Set dynobj to a normal input file if possible
[external/binutils.git] / bfd / elf64-mmix.c
1 /* MMIX-specific support for 64-bit ELF.
2    Copyright (C) 2001-2016 Free Software Foundation, Inc.
3    Contributed by Hans-Peter Nilsson <hp@bitrange.com>
4
5    This file is part of BFD, the Binary File Descriptor library.
6
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 3 of the License, or
10    (at your option) any later version.
11
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16
17    You should have received a copy of the GNU General Public License
18    along with this program; if not, write to the Free Software
19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20    MA 02110-1301, USA.  */
21
22
23 /* No specific ABI or "processor-specific supplement" defined.  */
24
25 /* TODO:
26    - "Traditional" linker relaxation (shrinking whole sections).
27    - Merge reloc stubs jumping to same location.
28    - GETA stub relaxation (call a stub for out of range new
29      R_MMIX_GETA_STUBBABLE).  */
30
31 #include "sysdep.h"
32 #include "bfd.h"
33 #include "libbfd.h"
34 #include "elf-bfd.h"
35 #include "elf/mmix.h"
36 #include "opcode/mmix.h"
37
38 #define MINUS_ONE       (((bfd_vma) 0) - 1)
39
40 #define MAX_PUSHJ_STUB_SIZE (5 * 4)
41
42 /* Put these everywhere in new code.  */
43 #define FATAL_DEBUG                                             \
44  _bfd_abort (__FILE__, __LINE__,                                \
45              "Internal: Non-debugged code (test-case missing)")
46
47 #define BAD_CASE(x)                             \
48  _bfd_abort (__FILE__, __LINE__,                \
49              "bad case for " #x)
50
51 struct _mmix_elf_section_data
52 {
53   struct bfd_elf_section_data elf;
54   union
55   {
56     struct bpo_reloc_section_info *reloc;
57     struct bpo_greg_section_info *greg;
58   } bpo;
59
60   struct pushj_stub_info
61   {
62     /* Maximum number of stubs needed for this section.  */
63     bfd_size_type n_pushj_relocs;
64
65     /* Size of stubs after a mmix_elf_relax_section round.  */
66     bfd_size_type stubs_size_sum;
67
68     /* Per-reloc stubs_size_sum information.  The stubs_size_sum member is the sum
69        of these.  Allocated in mmix_elf_check_common_relocs.  */
70     bfd_size_type *stub_size;
71
72     /* Offset of next stub during relocation.  Somewhat redundant with the
73        above: error coverage is easier and we don't have to reset the
74        stubs_size_sum for relocation.  */
75     bfd_size_type stub_offset;
76   } pjs;
77
78   /* Whether there has been a warning that this section could not be
79      linked due to a specific cause.  FIXME: a way to access the
80      linker info or output section, then stuff the limiter guard
81      there. */
82   bfd_boolean has_warned_bpo;
83   bfd_boolean has_warned_pushj;
84 };
85
86 #define mmix_elf_section_data(sec) \
87   ((struct _mmix_elf_section_data *) elf_section_data (sec))
88
89 /* For each section containing a base-plus-offset (BPO) reloc, we attach
90    this struct as mmix_elf_section_data (section)->bpo, which is otherwise
91    NULL.  */
92 struct bpo_reloc_section_info
93   {
94     /* The base is 1; this is the first number in this section.  */
95     size_t first_base_plus_offset_reloc;
96
97     /* Number of BPO-relocs in this section.  */
98     size_t n_bpo_relocs_this_section;
99
100     /* Running index, used at relocation time.  */
101     size_t bpo_index;
102
103     /* We don't have access to the bfd_link_info struct in
104        mmix_final_link_relocate.  What we really want to get at is the
105        global single struct greg_relocation, so we stash it here.  */
106     asection *bpo_greg_section;
107   };
108
109 /* Helper struct (in global context) for the one below.
110    There's one of these created for every BPO reloc.  */
111 struct bpo_reloc_request
112   {
113     bfd_vma value;
114
115     /* Valid after relaxation.  The base is 0; the first register number
116        must be added.  The offset is in range 0..255.  */
117     size_t regindex;
118     size_t offset;
119
120     /* The order number for this BPO reloc, corresponding to the order in
121        which BPO relocs were found.  Used to create an index after reloc
122        requests are sorted.  */
123     size_t bpo_reloc_no;
124
125     /* Set when the value is computed.  Better than coding "guard values"
126        into the other members.  Is FALSE only for BPO relocs in a GC:ed
127        section.  */
128     bfd_boolean valid;
129   };
130
131 /* We attach this as mmix_elf_section_data (sec)->bpo in the linker-allocated
132    greg contents section (MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME),
133    which is linked into the register contents section
134    (MMIX_REG_CONTENTS_SECTION_NAME).  This section is created by the
135    linker; using the same hook as for usual with BPO relocs does not
136    collide.  */
137 struct bpo_greg_section_info
138   {
139     /* After GC, this reflects the number of remaining, non-excluded
140        BPO-relocs.  */
141     size_t n_bpo_relocs;
142
143     /* This is the number of allocated bpo_reloc_requests; the size of
144        sorted_indexes.  Valid after the check.*relocs functions are called
145        for all incoming sections.  It includes the number of BPO relocs in
146        sections that were GC:ed.  */
147     size_t n_max_bpo_relocs;
148
149     /* A counter used to find out when to fold the BPO gregs, since we
150        don't have a single "after-relaxation" hook.  */
151     size_t n_remaining_bpo_relocs_this_relaxation_round;
152
153     /* The number of linker-allocated GREGs resulting from BPO relocs.
154        This is an approximation after _bfd_mmix_before_linker_allocation
155        and supposedly accurate after mmix_elf_relax_section is called for
156        all incoming non-collected sections.  */
157     size_t n_allocated_bpo_gregs;
158
159     /* Index into reloc_request[], sorted on increasing "value", secondary
160        by increasing index for strict sorting order.  */
161     size_t *bpo_reloc_indexes;
162
163     /* An array of all relocations, with the "value" member filled in by
164        the relaxation function.  */
165     struct bpo_reloc_request *reloc_request;
166   };
167
168
169 extern bfd_boolean mmix_elf_final_link (bfd *, struct bfd_link_info *);
170
171 extern void mmix_elf_symbol_processing (bfd *, asymbol *);
172
173 /* Only intended to be called from a debugger.  */
174 extern void mmix_dump_bpo_gregs
175   (struct bfd_link_info *, bfd_error_handler_type);
176
177 static void
178 mmix_set_relaxable_size (bfd *, asection *, void *);
179 static bfd_reloc_status_type
180 mmix_elf_reloc (bfd *, arelent *, asymbol *, void *,
181                 asection *, bfd *, char **);
182 static bfd_reloc_status_type
183 mmix_final_link_relocate (reloc_howto_type *, asection *, bfd_byte *, bfd_vma,
184                           bfd_signed_vma, bfd_vma, const char *, asection *,
185                           char **);
186
187
188 /* Watch out: this currently needs to have elements with the same index as
189    their R_MMIX_ number.  */
190 static reloc_howto_type elf_mmix_howto_table[] =
191  {
192   /* This reloc does nothing.  */
193   HOWTO (R_MMIX_NONE,           /* type */
194          0,                     /* rightshift */
195          3,                     /* size (0 = byte, 1 = short, 2 = long) */
196          0,                     /* bitsize */
197          FALSE,                 /* pc_relative */
198          0,                     /* bitpos */
199          complain_overflow_dont, /* complain_on_overflow */
200          bfd_elf_generic_reloc, /* special_function */
201          "R_MMIX_NONE",         /* name */
202          FALSE,                 /* partial_inplace */
203          0,                     /* src_mask */
204          0,                     /* dst_mask */
205          FALSE),                /* pcrel_offset */
206
207   /* An 8 bit absolute relocation.  */
208   HOWTO (R_MMIX_8,              /* type */
209          0,                     /* rightshift */
210          0,                     /* size (0 = byte, 1 = short, 2 = long) */
211          8,                     /* bitsize */
212          FALSE,                 /* pc_relative */
213          0,                     /* bitpos */
214          complain_overflow_bitfield, /* complain_on_overflow */
215          bfd_elf_generic_reloc, /* special_function */
216          "R_MMIX_8",            /* name */
217          FALSE,                 /* partial_inplace */
218          0,                     /* src_mask */
219          0xff,                  /* dst_mask */
220          FALSE),                /* pcrel_offset */
221
222   /* An 16 bit absolute relocation.  */
223   HOWTO (R_MMIX_16,             /* type */
224          0,                     /* rightshift */
225          1,                     /* size (0 = byte, 1 = short, 2 = long) */
226          16,                    /* bitsize */
227          FALSE,                 /* pc_relative */
228          0,                     /* bitpos */
229          complain_overflow_bitfield, /* complain_on_overflow */
230          bfd_elf_generic_reloc, /* special_function */
231          "R_MMIX_16",           /* name */
232          FALSE,                 /* partial_inplace */
233          0,                     /* src_mask */
234          0xffff,                /* dst_mask */
235          FALSE),                /* pcrel_offset */
236
237   /* An 24 bit absolute relocation.  */
238   HOWTO (R_MMIX_24,             /* type */
239          0,                     /* rightshift */
240          2,                     /* size (0 = byte, 1 = short, 2 = long) */
241          24,                    /* bitsize */
242          FALSE,                 /* pc_relative */
243          0,                     /* bitpos */
244          complain_overflow_bitfield, /* complain_on_overflow */
245          bfd_elf_generic_reloc, /* special_function */
246          "R_MMIX_24",           /* name */
247          FALSE,                 /* partial_inplace */
248          ~0xffffff,             /* src_mask */
249          0xffffff,              /* dst_mask */
250          FALSE),                /* pcrel_offset */
251
252   /* A 32 bit absolute relocation.  */
253   HOWTO (R_MMIX_32,             /* type */
254          0,                     /* rightshift */
255          2,                     /* size (0 = byte, 1 = short, 2 = long) */
256          32,                    /* bitsize */
257          FALSE,                 /* pc_relative */
258          0,                     /* bitpos */
259          complain_overflow_bitfield, /* complain_on_overflow */
260          bfd_elf_generic_reloc, /* special_function */
261          "R_MMIX_32",           /* name */
262          FALSE,                 /* partial_inplace */
263          0,                     /* src_mask */
264          0xffffffff,            /* dst_mask */
265          FALSE),                /* pcrel_offset */
266
267   /* 64 bit relocation.  */
268   HOWTO (R_MMIX_64,             /* type */
269          0,                     /* rightshift */
270          4,                     /* size (0 = byte, 1 = short, 2 = long) */
271          64,                    /* bitsize */
272          FALSE,                 /* pc_relative */
273          0,                     /* bitpos */
274          complain_overflow_bitfield, /* complain_on_overflow */
275          bfd_elf_generic_reloc, /* special_function */
276          "R_MMIX_64",           /* name */
277          FALSE,                 /* partial_inplace */
278          0,                     /* src_mask */
279          MINUS_ONE,             /* dst_mask */
280          FALSE),                /* pcrel_offset */
281
282   /* An 8 bit PC-relative relocation.  */
283   HOWTO (R_MMIX_PC_8,           /* type */
284          0,                     /* rightshift */
285          0,                     /* size (0 = byte, 1 = short, 2 = long) */
286          8,                     /* bitsize */
287          TRUE,                  /* pc_relative */
288          0,                     /* bitpos */
289          complain_overflow_bitfield, /* complain_on_overflow */
290          bfd_elf_generic_reloc, /* special_function */
291          "R_MMIX_PC_8",         /* name */
292          FALSE,                 /* partial_inplace */
293          0,                     /* src_mask */
294          0xff,                  /* dst_mask */
295          TRUE),                 /* pcrel_offset */
296
297   /* An 16 bit PC-relative relocation.  */
298   HOWTO (R_MMIX_PC_16,          /* type */
299          0,                     /* rightshift */
300          1,                     /* size (0 = byte, 1 = short, 2 = long) */
301          16,                    /* bitsize */
302          TRUE,                  /* pc_relative */
303          0,                     /* bitpos */
304          complain_overflow_bitfield, /* complain_on_overflow */
305          bfd_elf_generic_reloc, /* special_function */
306          "R_MMIX_PC_16",        /* name */
307          FALSE,                 /* partial_inplace */
308          0,                     /* src_mask */
309          0xffff,                /* dst_mask */
310          TRUE),                 /* pcrel_offset */
311
312   /* An 24 bit PC-relative relocation.  */
313   HOWTO (R_MMIX_PC_24,          /* type */
314          0,                     /* rightshift */
315          2,                     /* size (0 = byte, 1 = short, 2 = long) */
316          24,                    /* bitsize */
317          TRUE,                  /* pc_relative */
318          0,                     /* bitpos */
319          complain_overflow_bitfield, /* complain_on_overflow */
320          bfd_elf_generic_reloc, /* special_function */
321          "R_MMIX_PC_24",        /* name */
322          FALSE,                 /* partial_inplace */
323          ~0xffffff,             /* src_mask */
324          0xffffff,              /* dst_mask */
325          TRUE),                 /* pcrel_offset */
326
327   /* A 32 bit absolute PC-relative relocation.  */
328   HOWTO (R_MMIX_PC_32,          /* type */
329          0,                     /* rightshift */
330          2,                     /* size (0 = byte, 1 = short, 2 = long) */
331          32,                    /* bitsize */
332          TRUE,                  /* pc_relative */
333          0,                     /* bitpos */
334          complain_overflow_bitfield, /* complain_on_overflow */
335          bfd_elf_generic_reloc, /* special_function */
336          "R_MMIX_PC_32",        /* name */
337          FALSE,                 /* partial_inplace */
338          0,                     /* src_mask */
339          0xffffffff,            /* dst_mask */
340          TRUE),                 /* pcrel_offset */
341
342   /* 64 bit PC-relative relocation.  */
343   HOWTO (R_MMIX_PC_64,          /* type */
344          0,                     /* rightshift */
345          4,                     /* size (0 = byte, 1 = short, 2 = long) */
346          64,                    /* bitsize */
347          TRUE,                  /* pc_relative */
348          0,                     /* bitpos */
349          complain_overflow_bitfield, /* complain_on_overflow */
350          bfd_elf_generic_reloc, /* special_function */
351          "R_MMIX_PC_64",        /* name */
352          FALSE,                 /* partial_inplace */
353          0,                     /* src_mask */
354          MINUS_ONE,             /* dst_mask */
355          TRUE),                 /* pcrel_offset */
356
357   /* GNU extension to record C++ vtable hierarchy.  */
358   HOWTO (R_MMIX_GNU_VTINHERIT, /* type */
359          0,                     /* rightshift */
360          0,                     /* size (0 = byte, 1 = short, 2 = long) */
361          0,                     /* bitsize */
362          FALSE,                 /* pc_relative */
363          0,                     /* bitpos */
364          complain_overflow_dont, /* complain_on_overflow */
365          NULL,                  /* special_function */
366          "R_MMIX_GNU_VTINHERIT", /* name */
367          FALSE,                 /* partial_inplace */
368          0,                     /* src_mask */
369          0,                     /* dst_mask */
370          TRUE),                 /* pcrel_offset */
371
372   /* GNU extension to record C++ vtable member usage.  */
373   HOWTO (R_MMIX_GNU_VTENTRY,    /* type */
374          0,                     /* rightshift */
375          0,                     /* size (0 = byte, 1 = short, 2 = long) */
376          0,                     /* bitsize */
377          FALSE,                 /* pc_relative */
378          0,                     /* bitpos */
379          complain_overflow_dont, /* complain_on_overflow */
380          _bfd_elf_rel_vtable_reloc_fn,  /* special_function */
381          "R_MMIX_GNU_VTENTRY", /* name */
382          FALSE,                 /* partial_inplace */
383          0,                     /* src_mask */
384          0,                     /* dst_mask */
385          FALSE),                /* pcrel_offset */
386
387   /* The GETA relocation is supposed to get any address that could
388      possibly be reached by the GETA instruction.  It can silently expand
389      to get a 64-bit operand, but will complain if any of the two least
390      significant bits are set.  The howto members reflect a simple GETA.  */
391   HOWTO (R_MMIX_GETA,           /* type */
392          2,                     /* rightshift */
393          2,                     /* size (0 = byte, 1 = short, 2 = long) */
394          19,                    /* bitsize */
395          TRUE,                  /* pc_relative */
396          0,                     /* bitpos */
397          complain_overflow_signed, /* complain_on_overflow */
398          mmix_elf_reloc,        /* special_function */
399          "R_MMIX_GETA",         /* name */
400          FALSE,                 /* partial_inplace */
401          ~0x0100ffff,           /* src_mask */
402          0x0100ffff,            /* dst_mask */
403          TRUE),                 /* pcrel_offset */
404
405   HOWTO (R_MMIX_GETA_1,         /* type */
406          2,                     /* rightshift */
407          2,                     /* size (0 = byte, 1 = short, 2 = long) */
408          19,                    /* bitsize */
409          TRUE,                  /* pc_relative */
410          0,                     /* bitpos */
411          complain_overflow_signed, /* complain_on_overflow */
412          mmix_elf_reloc,        /* special_function */
413          "R_MMIX_GETA_1",               /* name */
414          FALSE,                 /* partial_inplace */
415          ~0x0100ffff,           /* src_mask */
416          0x0100ffff,            /* dst_mask */
417          TRUE),                 /* pcrel_offset */
418
419   HOWTO (R_MMIX_GETA_2,         /* type */
420          2,                     /* rightshift */
421          2,                     /* size (0 = byte, 1 = short, 2 = long) */
422          19,                    /* bitsize */
423          TRUE,                  /* pc_relative */
424          0,                     /* bitpos */
425          complain_overflow_signed, /* complain_on_overflow */
426          mmix_elf_reloc,        /* special_function */
427          "R_MMIX_GETA_2",               /* name */
428          FALSE,                 /* partial_inplace */
429          ~0x0100ffff,           /* src_mask */
430          0x0100ffff,            /* dst_mask */
431          TRUE),                 /* pcrel_offset */
432
433   HOWTO (R_MMIX_GETA_3,         /* type */
434          2,                     /* rightshift */
435          2,                     /* size (0 = byte, 1 = short, 2 = long) */
436          19,                    /* bitsize */
437          TRUE,                  /* pc_relative */
438          0,                     /* bitpos */
439          complain_overflow_signed, /* complain_on_overflow */
440          mmix_elf_reloc,        /* special_function */
441          "R_MMIX_GETA_3",               /* name */
442          FALSE,                 /* partial_inplace */
443          ~0x0100ffff,           /* src_mask */
444          0x0100ffff,            /* dst_mask */
445          TRUE),                 /* pcrel_offset */
446
447   /* The conditional branches are supposed to reach any (code) address.
448      It can silently expand to a 64-bit operand, but will emit an error if
449      any of the two least significant bits are set.  The howto members
450      reflect a simple branch.  */
451   HOWTO (R_MMIX_CBRANCH,        /* type */
452          2,                     /* rightshift */
453          2,                     /* size (0 = byte, 1 = short, 2 = long) */
454          19,                    /* bitsize */
455          TRUE,                  /* pc_relative */
456          0,                     /* bitpos */
457          complain_overflow_signed, /* complain_on_overflow */
458          mmix_elf_reloc,        /* special_function */
459          "R_MMIX_CBRANCH",      /* name */
460          FALSE,                 /* partial_inplace */
461          ~0x0100ffff,           /* src_mask */
462          0x0100ffff,            /* dst_mask */
463          TRUE),                 /* pcrel_offset */
464
465   HOWTO (R_MMIX_CBRANCH_J,      /* type */
466          2,                     /* rightshift */
467          2,                     /* size (0 = byte, 1 = short, 2 = long) */
468          19,                    /* bitsize */
469          TRUE,                  /* pc_relative */
470          0,                     /* bitpos */
471          complain_overflow_signed, /* complain_on_overflow */
472          mmix_elf_reloc,        /* special_function */
473          "R_MMIX_CBRANCH_J",    /* name */
474          FALSE,                 /* partial_inplace */
475          ~0x0100ffff,           /* src_mask */
476          0x0100ffff,            /* dst_mask */
477          TRUE),                 /* pcrel_offset */
478
479   HOWTO (R_MMIX_CBRANCH_1,      /* type */
480          2,                     /* rightshift */
481          2,                     /* size (0 = byte, 1 = short, 2 = long) */
482          19,                    /* bitsize */
483          TRUE,                  /* pc_relative */
484          0,                     /* bitpos */
485          complain_overflow_signed, /* complain_on_overflow */
486          mmix_elf_reloc,        /* special_function */
487          "R_MMIX_CBRANCH_1",    /* name */
488          FALSE,                 /* partial_inplace */
489          ~0x0100ffff,           /* src_mask */
490          0x0100ffff,            /* dst_mask */
491          TRUE),                 /* pcrel_offset */
492
493   HOWTO (R_MMIX_CBRANCH_2,      /* type */
494          2,                     /* rightshift */
495          2,                     /* size (0 = byte, 1 = short, 2 = long) */
496          19,                    /* bitsize */
497          TRUE,                  /* pc_relative */
498          0,                     /* bitpos */
499          complain_overflow_signed, /* complain_on_overflow */
500          mmix_elf_reloc,        /* special_function */
501          "R_MMIX_CBRANCH_2",    /* name */
502          FALSE,                 /* partial_inplace */
503          ~0x0100ffff,           /* src_mask */
504          0x0100ffff,            /* dst_mask */
505          TRUE),                 /* pcrel_offset */
506
507   HOWTO (R_MMIX_CBRANCH_3,      /* type */
508          2,                     /* rightshift */
509          2,                     /* size (0 = byte, 1 = short, 2 = long) */
510          19,                    /* bitsize */
511          TRUE,                  /* pc_relative */
512          0,                     /* bitpos */
513          complain_overflow_signed, /* complain_on_overflow */
514          mmix_elf_reloc,        /* special_function */
515          "R_MMIX_CBRANCH_3",    /* name */
516          FALSE,                 /* partial_inplace */
517          ~0x0100ffff,           /* src_mask */
518          0x0100ffff,            /* dst_mask */
519          TRUE),                 /* pcrel_offset */
520
521   /* The PUSHJ instruction can reach any (code) address, as long as it's
522      the beginning of a function (no usable restriction).  It can silently
523      expand to a 64-bit operand, but will emit an error if any of the two
524      least significant bits are set.  It can also expand into a call to a
525      stub; see R_MMIX_PUSHJ_STUBBABLE.  The howto members reflect a simple
526      PUSHJ.  */
527   HOWTO (R_MMIX_PUSHJ,          /* type */
528          2,                     /* rightshift */
529          2,                     /* size (0 = byte, 1 = short, 2 = long) */
530          19,                    /* bitsize */
531          TRUE,                  /* pc_relative */
532          0,                     /* bitpos */
533          complain_overflow_signed, /* complain_on_overflow */
534          mmix_elf_reloc,        /* special_function */
535          "R_MMIX_PUSHJ",        /* name */
536          FALSE,                 /* partial_inplace */
537          ~0x0100ffff,           /* src_mask */
538          0x0100ffff,            /* dst_mask */
539          TRUE),                 /* pcrel_offset */
540
541   HOWTO (R_MMIX_PUSHJ_1,        /* type */
542          2,                     /* rightshift */
543          2,                     /* size (0 = byte, 1 = short, 2 = long) */
544          19,                    /* bitsize */
545          TRUE,                  /* pc_relative */
546          0,                     /* bitpos */
547          complain_overflow_signed, /* complain_on_overflow */
548          mmix_elf_reloc,        /* special_function */
549          "R_MMIX_PUSHJ_1",      /* name */
550          FALSE,                 /* partial_inplace */
551          ~0x0100ffff,           /* src_mask */
552          0x0100ffff,            /* dst_mask */
553          TRUE),                 /* pcrel_offset */
554
555   HOWTO (R_MMIX_PUSHJ_2,        /* type */
556          2,                     /* rightshift */
557          2,                     /* size (0 = byte, 1 = short, 2 = long) */
558          19,                    /* bitsize */
559          TRUE,                  /* pc_relative */
560          0,                     /* bitpos */
561          complain_overflow_signed, /* complain_on_overflow */
562          mmix_elf_reloc,        /* special_function */
563          "R_MMIX_PUSHJ_2",      /* name */
564          FALSE,                 /* partial_inplace */
565          ~0x0100ffff,           /* src_mask */
566          0x0100ffff,            /* dst_mask */
567          TRUE),                 /* pcrel_offset */
568
569   HOWTO (R_MMIX_PUSHJ_3,        /* type */
570          2,                     /* rightshift */
571          2,                     /* size (0 = byte, 1 = short, 2 = long) */
572          19,                    /* bitsize */
573          TRUE,                  /* pc_relative */
574          0,                     /* bitpos */
575          complain_overflow_signed, /* complain_on_overflow */
576          mmix_elf_reloc,        /* special_function */
577          "R_MMIX_PUSHJ_3",      /* name */
578          FALSE,                 /* partial_inplace */
579          ~0x0100ffff,           /* src_mask */
580          0x0100ffff,            /* dst_mask */
581          TRUE),                 /* pcrel_offset */
582
583   /* A JMP is supposed to reach any (code) address.  By itself, it can
584      reach +-64M; the expansion can reach all 64 bits.  Note that the 64M
585      limit is soon reached if you link the program in wildly different
586      memory segments.  The howto members reflect a trivial JMP.  */
587   HOWTO (R_MMIX_JMP,            /* type */
588          2,                     /* rightshift */
589          2,                     /* size (0 = byte, 1 = short, 2 = long) */
590          27,                    /* bitsize */
591          TRUE,                  /* pc_relative */
592          0,                     /* bitpos */
593          complain_overflow_signed, /* complain_on_overflow */
594          mmix_elf_reloc,        /* special_function */
595          "R_MMIX_JMP",          /* name */
596          FALSE,                 /* partial_inplace */
597          ~0x1ffffff,            /* src_mask */
598          0x1ffffff,             /* dst_mask */
599          TRUE),                 /* pcrel_offset */
600
601   HOWTO (R_MMIX_JMP_1,          /* type */
602          2,                     /* rightshift */
603          2,                     /* size (0 = byte, 1 = short, 2 = long) */
604          27,                    /* bitsize */
605          TRUE,                  /* pc_relative */
606          0,                     /* bitpos */
607          complain_overflow_signed, /* complain_on_overflow */
608          mmix_elf_reloc,        /* special_function */
609          "R_MMIX_JMP_1",        /* name */
610          FALSE,                 /* partial_inplace */
611          ~0x1ffffff,            /* src_mask */
612          0x1ffffff,             /* dst_mask */
613          TRUE),                 /* pcrel_offset */
614
615   HOWTO (R_MMIX_JMP_2,          /* type */
616          2,                     /* rightshift */
617          2,                     /* size (0 = byte, 1 = short, 2 = long) */
618          27,                    /* bitsize */
619          TRUE,                  /* pc_relative */
620          0,                     /* bitpos */
621          complain_overflow_signed, /* complain_on_overflow */
622          mmix_elf_reloc,        /* special_function */
623          "R_MMIX_JMP_2",        /* name */
624          FALSE,                 /* partial_inplace */
625          ~0x1ffffff,            /* src_mask */
626          0x1ffffff,             /* dst_mask */
627          TRUE),                 /* pcrel_offset */
628
629   HOWTO (R_MMIX_JMP_3,          /* type */
630          2,                     /* rightshift */
631          2,                     /* size (0 = byte, 1 = short, 2 = long) */
632          27,                    /* bitsize */
633          TRUE,                  /* pc_relative */
634          0,                     /* bitpos */
635          complain_overflow_signed, /* complain_on_overflow */
636          mmix_elf_reloc,        /* special_function */
637          "R_MMIX_JMP_3",        /* name */
638          FALSE,                 /* partial_inplace */
639          ~0x1ffffff,            /* src_mask */
640          0x1ffffff,             /* dst_mask */
641          TRUE),                 /* pcrel_offset */
642
643   /* When we don't emit link-time-relaxable code from the assembler, or
644      when relaxation has done all it can do, these relocs are used.  For
645      GETA/PUSHJ/branches.  */
646   HOWTO (R_MMIX_ADDR19,         /* type */
647          2,                     /* rightshift */
648          2,                     /* size (0 = byte, 1 = short, 2 = long) */
649          19,                    /* bitsize */
650          TRUE,                  /* pc_relative */
651          0,                     /* bitpos */
652          complain_overflow_signed, /* complain_on_overflow */
653          mmix_elf_reloc,        /* special_function */
654          "R_MMIX_ADDR19",       /* name */
655          FALSE,                 /* partial_inplace */
656          ~0x0100ffff,           /* src_mask */
657          0x0100ffff,            /* dst_mask */
658          TRUE),                 /* pcrel_offset */
659
660   /* For JMP.  */
661   HOWTO (R_MMIX_ADDR27,         /* type */
662          2,                     /* rightshift */
663          2,                     /* size (0 = byte, 1 = short, 2 = long) */
664          27,                    /* bitsize */
665          TRUE,                  /* pc_relative */
666          0,                     /* bitpos */
667          complain_overflow_signed, /* complain_on_overflow */
668          mmix_elf_reloc,        /* special_function */
669          "R_MMIX_ADDR27",       /* name */
670          FALSE,                 /* partial_inplace */
671          ~0x1ffffff,            /* src_mask */
672          0x1ffffff,             /* dst_mask */
673          TRUE),                 /* pcrel_offset */
674
675   /* A general register or the value 0..255.  If a value, then the
676      instruction (offset -3) needs adjusting.  */
677   HOWTO (R_MMIX_REG_OR_BYTE,    /* type */
678          0,                     /* rightshift */
679          1,                     /* size (0 = byte, 1 = short, 2 = long) */
680          8,                     /* bitsize */
681          FALSE,                 /* pc_relative */
682          0,                     /* bitpos */
683          complain_overflow_bitfield, /* complain_on_overflow */
684          mmix_elf_reloc,        /* special_function */
685          "R_MMIX_REG_OR_BYTE",  /* name */
686          FALSE,                 /* partial_inplace */
687          0,                     /* src_mask */
688          0xff,                  /* dst_mask */
689          FALSE),                /* pcrel_offset */
690
691   /* A general register.  */
692   HOWTO (R_MMIX_REG,            /* type */
693          0,                     /* rightshift */
694          1,                     /* size (0 = byte, 1 = short, 2 = long) */
695          8,                     /* bitsize */
696          FALSE,                 /* pc_relative */
697          0,                     /* bitpos */
698          complain_overflow_bitfield, /* complain_on_overflow */
699          mmix_elf_reloc,        /* special_function */
700          "R_MMIX_REG",          /* name */
701          FALSE,                 /* partial_inplace */
702          0,                     /* src_mask */
703          0xff,                  /* dst_mask */
704          FALSE),                /* pcrel_offset */
705
706   /* A register plus an index, corresponding to the relocation expression.
707      The sizes must correspond to the valid range of the expression, while
708      the bitmasks correspond to what we store in the image.  */
709   HOWTO (R_MMIX_BASE_PLUS_OFFSET,       /* type */
710          0,                     /* rightshift */
711          4,                     /* size (0 = byte, 1 = short, 2 = long) */
712          64,                    /* bitsize */
713          FALSE,                 /* pc_relative */
714          0,                     /* bitpos */
715          complain_overflow_bitfield, /* complain_on_overflow */
716          mmix_elf_reloc,        /* special_function */
717          "R_MMIX_BASE_PLUS_OFFSET", /* name */
718          FALSE,                 /* partial_inplace */
719          0,                     /* src_mask */
720          0xffff,                /* dst_mask */
721          FALSE),                /* pcrel_offset */
722
723   /* A "magic" relocation for a LOCAL expression, asserting that the
724      expression is less than the number of global registers.  No actual
725      modification of the contents is done.  Implementing this as a
726      relocation was less intrusive than e.g. putting such expressions in a
727      section to discard *after* relocation.  */
728   HOWTO (R_MMIX_LOCAL,          /* type */
729          0,                     /* rightshift */
730          0,                     /* size (0 = byte, 1 = short, 2 = long) */
731          0,                     /* bitsize */
732          FALSE,                 /* pc_relative */
733          0,                     /* bitpos */
734          complain_overflow_dont, /* complain_on_overflow */
735          mmix_elf_reloc,        /* special_function */
736          "R_MMIX_LOCAL",        /* name */
737          FALSE,                 /* partial_inplace */
738          0,                     /* src_mask */
739          0,                     /* dst_mask */
740          FALSE),                /* pcrel_offset */
741
742   HOWTO (R_MMIX_PUSHJ_STUBBABLE, /* type */
743          2,                     /* rightshift */
744          2,                     /* size (0 = byte, 1 = short, 2 = long) */
745          19,                    /* bitsize */
746          TRUE,                  /* pc_relative */
747          0,                     /* bitpos */
748          complain_overflow_signed, /* complain_on_overflow */
749          mmix_elf_reloc,        /* special_function */
750          "R_MMIX_PUSHJ_STUBBABLE", /* name */
751          FALSE,                 /* partial_inplace */
752          ~0x0100ffff,           /* src_mask */
753          0x0100ffff,            /* dst_mask */
754          TRUE)                  /* pcrel_offset */
755  };
756
757
758 /* Map BFD reloc types to MMIX ELF reloc types.  */
759
760 struct mmix_reloc_map
761   {
762     bfd_reloc_code_real_type bfd_reloc_val;
763     enum elf_mmix_reloc_type elf_reloc_val;
764   };
765
766
767 static const struct mmix_reloc_map mmix_reloc_map[] =
768   {
769     {BFD_RELOC_NONE, R_MMIX_NONE},
770     {BFD_RELOC_8, R_MMIX_8},
771     {BFD_RELOC_16, R_MMIX_16},
772     {BFD_RELOC_24, R_MMIX_24},
773     {BFD_RELOC_32, R_MMIX_32},
774     {BFD_RELOC_64, R_MMIX_64},
775     {BFD_RELOC_8_PCREL, R_MMIX_PC_8},
776     {BFD_RELOC_16_PCREL, R_MMIX_PC_16},
777     {BFD_RELOC_24_PCREL, R_MMIX_PC_24},
778     {BFD_RELOC_32_PCREL, R_MMIX_PC_32},
779     {BFD_RELOC_64_PCREL, R_MMIX_PC_64},
780     {BFD_RELOC_VTABLE_INHERIT, R_MMIX_GNU_VTINHERIT},
781     {BFD_RELOC_VTABLE_ENTRY, R_MMIX_GNU_VTENTRY},
782     {BFD_RELOC_MMIX_GETA, R_MMIX_GETA},
783     {BFD_RELOC_MMIX_CBRANCH, R_MMIX_CBRANCH},
784     {BFD_RELOC_MMIX_PUSHJ, R_MMIX_PUSHJ},
785     {BFD_RELOC_MMIX_JMP, R_MMIX_JMP},
786     {BFD_RELOC_MMIX_ADDR19, R_MMIX_ADDR19},
787     {BFD_RELOC_MMIX_ADDR27, R_MMIX_ADDR27},
788     {BFD_RELOC_MMIX_REG_OR_BYTE, R_MMIX_REG_OR_BYTE},
789     {BFD_RELOC_MMIX_REG, R_MMIX_REG},
790     {BFD_RELOC_MMIX_BASE_PLUS_OFFSET, R_MMIX_BASE_PLUS_OFFSET},
791     {BFD_RELOC_MMIX_LOCAL, R_MMIX_LOCAL},
792     {BFD_RELOC_MMIX_PUSHJ_STUBBABLE, R_MMIX_PUSHJ_STUBBABLE}
793   };
794
795 static reloc_howto_type *
796 bfd_elf64_bfd_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
797                                  bfd_reloc_code_real_type code)
798 {
799   unsigned int i;
800
801   for (i = 0;
802        i < sizeof (mmix_reloc_map) / sizeof (mmix_reloc_map[0]);
803        i++)
804     {
805       if (mmix_reloc_map[i].bfd_reloc_val == code)
806         return &elf_mmix_howto_table[mmix_reloc_map[i].elf_reloc_val];
807     }
808
809   return NULL;
810 }
811
812 static reloc_howto_type *
813 bfd_elf64_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
814                                  const char *r_name)
815 {
816   unsigned int i;
817
818   for (i = 0;
819        i < sizeof (elf_mmix_howto_table) / sizeof (elf_mmix_howto_table[0]);
820        i++)
821     if (elf_mmix_howto_table[i].name != NULL
822         && strcasecmp (elf_mmix_howto_table[i].name, r_name) == 0)
823       return &elf_mmix_howto_table[i];
824
825   return NULL;
826 }
827
828 static bfd_boolean
829 mmix_elf_new_section_hook (bfd *abfd, asection *sec)
830 {
831   if (!sec->used_by_bfd)
832     {
833       struct _mmix_elf_section_data *sdata;
834       bfd_size_type amt = sizeof (*sdata);
835
836       sdata = bfd_zalloc (abfd, amt);
837       if (sdata == NULL)
838         return FALSE;
839       sec->used_by_bfd = sdata;
840     }
841
842   return _bfd_elf_new_section_hook (abfd, sec);
843 }
844
845
846 /* This function performs the actual bitfiddling and sanity check for a
847    final relocation.  Each relocation gets its *worst*-case expansion
848    in size when it arrives here; any reduction in size should have been
849    caught in linker relaxation earlier.  When we get here, the relocation
850    looks like the smallest instruction with SWYM:s (nop:s) appended to the
851    max size.  We fill in those nop:s.
852
853    R_MMIX_GETA: (FIXME: Relaxation should break this up in 1, 2, 3 tetra)
854     GETA $N,foo
855    ->
856     SETL $N,foo & 0xffff
857     INCML $N,(foo >> 16) & 0xffff
858     INCMH $N,(foo >> 32) & 0xffff
859     INCH $N,(foo >> 48) & 0xffff
860
861    R_MMIX_CBRANCH: (FIXME: Relaxation should break this up, but
862    condbranches needing relaxation might be rare enough to not be
863    worthwhile.)
864     [P]Bcc $N,foo
865    ->
866     [~P]B~cc $N,.+20
867     SETL $255,foo & ...
868     INCML ...
869     INCMH ...
870     INCH ...
871     GO $255,$255,0
872
873    R_MMIX_PUSHJ: (FIXME: Relaxation...)
874     PUSHJ $N,foo
875    ->
876     SETL $255,foo & ...
877     INCML ...
878     INCMH ...
879     INCH ...
880     PUSHGO $N,$255,0
881
882    R_MMIX_JMP: (FIXME: Relaxation...)
883     JMP foo
884    ->
885     SETL $255,foo & ...
886     INCML ...
887     INCMH ...
888     INCH ...
889     GO $255,$255,0
890
891    R_MMIX_ADDR19 and R_MMIX_ADDR27 are just filled in.  */
892
893 static bfd_reloc_status_type
894 mmix_elf_perform_relocation (asection *isec, reloc_howto_type *howto,
895                              void *datap, bfd_vma addr, bfd_vma value,
896                              char **error_message)
897 {
898   bfd *abfd = isec->owner;
899   bfd_reloc_status_type flag = bfd_reloc_ok;
900   bfd_reloc_status_type r;
901   int offs = 0;
902   int reg = 255;
903
904   /* The worst case bits are all similar SETL/INCML/INCMH/INCH sequences.
905      We handle the differences here and the common sequence later.  */
906   switch (howto->type)
907     {
908     case R_MMIX_GETA:
909       offs = 0;
910       reg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
911
912       /* We change to an absolute value.  */
913       value += addr;
914       break;
915
916     case R_MMIX_CBRANCH:
917       {
918         int in1 = bfd_get_16 (abfd, (bfd_byte *) datap) << 16;
919
920         /* Invert the condition and prediction bit, and set the offset
921            to five instructions ahead.
922
923            We *can* do better if we want to.  If the branch is found to be
924            within limits, we could leave the branch as is; there'll just
925            be a bunch of NOP:s after it.  But we shouldn't see this
926            sequence often enough that it's worth doing it.  */
927
928         bfd_put_32 (abfd,
929                     (((in1 ^ ((PRED_INV_BIT | COND_INV_BIT) << 24)) & ~0xffff)
930                      | (24/4)),
931                     (bfd_byte *) datap);
932
933         /* Put a "GO $255,$255,0" after the common sequence.  */
934         bfd_put_32 (abfd,
935                     ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) | 0xffff00,
936                     (bfd_byte *) datap + 20);
937
938         /* Common sequence starts at offset 4.  */
939         offs = 4;
940
941         /* We change to an absolute value.  */
942         value += addr;
943       }
944       break;
945
946     case R_MMIX_PUSHJ_STUBBABLE:
947       /* If the address fits, we're fine.  */
948       if ((value & 3) == 0
949           /* Note rightshift 0; see R_MMIX_JMP case below.  */
950           && (r = bfd_check_overflow (complain_overflow_signed,
951                                       howto->bitsize,
952                                       0,
953                                       bfd_arch_bits_per_address (abfd),
954                                       value)) == bfd_reloc_ok)
955         goto pcrel_mmix_reloc_fits;
956       else
957         {
958           bfd_size_type size = isec->rawsize ? isec->rawsize : isec->size;
959
960           /* We have the bytes at the PUSHJ insn and need to get the
961              position for the stub.  There's supposed to be room allocated
962              for the stub.  */
963           bfd_byte *stubcontents
964             = ((bfd_byte *) datap
965                - (addr - (isec->output_section->vma + isec->output_offset))
966                + size
967                + mmix_elf_section_data (isec)->pjs.stub_offset);
968           bfd_vma stubaddr;
969
970           if (mmix_elf_section_data (isec)->pjs.n_pushj_relocs == 0)
971             {
972               /* This shouldn't happen when linking to ELF or mmo, so
973                  this is an attempt to link to "binary", right?  We
974                  can't access the output bfd, so we can't verify that
975                  assumption.  We only know that the critical
976                  mmix_elf_check_common_relocs has not been called,
977                  which happens when the output format is different
978                  from the input format (and is not mmo).  */
979               if (! mmix_elf_section_data (isec)->has_warned_pushj)
980                 {
981                   /* For the first such error per input section, produce
982                      a verbose message.  */
983                   *error_message
984                     = _("invalid input relocation when producing"
985                         " non-ELF, non-mmo format output."
986                         "\n Please use the objcopy program to convert from"
987                         " ELF or mmo,"
988                         "\n or assemble using"
989                         " \"-no-expand\" (for gcc, \"-Wa,-no-expand\"");
990                   mmix_elf_section_data (isec)->has_warned_pushj = TRUE;
991                   return bfd_reloc_dangerous;
992                 }
993
994               /* For subsequent errors, return this one, which is
995                  rate-limited but looks a little bit different,
996                  hopefully without affecting user-friendliness.  */
997               return bfd_reloc_overflow;
998             }
999
1000           /* The address doesn't fit, so redirect the PUSHJ to the
1001              location of the stub.  */
1002           r = mmix_elf_perform_relocation (isec,
1003                                            &elf_mmix_howto_table
1004                                            [R_MMIX_ADDR19],
1005                                            datap,
1006                                            addr,
1007                                            isec->output_section->vma
1008                                            + isec->output_offset
1009                                            + size
1010                                            + (mmix_elf_section_data (isec)
1011                                               ->pjs.stub_offset)
1012                                            - addr,
1013                                            error_message);
1014           if (r != bfd_reloc_ok)
1015             return r;
1016
1017           stubaddr
1018             = (isec->output_section->vma
1019                + isec->output_offset
1020                + size
1021                + mmix_elf_section_data (isec)->pjs.stub_offset);
1022
1023           /* We generate a simple JMP if that suffices, else the whole 5
1024              insn stub.  */
1025           if (bfd_check_overflow (complain_overflow_signed,
1026                                   elf_mmix_howto_table[R_MMIX_ADDR27].bitsize,
1027                                   0,
1028                                   bfd_arch_bits_per_address (abfd),
1029                                   addr + value - stubaddr) == bfd_reloc_ok)
1030             {
1031               bfd_put_32 (abfd, JMP_INSN_BYTE << 24, stubcontents);
1032               r = mmix_elf_perform_relocation (isec,
1033                                                &elf_mmix_howto_table
1034                                                [R_MMIX_ADDR27],
1035                                                stubcontents,
1036                                                stubaddr,
1037                                                value + addr - stubaddr,
1038                                                error_message);
1039               mmix_elf_section_data (isec)->pjs.stub_offset += 4;
1040
1041               if (size + mmix_elf_section_data (isec)->pjs.stub_offset
1042                   > isec->size)
1043                 abort ();
1044
1045               return r;
1046             }
1047           else
1048             {
1049               /* Put a "GO $255,0" after the common sequence.  */
1050               bfd_put_32 (abfd,
1051                           ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1052                           | 0xff00, (bfd_byte *) stubcontents + 16);
1053
1054               /* Prepare for the general code to set the first part of the
1055                  linker stub, and */
1056               value += addr;
1057               datap = stubcontents;
1058               mmix_elf_section_data (isec)->pjs.stub_offset
1059                 += MAX_PUSHJ_STUB_SIZE;
1060             }
1061         }
1062       break;
1063
1064     case R_MMIX_PUSHJ:
1065       {
1066         int inreg = bfd_get_8 (abfd, (bfd_byte *) datap + 1);
1067
1068         /* Put a "PUSHGO $N,$255,0" after the common sequence.  */
1069         bfd_put_32 (abfd,
1070                     ((PUSHGO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1071                     | (inreg << 16)
1072                     | 0xff00,
1073                     (bfd_byte *) datap + 16);
1074
1075         /* We change to an absolute value.  */
1076         value += addr;
1077       }
1078       break;
1079
1080     case R_MMIX_JMP:
1081       /* This one is a little special.  If we get here on a non-relaxing
1082          link, and the destination is actually in range, we don't need to
1083          execute the nops.
1084          If so, we fall through to the bit-fiddling relocs.
1085
1086          FIXME: bfd_check_overflow seems broken; the relocation is
1087          rightshifted before testing, so supply a zero rightshift.  */
1088
1089       if (! ((value & 3) == 0
1090              && (r = bfd_check_overflow (complain_overflow_signed,
1091                                          howto->bitsize,
1092                                          0,
1093                                          bfd_arch_bits_per_address (abfd),
1094                                          value)) == bfd_reloc_ok))
1095         {
1096           /* If the relocation doesn't fit in a JMP, we let the NOP:s be
1097              modified below, and put a "GO $255,$255,0" after the
1098              address-loading sequence.  */
1099           bfd_put_32 (abfd,
1100                       ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24)
1101                       | 0xffff00,
1102                       (bfd_byte *) datap + 16);
1103
1104           /* We change to an absolute value.  */
1105           value += addr;
1106           break;
1107         }
1108       /* FALLTHROUGH.  */
1109     case R_MMIX_ADDR19:
1110     case R_MMIX_ADDR27:
1111     pcrel_mmix_reloc_fits:
1112       /* These must be in range, or else we emit an error.  */
1113       if ((value & 3) == 0
1114           /* Note rightshift 0; see above.  */
1115           && (r = bfd_check_overflow (complain_overflow_signed,
1116                                       howto->bitsize,
1117                                       0,
1118                                       bfd_arch_bits_per_address (abfd),
1119                                       value)) == bfd_reloc_ok)
1120         {
1121           bfd_vma in1
1122             = bfd_get_32 (abfd, (bfd_byte *) datap);
1123           bfd_vma highbit;
1124
1125           if ((bfd_signed_vma) value < 0)
1126             {
1127               highbit = 1 << 24;
1128               value += (1 << (howto->bitsize - 1));
1129             }
1130           else
1131             highbit = 0;
1132
1133           value >>= 2;
1134
1135           bfd_put_32 (abfd,
1136                       (in1 & howto->src_mask)
1137                       | highbit
1138                       | (value & howto->dst_mask),
1139                       (bfd_byte *) datap);
1140
1141           return bfd_reloc_ok;
1142         }
1143       else
1144         return bfd_reloc_overflow;
1145
1146     case R_MMIX_BASE_PLUS_OFFSET:
1147       {
1148         struct bpo_reloc_section_info *bpodata
1149           = mmix_elf_section_data (isec)->bpo.reloc;
1150         asection *bpo_greg_section;
1151         struct bpo_greg_section_info *gregdata;
1152         size_t bpo_index;
1153
1154         if (bpodata == NULL)
1155           {
1156             /* This shouldn't happen when linking to ELF or mmo, so
1157                this is an attempt to link to "binary", right?  We
1158                can't access the output bfd, so we can't verify that
1159                assumption.  We only know that the critical
1160                mmix_elf_check_common_relocs has not been called, which
1161                happens when the output format is different from the
1162                input format (and is not mmo).  */
1163             if (! mmix_elf_section_data (isec)->has_warned_bpo)
1164               {
1165                 /* For the first such error per input section, produce
1166                    a verbose message.  */
1167                 *error_message
1168                   = _("invalid input relocation when producing"
1169                       " non-ELF, non-mmo format output."
1170                       "\n Please use the objcopy program to convert from"
1171                       " ELF or mmo,"
1172                       "\n or compile using the gcc-option"
1173                       " \"-mno-base-addresses\".");
1174                 mmix_elf_section_data (isec)->has_warned_bpo = TRUE;
1175                 return bfd_reloc_dangerous;
1176               }
1177
1178             /* For subsequent errors, return this one, which is
1179                rate-limited but looks a little bit different,
1180                hopefully without affecting user-friendliness.  */
1181             return bfd_reloc_overflow;
1182           }
1183
1184         bpo_greg_section = bpodata->bpo_greg_section;
1185         gregdata = mmix_elf_section_data (bpo_greg_section)->bpo.greg;
1186         bpo_index = gregdata->bpo_reloc_indexes[bpodata->bpo_index++];
1187
1188         /* A consistency check: The value we now have in "relocation" must
1189            be the same as the value we stored for that relocation.  It
1190            doesn't cost much, so can be left in at all times.  */
1191         if (value != gregdata->reloc_request[bpo_index].value)
1192           {
1193             (*_bfd_error_handler)
1194               (_("%s: Internal inconsistency error for value for\n\
1195  linker-allocated global register: linked: 0x%lx%08lx != relaxed: 0x%lx%08lx\n"),
1196                bfd_get_filename (isec->owner),
1197                (unsigned long) (value >> 32), (unsigned long) value,
1198                (unsigned long) (gregdata->reloc_request[bpo_index].value
1199                                 >> 32),
1200                (unsigned long) gregdata->reloc_request[bpo_index].value);
1201             bfd_set_error (bfd_error_bad_value);
1202             return bfd_reloc_overflow;
1203           }
1204
1205         /* Then store the register number and offset for that register
1206            into datap and datap + 1 respectively.  */
1207         bfd_put_8 (abfd,
1208                    gregdata->reloc_request[bpo_index].regindex
1209                    + bpo_greg_section->output_section->vma / 8,
1210                    datap);
1211         bfd_put_8 (abfd,
1212                    gregdata->reloc_request[bpo_index].offset,
1213                    ((unsigned char *) datap) + 1);
1214         return bfd_reloc_ok;
1215       }
1216
1217     case R_MMIX_REG_OR_BYTE:
1218     case R_MMIX_REG:
1219       if (value > 255)
1220         return bfd_reloc_overflow;
1221       bfd_put_8 (abfd, value, datap);
1222       return bfd_reloc_ok;
1223
1224     default:
1225       BAD_CASE (howto->type);
1226     }
1227
1228   /* This code adds the common SETL/INCML/INCMH/INCH worst-case
1229      sequence.  */
1230
1231   /* Lowest two bits must be 0.  We return bfd_reloc_overflow for
1232      everything that looks strange.  */
1233   if (value & 3)
1234     flag = bfd_reloc_overflow;
1235
1236   bfd_put_32 (abfd,
1237               (SETL_INSN_BYTE << 24) | (value & 0xffff) | (reg << 16),
1238               (bfd_byte *) datap + offs);
1239   bfd_put_32 (abfd,
1240               (INCML_INSN_BYTE << 24) | ((value >> 16) & 0xffff) | (reg << 16),
1241               (bfd_byte *) datap + offs + 4);
1242   bfd_put_32 (abfd,
1243               (INCMH_INSN_BYTE << 24) | ((value >> 32) & 0xffff) | (reg << 16),
1244               (bfd_byte *) datap + offs + 8);
1245   bfd_put_32 (abfd,
1246               (INCH_INSN_BYTE << 24) | ((value >> 48) & 0xffff) | (reg << 16),
1247               (bfd_byte *) datap + offs + 12);
1248
1249   return flag;
1250 }
1251
1252 /* Set the howto pointer for an MMIX ELF reloc (type RELA).  */
1253
1254 static void
1255 mmix_info_to_howto_rela (bfd *abfd ATTRIBUTE_UNUSED,
1256                          arelent *cache_ptr,
1257                          Elf_Internal_Rela *dst)
1258 {
1259   unsigned int r_type;
1260
1261   r_type = ELF64_R_TYPE (dst->r_info);
1262   if (r_type >= (unsigned int) R_MMIX_max)
1263     {
1264       _bfd_error_handler (_("%B: invalid MMIX reloc number: %d"), abfd, r_type);
1265       r_type = 0;
1266     }
1267   cache_ptr->howto = &elf_mmix_howto_table[r_type];
1268 }
1269
1270 /* Any MMIX-specific relocation gets here at assembly time or when linking
1271    to other formats (such as mmo); this is the relocation function from
1272    the reloc_table.  We don't get here for final pure ELF linking.  */
1273
1274 static bfd_reloc_status_type
1275 mmix_elf_reloc (bfd *abfd,
1276                 arelent *reloc_entry,
1277                 asymbol *symbol,
1278                 void * data,
1279                 asection *input_section,
1280                 bfd *output_bfd,
1281                 char **error_message)
1282 {
1283   bfd_vma relocation;
1284   bfd_reloc_status_type r;
1285   asection *reloc_target_output_section;
1286   bfd_reloc_status_type flag = bfd_reloc_ok;
1287   bfd_vma output_base = 0;
1288
1289   r = bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data,
1290                              input_section, output_bfd, error_message);
1291
1292   /* If that was all that was needed (i.e. this isn't a final link, only
1293      some segment adjustments), we're done.  */
1294   if (r != bfd_reloc_continue)
1295     return r;
1296
1297   if (bfd_is_und_section (symbol->section)
1298       && (symbol->flags & BSF_WEAK) == 0
1299       && output_bfd == (bfd *) NULL)
1300     return bfd_reloc_undefined;
1301
1302   /* Is the address of the relocation really within the section?  */
1303   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1304     return bfd_reloc_outofrange;
1305
1306   /* Work out which section the relocation is targeted at and the
1307      initial relocation command value.  */
1308
1309   /* Get symbol value.  (Common symbols are special.)  */
1310   if (bfd_is_com_section (symbol->section))
1311     relocation = 0;
1312   else
1313     relocation = symbol->value;
1314
1315   reloc_target_output_section = bfd_get_output_section (symbol);
1316
1317   /* Here the variable relocation holds the final address of the symbol we
1318      are relocating against, plus any addend.  */
1319   if (output_bfd)
1320     output_base = 0;
1321   else
1322     output_base = reloc_target_output_section->vma;
1323
1324   relocation += output_base + symbol->section->output_offset;
1325
1326   if (output_bfd != (bfd *) NULL)
1327     {
1328       /* Add in supplied addend.  */
1329       relocation += reloc_entry->addend;
1330
1331       /* This is a partial relocation, and we want to apply the
1332          relocation to the reloc entry rather than the raw data.
1333          Modify the reloc inplace to reflect what we now know.  */
1334       reloc_entry->addend = relocation;
1335       reloc_entry->address += input_section->output_offset;
1336       return flag;
1337     }
1338
1339   return mmix_final_link_relocate (reloc_entry->howto, input_section,
1340                                    data, reloc_entry->address,
1341                                    reloc_entry->addend, relocation,
1342                                    bfd_asymbol_name (symbol),
1343                                    reloc_target_output_section,
1344                                    error_message);
1345 }
1346 \f
1347 /* Relocate an MMIX ELF section.  Modified from elf32-fr30.c; look to it
1348    for guidance if you're thinking of copying this.  */
1349
1350 static bfd_boolean
1351 mmix_elf_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED,
1352                            struct bfd_link_info *info,
1353                            bfd *input_bfd,
1354                            asection *input_section,
1355                            bfd_byte *contents,
1356                            Elf_Internal_Rela *relocs,
1357                            Elf_Internal_Sym *local_syms,
1358                            asection **local_sections)
1359 {
1360   Elf_Internal_Shdr *symtab_hdr;
1361   struct elf_link_hash_entry **sym_hashes;
1362   Elf_Internal_Rela *rel;
1363   Elf_Internal_Rela *relend;
1364   bfd_size_type size;
1365   size_t pjsno = 0;
1366
1367   size = input_section->rawsize ? input_section->rawsize : input_section->size;
1368   symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
1369   sym_hashes = elf_sym_hashes (input_bfd);
1370   relend = relocs + input_section->reloc_count;
1371
1372   /* Zero the stub area before we start.  */
1373   if (input_section->rawsize != 0
1374       && input_section->size > input_section->rawsize)
1375     memset (contents + input_section->rawsize, 0,
1376             input_section->size - input_section->rawsize);
1377
1378   for (rel = relocs; rel < relend; rel ++)
1379     {
1380       reloc_howto_type *howto;
1381       unsigned long r_symndx;
1382       Elf_Internal_Sym *sym;
1383       asection *sec;
1384       struct elf_link_hash_entry *h;
1385       bfd_vma relocation;
1386       bfd_reloc_status_type r;
1387       const char *name = NULL;
1388       int r_type;
1389       bfd_boolean undefined_signalled = FALSE;
1390
1391       r_type = ELF64_R_TYPE (rel->r_info);
1392
1393       if (r_type == R_MMIX_GNU_VTINHERIT
1394           || r_type == R_MMIX_GNU_VTENTRY)
1395         continue;
1396
1397       r_symndx = ELF64_R_SYM (rel->r_info);
1398
1399       howto = elf_mmix_howto_table + ELF64_R_TYPE (rel->r_info);
1400       h = NULL;
1401       sym = NULL;
1402       sec = NULL;
1403
1404       if (r_symndx < symtab_hdr->sh_info)
1405         {
1406           sym = local_syms + r_symndx;
1407           sec = local_sections [r_symndx];
1408           relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
1409
1410           name = bfd_elf_string_from_elf_section (input_bfd,
1411                                                   symtab_hdr->sh_link,
1412                                                   sym->st_name);
1413           if (name == NULL)
1414             name = bfd_section_name (input_bfd, sec);
1415         }
1416       else
1417         {
1418           bfd_boolean unresolved_reloc, ignored;
1419
1420           RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
1421                                    r_symndx, symtab_hdr, sym_hashes,
1422                                    h, sec, relocation,
1423                                    unresolved_reloc, undefined_signalled,
1424                                    ignored);
1425           name = h->root.root.string;
1426         }
1427
1428       if (sec != NULL && discarded_section (sec))
1429         RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
1430                                          rel, 1, relend, howto, 0, contents);
1431
1432       if (bfd_link_relocatable (info))
1433         {
1434           /* This is a relocatable link.  For most relocs we don't have to
1435              change anything, unless the reloc is against a section
1436              symbol, in which case we have to adjust according to where
1437              the section symbol winds up in the output section.  */
1438           if (sym != NULL && ELF_ST_TYPE (sym->st_info) == STT_SECTION)
1439             rel->r_addend += sec->output_offset;
1440
1441           /* For PUSHJ stub relocs however, we may need to change the
1442              reloc and the section contents, if the reloc doesn't reach
1443              beyond the end of the output section and previous stubs.
1444              Then we change the section contents to be a PUSHJ to the end
1445              of the input section plus stubs (we can do that without using
1446              a reloc), and then we change the reloc to be a R_MMIX_PUSHJ
1447              at the stub location.  */
1448           if (r_type == R_MMIX_PUSHJ_STUBBABLE)
1449             {
1450               /* We've already checked whether we need a stub; use that
1451                  knowledge.  */
1452               if (mmix_elf_section_data (input_section)->pjs.stub_size[pjsno]
1453                   != 0)
1454                 {
1455                   Elf_Internal_Rela relcpy;
1456
1457                   if (mmix_elf_section_data (input_section)
1458                       ->pjs.stub_size[pjsno] != MAX_PUSHJ_STUB_SIZE)
1459                     abort ();
1460
1461                   /* There's already a PUSHJ insn there, so just fill in
1462                      the offset bits to the stub.  */
1463                   if (mmix_final_link_relocate (elf_mmix_howto_table
1464                                                 + R_MMIX_ADDR19,
1465                                                 input_section,
1466                                                 contents,
1467                                                 rel->r_offset,
1468                                                 0,
1469                                                 input_section
1470                                                 ->output_section->vma
1471                                                 + input_section->output_offset
1472                                                 + size
1473                                                 + mmix_elf_section_data (input_section)
1474                                                 ->pjs.stub_offset,
1475                                                 NULL, NULL, NULL) != bfd_reloc_ok)
1476                     return FALSE;
1477
1478                   /* Put a JMP insn at the stub; it goes with the
1479                      R_MMIX_JMP reloc.  */
1480                   bfd_put_32 (output_bfd, JMP_INSN_BYTE << 24,
1481                               contents
1482                               + size
1483                               + mmix_elf_section_data (input_section)
1484                               ->pjs.stub_offset);
1485
1486                   /* Change the reloc to be at the stub, and to a full
1487                      R_MMIX_JMP reloc.  */
1488                   rel->r_info = ELF64_R_INFO (r_symndx, R_MMIX_JMP);
1489                   rel->r_offset
1490                     = (size
1491                        + mmix_elf_section_data (input_section)
1492                        ->pjs.stub_offset);
1493
1494                   mmix_elf_section_data (input_section)->pjs.stub_offset
1495                     += MAX_PUSHJ_STUB_SIZE;
1496
1497                   /* Shift this reloc to the end of the relocs to maintain
1498                      the r_offset sorted reloc order.  */
1499                   relcpy = *rel;
1500                   memmove (rel, rel + 1, (char *) relend - (char *) rel);
1501                   relend[-1] = relcpy;
1502
1503                   /* Back up one reloc, or else we'd skip the next reloc
1504                    in turn.  */
1505                   rel--;
1506                 }
1507
1508               pjsno++;
1509             }
1510           continue;
1511         }
1512
1513       r = mmix_final_link_relocate (howto, input_section,
1514                                     contents, rel->r_offset,
1515                                     rel->r_addend, relocation, name, sec, NULL);
1516
1517       if (r != bfd_reloc_ok)
1518         {
1519           bfd_boolean check_ok = TRUE;
1520           const char * msg = (const char *) NULL;
1521
1522           switch (r)
1523             {
1524             case bfd_reloc_overflow:
1525               check_ok = info->callbacks->reloc_overflow
1526                 (info, (h ? &h->root : NULL), name, howto->name,
1527                  (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
1528               break;
1529
1530             case bfd_reloc_undefined:
1531               /* We may have sent this message above.  */
1532               if (! undefined_signalled)
1533                 check_ok = info->callbacks->undefined_symbol
1534                   (info, name, input_bfd, input_section, rel->r_offset,
1535                    TRUE);
1536               undefined_signalled = TRUE;
1537               break;
1538
1539             case bfd_reloc_outofrange:
1540               msg = _("internal error: out of range error");
1541               break;
1542
1543             case bfd_reloc_notsupported:
1544               msg = _("internal error: unsupported relocation error");
1545               break;
1546
1547             case bfd_reloc_dangerous:
1548               msg = _("internal error: dangerous relocation");
1549               break;
1550
1551             default:
1552               msg = _("internal error: unknown error");
1553               break;
1554             }
1555
1556           if (msg)
1557             check_ok = info->callbacks->warning
1558               (info, msg, name, input_bfd, input_section, rel->r_offset);
1559
1560           if (! check_ok)
1561             return FALSE;
1562         }
1563     }
1564
1565   return TRUE;
1566 }
1567 \f
1568 /* Perform a single relocation.  By default we use the standard BFD
1569    routines.  A few relocs we have to do ourselves.  */
1570
1571 static bfd_reloc_status_type
1572 mmix_final_link_relocate (reloc_howto_type *howto, asection *input_section,
1573                           bfd_byte *contents, bfd_vma r_offset,
1574                           bfd_signed_vma r_addend, bfd_vma relocation,
1575                           const char *symname, asection *symsec,
1576                           char **error_message)
1577 {
1578   bfd_reloc_status_type r = bfd_reloc_ok;
1579   bfd_vma addr
1580     = (input_section->output_section->vma
1581        + input_section->output_offset
1582        + r_offset);
1583   bfd_signed_vma srel
1584     = (bfd_signed_vma) relocation + r_addend;
1585
1586   switch (howto->type)
1587     {
1588       /* All these are PC-relative.  */
1589     case R_MMIX_PUSHJ_STUBBABLE:
1590     case R_MMIX_PUSHJ:
1591     case R_MMIX_CBRANCH:
1592     case R_MMIX_ADDR19:
1593     case R_MMIX_GETA:
1594     case R_MMIX_ADDR27:
1595     case R_MMIX_JMP:
1596       contents += r_offset;
1597
1598       srel -= (input_section->output_section->vma
1599                + input_section->output_offset
1600                + r_offset);
1601
1602       r = mmix_elf_perform_relocation (input_section, howto, contents,
1603                                        addr, srel, error_message);
1604       break;
1605
1606     case R_MMIX_BASE_PLUS_OFFSET:
1607       if (symsec == NULL)
1608         return bfd_reloc_undefined;
1609
1610       /* Check that we're not relocating against a register symbol.  */
1611       if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1612                   MMIX_REG_CONTENTS_SECTION_NAME) == 0
1613           || strcmp (bfd_get_section_name (symsec->owner, symsec),
1614                      MMIX_REG_SECTION_NAME) == 0)
1615         {
1616           /* Note: This is separated out into two messages in order
1617              to ease the translation into other languages.  */
1618           if (symname == NULL || *symname == 0)
1619             (*_bfd_error_handler)
1620               (_("%s: base-plus-offset relocation against register symbol: (unknown) in %s"),
1621                bfd_get_filename (input_section->owner),
1622                bfd_get_section_name (symsec->owner, symsec));
1623           else
1624             (*_bfd_error_handler)
1625               (_("%s: base-plus-offset relocation against register symbol: %s in %s"),
1626                bfd_get_filename (input_section->owner), symname,
1627                bfd_get_section_name (symsec->owner, symsec));
1628           return bfd_reloc_overflow;
1629         }
1630       goto do_mmix_reloc;
1631
1632     case R_MMIX_REG_OR_BYTE:
1633     case R_MMIX_REG:
1634       /* For now, we handle these alike.  They must refer to an register
1635          symbol, which is either relative to the register section and in
1636          the range 0..255, or is in the register contents section with vma
1637          regno * 8.  */
1638
1639       /* FIXME: A better way to check for reg contents section?
1640          FIXME: Postpone section->scaling to mmix_elf_perform_relocation? */
1641       if (symsec == NULL)
1642         return bfd_reloc_undefined;
1643
1644       if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1645                   MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1646         {
1647           if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1648             {
1649               /* The bfd_reloc_outofrange return value, though intuitively
1650                  a better value, will not get us an error.  */
1651               return bfd_reloc_overflow;
1652             }
1653           srel /= 8;
1654         }
1655       else if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1656                        MMIX_REG_SECTION_NAME) == 0)
1657         {
1658           if (srel < 0 || srel > 255)
1659             /* The bfd_reloc_outofrange return value, though intuitively a
1660                better value, will not get us an error.  */
1661             return bfd_reloc_overflow;
1662         }
1663       else
1664         {
1665           /* Note: This is separated out into two messages in order
1666              to ease the translation into other languages.  */
1667           if (symname == NULL || *symname == 0)
1668             (*_bfd_error_handler)
1669               (_("%s: register relocation against non-register symbol: (unknown) in %s"),
1670                bfd_get_filename (input_section->owner),
1671                bfd_get_section_name (symsec->owner, symsec));
1672           else
1673             (*_bfd_error_handler)
1674               (_("%s: register relocation against non-register symbol: %s in %s"),
1675                bfd_get_filename (input_section->owner), symname,
1676                bfd_get_section_name (symsec->owner, symsec));
1677
1678           /* The bfd_reloc_outofrange return value, though intuitively a
1679              better value, will not get us an error.  */
1680           return bfd_reloc_overflow;
1681         }
1682     do_mmix_reloc:
1683       contents += r_offset;
1684       r = mmix_elf_perform_relocation (input_section, howto, contents,
1685                                        addr, srel, error_message);
1686       break;
1687
1688     case R_MMIX_LOCAL:
1689       /* This isn't a real relocation, it's just an assertion that the
1690          final relocation value corresponds to a local register.  We
1691          ignore the actual relocation; nothing is changed.  */
1692       {
1693         asection *regsec
1694           = bfd_get_section_by_name (input_section->output_section->owner,
1695                                      MMIX_REG_CONTENTS_SECTION_NAME);
1696         bfd_vma first_global;
1697
1698         /* Check that this is an absolute value, or a reference to the
1699            register contents section or the register (symbol) section.
1700            Absolute numbers can get here as undefined section.  Undefined
1701            symbols are signalled elsewhere, so there's no conflict in us
1702            accidentally handling it.  */
1703         if (!bfd_is_abs_section (symsec)
1704             && !bfd_is_und_section (symsec)
1705             && strcmp (bfd_get_section_name (symsec->owner, symsec),
1706                        MMIX_REG_CONTENTS_SECTION_NAME) != 0
1707             && strcmp (bfd_get_section_name (symsec->owner, symsec),
1708                        MMIX_REG_SECTION_NAME) != 0)
1709         {
1710           (*_bfd_error_handler)
1711             (_("%s: directive LOCAL valid only with a register or absolute value"),
1712              bfd_get_filename (input_section->owner));
1713
1714           return bfd_reloc_overflow;
1715         }
1716
1717       /* If we don't have a register contents section, then $255 is the
1718          first global register.  */
1719       if (regsec == NULL)
1720         first_global = 255;
1721       else
1722         {
1723           first_global
1724             = bfd_get_section_vma (input_section->output_section->owner,
1725                                    regsec) / 8;
1726           if (strcmp (bfd_get_section_name (symsec->owner, symsec),
1727                       MMIX_REG_CONTENTS_SECTION_NAME) == 0)
1728             {
1729               if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8)
1730                 /* The bfd_reloc_outofrange return value, though
1731                    intuitively a better value, will not get us an error.  */
1732                 return bfd_reloc_overflow;
1733               srel /= 8;
1734             }
1735         }
1736
1737         if ((bfd_vma) srel >= first_global)
1738           {
1739             /* FIXME: Better error message.  */
1740             (*_bfd_error_handler)
1741               (_("%s: LOCAL directive: Register $%ld is not a local register.  First global register is $%ld."),
1742                bfd_get_filename (input_section->owner), (long) srel, (long) first_global);
1743
1744             return bfd_reloc_overflow;
1745           }
1746       }
1747       r = bfd_reloc_ok;
1748       break;
1749
1750     default:
1751       r = _bfd_final_link_relocate (howto, input_section->owner, input_section,
1752                                     contents, r_offset,
1753                                     relocation, r_addend);
1754     }
1755
1756   return r;
1757 }
1758 \f
1759 /* Return the section that should be marked against GC for a given
1760    relocation.  */
1761
1762 static asection *
1763 mmix_elf_gc_mark_hook (asection *sec,
1764                        struct bfd_link_info *info,
1765                        Elf_Internal_Rela *rel,
1766                        struct elf_link_hash_entry *h,
1767                        Elf_Internal_Sym *sym)
1768 {
1769   if (h != NULL)
1770     switch (ELF64_R_TYPE (rel->r_info))
1771       {
1772       case R_MMIX_GNU_VTINHERIT:
1773       case R_MMIX_GNU_VTENTRY:
1774         return NULL;
1775       }
1776
1777   return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym);
1778 }
1779
1780 /* Update relocation info for a GC-excluded section.  We could supposedly
1781    perform the allocation after GC, but there's no suitable hook between
1782    GC (or section merge) and the point when all input sections must be
1783    present.  Better to waste some memory and (perhaps) a little time.  */
1784
1785 static bfd_boolean
1786 mmix_elf_gc_sweep_hook (bfd *abfd ATTRIBUTE_UNUSED,
1787                         struct bfd_link_info *info ATTRIBUTE_UNUSED,
1788                         asection *sec,
1789                         const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED)
1790 {
1791   struct bpo_reloc_section_info *bpodata
1792     = mmix_elf_section_data (sec)->bpo.reloc;
1793   asection *allocated_gregs_section;
1794
1795   /* If no bpodata here, we have nothing to do.  */
1796   if (bpodata == NULL)
1797     return TRUE;
1798
1799   allocated_gregs_section = bpodata->bpo_greg_section;
1800
1801   mmix_elf_section_data (allocated_gregs_section)->bpo.greg->n_bpo_relocs
1802     -= bpodata->n_bpo_relocs_this_section;
1803
1804   return TRUE;
1805 }
1806 \f
1807 /* Sort register relocs to come before expanding relocs.  */
1808
1809 static int
1810 mmix_elf_sort_relocs (const void * p1, const void * p2)
1811 {
1812   const Elf_Internal_Rela *r1 = (const Elf_Internal_Rela *) p1;
1813   const Elf_Internal_Rela *r2 = (const Elf_Internal_Rela *) p2;
1814   int r1_is_reg, r2_is_reg;
1815
1816   /* Sort primarily on r_offset & ~3, so relocs are done to consecutive
1817      insns.  */
1818   if ((r1->r_offset & ~(bfd_vma) 3) > (r2->r_offset & ~(bfd_vma) 3))
1819     return 1;
1820   else if ((r1->r_offset & ~(bfd_vma) 3) < (r2->r_offset & ~(bfd_vma) 3))
1821     return -1;
1822
1823   r1_is_reg
1824     = (ELF64_R_TYPE (r1->r_info) == R_MMIX_REG_OR_BYTE
1825        || ELF64_R_TYPE (r1->r_info) == R_MMIX_REG);
1826   r2_is_reg
1827     = (ELF64_R_TYPE (r2->r_info) == R_MMIX_REG_OR_BYTE
1828        || ELF64_R_TYPE (r2->r_info) == R_MMIX_REG);
1829   if (r1_is_reg != r2_is_reg)
1830     return r2_is_reg - r1_is_reg;
1831
1832   /* Neither or both are register relocs.  Then sort on full offset.  */
1833   if (r1->r_offset > r2->r_offset)
1834     return 1;
1835   else if (r1->r_offset < r2->r_offset)
1836     return -1;
1837   return 0;
1838 }
1839
1840 /* Subset of mmix_elf_check_relocs, common to ELF and mmo linking.  */
1841
1842 static bfd_boolean
1843 mmix_elf_check_common_relocs  (bfd *abfd,
1844                                struct bfd_link_info *info,
1845                                asection *sec,
1846                                const Elf_Internal_Rela *relocs)
1847 {
1848   bfd *bpo_greg_owner = NULL;
1849   asection *allocated_gregs_section = NULL;
1850   struct bpo_greg_section_info *gregdata = NULL;
1851   struct bpo_reloc_section_info *bpodata = NULL;
1852   const Elf_Internal_Rela *rel;
1853   const Elf_Internal_Rela *rel_end;
1854
1855   /* We currently have to abuse this COFF-specific member, since there's
1856      no target-machine-dedicated member.  There's no alternative outside
1857      the bfd_link_info struct; we can't specialize a hash-table since
1858      they're different between ELF and mmo.  */
1859   bpo_greg_owner = (bfd *) info->base_file;
1860
1861   rel_end = relocs + sec->reloc_count;
1862   for (rel = relocs; rel < rel_end; rel++)
1863     {
1864       switch (ELF64_R_TYPE (rel->r_info))
1865         {
1866           /* This relocation causes a GREG allocation.  We need to count
1867              them, and we need to create a section for them, so we need an
1868              object to fake as the owner of that section.  We can't use
1869              the ELF dynobj for this, since the ELF bits assume lots of
1870              DSO-related stuff if that member is non-NULL.  */
1871         case R_MMIX_BASE_PLUS_OFFSET:
1872           /* We don't do anything with this reloc for a relocatable link.  */
1873           if (bfd_link_relocatable (info))
1874             break;
1875
1876           if (bpo_greg_owner == NULL)
1877             {
1878               bpo_greg_owner = abfd;
1879               info->base_file = bpo_greg_owner;
1880             }
1881
1882           if (allocated_gregs_section == NULL)
1883             allocated_gregs_section
1884               = bfd_get_section_by_name (bpo_greg_owner,
1885                                          MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
1886
1887           if (allocated_gregs_section == NULL)
1888             {
1889               allocated_gregs_section
1890                 = bfd_make_section_with_flags (bpo_greg_owner,
1891                                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME,
1892                                                (SEC_HAS_CONTENTS
1893                                                 | SEC_IN_MEMORY
1894                                                 | SEC_LINKER_CREATED));
1895               /* Setting both SEC_ALLOC and SEC_LOAD means the section is
1896                  treated like any other section, and we'd get errors for
1897                  address overlap with the text section.  Let's set none of
1898                  those flags, as that is what currently happens for usual
1899                  GREG allocations, and that works.  */
1900               if (allocated_gregs_section == NULL
1901                   || !bfd_set_section_alignment (bpo_greg_owner,
1902                                                  allocated_gregs_section,
1903                                                  3))
1904                 return FALSE;
1905
1906               gregdata = (struct bpo_greg_section_info *)
1907                 bfd_zalloc (bpo_greg_owner, sizeof (struct bpo_greg_section_info));
1908               if (gregdata == NULL)
1909                 return FALSE;
1910               mmix_elf_section_data (allocated_gregs_section)->bpo.greg
1911                 = gregdata;
1912             }
1913           else if (gregdata == NULL)
1914             gregdata
1915               = mmix_elf_section_data (allocated_gregs_section)->bpo.greg;
1916
1917           /* Get ourselves some auxiliary info for the BPO-relocs.  */
1918           if (bpodata == NULL)
1919             {
1920               /* No use doing a separate iteration pass to find the upper
1921                  limit - just use the number of relocs.  */
1922               bpodata = (struct bpo_reloc_section_info *)
1923                 bfd_alloc (bpo_greg_owner,
1924                            sizeof (struct bpo_reloc_section_info)
1925                            * (sec->reloc_count + 1));
1926               if (bpodata == NULL)
1927                 return FALSE;
1928               mmix_elf_section_data (sec)->bpo.reloc = bpodata;
1929               bpodata->first_base_plus_offset_reloc
1930                 = bpodata->bpo_index
1931                 = gregdata->n_max_bpo_relocs;
1932               bpodata->bpo_greg_section
1933                 = allocated_gregs_section;
1934               bpodata->n_bpo_relocs_this_section = 0;
1935             }
1936
1937           bpodata->n_bpo_relocs_this_section++;
1938           gregdata->n_max_bpo_relocs++;
1939
1940           /* We don't get another chance to set this before GC; we've not
1941              set up any hook that runs before GC.  */
1942           gregdata->n_bpo_relocs
1943             = gregdata->n_max_bpo_relocs;
1944           break;
1945
1946         case R_MMIX_PUSHJ_STUBBABLE:
1947           mmix_elf_section_data (sec)->pjs.n_pushj_relocs++;
1948           break;
1949         }
1950     }
1951
1952   /* Allocate per-reloc stub storage and initialize it to the max stub
1953      size.  */
1954   if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs != 0)
1955     {
1956       size_t i;
1957
1958       mmix_elf_section_data (sec)->pjs.stub_size
1959         = bfd_alloc (abfd, mmix_elf_section_data (sec)->pjs.n_pushj_relocs
1960                      * sizeof (mmix_elf_section_data (sec)
1961                                ->pjs.stub_size[0]));
1962       if (mmix_elf_section_data (sec)->pjs.stub_size == NULL)
1963         return FALSE;
1964
1965       for (i = 0; i < mmix_elf_section_data (sec)->pjs.n_pushj_relocs; i++)
1966         mmix_elf_section_data (sec)->pjs.stub_size[i] = MAX_PUSHJ_STUB_SIZE;
1967     }
1968
1969   return TRUE;
1970 }
1971
1972 /* Look through the relocs for a section during the first phase.  */
1973
1974 static bfd_boolean
1975 mmix_elf_check_relocs (bfd *abfd,
1976                        struct bfd_link_info *info,
1977                        asection *sec,
1978                        const Elf_Internal_Rela *relocs)
1979 {
1980   Elf_Internal_Shdr *symtab_hdr;
1981   struct elf_link_hash_entry **sym_hashes;
1982   const Elf_Internal_Rela *rel;
1983   const Elf_Internal_Rela *rel_end;
1984
1985   symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
1986   sym_hashes = elf_sym_hashes (abfd);
1987
1988   /* First we sort the relocs so that any register relocs come before
1989      expansion-relocs to the same insn.  FIXME: Not done for mmo.  */
1990   qsort ((void *) relocs, sec->reloc_count, sizeof (Elf_Internal_Rela),
1991          mmix_elf_sort_relocs);
1992
1993   /* Do the common part.  */
1994   if (!mmix_elf_check_common_relocs (abfd, info, sec, relocs))
1995     return FALSE;
1996
1997   if (bfd_link_relocatable (info))
1998     return TRUE;
1999
2000   rel_end = relocs + sec->reloc_count;
2001   for (rel = relocs; rel < rel_end; rel++)
2002     {
2003       struct elf_link_hash_entry *h;
2004       unsigned long r_symndx;
2005
2006       r_symndx = ELF64_R_SYM (rel->r_info);
2007       if (r_symndx < symtab_hdr->sh_info)
2008         h = NULL;
2009       else
2010         {
2011           h = sym_hashes[r_symndx - symtab_hdr->sh_info];
2012           while (h->root.type == bfd_link_hash_indirect
2013                  || h->root.type == bfd_link_hash_warning)
2014             h = (struct elf_link_hash_entry *) h->root.u.i.link;
2015
2016           /* PR15323, ref flags aren't set for references in the same
2017              object.  */
2018           h->root.non_ir_ref = 1;
2019         }
2020
2021       switch (ELF64_R_TYPE (rel->r_info))
2022         {
2023         /* This relocation describes the C++ object vtable hierarchy.
2024            Reconstruct it for later use during GC.  */
2025         case R_MMIX_GNU_VTINHERIT:
2026           if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset))
2027             return FALSE;
2028           break;
2029
2030         /* This relocation describes which C++ vtable entries are actually
2031            used.  Record for later use during GC.  */
2032         case R_MMIX_GNU_VTENTRY:
2033           BFD_ASSERT (h != NULL);
2034           if (h != NULL
2035               && !bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend))
2036             return FALSE;
2037           break;
2038         }
2039     }
2040
2041   return TRUE;
2042 }
2043
2044 /* Wrapper for mmix_elf_check_common_relocs, called when linking to mmo.
2045    Copied from elf_link_add_object_symbols.  */
2046
2047 bfd_boolean
2048 _bfd_mmix_check_all_relocs (bfd *abfd, struct bfd_link_info *info)
2049 {
2050   asection *o;
2051
2052   for (o = abfd->sections; o != NULL; o = o->next)
2053     {
2054       Elf_Internal_Rela *internal_relocs;
2055       bfd_boolean ok;
2056
2057       if ((o->flags & SEC_RELOC) == 0
2058           || o->reloc_count == 0
2059           || ((info->strip == strip_all || info->strip == strip_debugger)
2060               && (o->flags & SEC_DEBUGGING) != 0)
2061           || bfd_is_abs_section (o->output_section))
2062         continue;
2063
2064       internal_relocs
2065         = _bfd_elf_link_read_relocs (abfd, o, NULL,
2066                                      (Elf_Internal_Rela *) NULL,
2067                                      info->keep_memory);
2068       if (internal_relocs == NULL)
2069         return FALSE;
2070
2071       ok = mmix_elf_check_common_relocs (abfd, info, o, internal_relocs);
2072
2073       if (! info->keep_memory)
2074         free (internal_relocs);
2075
2076       if (! ok)
2077         return FALSE;
2078     }
2079
2080   return TRUE;
2081 }
2082 \f
2083 /* Change symbols relative to the reg contents section to instead be to
2084    the register section, and scale them down to correspond to the register
2085    number.  */
2086
2087 static int
2088 mmix_elf_link_output_symbol_hook (struct bfd_link_info *info ATTRIBUTE_UNUSED,
2089                                   const char *name ATTRIBUTE_UNUSED,
2090                                   Elf_Internal_Sym *sym,
2091                                   asection *input_sec,
2092                                   struct elf_link_hash_entry *h ATTRIBUTE_UNUSED)
2093 {
2094   if (input_sec != NULL
2095       && input_sec->name != NULL
2096       && ELF_ST_TYPE (sym->st_info) != STT_SECTION
2097       && strcmp (input_sec->name, MMIX_REG_CONTENTS_SECTION_NAME) == 0)
2098     {
2099       sym->st_value /= 8;
2100       sym->st_shndx = SHN_REGISTER;
2101     }
2102
2103   return 1;
2104 }
2105
2106 /* We fake a register section that holds values that are register numbers.
2107    Having a SHN_REGISTER and register section translates better to other
2108    formats (e.g. mmo) than for example a STT_REGISTER attribute.
2109    This section faking is based on a construct in elf32-mips.c.  */
2110 static asection mmix_elf_reg_section;
2111 static asymbol mmix_elf_reg_section_symbol;
2112 static asymbol *mmix_elf_reg_section_symbol_ptr;
2113
2114 /* Handle the special section numbers that a symbol may use.  */
2115
2116 void
2117 mmix_elf_symbol_processing (bfd *abfd ATTRIBUTE_UNUSED, asymbol *asym)
2118 {
2119   elf_symbol_type *elfsym;
2120
2121   elfsym = (elf_symbol_type *) asym;
2122   switch (elfsym->internal_elf_sym.st_shndx)
2123     {
2124     case SHN_REGISTER:
2125       if (mmix_elf_reg_section.name == NULL)
2126         {
2127           /* Initialize the register section.  */
2128           mmix_elf_reg_section.name = MMIX_REG_SECTION_NAME;
2129           mmix_elf_reg_section.flags = SEC_NO_FLAGS;
2130           mmix_elf_reg_section.output_section = &mmix_elf_reg_section;
2131           mmix_elf_reg_section.symbol = &mmix_elf_reg_section_symbol;
2132           mmix_elf_reg_section.symbol_ptr_ptr = &mmix_elf_reg_section_symbol_ptr;
2133           mmix_elf_reg_section_symbol.name = MMIX_REG_SECTION_NAME;
2134           mmix_elf_reg_section_symbol.flags = BSF_SECTION_SYM;
2135           mmix_elf_reg_section_symbol.section = &mmix_elf_reg_section;
2136           mmix_elf_reg_section_symbol_ptr = &mmix_elf_reg_section_symbol;
2137         }
2138       asym->section = &mmix_elf_reg_section;
2139       break;
2140
2141     default:
2142       break;
2143     }
2144 }
2145
2146 /* Given a BFD section, try to locate the corresponding ELF section
2147    index.  */
2148
2149 static bfd_boolean
2150 mmix_elf_section_from_bfd_section (bfd *       abfd ATTRIBUTE_UNUSED,
2151                                    asection *  sec,
2152                                    int *       retval)
2153 {
2154   if (strcmp (bfd_get_section_name (abfd, sec), MMIX_REG_SECTION_NAME) == 0)
2155     *retval = SHN_REGISTER;
2156   else
2157     return FALSE;
2158
2159   return TRUE;
2160 }
2161
2162 /* Hook called by the linker routine which adds symbols from an object
2163    file.  We must handle the special SHN_REGISTER section number here.
2164
2165    We also check that we only have *one* each of the section-start
2166    symbols, since otherwise having two with the same value would cause
2167    them to be "merged", but with the contents serialized.  */
2168
2169 static bfd_boolean
2170 mmix_elf_add_symbol_hook (bfd *abfd,
2171                           struct bfd_link_info *info ATTRIBUTE_UNUSED,
2172                           Elf_Internal_Sym *sym,
2173                           const char **namep ATTRIBUTE_UNUSED,
2174                           flagword *flagsp ATTRIBUTE_UNUSED,
2175                           asection **secp,
2176                           bfd_vma *valp ATTRIBUTE_UNUSED)
2177 {
2178   if (sym->st_shndx == SHN_REGISTER)
2179     {
2180       *secp = bfd_make_section_old_way (abfd, MMIX_REG_SECTION_NAME);
2181       (*secp)->flags |= SEC_LINKER_CREATED;
2182     }
2183   else if ((*namep)[0] == '_' && (*namep)[1] == '_' && (*namep)[2] == '.'
2184            && CONST_STRNEQ (*namep, MMIX_LOC_SECTION_START_SYMBOL_PREFIX))
2185     {
2186       /* See if we have another one.  */
2187       struct bfd_link_hash_entry *h = bfd_link_hash_lookup (info->hash,
2188                                                             *namep,
2189                                                             FALSE,
2190                                                             FALSE,
2191                                                             FALSE);
2192
2193       if (h != NULL && h->type != bfd_link_hash_undefined)
2194         {
2195           /* How do we get the asymbol (or really: the filename) from h?
2196              h->u.def.section->owner is NULL.  */
2197           ((*_bfd_error_handler)
2198            (_("%s: Error: multiple definition of `%s'; start of %s is set in a earlier linked file\n"),
2199             bfd_get_filename (abfd), *namep,
2200             *namep + strlen (MMIX_LOC_SECTION_START_SYMBOL_PREFIX)));
2201            bfd_set_error (bfd_error_bad_value);
2202            return FALSE;
2203         }
2204     }
2205
2206   return TRUE;
2207 }
2208
2209 /* We consider symbols matching "L.*:[0-9]+" to be local symbols.  */
2210
2211 static bfd_boolean
2212 mmix_elf_is_local_label_name (bfd *abfd, const char *name)
2213 {
2214   const char *colpos;
2215   int digits;
2216
2217   /* Also include the default local-label definition.  */
2218   if (_bfd_elf_is_local_label_name (abfd, name))
2219     return TRUE;
2220
2221   if (*name != 'L')
2222     return FALSE;
2223
2224   /* If there's no ":", or more than one, it's not a local symbol.  */
2225   colpos = strchr (name, ':');
2226   if (colpos == NULL || strchr (colpos + 1, ':') != NULL)
2227     return FALSE;
2228
2229   /* Check that there are remaining characters and that they are digits.  */
2230   if (colpos[1] == 0)
2231     return FALSE;
2232
2233   digits = strspn (colpos + 1, "0123456789");
2234   return digits != 0 && colpos[1 + digits] == 0;
2235 }
2236
2237 /* We get rid of the register section here.  */
2238
2239 bfd_boolean
2240 mmix_elf_final_link (bfd *abfd, struct bfd_link_info *info)
2241 {
2242   /* We never output a register section, though we create one for
2243      temporary measures.  Check that nobody entered contents into it.  */
2244   asection *reg_section;
2245
2246   reg_section = bfd_get_section_by_name (abfd, MMIX_REG_SECTION_NAME);
2247
2248   if (reg_section != NULL)
2249     {
2250       /* FIXME: Pass error state gracefully.  */
2251       if (bfd_get_section_flags (abfd, reg_section) & SEC_HAS_CONTENTS)
2252         _bfd_abort (__FILE__, __LINE__, _("Register section has contents\n"));
2253
2254       /* Really remove the section, if it hasn't already been done.  */
2255       if (!bfd_section_removed_from_list (abfd, reg_section))
2256         {
2257           bfd_section_list_remove (abfd, reg_section);
2258           --abfd->section_count;
2259         }
2260     }
2261
2262   if (! bfd_elf_final_link (abfd, info))
2263     return FALSE;
2264
2265   /* Since this section is marked SEC_LINKER_CREATED, it isn't output by
2266      the regular linker machinery.  We do it here, like other targets with
2267      special sections.  */
2268   if (info->base_file != NULL)
2269     {
2270       asection *greg_section
2271         = bfd_get_section_by_name ((bfd *) info->base_file,
2272                                    MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2273       if (!bfd_set_section_contents (abfd,
2274                                      greg_section->output_section,
2275                                      greg_section->contents,
2276                                      (file_ptr) greg_section->output_offset,
2277                                      greg_section->size))
2278         return FALSE;
2279     }
2280   return TRUE;
2281 }
2282
2283 /* We need to include the maximum size of PUSHJ-stubs in the initial
2284    section size.  This is expected to shrink during linker relaxation.  */
2285
2286 static void
2287 mmix_set_relaxable_size (bfd *abfd ATTRIBUTE_UNUSED,
2288                          asection *sec,
2289                          void *ptr)
2290 {
2291   struct bfd_link_info *info = ptr;
2292
2293   /* Make sure we only do this for section where we know we want this,
2294      otherwise we might end up resetting the size of COMMONs.  */
2295   if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0)
2296     return;
2297
2298   sec->rawsize = sec->size;
2299   sec->size += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2300                 * MAX_PUSHJ_STUB_SIZE);
2301
2302   /* For use in relocatable link, we start with a max stubs size.  See
2303      mmix_elf_relax_section.  */
2304   if (bfd_link_relocatable (info) && sec->output_section)
2305     mmix_elf_section_data (sec->output_section)->pjs.stubs_size_sum
2306       += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs
2307           * MAX_PUSHJ_STUB_SIZE);
2308 }
2309
2310 /* Initialize stuff for the linker-generated GREGs to match
2311    R_MMIX_BASE_PLUS_OFFSET relocs seen by the linker.  */
2312
2313 bfd_boolean
2314 _bfd_mmix_before_linker_allocation (bfd *abfd ATTRIBUTE_UNUSED,
2315                                     struct bfd_link_info *info)
2316 {
2317   asection *bpo_gregs_section;
2318   bfd *bpo_greg_owner;
2319   struct bpo_greg_section_info *gregdata;
2320   size_t n_gregs;
2321   bfd_vma gregs_size;
2322   size_t i;
2323   size_t *bpo_reloc_indexes;
2324   bfd *ibfd;
2325
2326   /* Set the initial size of sections.  */
2327   for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link.next)
2328     bfd_map_over_sections (ibfd, mmix_set_relaxable_size, info);
2329
2330   /* The bpo_greg_owner bfd is supposed to have been set by
2331      mmix_elf_check_relocs when the first R_MMIX_BASE_PLUS_OFFSET is seen.
2332      If there is no such object, there was no R_MMIX_BASE_PLUS_OFFSET.  */
2333   bpo_greg_owner = (bfd *) info->base_file;
2334   if (bpo_greg_owner == NULL)
2335     return TRUE;
2336
2337   bpo_gregs_section
2338     = bfd_get_section_by_name (bpo_greg_owner,
2339                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2340
2341   if (bpo_gregs_section == NULL)
2342     return TRUE;
2343
2344   /* We use the target-data handle in the ELF section data.  */
2345   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2346   if (gregdata == NULL)
2347     return FALSE;
2348
2349   n_gregs = gregdata->n_bpo_relocs;
2350   gregdata->n_allocated_bpo_gregs = n_gregs;
2351
2352   /* When this reaches zero during relaxation, all entries have been
2353      filled in and the size of the linker gregs can be calculated.  */
2354   gregdata->n_remaining_bpo_relocs_this_relaxation_round = n_gregs;
2355
2356   /* Set the zeroth-order estimate for the GREGs size.  */
2357   gregs_size = n_gregs * 8;
2358
2359   if (!bfd_set_section_size (bpo_greg_owner, bpo_gregs_section, gregs_size))
2360     return FALSE;
2361
2362   /* Allocate and set up the GREG arrays.  They're filled in at relaxation
2363      time.  Note that we must use the max number ever noted for the array,
2364      since the index numbers were created before GC.  */
2365   gregdata->reloc_request
2366     = bfd_zalloc (bpo_greg_owner,
2367                   sizeof (struct bpo_reloc_request)
2368                   * gregdata->n_max_bpo_relocs);
2369
2370   gregdata->bpo_reloc_indexes
2371     = bpo_reloc_indexes
2372     = bfd_alloc (bpo_greg_owner,
2373                  gregdata->n_max_bpo_relocs
2374                  * sizeof (size_t));
2375   if (bpo_reloc_indexes == NULL)
2376     return FALSE;
2377
2378   /* The default order is an identity mapping.  */
2379   for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2380     {
2381       bpo_reloc_indexes[i] = i;
2382       gregdata->reloc_request[i].bpo_reloc_no = i;
2383     }
2384
2385   return TRUE;
2386 }
2387 \f
2388 /* Fill in contents in the linker allocated gregs.  Everything is
2389    calculated at this point; we just move the contents into place here.  */
2390
2391 bfd_boolean
2392 _bfd_mmix_after_linker_allocation (bfd *abfd ATTRIBUTE_UNUSED,
2393                                    struct bfd_link_info *link_info)
2394 {
2395   asection *bpo_gregs_section;
2396   bfd *bpo_greg_owner;
2397   struct bpo_greg_section_info *gregdata;
2398   size_t n_gregs;
2399   size_t i, j;
2400   size_t lastreg;
2401   bfd_byte *contents;
2402
2403   /* The bpo_greg_owner bfd is supposed to have been set by mmix_elf_check_relocs
2404      when the first R_MMIX_BASE_PLUS_OFFSET is seen.  If there is no such
2405      object, there was no R_MMIX_BASE_PLUS_OFFSET.  */
2406   bpo_greg_owner = (bfd *) link_info->base_file;
2407   if (bpo_greg_owner == NULL)
2408     return TRUE;
2409
2410   bpo_gregs_section
2411     = bfd_get_section_by_name (bpo_greg_owner,
2412                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2413
2414   /* This can't happen without DSO handling.  When DSOs are handled
2415      without any R_MMIX_BASE_PLUS_OFFSET seen, there will be no such
2416      section.  */
2417   if (bpo_gregs_section == NULL)
2418     return TRUE;
2419
2420   /* We use the target-data handle in the ELF section data.  */
2421
2422   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2423   if (gregdata == NULL)
2424     return FALSE;
2425
2426   n_gregs = gregdata->n_allocated_bpo_gregs;
2427
2428   bpo_gregs_section->contents
2429     = contents = bfd_alloc (bpo_greg_owner, bpo_gregs_section->size);
2430   if (contents == NULL)
2431     return FALSE;
2432
2433   /* Sanity check: If these numbers mismatch, some relocation has not been
2434      accounted for and the rest of gregdata is probably inconsistent.
2435      It's a bug, but it's more helpful to identify it than segfaulting
2436      below.  */
2437   if (gregdata->n_remaining_bpo_relocs_this_relaxation_round
2438       != gregdata->n_bpo_relocs)
2439     {
2440       (*_bfd_error_handler)
2441         (_("Internal inconsistency: remaining %u != max %u.\n\
2442   Please report this bug."),
2443          gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2444          gregdata->n_bpo_relocs);
2445       return FALSE;
2446     }
2447
2448   for (lastreg = 255, i = 0, j = 0; j < n_gregs; i++)
2449     if (gregdata->reloc_request[i].regindex != lastreg)
2450       {
2451         bfd_put_64 (bpo_greg_owner, gregdata->reloc_request[i].value,
2452                     contents + j * 8);
2453         lastreg = gregdata->reloc_request[i].regindex;
2454         j++;
2455       }
2456
2457   return TRUE;
2458 }
2459
2460 /* Sort valid relocs to come before non-valid relocs, then on increasing
2461    value.  */
2462
2463 static int
2464 bpo_reloc_request_sort_fn (const void * p1, const void * p2)
2465 {
2466   const struct bpo_reloc_request *r1 = (const struct bpo_reloc_request *) p1;
2467   const struct bpo_reloc_request *r2 = (const struct bpo_reloc_request *) p2;
2468
2469   /* Primary function is validity; non-valid relocs sorted after valid
2470      ones.  */
2471   if (r1->valid != r2->valid)
2472     return r2->valid - r1->valid;
2473
2474   /* Then sort on value.  Don't simplify and return just the difference of
2475      the values: the upper bits of the 64-bit value would be truncated on
2476      a host with 32-bit ints.  */
2477   if (r1->value != r2->value)
2478     return r1->value > r2->value ? 1 : -1;
2479
2480   /* As a last re-sort, use the relocation number, so we get a stable
2481      sort.  The *addresses* aren't stable since items are swapped during
2482      sorting.  It depends on the qsort implementation if this actually
2483      happens.  */
2484   return r1->bpo_reloc_no > r2->bpo_reloc_no
2485     ? 1 : (r1->bpo_reloc_no < r2->bpo_reloc_no ? -1 : 0);
2486 }
2487
2488 /* For debug use only.  Dumps the global register allocations resulting
2489    from base-plus-offset relocs.  */
2490
2491 void
2492 mmix_dump_bpo_gregs (struct bfd_link_info *link_info,
2493                      bfd_error_handler_type pf)
2494 {
2495   bfd *bpo_greg_owner;
2496   asection *bpo_gregs_section;
2497   struct bpo_greg_section_info *gregdata;
2498   unsigned int i;
2499
2500   if (link_info == NULL || link_info->base_file == NULL)
2501     return;
2502
2503   bpo_greg_owner = (bfd *) link_info->base_file;
2504
2505   bpo_gregs_section
2506     = bfd_get_section_by_name (bpo_greg_owner,
2507                                MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME);
2508
2509   if (bpo_gregs_section == NULL)
2510     return;
2511
2512   gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2513   if (gregdata == NULL)
2514     return;
2515
2516   if (pf == NULL)
2517     pf = _bfd_error_handler;
2518
2519   /* These format strings are not translated.  They are for debug purposes
2520      only and never displayed to an end user.  Should they escape, we
2521      surely want them in original.  */
2522   (*pf) (" n_bpo_relocs: %u\n n_max_bpo_relocs: %u\n n_remain...round: %u\n\
2523  n_allocated_bpo_gregs: %u\n", gregdata->n_bpo_relocs,
2524      gregdata->n_max_bpo_relocs,
2525      gregdata->n_remaining_bpo_relocs_this_relaxation_round,
2526      gregdata->n_allocated_bpo_gregs);
2527
2528   if (gregdata->reloc_request)
2529     for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2530       (*pf) ("%4u (%4u)/%4u#%u: 0x%08lx%08lx  r: %3u o: %3u\n",
2531              i,
2532              (gregdata->bpo_reloc_indexes != NULL
2533               ? gregdata->bpo_reloc_indexes[i] : (size_t) -1),
2534              gregdata->reloc_request[i].bpo_reloc_no,
2535              gregdata->reloc_request[i].valid,
2536
2537              (unsigned long) (gregdata->reloc_request[i].value >> 32),
2538              (unsigned long) gregdata->reloc_request[i].value,
2539              gregdata->reloc_request[i].regindex,
2540              gregdata->reloc_request[i].offset);
2541 }
2542
2543 /* This links all R_MMIX_BASE_PLUS_OFFSET relocs into a special array, and
2544    when the last such reloc is done, an index-array is sorted according to
2545    the values and iterated over to produce register numbers (indexed by 0
2546    from the first allocated register number) and offsets for use in real
2547    relocation.  (N.B.: Relocatable runs are handled, not just punted.)
2548
2549    PUSHJ stub accounting is also done here.
2550
2551    Symbol- and reloc-reading infrastructure copied from elf-m10200.c.  */
2552
2553 static bfd_boolean
2554 mmix_elf_relax_section (bfd *abfd,
2555                         asection *sec,
2556                         struct bfd_link_info *link_info,
2557                         bfd_boolean *again)
2558 {
2559   Elf_Internal_Shdr *symtab_hdr;
2560   Elf_Internal_Rela *internal_relocs;
2561   Elf_Internal_Rela *irel, *irelend;
2562   asection *bpo_gregs_section = NULL;
2563   struct bpo_greg_section_info *gregdata;
2564   struct bpo_reloc_section_info *bpodata
2565     = mmix_elf_section_data (sec)->bpo.reloc;
2566   /* The initialization is to quiet compiler warnings.  The value is to
2567      spot a missing actual initialization.  */
2568   size_t bpono = (size_t) -1;
2569   size_t pjsno = 0;
2570   Elf_Internal_Sym *isymbuf = NULL;
2571   bfd_size_type size = sec->rawsize ? sec->rawsize : sec->size;
2572
2573   mmix_elf_section_data (sec)->pjs.stubs_size_sum = 0;
2574
2575   /* Assume nothing changes.  */
2576   *again = FALSE;
2577
2578   /* We don't have to do anything if this section does not have relocs, or
2579      if this is not a code section.  */
2580   if ((sec->flags & SEC_RELOC) == 0
2581       || sec->reloc_count == 0
2582       || (sec->flags & SEC_CODE) == 0
2583       || (sec->flags & SEC_LINKER_CREATED) != 0
2584       /* If no R_MMIX_BASE_PLUS_OFFSET relocs and no PUSHJ-stub relocs,
2585          then nothing to do.  */
2586       || (bpodata == NULL
2587           && mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0))
2588     return TRUE;
2589
2590   symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
2591
2592   if (bpodata != NULL)
2593     {
2594       bpo_gregs_section = bpodata->bpo_greg_section;
2595       gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg;
2596       bpono = bpodata->first_base_plus_offset_reloc;
2597     }
2598   else
2599     gregdata = NULL;
2600
2601   /* Get a copy of the native relocations.  */
2602   internal_relocs
2603     = _bfd_elf_link_read_relocs (abfd, sec, NULL,
2604                                  (Elf_Internal_Rela *) NULL,
2605                                  link_info->keep_memory);
2606   if (internal_relocs == NULL)
2607     goto error_return;
2608
2609   /* Walk through them looking for relaxing opportunities.  */
2610   irelend = internal_relocs + sec->reloc_count;
2611   for (irel = internal_relocs; irel < irelend; irel++)
2612     {
2613       bfd_vma symval;
2614       struct elf_link_hash_entry *h = NULL;
2615
2616       /* We only process two relocs.  */
2617       if (ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_BASE_PLUS_OFFSET
2618           && ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_PUSHJ_STUBBABLE)
2619         continue;
2620
2621       /* We process relocs in a distinctly different way when this is a
2622          relocatable link (for one, we don't look at symbols), so we avoid
2623          mixing its code with that for the "normal" relaxation.  */
2624       if (bfd_link_relocatable (link_info))
2625         {
2626           /* The only transformation in a relocatable link is to generate
2627              a full stub at the location of the stub calculated for the
2628              input section, if the relocated stub location, the end of the
2629              output section plus earlier stubs, cannot be reached.  Thus
2630              relocatable linking can only lead to worse code, but it still
2631              works.  */
2632           if (ELF64_R_TYPE (irel->r_info) == R_MMIX_PUSHJ_STUBBABLE)
2633             {
2634               /* If we can reach the end of the output-section and beyond
2635                  any current stubs, then we don't need a stub for this
2636                  reloc.  The relaxed order of output stub allocation may
2637                  not exactly match the straightforward order, so we always
2638                  assume presence of output stubs, which will allow
2639                  relaxation only on relocations indifferent to the
2640                  presence of output stub allocations for other relocations
2641                  and thus the order of output stub allocation.  */
2642               if (bfd_check_overflow (complain_overflow_signed,
2643                                       19,
2644                                       0,
2645                                       bfd_arch_bits_per_address (abfd),
2646                                       /* Output-stub location.  */
2647                                       sec->output_section->rawsize
2648                                       + (mmix_elf_section_data (sec
2649                                                                ->output_section)
2650                                          ->pjs.stubs_size_sum)
2651                                       /* Location of this PUSHJ reloc.  */
2652                                       - (sec->output_offset + irel->r_offset)
2653                                       /* Don't count *this* stub twice.  */
2654                                       - (mmix_elf_section_data (sec)
2655                                          ->pjs.stub_size[pjsno]
2656                                          + MAX_PUSHJ_STUB_SIZE))
2657                   == bfd_reloc_ok)
2658                 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2659
2660               mmix_elf_section_data (sec)->pjs.stubs_size_sum
2661                 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2662
2663               pjsno++;
2664             }
2665
2666           continue;
2667         }
2668
2669       /* Get the value of the symbol referred to by the reloc.  */
2670       if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info)
2671         {
2672           /* A local symbol.  */
2673           Elf_Internal_Sym *isym;
2674           asection *sym_sec;
2675
2676           /* Read this BFD's local symbols if we haven't already.  */
2677           if (isymbuf == NULL)
2678             {
2679               isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
2680               if (isymbuf == NULL)
2681                 isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
2682                                                 symtab_hdr->sh_info, 0,
2683                                                 NULL, NULL, NULL);
2684               if (isymbuf == 0)
2685                 goto error_return;
2686             }
2687
2688           isym = isymbuf + ELF64_R_SYM (irel->r_info);
2689           if (isym->st_shndx == SHN_UNDEF)
2690             sym_sec = bfd_und_section_ptr;
2691           else if (isym->st_shndx == SHN_ABS)
2692             sym_sec = bfd_abs_section_ptr;
2693           else if (isym->st_shndx == SHN_COMMON)
2694             sym_sec = bfd_com_section_ptr;
2695           else
2696             sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
2697           symval = (isym->st_value
2698                     + sym_sec->output_section->vma
2699                     + sym_sec->output_offset);
2700         }
2701       else
2702         {
2703           unsigned long indx;
2704
2705           /* An external symbol.  */
2706           indx = ELF64_R_SYM (irel->r_info) - symtab_hdr->sh_info;
2707           h = elf_sym_hashes (abfd)[indx];
2708           BFD_ASSERT (h != NULL);
2709           if (h->root.type != bfd_link_hash_defined
2710               && h->root.type != bfd_link_hash_defweak)
2711             {
2712               /* This appears to be a reference to an undefined symbol.  Just
2713                  ignore it--it will be caught by the regular reloc processing.
2714                  We need to keep BPO reloc accounting consistent, though
2715                  else we'll abort instead of emitting an error message.  */
2716               if (ELF64_R_TYPE (irel->r_info) == R_MMIX_BASE_PLUS_OFFSET
2717                   && gregdata != NULL)
2718                 {
2719                   gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2720                   bpono++;
2721                 }
2722               continue;
2723             }
2724
2725           symval = (h->root.u.def.value
2726                     + h->root.u.def.section->output_section->vma
2727                     + h->root.u.def.section->output_offset);
2728         }
2729
2730       if (ELF64_R_TYPE (irel->r_info) == (int) R_MMIX_PUSHJ_STUBBABLE)
2731         {
2732           bfd_vma value = symval + irel->r_addend;
2733           bfd_vma dot
2734             = (sec->output_section->vma
2735                + sec->output_offset
2736                + irel->r_offset);
2737           bfd_vma stubaddr
2738             = (sec->output_section->vma
2739                + sec->output_offset
2740                + size
2741                + mmix_elf_section_data (sec)->pjs.stubs_size_sum);
2742
2743           if ((value & 3) == 0
2744               && bfd_check_overflow (complain_overflow_signed,
2745                                      19,
2746                                      0,
2747                                      bfd_arch_bits_per_address (abfd),
2748                                      value - dot
2749                                      - (value > dot
2750                                         ? mmix_elf_section_data (sec)
2751                                         ->pjs.stub_size[pjsno]
2752                                         : 0))
2753               == bfd_reloc_ok)
2754             /* If the reloc fits, no stub is needed.  */
2755             mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0;
2756           else
2757             /* Maybe we can get away with just a JMP insn?  */
2758             if ((value & 3) == 0
2759                 && bfd_check_overflow (complain_overflow_signed,
2760                                        27,
2761                                        0,
2762                                        bfd_arch_bits_per_address (abfd),
2763                                        value - stubaddr
2764                                        - (value > dot
2765                                           ? mmix_elf_section_data (sec)
2766                                           ->pjs.stub_size[pjsno] - 4
2767                                           : 0))
2768                 == bfd_reloc_ok)
2769               /* Yep, account for a stub consisting of a single JMP insn.  */
2770               mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 4;
2771           else
2772             /* Nope, go for the full insn stub.  It doesn't seem useful to
2773                emit the intermediate sizes; those will only be useful for
2774                a >64M program assuming contiguous code.  */
2775             mmix_elf_section_data (sec)->pjs.stub_size[pjsno]
2776               = MAX_PUSHJ_STUB_SIZE;
2777
2778           mmix_elf_section_data (sec)->pjs.stubs_size_sum
2779             += mmix_elf_section_data (sec)->pjs.stub_size[pjsno];
2780           pjsno++;
2781           continue;
2782         }
2783
2784       /* We're looking at a R_MMIX_BASE_PLUS_OFFSET reloc.  */
2785
2786       gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono]].value
2787         = symval + irel->r_addend;
2788       gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono++]].valid = TRUE;
2789       gregdata->n_remaining_bpo_relocs_this_relaxation_round--;
2790     }
2791
2792   /* Check if that was the last BPO-reloc.  If so, sort the values and
2793      calculate how many registers we need to cover them.  Set the size of
2794      the linker gregs, and if the number of registers changed, indicate
2795      that we need to relax some more because we have more work to do.  */
2796   if (gregdata != NULL
2797       && gregdata->n_remaining_bpo_relocs_this_relaxation_round == 0)
2798     {
2799       size_t i;
2800       bfd_vma prev_base;
2801       size_t regindex;
2802
2803       /* First, reset the remaining relocs for the next round.  */
2804       gregdata->n_remaining_bpo_relocs_this_relaxation_round
2805         = gregdata->n_bpo_relocs;
2806
2807       qsort (gregdata->reloc_request,
2808              gregdata->n_max_bpo_relocs,
2809              sizeof (struct bpo_reloc_request),
2810              bpo_reloc_request_sort_fn);
2811
2812       /* Recalculate indexes.  When we find a change (however unlikely
2813          after the initial iteration), we know we need to relax again,
2814          since items in the GREG-array are sorted by increasing value and
2815          stored in the relaxation phase.  */
2816       for (i = 0; i < gregdata->n_max_bpo_relocs; i++)
2817         if (gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2818             != i)
2819           {
2820             gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no]
2821               = i;
2822             *again = TRUE;
2823           }
2824
2825       /* Allocate register numbers (indexing from 0).  Stop at the first
2826          non-valid reloc.  */
2827       for (i = 0, regindex = 0, prev_base = gregdata->reloc_request[0].value;
2828            i < gregdata->n_bpo_relocs;
2829            i++)
2830         {
2831           if (gregdata->reloc_request[i].value > prev_base + 255)
2832             {
2833               regindex++;
2834               prev_base = gregdata->reloc_request[i].value;
2835             }
2836           gregdata->reloc_request[i].regindex = regindex;
2837           gregdata->reloc_request[i].offset
2838             = gregdata->reloc_request[i].value - prev_base;
2839         }
2840
2841       /* If it's not the same as the last time, we need to relax again,
2842          because the size of the section has changed.  I'm not sure we
2843          actually need to do any adjustments since the shrinking happens
2844          at the start of this section, but better safe than sorry.  */
2845       if (gregdata->n_allocated_bpo_gregs != regindex + 1)
2846         {
2847           gregdata->n_allocated_bpo_gregs = regindex + 1;
2848           *again = TRUE;
2849         }
2850
2851       bpo_gregs_section->size = (regindex + 1) * 8;
2852     }
2853
2854   if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2855     {
2856       if (! link_info->keep_memory)
2857         free (isymbuf);
2858       else
2859         {
2860           /* Cache the symbols for elf_link_input_bfd.  */
2861           symtab_hdr->contents = (unsigned char *) isymbuf;
2862         }
2863     }
2864
2865   if (internal_relocs != NULL
2866       && elf_section_data (sec)->relocs != internal_relocs)
2867     free (internal_relocs);
2868
2869   if (sec->size < size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2870     abort ();
2871
2872   if (sec->size > size + mmix_elf_section_data (sec)->pjs.stubs_size_sum)
2873     {
2874       sec->size = size + mmix_elf_section_data (sec)->pjs.stubs_size_sum;
2875       *again = TRUE;
2876     }
2877
2878   return TRUE;
2879
2880  error_return:
2881   if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents)
2882     free (isymbuf);
2883   if (internal_relocs != NULL
2884       && elf_section_data (sec)->relocs != internal_relocs)
2885     free (internal_relocs);
2886   return FALSE;
2887 }
2888 \f
2889 #define ELF_ARCH                bfd_arch_mmix
2890 #define ELF_MACHINE_CODE        EM_MMIX
2891
2892 /* According to mmix-doc page 36 (paragraph 45), this should be (1LL << 48LL).
2893    However, that's too much for something somewhere in the linker part of
2894    BFD; perhaps the start-address has to be a non-zero multiple of this
2895    number, or larger than this number.  The symptom is that the linker
2896    complains: "warning: allocated section `.text' not in segment".  We
2897    settle for 64k; the page-size used in examples is 8k.
2898    #define ELF_MAXPAGESIZE 0x10000
2899
2900    Unfortunately, this causes excessive padding in the supposedly small
2901    for-education programs that are the expected usage (where people would
2902    inspect output).  We stick to 256 bytes just to have *some* default
2903    alignment.  */
2904 #define ELF_MAXPAGESIZE 0x100
2905
2906 #define TARGET_BIG_SYM          mmix_elf64_vec
2907 #define TARGET_BIG_NAME         "elf64-mmix"
2908
2909 #define elf_info_to_howto_rel           NULL
2910 #define elf_info_to_howto               mmix_info_to_howto_rela
2911 #define elf_backend_relocate_section    mmix_elf_relocate_section
2912 #define elf_backend_gc_mark_hook        mmix_elf_gc_mark_hook
2913 #define elf_backend_gc_sweep_hook       mmix_elf_gc_sweep_hook
2914
2915 #define elf_backend_link_output_symbol_hook \
2916         mmix_elf_link_output_symbol_hook
2917 #define elf_backend_add_symbol_hook     mmix_elf_add_symbol_hook
2918
2919 #define elf_backend_check_relocs        mmix_elf_check_relocs
2920 #define elf_backend_symbol_processing   mmix_elf_symbol_processing
2921 #define elf_backend_omit_section_dynsym \
2922   ((bfd_boolean (*) (bfd *, struct bfd_link_info *, asection *)) bfd_true)
2923
2924 #define bfd_elf64_bfd_is_local_label_name \
2925         mmix_elf_is_local_label_name
2926
2927 #define elf_backend_may_use_rel_p       0
2928 #define elf_backend_may_use_rela_p      1
2929 #define elf_backend_default_use_rela_p  1
2930
2931 #define elf_backend_can_gc_sections     1
2932 #define elf_backend_section_from_bfd_section \
2933         mmix_elf_section_from_bfd_section
2934
2935 #define bfd_elf64_new_section_hook      mmix_elf_new_section_hook
2936 #define bfd_elf64_bfd_final_link        mmix_elf_final_link
2937 #define bfd_elf64_bfd_relax_section     mmix_elf_relax_section
2938
2939 #include "elf64-target.h"