mm: introduce arch_has_hw_nonleaf_pmd_young()
[platform/kernel/linux-starfive.git] / arch / x86 / include / asm / thread_info.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* thread_info.h: low-level thread information
3  *
4  * Copyright (C) 2002  David Howells (dhowells@redhat.com)
5  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
6  */
7
8 #ifndef _ASM_X86_THREAD_INFO_H
9 #define _ASM_X86_THREAD_INFO_H
10
11 #include <linux/compiler.h>
12 #include <asm/page.h>
13 #include <asm/percpu.h>
14 #include <asm/types.h>
15
16 /*
17  * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
18  * reserve at the top of the kernel stack.  We do it because of a nasty
19  * 32-bit corner case.  On x86_32, the hardware stack frame is
20  * variable-length.  Except for vm86 mode, struct pt_regs assumes a
21  * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
22  * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
23  * does in at least one case:
24  *
25  * If we take an NMI early enough in SYSENTER, then we can end up with
26  * pt_regs that extends above sp0.  On the way out, in the espfix code,
27  * we can read the saved SS value, but that value will be above sp0.
28  * Without this offset, that can result in a page fault.  (We are
29  * careful that, in this case, the value we read doesn't matter.)
30  *
31  * In vm86 mode, the hardware frame is much longer still, so add 16
32  * bytes to make room for the real-mode segments.
33  *
34  * x86_64 has a fixed-length stack frame.
35  */
36 #ifdef CONFIG_X86_32
37 # ifdef CONFIG_VM86
38 #  define TOP_OF_KERNEL_STACK_PADDING 16
39 # else
40 #  define TOP_OF_KERNEL_STACK_PADDING 8
41 # endif
42 #else
43 # define TOP_OF_KERNEL_STACK_PADDING 0
44 #endif
45
46 /*
47  * low level task data that entry.S needs immediate access to
48  * - this struct should fit entirely inside of one cache line
49  * - this struct shares the supervisor stack pages
50  */
51 #ifndef __ASSEMBLY__
52 struct task_struct;
53 #include <asm/cpufeature.h>
54 #include <linux/atomic.h>
55
56 struct thread_info {
57         unsigned long           flags;          /* low level flags */
58         unsigned long           syscall_work;   /* SYSCALL_WORK_ flags */
59         u32                     status;         /* thread synchronous flags */
60 #ifdef CONFIG_SMP
61         u32                     cpu;            /* current CPU */
62 #endif
63 };
64
65 #define INIT_THREAD_INFO(tsk)                   \
66 {                                               \
67         .flags          = 0,                    \
68 }
69
70 #else /* !__ASSEMBLY__ */
71
72 #include <asm/asm-offsets.h>
73
74 #endif
75
76 /*
77  * thread information flags
78  * - these are process state flags that various assembly files
79  *   may need to access
80  */
81 #define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
82 #define TIF_SIGPENDING          2       /* signal pending */
83 #define TIF_NEED_RESCHED        3       /* rescheduling necessary */
84 #define TIF_SINGLESTEP          4       /* reenable singlestep on user return*/
85 #define TIF_SSBD                5       /* Speculative store bypass disable */
86 #define TIF_SPEC_IB             9       /* Indirect branch speculation mitigation */
87 #define TIF_SPEC_L1D_FLUSH      10      /* Flush L1D on mm switches (processes) */
88 #define TIF_USER_RETURN_NOTIFY  11      /* notify kernel of userspace return */
89 #define TIF_UPROBE              12      /* breakpointed or singlestepping */
90 #define TIF_PATCH_PENDING       13      /* pending live patching update */
91 #define TIF_NEED_FPU_LOAD       14      /* load FPU on return to userspace */
92 #define TIF_NOCPUID             15      /* CPUID is not accessible in userland */
93 #define TIF_NOTSC               16      /* TSC is not accessible in userland */
94 #define TIF_NOTIFY_SIGNAL       17      /* signal notifications exist */
95 #define TIF_MEMDIE              20      /* is terminating due to OOM killer */
96 #define TIF_POLLING_NRFLAG      21      /* idle is polling for TIF_NEED_RESCHED */
97 #define TIF_IO_BITMAP           22      /* uses I/O bitmap */
98 #define TIF_SPEC_FORCE_UPDATE   23      /* Force speculation MSR update in context switch */
99 #define TIF_FORCED_TF           24      /* true if TF in eflags artificially */
100 #define TIF_BLOCKSTEP           25      /* set when we want DEBUGCTLMSR_BTF */
101 #define TIF_LAZY_MMU_UPDATES    27      /* task is updating the mmu lazily */
102 #define TIF_ADDR32              29      /* 32-bit address space on 64 bits */
103
104 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
105 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
106 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
107 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
108 #define _TIF_SSBD               (1 << TIF_SSBD)
109 #define _TIF_SPEC_IB            (1 << TIF_SPEC_IB)
110 #define _TIF_SPEC_L1D_FLUSH     (1 << TIF_SPEC_L1D_FLUSH)
111 #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
112 #define _TIF_UPROBE             (1 << TIF_UPROBE)
113 #define _TIF_PATCH_PENDING      (1 << TIF_PATCH_PENDING)
114 #define _TIF_NEED_FPU_LOAD      (1 << TIF_NEED_FPU_LOAD)
115 #define _TIF_NOCPUID            (1 << TIF_NOCPUID)
116 #define _TIF_NOTSC              (1 << TIF_NOTSC)
117 #define _TIF_NOTIFY_SIGNAL      (1 << TIF_NOTIFY_SIGNAL)
118 #define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
119 #define _TIF_IO_BITMAP          (1 << TIF_IO_BITMAP)
120 #define _TIF_SPEC_FORCE_UPDATE  (1 << TIF_SPEC_FORCE_UPDATE)
121 #define _TIF_FORCED_TF          (1 << TIF_FORCED_TF)
122 #define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
123 #define _TIF_LAZY_MMU_UPDATES   (1 << TIF_LAZY_MMU_UPDATES)
124 #define _TIF_ADDR32             (1 << TIF_ADDR32)
125
126 /* flags to check in __switch_to() */
127 #define _TIF_WORK_CTXSW_BASE                                    \
128         (_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |           \
129          _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
130
131 /*
132  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
133  */
134 #ifdef CONFIG_SMP
135 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
136 #else
137 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE)
138 #endif
139
140 #ifdef CONFIG_X86_IOPL_IOPERM
141 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY | \
142                                  _TIF_IO_BITMAP)
143 #else
144 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY)
145 #endif
146
147 #define _TIF_WORK_CTXSW_NEXT    (_TIF_WORK_CTXSW)
148
149 #define STACK_WARN              (THREAD_SIZE/8)
150
151 /*
152  * macros/functions for gaining access to the thread information structure
153  *
154  * preempt_count needs to be 1 initially, until the scheduler is functional.
155  */
156 #ifndef __ASSEMBLY__
157
158 /*
159  * Walks up the stack frames to make sure that the specified object is
160  * entirely contained by a single stack frame.
161  *
162  * Returns:
163  *      GOOD_FRAME      if within a frame
164  *      BAD_STACK       if placed across a frame boundary (or outside stack)
165  *      NOT_STACK       unable to determine (no frame pointers, etc)
166  */
167 static inline int arch_within_stack_frames(const void * const stack,
168                                            const void * const stackend,
169                                            const void *obj, unsigned long len)
170 {
171 #if defined(CONFIG_FRAME_POINTER)
172         const void *frame = NULL;
173         const void *oldframe;
174
175         oldframe = __builtin_frame_address(1);
176         if (oldframe)
177                 frame = __builtin_frame_address(2);
178         /*
179          * low ----------------------------------------------> high
180          * [saved bp][saved ip][args][local vars][saved bp][saved ip]
181          *                     ^----------------^
182          *               allow copies only within here
183          */
184         while (stack <= frame && frame < stackend) {
185                 /*
186                  * If obj + len extends past the last frame, this
187                  * check won't pass and the next frame will be 0,
188                  * causing us to bail out and correctly report
189                  * the copy as invalid.
190                  */
191                 if (obj + len <= frame)
192                         return obj >= oldframe + 2 * sizeof(void *) ?
193                                 GOOD_FRAME : BAD_STACK;
194                 oldframe = frame;
195                 frame = *(const void * const *)frame;
196         }
197         return BAD_STACK;
198 #else
199         return NOT_STACK;
200 #endif
201 }
202
203 #endif  /* !__ASSEMBLY__ */
204
205 /*
206  * Thread-synchronous status.
207  *
208  * This is different from the flags in that nobody else
209  * ever touches our thread-synchronous status, so we don't
210  * have to worry about atomic accesses.
211  */
212 #define TS_COMPAT               0x0002  /* 32bit syscall active (64BIT)*/
213
214 #ifndef __ASSEMBLY__
215 #ifdef CONFIG_COMPAT
216 #define TS_I386_REGS_POKED      0x0004  /* regs poked by 32-bit ptracer */
217
218 #define arch_set_restart_data(restart)  \
219         do { restart->arch_data = current_thread_info()->status; } while (0)
220
221 #endif
222
223 #ifdef CONFIG_X86_32
224 #define in_ia32_syscall() true
225 #else
226 #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
227                            current_thread_info()->status & TS_COMPAT)
228 #endif
229
230 extern void arch_task_cache_init(void);
231 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
232 extern void arch_release_task_struct(struct task_struct *tsk);
233 extern void arch_setup_new_exec(void);
234 #define arch_setup_new_exec arch_setup_new_exec
235 #endif  /* !__ASSEMBLY__ */
236
237 #endif /* _ASM_X86_THREAD_INFO_H */