2 * U-Boot - x86 Startup Code
4 * (C) Copyright 2008-2011
5 * Graeme Russ, <graeme.russ@gmail.com>
8 * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
10 * SPDX-License-Identifier: GPL-2.0+
14 #include <asm/global_data.h>
16 #include <asm/processor.h>
17 #include <asm/processor-flags.h>
18 #include <generated/generic-asm-offsets.h>
19 #include <generated/asm-offsets.h>
24 .type _start, @function
28 * This is the fail-safe 32-bit bootstrap entry point.
30 * This code is used when booting from another boot loader like
31 * coreboot or EFI. So we repeat some of the same init found in
37 /* Turn off cache (this might require a 486-class CPU) */
39 orl $(X86_CR0_NW | X86_CR0_CD), %eax
43 /* Tell 32-bit code it is being entered from an in-RAM copy */
44 movl $GD_FLG_WARM_BOOT, %ebx
47 * Zero the BIST (Built-In Self Test) value since we don't have it.
48 * It must be 0 or the previous loader would have reported an error.
54 /* Add a way for tools to discover the _start entry point */
59 * This is the 32-bit cold-reset entry point, coming from start16.
60 * Set %ebx to GD_FLG_COLD_BOOT to indicate this.
62 movl $GD_FLG_COLD_BOOT, %ebx
68 /* Save table pointer */
71 /* Load the segement registers to match the GDT loaded in start16.S */
72 movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
79 /* Clear the interrupt vectors */
83 * Critical early platform init - generally not used, we prefer init
84 * to happen later when we have a console, in case something goes
88 .globl early_board_init_ret
92 /* Initialise Cache-As-RAM */
96 #ifndef CONFIG_HAVE_FSP
98 * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
99 * or fully initialised SDRAM - we really don't care which)
100 * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
101 * and early malloc() area. The MRC requires some space at the top.
103 * Stack grows down from top of CAR. We have:
105 * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
107 * global_data with x86 global descriptor table
110 * bottom-> CONFIG_SYS_CAR_ADDR
112 movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
113 #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
114 subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
118 * U-Boot enters here twice. For the first time it comes from
119 * car_init_done() with esp points to a temporary stack and esi
120 * set to zero. For the second time it comes from fsp_init_done()
121 * with esi holding the HOB list address returned by the FSP.
124 /* Set up global data */
126 call board_init_f_mem
129 #ifdef CONFIG_DEBUG_UART
133 /* Get address of global_data */
135 #ifdef CONFIG_HAVE_FSP
136 /* Store the HOB list if we have one */
139 movl %esi, GD_HOB_LIST(%edx)
142 * After fsp_init() returns, the stack has already been switched to a
143 * place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
144 * Enlarge the size of malloc() pool before relocation since we have
145 * plenty of memory now.
147 subl $CONFIG_FSP_SYS_MALLOC_F_LEN, %esp
148 movl %esp, GD_MALLOC_BASE(%edx)
151 /* Store table pointer */
152 movl %esi, GD_TABLE(%edx)
155 movl %ebp, GD_BIST(%edx)
157 /* Set parameter to board_init_f() to boot flags */
158 post_code(POST_START_DONE)
164 /* indicate (lack of) progress */
168 .globl board_init_f_r_trampoline
169 .type board_init_f_r_trampoline, @function
170 board_init_f_r_trampoline:
172 * SDRAM has been initialised, U-Boot code has been copied into
173 * RAM, BSS has been cleared and relocation adjustments have been
174 * made. It is now time to jump into the in-RAM copy of U-Boot
176 * %eax = Address of top of new stack
179 /* Stack grows down from top of SDRAM */
182 /* See if we need to disable CAR */
184 movl $car_uninit, %eax
190 /* Re-enter U-Boot by calling board_init_f_r() */
202 .p2align 2 /* force 4-byte alignment */
204 /* Add a multiboot header so U-Boot can be loaded by GRUB2 */
211 .long -0x1BADB002 - (1 << 16)
213 .long multiboot_header - _x86boot_start + CONFIG_SYS_TEXT_BASE
215 .long CONFIG_SYS_TEXT_BASE
221 .long CONFIG_SYS_TEXT_BASE