1 Testing environment {#auto_testing}
4 The new test environment from Tizen is the Web-TCT test suite. This was written for testing web components, but can easily be used for testing Dali.
6 Each of the DALi repositories, **dali-core**, **dali-adaptor** and **dali-toolkit**, have their own test suites under the `automated-tests` folder. Within the src folder are a number of secondary folders - these correspond to 'API' tests and internal (for desktop testing only)
11 There are usage instructions and installation instructions on the Tizen.org website [here](http://download.tizen.org/tct/2.2.1/Manual/Web_TCT_2.2.1_User_Guide_v1.0.pdf)
13 These are device specific instructions, however, installing the test suite will also provide the relevant packages for running tests on Ubuntu ( follow the first block of quickstart instructions below ).
15 If you are planning on running tests on device, then flash your handset with latest image, or turn off ssh: `set_usb_debug.sh --mtp-sdb` and plug it in, then follow the quickstart instructions repeated below.
17 Multi-language locale environment
18 ---------------------------------
20 Locales for English and Arabic must be installed to pass some test cases:
30 For target or desktop testing:
33 wget http://download.tizen.org/tct/2.2.1/2.2.1_r1/web-tct_2.2.1_r1.tar.gz
34 sudo tar xzf web-tct_2.2.1_r1.tar.gz
35 cd web-tct_2.2.1_r1/tools
36 sudo -E ./tct-config-host.sh
39 If you are planning on running tests on device, then plug in your freshly flashed device and run the following commands:
41 sudo apt-get install sdb
42 ./tct-config-device.sh
44 **NOTE:** After flashing a handset, you will need to run this step of the installation again.
49 Building libraries with coverage options
50 ----------------------------------------
54 cd dali-core # the location of your dali-core repository
58 git clean -fxd . # Only do this in the build folder
60 CXXFLAGS='-g -O0 --coverage' LDFLAGS='--coverage' ./configure --prefix=$DESKTOP_PREFIX --enable-debug
63 Repeat for dali-adaptor and toolkit.
65 Note, you __must__ use a local build and not a distributed build, and you __must__ also build with debug enabled to allow *DALI_ASSERT_DEBUG* to trigger on wrong behaviour ( Which should always be a test case failure! )
70 Run the following commands:
75 This will build dali-toolkit and dali-toolkit-internal test sets.
77 Test sets can be built individually:
79 ./build.sh dali-toolkit
81 They can also be built without regenerating test case scripts (Useful for quicker rebuilds)
83 ./build.sh -n dali-toolkit-internal
85 Or without cleaning down the build area (Useful for fast build/run/debug cycles)
87 ./build.sh -n -r dali-toolkit-internal
93 To see a list of all of the options:
97 To execute tests, cd into automated-tests and run
101 This will execute dali and dali-internal test sets. Note that the output summary for the first will be printed before running the second.
103 By default the tests execute in parallel, which is faster but does not produce any test case output files. Use this to execute the tests in series and log test output to stdout/err
107 To use test kit lite, (which is very slow),
111 To see the test kit lite results, copy the style folder from web-tct_2.2.1_r1/tools/tct-mgr/style into automated-tests and run
113 firefox --new-window summary.xml
115 To execute a subset of tests, you can run individual test sets, e.g.
117 ./execute.sh dali-toolkit
119 To get coverage output (you need to first build dali libraries with
128 To build for target, first build and install dali-core, dali-adaptor and dali-toolkit, then build dali-capi without --keep-packs option.
130 You will need to install libconfig-tiny-perl:
132 sudo apt-get install libconfig-tiny-perl
134 If you use a non-standard `GBS_ROOT` then you will need to edit the tcbuild script to match your configuration - change line 96 and add a -B option with your GBS-ROOT path (line 96 = `gbs build -A armv7l --spec core-$1-tests.spec --include-all --keep-packs` ).
135 To install on device from a non-standard GBS_ROOT, also modify line 28 (`RPM_DIR="$HOME/GBS-ROOT/local/repos/$PROFILE/armv7l/RPMS"`).
137 For core Dali cd into automated-tests, and use:
139 sudo ./tcbuild build dali
141 sudo ./tcbuild build dali
142 ./tcbuild install dali
144 For Dali Adaptor, cd into automated-tests, and use:
146 sudo ./tcbuild build dali-adaptor
147 sudo ./tcbuild build dali-platform-abstraction
148 ./tcbuild install dali-adaptor
149 ./tcbuild install dali-platform-abstraction
151 Ensure your handset's filesystem is writable:
153 sdb shell su -c "change-booting-mode.sh --update"
155 To execute tests, cd into automated-tests and run
159 This will bring up the java test suite program. You should see the Plan pane with a list of all tests in. Select the tct-dali-core-tests. and you will be offered a dialog to choose a test plan: either create a new one or use temp.
160 Select dali test suite, and click Run, then "Create a new plan", and call it "Dali-Core" or some such. It will now run the dali-test suite.
162 You can find the output files under /opt/tct/manager/result/
171 If you are adding test cases for new or existing managed API (CAPI), you need to add your changes to the src/dali mirror, and copy your change to the managed test suite in core-api. You need to inform HQ of your update.
176 If you are adding tests for internal API, then this will only work on desktop, and you should add your tests to the src/dali-internal test suite.
181 If you are adding test cases to existing files, then all you need to do is create functions with the method signature
183 int UtcTestcase(void)
185 TestApplication application;
191 Note that **there must be no extra whitespace in the method signature** (i.e., it must violate our coding convention and follow __exactly__ this pattern: `int UtcDaliMyTestcaseName(void)`), as it's parsed by an awk script to auto-generate the testcase arrays in the main header file.
193 You can contine to use the TET api, e.g. `tet_infoline`, `tet_result` and our test check methods `DALI_TEST_CHECK`, `DALI_TEST_EQUALS`, etc.
195 If you need any non-test methods or variables, ensure they are wrapped in an anonymous namespace.
197 If you are adding new test files, then you need to add the filename to the SET(TC_SOURCES...
198 section of CMakeLists.txt (this is also parsed by an awk script prior to building)
203 On desktop, you can debug the tests by running gdb on the test program:
206 $ gdb build/src/dali-toolkit/tct-dali-toolkit-core
209 replace `<TestCase>` with the name of the failing testcase.
211 For example, using testcase UtcDaliControlBackgroundProperties from the dali-toolkit test suite:
213 $ gdb build/src/dali-toolkit/tct-dali-toolkit-core
214 gdb> r UtcDaliControlBackgroundProperties
217 On target, you can re-install the test RPM and associated debug RPMs manually using
219 sdb push <test-package>.rpm /tmp
221 After installing the rpm and it's debug RPMs, you can find the executable in /opt/usr/bin/tct-dali-core. First ensure you have smack permissions set:
223 chsmack -e "^" /usr/bin/gdb
224 chsmack -e "^" /opt/usr/bin/tct-dali-toolkit-core/tct-dali-toolkit-core
226 then run it under gdb as above.
232 If when running tct-mgr tests, if "Health-Check get" fails and leaves a white screen on the device, you will need to run `tct-config-device.sh` from your `web-tct/tools` directory (wherever you untarred it) and power cycle your handset. If that still fails, you can work-around the issue by running "`mkdir –p /opt/usr/media/Documents/tct/`" on target – you may also need to kill the getCapabilities app from App Manager on the handset)
234 If the test results show that the test cases fail with "Undefined reference to XXX", it means you have probably failed to update the dali packages on target.
236 If all the tests are failing then make sure that you have enabled the engineering mode on the target with the 'change-booting-mode.sh --update' command in sdb shell, as the tests may not have installed correctly