1 /* MMIX-specific support for 64-bit ELF.
2 Copyright (C) 2001-2016 Free Software Foundation, Inc.
3 Contributed by Hans-Peter Nilsson <hp@bitrange.com>
5 This file is part of BFD, the Binary File Descriptor library.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
23 /* No specific ABI or "processor-specific supplement" defined. */
26 - "Traditional" linker relaxation (shrinking whole sections).
27 - Merge reloc stubs jumping to same location.
28 - GETA stub relaxation (call a stub for out of range new
29 R_MMIX_GETA_STUBBABLE). */
36 #include "opcode/mmix.h"
38 #define MINUS_ONE (((bfd_vma) 0) - 1)
40 #define MAX_PUSHJ_STUB_SIZE (5 * 4)
42 /* Put these everywhere in new code. */
44 _bfd_abort (__FILE__, __LINE__, \
45 "Internal: Non-debugged code (test-case missing)")
48 _bfd_abort (__FILE__, __LINE__, \
51 struct _mmix_elf_section_data
53 struct bfd_elf_section_data elf;
56 struct bpo_reloc_section_info *reloc;
57 struct bpo_greg_section_info *greg;
60 struct pushj_stub_info
62 /* Maximum number of stubs needed for this section. */
63 bfd_size_type n_pushj_relocs;
65 /* Size of stubs after a mmix_elf_relax_section round. */
66 bfd_size_type stubs_size_sum;
68 /* Per-reloc stubs_size_sum information. The stubs_size_sum member is the sum
69 of these. Allocated in mmix_elf_check_common_relocs. */
70 bfd_size_type *stub_size;
72 /* Offset of next stub during relocation. Somewhat redundant with the
73 above: error coverage is easier and we don't have to reset the
74 stubs_size_sum for relocation. */
75 bfd_size_type stub_offset;
78 /* Whether there has been a warning that this section could not be
79 linked due to a specific cause. FIXME: a way to access the
80 linker info or output section, then stuff the limiter guard
82 bfd_boolean has_warned_bpo;
83 bfd_boolean has_warned_pushj;
86 #define mmix_elf_section_data(sec) \
87 ((struct _mmix_elf_section_data *) elf_section_data (sec))
89 /* For each section containing a base-plus-offset (BPO) reloc, we attach
90 this struct as mmix_elf_section_data (section)->bpo, which is otherwise
92 struct bpo_reloc_section_info
94 /* The base is 1; this is the first number in this section. */
95 size_t first_base_plus_offset_reloc;
97 /* Number of BPO-relocs in this section. */
98 size_t n_bpo_relocs_this_section;
100 /* Running index, used at relocation time. */
103 /* We don't have access to the bfd_link_info struct in
104 mmix_final_link_relocate. What we really want to get at is the
105 global single struct greg_relocation, so we stash it here. */
106 asection *bpo_greg_section;
109 /* Helper struct (in global context) for the one below.
110 There's one of these created for every BPO reloc. */
111 struct bpo_reloc_request
115 /* Valid after relaxation. The base is 0; the first register number
116 must be added. The offset is in range 0..255. */
120 /* The order number for this BPO reloc, corresponding to the order in
121 which BPO relocs were found. Used to create an index after reloc
122 requests are sorted. */
125 /* Set when the value is computed. Better than coding "guard values"
126 into the other members. Is FALSE only for BPO relocs in a GC:ed
131 /* We attach this as mmix_elf_section_data (sec)->bpo in the linker-allocated
132 greg contents section (MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME),
133 which is linked into the register contents section
134 (MMIX_REG_CONTENTS_SECTION_NAME). This section is created by the
135 linker; using the same hook as for usual with BPO relocs does not
137 struct bpo_greg_section_info
139 /* After GC, this reflects the number of remaining, non-excluded
143 /* This is the number of allocated bpo_reloc_requests; the size of
144 sorted_indexes. Valid after the check.*relocs functions are called
145 for all incoming sections. It includes the number of BPO relocs in
146 sections that were GC:ed. */
147 size_t n_max_bpo_relocs;
149 /* A counter used to find out when to fold the BPO gregs, since we
150 don't have a single "after-relaxation" hook. */
151 size_t n_remaining_bpo_relocs_this_relaxation_round;
153 /* The number of linker-allocated GREGs resulting from BPO relocs.
154 This is an approximation after _bfd_mmix_before_linker_allocation
155 and supposedly accurate after mmix_elf_relax_section is called for
156 all incoming non-collected sections. */
157 size_t n_allocated_bpo_gregs;
159 /* Index into reloc_request[], sorted on increasing "value", secondary
160 by increasing index for strict sorting order. */
161 size_t *bpo_reloc_indexes;
163 /* An array of all relocations, with the "value" member filled in by
164 the relaxation function. */
165 struct bpo_reloc_request *reloc_request;
169 extern bfd_boolean mmix_elf_final_link (bfd *, struct bfd_link_info *);
171 extern void mmix_elf_symbol_processing (bfd *, asymbol *);
173 /* Only intended to be called from a debugger. */
174 extern void mmix_dump_bpo_gregs
175 (struct bfd_link_info *, bfd_error_handler_type);
178 mmix_set_relaxable_size (bfd *, asection *, void *);
179 static bfd_reloc_status_type
180 mmix_elf_reloc (bfd *, arelent *, asymbol *, void *,
181 asection *, bfd *, char **);
182 static bfd_reloc_status_type
183 mmix_final_link_relocate (reloc_howto_type *, asection *, bfd_byte *, bfd_vma,
184 bfd_signed_vma, bfd_vma, const char *, asection *,
188 /* Watch out: this currently needs to have elements with the same index as
189 their R_MMIX_ number. */
190 static reloc_howto_type elf_mmix_howto_table[] =
192 /* This reloc does nothing. */
193 HOWTO (R_MMIX_NONE, /* type */
195 3, /* size (0 = byte, 1 = short, 2 = long) */
197 FALSE, /* pc_relative */
199 complain_overflow_dont, /* complain_on_overflow */
200 bfd_elf_generic_reloc, /* special_function */
201 "R_MMIX_NONE", /* name */
202 FALSE, /* partial_inplace */
205 FALSE), /* pcrel_offset */
207 /* An 8 bit absolute relocation. */
208 HOWTO (R_MMIX_8, /* type */
210 0, /* size (0 = byte, 1 = short, 2 = long) */
212 FALSE, /* pc_relative */
214 complain_overflow_bitfield, /* complain_on_overflow */
215 bfd_elf_generic_reloc, /* special_function */
216 "R_MMIX_8", /* name */
217 FALSE, /* partial_inplace */
220 FALSE), /* pcrel_offset */
222 /* An 16 bit absolute relocation. */
223 HOWTO (R_MMIX_16, /* type */
225 1, /* size (0 = byte, 1 = short, 2 = long) */
227 FALSE, /* pc_relative */
229 complain_overflow_bitfield, /* complain_on_overflow */
230 bfd_elf_generic_reloc, /* special_function */
231 "R_MMIX_16", /* name */
232 FALSE, /* partial_inplace */
234 0xffff, /* dst_mask */
235 FALSE), /* pcrel_offset */
237 /* An 24 bit absolute relocation. */
238 HOWTO (R_MMIX_24, /* type */
240 2, /* size (0 = byte, 1 = short, 2 = long) */
242 FALSE, /* pc_relative */
244 complain_overflow_bitfield, /* complain_on_overflow */
245 bfd_elf_generic_reloc, /* special_function */
246 "R_MMIX_24", /* name */
247 FALSE, /* partial_inplace */
248 ~0xffffff, /* src_mask */
249 0xffffff, /* dst_mask */
250 FALSE), /* pcrel_offset */
252 /* A 32 bit absolute relocation. */
253 HOWTO (R_MMIX_32, /* type */
255 2, /* size (0 = byte, 1 = short, 2 = long) */
257 FALSE, /* pc_relative */
259 complain_overflow_bitfield, /* complain_on_overflow */
260 bfd_elf_generic_reloc, /* special_function */
261 "R_MMIX_32", /* name */
262 FALSE, /* partial_inplace */
264 0xffffffff, /* dst_mask */
265 FALSE), /* pcrel_offset */
267 /* 64 bit relocation. */
268 HOWTO (R_MMIX_64, /* type */
270 4, /* size (0 = byte, 1 = short, 2 = long) */
272 FALSE, /* pc_relative */
274 complain_overflow_bitfield, /* complain_on_overflow */
275 bfd_elf_generic_reloc, /* special_function */
276 "R_MMIX_64", /* name */
277 FALSE, /* partial_inplace */
279 MINUS_ONE, /* dst_mask */
280 FALSE), /* pcrel_offset */
282 /* An 8 bit PC-relative relocation. */
283 HOWTO (R_MMIX_PC_8, /* type */
285 0, /* size (0 = byte, 1 = short, 2 = long) */
287 TRUE, /* pc_relative */
289 complain_overflow_bitfield, /* complain_on_overflow */
290 bfd_elf_generic_reloc, /* special_function */
291 "R_MMIX_PC_8", /* name */
292 FALSE, /* partial_inplace */
295 TRUE), /* pcrel_offset */
297 /* An 16 bit PC-relative relocation. */
298 HOWTO (R_MMIX_PC_16, /* type */
300 1, /* size (0 = byte, 1 = short, 2 = long) */
302 TRUE, /* pc_relative */
304 complain_overflow_bitfield, /* complain_on_overflow */
305 bfd_elf_generic_reloc, /* special_function */
306 "R_MMIX_PC_16", /* name */
307 FALSE, /* partial_inplace */
309 0xffff, /* dst_mask */
310 TRUE), /* pcrel_offset */
312 /* An 24 bit PC-relative relocation. */
313 HOWTO (R_MMIX_PC_24, /* type */
315 2, /* size (0 = byte, 1 = short, 2 = long) */
317 TRUE, /* pc_relative */
319 complain_overflow_bitfield, /* complain_on_overflow */
320 bfd_elf_generic_reloc, /* special_function */
321 "R_MMIX_PC_24", /* name */
322 FALSE, /* partial_inplace */
323 ~0xffffff, /* src_mask */
324 0xffffff, /* dst_mask */
325 TRUE), /* pcrel_offset */
327 /* A 32 bit absolute PC-relative relocation. */
328 HOWTO (R_MMIX_PC_32, /* type */
330 2, /* size (0 = byte, 1 = short, 2 = long) */
332 TRUE, /* pc_relative */
334 complain_overflow_bitfield, /* complain_on_overflow */
335 bfd_elf_generic_reloc, /* special_function */
336 "R_MMIX_PC_32", /* name */
337 FALSE, /* partial_inplace */
339 0xffffffff, /* dst_mask */
340 TRUE), /* pcrel_offset */
342 /* 64 bit PC-relative relocation. */
343 HOWTO (R_MMIX_PC_64, /* type */
345 4, /* size (0 = byte, 1 = short, 2 = long) */
347 TRUE, /* pc_relative */
349 complain_overflow_bitfield, /* complain_on_overflow */
350 bfd_elf_generic_reloc, /* special_function */
351 "R_MMIX_PC_64", /* name */
352 FALSE, /* partial_inplace */
354 MINUS_ONE, /* dst_mask */
355 TRUE), /* pcrel_offset */
357 /* GNU extension to record C++ vtable hierarchy. */
358 HOWTO (R_MMIX_GNU_VTINHERIT, /* type */
360 0, /* size (0 = byte, 1 = short, 2 = long) */
362 FALSE, /* pc_relative */
364 complain_overflow_dont, /* complain_on_overflow */
365 NULL, /* special_function */
366 "R_MMIX_GNU_VTINHERIT", /* name */
367 FALSE, /* partial_inplace */
370 TRUE), /* pcrel_offset */
372 /* GNU extension to record C++ vtable member usage. */
373 HOWTO (R_MMIX_GNU_VTENTRY, /* type */
375 0, /* size (0 = byte, 1 = short, 2 = long) */
377 FALSE, /* pc_relative */
379 complain_overflow_dont, /* complain_on_overflow */
380 _bfd_elf_rel_vtable_reloc_fn, /* special_function */
381 "R_MMIX_GNU_VTENTRY", /* name */
382 FALSE, /* partial_inplace */
385 FALSE), /* pcrel_offset */
387 /* The GETA relocation is supposed to get any address that could
388 possibly be reached by the GETA instruction. It can silently expand
389 to get a 64-bit operand, but will complain if any of the two least
390 significant bits are set. The howto members reflect a simple GETA. */
391 HOWTO (R_MMIX_GETA, /* type */
393 2, /* size (0 = byte, 1 = short, 2 = long) */
395 TRUE, /* pc_relative */
397 complain_overflow_signed, /* complain_on_overflow */
398 mmix_elf_reloc, /* special_function */
399 "R_MMIX_GETA", /* name */
400 FALSE, /* partial_inplace */
401 ~0x0100ffff, /* src_mask */
402 0x0100ffff, /* dst_mask */
403 TRUE), /* pcrel_offset */
405 HOWTO (R_MMIX_GETA_1, /* type */
407 2, /* size (0 = byte, 1 = short, 2 = long) */
409 TRUE, /* pc_relative */
411 complain_overflow_signed, /* complain_on_overflow */
412 mmix_elf_reloc, /* special_function */
413 "R_MMIX_GETA_1", /* name */
414 FALSE, /* partial_inplace */
415 ~0x0100ffff, /* src_mask */
416 0x0100ffff, /* dst_mask */
417 TRUE), /* pcrel_offset */
419 HOWTO (R_MMIX_GETA_2, /* type */
421 2, /* size (0 = byte, 1 = short, 2 = long) */
423 TRUE, /* pc_relative */
425 complain_overflow_signed, /* complain_on_overflow */
426 mmix_elf_reloc, /* special_function */
427 "R_MMIX_GETA_2", /* name */
428 FALSE, /* partial_inplace */
429 ~0x0100ffff, /* src_mask */
430 0x0100ffff, /* dst_mask */
431 TRUE), /* pcrel_offset */
433 HOWTO (R_MMIX_GETA_3, /* type */
435 2, /* size (0 = byte, 1 = short, 2 = long) */
437 TRUE, /* pc_relative */
439 complain_overflow_signed, /* complain_on_overflow */
440 mmix_elf_reloc, /* special_function */
441 "R_MMIX_GETA_3", /* name */
442 FALSE, /* partial_inplace */
443 ~0x0100ffff, /* src_mask */
444 0x0100ffff, /* dst_mask */
445 TRUE), /* pcrel_offset */
447 /* The conditional branches are supposed to reach any (code) address.
448 It can silently expand to a 64-bit operand, but will emit an error if
449 any of the two least significant bits are set. The howto members
450 reflect a simple branch. */
451 HOWTO (R_MMIX_CBRANCH, /* type */
453 2, /* size (0 = byte, 1 = short, 2 = long) */
455 TRUE, /* pc_relative */
457 complain_overflow_signed, /* complain_on_overflow */
458 mmix_elf_reloc, /* special_function */
459 "R_MMIX_CBRANCH", /* name */
460 FALSE, /* partial_inplace */
461 ~0x0100ffff, /* src_mask */
462 0x0100ffff, /* dst_mask */
463 TRUE), /* pcrel_offset */
465 HOWTO (R_MMIX_CBRANCH_J, /* type */
467 2, /* size (0 = byte, 1 = short, 2 = long) */
469 TRUE, /* pc_relative */
471 complain_overflow_signed, /* complain_on_overflow */
472 mmix_elf_reloc, /* special_function */
473 "R_MMIX_CBRANCH_J", /* name */
474 FALSE, /* partial_inplace */
475 ~0x0100ffff, /* src_mask */
476 0x0100ffff, /* dst_mask */
477 TRUE), /* pcrel_offset */
479 HOWTO (R_MMIX_CBRANCH_1, /* type */
481 2, /* size (0 = byte, 1 = short, 2 = long) */
483 TRUE, /* pc_relative */
485 complain_overflow_signed, /* complain_on_overflow */
486 mmix_elf_reloc, /* special_function */
487 "R_MMIX_CBRANCH_1", /* name */
488 FALSE, /* partial_inplace */
489 ~0x0100ffff, /* src_mask */
490 0x0100ffff, /* dst_mask */
491 TRUE), /* pcrel_offset */
493 HOWTO (R_MMIX_CBRANCH_2, /* type */
495 2, /* size (0 = byte, 1 = short, 2 = long) */
497 TRUE, /* pc_relative */
499 complain_overflow_signed, /* complain_on_overflow */
500 mmix_elf_reloc, /* special_function */
501 "R_MMIX_CBRANCH_2", /* name */
502 FALSE, /* partial_inplace */
503 ~0x0100ffff, /* src_mask */
504 0x0100ffff, /* dst_mask */
505 TRUE), /* pcrel_offset */
507 HOWTO (R_MMIX_CBRANCH_3, /* type */
509 2, /* size (0 = byte, 1 = short, 2 = long) */
511 TRUE, /* pc_relative */
513 complain_overflow_signed, /* complain_on_overflow */
514 mmix_elf_reloc, /* special_function */
515 "R_MMIX_CBRANCH_3", /* name */
516 FALSE, /* partial_inplace */
517 ~0x0100ffff, /* src_mask */
518 0x0100ffff, /* dst_mask */
519 TRUE), /* pcrel_offset */
521 /* The PUSHJ instruction can reach any (code) address, as long as it's
522 the beginning of a function (no usable restriction). It can silently
523 expand to a 64-bit operand, but will emit an error if any of the two
524 least significant bits are set. It can also expand into a call to a
525 stub; see R_MMIX_PUSHJ_STUBBABLE. The howto members reflect a simple
527 HOWTO (R_MMIX_PUSHJ, /* type */
529 2, /* size (0 = byte, 1 = short, 2 = long) */
531 TRUE, /* pc_relative */
533 complain_overflow_signed, /* complain_on_overflow */
534 mmix_elf_reloc, /* special_function */
535 "R_MMIX_PUSHJ", /* name */
536 FALSE, /* partial_inplace */
537 ~0x0100ffff, /* src_mask */
538 0x0100ffff, /* dst_mask */
539 TRUE), /* pcrel_offset */
541 HOWTO (R_MMIX_PUSHJ_1, /* type */
543 2, /* size (0 = byte, 1 = short, 2 = long) */
545 TRUE, /* pc_relative */
547 complain_overflow_signed, /* complain_on_overflow */
548 mmix_elf_reloc, /* special_function */
549 "R_MMIX_PUSHJ_1", /* name */
550 FALSE, /* partial_inplace */
551 ~0x0100ffff, /* src_mask */
552 0x0100ffff, /* dst_mask */
553 TRUE), /* pcrel_offset */
555 HOWTO (R_MMIX_PUSHJ_2, /* type */
557 2, /* size (0 = byte, 1 = short, 2 = long) */
559 TRUE, /* pc_relative */
561 complain_overflow_signed, /* complain_on_overflow */
562 mmix_elf_reloc, /* special_function */
563 "R_MMIX_PUSHJ_2", /* name */
564 FALSE, /* partial_inplace */
565 ~0x0100ffff, /* src_mask */
566 0x0100ffff, /* dst_mask */
567 TRUE), /* pcrel_offset */
569 HOWTO (R_MMIX_PUSHJ_3, /* type */
571 2, /* size (0 = byte, 1 = short, 2 = long) */
573 TRUE, /* pc_relative */
575 complain_overflow_signed, /* complain_on_overflow */
576 mmix_elf_reloc, /* special_function */
577 "R_MMIX_PUSHJ_3", /* name */
578 FALSE, /* partial_inplace */
579 ~0x0100ffff, /* src_mask */
580 0x0100ffff, /* dst_mask */
581 TRUE), /* pcrel_offset */
583 /* A JMP is supposed to reach any (code) address. By itself, it can
584 reach +-64M; the expansion can reach all 64 bits. Note that the 64M
585 limit is soon reached if you link the program in wildly different
586 memory segments. The howto members reflect a trivial JMP. */
587 HOWTO (R_MMIX_JMP, /* type */
589 2, /* size (0 = byte, 1 = short, 2 = long) */
591 TRUE, /* pc_relative */
593 complain_overflow_signed, /* complain_on_overflow */
594 mmix_elf_reloc, /* special_function */
595 "R_MMIX_JMP", /* name */
596 FALSE, /* partial_inplace */
597 ~0x1ffffff, /* src_mask */
598 0x1ffffff, /* dst_mask */
599 TRUE), /* pcrel_offset */
601 HOWTO (R_MMIX_JMP_1, /* type */
603 2, /* size (0 = byte, 1 = short, 2 = long) */
605 TRUE, /* pc_relative */
607 complain_overflow_signed, /* complain_on_overflow */
608 mmix_elf_reloc, /* special_function */
609 "R_MMIX_JMP_1", /* name */
610 FALSE, /* partial_inplace */
611 ~0x1ffffff, /* src_mask */
612 0x1ffffff, /* dst_mask */
613 TRUE), /* pcrel_offset */
615 HOWTO (R_MMIX_JMP_2, /* type */
617 2, /* size (0 = byte, 1 = short, 2 = long) */
619 TRUE, /* pc_relative */
621 complain_overflow_signed, /* complain_on_overflow */
622 mmix_elf_reloc, /* special_function */
623 "R_MMIX_JMP_2", /* name */
624 FALSE, /* partial_inplace */
625 ~0x1ffffff, /* src_mask */
626 0x1ffffff, /* dst_mask */
627 TRUE), /* pcrel_offset */
629 HOWTO (R_MMIX_JMP_3, /* type */
631 2, /* size (0 = byte, 1 = short, 2 = long) */
633 TRUE, /* pc_relative */
635 complain_overflow_signed, /* complain_on_overflow */
636 mmix_elf_reloc, /* special_function */
637 "R_MMIX_JMP_3", /* name */
638 FALSE, /* partial_inplace */
639 ~0x1ffffff, /* src_mask */
640 0x1ffffff, /* dst_mask */
641 TRUE), /* pcrel_offset */
643 /* When we don't emit link-time-relaxable code from the assembler, or
644 when relaxation has done all it can do, these relocs are used. For
645 GETA/PUSHJ/branches. */
646 HOWTO (R_MMIX_ADDR19, /* type */
648 2, /* size (0 = byte, 1 = short, 2 = long) */
650 TRUE, /* pc_relative */
652 complain_overflow_signed, /* complain_on_overflow */
653 mmix_elf_reloc, /* special_function */
654 "R_MMIX_ADDR19", /* name */
655 FALSE, /* partial_inplace */
656 ~0x0100ffff, /* src_mask */
657 0x0100ffff, /* dst_mask */
658 TRUE), /* pcrel_offset */
661 HOWTO (R_MMIX_ADDR27, /* type */
663 2, /* size (0 = byte, 1 = short, 2 = long) */
665 TRUE, /* pc_relative */
667 complain_overflow_signed, /* complain_on_overflow */
668 mmix_elf_reloc, /* special_function */
669 "R_MMIX_ADDR27", /* name */
670 FALSE, /* partial_inplace */
671 ~0x1ffffff, /* src_mask */
672 0x1ffffff, /* dst_mask */
673 TRUE), /* pcrel_offset */
675 /* A general register or the value 0..255. If a value, then the
676 instruction (offset -3) needs adjusting. */
677 HOWTO (R_MMIX_REG_OR_BYTE, /* type */
679 1, /* size (0 = byte, 1 = short, 2 = long) */
681 FALSE, /* pc_relative */
683 complain_overflow_bitfield, /* complain_on_overflow */
684 mmix_elf_reloc, /* special_function */
685 "R_MMIX_REG_OR_BYTE", /* name */
686 FALSE, /* partial_inplace */
689 FALSE), /* pcrel_offset */
691 /* A general register. */
692 HOWTO (R_MMIX_REG, /* type */
694 1, /* size (0 = byte, 1 = short, 2 = long) */
696 FALSE, /* pc_relative */
698 complain_overflow_bitfield, /* complain_on_overflow */
699 mmix_elf_reloc, /* special_function */
700 "R_MMIX_REG", /* name */
701 FALSE, /* partial_inplace */
704 FALSE), /* pcrel_offset */
706 /* A register plus an index, corresponding to the relocation expression.
707 The sizes must correspond to the valid range of the expression, while
708 the bitmasks correspond to what we store in the image. */
709 HOWTO (R_MMIX_BASE_PLUS_OFFSET, /* type */
711 4, /* size (0 = byte, 1 = short, 2 = long) */
713 FALSE, /* pc_relative */
715 complain_overflow_bitfield, /* complain_on_overflow */
716 mmix_elf_reloc, /* special_function */
717 "R_MMIX_BASE_PLUS_OFFSET", /* name */
718 FALSE, /* partial_inplace */
720 0xffff, /* dst_mask */
721 FALSE), /* pcrel_offset */
723 /* A "magic" relocation for a LOCAL expression, asserting that the
724 expression is less than the number of global registers. No actual
725 modification of the contents is done. Implementing this as a
726 relocation was less intrusive than e.g. putting such expressions in a
727 section to discard *after* relocation. */
728 HOWTO (R_MMIX_LOCAL, /* type */
730 0, /* size (0 = byte, 1 = short, 2 = long) */
732 FALSE, /* pc_relative */
734 complain_overflow_dont, /* complain_on_overflow */
735 mmix_elf_reloc, /* special_function */
736 "R_MMIX_LOCAL", /* name */
737 FALSE, /* partial_inplace */
740 FALSE), /* pcrel_offset */
742 HOWTO (R_MMIX_PUSHJ_STUBBABLE, /* type */
744 2, /* size (0 = byte, 1 = short, 2 = long) */
746 TRUE, /* pc_relative */
748 complain_overflow_signed, /* complain_on_overflow */
749 mmix_elf_reloc, /* special_function */
750 "R_MMIX_PUSHJ_STUBBABLE", /* name */
751 FALSE, /* partial_inplace */
752 ~0x0100ffff, /* src_mask */
753 0x0100ffff, /* dst_mask */
754 TRUE) /* pcrel_offset */
758 /* Map BFD reloc types to MMIX ELF reloc types. */
760 struct mmix_reloc_map
762 bfd_reloc_code_real_type bfd_reloc_val;
763 enum elf_mmix_reloc_type elf_reloc_val;
767 static const struct mmix_reloc_map mmix_reloc_map[] =
769 {BFD_RELOC_NONE, R_MMIX_NONE},
770 {BFD_RELOC_8, R_MMIX_8},
771 {BFD_RELOC_16, R_MMIX_16},
772 {BFD_RELOC_24, R_MMIX_24},
773 {BFD_RELOC_32, R_MMIX_32},
774 {BFD_RELOC_64, R_MMIX_64},
775 {BFD_RELOC_8_PCREL, R_MMIX_PC_8},
776 {BFD_RELOC_16_PCREL, R_MMIX_PC_16},
777 {BFD_RELOC_24_PCREL, R_MMIX_PC_24},
778 {BFD_RELOC_32_PCREL, R_MMIX_PC_32},
779 {BFD_RELOC_64_PCREL, R_MMIX_PC_64},
780 {BFD_RELOC_VTABLE_INHERIT, R_MMIX_GNU_VTINHERIT},
781 {BFD_RELOC_VTABLE_ENTRY, R_MMIX_GNU_VTENTRY},
782 {BFD_RELOC_MMIX_GETA, R_MMIX_GETA},
783 {BFD_RELOC_MMIX_CBRANCH, R_MMIX_CBRANCH},
784 {BFD_RELOC_MMIX_PUSHJ, R_MMIX_PUSHJ},
785 {BFD_RELOC_MMIX_JMP, R_MMIX_JMP},
786 {BFD_RELOC_MMIX_ADDR19, R_MMIX_ADDR19},
787 {BFD_RELOC_MMIX_ADDR27, R_MMIX_ADDR27},
788 {BFD_RELOC_MMIX_REG_OR_BYTE, R_MMIX_REG_OR_BYTE},
789 {BFD_RELOC_MMIX_REG, R_MMIX_REG},
790 {BFD_RELOC_MMIX_BASE_PLUS_OFFSET, R_MMIX_BASE_PLUS_OFFSET},
791 {BFD_RELOC_MMIX_LOCAL, R_MMIX_LOCAL},
792 {BFD_RELOC_MMIX_PUSHJ_STUBBABLE, R_MMIX_PUSHJ_STUBBABLE}
795 static reloc_howto_type *
796 bfd_elf64_bfd_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
797 bfd_reloc_code_real_type code)
802 i < sizeof (mmix_reloc_map) / sizeof (mmix_reloc_map[0]);
805 if (mmix_reloc_map[i].bfd_reloc_val == code)
806 return &elf_mmix_howto_table[mmix_reloc_map[i].elf_reloc_val];
812 static reloc_howto_type *
813 bfd_elf64_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
819 i < sizeof (elf_mmix_howto_table) / sizeof (elf_mmix_howto_table[0]);
821 if (elf_mmix_howto_table[i].name != NULL
822 && strcasecmp (elf_mmix_howto_table[i].name, r_name) == 0)
823 return &elf_mmix_howto_table[i];
829 mmix_elf_new_section_hook (bfd *abfd, asection *sec)
831 if (!sec->used_by_bfd)
833 struct _mmix_elf_section_data *sdata;
834 bfd_size_type amt = sizeof (*sdata);
836 sdata = bfd_zalloc (abfd, amt);
839 sec->used_by_bfd = sdata;
842 return _bfd_elf_new_section_hook (abfd, sec);
846 /* This function performs the actual bitfiddling and sanity check for a
847 final relocation. Each relocation gets its *worst*-case expansion
848 in size when it arrives here; any reduction in size should have been
849 caught in linker relaxation earlier. When we get here, the relocation
850 looks like the smallest instruction with SWYM:s (nop:s) appended to the
851 max size. We fill in those nop:s.
853 R_MMIX_GETA: (FIXME: Relaxation should break this up in 1, 2, 3 tetra)
857 INCML $N,(foo >> 16) & 0xffff
858 INCMH $N,(foo >> 32) & 0xffff
859 INCH $N,(foo >> 48) & 0xffff
861 R_MMIX_CBRANCH: (FIXME: Relaxation should break this up, but
862 condbranches needing relaxation might be rare enough to not be
873 R_MMIX_PUSHJ: (FIXME: Relaxation...)
882 R_MMIX_JMP: (FIXME: Relaxation...)
891 R_MMIX_ADDR19 and R_MMIX_ADDR27 are just filled in. */
893 static bfd_reloc_status_type
894 mmix_elf_perform_relocation (asection *isec, reloc_howto_type *howto,
895 void *datap, bfd_vma addr, bfd_vma value,
896 char **error_message)
898 bfd *abfd = isec->owner;
899 bfd_reloc_status_type flag = bfd_reloc_ok;
900 bfd_reloc_status_type r;
904 /* The worst case bits are all similar SETL/INCML/INCMH/INCH sequences.
905 We handle the differences here and the common sequence later. */
910 reg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
912 /* We change to an absolute value. */
918 int in1 = bfd_get_16 (abfd, (bfd_byte *) datap) << 16;
920 /* Invert the condition and prediction bit, and set the offset
921 to five instructions ahead.
923 We *can* do better if we want to. If the branch is found to be
924 within limits, we could leave the branch as is; there'll just
925 be a bunch of NOP:s after it. But we shouldn't see this
926 sequence often enough that it's worth doing it. */
929 (((in1 ^ ((PRED_INV_BIT | COND_INV_BIT) << 24)) & ~0xffff)
933 /* Put a "GO $255,$255,0" after the common sequence. */
935 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) | 0xffff00,
936 (bfd_byte *) datap + 20);
938 /* Common sequence starts at offset 4. */
941 /* We change to an absolute value. */
946 case R_MMIX_PUSHJ_STUBBABLE:
947 /* If the address fits, we're fine. */
949 /* Note rightshift 0; see R_MMIX_JMP case below. */
950 && (r = bfd_check_overflow (complain_overflow_signed,
953 bfd_arch_bits_per_address (abfd),
954 value)) == bfd_reloc_ok)
955 goto pcrel_mmix_reloc_fits;
958 bfd_size_type size = isec->rawsize ? isec->rawsize : isec->size;
960 /* We have the bytes at the PUSHJ insn and need to get the
961 position for the stub. There's supposed to be room allocated
963 bfd_byte *stubcontents
964 = ((bfd_byte *) datap
965 - (addr - (isec->output_section->vma + isec->output_offset))
967 + mmix_elf_section_data (isec)->pjs.stub_offset);
970 if (mmix_elf_section_data (isec)->pjs.n_pushj_relocs == 0)
972 /* This shouldn't happen when linking to ELF or mmo, so
973 this is an attempt to link to "binary", right? We
974 can't access the output bfd, so we can't verify that
975 assumption. We only know that the critical
976 mmix_elf_check_common_relocs has not been called,
977 which happens when the output format is different
978 from the input format (and is not mmo). */
979 if (! mmix_elf_section_data (isec)->has_warned_pushj)
981 /* For the first such error per input section, produce
982 a verbose message. */
984 = _("invalid input relocation when producing"
985 " non-ELF, non-mmo format output."
986 "\n Please use the objcopy program to convert from"
988 "\n or assemble using"
989 " \"-no-expand\" (for gcc, \"-Wa,-no-expand\"");
990 mmix_elf_section_data (isec)->has_warned_pushj = TRUE;
991 return bfd_reloc_dangerous;
994 /* For subsequent errors, return this one, which is
995 rate-limited but looks a little bit different,
996 hopefully without affecting user-friendliness. */
997 return bfd_reloc_overflow;
1000 /* The address doesn't fit, so redirect the PUSHJ to the
1001 location of the stub. */
1002 r = mmix_elf_perform_relocation (isec,
1003 &elf_mmix_howto_table
1007 isec->output_section->vma
1008 + isec->output_offset
1010 + (mmix_elf_section_data (isec)
1014 if (r != bfd_reloc_ok)
1018 = (isec->output_section->vma
1019 + isec->output_offset
1021 + mmix_elf_section_data (isec)->pjs.stub_offset);
1023 /* We generate a simple JMP if that suffices, else the whole 5
1025 if (bfd_check_overflow (complain_overflow_signed,
1026 elf_mmix_howto_table[R_MMIX_ADDR27].bitsize,
1028 bfd_arch_bits_per_address (abfd),
1029 addr + value - stubaddr) == bfd_reloc_ok)
1031 bfd_put_32 (abfd, JMP_INSN_BYTE << 24, stubcontents);
1032 r = mmix_elf_perform_relocation (isec,
1033 &elf_mmix_howto_table
1037 value + addr - stubaddr,
1039 mmix_elf_section_data (isec)->pjs.stub_offset += 4;
1041 if (size + mmix_elf_section_data (isec)->pjs.stub_offset
1049 /* Put a "GO $255,0" after the common sequence. */
1051 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1052 | 0xff00, (bfd_byte *) stubcontents + 16);
1054 /* Prepare for the general code to set the first part of the
1057 datap = stubcontents;
1058 mmix_elf_section_data (isec)->pjs.stub_offset
1059 += MAX_PUSHJ_STUB_SIZE;
1066 int inreg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
1068 /* Put a "PUSHGO $N,$255,0" after the common sequence. */
1070 ((PUSHGO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1073 (bfd_byte *) datap + 16);
1075 /* We change to an absolute value. */
1081 /* This one is a little special. If we get here on a non-relaxing
1082 link, and the destination is actually in range, we don't need to
1084 If so, we fall through to the bit-fiddling relocs.
1086 FIXME: bfd_check_overflow seems broken; the relocation is
1087 rightshifted before testing, so supply a zero rightshift. */
1089 if (! ((value & 3) == 0
1090 && (r = bfd_check_overflow (complain_overflow_signed,
1093 bfd_arch_bits_per_address (abfd),
1094 value)) == bfd_reloc_ok))
1096 /* If the relocation doesn't fit in a JMP, we let the NOP:s be
1097 modified below, and put a "GO $255,$255,0" after the
1098 address-loading sequence. */
1100 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1102 (bfd_byte *) datap + 16);
1104 /* We change to an absolute value. */
1111 pcrel_mmix_reloc_fits:
1112 /* These must be in range, or else we emit an error. */
1113 if ((value & 3) == 0
1114 /* Note rightshift 0; see above. */
1115 && (r = bfd_check_overflow (complain_overflow_signed,
1118 bfd_arch_bits_per_address (abfd),
1119 value)) == bfd_reloc_ok)
1122 = bfd_get_32 (abfd, (bfd_byte *) datap);
1125 if ((bfd_signed_vma) value < 0)
1128 value += (1 << (howto->bitsize - 1));
1136 (in1 & howto->src_mask)
1138 | (value & howto->dst_mask),
1139 (bfd_byte *) datap);
1141 return bfd_reloc_ok;
1144 return bfd_reloc_overflow;
1146 case R_MMIX_BASE_PLUS_OFFSET:
1148 struct bpo_reloc_section_info *bpodata
1149 = mmix_elf_section_data (isec)->bpo.reloc;
1150 asection *bpo_greg_section;
1151 struct bpo_greg_section_info *gregdata;
1154 if (bpodata == NULL)
1156 /* This shouldn't happen when linking to ELF or mmo, so
1157 this is an attempt to link to "binary", right? We
1158 can't access the output bfd, so we can't verify that
1159 assumption. We only know that the critical
1160 mmix_elf_check_common_relocs has not been called, which
1161 happens when the output format is different from the
1162 input format (and is not mmo). */
1163 if (! mmix_elf_section_data (isec)->has_warned_bpo)
1165 /* For the first such error per input section, produce
1166 a verbose message. */
1168 = _("invalid input relocation when producing"
1169 " non-ELF, non-mmo format output."
1170 "\n Please use the objcopy program to convert from"
1172 "\n or compile using the gcc-option"
1173 " \"-mno-base-addresses\".");
1174 mmix_elf_section_data (isec)->has_warned_bpo = TRUE;
1175 return bfd_reloc_dangerous;
1178 /* For subsequent errors, return this one, which is
1179 rate-limited but looks a little bit different,
1180 hopefully without affecting user-friendliness. */
1181 return bfd_reloc_overflow;
1184 bpo_greg_section = bpodata->bpo_greg_section;
1185 gregdata = mmix_elf_section_data (bpo_greg_section)->bpo.greg;
1186 bpo_index = gregdata->bpo_reloc_indexes[bpodata->bpo_index++];
1188 /* A consistency check: The value we now have in "relocation" must
1189 be the same as the value we stored for that relocation. It
1190 doesn't cost much, so can be left in at all times. */
1191 if (value != gregdata->reloc_request[bpo_index].value)
1193 (*_bfd_error_handler)
1194 (_("%s: Internal inconsistency error for value for\n\
1195 linker-allocated global register: linked: 0x%lx%08lx != relaxed: 0x%lx%08lx\n"),
1196 bfd_get_filename (isec->owner),
1197 (unsigned long) (value >> 32), (unsigned long) value,
1198 (unsigned long) (gregdata->reloc_request[bpo_index].value
1200 (unsigned long) gregdata->reloc_request[bpo_index].value);
1201 bfd_set_error (bfd_error_bad_value);
1202 return bfd_reloc_overflow;
1205 /* Then store the register number and offset for that register
1206 into datap and datap + 1 respectively. */
1208 gregdata->reloc_request[bpo_index].regindex
1209 + bpo_greg_section->output_section->vma / 8,
1212 gregdata->reloc_request[bpo_index].offset,
1213 ((unsigned char *) datap) + 1);
1214 return bfd_reloc_ok;
1217 case R_MMIX_REG_OR_BYTE:
1220 return bfd_reloc_overflow;
1221 bfd_put_8 (abfd, value, datap);
1222 return bfd_reloc_ok;
1225 BAD_CASE (howto->type);
1228 /* This code adds the common SETL/INCML/INCMH/INCH worst-case
1231 /* Lowest two bits must be 0. We return bfd_reloc_overflow for
1232 everything that looks strange. */
1234 flag = bfd_reloc_overflow;
1237 (SETL_INSN_BYTE << 24) | (value & 0xffff) | (reg << 16),
1238 (bfd_byte *) datap + offs);
1240 (INCML_INSN_BYTE << 24) | ((value >> 16) & 0xffff) | (reg << 16),
1241 (bfd_byte *) datap + offs + 4);
1243 (INCMH_INSN_BYTE << 24) | ((value >> 32) & 0xffff) | (reg << 16),
1244 (bfd_byte *) datap + offs + 8);
1246 (INCH_INSN_BYTE << 24) | ((value >> 48) & 0xffff) | (reg << 16),
1247 (bfd_byte *) datap + offs + 12);
1252 /* Set the howto pointer for an MMIX ELF reloc (type RELA). */
1255 mmix_info_to_howto_rela (bfd *abfd ATTRIBUTE_UNUSED,
1257 Elf_Internal_Rela *dst)
1259 unsigned int r_type;
1261 r_type = ELF64_R_TYPE (dst->r_info);
1262 if (r_type >= (unsigned int) R_MMIX_max)
1264 _bfd_error_handler (_("%B: invalid MMIX reloc number: %d"), abfd, r_type);
1267 cache_ptr->howto = &elf_mmix_howto_table[r_type];
1270 /* Any MMIX-specific relocation gets here at assembly time or when linking
1271 to other formats (such as mmo); this is the relocation function from
1272 the reloc_table. We don't get here for final pure ELF linking. */
1274 static bfd_reloc_status_type
1275 mmix_elf_reloc (bfd *abfd,
1276 arelent *reloc_entry,
1279 asection *input_section,
1281 char **error_message)
1284 bfd_reloc_status_type r;
1285 asection *reloc_target_output_section;
1286 bfd_reloc_status_type flag = bfd_reloc_ok;
1287 bfd_vma output_base = 0;
1289 r = bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data,
1290 input_section, output_bfd, error_message);
1292 /* If that was all that was needed (i.e. this isn't a final link, only
1293 some segment adjustments), we're done. */
1294 if (r != bfd_reloc_continue)
1297 if (bfd_is_und_section (symbol->section)
1298 && (symbol->flags & BSF_WEAK) == 0
1299 && output_bfd == (bfd *) NULL)
1300 return bfd_reloc_undefined;
1302 /* Is the address of the relocation really within the section? */
1303 if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1304 return bfd_reloc_outofrange;
1306 /* Work out which section the relocation is targeted at and the
1307 initial relocation command value. */
1309 /* Get symbol value. (Common symbols are special.) */
1310 if (bfd_is_com_section (symbol->section))
1313 relocation = symbol->value;
1315 reloc_target_output_section = bfd_get_output_section (symbol);
1317 /* Here the variable relocation holds the final address of the symbol we
1318 are relocating against, plus any addend. */
1322 output_base = reloc_target_output_section->vma;
1324 relocation += output_base + symbol->section->output_offset;
1326 if (output_bfd != (bfd *) NULL)
1328 /* Add in supplied addend. */
1329 relocation += reloc_entry->addend;
1331 /* This is a partial relocation, and we want to apply the
1332 relocation to the reloc entry rather than the raw data.
1333 Modify the reloc inplace to reflect what we now know. */
1334 reloc_entry->addend = relocation;
1335 reloc_entry->address += input_section->output_offset;
1339 return mmix_final_link_relocate (reloc_entry->howto, input_section,
1340 data, reloc_entry->address,
1341 reloc_entry->addend, relocation,
1342 bfd_asymbol_name (symbol),
1343 reloc_target_output_section,
1347 /* Relocate an MMIX ELF section. Modified from elf32-fr30.c; look to it
1348 for guidance if you're thinking of copying this. */
1351 mmix_elf_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED,
1352 struct bfd_link_info *info,
1354 asection *input_section,
1356 Elf_Internal_Rela *relocs,
1357 Elf_Internal_Sym *local_syms,
1358 asection **local_sections)
1360 Elf_Internal_Shdr *symtab_hdr;
1361 struct elf_link_hash_entry **sym_hashes;
1362 Elf_Internal_Rela *rel;
1363 Elf_Internal_Rela *relend;
1367 size = input_section->rawsize ? input_section->rawsize : input_section->size;
1368 symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
1369 sym_hashes = elf_sym_hashes (input_bfd);
1370 relend = relocs + input_section->reloc_count;
1372 /* Zero the stub area before we start. */
1373 if (input_section->rawsize != 0
1374 && input_section->size > input_section->rawsize)
1375 memset (contents + input_section->rawsize, 0,
1376 input_section->size - input_section->rawsize);
1378 for (rel = relocs; rel < relend; rel ++)
1380 reloc_howto_type *howto;
1381 unsigned long r_symndx;
1382 Elf_Internal_Sym *sym;
1384 struct elf_link_hash_entry *h;
1386 bfd_reloc_status_type r;
1387 const char *name = NULL;
1389 bfd_boolean undefined_signalled = FALSE;
1391 r_type = ELF64_R_TYPE (rel->r_info);
1393 if (r_type == R_MMIX_GNU_VTINHERIT
1394 || r_type == R_MMIX_GNU_VTENTRY)
1397 r_symndx = ELF64_R_SYM (rel->r_info);
1399 howto = elf_mmix_howto_table + ELF64_R_TYPE (rel->r_info);
1404 if (r_symndx < symtab_hdr->sh_info)
1406 sym = local_syms + r_symndx;
1407 sec = local_sections [r_symndx];
1408 relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
1410 name = bfd_elf_string_from_elf_section (input_bfd,
1411 symtab_hdr->sh_link,
1414 name = bfd_section_name (input_bfd, sec);
1418 bfd_boolean unresolved_reloc, ignored;
1420 RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
1421 r_symndx, symtab_hdr, sym_hashes,
1423 unresolved_reloc, undefined_signalled,
1425 name = h->root.root.string;
1428 if (sec != NULL && discarded_section (sec))
1429 RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
1430 rel, 1, relend, howto, 0, contents);
1432 if (bfd_link_relocatable (info))
1434 /* This is a relocatable link. For most relocs we don't have to
1435 change anything, unless the reloc is against a section
1436 symbol, in which case we have to adjust according to where
1437 the section symbol winds up in the output section. */
1438 if (sym != NULL && ELF_ST_TYPE (sym->st_info) == STT_SECTION)
1439 rel->r_addend += sec->output_offset;
1441 /* For PUSHJ stub relocs however, we may need to change the
1442 reloc and the section contents, if the reloc doesn't reach
1443 beyond the end of the output section and previous stubs.
1444 Then we change the section contents to be a PUSHJ to the end
1445 of the input section plus stubs (we can do that without using
1446 a reloc), and then we change the reloc to be a R_MMIX_PUSHJ
1447 at the stub location. */
1448 if (r_type == R_MMIX_PUSHJ_STUBBABLE)
1450 /* We've already checked whether we need a stub; use that
1452 if (mmix_elf_section_data (input_section)->pjs.stub_size[pjsno]
1455 Elf_Internal_Rela relcpy;
1457 if (mmix_elf_section_data (input_section)
1458 ->pjs.stub_size[pjsno] != MAX_PUSHJ_STUB_SIZE)
1461 /* There's already a PUSHJ insn there, so just fill in
1462 the offset bits to the stub. */
1463 if (mmix_final_link_relocate (elf_mmix_howto_table
1470 ->output_section->vma
1471 + input_section->output_offset
1473 + mmix_elf_section_data (input_section)
1475 NULL, NULL, NULL) != bfd_reloc_ok)
1478 /* Put a JMP insn at the stub; it goes with the
1479 R_MMIX_JMP reloc. */
1480 bfd_put_32 (output_bfd, JMP_INSN_BYTE << 24,
1483 + mmix_elf_section_data (input_section)
1486 /* Change the reloc to be at the stub, and to a full
1487 R_MMIX_JMP reloc. */
1488 rel->r_info = ELF64_R_INFO (r_symndx, R_MMIX_JMP);
1491 + mmix_elf_section_data (input_section)
1494 mmix_elf_section_data (input_section)->pjs.stub_offset
1495 += MAX_PUSHJ_STUB_SIZE;
1497 /* Shift this reloc to the end of the relocs to maintain
1498 the r_offset sorted reloc order. */
1500 memmove (rel, rel + 1, (char *) relend - (char *) rel);
1501 relend[-1] = relcpy;
1503 /* Back up one reloc, or else we'd skip the next reloc
1513 r = mmix_final_link_relocate (howto, input_section,
1514 contents, rel->r_offset,
1515 rel->r_addend, relocation, name, sec, NULL);
1517 if (r != bfd_reloc_ok)
1519 bfd_boolean check_ok = TRUE;
1520 const char * msg = (const char *) NULL;
1524 case bfd_reloc_overflow:
1525 check_ok = info->callbacks->reloc_overflow
1526 (info, (h ? &h->root : NULL), name, howto->name,
1527 (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
1530 case bfd_reloc_undefined:
1531 /* We may have sent this message above. */
1532 if (! undefined_signalled)
1533 check_ok = info->callbacks->undefined_symbol
1534 (info, name, input_bfd, input_section, rel->r_offset,
1536 undefined_signalled = TRUE;
1539 case bfd_reloc_outofrange:
1540 msg = _("internal error: out of range error");
1543 case bfd_reloc_notsupported:
1544 msg = _("internal error: unsupported relocation error");
1547 case bfd_reloc_dangerous:
1548 msg = _("internal error: dangerous relocation");
1552 msg = _("internal error: unknown error");
1557 check_ok = info->callbacks->warning
1558 (info, msg, name, input_bfd, input_section, rel->r_offset);
1568 /* Perform a single relocation. By default we use the standard BFD
1569 routines. A few relocs we have to do ourselves. */
1571 static bfd_reloc_status_type
1572 mmix_final_link_relocate (reloc_howto_type *howto, asection *input_section,
1573 bfd_byte *contents, bfd_vma r_offset,
1574 bfd_signed_vma r_addend, bfd_vma relocation,
1575 const char *symname, asection *symsec,
1576 char **error_message)
1578 bfd_reloc_status_type r = bfd_reloc_ok;
1580 = (input_section->output_section->vma
1581 + input_section->output_offset
1584 = (bfd_signed_vma) relocation + r_addend;
1586 switch (howto->type)
1588 /* All these are PC-relative. */
1589 case R_MMIX_PUSHJ_STUBBABLE:
1591 case R_MMIX_CBRANCH:
1596 contents += r_offset;
1598 srel -= (input_section->output_section->vma
1599 + input_section->output_offset
1602 r = mmix_elf_perform_relocation (input_section, howto, contents,
1603 addr, srel, error_message);
1606 case R_MMIX_BASE_PLUS_OFFSET:
1608 return bfd_reloc_undefined;
1610 /* Check that we're not relocating against a register symbol. */
1611 if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1612 MMIX_REG_CONTENTS_SECTION_NAME) == 0
1613 || strcmp (bfd_get_section_name (symsec->owner, symsec),
1614 MMIX_REG_SECTION_NAME) == 0)
1616 /* Note: This is separated out into two messages in order
1617 to ease the translation into other languages. */
1618 if (symname == NULL || *symname == 0)
1619 (*_bfd_error_handler)
1620 (_("%s: base-plus-offset relocation against register symbol: (unknown) in %s"),
1621 bfd_get_filename (input_section->owner),
1622 bfd_get_section_name (symsec->owner, symsec));
1624 (*_bfd_error_handler)
1625 (_("%s: base-plus-offset relocation against register symbol: %s in %s"),
1626 bfd_get_filename (input_section->owner), symname,
1627 bfd_get_section_name (symsec->owner, symsec));
1628 return bfd_reloc_overflow;
1632 case R_MMIX_REG_OR_BYTE:
1634 /* For now, we handle these alike. They must refer to an register
1635 symbol, which is either relative to the register section and in
1636 the range 0..255, or is in the register contents section with vma
1639 /* FIXME: A better way to check for reg contents section?
1640 FIXME: Postpone section->scaling to mmix_elf_perform_relocation? */
1642 return bfd_reloc_undefined;
1644 if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1645 MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1647 if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1649 /* The bfd_reloc_outofrange return value, though intuitively
1650 a better value, will not get us an error. */
1651 return bfd_reloc_overflow;
1655 else if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1656 MMIX_REG_SECTION_NAME) == 0)
1658 if (srel < 0 || srel > 255)
1659 /* The bfd_reloc_outofrange return value, though intuitively a
1660 better value, will not get us an error. */
1661 return bfd_reloc_overflow;
1665 /* Note: This is separated out into two messages in order
1666 to ease the translation into other languages. */
1667 if (symname == NULL || *symname == 0)
1668 (*_bfd_error_handler)
1669 (_("%s: register relocation against non-register symbol: (unknown) in %s"),
1670 bfd_get_filename (input_section->owner),
1671 bfd_get_section_name (symsec->owner, symsec));
1673 (*_bfd_error_handler)
1674 (_("%s: register relocation against non-register symbol: %s in %s"),
1675 bfd_get_filename (input_section->owner), symname,
1676 bfd_get_section_name (symsec->owner, symsec));
1678 /* The bfd_reloc_outofrange return value, though intuitively a
1679 better value, will not get us an error. */
1680 return bfd_reloc_overflow;
1683 contents += r_offset;
1684 r = mmix_elf_perform_relocation (input_section, howto, contents,
1685 addr, srel, error_message);
1689 /* This isn't a real relocation, it's just an assertion that the
1690 final relocation value corresponds to a local register. We
1691 ignore the actual relocation; nothing is changed. */
1694 = bfd_get_section_by_name (input_section->output_section->owner,
1695 MMIX_REG_CONTENTS_SECTION_NAME);
1696 bfd_vma first_global;
1698 /* Check that this is an absolute value, or a reference to the
1699 register contents section or the register (symbol) section.
1700 Absolute numbers can get here as undefined section. Undefined
1701 symbols are signalled elsewhere, so there's no conflict in us
1702 accidentally handling it. */
1703 if (!bfd_is_abs_section (symsec)
1704 && !bfd_is_und_section (symsec)
1705 && strcmp (bfd_get_section_name (symsec->owner, symsec),
1706 MMIX_REG_CONTENTS_SECTION_NAME) != 0
1707 && strcmp (bfd_get_section_name (symsec->owner, symsec),
1708 MMIX_REG_SECTION_NAME) != 0)
1710 (*_bfd_error_handler)
1711 (_("%s: directive LOCAL valid only with a register or absolute value"),
1712 bfd_get_filename (input_section->owner));
1714 return bfd_reloc_overflow;
1717 /* If we don't have a register contents section, then $255 is the
1718 first global register. */
1724 = bfd_get_section_vma (input_section->output_section->owner,
1726 if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1727 MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1729 if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1730 /* The bfd_reloc_outofrange return value, though
1731 intuitively a better value, will not get us an error. */
1732 return bfd_reloc_overflow;
1737 if ((bfd_vma) srel >= first_global)
1739 /* FIXME: Better error message. */
1740 (*_bfd_error_handler)
1741 (_("%s: LOCAL directive: Register $%ld is not a local register. First global register is $%ld."),
1742 bfd_get_filename (input_section->owner), (long) srel, (long) first_global);
1744 return bfd_reloc_overflow;
1751 r = _bfd_final_link_relocate (howto, input_section->owner, input_section,
1753 relocation, r_addend);
1759 /* Return the section that should be marked against GC for a given
1763 mmix_elf_gc_mark_hook (asection *sec,
1764 struct bfd_link_info *info,
1765 Elf_Internal_Rela *rel,
1766 struct elf_link_hash_entry *h,
1767 Elf_Internal_Sym *sym)
1770 switch (ELF64_R_TYPE (rel->r_info))
1772 case R_MMIX_GNU_VTINHERIT:
1773 case R_MMIX_GNU_VTENTRY:
1777 return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym);
1780 /* Update relocation info for a GC-excluded section. We could supposedly
1781 perform the allocation after GC, but there's no suitable hook between
1782 GC (or section merge) and the point when all input sections must be
1783 present. Better to waste some memory and (perhaps) a little time. */
1786 mmix_elf_gc_sweep_hook (bfd *abfd ATTRIBUTE_UNUSED,
1787 struct bfd_link_info *info ATTRIBUTE_UNUSED,
1789 const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED)
1791 struct bpo_reloc_section_info *bpodata
1792 = mmix_elf_section_data (sec)->bpo.reloc;
1793 asection *allocated_gregs_section;
1795 /* If no bpodata here, we have nothing to do. */
1796 if (bpodata == NULL)
1799 allocated_gregs_section = bpodata->bpo_greg_section;
1801 mmix_elf_section_data (allocated_gregs_section)->bpo.greg->n_bpo_relocs
1802 -= bpodata->n_bpo_relocs_this_section;
1807 /* Sort register relocs to come before expanding relocs. */
1810 mmix_elf_sort_relocs (const void * p1, const void * p2)
1812 const Elf_Internal_Rela *r1 = (const Elf_Internal_Rela *) p1;
1813 const Elf_Internal_Rela *r2 = (const Elf_Internal_Rela *) p2;
1814 int r1_is_reg, r2_is_reg;
1816 /* Sort primarily on r_offset & ~3, so relocs are done to consecutive
1818 if ((r1->r_offset & ~(bfd_vma) 3) > (r2->r_offset & ~(bfd_vma) 3))
1820 else if ((r1->r_offset & ~(bfd_vma) 3) < (r2->r_offset & ~(bfd_vma) 3))
1824 = (ELF64_R_TYPE (r1->r_info) == R_MMIX_REG_OR_BYTE
1825 || ELF64_R_TYPE (r1->r_info) == R_MMIX_REG);
1827 = (ELF64_R_TYPE (r2->r_info) == R_MMIX_REG_OR_BYTE
1828 || ELF64_R_TYPE (r2->r_info) == R_MMIX_REG);
1829 if (r1_is_reg != r2_is_reg)
1830 return r2_is_reg - r1_is_reg;
1832 /* Neither or both are register relocs. Then sort on full offset. */
1833 if (r1->r_offset > r2->r_offset)
1835 else if (r1->r_offset < r2->r_offset)
1840 /* Subset of mmix_elf_check_relocs, common to ELF and mmo linking. */
1843 mmix_elf_check_common_relocs (bfd *abfd,
1844 struct bfd_link_info *info,
1846 const Elf_Internal_Rela *relocs)
1848 bfd *bpo_greg_owner = NULL;
1849 asection *allocated_gregs_section = NULL;
1850 struct bpo_greg_section_info *gregdata = NULL;
1851 struct bpo_reloc_section_info *bpodata = NULL;
1852 const Elf_Internal_Rela *rel;
1853 const Elf_Internal_Rela *rel_end;
1855 /* We currently have to abuse this COFF-specific member, since there's
1856 no target-machine-dedicated member. There's no alternative outside
1857 the bfd_link_info struct; we can't specialize a hash-table since
1858 they're different between ELF and mmo. */
1859 bpo_greg_owner = (bfd *) info->base_file;
1861 rel_end = relocs + sec->reloc_count;
1862 for (rel = relocs; rel < rel_end; rel++)
1864 switch (ELF64_R_TYPE (rel->r_info))
1866 /* This relocation causes a GREG allocation. We need to count
1867 them, and we need to create a section for them, so we need an
1868 object to fake as the owner of that section. We can't use
1869 the ELF dynobj for this, since the ELF bits assume lots of
1870 DSO-related stuff if that member is non-NULL. */
1871 case R_MMIX_BASE_PLUS_OFFSET:
1872 /* We don't do anything with this reloc for a relocatable link. */
1873 if (bfd_link_relocatable (info))
1876 if (bpo_greg_owner == NULL)
1878 bpo_greg_owner = abfd;
1879 info->base_file = bpo_greg_owner;
1882 if (allocated_gregs_section == NULL)
1883 allocated_gregs_section
1884 = bfd_get_section_by_name (bpo_greg_owner,
1885 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
1887 if (allocated_gregs_section == NULL)
1889 allocated_gregs_section
1890 = bfd_make_section_with_flags (bpo_greg_owner,
1891 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME,
1894 | SEC_LINKER_CREATED));
1895 /* Setting both SEC_ALLOC and SEC_LOAD means the section is
1896 treated like any other section, and we'd get errors for
1897 address overlap with the text section. Let's set none of
1898 those flags, as that is what currently happens for usual
1899 GREG allocations, and that works. */
1900 if (allocated_gregs_section == NULL
1901 || !bfd_set_section_alignment (bpo_greg_owner,
1902 allocated_gregs_section,
1906 gregdata = (struct bpo_greg_section_info *)
1907 bfd_zalloc (bpo_greg_owner, sizeof (struct bpo_greg_section_info));
1908 if (gregdata == NULL)
1910 mmix_elf_section_data (allocated_gregs_section)->bpo.greg
1913 else if (gregdata == NULL)
1915 = mmix_elf_section_data (allocated_gregs_section)->bpo.greg;
1917 /* Get ourselves some auxiliary info for the BPO-relocs. */
1918 if (bpodata == NULL)
1920 /* No use doing a separate iteration pass to find the upper
1921 limit - just use the number of relocs. */
1922 bpodata = (struct bpo_reloc_section_info *)
1923 bfd_alloc (bpo_greg_owner,
1924 sizeof (struct bpo_reloc_section_info)
1925 * (sec->reloc_count + 1));
1926 if (bpodata == NULL)
1928 mmix_elf_section_data (sec)->bpo.reloc = bpodata;
1929 bpodata->first_base_plus_offset_reloc
1930 = bpodata->bpo_index
1931 = gregdata->n_max_bpo_relocs;
1932 bpodata->bpo_greg_section
1933 = allocated_gregs_section;
1934 bpodata->n_bpo_relocs_this_section = 0;
1937 bpodata->n_bpo_relocs_this_section++;
1938 gregdata->n_max_bpo_relocs++;
1940 /* We don't get another chance to set this before GC; we've not
1941 set up any hook that runs before GC. */
1942 gregdata->n_bpo_relocs
1943 = gregdata->n_max_bpo_relocs;
1946 case R_MMIX_PUSHJ_STUBBABLE:
1947 mmix_elf_section_data (sec)->pjs.n_pushj_relocs++;
1952 /* Allocate per-reloc stub storage and initialize it to the max stub
1954 if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs != 0)
1958 mmix_elf_section_data (sec)->pjs.stub_size
1959 = bfd_alloc (abfd, mmix_elf_section_data (sec)->pjs.n_pushj_relocs
1960 * sizeof (mmix_elf_section_data (sec)
1961 ->pjs.stub_size[0]));
1962 if (mmix_elf_section_data (sec)->pjs.stub_size == NULL)
1965 for (i = 0; i < mmix_elf_section_data (sec)->pjs.n_pushj_relocs; i++)
1966 mmix_elf_section_data (sec)->pjs.stub_size[i] = MAX_PUSHJ_STUB_SIZE;
1972 /* Look through the relocs for a section during the first phase. */
1975 mmix_elf_check_relocs (bfd *abfd,
1976 struct bfd_link_info *info,
1978 const Elf_Internal_Rela *relocs)
1980 Elf_Internal_Shdr *symtab_hdr;
1981 struct elf_link_hash_entry **sym_hashes;
1982 const Elf_Internal_Rela *rel;
1983 const Elf_Internal_Rela *rel_end;
1985 symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
1986 sym_hashes = elf_sym_hashes (abfd);
1988 /* First we sort the relocs so that any register relocs come before
1989 expansion-relocs to the same insn. FIXME: Not done for mmo. */
1990 qsort ((void *) relocs, sec->reloc_count, sizeof (Elf_Internal_Rela),
1991 mmix_elf_sort_relocs);
1993 /* Do the common part. */
1994 if (!mmix_elf_check_common_relocs (abfd, info, sec, relocs))
1997 if (bfd_link_relocatable (info))
2000 rel_end = relocs + sec->reloc_count;
2001 for (rel = relocs; rel < rel_end; rel++)
2003 struct elf_link_hash_entry *h;
2004 unsigned long r_symndx;
2006 r_symndx = ELF64_R_SYM (rel->r_info);
2007 if (r_symndx < symtab_hdr->sh_info)
2011 h = sym_hashes[r_symndx - symtab_hdr->sh_info];
2012 while (h->root.type == bfd_link_hash_indirect
2013 || h->root.type == bfd_link_hash_warning)
2014 h = (struct elf_link_hash_entry *) h->root.u.i.link;
2016 /* PR15323, ref flags aren't set for references in the same
2018 h->root.non_ir_ref = 1;
2021 switch (ELF64_R_TYPE (rel->r_info))
2023 /* This relocation describes the C++ object vtable hierarchy.
2024 Reconstruct it for later use during GC. */
2025 case R_MMIX_GNU_VTINHERIT:
2026 if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset))
2030 /* This relocation describes which C++ vtable entries are actually
2031 used. Record for later use during GC. */
2032 case R_MMIX_GNU_VTENTRY:
2033 BFD_ASSERT (h != NULL);
2035 && !bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend))
2044 /* Wrapper for mmix_elf_check_common_relocs, called when linking to mmo.
2045 Copied from elf_link_add_object_symbols. */
2048 _bfd_mmix_check_all_relocs (bfd *abfd, struct bfd_link_info *info)
2052 for (o = abfd->sections; o != NULL; o = o->next)
2054 Elf_Internal_Rela *internal_relocs;
2057 if ((o->flags & SEC_RELOC) == 0
2058 || o->reloc_count == 0
2059 || ((info->strip == strip_all || info->strip == strip_debugger)
2060 && (o->flags & SEC_DEBUGGING) != 0)
2061 || bfd_is_abs_section (o->output_section))
2065 = _bfd_elf_link_read_relocs (abfd, o, NULL,
2066 (Elf_Internal_Rela *) NULL,
2068 if (internal_relocs == NULL)
2071 ok = mmix_elf_check_common_relocs (abfd, info, o, internal_relocs);
2073 if (! info->keep_memory)
2074 free (internal_relocs);
2083 /* Change symbols relative to the reg contents section to instead be to
2084 the register section, and scale them down to correspond to the register
2088 mmix_elf_link_output_symbol_hook (struct bfd_link_info *info ATTRIBUTE_UNUSED,
2089 const char *name ATTRIBUTE_UNUSED,
2090 Elf_Internal_Sym *sym,
2091 asection *input_sec,
2092 struct elf_link_hash_entry *h ATTRIBUTE_UNUSED)
2094 if (input_sec != NULL
2095 && input_sec->name != NULL
2096 && ELF_ST_TYPE (sym->st_info) != STT_SECTION
2097 && strcmp (input_sec->name, MMIX_REG_CONTENTS_SECTION_NAME) == 0)
2100 sym->st_shndx = SHN_REGISTER;
2106 /* We fake a register section that holds values that are register numbers.
2107 Having a SHN_REGISTER and register section translates better to other
2108 formats (e.g. mmo) than for example a STT_REGISTER attribute.
2109 This section faking is based on a construct in elf32-mips.c. */
2110 static asection mmix_elf_reg_section;
2111 static asymbol mmix_elf_reg_section_symbol;
2112 static asymbol *mmix_elf_reg_section_symbol_ptr;
2114 /* Handle the special section numbers that a symbol may use. */
2117 mmix_elf_symbol_processing (bfd *abfd ATTRIBUTE_UNUSED, asymbol *asym)
2119 elf_symbol_type *elfsym;
2121 elfsym = (elf_symbol_type *) asym;
2122 switch (elfsym->internal_elf_sym.st_shndx)
2125 if (mmix_elf_reg_section.name == NULL)
2127 /* Initialize the register section. */
2128 mmix_elf_reg_section.name = MMIX_REG_SECTION_NAME;
2129 mmix_elf_reg_section.flags = SEC_NO_FLAGS;
2130 mmix_elf_reg_section.output_section = &mmix_elf_reg_section;
2131 mmix_elf_reg_section.symbol = &mmix_elf_reg_section_symbol;
2132 mmix_elf_reg_section.symbol_ptr_ptr = &mmix_elf_reg_section_symbol_ptr;
2133 mmix_elf_reg_section_symbol.name = MMIX_REG_SECTION_NAME;
2134 mmix_elf_reg_section_symbol.flags = BSF_SECTION_SYM;
2135 mmix_elf_reg_section_symbol.section = &mmix_elf_reg_section;
2136 mmix_elf_reg_section_symbol_ptr = &mmix_elf_reg_section_symbol;
2138 asym->section = &mmix_elf_reg_section;
2146 /* Given a BFD section, try to locate the corresponding ELF section
2150 mmix_elf_section_from_bfd_section (bfd * abfd ATTRIBUTE_UNUSED,
2154 if (strcmp (bfd_get_section_name (abfd, sec), MMIX_REG_SECTION_NAME) == 0)
2155 *retval = SHN_REGISTER;
2162 /* Hook called by the linker routine which adds symbols from an object
2163 file. We must handle the special SHN_REGISTER section number here.
2165 We also check that we only have *one* each of the section-start
2166 symbols, since otherwise having two with the same value would cause
2167 them to be "merged", but with the contents serialized. */
2170 mmix_elf_add_symbol_hook (bfd *abfd,
2171 struct bfd_link_info *info ATTRIBUTE_UNUSED,
2172 Elf_Internal_Sym *sym,
2173 const char **namep ATTRIBUTE_UNUSED,
2174 flagword *flagsp ATTRIBUTE_UNUSED,
2176 bfd_vma *valp ATTRIBUTE_UNUSED)
2178 if (sym->st_shndx == SHN_REGISTER)
2180 *secp = bfd_make_section_old_way (abfd, MMIX_REG_SECTION_NAME);
2181 (*secp)->flags |= SEC_LINKER_CREATED;
2183 else if ((*namep)[0] == '_' && (*namep)[1] == '_' && (*namep)[2] == '.'
2184 && CONST_STRNEQ (*namep, MMIX_LOC_SECTION_START_SYMBOL_PREFIX))
2186 /* See if we have another one. */
2187 struct bfd_link_hash_entry *h = bfd_link_hash_lookup (info->hash,
2193 if (h != NULL && h->type != bfd_link_hash_undefined)
2195 /* How do we get the asymbol (or really: the filename) from h?
2196 h->u.def.section->owner is NULL. */
2197 ((*_bfd_error_handler)
2198 (_("%s: Error: multiple definition of `%s'; start of %s is set in a earlier linked file\n"),
2199 bfd_get_filename (abfd), *namep,
2200 *namep + strlen (MMIX_LOC_SECTION_START_SYMBOL_PREFIX)));
2201 bfd_set_error (bfd_error_bad_value);
2209 /* We consider symbols matching "L.*:[0-9]+" to be local symbols. */
2212 mmix_elf_is_local_label_name (bfd *abfd, const char *name)
2217 /* Also include the default local-label definition. */
2218 if (_bfd_elf_is_local_label_name (abfd, name))
2224 /* If there's no ":", or more than one, it's not a local symbol. */
2225 colpos = strchr (name, ':');
2226 if (colpos == NULL || strchr (colpos + 1, ':') != NULL)
2229 /* Check that there are remaining characters and that they are digits. */
2233 digits = strspn (colpos + 1, "0123456789");
2234 return digits != 0 && colpos[1 + digits] == 0;
2237 /* We get rid of the register section here. */
2240 mmix_elf_final_link (bfd *abfd, struct bfd_link_info *info)
2242 /* We never output a register section, though we create one for
2243 temporary measures. Check that nobody entered contents into it. */
2244 asection *reg_section;
2246 reg_section = bfd_get_section_by_name (abfd, MMIX_REG_SECTION_NAME);
2248 if (reg_section != NULL)
2250 /* FIXME: Pass error state gracefully. */
2251 if (bfd_get_section_flags (abfd, reg_section) & SEC_HAS_CONTENTS)
2252 _bfd_abort (__FILE__, __LINE__, _("Register section has contents\n"));
2254 /* Really remove the section, if it hasn't already been done. */
2255 if (!bfd_section_removed_from_list (abfd, reg_section))
2257 bfd_section_list_remove (abfd, reg_section);
2258 --abfd->section_count;
2262 if (! bfd_elf_final_link (abfd, info))
2265 /* Since this section is marked SEC_LINKER_CREATED, it isn't output by
2266 the regular linker machinery. We do it here, like other targets with
2267 special sections. */
2268 if (info->base_file != NULL)
2270 asection *greg_section
2271 = bfd_get_section_by_name ((bfd *) info->base_file,
2272 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2273 if (!bfd_set_section_contents (abfd,
2274 greg_section->output_section,
2275 greg_section->contents,
2276 (file_ptr) greg_section->output_offset,
2277 greg_section->size))
2283 /* We need to include the maximum size of PUSHJ-stubs in the initial
2284 section size. This is expected to shrink during linker relaxation. */
2287 mmix_set_relaxable_size (bfd *abfd ATTRIBUTE_UNUSED,
2291 struct bfd_link_info *info = ptr;
2293 /* Make sure we only do this for section where we know we want this,
2294 otherwise we might end up resetting the size of COMMONs. */
2295 if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0)
2298 sec->rawsize = sec->size;
2299 sec->size += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2300 * MAX_PUSHJ_STUB_SIZE);
2302 /* For use in relocatable link, we start with a max stubs size. See
2303 mmix_elf_relax_section. */
2304 if (bfd_link_relocatable (info) && sec->output_section)
2305 mmix_elf_section_data (sec->output_section)->pjs.stubs_size_sum
2306 += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2307 * MAX_PUSHJ_STUB_SIZE);
2310 /* Initialize stuff for the linker-generated GREGs to match
2311 R_MMIX_BASE_PLUS_OFFSET relocs seen by the linker. */
2314 _bfd_mmix_before_linker_allocation (bfd *abfd ATTRIBUTE_UNUSED,
2315 struct bfd_link_info *info)
2317 asection *bpo_gregs_section;
2318 bfd *bpo_greg_owner;
2319 struct bpo_greg_section_info *gregdata;
2323 size_t *bpo_reloc_indexes;
2326 /* Set the initial size of sections. */
2327 for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link.next)
2328 bfd_map_over_sections (ibfd, mmix_set_relaxable_size, info);
2330 /* The bpo_greg_owner bfd is supposed to have been set by
2331 mmix_elf_check_relocs when the first R_MMIX_BASE_PLUS_OFFSET is seen.
2332 If there is no such object, there was no R_MMIX_BASE_PLUS_OFFSET. */
2333 bpo_greg_owner = (bfd *) info->base_file;
2334 if (bpo_greg_owner == NULL)
2338 = bfd_get_section_by_name (bpo_greg_owner,
2339 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2341 if (bpo_gregs_section == NULL)
2344 /* We use the target-data handle in the ELF section data. */
2345 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2346 if (gregdata == NULL)
2349 n_gregs = gregdata->n_bpo_relocs;
2350 gregdata->n_allocated_bpo_gregs = n_gregs;
2352 /* When this reaches zero during relaxation, all entries have been
2353 filled in and the size of the linker gregs can be calculated. */
2354 gregdata->n_remaining_bpo_relocs_this_relaxation_round = n_gregs;
2356 /* Set the zeroth-order estimate for the GREGs size. */
2357 gregs_size = n_gregs * 8;
2359 if (!bfd_set_section_size (bpo_greg_owner, bpo_gregs_section, gregs_size))
2362 /* Allocate and set up the GREG arrays. They're filled in at relaxation
2363 time. Note that we must use the max number ever noted for the array,
2364 since the index numbers were created before GC. */
2365 gregdata->reloc_request
2366 = bfd_zalloc (bpo_greg_owner,
2367 sizeof (struct bpo_reloc_request)
2368 * gregdata->n_max_bpo_relocs);
2370 gregdata->bpo_reloc_indexes
2372 = bfd_alloc (bpo_greg_owner,
2373 gregdata->n_max_bpo_relocs
2375 if (bpo_reloc_indexes == NULL)
2378 /* The default order is an identity mapping. */
2379 for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2381 bpo_reloc_indexes[i] = i;
2382 gregdata->reloc_request[i].bpo_reloc_no = i;
2388 /* Fill in contents in the linker allocated gregs. Everything is
2389 calculated at this point; we just move the contents into place here. */
2392 _bfd_mmix_after_linker_allocation (bfd *abfd ATTRIBUTE_UNUSED,
2393 struct bfd_link_info *link_info)
2395 asection *bpo_gregs_section;
2396 bfd *bpo_greg_owner;
2397 struct bpo_greg_section_info *gregdata;
2403 /* The bpo_greg_owner bfd is supposed to have been set by mmix_elf_check_relocs
2404 when the first R_MMIX_BASE_PLUS_OFFSET is seen. If there is no such
2405 object, there was no R_MMIX_BASE_PLUS_OFFSET. */
2406 bpo_greg_owner = (bfd *) link_info->base_file;
2407 if (bpo_greg_owner == NULL)
2411 = bfd_get_section_by_name (bpo_greg_owner,
2412 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2414 /* This can't happen without DSO handling. When DSOs are handled
2415 without any R_MMIX_BASE_PLUS_OFFSET seen, there will be no such
2417 if (bpo_gregs_section == NULL)
2420 /* We use the target-data handle in the ELF section data. */
2422 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2423 if (gregdata == NULL)
2426 n_gregs = gregdata->n_allocated_bpo_gregs;
2428 bpo_gregs_section->contents
2429 = contents = bfd_alloc (bpo_greg_owner, bpo_gregs_section->size);
2430 if (contents == NULL)
2433 /* Sanity check: If these numbers mismatch, some relocation has not been
2434 accounted for and the rest of gregdata is probably inconsistent.
2435 It's a bug, but it's more helpful to identify it than segfaulting
2437 if (gregdata->n_remaining_bpo_relocs_this_relaxation_round
2438 != gregdata->n_bpo_relocs)
2440 (*_bfd_error_handler)
2441 (_("Internal inconsistency: remaining %u != max %u.\n\
2442 Please report this bug."),
2443 gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2444 gregdata->n_bpo_relocs);
2448 for (lastreg = 255, i = 0, j = 0; j < n_gregs; i++)
2449 if (gregdata->reloc_request[i].regindex != lastreg)
2451 bfd_put_64 (bpo_greg_owner, gregdata->reloc_request[i].value,
2453 lastreg = gregdata->reloc_request[i].regindex;
2460 /* Sort valid relocs to come before non-valid relocs, then on increasing
2464 bpo_reloc_request_sort_fn (const void * p1, const void * p2)
2466 const struct bpo_reloc_request *r1 = (const struct bpo_reloc_request *) p1;
2467 const struct bpo_reloc_request *r2 = (const struct bpo_reloc_request *) p2;
2469 /* Primary function is validity; non-valid relocs sorted after valid
2471 if (r1->valid != r2->valid)
2472 return r2->valid - r1->valid;
2474 /* Then sort on value. Don't simplify and return just the difference of
2475 the values: the upper bits of the 64-bit value would be truncated on
2476 a host with 32-bit ints. */
2477 if (r1->value != r2->value)
2478 return r1->value > r2->value ? 1 : -1;
2480 /* As a last re-sort, use the relocation number, so we get a stable
2481 sort. The *addresses* aren't stable since items are swapped during
2482 sorting. It depends on the qsort implementation if this actually
2484 return r1->bpo_reloc_no > r2->bpo_reloc_no
2485 ? 1 : (r1->bpo_reloc_no < r2->bpo_reloc_no ? -1 : 0);
2488 /* For debug use only. Dumps the global register allocations resulting
2489 from base-plus-offset relocs. */
2492 mmix_dump_bpo_gregs (struct bfd_link_info *link_info,
2493 bfd_error_handler_type pf)
2495 bfd *bpo_greg_owner;
2496 asection *bpo_gregs_section;
2497 struct bpo_greg_section_info *gregdata;
2500 if (link_info == NULL || link_info->base_file == NULL)
2503 bpo_greg_owner = (bfd *) link_info->base_file;
2506 = bfd_get_section_by_name (bpo_greg_owner,
2507 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2509 if (bpo_gregs_section == NULL)
2512 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2513 if (gregdata == NULL)
2517 pf = _bfd_error_handler;
2519 /* These format strings are not translated. They are for debug purposes
2520 only and never displayed to an end user. Should they escape, we
2521 surely want them in original. */
2522 (*pf) (" n_bpo_relocs: %u\n n_max_bpo_relocs: %u\n n_remain...round: %u\n\
2523 n_allocated_bpo_gregs: %u\n", gregdata->n_bpo_relocs,
2524 gregdata->n_max_bpo_relocs,
2525 gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2526 gregdata->n_allocated_bpo_gregs);
2528 if (gregdata->reloc_request)
2529 for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2530 (*pf) ("%4u (%4u)/%4u#%u: 0x%08lx%08lx r: %3u o: %3u\n",
2532 (gregdata->bpo_reloc_indexes != NULL
2533 ? gregdata->bpo_reloc_indexes[i] : (size_t) -1),
2534 gregdata->reloc_request[i].bpo_reloc_no,
2535 gregdata->reloc_request[i].valid,
2537 (unsigned long) (gregdata->reloc_request[i].value >> 32),
2538 (unsigned long) gregdata->reloc_request[i].value,
2539 gregdata->reloc_request[i].regindex,
2540 gregdata->reloc_request[i].offset);
2543 /* This links all R_MMIX_BASE_PLUS_OFFSET relocs into a special array, and
2544 when the last such reloc is done, an index-array is sorted according to
2545 the values and iterated over to produce register numbers (indexed by 0
2546 from the first allocated register number) and offsets for use in real
2547 relocation. (N.B.: Relocatable runs are handled, not just punted.)
2549 PUSHJ stub accounting is also done here.
2551 Symbol- and reloc-reading infrastructure copied from elf-m10200.c. */
2554 mmix_elf_relax_section (bfd *abfd,
2556 struct bfd_link_info *link_info,
2559 Elf_Internal_Shdr *symtab_hdr;
2560 Elf_Internal_Rela *internal_relocs;
2561 Elf_Internal_Rela *irel, *irelend;
2562 asection *bpo_gregs_section = NULL;
2563 struct bpo_greg_section_info *gregdata;
2564 struct bpo_reloc_section_info *bpodata
2565 = mmix_elf_section_data (sec)->bpo.reloc;
2566 /* The initialization is to quiet compiler warnings. The value is to
2567 spot a missing actual initialization. */
2568 size_t bpono = (size_t) -1;
2570 Elf_Internal_Sym *isymbuf = NULL;
2571 bfd_size_type size = sec->rawsize ? sec->rawsize : sec->size;
2573 mmix_elf_section_data (sec)->pjs.stubs_size_sum = 0;
2575 /* Assume nothing changes. */
2578 /* We don't have to do anything if this section does not have relocs, or
2579 if this is not a code section. */
2580 if ((sec->flags & SEC_RELOC) == 0
2581 || sec->reloc_count == 0
2582 || (sec->flags & SEC_CODE) == 0
2583 || (sec->flags & SEC_LINKER_CREATED) != 0
2584 /* If no R_MMIX_BASE_PLUS_OFFSET relocs and no PUSHJ-stub relocs,
2585 then nothing to do. */
2587 && mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0))
2590 symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
2592 if (bpodata != NULL)
2594 bpo_gregs_section = bpodata->bpo_greg_section;
2595 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2596 bpono = bpodata->first_base_plus_offset_reloc;
2601 /* Get a copy of the native relocations. */
2603 = _bfd_elf_link_read_relocs (abfd, sec, NULL,
2604 (Elf_Internal_Rela *) NULL,
2605 link_info->keep_memory);
2606 if (internal_relocs == NULL)
2609 /* Walk through them looking for relaxing opportunities. */
2610 irelend = internal_relocs + sec->reloc_count;
2611 for (irel = internal_relocs; irel < irelend; irel++)
2614 struct elf_link_hash_entry *h = NULL;
2616 /* We only process two relocs. */
2617 if (ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_BASE_PLUS_OFFSET
2618 && ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_PUSHJ_STUBBABLE)
2621 /* We process relocs in a distinctly different way when this is a
2622 relocatable link (for one, we don't look at symbols), so we avoid
2623 mixing its code with that for the "normal" relaxation. */
2624 if (bfd_link_relocatable (link_info))
2626 /* The only transformation in a relocatable link is to generate
2627 a full stub at the location of the stub calculated for the
2628 input section, if the relocated stub location, the end of the
2629 output section plus earlier stubs, cannot be reached. Thus
2630 relocatable linking can only lead to worse code, but it still
2632 if (ELF64_R_TYPE (irel->r_info) == R_MMIX_PUSHJ_STUBBABLE)
2634 /* If we can reach the end of the output-section and beyond
2635 any current stubs, then we don't need a stub for this
2636 reloc. The relaxed order of output stub allocation may
2637 not exactly match the straightforward order, so we always
2638 assume presence of output stubs, which will allow
2639 relaxation only on relocations indifferent to the
2640 presence of output stub allocations for other relocations
2641 and thus the order of output stub allocation. */
2642 if (bfd_check_overflow (complain_overflow_signed,
2645 bfd_arch_bits_per_address (abfd),
2646 /* Output-stub location. */
2647 sec->output_section->rawsize
2648 + (mmix_elf_section_data (sec
2650 ->pjs.stubs_size_sum)
2651 /* Location of this PUSHJ reloc. */
2652 - (sec->output_offset + irel->r_offset)
2653 /* Don't count *this* stub twice. */
2654 - (mmix_elf_section_data (sec)
2655 ->pjs.stub_size[pjsno]
2656 + MAX_PUSHJ_STUB_SIZE))
2658 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2660 mmix_elf_section_data (sec)->pjs.stubs_size_sum
2661 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2669 /* Get the value of the symbol referred to by the reloc. */
2670 if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info)
2672 /* A local symbol. */
2673 Elf_Internal_Sym *isym;
2676 /* Read this BFD's local symbols if we haven't already. */
2677 if (isymbuf == NULL)
2679 isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
2680 if (isymbuf == NULL)
2681 isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
2682 symtab_hdr->sh_info, 0,
2688 isym = isymbuf + ELF64_R_SYM (irel->r_info);
2689 if (isym->st_shndx == SHN_UNDEF)
2690 sym_sec = bfd_und_section_ptr;
2691 else if (isym->st_shndx == SHN_ABS)
2692 sym_sec = bfd_abs_section_ptr;
2693 else if (isym->st_shndx == SHN_COMMON)
2694 sym_sec = bfd_com_section_ptr;
2696 sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
2697 symval = (isym->st_value
2698 + sym_sec->output_section->vma
2699 + sym_sec->output_offset);
2705 /* An external symbol. */
2706 indx = ELF64_R_SYM (irel->r_info) - symtab_hdr->sh_info;
2707 h = elf_sym_hashes (abfd)[indx];
2708 BFD_ASSERT (h != NULL);
2709 if (h->root.type != bfd_link_hash_defined
2710 && h->root.type != bfd_link_hash_defweak)
2712 /* This appears to be a reference to an undefined symbol. Just
2713 ignore it--it will be caught by the regular reloc processing.
2714 We need to keep BPO reloc accounting consistent, though
2715 else we'll abort instead of emitting an error message. */
2716 if (ELF64_R_TYPE (irel->r_info) == R_MMIX_BASE_PLUS_OFFSET
2717 && gregdata != NULL)
2719 gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2725 symval = (h->root.u.def.value
2726 + h->root.u.def.section->output_section->vma
2727 + h->root.u.def.section->output_offset);
2730 if (ELF64_R_TYPE (irel->r_info) == (int) R_MMIX_PUSHJ_STUBBABLE)
2732 bfd_vma value = symval + irel->r_addend;
2734 = (sec->output_section->vma
2735 + sec->output_offset
2738 = (sec->output_section->vma
2739 + sec->output_offset
2741 + mmix_elf_section_data (sec)->pjs.stubs_size_sum);
2743 if ((value & 3) == 0
2744 && bfd_check_overflow (complain_overflow_signed,
2747 bfd_arch_bits_per_address (abfd),
2750 ? mmix_elf_section_data (sec)
2751 ->pjs.stub_size[pjsno]
2754 /* If the reloc fits, no stub is needed. */
2755 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2757 /* Maybe we can get away with just a JMP insn? */
2758 if ((value & 3) == 0
2759 && bfd_check_overflow (complain_overflow_signed,
2762 bfd_arch_bits_per_address (abfd),
2765 ? mmix_elf_section_data (sec)
2766 ->pjs.stub_size[pjsno] - 4
2769 /* Yep, account for a stub consisting of a single JMP insn. */
2770 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 4;
2772 /* Nope, go for the full insn stub. It doesn't seem useful to
2773 emit the intermediate sizes; those will only be useful for
2774 a >64M program assuming contiguous code. */
2775 mmix_elf_section_data (sec)->pjs.stub_size[pjsno]
2776 = MAX_PUSHJ_STUB_SIZE;
2778 mmix_elf_section_data (sec)->pjs.stubs_size_sum
2779 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2784 /* We're looking at a R_MMIX_BASE_PLUS_OFFSET reloc. */
2786 gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono]].value
2787 = symval + irel->r_addend;
2788 gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono++]].valid = TRUE;
2789 gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2792 /* Check if that was the last BPO-reloc. If so, sort the values and
2793 calculate how many registers we need to cover them. Set the size of
2794 the linker gregs, and if the number of registers changed, indicate
2795 that we need to relax some more because we have more work to do. */
2796 if (gregdata != NULL
2797 && gregdata->n_remaining_bpo_relocs_this_relaxation_round == 0)
2803 /* First, reset the remaining relocs for the next round. */
2804 gregdata->n_remaining_bpo_relocs_this_relaxation_round
2805 = gregdata->n_bpo_relocs;
2807 qsort (gregdata->reloc_request,
2808 gregdata->n_max_bpo_relocs,
2809 sizeof (struct bpo_reloc_request),
2810 bpo_reloc_request_sort_fn);
2812 /* Recalculate indexes. When we find a change (however unlikely
2813 after the initial iteration), we know we need to relax again,
2814 since items in the GREG-array are sorted by increasing value and
2815 stored in the relaxation phase. */
2816 for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2817 if (gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2820 gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2825 /* Allocate register numbers (indexing from 0). Stop at the first
2827 for (i = 0, regindex = 0, prev_base = gregdata->reloc_request[0].value;
2828 i < gregdata->n_bpo_relocs;
2831 if (gregdata->reloc_request[i].value > prev_base + 255)
2834 prev_base = gregdata->reloc_request[i].value;
2836 gregdata->reloc_request[i].regindex = regindex;
2837 gregdata->reloc_request[i].offset
2838 = gregdata->reloc_request[i].value - prev_base;
2841 /* If it's not the same as the last time, we need to relax again,
2842 because the size of the section has changed. I'm not sure we
2843 actually need to do any adjustments since the shrinking happens
2844 at the start of this section, but better safe than sorry. */
2845 if (gregdata->n_allocated_bpo_gregs != regindex + 1)
2847 gregdata->n_allocated_bpo_gregs = regindex + 1;
2851 bpo_gregs_section->size = (regindex + 1) * 8;
2854 if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2856 if (! link_info->keep_memory)
2860 /* Cache the symbols for elf_link_input_bfd. */
2861 symtab_hdr->contents = (unsigned char *) isymbuf;
2865 if (internal_relocs != NULL
2866 && elf_section_data (sec)->relocs != internal_relocs)
2867 free (internal_relocs);
2869 if (sec->size < size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2872 if (sec->size > size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2874 sec->size = size + mmix_elf_section_data (sec)->pjs.stubs_size_sum;
2881 if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2883 if (internal_relocs != NULL
2884 && elf_section_data (sec)->relocs != internal_relocs)
2885 free (internal_relocs);
2889 #define ELF_ARCH bfd_arch_mmix
2890 #define ELF_MACHINE_CODE EM_MMIX
2892 /* According to mmix-doc page 36 (paragraph 45), this should be (1LL << 48LL).
2893 However, that's too much for something somewhere in the linker part of
2894 BFD; perhaps the start-address has to be a non-zero multiple of this
2895 number, or larger than this number. The symptom is that the linker
2896 complains: "warning: allocated section `.text' not in segment". We
2897 settle for 64k; the page-size used in examples is 8k.
2898 #define ELF_MAXPAGESIZE 0x10000
2900 Unfortunately, this causes excessive padding in the supposedly small
2901 for-education programs that are the expected usage (where people would
2902 inspect output). We stick to 256 bytes just to have *some* default
2904 #define ELF_MAXPAGESIZE 0x100
2906 #define TARGET_BIG_SYM mmix_elf64_vec
2907 #define TARGET_BIG_NAME "elf64-mmix"
2909 #define elf_info_to_howto_rel NULL
2910 #define elf_info_to_howto mmix_info_to_howto_rela
2911 #define elf_backend_relocate_section mmix_elf_relocate_section
2912 #define elf_backend_gc_mark_hook mmix_elf_gc_mark_hook
2913 #define elf_backend_gc_sweep_hook mmix_elf_gc_sweep_hook
2915 #define elf_backend_link_output_symbol_hook \
2916 mmix_elf_link_output_symbol_hook
2917 #define elf_backend_add_symbol_hook mmix_elf_add_symbol_hook
2919 #define elf_backend_check_relocs mmix_elf_check_relocs
2920 #define elf_backend_symbol_processing mmix_elf_symbol_processing
2921 #define elf_backend_omit_section_dynsym \
2922 ((bfd_boolean (*) (bfd *, struct bfd_link_info *, asection *)) bfd_true)
2924 #define bfd_elf64_bfd_is_local_label_name \
2925 mmix_elf_is_local_label_name
2927 #define elf_backend_may_use_rel_p 0
2928 #define elf_backend_may_use_rela_p 1
2929 #define elf_backend_default_use_rela_p 1
2931 #define elf_backend_can_gc_sections 1
2932 #define elf_backend_section_from_bfd_section \
2933 mmix_elf_section_from_bfd_section
2935 #define bfd_elf64_new_section_hook mmix_elf_new_section_hook
2936 #define bfd_elf64_bfd_final_link mmix_elf_final_link
2937 #define bfd_elf64_bfd_relax_section mmix_elf_relax_section
2939 #include "elf64-target.h"