc for the tms320c54x, where the most
4607 significant 7 bits of a 23-bit extended address are placed into
4611 BFD_RELOC_C6000_PCR_S21
4613 BFD_RELOC_C6000_PCR_S12
4615 BFD_RELOC_C6000_PCR_S10
4617 BFD_RELOC_C6000_PCR_S7
4619 BFD_RELOC_C6000_ABS_S16
4621 BFD_RELOC_C6000_ABS_L16
4623 BFD_RELOC_C6000_ABS_H16
4625 BFD_RELOC_C6000_SBR_U15_B
4627 BFD_RELOC_C6000_SBR_U15_H
4629 BFD_RELOC_C6000_SBR_U15_W
4631 BFD_RELOC_C6000_SBR_S16
4633 BFD_RELOC_C6000_SBR_L16_B
4635 BFD_RELOC_C6000_SBR_L16_H
4637 BFD_RELOC_C6000_SBR_L16_W
4639 BFD_RELOC_C6000_SBR_H16_B
4641 BFD_RELOC_C6000_SBR_H16_H
4643 BFD_RELOC_C6000_SBR_H16_W
4645 BFD_RELOC_C6000_SBR_GOT_U15_W
4647 BFD_RELOC_C6000_SBR_GOT_L16_W
4649 BFD_RELOC_C6000_SBR_GOT_H16_W
4651 BFD_RELOC_C6000_DSBT_INDEX
4653 BFD_RELOC_C6000_PREL31
4655 BFD_RELOC_C6000_COPY
4657 BFD_RELOC_C6000_JUMP_SLOT
4659 BFD_RELOC_C6000_EHTYPE
4661 BFD_RELOC_C6000_PCR_H16
4663 BFD_RELOC_C6000_PCR_L16
4665 BFD_RELOC_C6000_ALIGN
4667 BFD_RELOC_C6000_FPHEAD
4669 BFD_RELOC_C6000_NOCMP
4671 TMS320C6000 relocations.
4676 This is a 48 bit reloc for the FR30 that stores 32 bits.
4680 This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4683 BFD_RELOC_FR30_6_IN_4
4685 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4688 BFD_RELOC_FR30_8_IN_8
4690 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4693 BFD_RELOC_FR30_9_IN_8
4695 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4698 BFD_RELOC_FR30_10_IN_8
4700 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4703 BFD_RELOC_FR30_9_PCREL
4705 This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4706 short offset into 8 bits.
4708 BFD_RELOC_FR30_12_PCREL
4710 This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4711 short offset into 11 bits.
4714 BFD_RELOC_MCORE_PCREL_IMM8BY4
4716 BFD_RELOC_MCORE_PCREL_IMM11BY2
4718 BFD_RELOC_MCORE_PCREL_IMM4BY2
4720 BFD_RELOC_MCORE_PCREL_32
4722 BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4726 Motorola Mcore relocations.
4735 BFD_RELOC_MEP_PCREL8A2
4737 BFD_RELOC_MEP_PCREL12A2
4739 BFD_RELOC_MEP_PCREL17A2
4741 BFD_RELOC_MEP_PCREL24A2
4743 BFD_RELOC_MEP_PCABS24A2
4755 BFD_RELOC_MEP_TPREL7
4757 BFD_RELOC_MEP_TPREL7A2
4759 BFD_RELOC_MEP_TPREL7A4
4761 BFD_RELOC_MEP_UIMM24
4763 BFD_RELOC_MEP_ADDR24A4
4765 BFD_RELOC_MEP_GNU_VTINHERIT
4767 BFD_RELOC_MEP_GNU_VTENTRY
4769 Toshiba Media Processor Relocations.
4773 BFD_RELOC_METAG_HIADDR16
4775 BFD_RELOC_METAG_LOADDR16
4777 BFD_RELOC_METAG_RELBRANCH
4779 BFD_RELOC_METAG_GETSETOFF
4781 BFD_RELOC_METAG_HIOG
4783 BFD_RELOC_METAG_LOOG
4785 BFD_RELOC_METAG_REL8
4787 BFD_RELOC_METAG_REL16
4789 BFD_RELOC_METAG_HI16_GOTOFF
4791 BFD_RELOC_METAG_LO16_GOTOFF
4793 BFD_RELOC_METAG_GETSET_GOTOFF
4795 BFD_RELOC_METAG_GETSET_GOT
4797 BFD_RELOC_METAG_HI16_GOTPC
4799 BFD_RELOC_METAG_LO16_GOTPC
4801 BFD_RELOC_METAG_HI16_PLT
4803 BFD_RELOC_METAG_LO16_PLT
4805 BFD_RELOC_METAG_RELBRANCH_PLT
4807 BFD_RELOC_METAG_GOTOFF
4811 BFD_RELOC_METAG_COPY
4813 BFD_RELOC_METAG_JMP_SLOT
4815 BFD_RELOC_METAG_RELATIVE
4817 BFD_RELOC_METAG_GLOB_DAT
4819 BFD_RELOC_METAG_TLS_GD
4821 BFD_RELOC_METAG_TLS_LDM
4823 BFD_RELOC_METAG_TLS_LDO_HI16
4825 BFD_RELOC_METAG_TLS_LDO_LO16
4827 BFD_RELOC_METAG_TLS_LDO
4829 BFD_RELOC_METAG_TLS_IE
4831 BFD_RELOC_METAG_TLS_IENONPIC
4833 BFD_RELOC_METAG_TLS_IENONPIC_HI16
4835 BFD_RELOC_METAG_TLS_IENONPIC_LO16
4837 BFD_RELOC_METAG_TLS_TPOFF
4839 BFD_RELOC_METAG_TLS_DTPMOD
4841 BFD_RELOC_METAG_TLS_DTPOFF
4843 BFD_RELOC_METAG_TLS_LE
4845 BFD_RELOC_METAG_TLS_LE_HI16
4847 BFD_RELOC_METAG_TLS_LE_LO16
4849 Imagination Technologies Meta relocations.
4854 BFD_RELOC_MMIX_GETA_1
4856 BFD_RELOC_MMIX_GETA_2
4858 BFD_RELOC_MMIX_GETA_3
4860 These are relocations for the GETA instruction.
4862 BFD_RELOC_MMIX_CBRANCH
4864 BFD_RELOC_MMIX_CBRANCH_J
4866 BFD_RELOC_MMIX_CBRANCH_1
4868 BFD_RELOC_MMIX_CBRANCH_2
4870 BFD_RELOC_MMIX_CBRANCH_3
4872 These are relocations for a conditional branch instruction.
4874 BFD_RELOC_MMIX_PUSHJ
4876 BFD_RELOC_MMIX_PUSHJ_1
4878 BFD_RELOC_MMIX_PUSHJ_2
4880 BFD_RELOC_MMIX_PUSHJ_3
4882 BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4884 These are relocations for the PUSHJ instruction.
4888 BFD_RELOC_MMIX_JMP_1
4890 BFD_RELOC_MMIX_JMP_2
4892 BFD_RELOC_MMIX_JMP_3
4894 These are relocations for the JMP instruction.
4896 BFD_RELOC_MMIX_ADDR19
4898 This is a relocation for a relative address as in a GETA instruction or
4901 BFD_RELOC_MMIX_ADDR27
4903 This is a relocation for a relative address as in a JMP instruction.
4905 BFD_RELOC_MMIX_REG_OR_BYTE
4907 This is a relocation for an instruction field that may be a general
4908 register or a value 0..255.
4912 This is a relocation for an instruction field that may be a general
4915 BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4917 This is a relocation for two instruction fields holding a register and
4918 an offset, the equivalent of the relocation.
4920 BFD_RELOC_MMIX_LOCAL
4922 This relocation is an assertion that the expression is not allocated as
4923 a global register. It does not modify contents.
4926 BFD_RELOC_AVR_7_PCREL
4928 This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4929 short offset into 7 bits.
4931 BFD_RELOC_AVR_13_PCREL
4933 This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4934 short offset into 12 bits.
4938 This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4939 program memory address) into 16 bits.
4941 BFD_RELOC_AVR_LO8_LDI
4943 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4944 data memory address) into 8 bit immediate value of LDI insn.
4946 BFD_RELOC_AVR_HI8_LDI
4948 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4949 of data memory address) into 8 bit immediate value of LDI insn.
4951 BFD_RELOC_AVR_HH8_LDI
4953 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4954 of program memory address) into 8 bit immediate value of LDI insn.
4956 BFD_RELOC_AVR_MS8_LDI
4958 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4959 of 32 bit value) into 8 bit immediate value of LDI insn.
4961 BFD_RELOC_AVR_LO8_LDI_NEG
4963 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4964 (usually data memory address) into 8 bit immediate value of SUBI insn.
4966 BFD_RELOC_AVR_HI8_LDI_NEG
4968 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4969 (high 8 bit of data memory address) into 8 bit immediate value of
4972 BFD_RELOC_AVR_HH8_LDI_NEG
4974 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4975 (most high 8 bit of program memory address) into 8 bit immediate value
4976 of LDI or SUBI insn.
4978 BFD_RELOC_AVR_MS8_LDI_NEG
4980 This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4981 of 32 bit value) into 8 bit immediate value of LDI insn.
4983 BFD_RELOC_AVR_LO8_LDI_PM
4985 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4986 command address) into 8 bit immediate value of LDI insn.
4988 BFD_RELOC_AVR_LO8_LDI_GS
4990 This is a 16 bit reloc for the AVR that stores 8 bit value
4991 (command address) into 8 bit immediate value of LDI insn. If the address
4992 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4995 BFD_RELOC_AVR_HI8_LDI_PM
4997 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4998 of command address) into 8 bit immediate value of LDI insn.
5000 BFD_RELOC_AVR_HI8_LDI_GS
5002 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5003 of command address) into 8 bit immediate value of LDI insn. If the address
5004 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5007 BFD_RELOC_AVR_HH8_LDI_PM
5009 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5010 of command address) into 8 bit immediate value of LDI insn.
5012 BFD_RELOC_AVR_LO8_LDI_PM_NEG
5014 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5015 (usually command address) into 8 bit immediate value of SUBI insn.
5017 BFD_RELOC_AVR_HI8_LDI_PM_NEG
5019 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5020 (high 8 bit of 16 bit command address) into 8 bit immediate value
5023 BFD_RELOC_AVR_HH8_LDI_PM_NEG
5025 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5026 (high 6 bit of 22 bit command address) into 8 bit immediate
5031 This is a 32 bit reloc for the AVR that stores 23 bit value
5036 This is a 16 bit reloc for the AVR that stores all needed bits
5037 for absolute addressing with ldi with overflow check to linktime
5041 This is a 6 bit reloc for the AVR that stores offset for ldd/std
5044 BFD_RELOC_AVR_6_ADIW
5046 This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5051 This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5052 in .byte lo8(symbol)
5056 This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5057 in .byte hi8(symbol)
5061 This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5062 in .byte hlo8(symbol)
5066 BFD_RELOC_AVR_DIFF16
5068 BFD_RELOC_AVR_DIFF32
5070 AVR relocations to mark the difference of two local symbols.
5071 These are only needed to support linker relaxation and can be ignored
5072 when not relaxing. The field is set to the value of the difference
5073 assuming no relaxation. The relocation encodes the position of the
5074 second symbol so the linker can determine whether to adjust the field
5077 BFD_RELOC_AVR_LDS_STS_16
5079 This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5080 lds and sts instructions supported only tiny core.
5084 This is a 6 bit reloc for the AVR that stores an I/O register
5085 number for the IN and OUT instructions
5089 This is a 5 bit reloc for the AVR that stores an I/O register
5090 number for the SBIC, SBIS, SBI and CBI instructions
5093 BFD_RELOC_RISCV_HI20
5095 BFD_RELOC_RISCV_PCREL_HI20
5097 BFD_RELOC_RISCV_PCREL_LO12_I
5099 BFD_RELOC_RISCV_PCREL_LO12_S
5101 BFD_RELOC_RISCV_LO12_I
5103 BFD_RELOC_RISCV_LO12_S
5105 BFD_RELOC_RISCV_GPREL12_I
5107 BFD_RELOC_RISCV_GPREL12_S
5109 BFD_RELOC_RISCV_TPREL_HI20
5111 BFD_RELOC_RISCV_TPREL_LO12_I
5113 BFD_RELOC_RISCV_TPREL_LO12_S
5115 BFD_RELOC_RISCV_TPREL_ADD
5117 BFD_RELOC_RISCV_CALL
5119 BFD_RELOC_RISCV_CALL_PLT
5121 BFD_RELOC_RISCV_ADD8
5123 BFD_RELOC_RISCV_ADD16
5125 BFD_RELOC_RISCV_ADD32
5127 BFD_RELOC_RISCV_ADD64
5129 BFD_RELOC_RISCV_SUB8
5131 BFD_RELOC_RISCV_SUB16
5133 BFD_RELOC_RISCV_SUB32
5135 BFD_RELOC_RISCV_SUB64
5137 BFD_RELOC_RISCV_GOT_HI20
5139 BFD_RELOC_RISCV_TLS_GOT_HI20
5141 BFD_RELOC_RISCV_TLS_GD_HI20
5145 BFD_RELOC_RISCV_TLS_DTPMOD32
5147 BFD_RELOC_RISCV_TLS_DTPREL32
5149 BFD_RELOC_RISCV_TLS_DTPMOD64
5151 BFD_RELOC_RISCV_TLS_DTPREL64
5153 BFD_RELOC_RISCV_TLS_TPREL32
5155 BFD_RELOC_RISCV_TLS_TPREL64
5157 BFD_RELOC_RISCV_ALIGN
5159 BFD_RELOC_RISCV_RVC_BRANCH
5161 BFD_RELOC_RISCV_RVC_JUMP
5163 BFD_RELOC_RISCV_RVC_LUI
5165 BFD_RELOC_RISCV_GPREL_I
5167 BFD_RELOC_RISCV_GPREL_S
5169 BFD_RELOC_RISCV_TPREL_I
5171 BFD_RELOC_RISCV_TPREL_S
5173 BFD_RELOC_RISCV_RELAX
5177 BFD_RELOC_RISCV_SUB6
5179 BFD_RELOC_RISCV_SET6
5181 BFD_RELOC_RISCV_SET8
5183 BFD_RELOC_RISCV_SET16
5185 BFD_RELOC_RISCV_SET32
5187 BFD_RELOC_RISCV_32_PCREL
5194 BFD_RELOC_RL78_NEG16
5196 BFD_RELOC_RL78_NEG24
5198 BFD_RELOC_RL78_NEG32
5200 BFD_RELOC_RL78_16_OP
5202 BFD_RELOC_RL78_24_OP
5204 BFD_RELOC_RL78_32_OP
5212 BFD_RELOC_RL78_DIR3U_PCREL
5216 BFD_RELOC_RL78_GPRELB
5218 BFD_RELOC_RL78_GPRELW
5220 BFD_RELOC_RL78_GPRELL
5224 BFD_RELOC_RL78_OP_SUBTRACT
5226 BFD_RELOC_RL78_OP_NEG
5228 BFD_RELOC_RL78_OP_AND
5230 BFD_RELOC_RL78_OP_SHRA
5234 BFD_RELOC_RL78_ABS16
5236 BFD_RELOC_RL78_ABS16_REV
5238 BFD_RELOC_RL78_ABS32
5240 BFD_RELOC_RL78_ABS32_REV
5242 BFD_RELOC_RL78_ABS16U
5244 BFD_RELOC_RL78_ABS16UW
5246 BFD_RELOC_RL78_ABS16UL
5248 BFD_RELOC_RL78_RELAX
5258 BFD_RELOC_RL78_SADDR
5260 Renesas RL78 Relocations.
5283 BFD_RELOC_RX_DIR3U_PCREL
5295 BFD_RELOC_RX_OP_SUBTRACT
5303 BFD_RELOC_RX_ABS16_REV
5307 BFD_RELOC_RX_ABS32_REV
5311 BFD_RELOC_RX_ABS16UW
5313 BFD_RELOC_RX_ABS16UL
5317 Renesas RX Relocations.
5330 32 bit PC relative PLT address.
5334 Copy symbol at runtime.
5336 BFD_RELOC_390_GLOB_DAT
5340 BFD_RELOC_390_JMP_SLOT
5344 BFD_RELOC_390_RELATIVE
5346 Adjust by program base.
5350 32 bit PC relative offset to GOT.
5356 BFD_RELOC_390_PC12DBL
5358 PC relative 12 bit shifted by 1.
5360 BFD_RELOC_390_PLT12DBL
5362 12 bit PC rel. PLT shifted by 1.
5364 BFD_RELOC_390_PC16DBL
5366 PC relative 16 bit shifted by 1.
5368 BFD_RELOC_390_PLT16DBL
5370 16 bit PC rel. PLT shifted by 1.
5372 BFD_RELOC_390_PC24DBL
5374 PC relative 24 bit shifted by 1.
5376 BFD_RELOC_390_PLT24DBL
5378 24 bit PC rel. PLT shifted by 1.
5380 BFD_RELOC_390_PC32DBL
5382 PC relative 32 bit shifted by 1.
5384 BFD_RELOC_390_PLT32DBL
5386 32 bit PC rel. PLT shifted by 1.
5388 BFD_RELOC_390_GOTPCDBL
5390 32 bit PC rel. GOT shifted by 1.
5398 64 bit PC relative PLT address.
5400 BFD_RELOC_390_GOTENT
5402 32 bit rel. offset to GOT entry.
5404 BFD_RELOC_390_GOTOFF64
5406 64 bit offset to GOT.
5408 BFD_RELOC_390_GOTPLT12
5410 12-bit offset to symbol-entry within GOT, with PLT handling.
5412 BFD_RELOC_390_GOTPLT16
5414 16-bit offset to symbol-entry within GOT, with PLT handling.
5416 BFD_RELOC_390_GOTPLT32
5418 32-bit offset to symbol-entry within GOT, with PLT handling.
5420 BFD_RELOC_390_GOTPLT64
5422 64-bit offset to symbol-entry within GOT, with PLT handling.
5424 BFD_RELOC_390_GOTPLTENT
5426 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5428 BFD_RELOC_390_PLTOFF16
5430 16-bit rel. offset from the GOT to a PLT entry.
5432 BFD_RELOC_390_PLTOFF32
5434 32-bit rel. offset from the GOT to a PLT entry.
5436 BFD_RELOC_390_PLTOFF64
5438 64-bit rel. offset from the GOT to a PLT entry.
5441 BFD_RELOC_390_TLS_LOAD
5443 BFD_RELOC_390_TLS_GDCALL
5445 BFD_RELOC_390_TLS_LDCALL
5447 BFD_RELOC_390_TLS_GD32
5449 BFD_RELOC_390_TLS_GD64
5451 BFD_RELOC_390_TLS_GOTIE12
5453 BFD_RELOC_390_TLS_GOTIE32
5455 BFD_RELOC_390_TLS_GOTIE64
5457 BFD_RELOC_390_TLS_LDM32
5459 BFD_RELOC_390_TLS_LDM64
5461 BFD_RELOC_390_TLS_IE32
5463 BFD_RELOC_390_TLS_IE64
5465 BFD_RELOC_390_TLS_IEENT
5467 BFD_RELOC_390_TLS_LE32
5469 BFD_RELOC_390_TLS_LE64
5471 BFD_RELOC_390_TLS_LDO32
5473 BFD_RELOC_390_TLS_LDO64
5475 BFD_RELOC_390_TLS_DTPMOD
5477 BFD_RELOC_390_TLS_DTPOFF
5479 BFD_RELOC_390_TLS_TPOFF
5481 s390 tls relocations.
5488 BFD_RELOC_390_GOTPLT20
5490 BFD_RELOC_390_TLS_GOTIE20
5492 Long displacement extension.
5495 BFD_RELOC_390_IRELATIVE
5497 STT_GNU_IFUNC relocation.
5500 BFD_RELOC_SCORE_GPREL15
5503 Low 16 bit for load/store
5505 BFD_RELOC_SCORE_DUMMY2
5509 This is a 24-bit reloc with the right 1 bit assumed to be 0
5511 BFD_RELOC_SCORE_BRANCH
5513 This is a 19-bit reloc with the right 1 bit assumed to be 0
5515 BFD_RELOC_SCORE_IMM30
5517 This is a 32-bit reloc for 48-bit instructions.
5519 BFD_RELOC_SCORE_IMM32
5521 This is a 32-bit reloc for 48-bit instructions.
5523 BFD_RELOC_SCORE16_JMP
5525 This is a 11-bit reloc with the right 1 bit assumed to be 0
5527 BFD_RELOC_SCORE16_BRANCH
5529 This is a 8-bit reloc with the right 1 bit assumed to be 0
5531 BFD_RELOC_SCORE_BCMP
5533 This is a 9-bit reloc with the right 1 bit assumed to be 0
5535 BFD_RELOC_SCORE_GOT15
5537 BFD_RELOC_SCORE_GOT_LO16
5539 BFD_RELOC_SCORE_CALL15
5541 BFD_RELOC_SCORE_DUMMY_HI16
5543 Undocumented Score relocs
5548 Scenix IP2K - 9-bit register number / data address
5552 Scenix IP2K - 4-bit register/data bank number
5554 BFD_RELOC_IP2K_ADDR16CJP
5556 Scenix IP2K - low 13 bits of instruction word address
5558 BFD_RELOC_IP2K_PAGE3
5560 Scenix IP2K - high 3 bits of instruction word address
5562 BFD_RELOC_IP2K_LO8DATA
5564 BFD_RELOC_IP2K_HI8DATA
5566 BFD_RELOC_IP2K_EX8DATA
5568 Scenix IP2K - ext/low/high 8 bits of data address
5570 BFD_RELOC_IP2K_LO8INSN
5572 BFD_RELOC_IP2K_HI8INSN
5574 Scenix IP2K - low/high 8 bits of instruction word address
5576 BFD_RELOC_IP2K_PC_SKIP
5578 Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5582 Scenix IP2K - 16 bit word address in text section.
5584 BFD_RELOC_IP2K_FR_OFFSET
5586 Scenix IP2K - 7-bit sp or dp offset
5588 BFD_RELOC_VPE4KMATH_DATA
5590 BFD_RELOC_VPE4KMATH_INSN
5592 Scenix VPE4K coprocessor - data/insn-space addressing
5595 BFD_RELOC_VTABLE_INHERIT
5597 BFD_RELOC_VTABLE_ENTRY
5599 These two relocations are used by the linker to determine which of
5600 the entries in a C++ virtual function table are actually used. When
5601 the --gc-sections option is given, the linker will zero out the entries
5602 that are not used, so that the code for those functions need not be
5603 included in the output.
5605 VTABLE_INHERIT is a zero-space relocation used to describe to the
5606 linker the inheritance tree of a C++ virtual function table. The
5607 relocation's symbol should be the parent class' vtable, and the
5608 relocation should be located at the child vtable.
5610 VTABLE_ENTRY is a zero-space relocation that describes the use of a
5611 virtual function table entry. The reloc's symbol should refer to the
5612 table of the class mentioned in the code. Off of that base, an offset
5613 describes the entry that is being used. For Rela hosts, this offset
5614 is stored in the reloc's addend. For Rel hosts, we are forced to put
5615 this offset in the reloc's section offset.
5618 BFD_RELOC_IA64_IMM14
5620 BFD_RELOC_IA64_IMM22
5622 BFD_RELOC_IA64_IMM64
5624 BFD_RELOC_IA64_DIR32MSB
5626 BFD_RELOC_IA64_DIR32LSB
5628 BFD_RELOC_IA64_DIR64MSB
5630 BFD_RELOC_IA64_DIR64LSB
5632 BFD_RELOC_IA64_GPREL22
5634 BFD_RELOC_IA64_GPREL64I
5636 BFD_RELOC_IA64_GPREL32MSB
5638 BFD_RELOC_IA64_GPREL32LSB
5640 BFD_RELOC_IA64_GPREL64MSB
5642 BFD_RELOC_IA64_GPREL64LSB
5644 BFD_RELOC_IA64_LTOFF22
5646 BFD_RELOC_IA64_LTOFF64I
5648 BFD_RELOC_IA64_PLTOFF22
5650 BFD_RELOC_IA64_PLTOFF64I
5652 BFD_RELOC_IA64_PLTOFF64MSB
5654 BFD_RELOC_IA64_PLTOFF64LSB
5656 BFD_RELOC_IA64_FPTR64I
5658 BFD_RELOC_IA64_FPTR32MSB
5660 BFD_RELOC_IA64_FPTR32LSB
5662 BFD_RELOC_IA64_FPTR64MSB
5664 BFD_RELOC_IA64_FPTR64LSB
5666 BFD_RELOC_IA64_PCREL21B
5668 BFD_RELOC_IA64_PCREL21BI
5670 BFD_RELOC_IA64_PCREL21M
5672 BFD_RELOC_IA64_PCREL21F
5674 BFD_RELOC_IA64_PCREL22
5676 BFD_RELOC_IA64_PCREL60B
5678 BFD_RELOC_IA64_PCREL64I
5680 BFD_RELOC_IA64_PCREL32MSB
5682 BFD_RELOC_IA64_PCREL32LSB
5684 BFD_RELOC_IA64_PCREL64MSB
5686 BFD_RELOC_IA64_PCREL64LSB
5688 BFD_RELOC_IA64_LTOFF_FPTR22
5690 BFD_RELOC_IA64_LTOFF_FPTR64I
5692 BFD_RELOC_IA64_LTOFF_FPTR32MSB
5694 BFD_RELOC_IA64_LTOFF_FPTR32LSB
5696 BFD_RELOC_IA64_LTOFF_FPTR64MSB
5698 BFD_RELOC_IA64_LTOFF_FPTR64LSB
5700 BFD_RELOC_IA64_SEGREL32MSB
5702 BFD_RELOC_IA64_SEGREL32LSB
5704 BFD_RELOC_IA64_SEGREL64MSB
5706 BFD_RELOC_IA64_SEGREL64LSB
5708 BFD_RELOC_IA64_SECREL32MSB
5710 BFD_RELOC_IA64_SECREL32LSB
5712 BFD_RELOC_IA64_SECREL64MSB
5714 BFD_RELOC_IA64_SECREL64LSB
5716 BFD_RELOC_IA64_REL32MSB
5718 BFD_RELOC_IA64_REL32LSB
5720 BFD_RELOC_IA64_REL64MSB
5722 BFD_RELOC_IA64_REL64LSB
5724 BFD_RELOC_IA64_LTV32MSB
5726 BFD_RELOC_IA64_LTV32LSB
5728 BFD_RELOC_IA64_LTV64MSB
5730 BFD_RELOC_IA64_LTV64LSB
5732 BFD_RELOC_IA64_IPLTMSB
5734 BFD_RELOC_IA64_IPLTLSB
5738 BFD_RELOC_IA64_LTOFF22X
5740 BFD_RELOC_IA64_LDXMOV
5742 BFD_RELOC_IA64_TPREL14
5744 BFD_RELOC_IA64_TPREL22
5746 BFD_RELOC_IA64_TPREL64I
5748 BFD_RELOC_IA64_TPREL64MSB
5750 BFD_RELOC_IA64_TPREL64LSB
5752 BFD_RELOC_IA64_LTOFF_TPREL22
5754 BFD_RELOC_IA64_DTPMOD64MSB
5756 BFD_RELOC_IA64_DTPMOD64LSB
5758 BFD_RELOC_IA64_LTOFF_DTPMOD22
5760 BFD_RELOC_IA64_DTPREL14
5762 BFD_RELOC_IA64_DTPREL22
5764 BFD_RELOC_IA64_DTPREL64I
5766 BFD_RELOC_IA64_DTPREL32MSB
5768 BFD_RELOC_IA64_DTPREL32LSB
5770 BFD_RELOC_IA64_DTPREL64MSB
5772 BFD_RELOC_IA64_DTPREL64LSB
5774 BFD_RELOC_IA64_LTOFF_DTPREL22
5776 Intel IA64 Relocations.
5779 BFD_RELOC_M68HC11_HI8
5781 Motorola 68HC11 reloc.
5782 This is the 8 bit high part of an absolute address.
5784 BFD_RELOC_M68HC11_LO8
5786 Motorola 68HC11 reloc.
5787 This is the 8 bit low part of an absolute address.
5789 BFD_RELOC_M68HC11_3B
5791 Motorola 68HC11 reloc.
5792 This is the 3 bit of a value.
5794 BFD_RELOC_M68HC11_RL_JUMP
5796 Motorola 68HC11 reloc.
5797 This reloc marks the beginning of a jump/call instruction.
5798 It is used for linker relaxation to correctly identify beginning
5799 of instruction and change some branches to use PC-relative
5802 BFD_RELOC_M68HC11_RL_GROUP
5804 Motorola 68HC11 reloc.
5805 This reloc marks a group of several instructions that gcc generates
5806 and for which the linker relaxation pass can modify and/or remove
5809 BFD_RELOC_M68HC11_LO16
5811 Motorola 68HC11 reloc.
5812 This is the 16-bit lower part of an address. It is used for 'call'
5813 instruction to specify the symbol address without any special
5814 transformation (due to memory bank window).
5816 BFD_RELOC_M68HC11_PAGE
5818 Motorola 68HC11 reloc.
5819 This is a 8-bit reloc that specifies the page number of an address.
5820 It is used by 'call' instruction to specify the page number of
5823 BFD_RELOC_M68HC11_24
5825 Motorola 68HC11 reloc.
5826 This is a 24-bit reloc that represents the address with a 16-bit
5827 value and a 8-bit page number. The symbol address is transformed
5828 to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5830 BFD_RELOC_M68HC12_5B
5832 Motorola 68HC12 reloc.
5833 This is the 5 bits of a value.
5835 BFD_RELOC_XGATE_RL_JUMP
5837 Freescale XGATE reloc.
5838 This reloc marks the beginning of a bra/jal instruction.
5840 BFD_RELOC_XGATE_RL_GROUP
5842 Freescale XGATE reloc.
5843 This reloc marks a group of several instructions that gcc generates
5844 and for which the linker relaxation pass can modify and/or remove
5847 BFD_RELOC_XGATE_LO16
5849 Freescale XGATE reloc.
5850 This is the 16-bit lower part of an address. It is used for the '16-bit'
5853 BFD_RELOC_XGATE_GPAGE
5855 Freescale XGATE reloc.
5859 Freescale XGATE reloc.
5861 BFD_RELOC_XGATE_PCREL_9
5863 Freescale XGATE reloc.
5864 This is a 9-bit pc-relative reloc.
5866 BFD_RELOC_XGATE_PCREL_10
5868 Freescale XGATE reloc.
5869 This is a 10-bit pc-relative reloc.
5871 BFD_RELOC_XGATE_IMM8_LO
5873 Freescale XGATE reloc.
5874 This is the 16-bit lower part of an address. It is used for the '16-bit'
5877 BFD_RELOC_XGATE_IMM8_HI
5879 Freescale XGATE reloc.
5880 This is the 16-bit higher part of an address. It is used for the '16-bit'
5883 BFD_RELOC_XGATE_IMM3
5885 Freescale XGATE reloc.
5886 This is a 3-bit pc-relative reloc.
5888 BFD_RELOC_XGATE_IMM4
5890 Freescale XGATE reloc.
5891 This is a 4-bit pc-relative reloc.
5893 BFD_RELOC_XGATE_IMM5
5895 Freescale XGATE reloc.
5896 This is a 5-bit pc-relative reloc.
5898 BFD_RELOC_M68HC12_9B
5900 Motorola 68HC12 reloc.
5901 This is the 9 bits of a value.
5903 BFD_RELOC_M68HC12_16B
5905 Motorola 68HC12 reloc.
5906 This is the 16 bits of a value.
5908 BFD_RELOC_M68HC12_9_PCREL
5910 Motorola 68HC12/XGATE reloc.
5911 This is a PCREL9 branch.
5913 BFD_RELOC_M68HC12_10_PCREL
5915 Motorola 68HC12/XGATE reloc.
5916 This is a PCREL10 branch.
5918 BFD_RELOC_M68HC12_LO8XG
5920 Motorola 68HC12/XGATE reloc.
5921 This is the 8 bit low part of an absolute address and immediately precedes
5922 a matching HI8XG part.
5924 BFD_RELOC_M68HC12_HI8XG
5926 Motorola 68HC12/XGATE reloc.
5927 This is the 8 bit high part of an absolute address and immediately follows
5928 a matching LO8XG part.
5930 BFD_RELOC_S12Z_15_PCREL
5932 Freescale S12Z reloc.
5933 This is a 15 bit relative address. If the most significant bits are all zero
5934 then it may be truncated to 8 bits.
5938 BFD_RELOC_16C_NUM08_C
5942 BFD_RELOC_16C_NUM16_C
5946 BFD_RELOC_16C_NUM32_C
5948 BFD_RELOC_16C_DISP04
5950 BFD_RELOC_16C_DISP04_C
5952 BFD_RELOC_16C_DISP08
5954 BFD_RELOC_16C_DISP08_C
5956 BFD_RELOC_16C_DISP16
5958 BFD_RELOC_16C_DISP16_C
5960 BFD_RELOC_16C_DISP24
5962 BFD_RELOC_16C_DISP24_C
5964 BFD_RELOC_16C_DISP24a
5966 BFD_RELOC_16C_DISP24a_C
5970 BFD_RELOC_16C_REG04_C
5972 BFD_RELOC_16C_REG04a
5974 BFD_RELOC_16C_REG04a_C
5978 BFD_RELOC_16C_REG14_C
5982 BFD_RELOC_16C_REG16_C
5986 BFD_RELOC_16C_REG20_C
5990 BFD_RELOC_16C_ABS20_C
5994 BFD_RELOC_16C_ABS24_C
5998 BFD_RELOC_16C_IMM04_C
6002 BFD_RELOC_16C_IMM16_C
6006 BFD_RELOC_16C_IMM20_C
6010 BFD_RELOC_16C_IMM24_C
6014 BFD_RELOC_16C_IMM32_C
6016 NS CR16C Relocations.
6021 BFD_RELOC_CR16_NUM16
6023 BFD_RELOC_CR16_NUM32
6025 BFD_RELOC_CR16_NUM32a
6027 BFD_RELOC_CR16_REGREL0
6029 BFD_RELOC_CR16_REGREL4
6031 BFD_RELOC_CR16_REGREL4a
6033 BFD_RELOC_CR16_REGREL14
6035 BFD_RELOC_CR16_REGREL14a
6037 BFD_RELOC_CR16_REGREL16
6039 BFD_RELOC_CR16_REGREL20
6041 BFD_RELOC_CR16_REGREL20a
6043 BFD_RELOC_CR16_ABS20
6045 BFD_RELOC_CR16_ABS24
6051 BFD_RELOC_CR16_IMM16
6053 BFD_RELOC_CR16_IMM20
6055 BFD_RELOC_CR16_IMM24
6057 BFD_RELOC_CR16_IMM32
6059 BFD_RELOC_CR16_IMM32a
6061 BFD_RELOC_CR16_DISP4
6063 BFD_RELOC_CR16_DISP8
6065 BFD_RELOC_CR16_DISP16
6067 BFD_RELOC_CR16_DISP20
6069 BFD_RELOC_CR16_DISP24
6071 BFD_RELOC_CR16_DISP24a
6073 BFD_RELOC_CR16_SWITCH8
6075 BFD_RELOC_CR16_SWITCH16
6077 BFD_RELOC_CR16_SWITCH32
6079 BFD_RELOC_CR16_GOT_REGREL20
6081 BFD_RELOC_CR16_GOTC_REGREL20
6083 BFD_RELOC_CR16_GLOB_DAT
6085 NS CR16 Relocations.
6092 BFD_RELOC_CRX_REL8_CMP
6100 BFD_RELOC_CRX_REGREL12
6102 BFD_RELOC_CRX_REGREL22
6104 BFD_RELOC_CRX_REGREL28
6106 BFD_RELOC_CRX_REGREL32
6122 BFD_RELOC_CRX_SWITCH8
6124 BFD_RELOC_CRX_SWITCH16
6126 BFD_RELOC_CRX_SWITCH32
6131 BFD_RELOC_CRIS_BDISP8
6133 BFD_RELOC_CRIS_UNSIGNED_5
6135 BFD_RELOC_CRIS_SIGNED_6
6137 BFD_RELOC_CRIS_UNSIGNED_6
6139 BFD_RELOC_CRIS_SIGNED_8
6141 BFD_RELOC_CRIS_UNSIGNED_8
6143 BFD_RELOC_CRIS_SIGNED_16
6145 BFD_RELOC_CRIS_UNSIGNED_16
6147 BFD_RELOC_CRIS_LAPCQ_OFFSET
6149 BFD_RELOC_CRIS_UNSIGNED_4
6151 These relocs are only used within the CRIS assembler. They are not
6152 (at present) written to any object files.
6156 BFD_RELOC_CRIS_GLOB_DAT
6158 BFD_RELOC_CRIS_JUMP_SLOT
6160 BFD_RELOC_CRIS_RELATIVE
6162 Relocs used in ELF shared libraries for CRIS.
6164 BFD_RELOC_CRIS_32_GOT
6166 32-bit offset to symbol-entry within GOT.
6168 BFD_RELOC_CRIS_16_GOT
6170 16-bit offset to symbol-entry within GOT.
6172 BFD_RELOC_CRIS_32_GOTPLT
6174 32-bit offset to symbol-entry within GOT, with PLT handling.
6176 BFD_RELOC_CRIS_16_GOTPLT
6178 16-bit offset to symbol-entry within GOT, with PLT handling.
6180 BFD_RELOC_CRIS_32_GOTREL
6182 32-bit offset to symbol, relative to GOT.
6184 BFD_RELOC_CRIS_32_PLT_GOTREL
6186 32-bit offset to symbol with PLT entry, relative to GOT.
6188 BFD_RELOC_CRIS_32_PLT_PCREL
6190 32-bit offset to symbol with PLT entry, relative to this relocation.
6193 BFD_RELOC_CRIS_32_GOT_GD
6195 BFD_RELOC_CRIS_16_GOT_GD
6197 BFD_RELOC_CRIS_32_GD
6201 BFD_RELOC_CRIS_32_DTPREL
6203 BFD_RELOC_CRIS_16_DTPREL
6205 BFD_RELOC_CRIS_32_GOT_TPREL
6207 BFD_RELOC_CRIS_16_GOT_TPREL
6209 BFD_RELOC_CRIS_32_TPREL
6211 BFD_RELOC_CRIS_16_TPREL
6213 BFD_RELOC_CRIS_DTPMOD
6215 BFD_RELOC_CRIS_32_IE
6217 Relocs used in TLS code for CRIS.
6220 BFD_RELOC_OR1K_REL_26
6222 BFD_RELOC_OR1K_SLO16
6224 BFD_RELOC_OR1K_PCREL_PG21
6228 BFD_RELOC_OR1K_SLO13
6230 BFD_RELOC_OR1K_GOTPC_HI16
6232 BFD_RELOC_OR1K_GOTPC_LO16
6234 BFD_RELOC_OR1K_GOT16
6236 BFD_RELOC_OR1K_GOT_PG21
6238 BFD_RELOC_OR1K_GOT_LO13
6240 BFD_RELOC_OR1K_PLT26
6242 BFD_RELOC_OR1K_PLTA26
6244 BFD_RELOC_OR1K_GOTOFF_SLO16
6248 BFD_RELOC_OR1K_GLOB_DAT
6250 BFD_RELOC_OR1K_JMP_SLOT
6252 BFD_RELOC_OR1K_RELATIVE
6254 BFD_RELOC_OR1K_TLS_GD_HI16
6256 BFD_RELOC_OR1K_TLS_GD_LO16
6258 BFD_RELOC_OR1K_TLS_GD_PG21
6260 BFD_RELOC_OR1K_TLS_GD_LO13
6262 BFD_RELOC_OR1K_TLS_LDM_HI16
6264 BFD_RELOC_OR1K_TLS_LDM_LO16
6266 BFD_RELOC_OR1K_TLS_LDM_PG21
6268 BFD_RELOC_OR1K_TLS_LDM_LO13
6270 BFD_RELOC_OR1K_TLS_LDO_HI16
6272 BFD_RELOC_OR1K_TLS_LDO_LO16
6274 BFD_RELOC_OR1K_TLS_IE_HI16
6276 BFD_RELOC_OR1K_TLS_IE_AHI16
6278 BFD_RELOC_OR1K_TLS_IE_LO16
6280 BFD_RELOC_OR1K_TLS_IE_PG21
6282 BFD_RELOC_OR1K_TLS_IE_LO13
6284 BFD_RELOC_OR1K_TLS_LE_HI16
6286 BFD_RELOC_OR1K_TLS_LE_AHI16
6288 BFD_RELOC_OR1K_TLS_LE_LO16
6290 BFD_RELOC_OR1K_TLS_LE_SLO16
6292 BFD_RELOC_OR1K_TLS_TPOFF
6294 BFD_RELOC_OR1K_TLS_DTPOFF
6296 BFD_RELOC_OR1K_TLS_DTPMOD
6298 OpenRISC 1000 Relocations.
6301 BFD_RELOC_H8_DIR16A8
6303 BFD_RELOC_H8_DIR16R8
6305 BFD_RELOC_H8_DIR24A8
6307 BFD_RELOC_H8_DIR24R8
6309 BFD_RELOC_H8_DIR32A16
6311 BFD_RELOC_H8_DISP32A16
6316 BFD_RELOC_XSTORMY16_REL_12
6318 BFD_RELOC_XSTORMY16_12
6320 BFD_RELOC_XSTORMY16_24
6322 BFD_RELOC_XSTORMY16_FPTR16
6324 Sony Xstormy16 Relocations.
6329 Self-describing complex relocations.
6341 Infineon Relocations.
6344 BFD_RELOC_VAX_GLOB_DAT
6346 BFD_RELOC_VAX_JMP_SLOT
6348 BFD_RELOC_VAX_RELATIVE
6350 Relocations used by VAX ELF.
6355 Morpho MT - 16 bit immediate relocation.
6359 Morpho MT - Hi 16 bits of an address.
6363 Morpho MT - Low 16 bits of an address.
6365 BFD_RELOC_MT_GNU_VTINHERIT
6367 Morpho MT - Used to tell the linker which vtable entries are used.
6369 BFD_RELOC_MT_GNU_VTENTRY
6371 Morpho MT - Used to tell the linker which vtable entries are used.
6373 BFD_RELOC_MT_PCINSN8
6375 Morpho MT - 8 bit immediate relocation.
6378 BFD_RELOC_MSP430_10_PCREL
6380 BFD_RELOC_MSP430_16_PCREL
6384 BFD_RELOC_MSP430_16_PCREL_BYTE
6386 BFD_RELOC_MSP430_16_BYTE
6388 BFD_RELOC_MSP430_2X_PCREL
6390 BFD_RELOC_MSP430_RL_PCREL
6392 BFD_RELOC_MSP430_ABS8
6394 BFD_RELOC_MSP430X_PCR20_EXT_SRC
6396 BFD_RELOC_MSP430X_PCR20_EXT_DST
6398 BFD_RELOC_MSP430X_PCR20_EXT_ODST
6400 BFD_RELOC_MSP430X_ABS20_EXT_SRC
6402 BFD_RELOC_MSP430X_ABS20_EXT_DST
6404 BFD_RELOC_MSP430X_ABS20_EXT_ODST
6406 BFD_RELOC_MSP430X_ABS20_ADR_SRC
6408 BFD_RELOC_MSP430X_ABS20_ADR_DST
6410 BFD_RELOC_MSP430X_PCR16
6412 BFD_RELOC_MSP430X_PCR20_CALL
6414 BFD_RELOC_MSP430X_ABS16
6416 BFD_RELOC_MSP430_ABS_HI16
6418 BFD_RELOC_MSP430_PREL31
6420 BFD_RELOC_MSP430_SYM_DIFF
6422 msp430 specific relocation codes
6429 BFD_RELOC_NIOS2_CALL26
6431 BFD_RELOC_NIOS2_IMM5
6433 BFD_RELOC_NIOS2_CACHE_OPX
6435 BFD_RELOC_NIOS2_IMM6
6437 BFD_RELOC_NIOS2_IMM8
6439 BFD_RELOC_NIOS2_HI16
6441 BFD_RELOC_NIOS2_LO16
6443 BFD_RELOC_NIOS2_HIADJ16
6445 BFD_RELOC_NIOS2_GPREL
6447 BFD_RELOC_NIOS2_UJMP
6449 BFD_RELOC_NIOS2_CJMP
6451 BFD_RELOC_NIOS2_CALLR
6453 BFD_RELOC_NIOS2_ALIGN
6455 BFD_RELOC_NIOS2_GOT16
6457 BFD_RELOC_NIOS2_CALL16
6459 BFD_RELOC_NIOS2_GOTOFF_LO
6461 BFD_RELOC_NIOS2_GOTOFF_HA
6463 BFD_RELOC_NIOS2_PCREL_LO
6465 BFD_RELOC_NIOS2_PCREL_HA
6467 BFD_RELOC_NIOS2_TLS_GD16
6469 BFD_RELOC_NIOS2_TLS_LDM16
6471 BFD_RELOC_NIOS2_TLS_LDO16
6473 BFD_RELOC_NIOS2_TLS_IE16
6475 BFD_RELOC_NIOS2_TLS_LE16
6477 BFD_RELOC_NIOS2_TLS_DTPMOD
6479 BFD_RELOC_NIOS2_TLS_DTPREL
6481 BFD_RELOC_NIOS2_TLS_TPREL
6483 BFD_RELOC_NIOS2_COPY
6485 BFD_RELOC_NIOS2_GLOB_DAT
6487 BFD_RELOC_NIOS2_JUMP_SLOT
6489 BFD_RELOC_NIOS2_RELATIVE
6491 BFD_RELOC_NIOS2_GOTOFF
6493 BFD_RELOC_NIOS2_CALL26_NOAT
6495 BFD_RELOC_NIOS2_GOT_LO
6497 BFD_RELOC_NIOS2_GOT_HA
6499 BFD_RELOC_NIOS2_CALL_LO
6501 BFD_RELOC_NIOS2_CALL_HA
6503 BFD_RELOC_NIOS2_R2_S12
6505 BFD_RELOC_NIOS2_R2_I10_1_PCREL
6507 BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6509 BFD_RELOC_NIOS2_R2_T1I7_2
6511 BFD_RELOC_NIOS2_R2_T2I4
6513 BFD_RELOC_NIOS2_R2_T2I4_1
6515 BFD_RELOC_NIOS2_R2_T2I4_2
6517 BFD_RELOC_NIOS2_R2_X1I7_2
6519 BFD_RELOC_NIOS2_R2_X2L5
6521 BFD_RELOC_NIOS2_R2_F1I5_2
6523 BFD_RELOC_NIOS2_R2_L5I4X1
6525 BFD_RELOC_NIOS2_R2_T1X1I6
6527 BFD_RELOC_NIOS2_R2_T1X1I6_2
6529 Relocations used by the Altera Nios II core.
6534 PRU LDI 16-bit unsigned data-memory relocation.
6536 BFD_RELOC_PRU_U16_PMEMIMM
6538 PRU LDI 16-bit unsigned instruction-memory relocation.
6542 PRU relocation for two consecutive LDI load instructions that load a
6543 32 bit value into a register. If the higher bits are all zero, then
6544 the second instruction may be relaxed.
6546 BFD_RELOC_PRU_S10_PCREL
6548 PRU QBBx 10-bit signed PC-relative relocation.
6550 BFD_RELOC_PRU_U8_PCREL
6552 PRU 8-bit unsigned relocation used for the LOOP instruction.
6554 BFD_RELOC_PRU_32_PMEM
6556 BFD_RELOC_PRU_16_PMEM
6558 PRU Program Memory relocations. Used to convert from byte addressing to
6559 32-bit word addressing.
6561 BFD_RELOC_PRU_GNU_DIFF8
6563 BFD_RELOC_PRU_GNU_DIFF16
6565 BFD_RELOC_PRU_GNU_DIFF32
6567 BFD_RELOC_PRU_GNU_DIFF16_PMEM
6569 BFD_RELOC_PRU_GNU_DIFF32_PMEM
6571 PRU relocations to mark the difference of two local symbols.
6572 These are only needed to support linker relaxation and can be ignored
6573 when not relaxing. The field is set to the value of the difference
6574 assuming no relaxation. The relocation encodes the position of the
6575 second symbol so the linker can determine whether to adjust the field
6576 value. The PMEM variants encode the word difference, instead of byte
6577 difference between symbols.
6580 BFD_RELOC_IQ2000_OFFSET_16
6582 BFD_RELOC_IQ2000_OFFSET_21
6584 BFD_RELOC_IQ2000_UHI16
6589 BFD_RELOC_XTENSA_RTLD
6591 Special Xtensa relocation used only by PLT entries in ELF shared
6592 objects to indicate that the runtime linker should set the value
6593 to one of its own internal functions or data structures.
6595 BFD_RELOC_XTENSA_GLOB_DAT
6597 BFD_RELOC_XTENSA_JMP_SLOT
6599 BFD_RELOC_XTENSA_RELATIVE
6601 Xtensa relocations for ELF shared objects.
6603 BFD_RELOC_XTENSA_PLT
6605 Xtensa relocation used in ELF object files for symbols that may require
6606 PLT entries. Otherwise, this is just a generic 32-bit relocation.
6608 BFD_RELOC_XTENSA_DIFF8
6610 BFD_RELOC_XTENSA_DIFF16
6612 BFD_RELOC_XTENSA_DIFF32
6614 Xtensa relocations to mark the difference of two local symbols.
6615 These are only needed to support linker relaxation and can be ignored
6616 when not relaxing. The field is set to the value of the difference
6617 assuming no relaxation. The relocation encodes the position of the
6618 first symbol so the linker can determine whether to adjust the field
6621 BFD_RELOC_XTENSA_SLOT0_OP
6623 BFD_RELOC_XTENSA_SLOT1_OP
6625 BFD_RELOC_XTENSA_SLOT2_OP
6627 BFD_RELOC_XTENSA_SLOT3_OP
6629 BFD_RELOC_XTENSA_SLOT4_OP
6631 BFD_RELOC_XTENSA_SLOT5_OP
6633 BFD_RELOC_XTENSA_SLOT6_OP
6635 BFD_RELOC_XTENSA_SLOT7_OP
6637 BFD_RELOC_XTENSA_SLOT8_OP
6639 BFD_RELOC_XTENSA_SLOT9_OP
6641 BFD_RELOC_XTENSA_SLOT10_OP
6643 BFD_RELOC_XTENSA_SLOT11_OP
6645 BFD_RELOC_XTENSA_SLOT12_OP
6647 BFD_RELOC_XTENSA_SLOT13_OP
6649 BFD_RELOC_XTENSA_SLOT14_OP
6651 Generic Xtensa relocations for instruction operands. Only the slot
6652 number is encoded in the relocation. The relocation applies to the
6653 last PC-relative immediate operand, or if there are no PC-relative
6654 immediates, to the last immediate operand.
6656 BFD_RELOC_XTENSA_SLOT0_ALT
6658 BFD_RELOC_XTENSA_SLOT1_ALT
6660 BFD_RELOC_XTENSA_SLOT2_ALT
6662 BFD_RELOC_XTENSA_SLOT3_ALT
6664 BFD_RELOC_XTENSA_SLOT4_ALT
6666 BFD_RELOC_XTENSA_SLOT5_ALT
6668 BFD_RELOC_XTENSA_SLOT6_ALT
6670 BFD_RELOC_XTENSA_SLOT7_ALT
6672 BFD_RELOC_XTENSA_SLOT8_ALT
6674 BFD_RELOC_XTENSA_SLOT9_ALT
6676 BFD_RELOC_XTENSA_SLOT10_ALT
6678 BFD_RELOC_XTENSA_SLOT11_ALT
6680 BFD_RELOC_XTENSA_SLOT12_ALT
6682 BFD_RELOC_XTENSA_SLOT13_ALT
6684 BFD_RELOC_XTENSA_SLOT14_ALT
6686 Alternate Xtensa relocations. Only the slot is encoded in the
6687 relocation. The meaning of these relocations is opcode-specific.
6689 BFD_RELOC_XTENSA_OP0
6691 BFD_RELOC_XTENSA_OP1
6693 BFD_RELOC_XTENSA_OP2
6695 Xtensa relocations for backward compatibility. These have all been
6696 replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6698 BFD_RELOC_XTENSA_ASM_EXPAND
6700 Xtensa relocation to mark that the assembler expanded the
6701 instructions from an original target. The expansion size is
6702 encoded in the reloc size.
6704 BFD_RELOC_XTENSA_ASM_SIMPLIFY
6706 Xtensa relocation to mark that the linker should simplify
6707 assembler-expanded instructions. This is commonly used
6708 internally by the linker after analysis of a
6709 BFD_RELOC_XTENSA_ASM_EXPAND.
6711 BFD_RELOC_XTENSA_TLSDESC_FN
6713 BFD_RELOC_XTENSA_TLSDESC_ARG
6715 BFD_RELOC_XTENSA_TLS_DTPOFF
6717 BFD_RELOC_XTENSA_TLS_TPOFF
6719 BFD_RELOC_XTENSA_TLS_FUNC
6721 BFD_RELOC_XTENSA_TLS_ARG
6723 BFD_RELOC_XTENSA_TLS_CALL
6725 Xtensa TLS relocations.
6730 8 bit signed offset in (ix+d) or (iy+d).
6748 BFD_RELOC_LM32_BRANCH
6750 BFD_RELOC_LM32_16_GOT
6752 BFD_RELOC_LM32_GOTOFF_HI16
6754 BFD_RELOC_LM32_GOTOFF_LO16
6758 BFD_RELOC_LM32_GLOB_DAT
6760 BFD_RELOC_LM32_JMP_SLOT
6762 BFD_RELOC_LM32_RELATIVE
6764 Lattice Mico32 relocations.
6767 BFD_RELOC_MACH_O_SECTDIFF
6769 Difference between two section addreses. Must be followed by a
6770 BFD_RELOC_MACH_O_PAIR.
6772 BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6774 Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6776 BFD_RELOC_MACH_O_PAIR
6778 Pair of relocation. Contains the first symbol.
6780 BFD_RELOC_MACH_O_SUBTRACTOR32
6782 Symbol will be substracted. Must be followed by a BFD_RELOC_32.
6784 BFD_RELOC_MACH_O_SUBTRACTOR64
6786 Symbol will be substracted. Must be followed by a BFD_RELOC_64.
6789 BFD_RELOC_MACH_O_X86_64_BRANCH32
6791 BFD_RELOC_MACH_O_X86_64_BRANCH8
6793 PCREL relocations. They are marked as branch to create PLT entry if
6796 BFD_RELOC_MACH_O_X86_64_GOT
6798 Used when referencing a GOT entry.
6800 BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6802 Used when loading a GOT entry with movq. It is specially marked so that
6803 the linker could optimize the movq to a leaq if possible.
6805 BFD_RELOC_MACH_O_X86_64_PCREL32_1
6807 Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6809 BFD_RELOC_MACH_O_X86_64_PCREL32_2
6811 Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6813 BFD_RELOC_MACH_O_X86_64_PCREL32_4
6815 Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6817 BFD_RELOC_MACH_O_X86_64_TLV
6819 Used when referencing a TLV entry.
6823 BFD_RELOC_MACH_O_ARM64_ADDEND
6825 Addend for PAGE or PAGEOFF.
6827 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6829 Relative offset to page of GOT slot.
6831 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6833 Relative offset within page of GOT slot.
6835 BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6837 Address of a GOT entry.
6840 BFD_RELOC_MICROBLAZE_32_LO
6842 This is a 32 bit reloc for the microblaze that stores the
6843 low 16 bits of a value
6845 BFD_RELOC_MICROBLAZE_32_LO_PCREL
6847 This is a 32 bit pc-relative reloc for the microblaze that
6848 stores the low 16 bits of a value
6850 BFD_RELOC_MICROBLAZE_32_ROSDA
6852 This is a 32 bit reloc for the microblaze that stores a
6853 value relative to the read-only small data area anchor
6855 BFD_RELOC_MICROBLAZE_32_RWSDA
6857 This is a 32 bit reloc for the microblaze that stores a
6858 value relative to the read-write small data area anchor
6860 BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6862 This is a 32 bit reloc for the microblaze to handle
6863 expressions of the form "Symbol Op Symbol"
6865 BFD_RELOC_MICROBLAZE_64_NONE
6867 This is a 64 bit reloc that stores the 32 bit pc relative
6868 value in two words (with an imm instruction). No relocation is
6869 done here - only used for relaxing
6871 BFD_RELOC_MICROBLAZE_64_GOTPC
6873 This is a 64 bit reloc that stores the 32 bit pc relative
6874 value in two words (with an imm instruction). The relocation is
6875 PC-relative GOT offset
6877 BFD_RELOC_MICROBLAZE_64_GOT
6879 This is a 64 bit reloc that stores the 32 bit pc relative
6880 value in two words (with an imm instruction). The relocation is
6883 BFD_RELOC_MICROBLAZE_64_PLT
6885 This is a 64 bit reloc that stores the 32 bit pc relative
6886 value in two words (with an imm instruction). The relocation is
6887 PC-relative offset into PLT
6889 BFD_RELOC_MICROBLAZE_64_GOTOFF
6891 This is a 64 bit reloc that stores the 32 bit GOT relative
6892 value in two words (with an imm instruction). The relocation is
6893 relative offset from _GLOBAL_OFFSET_TABLE_
6895 BFD_RELOC_MICROBLAZE_32_GOTOFF
6897 This is a 32 bit reloc that stores the 32 bit GOT relative
6898 value in a word. The relocation is relative offset from
6899 _GLOBAL_OFFSET_TABLE_
6901 BFD_RELOC_MICROBLAZE_COPY
6903 This is used to tell the dynamic linker to copy the value out of
6904 the dynamic object into the runtime process image.
6906 BFD_RELOC_MICROBLAZE_64_TLS
6910 BFD_RELOC_MICROBLAZE_64_TLSGD
6912 This is a 64 bit reloc that stores the 32 bit GOT relative value
6913 of the GOT TLS GD info entry in two words (with an imm instruction). The
6914 relocation is GOT offset.
6916 BFD_RELOC_MICROBLAZE_64_TLSLD
6918 This is a 64 bit reloc that stores the 32 bit GOT relative value
6919 of the GOT TLS LD info entry in two words (with an imm instruction). The
6920 relocation is GOT offset.
6922 BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6924 This is a 32 bit reloc that stores the Module ID to GOT(n).
6926 BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6928 This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6930 BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6932 This is a 32 bit reloc for storing TLS offset to two words (uses imm
6935 BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6937 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6938 to two words (uses imm instruction).
6940 BFD_RELOC_MICROBLAZE_64_TLSTPREL
6942 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6943 to two words (uses imm instruction).
6945 BFD_RELOC_MICROBLAZE_64_TEXTPCREL
6947 This is a 64 bit reloc that stores the 32 bit pc relative
6948 value in two words (with an imm instruction). The relocation is
6949 PC-relative offset from start of TEXT.
6951 BFD_RELOC_MICROBLAZE_64_TEXTREL
6953 This is a 64 bit reloc that stores the 32 bit offset
6954 value in two words (with an imm instruction). The relocation is
6955 relative offset from start of TEXT.
6958 BFD_RELOC_AARCH64_RELOC_START
6960 AArch64 pseudo relocation code to mark the start of the AArch64
6961 relocation enumerators. N.B. the order of the enumerators is
6962 important as several tables in the AArch64 bfd backend are indexed
6963 by these enumerators; make sure they are all synced.
6965 BFD_RELOC_AARCH64_NULL
6967 Deprecated AArch64 null relocation code.
6969 BFD_RELOC_AARCH64_NONE
6971 AArch64 null relocation code.
6973 BFD_RELOC_AARCH64_64
6975 BFD_RELOC_AARCH64_32
6977 BFD_RELOC_AARCH64_16
6979 Basic absolute relocations of N bits. These are equivalent to
6980 BFD_RELOC_N and they were added to assist the indexing of the howto
6983 BFD_RELOC_AARCH64_64_PCREL
6985 BFD_RELOC_AARCH64_32_PCREL
6987 BFD_RELOC_AARCH64_16_PCREL
6989 PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL
6990 and they were added to assist the indexing of the howto table.
6992 BFD_RELOC_AARCH64_MOVW_G0
6994 AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6995 of an unsigned address/value.
6997 BFD_RELOC_AARCH64_MOVW_G0_NC
6999 AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
7000 an address/value. No overflow checking.
7002 BFD_RELOC_AARCH64_MOVW_G1
7004 AArch64 MOV[NZK] instruction with most significant bits 16 to 31
7005 of an unsigned address/value.
7007 BFD_RELOC_AARCH64_MOVW_G1_NC
7009 AArch64 MOV[NZK] instruction with less significant bits 16 to 31
7010 of an address/value. No overflow checking.
7012 BFD_RELOC_AARCH64_MOVW_G2
7014 AArch64 MOV[NZK] instruction with most significant bits 32 to 47
7015 of an unsigned address/value.
7017 BFD_RELOC_AARCH64_MOVW_G2_NC
7019 AArch64 MOV[NZK] instruction with less significant bits 32 to 47
7020 of an address/value. No overflow checking.
7022 BFD_RELOC_AARCH64_MOVW_G3
7024 AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
7025 of a signed or unsigned address/value.
7027 BFD_RELOC_AARCH64_MOVW_G0_S
7029 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7030 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7033 BFD_RELOC_AARCH64_MOVW_G1_S
7035 AArch64 MOV[NZ] instruction with most significant bits 16 to 31
7036 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7039 BFD_RELOC_AARCH64_MOVW_G2_S
7041 AArch64 MOV[NZ] instruction with most significant bits 32 to 47
7042 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7045 BFD_RELOC_AARCH64_MOVW_PREL_G0
7047 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7048 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7051 BFD_RELOC_AARCH64_MOVW_PREL_G0_NC
7053 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7054 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7057 BFD_RELOC_AARCH64_MOVW_PREL_G1
7059 AArch64 MOVK instruction with most significant bits 16 to 31
7062 BFD_RELOC_AARCH64_MOVW_PREL_G1_NC
7064 AArch64 MOVK instruction with most significant bits 16 to 31
7067 BFD_RELOC_AARCH64_MOVW_PREL_G2
7069 AArch64 MOVK instruction with most significant bits 32 to 47
7072 BFD_RELOC_AARCH64_MOVW_PREL_G2_NC
7074 AArch64 MOVK instruction with most significant bits 32 to 47
7077 BFD_RELOC_AARCH64_MOVW_PREL_G3
7079 AArch64 MOVK instruction with most significant bits 47 to 63
7082 BFD_RELOC_AARCH64_LD_LO19_PCREL
7084 AArch64 Load Literal instruction, holding a 19 bit pc-relative word
7085 offset. The lowest two bits must be zero and are not stored in the
7086 instruction, giving a 21 bit signed byte offset.
7088 BFD_RELOC_AARCH64_ADR_LO21_PCREL
7090 AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
7092 BFD_RELOC_AARCH64_ADR_HI21_PCREL
7094 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7095 offset, giving a 4KB aligned page base address.
7097 BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
7099 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7100 offset, giving a 4KB aligned page base address, but with no overflow
7103 BFD_RELOC_AARCH64_ADD_LO12
7105 AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
7106 Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7108 BFD_RELOC_AARCH64_LDST8_LO12
7110 AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
7111 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7113 BFD_RELOC_AARCH64_TSTBR14
7115 AArch64 14 bit pc-relative test bit and branch.
7116 The lowest two bits must be zero and are not stored in the instruction,
7117 giving a 16 bit signed byte offset.
7119 BFD_RELOC_AARCH64_BRANCH19
7121 AArch64 19 bit pc-relative conditional branch and compare & branch.
7122 The lowest two bits must be zero and are not stored in the instruction,
7123 giving a 21 bit signed byte offset.
7125 BFD_RELOC_AARCH64_JUMP26
7127 AArch64 26 bit pc-relative unconditional branch.
7128 The lowest two bits must be zero and are not stored in the instruction,
7129 giving a 28 bit signed byte offset.
7131 BFD_RELOC_AARCH64_CALL26
7133 AArch64 26 bit pc-relative unconditional branch and link.
7134 The lowest two bits must be zero and are not stored in the instruction,
7135 giving a 28 bit signed byte offset.
7137 BFD_RELOC_AARCH64_LDST16_LO12
7139 AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
7140 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7142 BFD_RELOC_AARCH64_LDST32_LO12
7144 AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
7145 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7147 BFD_RELOC_AARCH64_LDST64_LO12
7149 AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
7150 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7152 BFD_RELOC_AARCH64_LDST128_LO12
7154 AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
7155 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7157 BFD_RELOC_AARCH64_GOT_LD_PREL19
7159 AArch64 Load Literal instruction, holding a 19 bit PC relative word
7160 offset of the global offset table entry for a symbol. The lowest two
7161 bits must be zero and are not stored in the instruction, giving a 21
7162 bit signed byte offset. This relocation type requires signed overflow
7165 BFD_RELOC_AARCH64_ADR_GOT_PAGE
7167 Get to the page base of the global offset table entry for a symbol as
7168 part of an ADRP instruction using a 21 bit PC relative value.Used in
7169 conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
7171 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
7173 Unsigned 12 bit byte offset for 64 bit load/store from the page of
7174 the GOT entry for this symbol. Used in conjunction with
7175 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in LP64 ABI only.
7177 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
7179 Unsigned 12 bit byte offset for 32 bit load/store from the page of
7180 the GOT entry for this symbol. Used in conjunction with
7181 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in ILP32 ABI only.
7183 BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
7185 Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
7186 for this symbol. Valid in LP64 ABI only.
7188 BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
7190 Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
7191 for this symbol. Valid in LP64 ABI only.
7193 BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
7195 Unsigned 15 bit byte offset for 64 bit load/store from the page of
7196 the GOT entry for this symbol. Valid in LP64 ABI only.
7198 BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
7200 Scaled 14 bit byte offset to the page base of the global offset table.
7202 BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
7204 Scaled 15 bit byte offset to the page base of the global offset table.
7206 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
7208 Get to the page base of the global offset table entry for a symbols
7209 tls_index structure as part of an adrp instruction using a 21 bit PC
7210 relative value. Used in conjunction with
7211 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7213 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7215 AArch64 TLS General Dynamic
7217 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7219 Unsigned 12 bit byte offset to global offset table entry for a symbols
7220 tls_index structure. Used in conjunction with
7221 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7223 BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7225 AArch64 TLS General Dynamic relocation.
7227 BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7229 AArch64 TLS General Dynamic relocation.
7231 BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7233 AArch64 TLS INITIAL EXEC relocation.
7235 BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7237 AArch64 TLS INITIAL EXEC relocation.
7239 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7241 AArch64 TLS INITIAL EXEC relocation.
7243 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7245 AArch64 TLS INITIAL EXEC relocation.
7247 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7249 AArch64 TLS INITIAL EXEC relocation.
7251 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7253 AArch64 TLS INITIAL EXEC relocation.
7255 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7257 bit[23:12] of byte offset to module TLS base address.
7259 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7261 Unsigned 12 bit byte offset to module TLS base address.
7263 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7265 No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7267 BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7269 Unsigned 12 bit byte offset to global offset table entry for a symbols
7270 tls_index structure. Used in conjunction with
7271 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7273 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7275 GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7278 BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7280 GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7282 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7284 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7287 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7289 Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7291 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7293 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7296 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7298 Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7300 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7302 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7305 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7307 Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7309 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7311 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7314 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7316 Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7318 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7320 bit[15:0] of byte offset to module TLS base address.
7322 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7324 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7326 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7328 bit[31:16] of byte offset to module TLS base address.
7330 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7332 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7334 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7336 bit[47:32] of byte offset to module TLS base address.
7338 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7340 AArch64 TLS LOCAL EXEC relocation.
7342 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7344 AArch64 TLS LOCAL EXEC relocation.
7346 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7348 AArch64 TLS LOCAL EXEC relocation.
7350 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7352 AArch64 TLS LOCAL EXEC relocation.
7354 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7356 AArch64 TLS LOCAL EXEC relocation.
7358 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7360 AArch64 TLS LOCAL EXEC relocation.
7362 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7364 AArch64 TLS LOCAL EXEC relocation.
7366 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7368 AArch64 TLS LOCAL EXEC relocation.
7370 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12
7372 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7375 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC
7377 Similar as BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no overflow check.
7379 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12
7381 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7384 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC
7386 Similar as BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no overflow check.
7388 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12
7390 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7393 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC
7395 Similar as BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no overflow check.
7397 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12
7399 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7402 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC
7404 Similar as BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow check.
7406 BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7408 AArch64 TLS DESC relocation.
7410 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7412 AArch64 TLS DESC relocation.
7414 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7416 AArch64 TLS DESC relocation.
7418 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12
7420 AArch64 TLS DESC relocation.
7422 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7424 AArch64 TLS DESC relocation.
7426 BFD_RELOC_AARCH64_TLSDESC_ADD_LO12
7428 AArch64 TLS DESC relocation.
7430 BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7432 AArch64 TLS DESC relocation.
7434 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7436 AArch64 TLS DESC relocation.
7438 BFD_RELOC_AARCH64_TLSDESC_LDR
7440 AArch64 TLS DESC relocation.
7442 BFD_RELOC_AARCH64_TLSDESC_ADD
7444 AArch64 TLS DESC relocation.
7446 BFD_RELOC_AARCH64_TLSDESC_CALL
7448 AArch64 TLS DESC relocation.
7450 BFD_RELOC_AARCH64_COPY
7452 AArch64 TLS relocation.
7454 BFD_RELOC_AARCH64_GLOB_DAT
7456 AArch64 TLS relocation.
7458 BFD_RELOC_AARCH64_JUMP_SLOT
7460 AArch64 TLS relocation.
7462 BFD_RELOC_AARCH64_RELATIVE
7464 AArch64 TLS relocation.
7466 BFD_RELOC_AARCH64_TLS_DTPMOD
7468 AArch64 TLS relocation.
7470 BFD_RELOC_AARCH64_TLS_DTPREL
7472 AArch64 TLS relocation.
7474 BFD_RELOC_AARCH64_TLS_TPREL
7476 AArch64 TLS relocation.
7478 BFD_RELOC_AARCH64_TLSDESC
7480 AArch64 TLS relocation.
7482 BFD_RELOC_AARCH64_IRELATIVE
7484 AArch64 support for STT_GNU_IFUNC.
7486 BFD_RELOC_AARCH64_RELOC_END
7488 AArch64 pseudo relocation code to mark the end of the AArch64
7489 relocation enumerators that have direct mapping to ELF reloc codes.
7490 There are a few more enumerators after this one; those are mainly
7491 used by the AArch64 assembler for the internal fixup or to select
7492 one of the above enumerators.
7494 BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7496 AArch64 pseudo relocation code to be used internally by the AArch64
7497 assembler and not (currently) written to any object files.
7499 BFD_RELOC_AARCH64_LDST_LO12
7501 AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7502 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7504 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7506 AArch64 pseudo relocation code for TLS local dynamic mode. It's to be
7507 used internally by the AArch64 assembler and not (currently) written to
7510 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7512 Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7514 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12
7516 AArch64 pseudo relocation code for TLS local exec mode. It's to be
7517 used internally by the AArch64 assembler and not (currently) written to
7520 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC
7522 Similar as BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow check.
7524 BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7526 AArch64 pseudo relocation code to be used internally by the AArch64
7527 assembler and not (currently) written to any object files.
7529 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7531 AArch64 pseudo relocation code to be used internally by the AArch64
7532 assembler and not (currently) written to any object files.
7534 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7536 AArch64 pseudo relocation code to be used internally by the AArch64
7537 assembler and not (currently) written to any object files.
7539 BFD_RELOC_TILEPRO_COPY
7541 BFD_RELOC_TILEPRO_GLOB_DAT
7543 BFD_RELOC_TILEPRO_JMP_SLOT
7545 BFD_RELOC_TILEPRO_RELATIVE
7547 BFD_RELOC_TILEPRO_BROFF_X1
7549 BFD_RELOC_TILEPRO_JOFFLONG_X1
7551 BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7553 BFD_RELOC_TILEPRO_IMM8_X0
7555 BFD_RELOC_TILEPRO_IMM8_Y0
7557 BFD_RELOC_TILEPRO_IMM8_X1
7559 BFD_RELOC_TILEPRO_IMM8_Y1
7561 BFD_RELOC_TILEPRO_DEST_IMM8_X1
7563 BFD_RELOC_TILEPRO_MT_IMM15_X1
7565 BFD_RELOC_TILEPRO_MF_IMM15_X1
7567 BFD_RELOC_TILEPRO_IMM16_X0
7569 BFD_RELOC_TILEPRO_IMM16_X1
7571 BFD_RELOC_TILEPRO_IMM16_X0_LO
7573 BFD_RELOC_TILEPRO_IMM16_X1_LO
7575 BFD_RELOC_TILEPRO_IMM16_X0_HI
7577 BFD_RELOC_TILEPRO_IMM16_X1_HI
7579 BFD_RELOC_TILEPRO_IMM16_X0_HA
7581 BFD_RELOC_TILEPRO_IMM16_X1_HA
7583 BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7585 BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7587 BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7589 BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7591 BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7593 BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7595 BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7597 BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7599 BFD_RELOC_TILEPRO_IMM16_X0_GOT
7601 BFD_RELOC_TILEPRO_IMM16_X1_GOT
7603 BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7605 BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7607 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7609 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7611 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7613 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7615 BFD_RELOC_TILEPRO_MMSTART_X0
7617 BFD_RELOC_TILEPRO_MMEND_X0
7619 BFD_RELOC_TILEPRO_MMSTART_X1
7621 BFD_RELOC_TILEPRO_MMEND_X1
7623 BFD_RELOC_TILEPRO_SHAMT_X0
7625 BFD_RELOC_TILEPRO_SHAMT_X1
7627 BFD_RELOC_TILEPRO_SHAMT_Y0
7629 BFD_RELOC_TILEPRO_SHAMT_Y1
7631 BFD_RELOC_TILEPRO_TLS_GD_CALL
7633 BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7635 BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7637 BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7639 BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7641 BFD_RELOC_TILEPRO_TLS_IE_LOAD
7643 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7645 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7647 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7649 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7651 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7653 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7655 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7657 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7659 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7661 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7663 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7665 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7667 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7669 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7671 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7673 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7675 BFD_RELOC_TILEPRO_TLS_DTPMOD32
7677 BFD_RELOC_TILEPRO_TLS_DTPOFF32
7679 BFD_RELOC_TILEPRO_TLS_TPOFF32
7681 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7683 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7685 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7687 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7689 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7691 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7693 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7695 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7697 Tilera TILEPro Relocations.
7699 BFD_RELOC_TILEGX_HW0
7701 BFD_RELOC_TILEGX_HW1
7703 BFD_RELOC_TILEGX_HW2
7705 BFD_RELOC_TILEGX_HW3
7707 BFD_RELOC_TILEGX_HW0_LAST
7709 BFD_RELOC_TILEGX_HW1_LAST
7711 BFD_RELOC_TILEGX_HW2_LAST
7713 BFD_RELOC_TILEGX_COPY
7715 BFD_RELOC_TILEGX_GLOB_DAT
7717 BFD_RELOC_TILEGX_JMP_SLOT
7719 BFD_RELOC_TILEGX_RELATIVE
7721 BFD_RELOC_TILEGX_BROFF_X1
7723 BFD_RELOC_TILEGX_JUMPOFF_X1
7725 BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7727 BFD_RELOC_TILEGX_IMM8_X0
7729 BFD_RELOC_TILEGX_IMM8_Y0
7731 BFD_RELOC_TILEGX_IMM8_X1
7733 BFD_RELOC_TILEGX_IMM8_Y1
7735 BFD_RELOC_TILEGX_DEST_IMM8_X1
7737 BFD_RELOC_TILEGX_MT_IMM14_X1
7739 BFD_RELOC_TILEGX_MF_IMM14_X1
7741 BFD_RELOC_TILEGX_MMSTART_X0
7743 BFD_RELOC_TILEGX_MMEND_X0
7745 BFD_RELOC_TILEGX_SHAMT_X0
7747 BFD_RELOC_TILEGX_SHAMT_X1
7749 BFD_RELOC_TILEGX_SHAMT_Y0
7751 BFD_RELOC_TILEGX_SHAMT_Y1
7753 BFD_RELOC_TILEGX_IMM16_X0_HW0
7755 BFD_RELOC_TILEGX_IMM16_X1_HW0
7757 BFD_RELOC_TILEGX_IMM16_X0_HW1
7759 BFD_RELOC_TILEGX_IMM16_X1_HW1
7761 BFD_RELOC_TILEGX_IMM16_X0_HW2
7763 BFD_RELOC_TILEGX_IMM16_X1_HW2
7765 BFD_RELOC_TILEGX_IMM16_X0_HW3
7767 BFD_RELOC_TILEGX_IMM16_X1_HW3
7769 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7771 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7773 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7775 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7777 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7779 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7781 BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7783 BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7785 BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7787 BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7789 BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7791 BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7793 BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7795 BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7797 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7799 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7801 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7803 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7805 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7807 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7809 BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7811 BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7813 BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7815 BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7817 BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7819 BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7821 BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7823 BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7825 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7827 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7829 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7831 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7833 BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7835 BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7837 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7839 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7841 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7843 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7845 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7847 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7849 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7851 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7853 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7855 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7857 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7859 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7861 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7863 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7865 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7867 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7869 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7871 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7873 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7875 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7877 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7879 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7881 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7883 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7885 BFD_RELOC_TILEGX_TLS_DTPMOD64
7887 BFD_RELOC_TILEGX_TLS_DTPOFF64
7889 BFD_RELOC_TILEGX_TLS_TPOFF64
7891 BFD_RELOC_TILEGX_TLS_DTPMOD32
7893 BFD_RELOC_TILEGX_TLS_DTPOFF32
7895 BFD_RELOC_TILEGX_TLS_TPOFF32
7897 BFD_RELOC_TILEGX_TLS_GD_CALL
7899 BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7901 BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7903 BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7905 BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7907 BFD_RELOC_TILEGX_TLS_IE_LOAD
7909 BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7911 BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7913 BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7915 BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7917 Tilera TILE-Gx Relocations.
7926 BFD_RELOC_BPF_DISP16
7928 BFD_RELOC_BPF_DISP32
7930 Linux eBPF relocations.
7933 BFD_RELOC_EPIPHANY_SIMM8
7935 Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7937 BFD_RELOC_EPIPHANY_SIMM24
7939 Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7941 BFD_RELOC_EPIPHANY_HIGH
7943 Adapteva EPIPHANY - 16 most-significant bits of absolute address
7945 BFD_RELOC_EPIPHANY_LOW
7947 Adapteva EPIPHANY - 16 least-significant bits of absolute address
7949 BFD_RELOC_EPIPHANY_SIMM11
7951 Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7953 BFD_RELOC_EPIPHANY_IMM11
7955 Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7957 BFD_RELOC_EPIPHANY_IMM8
7959 Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7962 BFD_RELOC_VISIUM_HI16
7964 BFD_RELOC_VISIUM_LO16
7966 BFD_RELOC_VISIUM_IM16
7968 BFD_RELOC_VISIUM_REL16
7970 BFD_RELOC_VISIUM_HI16_PCREL
7972 BFD_RELOC_VISIUM_LO16_PCREL
7974 BFD_RELOC_VISIUM_IM16_PCREL
7979 BFD_RELOC_WASM32_LEB128
7981 BFD_RELOC_WASM32_LEB128_GOT
7983 BFD_RELOC_WASM32_LEB128_GOT_CODE
7985 BFD_RELOC_WASM32_LEB128_PLT
7987 BFD_RELOC_WASM32_PLT_INDEX
7989 BFD_RELOC_WASM32_ABS32_CODE
7991 BFD_RELOC_WASM32_COPY
7993 BFD_RELOC_WASM32_CODE_POINTER
7995 BFD_RELOC_WASM32_INDEX
7997 BFD_RELOC_WASM32_PLT_SIG
7999 WebAssembly relocations.
8002 BFD_RELOC_CKCORE_NONE
8004 BFD_RELOC_CKCORE_ADDR32
8006 BFD_RELOC_CKCORE_PCREL_IMM8BY4
8008 BFD_RELOC_CKCORE_PCREL_IMM11BY2
8010 BFD_RELOC_CKCORE_PCREL_IMM4BY2
8012 BFD_RELOC_CKCORE_PCREL32
8014 BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2
8016 BFD_RELOC_CKCORE_GNU_VTINHERIT
8018 BFD_RELOC_CKCORE_GNU_VTENTRY
8020 BFD_RELOC_CKCORE_RELATIVE
8022 BFD_RELOC_CKCORE_COPY
8024 BFD_RELOC_CKCORE_GLOB_DAT
8026 BFD_RELOC_CKCORE_JUMP_SLOT
8028 BFD_RELOC_CKCORE_GOTOFF
8030 BFD_RELOC_CKCORE_GOTPC
8032 BFD_RELOC_CKCORE_GOT32
8034 BFD_RELOC_CKCORE_PLT32
8036 BFD_RELOC_CKCORE_ADDRGOT
8038 BFD_RELOC_CKCORE_ADDRPLT
8040 BFD_RELOC_CKCORE_PCREL_IMM26BY2
8042 BFD_RELOC_CKCORE_PCREL_IMM16BY2
8044 BFD_RELOC_CKCORE_PCREL_IMM16BY4
8046 BFD_RELOC_CKCORE_PCREL_IMM10BY2
8048 BFD_RELOC_CKCORE_PCREL_IMM10BY4
8050 BFD_RELOC_CKCORE_ADDR_HI16
8052 BFD_RELOC_CKCORE_ADDR_LO16
8054 BFD_RELOC_CKCORE_GOTPC_HI16
8056 BFD_RELOC_CKCORE_GOTPC_LO16
8058 BFD_RELOC_CKCORE_GOTOFF_HI16
8060 BFD_RELOC_CKCORE_GOTOFF_LO16
8062 BFD_RELOC_CKCORE_GOT12
8064 BFD_RELOC_CKCORE_GOT_HI16
8066 BFD_RELOC_CKCORE_GOT_LO16
8068 BFD_RELOC_CKCORE_PLT12
8070 BFD_RELOC_CKCORE_PLT_HI16
8072 BFD_RELOC_CKCORE_PLT_LO16
8074 BFD_RELOC_CKCORE_ADDRGOT_HI16
8076 BFD_RELOC_CKCORE_ADDRGOT_LO16
8078 BFD_RELOC_CKCORE_ADDRPLT_HI16
8080 BFD_RELOC_CKCORE_ADDRPLT_LO16
8082 BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2
8084 BFD_RELOC_CKCORE_TOFFSET_LO16
8086 BFD_RELOC_CKCORE_DOFFSET_LO16
8088 BFD_RELOC_CKCORE_PCREL_IMM18BY2
8090 BFD_RELOC_CKCORE_DOFFSET_IMM18
8092 BFD_RELOC_CKCORE_DOFFSET_IMM18BY2
8094 BFD_RELOC_CKCORE_DOFFSET_IMM18BY4
8096 BFD_RELOC_CKCORE_GOTOFF_IMM18
8098 BFD_RELOC_CKCORE_GOT_IMM18BY4
8100 BFD_RELOC_CKCORE_PLT_IMM18BY4
8102 BFD_RELOC_CKCORE_PCREL_IMM7BY4
8104 BFD_RELOC_CKCORE_TLS_LE32
8106 BFD_RELOC_CKCORE_TLS_IE32
8108 BFD_RELOC_CKCORE_TLS_GD32
8110 BFD_RELOC_CKCORE_TLS_LDM32
8112 BFD_RELOC_CKCORE_TLS_LDO32
8114 BFD_RELOC_CKCORE_TLS_DTPMOD32
8116 BFD_RELOC_CKCORE_TLS_DTPOFF32
8118 BFD_RELOC_CKCORE_TLS_TPOFF32
8120 BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4
8122 BFD_RELOC_CKCORE_NOJSRI
8124 BFD_RELOC_CKCORE_CALLGRAPH
8126 BFD_RELOC_CKCORE_IRELATIVE
8128 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4
8130 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4
8143 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
8148 bfd_reloc_type_lookup
8149 bfd_reloc_name_lookup
8152 reloc_howto_type *bfd_reloc_type_lookup
8153 (bfd *abfd, bfd_reloc_code_real_type code);
8154 reloc_howto_type *bfd_reloc_name_lookup
8155 (bfd *abfd, const char *reloc_name);
8158 Return a pointer to a howto structure which, when
8159 invoked, will perform the relocation @var{code} on data from the
8165 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8167 return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
8171 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
8173 return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
8176 static reloc_howto_type bfd_howto_32 =
8177 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
8181 bfd_default_reloc_type_lookup
8184 reloc_howto_type *bfd_default_reloc_type_lookup
8185 (bfd *abfd, bfd_reloc_code_real_type code);
8188 Provides a default relocation lookup routine for any architecture.
8193 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8197 case BFD_RELOC_CTOR:
8198 /* The type of reloc used in a ctor, which will be as wide as the
8199 address - so either a 64, 32, or 16 bitter. */
8200 switch (bfd_arch_bits_per_address (abfd))
8206 return &bfd_howto_32;
8222 bfd_get_reloc_code_name
8225 const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
8228 Provides a printable name for the supplied relocation code.
8229 Useful mainly for printing error messages.
8233 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
8235 if (code > BFD_RELOC_UNUSED)
8237 return bfd_reloc_code_real_names[code];
8242 bfd_generic_relax_section
8245 bfd_boolean bfd_generic_relax_section
8248 struct bfd_link_info *,
8252 Provides default handling for relaxing for back ends which
8257 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
8258 asection *section ATTRIBUTE_UNUSED,
8259 struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
8262 if (bfd_link_relocatable (link_info))
8263 (*link_info->callbacks->einfo)
8264 (_("%P%F: --relax and -r may not be used together\n"));
8272 bfd_generic_gc_sections
8275 bfd_boolean bfd_generic_gc_sections
8276 (bfd *, struct bfd_link_info *);
8279 Provides default handling for relaxing for back ends which
8280 don't do section gc -- i.e., does nothing.
8284 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
8285 struct bfd_link_info *info ATTRIBUTE_UNUSED)
8292 bfd_generic_lookup_section_flags
8295 bfd_boolean bfd_generic_lookup_section_flags
8296 (struct bfd_link_info *, struct flag_info *, asection *);
8299 Provides default handling for section flags lookup
8300 -- i.e., does nothing.
8301 Returns FALSE if the section should be omitted, otherwise TRUE.
8305 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
8306 struct flag_info *flaginfo,
8307 asection *section ATTRIBUTE_UNUSED)
8309 if (flaginfo != NULL)
8311 _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported"));
8319 bfd_generic_merge_sections
8322 bfd_boolean bfd_generic_merge_sections
8323 (bfd *, struct bfd_link_info *);
8326 Provides default handling for SEC_MERGE section merging for back ends
8327 which don't have SEC_MERGE support -- i.e., does nothing.
8331 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
8332 struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
8339 bfd_generic_get_relocated_section_contents
8342 bfd_byte *bfd_generic_get_relocated_section_contents
8344 struct bfd_link_info *link_info,
8345 struct bfd_link_order *link_order,
8347 bfd_boolean relocatable,
8351 Provides default handling of relocation effort for back ends
8352 which can't be bothered to do it efficiently.
8357 bfd_generic_get_relocated_section_contents (bfd *abfd,
8358 struct bfd_link_info *link_info,
8359 struct bfd_link_order *link_order,
8361 bfd_boolean relocatable,
8364 bfd *input_bfd = link_order->u.indirect.section->owner;
8365 asection *input_section = link_order->u.indirect.section;
8367 arelent **reloc_vector;
8370 reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
8374 /* Read in the section. */
8375 if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
8381 if (reloc_size == 0)
8384 reloc_vector = (arelent **) bfd_malloc (reloc_size);
8385 if (reloc_vector == NULL)
8388 reloc_count = bfd_canonicalize_reloc (input_bfd,
8392 if (reloc_count < 0)
8395 if (reloc_count > 0)
8399 for (parent = reloc_vector; *parent != NULL; parent++)
8401 char *error_message = NULL;
8403 bfd_reloc_status_type r;
8405 symbol = *(*parent)->sym_ptr_ptr;
8406 /* PR ld/19628: A specially crafted input file
8407 can result in a NULL symbol pointer here. */
8410 link_info->callbacks->einfo
8411 /* xgettext:c-format */
8412 (_("%X%P: %pB(%pA): error: relocation for offset %V has no value\n"),
8413 abfd, input_section, (* parent)->address);
8417 /* Zap reloc field when the symbol is from a discarded
8418 section, ignoring any addend. Do the same when called
8419 from bfd_simple_get_relocated_section_contents for
8420 undefined symbols in debug sections. This is to keep
8421 debug info reasonably sane, in particular so that
8422 DW_FORM_ref_addr to another file's .debug_info isn't
8423 confused with an offset into the current file's
8425 if ((symbol->section != NULL && discarded_section (symbol->section))
8426 || (symbol->section == bfd_und_section_ptr
8427 && (input_section->flags & SEC_DEBUGGING) != 0
8428 && link_info->input_bfds == link_info->output_bfd))
8431 static reloc_howto_type none_howto
8432 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
8433 "unused", FALSE, 0, 0, FALSE);
8435 off = (*parent)->address * bfd_octets_per_byte (input_bfd);
8436 _bfd_clear_contents ((*parent)->howto, input_bfd,
8437 input_section, data, off);
8438 (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
8439 (*parent)->addend = 0;
8440 (*parent)->howto = &none_howto;
8444 r = bfd_perform_relocation (input_bfd,
8448 relocatable ? abfd : NULL,
8453 asection *os = input_section->output_section;
8455 /* A partial link, so keep the relocs. */
8456 os->orelocation[os->reloc_count] = *parent;
8460 if (r != bfd_reloc_ok)
8464 case bfd_reloc_undefined:
8465 (*link_info->callbacks->undefined_symbol)
8466 (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8467 input_bfd, input_section, (*parent)->address, TRUE);
8469 case bfd_reloc_dangerous:
8470 BFD_ASSERT (error_message != NULL);
8471 (*link_info->callbacks->reloc_dangerous)
8472 (link_info, error_message,
8473 input_bfd, input_section, (*parent)->address);
8475 case bfd_reloc_overflow:
8476 (*link_info->callbacks->reloc_overflow)
8478 bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8479 (*parent)->howto->name, (*parent)->addend,
8480 input_bfd, input_section, (*parent)->address);
8482 case bfd_reloc_outofrange:
8484 This error can result when processing some partially
8485 complete binaries. Do not abort, but issue an error
8487 link_info->callbacks->einfo
8488 /* xgettext:c-format */
8489 (_("%X%P: %pB(%pA): relocation \"%pR\" goes out of range\n"),
8490 abfd, input_section, * parent);
8493 case bfd_reloc_notsupported:
8495 This error can result when processing a corrupt binary.
8496 Do not abort. Issue an error message instead. */
8497 link_info->callbacks->einfo
8498 /* xgettext:c-format */
8499 (_("%X%P: %pB(%pA): relocation \"%pR\" is not supported\n"),
8500 abfd, input_section, * parent);
8504 /* PR 17512; file: 90c2a92e.
8505 Report unexpected results, without aborting. */
8506 link_info->callbacks->einfo
8507 /* xgettext:c-format */
8508 (_("%X%P: %pB(%pA): relocation \"%pR\" returns an unrecognized value %x\n"),
8509 abfd, input_section, * parent, r);
8517 free (reloc_vector);
8521 free (reloc_vector);
8527 _bfd_generic_set_reloc
8530 void _bfd_generic_set_reloc
8534 unsigned int count);
8537 Installs a new set of internal relocations in SECTION.
8541 _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED,
8546 section->orelocation = relptr;
8547 section->reloc_count = count;
8552 _bfd_unrecognized_reloc
8555 bfd_boolean _bfd_unrecognized_reloc
8558 unsigned int r_type);
8561 Reports an unrecognized reloc.
8562 Written as a function in order to reduce code duplication.
8563 Returns FALSE so that it can be called from a return statement.
8567 _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type)
8569 /* xgettext:c-format */
8570 _bfd_error_handler (_("%pB: unrecognized relocation type %#x in section `%pA'"),
8571 abfd, r_type, section);
8573 /* PR 21803: Suggest the most likely cause of this error. */
8574 _bfd_error_handler (_("is this version of the linker - %s - out of date ?"),
8575 BFD_VERSION_STRING);
8577 bfd_set_error (bfd_error_bad_value);
8582 _bfd_norelocs_bfd_reloc_type_lookup
8584 bfd_reloc_code_real_type code ATTRIBUTE_UNUSED)
8586 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8590 _bfd_norelocs_bfd_reloc_name_lookup (bfd *abfd,
8591 const char *reloc_name ATTRIBUTE_UNUSED)
8593 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8597 _bfd_nodynamic_canonicalize_dynamic_reloc (bfd *abfd,
8598 arelent **relp ATTRIBUTE_UNUSED,
8599 asymbol **symp ATTRIBUTE_UNUSED)
8601 return _bfd_long_bfd_n1_error (abfd);