c1d9a30c64bc4239d9db8ee4e9303da01bd80d26
[platform/upstream/binutils.git] / bfd / elf64-mmix.c
1 /* MMIX-specific support for 64-bit ELF.
2    Copyright 2001, 2002, 2003, 2004, 2005, 2006, 2007
3    Free Software Foundation, Inc.
4    Contributed by Hans-Peter Nilsson <hp@bitrange.com>
5
6    This file is part of BFD, the Binary File Descriptor library.
7
8    This program is free software; you can redistribute it and/or modify
9    it under the terms of the GNU General Public License as published by
10    the Free Software Foundation; either version 3 of the License, or
11    (at your option) any later version.
12
13    This program is distributed in the hope that it will be useful,
14    but WITHOUT ANY WARRANTY; without even the implied warranty of
15    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16    GNU General Public License for more details.
17
18    You should have received a copy of the GNU General Public License
19    along with this program; if not, write to the Free Software
20    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
21    MA 02110-1301, USA.  */
22
23
24 /* No specific ABI or "processor-specific supplement" defined.  */
25
26 /* TODO:
27    - "Traditional" linker relaxation (shrinking whole sections).
28    - Merge reloc stubs jumping to same location.
29    - GETA stub relaxation (call a stub for out of range new
30      R_MMIX_GETA_STUBBABLE).  */
31
32 #include "sysdep.h"
33 #include "bfd.h"
34 #include "libbfd.h"
35 #include "elf-bfd.h"
36 #include "elf/mmix.h"
37 #include "opcode/mmix.h"
38
39 #define MINUS_ONE       (((bfd_vma) 0) - 1)
40
41 #define MAX_PUSHJ_STUB_SIZE (5 * 4)
42
43 /* Put these everywhere in new code.  */
44 #define FATAL_DEBUG                                             \
45  _bfd_abort (__FILE__, __LINE__,                                \
46              "Internal: Non-debugged code (test-case missing)")
47
48 #define BAD_CASE(x)                             \
49  _bfd_abort (__FILE__, __LINE__,                \
50              "bad case for " #x)
51
52 struct _mmix_elf_section_data
53 {
54   struct bfd_elf_section_data elf;
55   union
56   {
57     struct bpo_reloc_section_info *reloc;
58     struct bpo_greg_section_info *greg;
59   } bpo;
60
61   struct pushj_stub_info
62   {
63     /* Maximum number of stubs needed for this section.  */
64     bfd_size_type n_pushj_relocs;
65
66     /* Size of stubs after a mmix_elf_relax_section round.  */
67     bfd_size_type stubs_size_sum;
68
69     /* Per-reloc stubs_size_sum information.  The stubs_size_sum member is the sum
70        of these.  Allocated in mmix_elf_check_common_relocs.  */
71     bfd_size_type *stub_size;
72
73     /* Offset of next stub during relocation.  Somewhat redundant with the
74        above: error coverage is easier and we don't have to reset the
75        stubs_size_sum for relocation.  */
76     bfd_size_type stub_offset;
77   } pjs;
78 };
79
80 #define mmix_elf_section_data(sec) \
81   ((struct _mmix_elf_section_data *) elf_section_data (sec))
82
83 /* For each section containing a base-plus-offset (BPO) reloc, we attach
84    this struct as mmix_elf_section_data (section)->bpo, which is otherwise
85    NULL.  */
86 struct bpo_reloc_section_info
87   {
88     /* The base is 1; this is the first number in this section.  */
89     size_t first_base_plus_offset_reloc;
90
91     /* Number of BPO-relocs in this section.  */
92     size_t n_bpo_relocs_this_section;
93
94     /* Running index, used at relocation time.  */
95     size_t bpo_index;
96
97     /* We don't have access to the bfd_link_info struct in
98        mmix_final_link_relocate.  What we really want to get at is the
99        global single struct greg_relocation, so we stash it here.  */
100     asection *bpo_greg_section;
101   };
102
103 /* Helper struct (in global context) for the one below.
104    There's one of these created for every BPO reloc.  */
105 struct bpo_reloc_request
106   {
107     bfd_vma value;
108
109     /* Valid after relaxation.  The base is 0; the first register number
110        must be added.  The offset is in range 0..255.  */
111     size_t regindex;
112     size_t offset;
113
114     /* The order number for this BPO reloc, corresponding to the order in
115        which BPO relocs were found.  Used to create an index after reloc
116        requests are sorted.  */
117     size_t bpo_reloc_no;
118
119     /* Set when the value is computed.  Better than coding "guard values"
120        into the other members.  Is FALSE only for BPO relocs in a GC:ed
121        section.  */
122     bfd_boolean valid;
123   };
124
125 /* We attach this as mmix_elf_section_data (sec)->bpo in the linker-allocated
126    greg contents section (MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME),
127    which is linked into the register contents section
128    (MMIX_REG_CONTENTS_SECTION_NAME).  This section is created by the
129    linker; using the same hook as for usual with BPO relocs does not
130    collide.  */
131 struct bpo_greg_section_info
132   {
133     /* After GC, this reflects the number of remaining, non-excluded
134        BPO-relocs.  */
135     size_t n_bpo_relocs;
136
137     /* This is the number of allocated bpo_reloc_requests; the size of
138        sorted_indexes.  Valid after the check.*relocs functions are called
139        for all incoming sections.  It includes the number of BPO relocs in
140        sections that were GC:ed.  */
141     size_t n_max_bpo_relocs;
142
143     /* A counter used to find out when to fold the BPO gregs, since we
144        don't have a single "after-relaxation" hook.  */
145     size_t n_remaining_bpo_relocs_this_relaxation_round;
146
147     /* The number of linker-allocated GREGs resulting from BPO relocs.
148        This is an approximation after _bfd_mmix_before_linker_allocation
149        and supposedly accurate after mmix_elf_relax_section is called for
150        all incoming non-collected sections.  */
151     size_t n_allocated_bpo_gregs;
152
153     /* Index into reloc_request[], sorted on increasing "value", secondary
154        by increasing index for strict sorting order.  */
155     size_t *bpo_reloc_indexes;
156
157     /* An array of all relocations, with the "value" member filled in by
158        the relaxation function.  */
159     struct bpo_reloc_request *reloc_request;
160   };
161
162 static bfd_boolean mmix_elf_link_output_symbol_hook
163   PARAMS ((struct bfd_link_info *, const char *, Elf_Internal_Sym *,
164            asection *, struct elf_link_hash_entry *));
165
166 static bfd_reloc_status_type mmix_elf_reloc
167   PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
168
169 static reloc_howto_type *bfd_elf64_bfd_reloc_type_lookup
170   PARAMS ((bfd *, bfd_reloc_code_real_type));
171
172 static void mmix_info_to_howto_rela
173   PARAMS ((bfd *, arelent *, Elf_Internal_Rela *));
174
175 static int mmix_elf_sort_relocs PARAMS ((const PTR, const PTR));
176
177 static bfd_boolean mmix_elf_new_section_hook
178   PARAMS ((bfd *, asection *));
179
180 static bfd_boolean mmix_elf_check_relocs
181   PARAMS ((bfd *, struct bfd_link_info *, asection *,
182            const Elf_Internal_Rela *));
183
184 static bfd_boolean mmix_elf_check_common_relocs
185   PARAMS ((bfd *, struct bfd_link_info *, asection *,
186            const Elf_Internal_Rela *));
187
188 static bfd_boolean mmix_elf_relocate_section
189   PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
190            Elf_Internal_Rela *, Elf_Internal_Sym *, asection **));
191
192 static bfd_reloc_status_type mmix_final_link_relocate
193   PARAMS ((reloc_howto_type *, asection *, bfd_byte *,
194            bfd_vma, bfd_signed_vma, bfd_vma, const char *, asection *));
195
196 static bfd_reloc_status_type mmix_elf_perform_relocation
197   PARAMS ((asection *, reloc_howto_type *, PTR, bfd_vma, bfd_vma));
198
199 static bfd_boolean mmix_elf_section_from_bfd_section
200   PARAMS ((bfd *, asection *, int *));
201
202 static bfd_boolean mmix_elf_add_symbol_hook
203   PARAMS ((bfd *, struct bfd_link_info *, Elf_Internal_Sym *,
204            const char **, flagword *, asection **, bfd_vma *));
205
206 static bfd_boolean mmix_elf_is_local_label_name
207   PARAMS ((bfd *, const char *));
208
209 static int bpo_reloc_request_sort_fn PARAMS ((const PTR, const PTR));
210
211 static bfd_boolean mmix_elf_relax_section
212   PARAMS ((bfd *abfd, asection *sec, struct bfd_link_info *link_info,
213            bfd_boolean *again));
214
215 extern bfd_boolean mmix_elf_final_link PARAMS ((bfd *, struct bfd_link_info *));
216
217 extern void mmix_elf_symbol_processing PARAMS ((bfd *, asymbol *));
218
219 /* Only intended to be called from a debugger.  */
220 extern void mmix_dump_bpo_gregs
221   PARAMS ((struct bfd_link_info *, bfd_error_handler_type));
222
223 static void
224 mmix_set_relaxable_size
225   PARAMS ((bfd *, asection *, void *));
226
227
228 /* Watch out: this currently needs to have elements with the same index as
229    their R_MMIX_ number.  */
230 static reloc_howto_type elf_mmix_howto_table[] =
231  {
232   /* This reloc does nothing.  */
233   HOWTO (R_MMIX_NONE,           /* type */
234          0,                     /* rightshift */
235          2,                     /* size (0 = byte, 1 = short, 2 = long) */
236          32,                    /* bitsize */
237          FALSE,                 /* pc_relative */
238          0,                     /* bitpos */
239          complain_overflow_bitfield, /* complain_on_overflow */
240          bfd_elf_generic_reloc, /* special_function */
241          "R_MMIX_NONE",         /* name */
242          FALSE,                 /* partial_inplace */
243          0,                     /* src_mask */
244          0,                     /* dst_mask */
245          FALSE),                /* pcrel_offset */
246
247   /* An 8 bit absolute relocation.  */
248   HOWTO (R_MMIX_8,              /* type */
249          0,                     /* rightshift */
250          0,                     /* size (0 = byte, 1 = short, 2 = long) */
251          8,                     /* bitsize */
252          FALSE,                 /* pc_relative */
253          0,                     /* bitpos */
254          complain_overflow_bitfield, /* complain_on_overflow */
255          bfd_elf_generic_reloc, /* special_function */
256          "R_MMIX_8",            /* name */
257          FALSE,                 /* partial_inplace */
258          0,                     /* src_mask */
259          0xff,                  /* dst_mask */
260          FALSE),                /* pcrel_offset */
261
262   /* An 16 bit absolute relocation.  */
263   HOWTO (R_MMIX_16,             /* type */
264          0,                     /* rightshift */
265          1,                     /* size (0 = byte, 1 = short, 2 = long) */
266          16,                    /* bitsize */
267          FALSE,                 /* pc_relative */
268          0,                     /* bitpos */
269          complain_overflow_bitfield, /* complain_on_overflow */
270          bfd_elf_generic_reloc, /* special_function */
271          "R_MMIX_16",           /* name */
272          FALSE,                 /* partial_inplace */
273          0,                     /* src_mask */
274          0xffff,                /* dst_mask */
275          FALSE),                /* pcrel_offset */
276
277   /* An 24 bit absolute relocation.  */
278   HOWTO (R_MMIX_24,             /* type */
279          0,                     /* rightshift */
280          2,                     /* size (0 = byte, 1 = short, 2 = long) */
281          24,                    /* bitsize */
282          FALSE,                 /* pc_relative */
283          0,                     /* bitpos */
284          complain_overflow_bitfield, /* complain_on_overflow */
285          bfd_elf_generic_reloc, /* special_function */
286          "R_MMIX_24",           /* name */
287          FALSE,                 /* partial_inplace */
288          ~0xffffff,             /* src_mask */
289          0xffffff,              /* dst_mask */
290          FALSE),                /* pcrel_offset */
291
292   /* A 32 bit absolute relocation.  */
293   HOWTO (R_MMIX_32,             /* type */
294          0,                     /* rightshift */
295          2,                     /* size (0 = byte, 1 = short, 2 = long) */
296          32,                    /* bitsize */
297          FALSE,                 /* pc_relative */
298          0,                     /* bitpos */
299          complain_overflow_bitfield, /* complain_on_overflow */
300          bfd_elf_generic_reloc, /* special_function */
301          "R_MMIX_32",           /* name */
302          FALSE,                 /* partial_inplace */
303          0,                     /* src_mask */
304          0xffffffff,            /* dst_mask */
305          FALSE),                /* pcrel_offset */
306
307   /* 64 bit relocation.  */
308   HOWTO (R_MMIX_64,             /* type */
309          0,                     /* rightshift */
310          4,                     /* size (0 = byte, 1 = short, 2 = long) */
311          64,                    /* bitsize */
312          FALSE,                 /* pc_relative */
313          0,                     /* bitpos */
314          complain_overflow_bitfield, /* complain_on_overflow */
315          bfd_elf_generic_reloc, /* special_function */
316          "R_MMIX_64",           /* name */
317          FALSE,                 /* partial_inplace */
318          0,                     /* src_mask */
319          MINUS_ONE,             /* dst_mask */
320          FALSE),                /* pcrel_offset */
321
322   /* An 8 bit PC-relative relocation.  */
323   HOWTO (R_MMIX_PC_8,           /* type */
324          0,                     /* rightshift */
325          0,                     /* size (0 = byte, 1 = short, 2 = long) */
326          8,                     /* bitsize */
327          TRUE,                  /* pc_relative */
328          0,                     /* bitpos */
329          complain_overflow_bitfield, /* complain_on_overflow */
330          bfd_elf_generic_reloc, /* special_function */
331          "R_MMIX_PC_8",         /* name */
332          FALSE,                 /* partial_inplace */
333          0,                     /* src_mask */
334          0xff,                  /* dst_mask */
335          TRUE),                 /* pcrel_offset */
336
337   /* An 16 bit PC-relative relocation.  */
338   HOWTO (R_MMIX_PC_16,          /* type */
339          0,                     /* rightshift */
340          1,                     /* size (0 = byte, 1 = short, 2 = long) */
341          16,                    /* bitsize */
342          TRUE,                  /* pc_relative */
343          0,                     /* bitpos */
344          complain_overflow_bitfield, /* complain_on_overflow */
345          bfd_elf_generic_reloc, /* special_function */
346          "R_MMIX_PC_16",        /* name */
347          FALSE,                 /* partial_inplace */
348          0,                     /* src_mask */
349          0xffff,                /* dst_mask */
350          TRUE),                 /* pcrel_offset */
351
352   /* An 24 bit PC-relative relocation.  */
353   HOWTO (R_MMIX_PC_24,          /* type */
354          0,                     /* rightshift */
355          2,                     /* size (0 = byte, 1 = short, 2 = long) */
356          24,                    /* bitsize */
357          TRUE,                  /* pc_relative */
358          0,                     /* bitpos */
359          complain_overflow_bitfield, /* complain_on_overflow */
360          bfd_elf_generic_reloc, /* special_function */
361          "R_MMIX_PC_24",        /* name */
362          FALSE,                 /* partial_inplace */
363          ~0xffffff,             /* src_mask */
364          0xffffff,              /* dst_mask */
365          TRUE),                 /* pcrel_offset */
366
367   /* A 32 bit absolute PC-relative relocation.  */
368   HOWTO (R_MMIX_PC_32,          /* type */
369          0,                     /* rightshift */
370          2,                     /* size (0 = byte, 1 = short, 2 = long) */
371          32,                    /* bitsize */
372          TRUE,                  /* pc_relative */
373          0,                     /* bitpos */
374          complain_overflow_bitfield, /* complain_on_overflow */
375          bfd_elf_generic_reloc, /* special_function */
376          "R_MMIX_PC_32",        /* name */
377          FALSE,                 /* partial_inplace */
378          0,                     /* src_mask */
379          0xffffffff,            /* dst_mask */
380          TRUE),                 /* pcrel_offset */
381
382   /* 64 bit PC-relative relocation.  */
383   HOWTO (R_MMIX_PC_64,          /* type */
384          0,                     /* rightshift */
385          4,                     /* size (0 = byte, 1 = short, 2 = long) */
386          64,                    /* bitsize */
387          TRUE,                  /* pc_relative */
388          0,                     /* bitpos */
389          complain_overflow_bitfield, /* complain_on_overflow */
390          bfd_elf_generic_reloc, /* special_function */
391          "R_MMIX_PC_64",        /* name */
392          FALSE,                 /* partial_inplace */
393          0,                     /* src_mask */
394          MINUS_ONE,             /* dst_mask */
395          TRUE),                 /* pcrel_offset */
396
397   /* GNU extension to record C++ vtable hierarchy.  */
398   HOWTO (R_MMIX_GNU_VTINHERIT, /* type */
399          0,                     /* rightshift */
400          0,                     /* size (0 = byte, 1 = short, 2 = long) */
401          0,                     /* bitsize */
402          FALSE,                 /* pc_relative */
403          0,                     /* bitpos */
404          complain_overflow_dont, /* complain_on_overflow */
405          NULL,                  /* special_function */
406          "R_MMIX_GNU_VTINHERIT", /* name */
407          FALSE,                 /* partial_inplace */
408          0,                     /* src_mask */
409          0,                     /* dst_mask */
410          TRUE),                 /* pcrel_offset */
411
412   /* GNU extension to record C++ vtable member usage.  */
413   HOWTO (R_MMIX_GNU_VTENTRY,    /* type */
414          0,                     /* rightshift */
415          0,                     /* size (0 = byte, 1 = short, 2 = long) */
416          0,                     /* bitsize */
417          FALSE,                 /* pc_relative */
418          0,                     /* bitpos */
419          complain_overflow_dont, /* complain_on_overflow */
420          _bfd_elf_rel_vtable_reloc_fn,  /* special_function */
421          "R_MMIX_GNU_VTENTRY", /* name */
422          FALSE,                 /* partial_inplace */
423          0,                     /* src_mask */
424          0,                     /* dst_mask */
425          FALSE),                /* pcrel_offset */
426
427   /* The GETA relocation is supposed to get any address that could
428      possibly be reached by the GETA instruction.  It can silently expand
429      to get a 64-bit operand, but will complain if any of the two least
430      significant bits are set.  The howto members reflect a simple GETA.  */
431   HOWTO (R_MMIX_GETA,           /* type */
432          2,                     /* rightshift */
433          2,                     /* size (0 = byte, 1 = short, 2 = long) */
434          19,                    /* bitsize */
435          TRUE,                  /* pc_relative */
436          0,                     /* bitpos */
437          complain_overflow_signed, /* complain_on_overflow */
438          mmix_elf_reloc,        /* special_function */
439          "R_MMIX_GETA",         /* name */
440          FALSE,                 /* partial_inplace */
441          ~0x0100ffff,           /* src_mask */
442          0x0100ffff,            /* dst_mask */
443          TRUE),                 /* pcrel_offset */
444
445   HOWTO (R_MMIX_GETA_1,         /* type */
446          2,                     /* rightshift */
447          2,                     /* size (0 = byte, 1 = short, 2 = long) */
448          19,                    /* bitsize */
449          TRUE,                  /* pc_relative */
450          0,                     /* bitpos */
451          complain_overflow_signed, /* complain_on_overflow */
452          mmix_elf_reloc,        /* special_function */
453          "R_MMIX_GETA_1",               /* name */
454          FALSE,                 /* partial_inplace */
455          ~0x0100ffff,           /* src_mask */
456          0x0100ffff,            /* dst_mask */
457          TRUE),                 /* pcrel_offset */
458
459   HOWTO (R_MMIX_GETA_2,         /* type */
460          2,                     /* rightshift */
461          2,                     /* size (0 = byte, 1 = short, 2 = long) */
462          19,                    /* bitsize */
463          TRUE,                  /* pc_relative */
464          0,                     /* bitpos */
465          complain_overflow_signed, /* complain_on_overflow */
466          mmix_elf_reloc,        /* special_function */
467          "R_MMIX_GETA_2",               /* name */
468          FALSE,                 /* partial_inplace */
469          ~0x0100ffff,           /* src_mask */
470          0x0100ffff,            /* dst_mask */
471          TRUE),                 /* pcrel_offset */
472
473   HOWTO (R_MMIX_GETA_3,         /* type */
474          2,                     /* rightshift */
475          2,                     /* size (0 = byte, 1 = short, 2 = long) */
476          19,                    /* bitsize */
477          TRUE,                  /* pc_relative */
478          0,                     /* bitpos */
479          complain_overflow_signed, /* complain_on_overflow */
480          mmix_elf_reloc,        /* special_function */
481          "R_MMIX_GETA_3",               /* name */
482          FALSE,                 /* partial_inplace */
483          ~0x0100ffff,           /* src_mask */
484          0x0100ffff,            /* dst_mask */
485          TRUE),                 /* pcrel_offset */
486
487   /* The conditional branches are supposed to reach any (code) address.
488      It can silently expand to a 64-bit operand, but will emit an error if
489      any of the two least significant bits are set.  The howto members
490      reflect a simple branch.  */
491   HOWTO (R_MMIX_CBRANCH,        /* type */
492          2,                     /* rightshift */
493          2,                     /* size (0 = byte, 1 = short, 2 = long) */
494          19,                    /* bitsize */
495          TRUE,                  /* pc_relative */
496          0,                     /* bitpos */
497          complain_overflow_signed, /* complain_on_overflow */
498          mmix_elf_reloc,        /* special_function */
499          "R_MMIX_CBRANCH",      /* name */
500          FALSE,                 /* partial_inplace */
501          ~0x0100ffff,           /* src_mask */
502          0x0100ffff,            /* dst_mask */
503          TRUE),                 /* pcrel_offset */
504
505   HOWTO (R_MMIX_CBRANCH_J,      /* type */
506          2,                     /* rightshift */
507          2,                     /* size (0 = byte, 1 = short, 2 = long) */
508          19,                    /* bitsize */
509          TRUE,                  /* pc_relative */
510          0,                     /* bitpos */
511          complain_overflow_signed, /* complain_on_overflow */
512          mmix_elf_reloc,        /* special_function */
513          "R_MMIX_CBRANCH_J",    /* name */
514          FALSE,                 /* partial_inplace */
515          ~0x0100ffff,           /* src_mask */
516          0x0100ffff,            /* dst_mask */
517          TRUE),                 /* pcrel_offset */
518
519   HOWTO (R_MMIX_CBRANCH_1,      /* type */
520          2,                     /* rightshift */
521          2,                     /* size (0 = byte, 1 = short, 2 = long) */
522          19,                    /* bitsize */
523          TRUE,                  /* pc_relative */
524          0,                     /* bitpos */
525          complain_overflow_signed, /* complain_on_overflow */
526          mmix_elf_reloc,        /* special_function */
527          "R_MMIX_CBRANCH_1",    /* name */
528          FALSE,                 /* partial_inplace */
529          ~0x0100ffff,           /* src_mask */
530          0x0100ffff,            /* dst_mask */
531          TRUE),                 /* pcrel_offset */
532
533   HOWTO (R_MMIX_CBRANCH_2,      /* type */
534          2,                     /* rightshift */
535          2,                     /* size (0 = byte, 1 = short, 2 = long) */
536          19,                    /* bitsize */
537          TRUE,                  /* pc_relative */
538          0,                     /* bitpos */
539          complain_overflow_signed, /* complain_on_overflow */
540          mmix_elf_reloc,        /* special_function */
541          "R_MMIX_CBRANCH_2",    /* name */
542          FALSE,                 /* partial_inplace */
543          ~0x0100ffff,           /* src_mask */
544          0x0100ffff,            /* dst_mask */
545          TRUE),                 /* pcrel_offset */
546
547   HOWTO (R_MMIX_CBRANCH_3,      /* type */
548          2,                     /* rightshift */
549          2,                     /* size (0 = byte, 1 = short, 2 = long) */
550          19,                    /* bitsize */
551          TRUE,                  /* pc_relative */
552          0,                     /* bitpos */
553          complain_overflow_signed, /* complain_on_overflow */
554          mmix_elf_reloc,        /* special_function */
555          "R_MMIX_CBRANCH_3",    /* name */
556          FALSE,                 /* partial_inplace */
557          ~0x0100ffff,           /* src_mask */
558          0x0100ffff,            /* dst_mask */
559          TRUE),                 /* pcrel_offset */
560
561   /* The PUSHJ instruction can reach any (code) address, as long as it's
562      the beginning of a function (no usable restriction).  It can silently
563      expand to a 64-bit operand, but will emit an error if any of the two
564      least significant bits are set.  It can also expand into a call to a
565      stub; see R_MMIX_PUSHJ_STUBBABLE.  The howto members reflect a simple
566      PUSHJ.  */
567   HOWTO (R_MMIX_PUSHJ,          /* type */
568          2,                     /* rightshift */
569          2,                     /* size (0 = byte, 1 = short, 2 = long) */
570          19,                    /* bitsize */
571          TRUE,                  /* pc_relative */
572          0,                     /* bitpos */
573          complain_overflow_signed, /* complain_on_overflow */
574          mmix_elf_reloc,        /* special_function */
575          "R_MMIX_PUSHJ",        /* name */
576          FALSE,                 /* partial_inplace */
577          ~0x0100ffff,           /* src_mask */
578          0x0100ffff,            /* dst_mask */
579          TRUE),                 /* pcrel_offset */
580
581   HOWTO (R_MMIX_PUSHJ_1,        /* type */
582          2,                     /* rightshift */
583          2,                     /* size (0 = byte, 1 = short, 2 = long) */
584          19,                    /* bitsize */
585          TRUE,                  /* pc_relative */
586          0,                     /* bitpos */
587          complain_overflow_signed, /* complain_on_overflow */
588          mmix_elf_reloc,        /* special_function */
589          "R_MMIX_PUSHJ_1",      /* name */
590          FALSE,                 /* partial_inplace */
591          ~0x0100ffff,           /* src_mask */
592          0x0100ffff,            /* dst_mask */
593          TRUE),                 /* pcrel_offset */
594
595   HOWTO (R_MMIX_PUSHJ_2,        /* type */
596          2,                     /* rightshift */
597          2,                     /* size (0 = byte, 1 = short, 2 = long) */
598          19,                    /* bitsize */
599          TRUE,                  /* pc_relative */
600          0,                     /* bitpos */
601          complain_overflow_signed, /* complain_on_overflow */
602          mmix_elf_reloc,        /* special_function */
603          "R_MMIX_PUSHJ_2",      /* name */
604          FALSE,                 /* partial_inplace */
605          ~0x0100ffff,           /* src_mask */
606          0x0100ffff,            /* dst_mask */
607          TRUE),                 /* pcrel_offset */
608
609   HOWTO (R_MMIX_PUSHJ_3,        /* type */
610          2,                     /* rightshift */
611          2,                     /* size (0 = byte, 1 = short, 2 = long) */
612          19,                    /* bitsize */
613          TRUE,                  /* pc_relative */
614          0,                     /* bitpos */
615          complain_overflow_signed, /* complain_on_overflow */
616          mmix_elf_reloc,        /* special_function */
617          "R_MMIX_PUSHJ_3",      /* name */
618          FALSE,                 /* partial_inplace */
619          ~0x0100ffff,           /* src_mask */
620          0x0100ffff,            /* dst_mask */
621          TRUE),                 /* pcrel_offset */
622
623   /* A JMP is supposed to reach any (code) address.  By itself, it can
624      reach +-64M; the expansion can reach all 64 bits.  Note that the 64M
625      limit is soon reached if you link the program in wildly different
626      memory segments.  The howto members reflect a trivial JMP.  */
627   HOWTO (R_MMIX_JMP,            /* type */
628          2,                     /* rightshift */
629          2,                     /* size (0 = byte, 1 = short, 2 = long) */
630          27,                    /* bitsize */
631          TRUE,                  /* pc_relative */
632          0,                     /* bitpos */
633          complain_overflow_signed, /* complain_on_overflow */
634          mmix_elf_reloc,        /* special_function */
635          "R_MMIX_JMP",          /* name */
636          FALSE,                 /* partial_inplace */
637          ~0x1ffffff,            /* src_mask */
638          0x1ffffff,             /* dst_mask */
639          TRUE),                 /* pcrel_offset */
640
641   HOWTO (R_MMIX_JMP_1,          /* type */
642          2,                     /* rightshift */
643          2,                     /* size (0 = byte, 1 = short, 2 = long) */
644          27,                    /* bitsize */
645          TRUE,                  /* pc_relative */
646          0,                     /* bitpos */
647          complain_overflow_signed, /* complain_on_overflow */
648          mmix_elf_reloc,        /* special_function */
649          "R_MMIX_JMP_1",        /* name */
650          FALSE,                 /* partial_inplace */
651          ~0x1ffffff,            /* src_mask */
652          0x1ffffff,             /* dst_mask */
653          TRUE),                 /* pcrel_offset */
654
655   HOWTO (R_MMIX_JMP_2,          /* type */
656          2,                     /* rightshift */
657          2,                     /* size (0 = byte, 1 = short, 2 = long) */
658          27,                    /* bitsize */
659          TRUE,                  /* pc_relative */
660          0,                     /* bitpos */
661          complain_overflow_signed, /* complain_on_overflow */
662          mmix_elf_reloc,        /* special_function */
663          "R_MMIX_JMP_2",        /* name */
664          FALSE,                 /* partial_inplace */
665          ~0x1ffffff,            /* src_mask */
666          0x1ffffff,             /* dst_mask */
667          TRUE),                 /* pcrel_offset */
668
669   HOWTO (R_MMIX_JMP_3,          /* type */
670          2,                     /* rightshift */
671          2,                     /* size (0 = byte, 1 = short, 2 = long) */
672          27,                    /* bitsize */
673          TRUE,                  /* pc_relative */
674          0,                     /* bitpos */
675          complain_overflow_signed, /* complain_on_overflow */
676          mmix_elf_reloc,        /* special_function */
677          "R_MMIX_JMP_3",        /* name */
678          FALSE,                 /* partial_inplace */
679          ~0x1ffffff,            /* src_mask */
680          0x1ffffff,             /* dst_mask */
681          TRUE),                 /* pcrel_offset */
682
683   /* When we don't emit link-time-relaxable code from the assembler, or
684      when relaxation has done all it can do, these relocs are used.  For
685      GETA/PUSHJ/branches.  */
686   HOWTO (R_MMIX_ADDR19,         /* type */
687          2,                     /* rightshift */
688          2,                     /* size (0 = byte, 1 = short, 2 = long) */
689          19,                    /* bitsize */
690          TRUE,                  /* pc_relative */
691          0,                     /* bitpos */
692          complain_overflow_signed, /* complain_on_overflow */
693          mmix_elf_reloc,        /* special_function */
694          "R_MMIX_ADDR19",       /* name */
695          FALSE,                 /* partial_inplace */
696          ~0x0100ffff,           /* src_mask */
697          0x0100ffff,            /* dst_mask */
698          TRUE),                 /* pcrel_offset */
699
700   /* For JMP.  */
701   HOWTO (R_MMIX_ADDR27,         /* type */
702          2,                     /* rightshift */
703          2,                     /* size (0 = byte, 1 = short, 2 = long) */
704          27,                    /* bitsize */
705          TRUE,                  /* pc_relative */
706          0,                     /* bitpos */
707          complain_overflow_signed, /* complain_on_overflow */
708          mmix_elf_reloc,        /* special_function */
709          "R_MMIX_ADDR27",       /* name */
710          FALSE,                 /* partial_inplace */
711          ~0x1ffffff,            /* src_mask */
712          0x1ffffff,             /* dst_mask */
713          TRUE),                 /* pcrel_offset */
714
715   /* A general register or the value 0..255.  If a value, then the
716      instruction (offset -3) needs adjusting.  */
717   HOWTO (R_MMIX_REG_OR_BYTE,    /* type */
718          0,                     /* rightshift */
719          1,                     /* size (0 = byte, 1 = short, 2 = long) */
720          8,                     /* bitsize */
721          FALSE,                 /* pc_relative */
722          0,                     /* bitpos */
723          complain_overflow_bitfield, /* complain_on_overflow */
724          mmix_elf_reloc,        /* special_function */
725          "R_MMIX_REG_OR_BYTE",  /* name */
726          FALSE,                 /* partial_inplace */
727          0,                     /* src_mask */
728          0xff,                  /* dst_mask */
729          FALSE),                /* pcrel_offset */
730
731   /* A general register.  */
732   HOWTO (R_MMIX_REG,            /* type */
733          0,                     /* rightshift */
734          1,                     /* size (0 = byte, 1 = short, 2 = long) */
735          8,                     /* bitsize */
736          FALSE,                 /* pc_relative */
737          0,                     /* bitpos */
738          complain_overflow_bitfield, /* complain_on_overflow */
739          mmix_elf_reloc,        /* special_function */
740          "R_MMIX_REG",          /* name */
741          FALSE,                 /* partial_inplace */
742          0,                     /* src_mask */
743          0xff,                  /* dst_mask */
744          FALSE),                /* pcrel_offset */
745
746   /* A register plus an index, corresponding to the relocation expression.
747      The sizes must correspond to the valid range of the expression, while
748      the bitmasks correspond to what we store in the image.  */
749   HOWTO (R_MMIX_BASE_PLUS_OFFSET,       /* type */
750          0,                     /* rightshift */
751          4,                     /* size (0 = byte, 1 = short, 2 = long) */
752          64,                    /* bitsize */
753          FALSE,                 /* pc_relative */
754          0,                     /* bitpos */
755          complain_overflow_bitfield, /* complain_on_overflow */
756          mmix_elf_reloc,        /* special_function */
757          "R_MMIX_BASE_PLUS_OFFSET", /* name */
758          FALSE,                 /* partial_inplace */
759          0,                     /* src_mask */
760          0xffff,                /* dst_mask */
761          FALSE),                /* pcrel_offset */
762
763   /* A "magic" relocation for a LOCAL expression, asserting that the
764      expression is less than the number of global registers.  No actual
765      modification of the contents is done.  Implementing this as a
766      relocation was less intrusive than e.g. putting such expressions in a
767      section to discard *after* relocation.  */
768   HOWTO (R_MMIX_LOCAL,          /* type */
769          0,                     /* rightshift */
770          0,                     /* size (0 = byte, 1 = short, 2 = long) */
771          0,                     /* bitsize */
772          FALSE,                 /* pc_relative */
773          0,                     /* bitpos */
774          complain_overflow_dont, /* complain_on_overflow */
775          mmix_elf_reloc,        /* special_function */
776          "R_MMIX_LOCAL",        /* name */
777          FALSE,                 /* partial_inplace */
778          0,                     /* src_mask */
779          0,                     /* dst_mask */
780          FALSE),                /* pcrel_offset */
781
782   HOWTO (R_MMIX_PUSHJ_STUBBABLE, /* type */
783          2,                     /* rightshift */
784          2,                     /* size (0 = byte, 1 = short, 2 = long) */
785          19,                    /* bitsize */
786          TRUE,                  /* pc_relative */
787          0,                     /* bitpos */
788          complain_overflow_signed, /* complain_on_overflow */
789          mmix_elf_reloc,        /* special_function */
790          "R_MMIX_PUSHJ_STUBBABLE", /* name */
791          FALSE,                 /* partial_inplace */
792          ~0x0100ffff,           /* src_mask */
793          0x0100ffff,            /* dst_mask */
794          TRUE)                  /* pcrel_offset */
795  };
796
797
798 /* Map BFD reloc types to MMIX ELF reloc types.  */
799
800 struct mmix_reloc_map
801   {
802     bfd_reloc_code_real_type bfd_reloc_val;
803     enum elf_mmix_reloc_type elf_reloc_val;
804   };
805
806
807 static const struct mmix_reloc_map mmix_reloc_map[] =
808   {
809     {BFD_RELOC_NONE, R_MMIX_NONE},
810     {BFD_RELOC_8, R_MMIX_8},
811     {BFD_RELOC_16, R_MMIX_16},
812     {BFD_RELOC_24, R_MMIX_24},
813     {BFD_RELOC_32, R_MMIX_32},
814     {BFD_RELOC_64, R_MMIX_64},
815     {BFD_RELOC_8_PCREL, R_MMIX_PC_8},
816     {BFD_RELOC_16_PCREL, R_MMIX_PC_16},
817     {BFD_RELOC_24_PCREL, R_MMIX_PC_24},
818     {BFD_RELOC_32_PCREL, R_MMIX_PC_32},
819     {BFD_RELOC_64_PCREL, R_MMIX_PC_64},
820     {BFD_RELOC_VTABLE_INHERIT, R_MMIX_GNU_VTINHERIT},
821     {BFD_RELOC_VTABLE_ENTRY, R_MMIX_GNU_VTENTRY},
822     {BFD_RELOC_MMIX_GETA, R_MMIX_GETA},
823     {BFD_RELOC_MMIX_CBRANCH, R_MMIX_CBRANCH},
824     {BFD_RELOC_MMIX_PUSHJ, R_MMIX_PUSHJ},
825     {BFD_RELOC_MMIX_JMP, R_MMIX_JMP},
826     {BFD_RELOC_MMIX_ADDR19, R_MMIX_ADDR19},
827     {BFD_RELOC_MMIX_ADDR27, R_MMIX_ADDR27},
828     {BFD_RELOC_MMIX_REG_OR_BYTE, R_MMIX_REG_OR_BYTE},
829     {BFD_RELOC_MMIX_REG, R_MMIX_REG},
830     {BFD_RELOC_MMIX_BASE_PLUS_OFFSET, R_MMIX_BASE_PLUS_OFFSET},
831     {BFD_RELOC_MMIX_LOCAL, R_MMIX_LOCAL},
832     {BFD_RELOC_MMIX_PUSHJ_STUBBABLE, R_MMIX_PUSHJ_STUBBABLE}
833   };
834
835 static reloc_howto_type *
836 bfd_elf64_bfd_reloc_type_lookup (abfd, code)
837      bfd *abfd ATTRIBUTE_UNUSED;
838      bfd_reloc_code_real_type code;
839 {
840   unsigned int i;
841
842   for (i = 0;
843        i < sizeof (mmix_reloc_map) / sizeof (mmix_reloc_map[0]);
844        i++)
845     {
846       if (mmix_reloc_map[i].bfd_reloc_val == code)
847         return &elf_mmix_howto_table[mmix_reloc_map[i].elf_reloc_val];
848     }
849
850   return NULL;
851 }
852
853 static reloc_howto_type *
854 bfd_elf64_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
855                                  const char *r_name)
856 {
857   unsigned int i;
858
859   for (i = 0;
860        i < sizeof (elf_mmix_howto_table) / sizeof (elf_mmix_howto_table[0]);
861        i++)
862     if (elf_mmix_howto_table[i].name != NULL
863         && strcasecmp (elf_mmix_howto_table[i].name, r_name) == 0)
864       return &elf_mmix_howto_table[i];
865
866   return NULL;
867 }
868
869 static bfd_boolean
870 mmix_elf_new_section_hook (abfd, sec)
871      bfd *abfd;
872      asection *sec;
873 {
874   if (!sec->used_by_bfd)
875     {
876       struct _mmix_elf_section_data *sdata;
877       bfd_size_type amt = sizeof (*sdata);
878
879       sdata = bfd_zalloc (abfd, amt);
880       if (sdata == NULL)
881         return FALSE;
882       sec->used_by_bfd = sdata;
883     }
884
885   return _bfd_elf_new_section_hook (abfd, sec);
886 }
887
888
889 /* This function performs the actual bitfiddling and sanity check for a
890    final relocation.  Each relocation gets its *worst*-case expansion
891    in size when it arrives here; any reduction in size should have been
892    caught in linker relaxation earlier.  When we get here, the relocation
893    looks like the smallest instruction with SWYM:s (nop:s) appended to the
894    max size.  We fill in those nop:s.
895
896    R_MMIX_GETA: (FIXME: Relaxation should break this up in 1, 2, 3 tetra)
897     GETA $N,foo
898    ->
899     SETL $N,foo & 0xffff
900     INCML $N,(foo >> 16) & 0xffff
901     INCMH $N,(foo >> 32) & 0xffff
902     INCH $N,(foo >> 48) & 0xffff
903
904    R_MMIX_CBRANCH: (FIXME: Relaxation should break this up, but
905    condbranches needing relaxation might be rare enough to not be
906    worthwhile.)
907     [P]Bcc $N,foo
908    ->
909     [~P]B~cc $N,.+20
910     SETL $255,foo & ...
911     INCML ...
912     INCMH ...
913     INCH ...
914     GO $255,$255,0
915
916    R_MMIX_PUSHJ: (FIXME: Relaxation...)
917     PUSHJ $N,foo
918    ->
919     SETL $255,foo & ...
920     INCML ...
921     INCMH ...
922     INCH ...
923     PUSHGO $N,$255,0
924
925    R_MMIX_JMP: (FIXME: Relaxation...)
926     JMP foo
927    ->
928     SETL $255,foo & ...
929     INCML ...
930     INCMH ...
931     INCH ...
932     GO $255,$255,0
933
934    R_MMIX_ADDR19 and R_MMIX_ADDR27 are just filled in.  */
935
936 static bfd_reloc_status_type
937 mmix_elf_perform_relocation (isec, howto, datap, addr, value)
938      asection *isec;
939      reloc_howto_type *howto;
940      PTR datap;
941      bfd_vma addr;
942      bfd_vma value;
943 {
944   bfd *abfd = isec->owner;
945   bfd_reloc_status_type flag = bfd_reloc_ok;
946   bfd_reloc_status_type r;
947   int offs = 0;
948   int reg = 255;
949
950   /* The worst case bits are all similar SETL/INCML/INCMH/INCH sequences.
951      We handle the differences here and the common sequence later.  */
952   switch (howto->type)
953     {
954     case R_MMIX_GETA:
955       offs = 0;
956       reg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
957
958       /* We change to an absolute value.  */
959       value += addr;
960       break;
961
962     case R_MMIX_CBRANCH:
963       {
964         int in1 = bfd_get_16 (abfd, (bfd_byte *) datap) << 16;
965
966         /* Invert the condition and prediction bit, and set the offset
967            to five instructions ahead.
968
969            We *can* do better if we want to.  If the branch is found to be
970            within limits, we could leave the branch as is; there'll just
971            be a bunch of NOP:s after it.  But we shouldn't see this
972            sequence often enough that it's worth doing it.  */
973
974         bfd_put_32 (abfd,
975                     (((in1 ^ ((PRED_INV_BIT | COND_INV_BIT) << 24)) & ~0xffff)
976                      | (24/4)),
977                     (bfd_byte *) datap);
978
979         /* Put a "GO $255,$255,0" after the common sequence.  */
980         bfd_put_32 (abfd,
981                     ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) | 0xffff00,
982                     (bfd_byte *) datap + 20);
983
984         /* Common sequence starts at offset 4.  */
985         offs = 4;
986
987         /* We change to an absolute value.  */
988         value += addr;
989       }
990       break;
991
992     case R_MMIX_PUSHJ_STUBBABLE:
993       /* If the address fits, we're fine.  */
994       if ((value & 3) == 0
995           /* Note rightshift 0; see R_MMIX_JMP case below.  */
996           && (r = bfd_check_overflow (complain_overflow_signed,
997                                       howto->bitsize,
998                                       0,
999                                       bfd_arch_bits_per_address (abfd),
1000                                       value)) == bfd_reloc_ok)
1001         goto pcrel_mmix_reloc_fits;
1002       else
1003         {
1004           bfd_size_type size = isec->rawsize ? isec->rawsize : isec->size;
1005
1006           /* We have the bytes at the PUSHJ insn and need to get the
1007              position for the stub.  There's supposed to be room allocated
1008              for the stub.  */
1009           bfd_byte *stubcontents
1010             = ((bfd_byte *) datap
1011                - (addr - (isec->output_section->vma + isec->output_offset))
1012                + size
1013                + mmix_elf_section_data (isec)->pjs.stub_offset);
1014           bfd_vma stubaddr;
1015
1016           /* The address doesn't fit, so redirect the PUSHJ to the
1017              location of the stub.  */
1018           r = mmix_elf_perform_relocation (isec,
1019                                            &elf_mmix_howto_table
1020                                            [R_MMIX_ADDR19],
1021                                            datap,
1022                                            addr,
1023                                            isec->output_section->vma
1024                                            + isec->output_offset
1025                                            + size
1026                                            + (mmix_elf_section_data (isec)
1027                                               ->pjs.stub_offset)
1028                                            - addr);
1029           if (r != bfd_reloc_ok)
1030             return r;
1031
1032           stubaddr
1033             = (isec->output_section->vma
1034                + isec->output_offset
1035                + size
1036                + mmix_elf_section_data (isec)->pjs.stub_offset);
1037
1038           /* We generate a simple JMP if that suffices, else the whole 5
1039              insn stub.  */
1040           if (bfd_check_overflow (complain_overflow_signed,
1041                                   elf_mmix_howto_table[R_MMIX_ADDR27].bitsize,
1042                                   0,
1043                                   bfd_arch_bits_per_address (abfd),
1044                                   addr + value - stubaddr) == bfd_reloc_ok)
1045             {
1046               bfd_put_32 (abfd, JMP_INSN_BYTE << 24, stubcontents);
1047               r = mmix_elf_perform_relocation (isec,
1048                                                &elf_mmix_howto_table
1049                                                [R_MMIX_ADDR27],
1050                                                stubcontents,
1051                                                stubaddr,
1052                                                value + addr - stubaddr);
1053               mmix_elf_section_data (isec)->pjs.stub_offset += 4;
1054
1055               if (size + mmix_elf_section_data (isec)->pjs.stub_offset
1056                   > isec->size)
1057                 abort ();
1058
1059               return r;
1060             }
1061           else
1062             {
1063               /* Put a "GO $255,0" after the common sequence.  */
1064               bfd_put_32 (abfd,
1065                           ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1066                           | 0xff00, (bfd_byte *) stubcontents + 16);
1067
1068               /* Prepare for the general code to set the first part of the
1069                  linker stub, and */
1070               value += addr;
1071               datap = stubcontents;
1072               mmix_elf_section_data (isec)->pjs.stub_offset
1073                 += MAX_PUSHJ_STUB_SIZE;
1074             }
1075         }
1076       break;
1077
1078     case R_MMIX_PUSHJ:
1079       {
1080         int inreg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
1081
1082         /* Put a "PUSHGO $N,$255,0" after the common sequence.  */
1083         bfd_put_32 (abfd,
1084                     ((PUSHGO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1085                     | (inreg << 16)
1086                     | 0xff00,
1087                     (bfd_byte *) datap + 16);
1088
1089         /* We change to an absolute value.  */
1090         value += addr;
1091       }
1092       break;
1093
1094     case R_MMIX_JMP:
1095       /* This one is a little special.  If we get here on a non-relaxing
1096          link, and the destination is actually in range, we don't need to
1097          execute the nops.
1098          If so, we fall through to the bit-fiddling relocs.
1099
1100          FIXME: bfd_check_overflow seems broken; the relocation is
1101          rightshifted before testing, so supply a zero rightshift.  */
1102
1103       if (! ((value & 3) == 0
1104              && (r = bfd_check_overflow (complain_overflow_signed,
1105                                          howto->bitsize,
1106                                          0,
1107                                          bfd_arch_bits_per_address (abfd),
1108                                          value)) == bfd_reloc_ok))
1109         {
1110           /* If the relocation doesn't fit in a JMP, we let the NOP:s be
1111              modified below, and put a "GO $255,$255,0" after the
1112              address-loading sequence.  */
1113           bfd_put_32 (abfd,
1114                       ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1115                       | 0xffff00,
1116                       (bfd_byte *) datap + 16);
1117
1118           /* We change to an absolute value.  */
1119           value += addr;
1120           break;
1121         }
1122       /* FALLTHROUGH.  */
1123     case R_MMIX_ADDR19:
1124     case R_MMIX_ADDR27:
1125     pcrel_mmix_reloc_fits:
1126       /* These must be in range, or else we emit an error.  */
1127       if ((value & 3) == 0
1128           /* Note rightshift 0; see above.  */
1129           && (r = bfd_check_overflow (complain_overflow_signed,
1130                                       howto->bitsize,
1131                                       0,
1132                                       bfd_arch_bits_per_address (abfd),
1133                                       value)) == bfd_reloc_ok)
1134         {
1135           bfd_vma in1
1136             = bfd_get_32 (abfd, (bfd_byte *) datap);
1137           bfd_vma highbit;
1138
1139           if ((bfd_signed_vma) value < 0)
1140             {
1141               highbit = 1 << 24;
1142               value += (1 << (howto->bitsize - 1));
1143             }
1144           else
1145             highbit = 0;
1146
1147           value >>= 2;
1148
1149           bfd_put_32 (abfd,
1150                       (in1 & howto->src_mask)
1151                       | highbit
1152                       | (value & howto->dst_mask),
1153                       (bfd_byte *) datap);
1154
1155           return bfd_reloc_ok;
1156         }
1157       else
1158         return bfd_reloc_overflow;
1159
1160     case R_MMIX_BASE_PLUS_OFFSET:
1161       {
1162         struct bpo_reloc_section_info *bpodata
1163           = mmix_elf_section_data (isec)->bpo.reloc;
1164         asection *bpo_greg_section
1165           = bpodata->bpo_greg_section;
1166         struct bpo_greg_section_info *gregdata
1167           = mmix_elf_section_data (bpo_greg_section)->bpo.greg;
1168         size_t bpo_index
1169           = gregdata->bpo_reloc_indexes[bpodata->bpo_index++];
1170
1171         /* A consistency check: The value we now have in "relocation" must
1172            be the same as the value we stored for that relocation.  It
1173            doesn't cost much, so can be left in at all times.  */
1174         if (value != gregdata->reloc_request[bpo_index].value)
1175           {
1176             (*_bfd_error_handler)
1177               (_("%s: Internal inconsistency error for value for\n\
1178  linker-allocated global register: linked: 0x%lx%08lx != relaxed: 0x%lx%08lx\n"),
1179                bfd_get_filename (isec->owner),
1180                (unsigned long) (value >> 32), (unsigned long) value,
1181                (unsigned long) (gregdata->reloc_request[bpo_index].value
1182                                 >> 32),
1183                (unsigned long) gregdata->reloc_request[bpo_index].value);
1184             bfd_set_error (bfd_error_bad_value);
1185             return bfd_reloc_overflow;
1186           }
1187
1188         /* Then store the register number and offset for that register
1189            into datap and datap + 1 respectively.  */
1190         bfd_put_8 (abfd,
1191                    gregdata->reloc_request[bpo_index].regindex
1192                    + bpo_greg_section->output_section->vma / 8,
1193                    datap);
1194         bfd_put_8 (abfd,
1195                    gregdata->reloc_request[bpo_index].offset,
1196                    ((unsigned char *) datap) + 1);
1197         return bfd_reloc_ok;
1198       }
1199
1200     case R_MMIX_REG_OR_BYTE:
1201     case R_MMIX_REG:
1202       if (value > 255)
1203         return bfd_reloc_overflow;
1204       bfd_put_8 (abfd, value, datap);
1205       return bfd_reloc_ok;
1206
1207     default:
1208       BAD_CASE (howto->type);
1209     }
1210
1211   /* This code adds the common SETL/INCML/INCMH/INCH worst-case
1212      sequence.  */
1213
1214   /* Lowest two bits must be 0.  We return bfd_reloc_overflow for
1215      everything that looks strange.  */
1216   if (value & 3)
1217     flag = bfd_reloc_overflow;
1218
1219   bfd_put_32 (abfd,
1220               (SETL_INSN_BYTE << 24) | (value & 0xffff) | (reg << 16),
1221               (bfd_byte *) datap + offs);
1222   bfd_put_32 (abfd,
1223               (INCML_INSN_BYTE << 24) | ((value >> 16) & 0xffff) | (reg << 16),
1224               (bfd_byte *) datap + offs + 4);
1225   bfd_put_32 (abfd,
1226               (INCMH_INSN_BYTE << 24) | ((value >> 32) & 0xffff) | (reg << 16),
1227               (bfd_byte *) datap + offs + 8);
1228   bfd_put_32 (abfd,
1229               (INCH_INSN_BYTE << 24) | ((value >> 48) & 0xffff) | (reg << 16),
1230               (bfd_byte *) datap + offs + 12);
1231
1232   return flag;
1233 }
1234
1235 /* Set the howto pointer for an MMIX ELF reloc (type RELA).  */
1236
1237 static void
1238 mmix_info_to_howto_rela (abfd, cache_ptr, dst)
1239      bfd *abfd ATTRIBUTE_UNUSED;
1240      arelent *cache_ptr;
1241      Elf_Internal_Rela *dst;
1242 {
1243   unsigned int r_type;
1244
1245   r_type = ELF64_R_TYPE (dst->r_info);
1246   BFD_ASSERT (r_type < (unsigned int) R_MMIX_max);
1247   cache_ptr->howto = &elf_mmix_howto_table[r_type];
1248 }
1249
1250 /* Any MMIX-specific relocation gets here at assembly time or when linking
1251    to other formats (such as mmo); this is the relocation function from
1252    the reloc_table.  We don't get here for final pure ELF linking.  */
1253
1254 static bfd_reloc_status_type
1255 mmix_elf_reloc (abfd, reloc_entry, symbol, data, input_section,
1256                 output_bfd, error_message)
1257      bfd *abfd;
1258      arelent *reloc_entry;
1259      asymbol *symbol;
1260      PTR data;
1261      asection *input_section;
1262      bfd *output_bfd;
1263      char **error_message ATTRIBUTE_UNUSED;
1264 {
1265   bfd_vma relocation;
1266   bfd_reloc_status_type r;
1267   asection *reloc_target_output_section;
1268   bfd_reloc_status_type flag = bfd_reloc_ok;
1269   bfd_vma output_base = 0;
1270   bfd_vma addr;
1271
1272   r = bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data,
1273                              input_section, output_bfd, error_message);
1274
1275   /* If that was all that was needed (i.e. this isn't a final link, only
1276      some segment adjustments), we're done.  */
1277   if (r != bfd_reloc_continue)
1278     return r;
1279
1280   if (bfd_is_und_section (symbol->section)
1281       && (symbol->flags & BSF_WEAK) == 0
1282       && output_bfd == (bfd *) NULL)
1283     return bfd_reloc_undefined;
1284
1285   /* Is the address of the relocation really within the section?  */
1286   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1287     return bfd_reloc_outofrange;
1288
1289   /* Work out which section the relocation is targeted at and the
1290      initial relocation command value.  */
1291
1292   /* Get symbol value.  (Common symbols are special.)  */
1293   if (bfd_is_com_section (symbol->section))
1294     relocation = 0;
1295   else
1296     relocation = symbol->value;
1297
1298   reloc_target_output_section = bfd_get_output_section (symbol);
1299
1300   /* Here the variable relocation holds the final address of the symbol we
1301      are relocating against, plus any addend.  */
1302   if (output_bfd)
1303     output_base = 0;
1304   else
1305     output_base = reloc_target_output_section->vma;
1306
1307   relocation += output_base + symbol->section->output_offset;
1308
1309   /* Get position of relocation.  */
1310   addr = (reloc_entry->address + input_section->output_section->vma
1311           + input_section->output_offset);
1312   if (output_bfd != (bfd *) NULL)
1313     {
1314       /* Add in supplied addend.  */
1315       relocation += reloc_entry->addend;
1316
1317       /* This is a partial relocation, and we want to apply the
1318          relocation to the reloc entry rather than the raw data.
1319          Modify the reloc inplace to reflect what we now know.  */
1320       reloc_entry->addend = relocation;
1321       reloc_entry->address += input_section->output_offset;
1322       return flag;
1323     }
1324
1325   return mmix_final_link_relocate (reloc_entry->howto, input_section,
1326                                    data, reloc_entry->address,
1327                                    reloc_entry->addend, relocation,
1328                                    bfd_asymbol_name (symbol),
1329                                    reloc_target_output_section);
1330 }
1331 \f
1332 /* Relocate an MMIX ELF section.  Modified from elf32-fr30.c; look to it
1333    for guidance if you're thinking of copying this.  */
1334
1335 static bfd_boolean
1336 mmix_elf_relocate_section (output_bfd, info, input_bfd, input_section,
1337                            contents, relocs, local_syms, local_sections)
1338      bfd *output_bfd ATTRIBUTE_UNUSED;
1339      struct bfd_link_info *info;
1340      bfd *input_bfd;
1341      asection *input_section;
1342      bfd_byte *contents;
1343      Elf_Internal_Rela *relocs;
1344      Elf_Internal_Sym *local_syms;
1345      asection **local_sections;
1346 {
1347   Elf_Internal_Shdr *symtab_hdr;
1348   struct elf_link_hash_entry **sym_hashes;
1349   Elf_Internal_Rela *rel;
1350   Elf_Internal_Rela *relend;
1351   bfd_size_type size;
1352   size_t pjsno = 0;
1353
1354   size = input_section->rawsize ? input_section->rawsize : input_section->size;
1355   symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
1356   sym_hashes = elf_sym_hashes (input_bfd);
1357   relend = relocs + input_section->reloc_count;
1358
1359   /* Zero the stub area before we start.  */
1360   if (input_section->rawsize != 0
1361       && input_section->size > input_section->rawsize)
1362     memset (contents + input_section->rawsize, 0,
1363             input_section->size - input_section->rawsize);
1364
1365   for (rel = relocs; rel < relend; rel ++)
1366     {
1367       reloc_howto_type *howto;
1368       unsigned long r_symndx;
1369       Elf_Internal_Sym *sym;
1370       asection *sec;
1371       struct elf_link_hash_entry *h;
1372       bfd_vma relocation;
1373       bfd_reloc_status_type r;
1374       const char *name = NULL;
1375       int r_type;
1376       bfd_boolean undefined_signalled = FALSE;
1377
1378       r_type = ELF64_R_TYPE (rel->r_info);
1379
1380       if (r_type == R_MMIX_GNU_VTINHERIT
1381           || r_type == R_MMIX_GNU_VTENTRY)
1382         continue;
1383
1384       r_symndx = ELF64_R_SYM (rel->r_info);
1385
1386       howto = elf_mmix_howto_table + ELF64_R_TYPE (rel->r_info);
1387       h = NULL;
1388       sym = NULL;
1389       sec = NULL;
1390
1391       if (r_symndx < symtab_hdr->sh_info)
1392         {
1393           sym = local_syms + r_symndx;
1394           sec = local_sections [r_symndx];
1395           relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
1396
1397           name = bfd_elf_string_from_elf_section (input_bfd,
1398                                                   symtab_hdr->sh_link,
1399                                                   sym->st_name);
1400           if (name == NULL)
1401             name = bfd_section_name (input_bfd, sec);
1402         }
1403       else
1404         {
1405           bfd_boolean unresolved_reloc;
1406
1407           RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
1408                                    r_symndx, symtab_hdr, sym_hashes,
1409                                    h, sec, relocation,
1410                                    unresolved_reloc, undefined_signalled);
1411           name = h->root.root.string;
1412         }
1413
1414       if (sec != NULL && elf_discarded_section (sec))
1415         {
1416           /* For relocs against symbols from removed linkonce sections,
1417              or sections discarded by a linker script, we just want the
1418              section contents zeroed.  Avoid any special processing.  */
1419           _bfd_clear_contents (howto, input_bfd, contents + rel->r_offset);
1420           rel->r_info = 0;
1421           rel->r_addend = 0;
1422           continue;
1423         }
1424
1425       if (info->relocatable)
1426         {
1427           /* This is a relocatable link.  For most relocs we don't have to
1428              change anything, unless the reloc is against a section
1429              symbol, in which case we have to adjust according to where
1430              the section symbol winds up in the output section.  */
1431           if (sym != NULL && ELF_ST_TYPE (sym->st_info) == STT_SECTION)
1432             rel->r_addend += sec->output_offset;
1433
1434           /* For PUSHJ stub relocs however, we may need to change the
1435              reloc and the section contents, if the reloc doesn't reach
1436              beyond the end of the output section and previous stubs.
1437              Then we change the section contents to be a PUSHJ to the end
1438              of the input section plus stubs (we can do that without using
1439              a reloc), and then we change the reloc to be a R_MMIX_PUSHJ
1440              at the stub location.  */
1441           if (r_type == R_MMIX_PUSHJ_STUBBABLE)
1442             {
1443               /* We've already checked whether we need a stub; use that
1444                  knowledge.  */
1445               if (mmix_elf_section_data (input_section)->pjs.stub_size[pjsno]
1446                   != 0)
1447                 {
1448                   Elf_Internal_Rela relcpy;
1449
1450                   if (mmix_elf_section_data (input_section)
1451                       ->pjs.stub_size[pjsno] != MAX_PUSHJ_STUB_SIZE)
1452                     abort ();
1453
1454                   /* There's already a PUSHJ insn there, so just fill in
1455                      the offset bits to the stub.  */
1456                   if (mmix_final_link_relocate (elf_mmix_howto_table
1457                                                 + R_MMIX_ADDR19,
1458                                                 input_section,
1459                                                 contents,
1460                                                 rel->r_offset,
1461                                                 0,
1462                                                 input_section
1463                                                 ->output_section->vma
1464                                                 + input_section->output_offset
1465                                                 + size
1466                                                 + mmix_elf_section_data (input_section)
1467                                                 ->pjs.stub_offset,
1468                                                 NULL, NULL) != bfd_reloc_ok)
1469                     return FALSE;
1470
1471                   /* Put a JMP insn at the stub; it goes with the
1472                      R_MMIX_JMP reloc.  */
1473                   bfd_put_32 (output_bfd, JMP_INSN_BYTE << 24,
1474                               contents
1475                               + size
1476                               + mmix_elf_section_data (input_section)
1477                               ->pjs.stub_offset);
1478
1479                   /* Change the reloc to be at the stub, and to a full
1480                      R_MMIX_JMP reloc.  */
1481                   rel->r_info = ELF64_R_INFO (r_symndx, R_MMIX_JMP);
1482                   rel->r_offset
1483                     = (size
1484                        + mmix_elf_section_data (input_section)
1485                        ->pjs.stub_offset);
1486
1487                   mmix_elf_section_data (input_section)->pjs.stub_offset
1488                     += MAX_PUSHJ_STUB_SIZE;
1489
1490                   /* Shift this reloc to the end of the relocs to maintain
1491                      the r_offset sorted reloc order.  */
1492                   relcpy = *rel;
1493                   memmove (rel, rel + 1, (char *) relend - (char *) rel);
1494                   relend[-1] = relcpy;
1495
1496                   /* Back up one reloc, or else we'd skip the next reloc
1497                    in turn.  */
1498                   rel--;
1499                 }
1500
1501               pjsno++;
1502             }
1503           continue;
1504         }
1505
1506       r = mmix_final_link_relocate (howto, input_section,
1507                                     contents, rel->r_offset,
1508                                     rel->r_addend, relocation, name, sec);
1509
1510       if (r != bfd_reloc_ok)
1511         {
1512           bfd_boolean check_ok = TRUE;
1513           const char * msg = (const char *) NULL;
1514
1515           switch (r)
1516             {
1517             case bfd_reloc_overflow:
1518               check_ok = info->callbacks->reloc_overflow
1519                 (info, (h ? &h->root : NULL), name, howto->name,
1520                  (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
1521               break;
1522
1523             case bfd_reloc_undefined:
1524               /* We may have sent this message above.  */
1525               if (! undefined_signalled)
1526                 check_ok = info->callbacks->undefined_symbol
1527                   (info, name, input_bfd, input_section, rel->r_offset,
1528                    TRUE);
1529               undefined_signalled = TRUE;
1530               break;
1531
1532             case bfd_reloc_outofrange:
1533               msg = _("internal error: out of range error");
1534               break;
1535
1536             case bfd_reloc_notsupported:
1537               msg = _("internal error: unsupported relocation error");
1538               break;
1539
1540             case bfd_reloc_dangerous:
1541               msg = _("internal error: dangerous relocation");
1542               break;
1543
1544             default:
1545               msg = _("internal error: unknown error");
1546               break;
1547             }
1548
1549           if (msg)
1550             check_ok = info->callbacks->warning
1551               (info, msg, name, input_bfd, input_section, rel->r_offset);
1552
1553           if (! check_ok)
1554             return FALSE;
1555         }
1556     }
1557
1558   return TRUE;
1559 }
1560 \f
1561 /* Perform a single relocation.  By default we use the standard BFD
1562    routines.  A few relocs we have to do ourselves.  */
1563
1564 static bfd_reloc_status_type
1565 mmix_final_link_relocate (howto, input_section, contents,
1566                           r_offset, r_addend, relocation, symname, symsec)
1567      reloc_howto_type *howto;
1568      asection *input_section;
1569      bfd_byte *contents;
1570      bfd_vma r_offset;
1571      bfd_signed_vma r_addend;
1572      bfd_vma relocation;
1573      const char *symname;
1574      asection *symsec;
1575 {
1576   bfd_reloc_status_type r = bfd_reloc_ok;
1577   bfd_vma addr
1578     = (input_section->output_section->vma
1579        + input_section->output_offset
1580        + r_offset);
1581   bfd_signed_vma srel
1582     = (bfd_signed_vma) relocation + r_addend;
1583
1584   switch (howto->type)
1585     {
1586       /* All these are PC-relative.  */
1587     case R_MMIX_PUSHJ_STUBBABLE:
1588     case R_MMIX_PUSHJ:
1589     case R_MMIX_CBRANCH:
1590     case R_MMIX_ADDR19:
1591     case R_MMIX_GETA:
1592     case R_MMIX_ADDR27:
1593     case R_MMIX_JMP:
1594       contents += r_offset;
1595
1596       srel -= (input_section->output_section->vma
1597                + input_section->output_offset
1598                + r_offset);
1599
1600       r = mmix_elf_perform_relocation (input_section, howto, contents,
1601                                        addr, srel);
1602       break;
1603
1604     case R_MMIX_BASE_PLUS_OFFSET:
1605       if (symsec == NULL)
1606         return bfd_reloc_undefined;
1607
1608       /* Check that we're not relocating against a register symbol.  */
1609       if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1610                   MMIX_REG_CONTENTS_SECTION_NAME) == 0
1611           || strcmp (bfd_get_section_name (symsec->owner, symsec),
1612                      MMIX_REG_SECTION_NAME) == 0)
1613         {
1614           /* Note: This is separated out into two messages in order
1615              to ease the translation into other languages.  */
1616           if (symname == NULL || *symname == 0)
1617             (*_bfd_error_handler)
1618               (_("%s: base-plus-offset relocation against register symbol: (unknown) in %s"),
1619                bfd_get_filename (input_section->owner),
1620                bfd_get_section_name (symsec->owner, symsec));
1621           else
1622             (*_bfd_error_handler)
1623               (_("%s: base-plus-offset relocation against register symbol: %s in %s"),
1624                bfd_get_filename (input_section->owner), symname,
1625                bfd_get_section_name (symsec->owner, symsec));
1626           return bfd_reloc_overflow;
1627         }
1628       goto do_mmix_reloc;
1629
1630     case R_MMIX_REG_OR_BYTE:
1631     case R_MMIX_REG:
1632       /* For now, we handle these alike.  They must refer to an register
1633          symbol, which is either relative to the register section and in
1634          the range 0..255, or is in the register contents section with vma
1635          regno * 8.  */
1636
1637       /* FIXME: A better way to check for reg contents section?
1638          FIXME: Postpone section->scaling to mmix_elf_perform_relocation? */
1639       if (symsec == NULL)
1640         return bfd_reloc_undefined;
1641
1642       if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1643                   MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1644         {
1645           if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1646             {
1647               /* The bfd_reloc_outofrange return value, though intuitively
1648                  a better value, will not get us an error.  */
1649               return bfd_reloc_overflow;
1650             }
1651           srel /= 8;
1652         }
1653       else if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1654                        MMIX_REG_SECTION_NAME) == 0)
1655         {
1656           if (srel < 0 || srel > 255)
1657             /* The bfd_reloc_outofrange return value, though intuitively a
1658                better value, will not get us an error.  */
1659             return bfd_reloc_overflow;
1660         }
1661       else
1662         {
1663           /* Note: This is separated out into two messages in order
1664              to ease the translation into other languages.  */
1665           if (symname == NULL || *symname == 0)
1666             (*_bfd_error_handler)
1667               (_("%s: register relocation against non-register symbol: (unknown) in %s"),
1668                bfd_get_filename (input_section->owner),
1669                bfd_get_section_name (symsec->owner, symsec));
1670           else
1671             (*_bfd_error_handler)
1672               (_("%s: register relocation against non-register symbol: %s in %s"),
1673                bfd_get_filename (input_section->owner), symname,
1674                bfd_get_section_name (symsec->owner, symsec));
1675
1676           /* The bfd_reloc_outofrange return value, though intuitively a
1677              better value, will not get us an error.  */
1678           return bfd_reloc_overflow;
1679         }
1680     do_mmix_reloc:
1681       contents += r_offset;
1682       r = mmix_elf_perform_relocation (input_section, howto, contents,
1683                                        addr, srel);
1684       break;
1685
1686     case R_MMIX_LOCAL:
1687       /* This isn't a real relocation, it's just an assertion that the
1688          final relocation value corresponds to a local register.  We
1689          ignore the actual relocation; nothing is changed.  */
1690       {
1691         asection *regsec
1692           = bfd_get_section_by_name (input_section->output_section->owner,
1693                                      MMIX_REG_CONTENTS_SECTION_NAME);
1694         bfd_vma first_global;
1695
1696         /* Check that this is an absolute value, or a reference to the
1697            register contents section or the register (symbol) section.
1698            Absolute numbers can get here as undefined section.  Undefined
1699            symbols are signalled elsewhere, so there's no conflict in us
1700            accidentally handling it.  */
1701         if (!bfd_is_abs_section (symsec)
1702             && !bfd_is_und_section (symsec)
1703             && strcmp (bfd_get_section_name (symsec->owner, symsec),
1704                        MMIX_REG_CONTENTS_SECTION_NAME) != 0
1705             && strcmp (bfd_get_section_name (symsec->owner, symsec),
1706                        MMIX_REG_SECTION_NAME) != 0)
1707         {
1708           (*_bfd_error_handler)
1709             (_("%s: directive LOCAL valid only with a register or absolute value"),
1710              bfd_get_filename (input_section->owner));
1711
1712           return bfd_reloc_overflow;
1713         }
1714
1715       /* If we don't have a register contents section, then $255 is the
1716          first global register.  */
1717       if (regsec == NULL)
1718         first_global = 255;
1719       else
1720         {
1721           first_global = bfd_get_section_vma (abfd, regsec) / 8;
1722           if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1723                       MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1724             {
1725               if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1726                 /* The bfd_reloc_outofrange return value, though
1727                    intuitively a better value, will not get us an error.  */
1728                 return bfd_reloc_overflow;
1729               srel /= 8;
1730             }
1731         }
1732
1733         if ((bfd_vma) srel >= first_global)
1734           {
1735             /* FIXME: Better error message.  */
1736             (*_bfd_error_handler)
1737               (_("%s: LOCAL directive: Register $%ld is not a local register.  First global register is $%ld."),
1738                bfd_get_filename (input_section->owner), (long) srel, (long) first_global);
1739
1740             return bfd_reloc_overflow;
1741           }
1742       }
1743       r = bfd_reloc_ok;
1744       break;
1745
1746     default:
1747       r = _bfd_final_link_relocate (howto, input_section->owner, input_section,
1748                                     contents, r_offset,
1749                                     relocation, r_addend);
1750     }
1751
1752   return r;
1753 }
1754 \f
1755 /* Return the section that should be marked against GC for a given
1756    relocation.  */
1757
1758 static asection *
1759 mmix_elf_gc_mark_hook (asection *sec,
1760                        struct bfd_link_info *info,
1761                        Elf_Internal_Rela *rel,
1762                        struct elf_link_hash_entry *h,
1763                        Elf_Internal_Sym *sym)
1764 {
1765   if (h != NULL)
1766     switch (ELF64_R_TYPE (rel->r_info))
1767       {
1768       case R_MMIX_GNU_VTINHERIT:
1769       case R_MMIX_GNU_VTENTRY:
1770         return NULL;
1771       }
1772
1773   return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym);
1774 }
1775
1776 /* Update relocation info for a GC-excluded section.  We could supposedly
1777    perform the allocation after GC, but there's no suitable hook between
1778    GC (or section merge) and the point when all input sections must be
1779    present.  Better to waste some memory and (perhaps) a little time.  */
1780
1781 static bfd_boolean
1782 mmix_elf_gc_sweep_hook (bfd *abfd ATTRIBUTE_UNUSED,
1783                         struct bfd_link_info *info ATTRIBUTE_UNUSED,
1784                         asection *sec,
1785                         const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED)
1786 {
1787   struct bpo_reloc_section_info *bpodata
1788     = mmix_elf_section_data (sec)->bpo.reloc;
1789   asection *allocated_gregs_section;
1790
1791   /* If no bpodata here, we have nothing to do.  */
1792   if (bpodata == NULL)
1793     return TRUE;
1794
1795   allocated_gregs_section = bpodata->bpo_greg_section;
1796
1797   mmix_elf_section_data (allocated_gregs_section)->bpo.greg->n_bpo_relocs
1798     -= bpodata->n_bpo_relocs_this_section;
1799
1800   return TRUE;
1801 }
1802 \f
1803 /* Sort register relocs to come before expanding relocs.  */
1804
1805 static int
1806 mmix_elf_sort_relocs (p1, p2)
1807      const PTR p1;
1808      const PTR p2;
1809 {
1810   const Elf_Internal_Rela *r1 = (const Elf_Internal_Rela *) p1;
1811   const Elf_Internal_Rela *r2 = (const Elf_Internal_Rela *) p2;
1812   int r1_is_reg, r2_is_reg;
1813
1814   /* Sort primarily on r_offset & ~3, so relocs are done to consecutive
1815      insns.  */
1816   if ((r1->r_offset & ~(bfd_vma) 3) > (r2->r_offset & ~(bfd_vma) 3))
1817     return 1;
1818   else if ((r1->r_offset & ~(bfd_vma) 3) < (r2->r_offset & ~(bfd_vma) 3))
1819     return -1;
1820
1821   r1_is_reg
1822     = (ELF64_R_TYPE (r1->r_info) == R_MMIX_REG_OR_BYTE
1823        || ELF64_R_TYPE (r1->r_info) == R_MMIX_REG);
1824   r2_is_reg
1825     = (ELF64_R_TYPE (r2->r_info) == R_MMIX_REG_OR_BYTE
1826        || ELF64_R_TYPE (r2->r_info) == R_MMIX_REG);
1827   if (r1_is_reg != r2_is_reg)
1828     return r2_is_reg - r1_is_reg;
1829
1830   /* Neither or both are register relocs.  Then sort on full offset.  */
1831   if (r1->r_offset > r2->r_offset)
1832     return 1;
1833   else if (r1->r_offset < r2->r_offset)
1834     return -1;
1835   return 0;
1836 }
1837
1838 /* Subset of mmix_elf_check_relocs, common to ELF and mmo linking.  */
1839
1840 static bfd_boolean
1841 mmix_elf_check_common_relocs  (abfd, info, sec, relocs)
1842      bfd *abfd;
1843      struct bfd_link_info *info;
1844      asection *sec;
1845      const Elf_Internal_Rela *relocs;
1846 {
1847   bfd *bpo_greg_owner = NULL;
1848   asection *allocated_gregs_section = NULL;
1849   struct bpo_greg_section_info *gregdata = NULL;
1850   struct bpo_reloc_section_info *bpodata = NULL;
1851   const Elf_Internal_Rela *rel;
1852   const Elf_Internal_Rela *rel_end;
1853
1854   /* We currently have to abuse this COFF-specific member, since there's
1855      no target-machine-dedicated member.  There's no alternative outside
1856      the bfd_link_info struct; we can't specialize a hash-table since
1857      they're different between ELF and mmo.  */
1858   bpo_greg_owner = (bfd *) info->base_file;
1859
1860   rel_end = relocs + sec->reloc_count;
1861   for (rel = relocs; rel < rel_end; rel++)
1862     {
1863       switch (ELF64_R_TYPE (rel->r_info))
1864         {
1865           /* This relocation causes a GREG allocation.  We need to count
1866              them, and we need to create a section for them, so we need an
1867              object to fake as the owner of that section.  We can't use
1868              the ELF dynobj for this, since the ELF bits assume lots of
1869              DSO-related stuff if that member is non-NULL.  */
1870         case R_MMIX_BASE_PLUS_OFFSET:
1871           /* We don't do anything with this reloc for a relocatable link.  */
1872           if (info->relocatable)
1873             break;
1874
1875           if (bpo_greg_owner == NULL)
1876             {
1877               bpo_greg_owner = abfd;
1878               info->base_file = (PTR) bpo_greg_owner;
1879             }
1880
1881           if (allocated_gregs_section == NULL)
1882             allocated_gregs_section
1883               = bfd_get_section_by_name (bpo_greg_owner,
1884                                          MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
1885
1886           if (allocated_gregs_section == NULL)
1887             {
1888               allocated_gregs_section
1889                 = bfd_make_section_with_flags (bpo_greg_owner,
1890                                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME,
1891                                                (SEC_HAS_CONTENTS
1892                                                 | SEC_IN_MEMORY
1893                                                 | SEC_LINKER_CREATED));
1894               /* Setting both SEC_ALLOC and SEC_LOAD means the section is
1895                  treated like any other section, and we'd get errors for
1896                  address overlap with the text section.  Let's set none of
1897                  those flags, as that is what currently happens for usual
1898                  GREG allocations, and that works.  */
1899               if (allocated_gregs_section == NULL
1900                   || !bfd_set_section_alignment (bpo_greg_owner,
1901                                                  allocated_gregs_section,
1902                                                  3))
1903                 return FALSE;
1904
1905               gregdata = (struct bpo_greg_section_info *)
1906                 bfd_zalloc (bpo_greg_owner, sizeof (struct bpo_greg_section_info));
1907               if (gregdata == NULL)
1908                 return FALSE;
1909               mmix_elf_section_data (allocated_gregs_section)->bpo.greg
1910                 = gregdata;
1911             }
1912           else if (gregdata == NULL)
1913             gregdata
1914               = mmix_elf_section_data (allocated_gregs_section)->bpo.greg;
1915
1916           /* Get ourselves some auxiliary info for the BPO-relocs.  */
1917           if (bpodata == NULL)
1918             {
1919               /* No use doing a separate iteration pass to find the upper
1920                  limit - just use the number of relocs.  */
1921               bpodata = (struct bpo_reloc_section_info *)
1922                 bfd_alloc (bpo_greg_owner,
1923                            sizeof (struct bpo_reloc_section_info)
1924                            * (sec->reloc_count + 1));
1925               if (bpodata == NULL)
1926                 return FALSE;
1927               mmix_elf_section_data (sec)->bpo.reloc = bpodata;
1928               bpodata->first_base_plus_offset_reloc
1929                 = bpodata->bpo_index
1930                 = gregdata->n_max_bpo_relocs;
1931               bpodata->bpo_greg_section
1932                 = allocated_gregs_section;
1933               bpodata->n_bpo_relocs_this_section = 0;
1934             }
1935
1936           bpodata->n_bpo_relocs_this_section++;
1937           gregdata->n_max_bpo_relocs++;
1938
1939           /* We don't get another chance to set this before GC; we've not
1940              set up any hook that runs before GC.  */
1941           gregdata->n_bpo_relocs
1942             = gregdata->n_max_bpo_relocs;
1943           break;
1944
1945         case R_MMIX_PUSHJ_STUBBABLE:
1946           mmix_elf_section_data (sec)->pjs.n_pushj_relocs++;
1947           break;
1948         }
1949     }
1950
1951   /* Allocate per-reloc stub storage and initialize it to the max stub
1952      size.  */
1953   if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs != 0)
1954     {
1955       size_t i;
1956
1957       mmix_elf_section_data (sec)->pjs.stub_size
1958         = bfd_alloc (abfd, mmix_elf_section_data (sec)->pjs.n_pushj_relocs
1959                      * sizeof (mmix_elf_section_data (sec)
1960                                ->pjs.stub_size[0]));
1961       if (mmix_elf_section_data (sec)->pjs.stub_size == NULL)
1962         return FALSE;
1963
1964       for (i = 0; i < mmix_elf_section_data (sec)->pjs.n_pushj_relocs; i++)
1965         mmix_elf_section_data (sec)->pjs.stub_size[i] = MAX_PUSHJ_STUB_SIZE;
1966     }
1967
1968   return TRUE;
1969 }
1970
1971 /* Look through the relocs for a section during the first phase.  */
1972
1973 static bfd_boolean
1974 mmix_elf_check_relocs (abfd, info, sec, relocs)
1975      bfd *abfd;
1976      struct bfd_link_info *info;
1977      asection *sec;
1978      const Elf_Internal_Rela *relocs;
1979 {
1980   Elf_Internal_Shdr *symtab_hdr;
1981   struct elf_link_hash_entry **sym_hashes, **sym_hashes_end;
1982   const Elf_Internal_Rela *rel;
1983   const Elf_Internal_Rela *rel_end;
1984
1985   symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
1986   sym_hashes = elf_sym_hashes (abfd);
1987   sym_hashes_end = sym_hashes + symtab_hdr->sh_size/sizeof(Elf64_External_Sym);
1988   if (!elf_bad_symtab (abfd))
1989     sym_hashes_end -= symtab_hdr->sh_info;
1990
1991   /* First we sort the relocs so that any register relocs come before
1992      expansion-relocs to the same insn.  FIXME: Not done for mmo.  */
1993   qsort ((PTR) relocs, sec->reloc_count, sizeof (Elf_Internal_Rela),
1994          mmix_elf_sort_relocs);
1995
1996   /* Do the common part.  */
1997   if (!mmix_elf_check_common_relocs (abfd, info, sec, relocs))
1998     return FALSE;
1999
2000   if (info->relocatable)
2001     return TRUE;
2002
2003   rel_end = relocs + sec->reloc_count;
2004   for (rel = relocs; rel < rel_end; rel++)
2005     {
2006       struct elf_link_hash_entry *h;
2007       unsigned long r_symndx;
2008
2009       r_symndx = ELF64_R_SYM (rel->r_info);
2010       if (r_symndx < symtab_hdr->sh_info)
2011         h = NULL;
2012       else
2013         {
2014           h = sym_hashes[r_symndx - symtab_hdr->sh_info];
2015           while (h->root.type == bfd_link_hash_indirect
2016                  || h->root.type == bfd_link_hash_warning)
2017             h = (struct elf_link_hash_entry *) h->root.u.i.link;
2018         }
2019
2020       switch (ELF64_R_TYPE (rel->r_info))
2021         {
2022         /* This relocation describes the C++ object vtable hierarchy.
2023            Reconstruct it for later use during GC.  */
2024         case R_MMIX_GNU_VTINHERIT:
2025           if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset))
2026             return FALSE;
2027           break;
2028
2029         /* This relocation describes which C++ vtable entries are actually
2030            used.  Record for later use during GC.  */
2031         case R_MMIX_GNU_VTENTRY:
2032           if (!bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend))
2033             return FALSE;
2034           break;
2035         }
2036     }
2037
2038   return TRUE;
2039 }
2040
2041 /* Wrapper for mmix_elf_check_common_relocs, called when linking to mmo.
2042    Copied from elf_link_add_object_symbols.  */
2043
2044 bfd_boolean
2045 _bfd_mmix_check_all_relocs (abfd, info)
2046      bfd *abfd;
2047      struct bfd_link_info *info;
2048 {
2049   asection *o;
2050
2051   for (o = abfd->sections; o != NULL; o = o->next)
2052     {
2053       Elf_Internal_Rela *internal_relocs;
2054       bfd_boolean ok;
2055
2056       if ((o->flags & SEC_RELOC) == 0
2057           || o->reloc_count == 0
2058           || ((info->strip == strip_all || info->strip == strip_debugger)
2059               && (o->flags & SEC_DEBUGGING) != 0)
2060           || bfd_is_abs_section (o->output_section))
2061         continue;
2062
2063       internal_relocs
2064         = _bfd_elf_link_read_relocs (abfd, o, (PTR) NULL,
2065                                      (Elf_Internal_Rela *) NULL,
2066                                      info->keep_memory);
2067       if (internal_relocs == NULL)
2068         return FALSE;
2069
2070       ok = mmix_elf_check_common_relocs (abfd, info, o, internal_relocs);
2071
2072       if (! info->keep_memory)
2073         free (internal_relocs);
2074
2075       if (! ok)
2076         return FALSE;
2077     }
2078
2079   return TRUE;
2080 }
2081 \f
2082 /* Change symbols relative to the reg contents section to instead be to
2083    the register section, and scale them down to correspond to the register
2084    number.  */
2085
2086 static bfd_boolean
2087 mmix_elf_link_output_symbol_hook (info, name, sym, input_sec, h)
2088      struct bfd_link_info *info ATTRIBUTE_UNUSED;
2089      const char *name ATTRIBUTE_UNUSED;
2090      Elf_Internal_Sym *sym;
2091      asection *input_sec;
2092      struct elf_link_hash_entry *h ATTRIBUTE_UNUSED;
2093 {
2094   if (input_sec != NULL
2095       && input_sec->name != NULL
2096       && ELF_ST_TYPE (sym->st_info) != STT_SECTION
2097       && strcmp (input_sec->name, MMIX_REG_CONTENTS_SECTION_NAME) == 0)
2098     {
2099       sym->st_value /= 8;
2100       sym->st_shndx = SHN_REGISTER;
2101     }
2102
2103   return TRUE;
2104 }
2105
2106 /* We fake a register section that holds values that are register numbers.
2107    Having a SHN_REGISTER and register section translates better to other
2108    formats (e.g. mmo) than for example a STT_REGISTER attribute.
2109    This section faking is based on a construct in elf32-mips.c.  */
2110 static asection mmix_elf_reg_section;
2111 static asymbol mmix_elf_reg_section_symbol;
2112 static asymbol *mmix_elf_reg_section_symbol_ptr;
2113
2114 /* Handle the special section numbers that a symbol may use.  */
2115
2116 void
2117 mmix_elf_symbol_processing (abfd, asym)
2118      bfd *abfd ATTRIBUTE_UNUSED;
2119      asymbol *asym;
2120 {
2121   elf_symbol_type *elfsym;
2122
2123   elfsym = (elf_symbol_type *) asym;
2124   switch (elfsym->internal_elf_sym.st_shndx)
2125     {
2126     case SHN_REGISTER:
2127       if (mmix_elf_reg_section.name == NULL)
2128         {
2129           /* Initialize the register section.  */
2130           mmix_elf_reg_section.name = MMIX_REG_SECTION_NAME;
2131           mmix_elf_reg_section.flags = SEC_NO_FLAGS;
2132           mmix_elf_reg_section.output_section = &mmix_elf_reg_section;
2133           mmix_elf_reg_section.symbol = &mmix_elf_reg_section_symbol;
2134           mmix_elf_reg_section.symbol_ptr_ptr = &mmix_elf_reg_section_symbol_ptr;
2135           mmix_elf_reg_section_symbol.name = MMIX_REG_SECTION_NAME;
2136           mmix_elf_reg_section_symbol.flags = BSF_SECTION_SYM;
2137           mmix_elf_reg_section_symbol.section = &mmix_elf_reg_section;
2138           mmix_elf_reg_section_symbol_ptr = &mmix_elf_reg_section_symbol;
2139         }
2140       asym->section = &mmix_elf_reg_section;
2141       break;
2142
2143     default:
2144       break;
2145     }
2146 }
2147
2148 /* Given a BFD section, try to locate the corresponding ELF section
2149    index.  */
2150
2151 static bfd_boolean
2152 mmix_elf_section_from_bfd_section (abfd, sec, retval)
2153      bfd *                 abfd ATTRIBUTE_UNUSED;
2154      asection *            sec;
2155      int *                 retval;
2156 {
2157   if (strcmp (bfd_get_section_name (abfd, sec), MMIX_REG_SECTION_NAME) == 0)
2158     *retval = SHN_REGISTER;
2159   else
2160     return FALSE;
2161
2162   return TRUE;
2163 }
2164
2165 /* Hook called by the linker routine which adds symbols from an object
2166    file.  We must handle the special SHN_REGISTER section number here.
2167
2168    We also check that we only have *one* each of the section-start
2169    symbols, since otherwise having two with the same value would cause
2170    them to be "merged", but with the contents serialized.  */
2171
2172 bfd_boolean
2173 mmix_elf_add_symbol_hook (abfd, info, sym, namep, flagsp, secp, valp)
2174      bfd *abfd;
2175      struct bfd_link_info *info ATTRIBUTE_UNUSED;
2176      Elf_Internal_Sym *sym;
2177      const char **namep ATTRIBUTE_UNUSED;
2178      flagword *flagsp ATTRIBUTE_UNUSED;
2179      asection **secp;
2180      bfd_vma *valp ATTRIBUTE_UNUSED;
2181 {
2182   if (sym->st_shndx == SHN_REGISTER)
2183     {
2184       *secp = bfd_make_section_old_way (abfd, MMIX_REG_SECTION_NAME);
2185       (*secp)->flags |= SEC_LINKER_CREATED;
2186     }
2187   else if ((*namep)[0] == '_' && (*namep)[1] == '_' && (*namep)[2] == '.'
2188            && CONST_STRNEQ (*namep, MMIX_LOC_SECTION_START_SYMBOL_PREFIX))
2189     {
2190       /* See if we have another one.  */
2191       struct bfd_link_hash_entry *h = bfd_link_hash_lookup (info->hash,
2192                                                             *namep,
2193                                                             FALSE,
2194                                                             FALSE,
2195                                                             FALSE);
2196
2197       if (h != NULL && h->type != bfd_link_hash_undefined)
2198         {
2199           /* How do we get the asymbol (or really: the filename) from h?
2200              h->u.def.section->owner is NULL.  */
2201           ((*_bfd_error_handler)
2202            (_("%s: Error: multiple definition of `%s'; start of %s is set in a earlier linked file\n"),
2203             bfd_get_filename (abfd), *namep,
2204             *namep + strlen (MMIX_LOC_SECTION_START_SYMBOL_PREFIX)));
2205            bfd_set_error (bfd_error_bad_value);
2206            return FALSE;
2207         }
2208     }
2209
2210   return TRUE;
2211 }
2212
2213 /* We consider symbols matching "L.*:[0-9]+" to be local symbols.  */
2214
2215 bfd_boolean
2216 mmix_elf_is_local_label_name (abfd, name)
2217      bfd *abfd;
2218      const char *name;
2219 {
2220   const char *colpos;
2221   int digits;
2222
2223   /* Also include the default local-label definition.  */
2224   if (_bfd_elf_is_local_label_name (abfd, name))
2225     return TRUE;
2226
2227   if (*name != 'L')
2228     return FALSE;
2229
2230   /* If there's no ":", or more than one, it's not a local symbol.  */
2231   colpos = strchr (name, ':');
2232   if (colpos == NULL || strchr (colpos + 1, ':') != NULL)
2233     return FALSE;
2234
2235   /* Check that there are remaining characters and that they are digits.  */
2236   if (colpos[1] == 0)
2237     return FALSE;
2238
2239   digits = strspn (colpos + 1, "0123456789");
2240   return digits != 0 && colpos[1 + digits] == 0;
2241 }
2242
2243 /* We get rid of the register section here.  */
2244
2245 bfd_boolean
2246 mmix_elf_final_link (abfd, info)
2247      bfd *abfd;
2248      struct bfd_link_info *info;
2249 {
2250   /* We never output a register section, though we create one for
2251      temporary measures.  Check that nobody entered contents into it.  */
2252   asection *reg_section;
2253
2254   reg_section = bfd_get_section_by_name (abfd, MMIX_REG_SECTION_NAME);
2255
2256   if (reg_section != NULL)
2257     {
2258       /* FIXME: Pass error state gracefully.  */
2259       if (bfd_get_section_flags (abfd, reg_section) & SEC_HAS_CONTENTS)
2260         _bfd_abort (__FILE__, __LINE__, _("Register section has contents\n"));
2261
2262       /* Really remove the section, if it hasn't already been done.  */
2263       if (!bfd_section_removed_from_list (abfd, reg_section))
2264         {
2265           bfd_section_list_remove (abfd, reg_section);
2266           --abfd->section_count;
2267         }
2268     }
2269
2270   if (! bfd_elf_final_link (abfd, info))
2271     return FALSE;
2272
2273   /* Since this section is marked SEC_LINKER_CREATED, it isn't output by
2274      the regular linker machinery.  We do it here, like other targets with
2275      special sections.  */
2276   if (info->base_file != NULL)
2277     {
2278       asection *greg_section
2279         = bfd_get_section_by_name ((bfd *) info->base_file,
2280                                    MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2281       if (!bfd_set_section_contents (abfd,
2282                                      greg_section->output_section,
2283                                      greg_section->contents,
2284                                      (file_ptr) greg_section->output_offset,
2285                                      greg_section->size))
2286         return FALSE;
2287     }
2288   return TRUE;
2289 }
2290
2291 /* We need to include the maximum size of PUSHJ-stubs in the initial
2292    section size.  This is expected to shrink during linker relaxation.  */
2293
2294 static void
2295 mmix_set_relaxable_size (abfd, sec, ptr)
2296      bfd *abfd ATTRIBUTE_UNUSED;
2297      asection *sec;
2298      void *ptr;
2299 {
2300   struct bfd_link_info *info = ptr;
2301
2302   /* Make sure we only do this for section where we know we want this,
2303      otherwise we might end up resetting the size of COMMONs.  */
2304   if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0)
2305     return;
2306
2307   sec->rawsize = sec->size;
2308   sec->size += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2309                 * MAX_PUSHJ_STUB_SIZE);
2310
2311   /* For use in relocatable link, we start with a max stubs size.  See
2312      mmix_elf_relax_section.  */
2313   if (info->relocatable && sec->output_section)
2314     mmix_elf_section_data (sec->output_section)->pjs.stubs_size_sum
2315       += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2316           * MAX_PUSHJ_STUB_SIZE);
2317 }
2318
2319 /* Initialize stuff for the linker-generated GREGs to match
2320    R_MMIX_BASE_PLUS_OFFSET relocs seen by the linker.  */
2321
2322 bfd_boolean
2323 _bfd_mmix_before_linker_allocation (abfd, info)
2324      bfd *abfd ATTRIBUTE_UNUSED;
2325      struct bfd_link_info *info;
2326 {
2327   asection *bpo_gregs_section;
2328   bfd *bpo_greg_owner;
2329   struct bpo_greg_section_info *gregdata;
2330   size_t n_gregs;
2331   bfd_vma gregs_size;
2332   size_t i;
2333   size_t *bpo_reloc_indexes;
2334   bfd *ibfd;
2335
2336   /* Set the initial size of sections.  */
2337   for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link_next)
2338     bfd_map_over_sections (ibfd, mmix_set_relaxable_size, info);
2339
2340   /* The bpo_greg_owner bfd is supposed to have been set by
2341      mmix_elf_check_relocs when the first R_MMIX_BASE_PLUS_OFFSET is seen.
2342      If there is no such object, there was no R_MMIX_BASE_PLUS_OFFSET.  */
2343   bpo_greg_owner = (bfd *) info->base_file;
2344   if (bpo_greg_owner == NULL)
2345     return TRUE;
2346
2347   bpo_gregs_section
2348     = bfd_get_section_by_name (bpo_greg_owner,
2349                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2350
2351   if (bpo_gregs_section == NULL)
2352     return TRUE;
2353
2354   /* We use the target-data handle in the ELF section data.  */
2355   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2356   if (gregdata == NULL)
2357     return FALSE;
2358
2359   n_gregs = gregdata->n_bpo_relocs;
2360   gregdata->n_allocated_bpo_gregs = n_gregs;
2361
2362   /* When this reaches zero during relaxation, all entries have been
2363      filled in and the size of the linker gregs can be calculated.  */
2364   gregdata->n_remaining_bpo_relocs_this_relaxation_round = n_gregs;
2365
2366   /* Set the zeroth-order estimate for the GREGs size.  */
2367   gregs_size = n_gregs * 8;
2368
2369   if (!bfd_set_section_size (bpo_greg_owner, bpo_gregs_section, gregs_size))
2370     return FALSE;
2371
2372   /* Allocate and set up the GREG arrays.  They're filled in at relaxation
2373      time.  Note that we must use the max number ever noted for the array,
2374      since the index numbers were created before GC.  */
2375   gregdata->reloc_request
2376     = bfd_zalloc (bpo_greg_owner,
2377                   sizeof (struct bpo_reloc_request)
2378                   * gregdata->n_max_bpo_relocs);
2379
2380   gregdata->bpo_reloc_indexes
2381     = bpo_reloc_indexes
2382     = bfd_alloc (bpo_greg_owner,
2383                  gregdata->n_max_bpo_relocs
2384                  * sizeof (size_t));
2385   if (bpo_reloc_indexes == NULL)
2386     return FALSE;
2387
2388   /* The default order is an identity mapping.  */
2389   for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2390     {
2391       bpo_reloc_indexes[i] = i;
2392       gregdata->reloc_request[i].bpo_reloc_no = i;
2393     }
2394
2395   return TRUE;
2396 }
2397 \f
2398 /* Fill in contents in the linker allocated gregs.  Everything is
2399    calculated at this point; we just move the contents into place here.  */
2400
2401 bfd_boolean
2402 _bfd_mmix_after_linker_allocation (abfd, link_info)
2403      bfd *abfd ATTRIBUTE_UNUSED;
2404      struct bfd_link_info *link_info;
2405 {
2406   asection *bpo_gregs_section;
2407   bfd *bpo_greg_owner;
2408   struct bpo_greg_section_info *gregdata;
2409   size_t n_gregs;
2410   size_t i, j;
2411   size_t lastreg;
2412   bfd_byte *contents;
2413
2414   /* The bpo_greg_owner bfd is supposed to have been set by mmix_elf_check_relocs
2415      when the first R_MMIX_BASE_PLUS_OFFSET is seen.  If there is no such
2416      object, there was no R_MMIX_BASE_PLUS_OFFSET.  */
2417   bpo_greg_owner = (bfd *) link_info->base_file;
2418   if (bpo_greg_owner == NULL)
2419     return TRUE;
2420
2421   bpo_gregs_section
2422     = bfd_get_section_by_name (bpo_greg_owner,
2423                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2424
2425   /* This can't happen without DSO handling.  When DSOs are handled
2426      without any R_MMIX_BASE_PLUS_OFFSET seen, there will be no such
2427      section.  */
2428   if (bpo_gregs_section == NULL)
2429     return TRUE;
2430
2431   /* We use the target-data handle in the ELF section data.  */
2432
2433   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2434   if (gregdata == NULL)
2435     return FALSE;
2436
2437   n_gregs = gregdata->n_allocated_bpo_gregs;
2438
2439   bpo_gregs_section->contents
2440     = contents = bfd_alloc (bpo_greg_owner, bpo_gregs_section->size);
2441   if (contents == NULL)
2442     return FALSE;
2443
2444   /* Sanity check: If these numbers mismatch, some relocation has not been
2445      accounted for and the rest of gregdata is probably inconsistent.
2446      It's a bug, but it's more helpful to identify it than segfaulting
2447      below.  */
2448   if (gregdata->n_remaining_bpo_relocs_this_relaxation_round
2449       != gregdata->n_bpo_relocs)
2450     {
2451       (*_bfd_error_handler)
2452         (_("Internal inconsistency: remaining %u != max %u.\n\
2453   Please report this bug."),
2454          gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2455          gregdata->n_bpo_relocs);
2456       return FALSE;
2457     }
2458
2459   for (lastreg = 255, i = 0, j = 0; j < n_gregs; i++)
2460     if (gregdata->reloc_request[i].regindex != lastreg)
2461       {
2462         bfd_put_64 (bpo_greg_owner, gregdata->reloc_request[i].value,
2463                     contents + j * 8);
2464         lastreg = gregdata->reloc_request[i].regindex;
2465         j++;
2466       }
2467
2468   return TRUE;
2469 }
2470
2471 /* Sort valid relocs to come before non-valid relocs, then on increasing
2472    value.  */
2473
2474 static int
2475 bpo_reloc_request_sort_fn (p1, p2)
2476      const PTR p1;
2477      const PTR p2;
2478 {
2479   const struct bpo_reloc_request *r1 = (const struct bpo_reloc_request *) p1;
2480   const struct bpo_reloc_request *r2 = (const struct bpo_reloc_request *) p2;
2481
2482   /* Primary function is validity; non-valid relocs sorted after valid
2483      ones.  */
2484   if (r1->valid != r2->valid)
2485     return r2->valid - r1->valid;
2486
2487   /* Then sort on value.  Don't simplify and return just the difference of
2488      the values: the upper bits of the 64-bit value would be truncated on
2489      a host with 32-bit ints.  */
2490   if (r1->value != r2->value)
2491     return r1->value > r2->value ? 1 : -1;
2492
2493   /* As a last re-sort, use the relocation number, so we get a stable
2494      sort.  The *addresses* aren't stable since items are swapped during
2495      sorting.  It depends on the qsort implementation if this actually
2496      happens.  */
2497   return r1->bpo_reloc_no > r2->bpo_reloc_no
2498     ? 1 : (r1->bpo_reloc_no < r2->bpo_reloc_no ? -1 : 0);
2499 }
2500
2501 /* For debug use only.  Dumps the global register allocations resulting
2502    from base-plus-offset relocs.  */
2503
2504 void
2505 mmix_dump_bpo_gregs (link_info, pf)
2506      struct bfd_link_info *link_info;
2507      bfd_error_handler_type pf;
2508 {
2509   bfd *bpo_greg_owner;
2510   asection *bpo_gregs_section;
2511   struct bpo_greg_section_info *gregdata;
2512   unsigned int i;
2513
2514   if (link_info == NULL || link_info->base_file == NULL)
2515     return;
2516
2517   bpo_greg_owner = (bfd *) link_info->base_file;
2518
2519   bpo_gregs_section
2520     = bfd_get_section_by_name (bpo_greg_owner,
2521                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2522
2523   if (bpo_gregs_section == NULL)
2524     return;
2525
2526   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2527   if (gregdata == NULL)
2528     return;
2529
2530   if (pf == NULL)
2531     pf = _bfd_error_handler;
2532
2533   /* These format strings are not translated.  They are for debug purposes
2534      only and never displayed to an end user.  Should they escape, we
2535      surely want them in original.  */
2536   (*pf) (" n_bpo_relocs: %u\n n_max_bpo_relocs: %u\n n_remain...round: %u\n\
2537  n_allocated_bpo_gregs: %u\n", gregdata->n_bpo_relocs,
2538      gregdata->n_max_bpo_relocs,
2539      gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2540      gregdata->n_allocated_bpo_gregs);
2541
2542   if (gregdata->reloc_request)
2543     for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2544       (*pf) ("%4u (%4u)/%4u#%u: 0x%08lx%08lx  r: %3u o: %3u\n",
2545              i,
2546              (gregdata->bpo_reloc_indexes != NULL
2547               ? gregdata->bpo_reloc_indexes[i] : (size_t) -1),
2548              gregdata->reloc_request[i].bpo_reloc_no,
2549              gregdata->reloc_request[i].valid,
2550
2551              (unsigned long) (gregdata->reloc_request[i].value >> 32),
2552              (unsigned long) gregdata->reloc_request[i].value,
2553              gregdata->reloc_request[i].regindex,
2554              gregdata->reloc_request[i].offset);
2555 }
2556
2557 /* This links all R_MMIX_BASE_PLUS_OFFSET relocs into a special array, and
2558    when the last such reloc is done, an index-array is sorted according to
2559    the values and iterated over to produce register numbers (indexed by 0
2560    from the first allocated register number) and offsets for use in real
2561    relocation.
2562
2563    PUSHJ stub accounting is also done here.
2564
2565    Symbol- and reloc-reading infrastructure copied from elf-m10200.c.  */
2566
2567 static bfd_boolean
2568 mmix_elf_relax_section (abfd, sec, link_info, again)
2569      bfd *abfd;
2570      asection *sec;
2571      struct bfd_link_info *link_info;
2572      bfd_boolean *again;
2573 {
2574   Elf_Internal_Shdr *symtab_hdr;
2575   Elf_Internal_Rela *internal_relocs;
2576   Elf_Internal_Rela *irel, *irelend;
2577   asection *bpo_gregs_section = NULL;
2578   struct bpo_greg_section_info *gregdata;
2579   struct bpo_reloc_section_info *bpodata
2580     = mmix_elf_section_data (sec)->bpo.reloc;
2581   /* The initialization is to quiet compiler warnings.  The value is to
2582      spot a missing actual initialization.  */
2583   size_t bpono = (size_t) -1;
2584   size_t pjsno = 0;
2585   bfd *bpo_greg_owner;
2586   Elf_Internal_Sym *isymbuf = NULL;
2587   bfd_size_type size = sec->rawsize ? sec->rawsize : sec->size;
2588
2589   mmix_elf_section_data (sec)->pjs.stubs_size_sum = 0;
2590
2591   /* Assume nothing changes.  */
2592   *again = FALSE;
2593
2594   /* We don't have to do anything if this section does not have relocs, or
2595      if this is not a code section.  */
2596   if ((sec->flags & SEC_RELOC) == 0
2597       || sec->reloc_count == 0
2598       || (sec->flags & SEC_CODE) == 0
2599       || (sec->flags & SEC_LINKER_CREATED) != 0
2600       /* If no R_MMIX_BASE_PLUS_OFFSET relocs and no PUSHJ-stub relocs,
2601          then nothing to do.  */
2602       || (bpodata == NULL
2603           && mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0))
2604     return TRUE;
2605
2606   symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
2607
2608   bpo_greg_owner = (bfd *) link_info->base_file;
2609
2610   if (bpodata != NULL)
2611     {
2612       bpo_gregs_section = bpodata->bpo_greg_section;
2613       gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2614       bpono = bpodata->first_base_plus_offset_reloc;
2615     }
2616   else
2617     gregdata = NULL;
2618
2619   /* Get a copy of the native relocations.  */
2620   internal_relocs
2621     = _bfd_elf_link_read_relocs (abfd, sec, (PTR) NULL,
2622                                  (Elf_Internal_Rela *) NULL,
2623                                  link_info->keep_memory);
2624   if (internal_relocs == NULL)
2625     goto error_return;
2626
2627   /* Walk through them looking for relaxing opportunities.  */
2628   irelend = internal_relocs + sec->reloc_count;
2629   for (irel = internal_relocs; irel < irelend; irel++)
2630     {
2631       bfd_vma symval;
2632       struct elf_link_hash_entry *h = NULL;
2633
2634       /* We only process two relocs.  */
2635       if (ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_BASE_PLUS_OFFSET
2636           && ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_PUSHJ_STUBBABLE)
2637         continue;
2638
2639       /* We process relocs in a distinctly different way when this is a
2640          relocatable link (for one, we don't look at symbols), so we avoid
2641          mixing its code with that for the "normal" relaxation.  */
2642       if (link_info->relocatable)
2643         {
2644           /* The only transformation in a relocatable link is to generate
2645              a full stub at the location of the stub calculated for the
2646              input section, if the relocated stub location, the end of the
2647              output section plus earlier stubs, cannot be reached.  Thus
2648              relocatable linking can only lead to worse code, but it still
2649              works.  */
2650           if (ELF64_R_TYPE (irel->r_info) == R_MMIX_PUSHJ_STUBBABLE)
2651             {
2652               /* If we can reach the end of the output-section and beyond
2653                  any current stubs, then we don't need a stub for this
2654                  reloc.  The relaxed order of output stub allocation may
2655                  not exactly match the straightforward order, so we always
2656                  assume presence of output stubs, which will allow
2657                  relaxation only on relocations indifferent to the
2658                  presence of output stub allocations for other relocations
2659                  and thus the order of output stub allocation.  */
2660               if (bfd_check_overflow (complain_overflow_signed,
2661                                       19,
2662                                       0,
2663                                       bfd_arch_bits_per_address (abfd),
2664                                       /* Output-stub location.  */
2665                                       sec->output_section->rawsize
2666                                       + (mmix_elf_section_data (sec
2667                                                                ->output_section)
2668                                          ->pjs.stubs_size_sum)
2669                                       /* Location of this PUSHJ reloc.  */
2670                                       - (sec->output_offset + irel->r_offset)
2671                                       /* Don't count *this* stub twice.  */
2672                                       - (mmix_elf_section_data (sec)
2673                                          ->pjs.stub_size[pjsno]
2674                                          + MAX_PUSHJ_STUB_SIZE))
2675                   == bfd_reloc_ok)
2676                 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2677
2678               mmix_elf_section_data (sec)->pjs.stubs_size_sum
2679                 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2680
2681               pjsno++;
2682             }
2683
2684           continue;
2685         }
2686
2687       /* Get the value of the symbol referred to by the reloc.  */
2688       if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info)
2689         {
2690           /* A local symbol.  */
2691           Elf_Internal_Sym *isym;
2692           asection *sym_sec;
2693
2694           /* Read this BFD's local symbols if we haven't already.  */
2695           if (isymbuf == NULL)
2696             {
2697               isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
2698               if (isymbuf == NULL)
2699                 isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
2700                                                 symtab_hdr->sh_info, 0,
2701                                                 NULL, NULL, NULL);
2702               if (isymbuf == 0)
2703                 goto error_return;
2704             }
2705
2706           isym = isymbuf + ELF64_R_SYM (irel->r_info);
2707           if (isym->st_shndx == SHN_UNDEF)
2708             sym_sec = bfd_und_section_ptr;
2709           else if (isym->st_shndx == SHN_ABS)
2710             sym_sec = bfd_abs_section_ptr;
2711           else if (isym->st_shndx == SHN_COMMON)
2712             sym_sec = bfd_com_section_ptr;
2713           else
2714             sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
2715           symval = (isym->st_value
2716                     + sym_sec->output_section->vma
2717                     + sym_sec->output_offset);
2718         }
2719       else
2720         {
2721           unsigned long indx;
2722
2723           /* An external symbol.  */
2724           indx = ELF64_R_SYM (irel->r_info) - symtab_hdr->sh_info;
2725           h = elf_sym_hashes (abfd)[indx];
2726           BFD_ASSERT (h != NULL);
2727           if (h->root.type != bfd_link_hash_defined
2728               && h->root.type != bfd_link_hash_defweak)
2729             {
2730               /* This appears to be a reference to an undefined symbol.  Just
2731                  ignore it--it will be caught by the regular reloc processing.
2732                  We need to keep BPO reloc accounting consistent, though
2733                  else we'll abort instead of emitting an error message.  */
2734               if (ELF64_R_TYPE (irel->r_info) == R_MMIX_BASE_PLUS_OFFSET
2735                   && gregdata != NULL)
2736                 {
2737                   gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2738                   bpono++;
2739                 }
2740               continue;
2741             }
2742
2743           symval = (h->root.u.def.value
2744                     + h->root.u.def.section->output_section->vma
2745                     + h->root.u.def.section->output_offset);
2746         }
2747
2748       if (ELF64_R_TYPE (irel->r_info) == (int) R_MMIX_PUSHJ_STUBBABLE)
2749         {
2750           bfd_vma value = symval + irel->r_addend;
2751           bfd_vma dot
2752             = (sec->output_section->vma
2753                + sec->output_offset
2754                + irel->r_offset);
2755           bfd_vma stubaddr
2756             = (sec->output_section->vma
2757                + sec->output_offset
2758                + size
2759                + mmix_elf_section_data (sec)->pjs.stubs_size_sum);
2760
2761           if ((value & 3) == 0
2762               && bfd_check_overflow (complain_overflow_signed,
2763                                      19,
2764                                      0,
2765                                      bfd_arch_bits_per_address (abfd),
2766                                      value - dot
2767                                      - (value > dot
2768                                         ? mmix_elf_section_data (sec)
2769                                         ->pjs.stub_size[pjsno]
2770                                         : 0))
2771               == bfd_reloc_ok)
2772             /* If the reloc fits, no stub is needed.  */
2773             mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2774           else
2775             /* Maybe we can get away with just a JMP insn?  */
2776             if ((value & 3) == 0
2777                 && bfd_check_overflow (complain_overflow_signed,
2778                                        27,
2779                                        0,
2780                                        bfd_arch_bits_per_address (abfd),
2781                                        value - stubaddr
2782                                        - (value > dot
2783                                           ? mmix_elf_section_data (sec)
2784                                           ->pjs.stub_size[pjsno] - 4
2785                                           : 0))
2786                 == bfd_reloc_ok)
2787               /* Yep, account for a stub consisting of a single JMP insn.  */
2788               mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 4;
2789           else
2790             /* Nope, go for the full insn stub.  It doesn't seem useful to
2791                emit the intermediate sizes; those will only be useful for
2792                a >64M program assuming contiguous code.  */
2793             mmix_elf_section_data (sec)->pjs.stub_size[pjsno]
2794               = MAX_PUSHJ_STUB_SIZE;
2795
2796           mmix_elf_section_data (sec)->pjs.stubs_size_sum
2797             += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2798           pjsno++;
2799           continue;
2800         }
2801
2802       /* We're looking at a R_MMIX_BASE_PLUS_OFFSET reloc.  */
2803
2804       gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono]].value
2805         = symval + irel->r_addend;
2806       gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono++]].valid = TRUE;
2807       gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2808     }
2809
2810   /* Check if that was the last BPO-reloc.  If so, sort the values and
2811      calculate how many registers we need to cover them.  Set the size of
2812      the linker gregs, and if the number of registers changed, indicate
2813      that we need to relax some more because we have more work to do.  */
2814   if (gregdata != NULL
2815       && gregdata->n_remaining_bpo_relocs_this_relaxation_round == 0)
2816     {
2817       size_t i;
2818       bfd_vma prev_base;
2819       size_t regindex;
2820
2821       /* First, reset the remaining relocs for the next round.  */
2822       gregdata->n_remaining_bpo_relocs_this_relaxation_round
2823         = gregdata->n_bpo_relocs;
2824
2825       qsort ((PTR) gregdata->reloc_request,
2826              gregdata->n_max_bpo_relocs,
2827              sizeof (struct bpo_reloc_request),
2828              bpo_reloc_request_sort_fn);
2829
2830       /* Recalculate indexes.  When we find a change (however unlikely
2831          after the initial iteration), we know we need to relax again,
2832          since items in the GREG-array are sorted by increasing value and
2833          stored in the relaxation phase.  */
2834       for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2835         if (gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2836             != i)
2837           {
2838             gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2839               = i;
2840             *again = TRUE;
2841           }
2842
2843       /* Allocate register numbers (indexing from 0).  Stop at the first
2844          non-valid reloc.  */
2845       for (i = 0, regindex = 0, prev_base = gregdata->reloc_request[0].value;
2846            i < gregdata->n_bpo_relocs;
2847            i++)
2848         {
2849           if (gregdata->reloc_request[i].value > prev_base + 255)
2850             {
2851               regindex++;
2852               prev_base = gregdata->reloc_request[i].value;
2853             }
2854           gregdata->reloc_request[i].regindex = regindex;
2855           gregdata->reloc_request[i].offset
2856             = gregdata->reloc_request[i].value - prev_base;
2857         }
2858
2859       /* If it's not the same as the last time, we need to relax again,
2860          because the size of the section has changed.  I'm not sure we
2861          actually need to do any adjustments since the shrinking happens
2862          at the start of this section, but better safe than sorry.  */
2863       if (gregdata->n_allocated_bpo_gregs != regindex + 1)
2864         {
2865           gregdata->n_allocated_bpo_gregs = regindex + 1;
2866           *again = TRUE;
2867         }
2868
2869       bpo_gregs_section->size = (regindex + 1) * 8;
2870     }
2871
2872   if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2873     {
2874       if (! link_info->keep_memory)
2875         free (isymbuf);
2876       else
2877         {
2878           /* Cache the symbols for elf_link_input_bfd.  */
2879           symtab_hdr->contents = (unsigned char *) isymbuf;
2880         }
2881     }
2882
2883   if (internal_relocs != NULL
2884       && elf_section_data (sec)->relocs != internal_relocs)
2885     free (internal_relocs);
2886
2887   if (sec->size < size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2888     abort ();
2889
2890   if (sec->size > size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2891     {
2892       sec->size = size + mmix_elf_section_data (sec)->pjs.stubs_size_sum;
2893       *again = TRUE;
2894     }
2895
2896   return TRUE;
2897
2898  error_return:
2899   if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2900     free (isymbuf);
2901   if (internal_relocs != NULL
2902       && elf_section_data (sec)->relocs != internal_relocs)
2903     free (internal_relocs);
2904   return FALSE;
2905 }
2906 \f
2907 #define ELF_ARCH                bfd_arch_mmix
2908 #define ELF_MACHINE_CODE        EM_MMIX
2909
2910 /* According to mmix-doc page 36 (paragraph 45), this should be (1LL << 48LL).
2911    However, that's too much for something somewhere in the linker part of
2912    BFD; perhaps the start-address has to be a non-zero multiple of this
2913    number, or larger than this number.  The symptom is that the linker
2914    complains: "warning: allocated section `.text' not in segment".  We
2915    settle for 64k; the page-size used in examples is 8k.
2916    #define ELF_MAXPAGESIZE 0x10000
2917
2918    Unfortunately, this causes excessive padding in the supposedly small
2919    for-education programs that are the expected usage (where people would
2920    inspect output).  We stick to 256 bytes just to have *some* default
2921    alignment.  */
2922 #define ELF_MAXPAGESIZE 0x100
2923
2924 #define TARGET_BIG_SYM          bfd_elf64_mmix_vec
2925 #define TARGET_BIG_NAME         "elf64-mmix"
2926
2927 #define elf_info_to_howto_rel           NULL
2928 #define elf_info_to_howto               mmix_info_to_howto_rela
2929 #define elf_backend_relocate_section    mmix_elf_relocate_section
2930 #define elf_backend_gc_mark_hook        mmix_elf_gc_mark_hook
2931 #define elf_backend_gc_sweep_hook       mmix_elf_gc_sweep_hook
2932
2933 #define elf_backend_link_output_symbol_hook \
2934         mmix_elf_link_output_symbol_hook
2935 #define elf_backend_add_symbol_hook     mmix_elf_add_symbol_hook
2936
2937 #define elf_backend_check_relocs        mmix_elf_check_relocs
2938 #define elf_backend_symbol_processing   mmix_elf_symbol_processing
2939 #define elf_backend_omit_section_dynsym \
2940   ((bfd_boolean (*) (bfd *, struct bfd_link_info *, asection *)) bfd_true)
2941
2942 #define bfd_elf64_bfd_is_local_label_name \
2943         mmix_elf_is_local_label_name
2944
2945 #define elf_backend_may_use_rel_p       0
2946 #define elf_backend_may_use_rela_p      1
2947 #define elf_backend_default_use_rela_p  1
2948
2949 #define elf_backend_can_gc_sections     1
2950 #define elf_backend_section_from_bfd_section \
2951         mmix_elf_section_from_bfd_section
2952
2953 #define bfd_elf64_new_section_hook      mmix_elf_new_section_hook
2954 #define bfd_elf64_bfd_final_link        mmix_elf_final_link
2955 #define bfd_elf64_bfd_relax_section     mmix_elf_relax_section
2956
2957 #include "elf64-target.h"