arch/x86/cpu/ivybridge/sata.c

   1 /*
   2  * From Coreboot
   3  * Copyright (C) 2008-2009 coresystems GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0
   6  */
   7
   8 #include <common.h>
   9 #include <dm.h>
  10 #include <fdtdec.h>
  11 #include <asm/io.h>
  12 #include <asm/pci.h>
  13 #include <asm/arch/pch.h>
  14 #include <asm/arch/bd82x6x.h>
  15
  16 DECLARE_GLOBAL_DATA_PTR;
  17
  18 static inline u32 sir_read(struct udevice *dev, int idx)
  19 {
  20         u32 data;
  21
  22         dm_pci_write_config32(dev, SATA_SIRI, idx);
  23         dm_pci_read_config32(dev, SATA_SIRD, &data);
  24
  25         return data;
  26 }
  27
  28 static inline void sir_write(struct udevice *dev, int idx, u32 value)
  29 {
  30         dm_pci_write_config32(dev, SATA_SIRI, idx);
  31         dm_pci_write_config32(dev, SATA_SIRD, value);
  32 }
  33
  34 static void common_sata_init(struct udevice *dev, unsigned int port_map)
  35 {
  36         u32 reg32;
  37         u16 reg16;
  38
  39         /* Set IDE I/O Configuration */
  40         reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
  41         dm_pci_write_config32(dev, IDE_CONFIG, reg32);
  42
  43         /* Port enable */
  44         dm_pci_read_config16(dev, 0x92, &reg16);
  45         reg16 &= ~0x3f;
  46         reg16 |= port_map;
  47         dm_pci_write_config16(dev, 0x92, reg16);
  48
  49         /* SATA Initialization register */
  50         port_map &= 0xff;
  51         dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
  52 }
  53
  54 static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch)
  55 {
  56         unsigned int port_map, speed_support, port_tx;
  57         const void *blob = gd->fdt_blob;
  58         int node = dev->of_offset;
  59         const char *mode;
  60         u32 reg32;
  61         u16 reg16;
  62
  63         debug("SATA: Initializing...\n");
  64
  65         /* SATA configuration */
  66         port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
  67         speed_support = fdtdec_get_int(blob, node,
  68                                        "sata_interface_speed_support", 0);
  69
  70         mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
  71         if (!mode || !strcmp(mode, "ahci")) {
  72                 u32 abar;
  73
  74                 debug("SATA: Controller in AHCI mode\n");
  75
  76                 /* Set timings */
  77                 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
  78                                 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
  79                                 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
  80                 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
  81                                 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
  82
  83                 /* Sync DMA */
  84                 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
  85                 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
  86
  87                 common_sata_init(dev, 0x8000 | port_map);
  88
  89                 /* Initialize AHCI memory-mapped space */
  90                 abar = dm_pci_read_bar32(dev, 5);
  91                 debug("ABAR: %08X\n", abar);
  92                 /* CAP (HBA Capabilities) : enable power management */
  93                 reg32 = readl(abar + 0x00);
  94                 reg32 |= 0x0c006000;  /* set PSC+SSC+SALP+SSS */
  95                 reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
  96                 /* Set ISS, if available */
  97                 if (speed_support) {
  98                         reg32 &= ~0x00f00000;
  99                         reg32 |= (speed_support & 0x03) << 20;
 100                 }
 101                 writel(reg32, abar + 0x00);
 102                 /* PI (Ports implemented) */
 103                 writel(port_map, abar + 0x0c);
 104                 (void) readl(abar + 0x0c); /* Read back 1 */
 105                 (void) readl(abar + 0x0c); /* Read back 2 */
 106                 /* CAP2 (HBA Capabilities Extended)*/
 107                 reg32 = readl(abar + 0x24);
 108                 reg32 &= ~0x00000002;
 109                 writel(reg32, abar + 0x24);
 110                 /* VSP (Vendor Specific Register */
 111                 reg32 = readl(abar + 0xa0);
 112                 reg32 &= ~0x00000005;
 113                 writel(reg32, abar + 0xa0);
 114         } else if (!strcmp(mode, "combined")) {
 115                 debug("SATA: Controller in combined mode\n");
 116
 117                 /* No AHCI: clear AHCI base */
 118                 dm_pci_write_bar32(dev, 5, 0x00000000);
 119                 /* And without AHCI BAR no memory decoding */
 120                 dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
 121                 reg16 &= ~PCI_COMMAND_MEMORY;
 122                 dm_pci_write_config16(dev, PCI_COMMAND, reg16);
 123
 124                 dm_pci_write_config8(dev, 0x09, 0x80);
 125
 126                 /* Set timings */
 127                 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 128                                 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
 129                 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 130                                 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 131                                 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
 132
 133                 /* Sync DMA */
 134                 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
 135                 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
 136
 137                 common_sata_init(dev, port_map);
 138         } else {
 139                 debug("SATA: Controller in plain-ide mode\n");
 140
 141                 /* No AHCI: clear AHCI base */
 142                 dm_pci_write_bar32(dev, 5, 0x00000000);
 143
 144                 /* And without AHCI BAR no memory decoding */
 145                 dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
 146                 reg16 &= ~PCI_COMMAND_MEMORY;
 147                 dm_pci_write_config16(dev, PCI_COMMAND, reg16);
 148
 149                 /*
 150                  * Native mode capable on both primary and secondary (0xa)
 151                  * OR'ed with enabled (0x50) = 0xf
 152                  */
 153                 dm_pci_write_config8(dev, 0x09, 0x8f);
 154
 155                 /* Set timings */
 156                 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 157                                 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 158                                 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
 159                 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 160                                 IDE_SITRE | IDE_ISP_3_CLOCKS |
 161                                 IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
 162
 163                 /* Sync DMA */
 164                 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
 165                 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
 166
 167                 common_sata_init(dev, port_map);
 168         }
 169
 170         /* Set Gen3 Transmitter settings if needed */
 171         port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
 172         if (port_tx)
 173                 pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx);
 174
 175         port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
 176         if (port_tx)
 177                 pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx);
 178
 179         /* Additional Programming Requirements */
 180         sir_write(dev, 0x04, 0x00001600);
 181         sir_write(dev, 0x28, 0xa0000033);
 182         reg32 = sir_read(dev, 0x54);
 183         reg32 &= 0xff000000;
 184         reg32 |= 0x5555aa;
 185         sir_write(dev, 0x54, reg32);
 186         sir_write(dev, 0x64, 0xcccc8484);
 187         reg32 = sir_read(dev, 0x68);
 188         reg32 &= 0xffff0000;
 189         reg32 |= 0xcccc;
 190         sir_write(dev, 0x68, reg32);
 191         reg32 = sir_read(dev, 0x78);
 192         reg32 &= 0x0000ffff;
 193         reg32 |= 0x88880000;
 194         sir_write(dev, 0x78, reg32);
 195         sir_write(dev, 0x84, 0x001c7000);
 196         sir_write(dev, 0x88, 0x88338822);
 197         sir_write(dev, 0xa0, 0x001c7000);
 198         sir_write(dev, 0xc4, 0x0c0c0c0c);
 199         sir_write(dev, 0xc8, 0x0c0c0c0c);
 200         sir_write(dev, 0xd4, 0x10000000);
 201
 202         pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000);
 203         pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100);
 204 }
 205
 206 static void bd82x6x_sata_enable(struct udevice *dev)
 207 {
 208         const void *blob = gd->fdt_blob;
 209         int node = dev->of_offset;
 210         unsigned port_map;
 211         const char *mode;
 212         u16 map = 0;
 213
 214         /*
 215          * Set SATA controller mode early so the resource allocator can
 216          * properly assign IO/Memory resources for the controller.
 217          */
 218         mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
 219         if (mode && !strcmp(mode, "ahci"))
 220                 map = 0x0060;
 221         port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
 222
 223         map |= (port_map ^ 0x3f) << 8;
 224         dm_pci_write_config16(dev, 0x90, map);
 225 }
 226
 227 static int bd82x6x_sata_probe(struct udevice *dev)
 228 {
 229         struct udevice *pch;
 230         int ret;
 231
 232         ret = uclass_first_device(UCLASS_PCH, &pch);
 233         if (ret)
 234                 return ret;
 235         if (!pch)
 236                 return -ENODEV;
 237
 238         if (!(gd->flags & GD_FLG_RELOC))
 239                 bd82x6x_sata_enable(dev);
 240         else
 241                 bd82x6x_sata_init(dev, pch);
 242
 243         return 0;
 244 }
 245
 246 static const struct udevice_id bd82x6x_ahci_ids[] = {
 247         { .compatible = "intel,pantherpoint-ahci" },
 248         { }
 249 };
 250
 251 U_BOOT_DRIVER(ahci_ivybridge_drv) = {
 252         .name           = "ahci_ivybridge",
 253         .id             = UCLASS_DISK,
 254         .of_match       = bd82x6x_ahci_ids,
 255         .probe          = bd82x6x_sata_probe,
 256 };