arch/x86/cpu/sc520/sc520_sdram.c

   1 /*
   2  * (C) Copyright 2010,2011
   3  * Graeme Russ, <graeme.russ@gmail.com>
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <common.h>
  25 #include <asm/io.h>
  26 #include <asm/processor-flags.h>
  27 #include <asm/ic/sc520.h>
  28
  29 DECLARE_GLOBAL_DATA_PTR;
  30
  31 struct sc520_sdram_info {
  32         u8 banks;
  33         u8 columns;
  34         u8 rows;
  35         u8 size;
  36 };
  37
  38 static void sc520_sizemem(void);
  39 static void sc520_set_dram_timing(void);
  40 static void sc520_set_dram_refresh_rate(void);
  41 static void sc520_enable_dram_refresh(void);
  42 static void sc520_enable_sdram(void);
  43 #if CONFIG_SYS_SDRAM_ECC_ENABLE
  44 static void sc520_enable_ecc(void)
  45 #endif
  46
  47 int dram_init_f(void)
  48 {
  49         sc520_sizemem();
  50         sc520_set_dram_timing();
  51         sc520_set_dram_refresh_rate();
  52         sc520_enable_dram_refresh();
  53         sc520_enable_sdram();
  54 #if CONFIG_SYS_SDRAM_ECC_ENABLE
  55         sc520_enable_ecc();
  56 #endif
  57
  58         return 0;
  59 }
  60
  61 static inline void sc520_dummy_write(void)
  62 {
  63         writew(0x0000, CACHELINESZ);
  64 }
  65 static inline void sc520_issue_sdram_op_mode_select(u8 command)
  66 {
  67         writeb(command, &sc520_mmcr->drcctl);
  68         sc520_dummy_write();
  69 }
  70
  71 static inline int check_long(u32 test_long)
  72 {
  73         u8 i;
  74         u8 tmp_byte = (u8)(test_long & 0x000000ff);
  75
  76         for (i = 1; i < 4; i++) {
  77                 if ((u8)((test_long >> (i * 8)) & 0x000000ff) != tmp_byte)
  78                                 return -1;
  79         }
  80
  81         return 0;
  82 }
  83
  84 static inline int write_and_test(u32 data, u32 address)
  85 {
  86         writel(data, address);
  87         if (readl(address) == data)
  88                 return 0; /* Good */
  89         else
  90                 return -1; /* Bad */
  91 }
  92
  93 static void sc520_enable_sdram(void)
  94 {
  95         u32 par_config;
  96
  97         /* Enable Writes, Caching and Code Execution to SDRAM */
  98         par_config = readl(&sc520_mmcr->par[3]);
  99         par_config &= ~(SC520_PAR_EXEC_DIS |
 100                         SC520_PAR_CACHE_DIS |
 101                         SC520_PAR_WRITE_DIS);
 102         writel(par_config, &sc520_mmcr->par[3]);
 103
 104         par_config = readl(&sc520_mmcr->par[4]);
 105         par_config &= ~(SC520_PAR_EXEC_DIS |
 106                         SC520_PAR_CACHE_DIS |
 107                         SC520_PAR_WRITE_DIS);
 108         writel(par_config, &sc520_mmcr->par[4]);
 109 }
 110
 111 static void sc520_set_dram_timing(void)
 112 {
 113         u8 drctmctl = 0x00;
 114
 115 #if defined CONFIG_SYS_SDRAM_DRCTMCTL
 116         /* just have your hardware designer _GIVE_ you what you need here! */
 117         drctmctl = CONFIG_SYS_SDRAM_DRCTMCTL;
 118 #else
 119         switch (CONFIG_SYS_SDRAM_RAS_CAS_DELAY) {
 120         case 2:
 121                 break;
 122         case 3:
 123                 drctmctl |= 0x01;
 124                 break;
 125         case 4:
 126         default:
 127                 drctmctl |= 0x02;
 128                 break;
 129         }
 130
 131         switch (CONFIG_SYS_SDRAM_PRECHARGE_DELAY) {
 132         case 2:
 133                 break;
 134         case 3:
 135                 drctmctl |= 0x04;
 136                 break;
 137         case 4:
 138         default:
 139                 drctmctl |= 0x08;
 140                 break;
 141
 142         case 6:
 143                 drctmctl |= 0x0c;
 144                 break;
 145         }
 146
 147         switch (CONFIG_SYS_SDRAM_CAS_LATENCY) {
 148         case 2:
 149                 break;
 150         case 3:
 151         default:
 152                 drctmctl |= 0x10;
 153                 break;
 154         }
 155 #endif
 156         writeb(drctmctl, &sc520_mmcr->drctmctl);
 157
 158         /* Issue load mode register command */
 159         sc520_issue_sdram_op_mode_select(0x03);
 160 }
 161
 162 static void sc520_set_dram_refresh_rate(void)
 163 {
 164         u8 drctl;
 165
 166         drctl = readb(&sc520_mmcr->drcctl);
 167         drctl &= 0xcf;
 168
 169         switch (CONFIG_SYS_SDRAM_REFRESH_RATE) {
 170         case 78:
 171                 break;
 172         case 156:
 173         default:
 174                 drctl |= 0x10;
 175                 break;
 176         case 312:
 177                 drctl |= 0x20;
 178                 break;
 179         case 624:
 180                 drctl |= 0x30;
 181                 break;
 182         }
 183
 184         writeb(drctl, &sc520_mmcr->drcctl);
 185 }
 186
 187 static void sc520_enable_dram_refresh(void)
 188 {
 189         u8 drctl;
 190
 191         drctl = readb(&sc520_mmcr->drcctl);
 192         drctl &= 0x30; /* keep refresh rate */
 193         drctl |= 0x08; /* enable refresh, normal mode */
 194
 195         writeb(drctl, &sc520_mmcr->drcctl);
 196 }
 197
 198 static void sc520_get_bank_info(int bank, struct sc520_sdram_info *bank_info)
 199 {
 200         u32 col_data;
 201         u32 row_data;
 202
 203         u32 drcbendadr;
 204         u16 drccfg;
 205
 206         u8 banks = 0x00;
 207         u8 columns = 0x00;
 208         u8 rows = 0x00;
 209
 210         bank_info->banks = 0x00;
 211         bank_info->columns = 0x00;
 212         bank_info->rows = 0x00;
 213         bank_info->size = 0x00;
 214
 215         if ((bank < 0) || (bank > 3)) {
 216                 printf("Bad Bank ID\n");
 217                 return;
 218         }
 219
 220         /* Save configuration */
 221         drcbendadr = readl(&sc520_mmcr->drcbendadr);
 222         drccfg = readw(&sc520_mmcr->drccfg);
 223
 224         /* Setup SDRAM Bank to largest possible size */
 225         writew(0x000b << (bank * 4), &sc520_mmcr->drccfg);
 226
 227         /* Set ending address for this bank */
 228         writel(0x000000ff << (bank * 8), &sc520_mmcr->drcbendadr);
 229
 230         /* write col 11 wrap adr */
 231         if (write_and_test(COL11_DATA, COL11_ADR) != 0)
 232                 goto restore_and_exit;
 233
 234         /* write col 10 wrap adr */
 235         if (write_and_test(COL10_DATA, COL10_ADR) != 0)
 236                 goto restore_and_exit;
 237
 238         /* write col 9 wrap adr */
 239         if (write_and_test(COL09_DATA, COL09_ADR) != 0)
 240                 goto restore_and_exit;
 241
 242         /* write col 8 wrap adr */
 243         if (write_and_test(COL08_DATA, COL08_ADR) != 0)
 244                 goto restore_and_exit;
 245
 246         col_data = readl(COL11_ADR);
 247
 248         /* All four bytes in the read long must be the same */
 249         if (check_long(col_data) < 0)
 250                 goto restore_and_exit;
 251
 252         if ((col_data >= COL08_DATA) && (col_data <= COL11_DATA))
 253                 columns = (u8)(col_data & 0x000000ff);
 254         else
 255                 goto restore_and_exit;
 256
 257         /* write row 14 wrap adr */
 258         if (write_and_test(ROW14_DATA, ROW14_ADR) != 0)
 259                 goto restore_and_exit;
 260
 261         /* write row 13 wrap adr */
 262         if (write_and_test(ROW13_DATA, ROW13_ADR) != 0)
 263                 goto restore_and_exit;
 264
 265         /* write row 12 wrap adr */
 266         if (write_and_test(ROW12_DATA, ROW12_ADR) != 0)
 267                 goto restore_and_exit;
 268
 269         /* write row 11 wrap adr */
 270         if (write_and_test(ROW11_DATA, ROW11_ADR) != 0)
 271                 goto restore_and_exit;
 272
 273         if (write_and_test(ROW10_DATA, ROW10_ADR) != 0)
 274                 goto restore_and_exit;
 275
 276         /*
 277          * read data @ row 12 wrap adr to determine number of banks,
 278          * and read data @ row 14 wrap adr to determine number of rows.
 279          * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
 280          * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
 281          * if data @ row 12 wrap == 11 or 12, we have 4 banks,
 282          */
 283         row_data = readl(ROW12_ADR);
 284
 285         /* All four bytes in the read long must be the same */
 286         if (check_long(row_data) != 0)
 287                 goto restore_and_exit;
 288
 289         switch (row_data) {
 290         case ROW10_DATA:
 291                 banks = 2;
 292                 break;
 293
 294         case ROW11_DATA:
 295         case ROW12_DATA:
 296                 banks = 4;
 297                 break;
 298
 299         default:
 300                 goto restore_and_exit;
 301         }
 302
 303         row_data = readl(ROW14_ADR);
 304
 305         /* All four bytes in the read long must be the same */
 306         if (check_long(row_data) != 0)
 307                 goto restore_and_exit;
 308
 309         switch (row_data) {
 310         case ROW11_DATA:
 311         case ROW12_DATA:
 312         case ROW13_DATA:
 313         case ROW14_DATA:
 314                 rows = (u8)(row_data & 0x000000ff);
 315                 break;
 316
 317         default:
 318                 goto restore_and_exit;
 319         }
 320
 321         bank_info->banks = banks;
 322         bank_info->columns = columns;
 323         bank_info->rows = rows;
 324
 325         if ((bank_info->banks != 0) &&
 326             (bank_info->columns != 0) &&
 327             (bank_info->rows != 0)) {
 328                 bank_info->size = bank_info->rows;
 329                 bank_info->size >>= (11 - bank_info->columns);
 330                 bank_info->size++;
 331         }
 332
 333 restore_and_exit:
 334         /* Restore configuration */
 335         writel(drcbendadr, &sc520_mmcr->drcbendadr);
 336         writew(drccfg, &sc520_mmcr->drccfg);
 337 }
 338
 339 static void sc520_setup_sizemem(void)
 340 {
 341         u8 i;
 342
 343         /* Disable write buffer */
 344         writeb(0x00, &sc520_mmcr->dbctl);
 345
 346         /* Disable ECC */
 347         writeb(0x00, &sc520_mmcr->eccctl);
 348
 349         /* Set slowest SDRAM timing */
 350         writeb(0x1e, &sc520_mmcr->drctmctl);
 351
 352         /* Issue a NOP to all SDRAM banks */
 353         sc520_issue_sdram_op_mode_select(0x01);
 354
 355         /* Delay for 100 microseconds */
 356         udelay(100);
 357
 358         /* Issue 'All Banks Precharge' command */
 359         sc520_issue_sdram_op_mode_select(0x02);
 360
 361         /* Issue 2 'Auto Refresh Enable' command */
 362         sc520_issue_sdram_op_mode_select(0x04);
 363         sc520_dummy_write();
 364
 365         /* Issue 'Load Mode Register' command */
 366         sc520_issue_sdram_op_mode_select(0x03);
 367
 368         /* Issue 8 more 'Auto Refresh Enable' commands */
 369         sc520_issue_sdram_op_mode_select(0x04);
 370         for (i = 0; i < 7; i++)
 371                 sc520_dummy_write();
 372
 373         /* Set control register to 'Normal Mode' */
 374         writeb(0x00, &sc520_mmcr->drcctl);
 375 }
 376
 377 static void sc520_sizemem(void)
 378 {
 379         struct sc520_sdram_info sdram_info[4];
 380         u8 bank_config = 0x00;
 381         u8 end_addr = 0x00;
 382         u16 drccfg = 0x0000;
 383         u32 drcbendadr = 0x00000000;
 384         u8 i;
 385
 386         /* Use PARs to disable caching of maximum allowable 256MB SDRAM */
 387         writel(SC520_SDRAM1_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[3]);
 388         writel(SC520_SDRAM2_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[4]);
 389
 390         sc520_setup_sizemem();
 391
 392         gd->ram_size = 0;
 393
 394         /* Size each SDRAM bank */
 395         for (i = 0; i <= 3; i++) {
 396                 sc520_get_bank_info(i, &sdram_info[i]);
 397
 398                 if (sdram_info[i].banks != 0) {
 399                         /* Update Configuration register */
 400                         bank_config = sdram_info[i].columns - 8;
 401
 402                         if (sdram_info[i].banks == 4)
 403                                 bank_config |= 0x08;
 404
 405                         drccfg |= bank_config << (i * 4);
 406
 407                         /* Update End Address register */
 408                         end_addr += sdram_info[i].size;
 409                         drcbendadr |= (end_addr | 0x80) << (i * 8);
 410
 411                         gd->ram_size += sdram_info[i].size << 22;
 412                 }
 413
 414                 /* Issue 'All Banks Precharge' command */
 415                 sc520_issue_sdram_op_mode_select(0x02);
 416
 417                 /* Set control register to 'Normal Mode' */
 418                 writeb(0x00, &sc520_mmcr->drcctl);
 419         }
 420
 421         writel(drcbendadr, &sc520_mmcr->drcbendadr);
 422         writew(drccfg, &sc520_mmcr->drccfg);
 423
 424         /* Clear PARs preventing caching of SDRAM */
 425         writel(0x00000000, &sc520_mmcr->par[3]);
 426         writel(0x00000000, &sc520_mmcr->par[4]);
 427 }
 428
 429 #if CONFIG_SYS_SDRAM_ECC_ENABLE
 430 static void sc520_enable_ecc(void)
 431
 432         /* A nominal memory test: just a byte at each address line */
 433         movl    %eax, %ecx
 434         shrl    $0x1, %ecx
 435         movl    $0x1, %edi
 436 memtest0:
 437         movb    $0xa5, (%edi)
 438         cmpb    $0xa5, (%edi)
 439         jne     out
 440         shrl    $0x1, %ecx
 441         andl    %ecx, %ecx
 442         jz      set_ecc
 443         shll    $0x1, %edi
 444         jmp     memtest0
 445
 446 set_ecc:
 447         /* clear all ram with a memset */
 448         movl    %eax, %ecx
 449         xorl    %esi, %esi
 450         xorl    %edi, %edi
 451         xorl    %eax, %eax
 452         shrl    $0x2, %ecx
 453         cld
 454         rep     stosl
 455
 456         /* enable read, write buffers */
 457         movb    $0x11, %al
 458         movl    $DBCTL, %edi
 459         movb    %al, (%edi)
 460
 461         /* enable NMI mapping for ECC */
 462         movl    $ECCINT, %edi
 463         movb    $0x10, %al
 464         movb    %al, (%edi)
 465
 466         /* Turn on ECC */
 467         movl    $ECCCTL, %edi
 468         movb    $0x05, %al
 469         movb    %al,(%edi)
 470
 471 out:
 472         jmp     init_ecc_ret
 473 }
 474 #endif
 475
 476 int dram_init(void)
 477 {
 478         ulong dram_ctrl;
 479         ulong dram_present = 0x00000000;
 480
 481         /*
 482          * We read-back the configuration of the dram
 483          * controller that the assembly code wrote
 484          */
 485         dram_ctrl = readl(&sc520_mmcr->drcbendadr);
 486
 487         gd->bd->bi_dram[0].start = 0;
 488         if (dram_ctrl & 0x80) {
 489                 /* bank 0 enabled */
 490                 gd->bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
 491                 dram_present = gd->bd->bi_dram[1].start;
 492                 gd->bd->bi_dram[0].size = gd->bd->bi_dram[1].start;
 493         } else {
 494                 gd->bd->bi_dram[0].size = 0;
 495                 gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start;
 496         }
 497
 498         if (dram_ctrl & 0x8000) {
 499                 /* bank 1 enabled */
 500                 gd->bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
 501                 dram_present = gd->bd->bi_dram[2].start;
 502                 gd->bd->bi_dram[1].size = gd->bd->bi_dram[2].start -
 503                                 gd->bd->bi_dram[1].start;
 504         } else {
 505                 gd->bd->bi_dram[1].size = 0;
 506                 gd->bd->bi_dram[2].start = gd->bd->bi_dram[1].start;
 507         }
 508
 509         if (dram_ctrl & 0x800000) {
 510                 /* bank 2 enabled */
 511                 gd->bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
 512                 dram_present = gd->bd->bi_dram[3].start;
 513                 gd->bd->bi_dram[2].size = gd->bd->bi_dram[3].start -
 514                                 gd->bd->bi_dram[2].start;
 515         } else {
 516                 gd->bd->bi_dram[2].size = 0;
 517                 gd->bd->bi_dram[3].start = gd->bd->bi_dram[2].start;
 518         }
 519
 520         if (dram_ctrl & 0x80000000) {
 521                 /* bank 3 enabled */
 522                 dram_present  = (dram_ctrl & 0x7f000000) >> 2;
 523                 gd->bd->bi_dram[3].size = dram_present -
 524                                 gd->bd->bi_dram[3].start;
 525         } else {
 526                 gd->bd->bi_dram[3].size = 0;
 527         }
 528
 529         gd->ram_size = dram_present;
 530
 531         return 0;
 532 }