2 * Copyright (C) 2009 Renesas Solutions Corp.
4 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/sh_mmcif.h>
16 #include <linux/mmc/sh_mobile_sdhi.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/gpio.h>
19 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/regulator/fixed.h>
23 #include <linux/regulator/machine.h>
24 #include <linux/usb/r8a66597.h>
25 #include <linux/usb/renesas_usbhs.h>
26 #include <linux/i2c.h>
27 #include <linux/i2c/tsc2007.h>
28 #include <linux/spi/spi.h>
29 #include <linux/spi/sh_msiof.h>
30 #include <linux/spi/mmc_spi.h>
31 #include <linux/input.h>
32 #include <linux/input/sh_keysc.h>
33 #include <linux/sh_eth.h>
34 #include <linux/sh_intc.h>
35 #include <linux/videodev2.h>
36 #include <video/sh_mobile_lcdc.h>
37 #include <sound/sh_fsi.h>
38 #include <sound/simple_card.h>
39 #include <media/sh_mobile_ceu.h>
40 #include <media/soc_camera.h>
41 #include <media/tw9910.h>
42 #include <media/mt9t112.h>
43 #include <asm/heartbeat.h>
44 #include <asm/clock.h>
45 #include <asm/suspend.h>
46 #include <cpu/sh7724.h>
49 * Address Interface BusWidth
50 *-----------------------------------------
51 * 0x0000_0000 uboot 16bit
52 * 0x0004_0000 Linux romImage 16bit
53 * 0x0014_0000 MTD for Linux 16bit
54 * 0x0400_0000 Internal I/O 16/32bit
55 * 0x0800_0000 DRAM 32bit
56 * 0x1800_0000 MFI 16bit
60 *------------------------------
61 * DS2[1] = FlashROM write protect ON : write protect
62 * OFF : No write protect
63 * DS2[2] = RMII / TS, SCIF ON : RMII
65 * DS2[3] = Camera / Video ON : Camera
67 * DS2[5] = NTSC_OUT Clock ON : On board OSC
69 * DS2[6-7] = MMC / SD ON-OFF : SD
76 * it needs amixer settings for playing
78 * amixer set 'HeadPhone' 80
79 * amixer set 'Out Mixer Left DAC Left' on
80 * amixer set 'Out Mixer Right DAC Right' on
84 static unsigned char led_pos[] = { 0, 1, 2, 3 };
86 static struct heartbeat_data heartbeat_data = {
91 static struct resource heartbeat_resource = {
92 .start = 0xA405012C, /* PTG */
93 .end = 0xA405012E - 1,
94 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
97 static struct platform_device heartbeat_device = {
101 .platform_data = &heartbeat_data,
104 .resource = &heartbeat_resource,
108 static struct mtd_partition nor_flash_partitions[] = {
110 .name = "boot loader",
112 .size = (5 * 1024 * 1024),
113 .mask_flags = MTD_WRITEABLE, /* force read-only */
116 .offset = MTDPART_OFS_APPEND,
117 .size = MTDPART_SIZ_FULL,
121 static struct physmap_flash_data nor_flash_data = {
123 .parts = nor_flash_partitions,
124 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
127 static struct resource nor_flash_resources[] = {
132 .flags = IORESOURCE_MEM,
136 static struct platform_device nor_flash_device = {
137 .name = "physmap-flash",
138 .resource = nor_flash_resources,
139 .num_resources = ARRAY_SIZE(nor_flash_resources),
141 .platform_data = &nor_flash_data,
146 #define SH_ETH_ADDR (0xA4600000)
147 static struct resource sh_eth_resources[] = {
149 .start = SH_ETH_ADDR,
150 .end = SH_ETH_ADDR + 0x1FC,
151 .flags = IORESOURCE_MEM,
154 .start = evt2irq(0xd60),
155 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
159 static struct sh_eth_plat_data sh_eth_plat = {
160 .phy = 0x1f, /* SMSC LAN8700 */
161 .edmac_endian = EDMAC_LITTLE_ENDIAN,
162 .register_type = SH_ETH_REG_FAST_SH4,
163 .phy_interface = PHY_INTERFACE_MODE_MII,
164 .ether_link_active_low = 1
167 static struct platform_device sh_eth_device = {
171 .platform_data = &sh_eth_plat,
173 .num_resources = ARRAY_SIZE(sh_eth_resources),
174 .resource = sh_eth_resources,
178 static void usb0_port_power(int port, int power)
180 gpio_set_value(GPIO_PTB4, power);
183 static struct r8a66597_platdata usb0_host_data = {
185 .port_power = usb0_port_power,
188 static struct resource usb0_host_resources[] = {
191 .end = 0xa4d80124 - 1,
192 .flags = IORESOURCE_MEM,
195 .start = evt2irq(0xa20),
196 .end = evt2irq(0xa20),
197 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
201 static struct platform_device usb0_host_device = {
202 .name = "r8a66597_hcd",
205 .dma_mask = NULL, /* not use dma */
206 .coherent_dma_mask = 0xffffffff,
207 .platform_data = &usb0_host_data,
209 .num_resources = ARRAY_SIZE(usb0_host_resources),
210 .resource = usb0_host_resources,
213 /* USB1 host/function */
214 static void usb1_port_power(int port, int power)
216 gpio_set_value(GPIO_PTB5, power);
219 static struct r8a66597_platdata usb1_common_data = {
221 .port_power = usb1_port_power,
224 static struct resource usb1_common_resources[] = {
227 .end = 0xa4d90124 - 1,
228 .flags = IORESOURCE_MEM,
231 .start = evt2irq(0xa40),
232 .end = evt2irq(0xa40),
233 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
237 static struct platform_device usb1_common_device = {
238 /* .name will be added in arch_setup */
241 .dma_mask = NULL, /* not use dma */
242 .coherent_dma_mask = 0xffffffff,
243 .platform_data = &usb1_common_data,
245 .num_resources = ARRAY_SIZE(usb1_common_resources),
246 .resource = usb1_common_resources,
252 static int usbhs_get_id(struct platform_device *pdev)
254 return gpio_get_value(GPIO_PTB3);
257 static void usbhs_phy_reset(struct platform_device *pdev)
259 /* enable vbus if HOST */
260 if (!gpio_get_value(GPIO_PTB3))
261 gpio_set_value(GPIO_PTB5, 1);
264 static struct renesas_usbhs_platform_info usbhs_info = {
265 .platform_callback = {
266 .get_id = usbhs_get_id,
267 .phy_reset = usbhs_phy_reset,
271 .detection_delay = 5,
272 .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
273 .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
274 .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
275 .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
279 static struct resource usbhs_resources[] = {
282 .end = 0xa4d90124 - 1,
283 .flags = IORESOURCE_MEM,
286 .start = evt2irq(0xa40),
287 .end = evt2irq(0xa40),
288 .flags = IORESOURCE_IRQ,
292 static struct platform_device usbhs_device = {
293 .name = "renesas_usbhs",
296 .dma_mask = NULL, /* not use dma */
297 .coherent_dma_mask = 0xffffffff,
298 .platform_data = &usbhs_info,
300 .num_resources = ARRAY_SIZE(usbhs_resources),
301 .resource = usbhs_resources,
305 static const struct fb_videomode ecovec_lcd_modes[] = {
316 .sync = 0, /* hsync and vsync are active low */
320 static const struct fb_videomode ecovec_dvi_modes[] = {
331 .sync = 0, /* hsync and vsync are active low */
335 static int ecovec24_set_brightness(int brightness)
337 gpio_set_value(GPIO_PTR1, brightness);
342 static struct sh_mobile_lcdc_info lcdc_info = {
344 .interface_type = RGB18,
345 .chan = LCDC_CHAN_MAINLCD,
346 .fourcc = V4L2_PIX_FMT_RGB565,
347 .panel_cfg = { /* 7.0 inch */
352 .name = "sh_mobile_lcdc_bl",
354 .set_brightness = ecovec24_set_brightness,
359 static struct resource lcdc_resources[] = {
364 .flags = IORESOURCE_MEM,
367 .start = evt2irq(0xf40),
368 .flags = IORESOURCE_IRQ,
372 static struct platform_device lcdc_device = {
373 .name = "sh_mobile_lcdc_fb",
374 .num_resources = ARRAY_SIZE(lcdc_resources),
375 .resource = lcdc_resources,
377 .platform_data = &lcdc_info,
382 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
383 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
386 static struct resource ceu0_resources[] = {
391 .flags = IORESOURCE_MEM,
394 .start = evt2irq(0x880),
395 .flags = IORESOURCE_IRQ,
398 /* place holder for contiguous memory */
402 static struct platform_device ceu0_device = {
403 .name = "sh_mobile_ceu",
404 .id = 0, /* "ceu0" clock */
405 .num_resources = ARRAY_SIZE(ceu0_resources),
406 .resource = ceu0_resources,
408 .platform_data = &sh_mobile_ceu0_info,
413 static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
414 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
417 static struct resource ceu1_resources[] = {
422 .flags = IORESOURCE_MEM,
425 .start = evt2irq(0x9e0),
426 .flags = IORESOURCE_IRQ,
429 /* place holder for contiguous memory */
433 static struct platform_device ceu1_device = {
434 .name = "sh_mobile_ceu",
435 .id = 1, /* "ceu1" clock */
436 .num_resources = ARRAY_SIZE(ceu1_resources),
437 .resource = ceu1_resources,
439 .platform_data = &sh_mobile_ceu1_info,
444 static struct i2c_board_info i2c0_devices[] = {
446 I2C_BOARD_INFO("da7210", 0x1a),
450 static struct i2c_board_info i2c1_devices[] = {
452 I2C_BOARD_INFO("r2025sd", 0x32),
455 I2C_BOARD_INFO("lis3lv02d", 0x1c),
456 .irq = evt2irq(0x620),
461 static struct sh_keysc_info keysc_info = {
462 .mode = SH_KEYSC_MODE_1,
466 .keycodes = { KEY_1, 0, 0, 0, 0,
471 KEY_6, 0, 0, 0, 0, },
474 static struct resource keysc_resources[] = {
479 .flags = IORESOURCE_MEM,
482 .start = evt2irq(0xbe0),
483 .flags = IORESOURCE_IRQ,
487 static struct platform_device keysc_device = {
489 .id = 0, /* keysc0 clock */
490 .num_resources = ARRAY_SIZE(keysc_resources),
491 .resource = keysc_resources,
493 .platform_data = &keysc_info,
498 #define IRQ0 evt2irq(0x600)
500 static int ts_get_pendown_state(void)
503 gpio_free(GPIO_FN_INTC_IRQ0);
504 gpio_request(GPIO_PTZ0, NULL);
505 gpio_direction_input(GPIO_PTZ0);
507 val = gpio_get_value(GPIO_PTZ0);
509 gpio_free(GPIO_PTZ0);
510 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
515 static int ts_init(void)
517 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
521 static struct tsc2007_platform_data tsc2007_info = {
524 .get_pendown_state = ts_get_pendown_state,
525 .init_platform_hw = ts_init,
528 static struct i2c_board_info ts_i2c_clients = {
529 I2C_BOARD_INFO("tsc2007", 0x48),
531 .platform_data = &tsc2007_info,
535 static struct regulator_consumer_supply cn12_power_consumers[] =
537 REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
538 REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
539 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
540 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
543 static struct regulator_init_data cn12_power_init_data = {
545 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
547 .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
548 .consumer_supplies = cn12_power_consumers,
551 static struct fixed_voltage_config cn12_power_info = {
552 .supply_name = "CN12 SD/MMC Vdd",
553 .microvolts = 3300000,
556 .init_data = &cn12_power_init_data,
559 static struct platform_device cn12_power = {
560 .name = "reg-fixed-voltage",
563 .platform_data = &cn12_power_info,
567 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
569 static struct regulator_consumer_supply sdhi0_power_consumers[] =
571 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
572 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
575 static struct regulator_init_data sdhi0_power_init_data = {
577 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
579 .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
580 .consumer_supplies = sdhi0_power_consumers,
583 static struct fixed_voltage_config sdhi0_power_info = {
584 .supply_name = "CN11 SD/MMC Vdd",
585 .microvolts = 3300000,
588 .init_data = &sdhi0_power_init_data,
591 static struct platform_device sdhi0_power = {
592 .name = "reg-fixed-voltage",
595 .platform_data = &sdhi0_power_info,
599 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
601 static int power_gpio = -EINVAL;
603 if (power_gpio < 0) {
604 int ret = gpio_request(GPIO_PTB6, NULL);
606 power_gpio = GPIO_PTB6;
607 gpio_direction_output(power_gpio, 0);
612 * Toggle the GPIO regardless, whether we managed to grab it above or
613 * the fixed regulator driver did.
615 gpio_set_value(GPIO_PTB6, state);
618 static int sdhi0_get_cd(struct platform_device *pdev)
620 return !gpio_get_value(GPIO_PTY7);
623 static struct sh_mobile_sdhi_info sdhi0_info = {
624 .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
625 .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
626 .set_pwr = sdhi0_set_pwr,
627 .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
629 .get_cd = sdhi0_get_cd,
632 static struct resource sdhi0_resources[] = {
637 .flags = IORESOURCE_MEM,
640 .start = evt2irq(0xe80),
641 .flags = IORESOURCE_IRQ,
645 static struct platform_device sdhi0_device = {
646 .name = "sh_mobile_sdhi",
647 .num_resources = ARRAY_SIZE(sdhi0_resources),
648 .resource = sdhi0_resources,
651 .platform_data = &sdhi0_info,
655 static void cn12_set_pwr(struct platform_device *pdev, int state)
657 static int power_gpio = -EINVAL;
659 if (power_gpio < 0) {
660 int ret = gpio_request(GPIO_PTB7, NULL);
662 power_gpio = GPIO_PTB7;
663 gpio_direction_output(power_gpio, 0);
668 * Toggle the GPIO regardless, whether we managed to grab it above or
669 * the fixed regulator driver did.
671 gpio_set_value(GPIO_PTB7, state);
674 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
676 static int sdhi1_get_cd(struct platform_device *pdev)
678 return !gpio_get_value(GPIO_PTW7);
681 static struct sh_mobile_sdhi_info sdhi1_info = {
682 .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
683 .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
684 .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
686 .set_pwr = cn12_set_pwr,
687 .get_cd = sdhi1_get_cd,
690 static struct resource sdhi1_resources[] = {
695 .flags = IORESOURCE_MEM,
698 .start = evt2irq(0x4e0),
699 .flags = IORESOURCE_IRQ,
703 static struct platform_device sdhi1_device = {
704 .name = "sh_mobile_sdhi",
705 .num_resources = ARRAY_SIZE(sdhi1_resources),
706 .resource = sdhi1_resources,
709 .platform_data = &sdhi1_info,
712 #endif /* CONFIG_MMC_SH_MMCIF */
717 static int mmc_spi_get_ro(struct device *dev)
719 return gpio_get_value(GPIO_PTY6);
722 static int mmc_spi_get_cd(struct device *dev)
724 return !gpio_get_value(GPIO_PTY7);
727 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
729 gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
732 static struct mmc_spi_platform_data mmc_spi_info = {
733 .get_ro = mmc_spi_get_ro,
734 .get_cd = mmc_spi_get_cd,
735 .caps = MMC_CAP_NEEDS_POLL,
736 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
737 .setpower = mmc_spi_setpower,
740 static struct spi_board_info spi_bus[] = {
742 .modalias = "mmc_spi",
743 .platform_data = &mmc_spi_info,
744 .max_speed_hz = 5000000,
746 .controller_data = (void *) GPIO_PTM4,
751 static struct sh_msiof_spi_info msiof0_data = {
755 static struct resource msiof0_resources[] = {
760 .flags = IORESOURCE_MEM,
763 .start = evt2irq(0xc80),
764 .flags = IORESOURCE_IRQ,
768 static struct platform_device msiof0_device = {
769 .name = "spi_sh_msiof",
770 .id = 0, /* MSIOF0 */
772 .platform_data = &msiof0_data,
774 .num_resources = ARRAY_SIZE(msiof0_resources),
775 .resource = msiof0_resources,
780 /* I2C Video/Camera */
781 static struct i2c_board_info i2c_camera[] = {
783 I2C_BOARD_INFO("tw9910", 0x45),
787 I2C_BOARD_INFO("mt9t112", 0x3c),
791 I2C_BOARD_INFO("mt9t112", 0x3c),
796 static int tw9910_power(struct device *dev, int mode)
798 int val = mode ? 0 : 1;
800 gpio_set_value(GPIO_PTU2, val);
807 static struct tw9910_video_info tw9910_info = {
808 .buswidth = SOCAM_DATAWIDTH_8,
809 .mpout = TW9910_MPO_FIELD,
812 static struct soc_camera_link tw9910_link = {
815 .power = tw9910_power,
816 .board_info = &i2c_camera[0],
817 .priv = &tw9910_info,
821 static int mt9t112_power1(struct device *dev, int mode)
823 gpio_set_value(GPIO_PTA3, mode);
830 static struct mt9t112_camera_info mt9t112_info1 = {
831 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
832 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
835 static struct soc_camera_link mt9t112_link1 = {
837 .power = mt9t112_power1,
839 .board_info = &i2c_camera[1],
840 .priv = &mt9t112_info1,
843 static int mt9t112_power2(struct device *dev, int mode)
845 gpio_set_value(GPIO_PTA4, mode);
852 static struct mt9t112_camera_info mt9t112_info2 = {
853 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
854 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
857 static struct soc_camera_link mt9t112_link2 = {
859 .power = mt9t112_power2,
861 .board_info = &i2c_camera[2],
862 .priv = &mt9t112_info2,
865 static struct platform_device camera_devices[] = {
867 .name = "soc-camera-pdrv",
870 .platform_data = &tw9910_link,
874 .name = "soc-camera-pdrv",
877 .platform_data = &mt9t112_link1,
881 .name = "soc-camera-pdrv",
884 .platform_data = &mt9t112_link2,
890 static struct resource fsi_resources[] = {
895 .flags = IORESOURCE_MEM,
898 .start = evt2irq(0xf80),
899 .flags = IORESOURCE_IRQ,
903 static struct platform_device fsi_device = {
906 .num_resources = ARRAY_SIZE(fsi_resources),
907 .resource = fsi_resources,
910 static struct asoc_simple_card_info fsi_da7210_info = {
912 .card = "FSIB-DA7210",
913 .codec = "da7210.0-001a",
914 .platform = "sh_fsi.0",
915 .daifmt = SND_SOC_DAIFMT_I2S,
918 .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF,
921 .name = "da7210-hifi",
922 .fmt = SND_SOC_DAIFMT_CBM_CFM,
926 static struct platform_device fsi_da7210_device = {
927 .name = "asoc-simple-card",
929 .platform_data = &fsi_da7210_info,
935 static struct resource irda_resources[] = {
940 .flags = IORESOURCE_MEM,
943 .start = evt2irq(0x480),
944 .flags = IORESOURCE_IRQ,
948 static struct platform_device irda_device = {
950 .num_resources = ARRAY_SIZE(irda_resources),
951 .resource = irda_resources,
954 #include <media/ak881x.h>
955 #include <media/sh_vou.h>
957 static struct ak881x_pdata ak881x_pdata = {
958 .flags = AK881X_IF_MODE_SLAVE,
961 static struct i2c_board_info ak8813 = {
962 I2C_BOARD_INFO("ak8813", 0x20),
963 .platform_data = &ak881x_pdata,
966 static struct sh_vou_pdata sh_vou_pdata = {
967 .bus_fmt = SH_VOU_BUS_8BIT,
968 .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
969 .board_info = &ak8813,
973 static struct resource sh_vou_resources[] = {
977 .flags = IORESOURCE_MEM,
980 .start = evt2irq(0x8e0),
981 .flags = IORESOURCE_IRQ,
985 static struct platform_device vou_device = {
988 .num_resources = ARRAY_SIZE(sh_vou_resources),
989 .resource = sh_vou_resources,
991 .platform_data = &sh_vou_pdata,
995 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
997 static void mmcif_down_pwr(struct platform_device *pdev)
999 cn12_set_pwr(pdev, 0);
1002 static struct resource sh_mmcif_resources[] = {
1005 .start = 0xA4CA0000,
1007 .flags = IORESOURCE_MEM,
1011 .start = evt2irq(0x5a0),
1012 .flags = IORESOURCE_IRQ,
1016 .start = evt2irq(0x5c0),
1017 .flags = IORESOURCE_IRQ,
1021 static struct sh_mmcif_plat_data sh_mmcif_plat = {
1022 .set_pwr = cn12_set_pwr,
1023 .down_pwr = mmcif_down_pwr,
1024 .sup_pclk = 0, /* SH7724: Max Pclk/2 */
1025 .caps = MMC_CAP_4_BIT_DATA |
1026 MMC_CAP_8_BIT_DATA |
1028 .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
1031 static struct platform_device sh_mmcif_device = {
1035 .platform_data = &sh_mmcif_plat,
1037 .num_resources = ARRAY_SIZE(sh_mmcif_resources),
1038 .resource = sh_mmcif_resources,
1042 static struct platform_device *ecovec_devices[] __initdata = {
1047 &usb1_common_device,
1054 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1057 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1070 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
1076 #define EEPROM_ADDR 0x50
1077 static u8 mac_read(struct i2c_adapter *a, u8 command)
1079 struct i2c_msg msg[2];
1083 msg[0].addr = EEPROM_ADDR;
1086 msg[0].buf = &command;
1088 msg[1].addr = EEPROM_ADDR;
1089 msg[1].flags = I2C_M_RD;
1093 ret = i2c_transfer(a, msg, 2);
1095 printk(KERN_ERR "error %d\n", ret);
1102 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
1104 struct i2c_adapter *a = i2c_get_adapter(1);
1108 pr_err("can not get I2C 1\n");
1112 /* read MAC address from EEPROM */
1113 for (i = 0; i < sizeof(pd->mac_addr); i++) {
1114 pd->mac_addr[i] = mac_read(a, 0x10 + i);
1121 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
1123 pr_err("unable to read sh_eth MAC address\n");
1127 #define PORT_HIZA 0xA4050158
1128 #define IODRIVEA 0xA405018A
1130 extern char ecovec24_sdram_enter_start;
1131 extern char ecovec24_sdram_enter_end;
1132 extern char ecovec24_sdram_leave_start;
1133 extern char ecovec24_sdram_leave_end;
1135 static int __init arch_setup(void)
1138 bool cn12_enabled = false;
1140 /* register board specific self-refresh code */
1141 sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
1143 &ecovec24_sdram_enter_start,
1144 &ecovec24_sdram_enter_end,
1145 &ecovec24_sdram_leave_start,
1146 &ecovec24_sdram_leave_end);
1148 /* enable STATUS0, STATUS2 and PDSTATUS */
1149 gpio_request(GPIO_FN_STATUS0, NULL);
1150 gpio_request(GPIO_FN_STATUS2, NULL);
1151 gpio_request(GPIO_FN_PDSTATUS, NULL);
1154 gpio_request(GPIO_FN_SCIF0_TXD, NULL);
1155 gpio_request(GPIO_FN_SCIF0_RXD, NULL);
1157 /* enable debug LED */
1158 gpio_request(GPIO_PTG0, NULL);
1159 gpio_request(GPIO_PTG1, NULL);
1160 gpio_request(GPIO_PTG2, NULL);
1161 gpio_request(GPIO_PTG3, NULL);
1162 gpio_direction_output(GPIO_PTG0, 0);
1163 gpio_direction_output(GPIO_PTG1, 0);
1164 gpio_direction_output(GPIO_PTG2, 0);
1165 gpio_direction_output(GPIO_PTG3, 0);
1166 __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
1169 gpio_request(GPIO_PTA1, NULL);
1170 gpio_direction_output(GPIO_PTA1, 1);
1173 gpio_request(GPIO_FN_RMII_RXD0, NULL);
1174 gpio_request(GPIO_FN_RMII_RXD1, NULL);
1175 gpio_request(GPIO_FN_RMII_TXD0, NULL);
1176 gpio_request(GPIO_FN_RMII_TXD1, NULL);
1177 gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
1178 gpio_request(GPIO_FN_RMII_TX_EN, NULL);
1179 gpio_request(GPIO_FN_RMII_RX_ER, NULL);
1180 gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
1181 gpio_request(GPIO_FN_MDIO, NULL);
1182 gpio_request(GPIO_FN_MDC, NULL);
1183 gpio_request(GPIO_FN_LNKSTA, NULL);
1186 __raw_writew(0x0000, 0xA4D80000);
1187 __raw_writew(0x0000, 0xA4D90000);
1188 gpio_request(GPIO_PTB3, NULL);
1189 gpio_request(GPIO_PTB4, NULL);
1190 gpio_request(GPIO_PTB5, NULL);
1191 gpio_direction_input(GPIO_PTB3);
1192 gpio_direction_output(GPIO_PTB4, 0);
1193 gpio_direction_output(GPIO_PTB5, 0);
1194 __raw_writew(0x0600, 0xa40501d4);
1195 __raw_writew(0x0600, 0xa4050192);
1197 if (gpio_get_value(GPIO_PTB3)) {
1198 printk(KERN_INFO "USB1 function is selected\n");
1199 usb1_common_device.name = "r8a66597_udc";
1201 printk(KERN_INFO "USB1 host is selected\n");
1202 usb1_common_device.name = "r8a66597_hcd";
1206 gpio_request(GPIO_FN_LCDD23, NULL);
1207 gpio_request(GPIO_FN_LCDD22, NULL);
1208 gpio_request(GPIO_FN_LCDD21, NULL);
1209 gpio_request(GPIO_FN_LCDD20, NULL);
1210 gpio_request(GPIO_FN_LCDD19, NULL);
1211 gpio_request(GPIO_FN_LCDD18, NULL);
1212 gpio_request(GPIO_FN_LCDD17, NULL);
1213 gpio_request(GPIO_FN_LCDD16, NULL);
1214 gpio_request(GPIO_FN_LCDD15, NULL);
1215 gpio_request(GPIO_FN_LCDD14, NULL);
1216 gpio_request(GPIO_FN_LCDD13, NULL);
1217 gpio_request(GPIO_FN_LCDD12, NULL);
1218 gpio_request(GPIO_FN_LCDD11, NULL);
1219 gpio_request(GPIO_FN_LCDD10, NULL);
1220 gpio_request(GPIO_FN_LCDD9, NULL);
1221 gpio_request(GPIO_FN_LCDD8, NULL);
1222 gpio_request(GPIO_FN_LCDD7, NULL);
1223 gpio_request(GPIO_FN_LCDD6, NULL);
1224 gpio_request(GPIO_FN_LCDD5, NULL);
1225 gpio_request(GPIO_FN_LCDD4, NULL);
1226 gpio_request(GPIO_FN_LCDD3, NULL);
1227 gpio_request(GPIO_FN_LCDD2, NULL);
1228 gpio_request(GPIO_FN_LCDD1, NULL);
1229 gpio_request(GPIO_FN_LCDD0, NULL);
1230 gpio_request(GPIO_FN_LCDDISP, NULL);
1231 gpio_request(GPIO_FN_LCDHSYN, NULL);
1232 gpio_request(GPIO_FN_LCDDCK, NULL);
1233 gpio_request(GPIO_FN_LCDVSYN, NULL);
1234 gpio_request(GPIO_FN_LCDDON, NULL);
1235 gpio_request(GPIO_FN_LCDLCLK, NULL);
1236 __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
1238 gpio_request(GPIO_PTE6, NULL);
1239 gpio_request(GPIO_PTU1, NULL);
1240 gpio_request(GPIO_PTR1, NULL);
1241 gpio_request(GPIO_PTA2, NULL);
1242 gpio_direction_input(GPIO_PTE6);
1243 gpio_direction_output(GPIO_PTU1, 0);
1244 gpio_direction_output(GPIO_PTR1, 0);
1245 gpio_direction_output(GPIO_PTA2, 0);
1247 /* I/O buffer drive ability is high */
1248 __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
1250 if (gpio_get_value(GPIO_PTE6)) {
1252 lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
1253 lcdc_info.ch[0].clock_divider = 1;
1254 lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes;
1255 lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes);
1257 gpio_set_value(GPIO_PTA2, 1);
1258 gpio_set_value(GPIO_PTU1, 1);
1261 lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
1262 lcdc_info.ch[0].clock_divider = 2;
1263 lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes;
1264 lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes);
1266 gpio_set_value(GPIO_PTR1, 1);
1270 * LCDDON control is needed for Panel,
1271 * but current sh_mobile_lcdc driver doesn't control it.
1272 * It is temporary correspondence
1274 gpio_request(GPIO_PTF4, NULL);
1275 gpio_direction_output(GPIO_PTF4, 1);
1277 /* enable TouchScreen */
1278 i2c_register_board_info(0, &ts_i2c_clients, 1);
1279 irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
1283 gpio_request(GPIO_FN_VIO0_D15, NULL);
1284 gpio_request(GPIO_FN_VIO0_D14, NULL);
1285 gpio_request(GPIO_FN_VIO0_D13, NULL);
1286 gpio_request(GPIO_FN_VIO0_D12, NULL);
1287 gpio_request(GPIO_FN_VIO0_D11, NULL);
1288 gpio_request(GPIO_FN_VIO0_D10, NULL);
1289 gpio_request(GPIO_FN_VIO0_D9, NULL);
1290 gpio_request(GPIO_FN_VIO0_D8, NULL);
1291 gpio_request(GPIO_FN_VIO0_D7, NULL);
1292 gpio_request(GPIO_FN_VIO0_D6, NULL);
1293 gpio_request(GPIO_FN_VIO0_D5, NULL);
1294 gpio_request(GPIO_FN_VIO0_D4, NULL);
1295 gpio_request(GPIO_FN_VIO0_D3, NULL);
1296 gpio_request(GPIO_FN_VIO0_D2, NULL);
1297 gpio_request(GPIO_FN_VIO0_D1, NULL);
1298 gpio_request(GPIO_FN_VIO0_D0, NULL);
1299 gpio_request(GPIO_FN_VIO0_VD, NULL);
1300 gpio_request(GPIO_FN_VIO0_CLK, NULL);
1301 gpio_request(GPIO_FN_VIO0_FLD, NULL);
1302 gpio_request(GPIO_FN_VIO0_HD, NULL);
1303 platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
1306 gpio_request(GPIO_FN_VIO1_D7, NULL);
1307 gpio_request(GPIO_FN_VIO1_D6, NULL);
1308 gpio_request(GPIO_FN_VIO1_D5, NULL);
1309 gpio_request(GPIO_FN_VIO1_D4, NULL);
1310 gpio_request(GPIO_FN_VIO1_D3, NULL);
1311 gpio_request(GPIO_FN_VIO1_D2, NULL);
1312 gpio_request(GPIO_FN_VIO1_D1, NULL);
1313 gpio_request(GPIO_FN_VIO1_D0, NULL);
1314 gpio_request(GPIO_FN_VIO1_FLD, NULL);
1315 gpio_request(GPIO_FN_VIO1_HD, NULL);
1316 gpio_request(GPIO_FN_VIO1_VD, NULL);
1317 gpio_request(GPIO_FN_VIO1_CLK, NULL);
1318 platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
1321 gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1322 gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1323 gpio_request(GPIO_FN_KEYOUT3, NULL);
1324 gpio_request(GPIO_FN_KEYOUT2, NULL);
1325 gpio_request(GPIO_FN_KEYOUT1, NULL);
1326 gpio_request(GPIO_FN_KEYOUT0, NULL);
1327 gpio_request(GPIO_FN_KEYIN0, NULL);
1329 /* enable user debug switch */
1330 gpio_request(GPIO_PTR0, NULL);
1331 gpio_request(GPIO_PTR4, NULL);
1332 gpio_request(GPIO_PTR5, NULL);
1333 gpio_request(GPIO_PTR6, NULL);
1334 gpio_direction_input(GPIO_PTR0);
1335 gpio_direction_input(GPIO_PTR4);
1336 gpio_direction_input(GPIO_PTR5);
1337 gpio_direction_input(GPIO_PTR6);
1339 /* SD-card slot CN11 */
1340 /* Card-detect, used on CN11, either with SDHI0 or with SPI */
1341 gpio_request(GPIO_PTY7, NULL);
1342 gpio_direction_input(GPIO_PTY7);
1344 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1345 /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1346 gpio_request(GPIO_FN_SDHI0WP, NULL);
1347 gpio_request(GPIO_FN_SDHI0CMD, NULL);
1348 gpio_request(GPIO_FN_SDHI0CLK, NULL);
1349 gpio_request(GPIO_FN_SDHI0D3, NULL);
1350 gpio_request(GPIO_FN_SDHI0D2, NULL);
1351 gpio_request(GPIO_FN_SDHI0D1, NULL);
1352 gpio_request(GPIO_FN_SDHI0D0, NULL);
1354 /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1355 gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1356 gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1357 gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1358 gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1359 gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1360 gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1361 gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1362 gpio_request(GPIO_PTY6, NULL); /* write protect */
1363 gpio_direction_input(GPIO_PTY6);
1365 spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1368 /* MMC/SD-card slot CN12 */
1369 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
1370 /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1371 gpio_request(GPIO_FN_MMC_D7, NULL);
1372 gpio_request(GPIO_FN_MMC_D6, NULL);
1373 gpio_request(GPIO_FN_MMC_D5, NULL);
1374 gpio_request(GPIO_FN_MMC_D4, NULL);
1375 gpio_request(GPIO_FN_MMC_D3, NULL);
1376 gpio_request(GPIO_FN_MMC_D2, NULL);
1377 gpio_request(GPIO_FN_MMC_D1, NULL);
1378 gpio_request(GPIO_FN_MMC_D0, NULL);
1379 gpio_request(GPIO_FN_MMC_CLK, NULL);
1380 gpio_request(GPIO_FN_MMC_CMD, NULL);
1382 cn12_enabled = true;
1383 #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1384 /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1385 gpio_request(GPIO_FN_SDHI1WP, NULL);
1386 gpio_request(GPIO_FN_SDHI1CMD, NULL);
1387 gpio_request(GPIO_FN_SDHI1CLK, NULL);
1388 gpio_request(GPIO_FN_SDHI1D3, NULL);
1389 gpio_request(GPIO_FN_SDHI1D2, NULL);
1390 gpio_request(GPIO_FN_SDHI1D1, NULL);
1391 gpio_request(GPIO_FN_SDHI1D0, NULL);
1393 /* Card-detect, used on CN12 with SDHI1 */
1394 gpio_request(GPIO_PTW7, NULL);
1395 gpio_direction_input(GPIO_PTW7);
1397 cn12_enabled = true;
1401 /* I/O buffer drive ability is high for CN12 */
1402 __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
1406 gpio_request(GPIO_PTU2, NULL);
1407 gpio_direction_output(GPIO_PTU2, 1);
1410 gpio_request(GPIO_PTA3, NULL);
1411 gpio_request(GPIO_PTA4, NULL);
1412 gpio_direction_output(GPIO_PTA3, 0);
1413 gpio_direction_output(GPIO_PTA4, 0);
1416 gpio_request(GPIO_FN_FSIMCKB, NULL);
1417 gpio_request(GPIO_FN_FSIIBSD, NULL);
1418 gpio_request(GPIO_FN_FSIOBSD, NULL);
1419 gpio_request(GPIO_FN_FSIIBBCK, NULL);
1420 gpio_request(GPIO_FN_FSIIBLRCK, NULL);
1421 gpio_request(GPIO_FN_FSIOBBCK, NULL);
1422 gpio_request(GPIO_FN_FSIOBLRCK, NULL);
1423 gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1425 /* set SPU2 clock to 83.4 MHz */
1426 clk = clk_get(NULL, "spu_clk");
1428 clk_set_rate(clk, clk_round_rate(clk, 83333333));
1432 /* change parent of FSI B */
1433 clk = clk_get(NULL, "fsib_clk");
1435 /* 48kHz dummy clock was used to make sure 1/1 divide */
1436 clk_set_rate(&sh7724_fsimckb_clk, 48000);
1437 clk_set_parent(clk, &sh7724_fsimckb_clk);
1438 clk_set_rate(clk, 48000);
1442 gpio_request(GPIO_PTU0, NULL);
1443 gpio_direction_output(GPIO_PTU0, 0);
1446 /* enable motion sensor */
1447 gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1448 gpio_direction_input(GPIO_FN_INTC_IRQ1);
1450 /* set VPU clock to 166 MHz */
1451 clk = clk_get(NULL, "vpu_clk");
1453 clk_set_rate(clk, clk_round_rate(clk, 166000000));
1458 gpio_request(GPIO_FN_IRDA_OUT, NULL);
1459 gpio_request(GPIO_FN_IRDA_IN, NULL);
1460 gpio_request(GPIO_PTU5, NULL);
1461 gpio_direction_output(GPIO_PTU5, 0);
1463 /* enable I2C device */
1464 i2c_register_board_info(0, i2c0_devices,
1465 ARRAY_SIZE(i2c0_devices));
1467 i2c_register_board_info(1, i2c1_devices,
1468 ARRAY_SIZE(i2c1_devices));
1470 #if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
1472 gpio_request(GPIO_FN_DV_D15, NULL);
1473 gpio_request(GPIO_FN_DV_D14, NULL);
1474 gpio_request(GPIO_FN_DV_D13, NULL);
1475 gpio_request(GPIO_FN_DV_D12, NULL);
1476 gpio_request(GPIO_FN_DV_D11, NULL);
1477 gpio_request(GPIO_FN_DV_D10, NULL);
1478 gpio_request(GPIO_FN_DV_D9, NULL);
1479 gpio_request(GPIO_FN_DV_D8, NULL);
1480 gpio_request(GPIO_FN_DV_CLKI, NULL);
1481 gpio_request(GPIO_FN_DV_CLK, NULL);
1482 gpio_request(GPIO_FN_DV_VSYNC, NULL);
1483 gpio_request(GPIO_FN_DV_HSYNC, NULL);
1485 /* AK8813 power / reset sequence */
1486 gpio_request(GPIO_PTG4, NULL);
1487 gpio_request(GPIO_PTU3, NULL);
1489 gpio_direction_output(GPIO_PTG4, 0);
1491 gpio_direction_output(GPIO_PTU3, 1);
1495 /* Power up, reset */
1496 gpio_set_value(GPIO_PTU3, 0);
1501 gpio_set_value(GPIO_PTG4, 1);
1504 return platform_add_devices(ecovec_devices,
1505 ARRAY_SIZE(ecovec_devices));
1507 arch_initcall(arch_setup);
1509 static int __init devices_setup(void)
1511 sh_eth_init(&sh_eth_plat);
1514 device_initcall(devices_setup);
1516 static struct sh_machine_vector mv_ecovec __initmv = {
1517 .mv_name = "R0P7724 (EcoVec)",