3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/gpio/sandbox-gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/pinctrl/sandbox-pinmux.h>
7 #include <dt-bindings/mux/mux.h>
11 compatible = "sandbox";
17 eth0 = "/eth@10002000";
31 remoteproc0 = &rproc_1;
32 remoteproc1 = &rproc_2;
37 testbus3 = "/some-bus";
38 testfdt0 = "/some-bus/c-test@0";
39 testfdt12 = "/some-bus/c-test@1";
41 testfdt5 = "/some-bus/c-test@5";
43 testfdtm1 = &testfdtm1;
44 fdt-dummy0 = "/translation-test@8000/dev@0,0";
45 fdt-dummy1 = "/translation-test@8000/dev@1,100";
46 fdt-dummy2 = "/translation-test@8000/dev@2,200";
47 fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
48 fdt-dummy4 = "/translation-test@8000/xlatebus@4,400/devs/dev@19";
57 compatible = "sandbox,audio-codec";
58 #sound-dai-cells = <1>;
62 compatible = "gpio-keys";
65 gpios = <&gpio_a 3 0>;
70 gpios = <&gpio_a 4 0>;
76 compatible = "adc-keys";
77 io-channels = <&adc 3>;
78 keyup-threshold-microvolt = <3000000>;
82 linux,code = <KEY_F3>;
83 press-threshold-microvolt = <1500000>;
88 linux,code = <KEY_F4>;
89 press-threshold-microvolt = <1000000>;
94 linux,code = <KEY_F5>;
95 press-threshold-microvolt = <500000>;
101 compatible = "google,cros-ec-sandbox";
104 * This describes the flash memory within the EC. Note
105 * that the STM32L flash erases to 0, not 0xff.
108 image-pos = <0x08000000>;
112 /* Information for sandbox */
118 image-pos = <0xf000>;
122 uncomp-size = <0xcf8>;
125 value = [00 01 02 03 04 05 06 07
126 08 09 0a 0b 0c 0d 0e 0f
127 10 11 12 13 14 15 16 17
128 18 19 1a 1b 1c 1d 1e 1f];
132 image-pos = <0x10000>;
139 compatible = "sandbox,dsi-host";
144 compatible = "denx,u-boot-fdt-test";
148 test-gpios = <&gpio_a 1>, <&gpio_a 4>,
149 <&gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>,
151 test2-gpios = <&gpio_a 1>, <&gpio_a 4>,
152 <&gpio_b 6 GPIO_ACTIVE_LOW 3 2 1>,
153 <&gpio_b 7 GPIO_IN 3 2 1>,
154 <&gpio_b 8 GPIO_OUT 3 2 1>,
155 <&gpio_b 9 (GPIO_OUT|GPIO_OUT_ACTIVE) 3 2 1>;
157 <&gpio_c 0 (GPIO_OUT|GPIO_OPEN_DRAIN)>,
158 <&gpio_c 1 (GPIO_OUT|GPIO_OPEN_SOURCE)>,
159 <&gpio_c 2 GPIO_OUT>,
160 <&gpio_c 3 (GPIO_IN|GPIO_PULL_UP)>,
161 <&gpio_c 4 (GPIO_IN|GPIO_PULL_DOWN)>,
163 <&gpio_c 6 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_DRAIN)>,
164 <&gpio_c 7 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_SOURCE)>;
165 test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
166 test5-gpios = <&gpio_a 19>;
169 uint-value = <(-1234)>;
170 int64-value = /bits/ 64 <0x1111222233334444>;
171 int-array = <5678 9123 4567>;
172 str-value = "test string";
173 interrupts-extended = <&irq 3 0>;
175 phandle-value = <&gpio_c 10>, <0xFFFFFFFF 20>, <&gpio_a 30>;
177 mux-controls = <&muxcontroller0 0>, <&muxcontroller0 1>,
178 <&muxcontroller0 2>, <&muxcontroller0 3>,
180 mux-control-names = "mux0", "mux1", "mux2", "mux3", "mux4";
181 mux-syscon = <&syscon3>;
184 clock-frequency = <6500000>;
196 pixelclk-active = <1>;
202 clock-frequency = <9000000>;
214 pixelclk-active = <0>;
217 clock-frequency = <33500000>;
221 hfront-porch = <164>;
232 compatible = "not,compatible";
239 backlight: backlight {
240 compatible = "pwm-backlight";
241 enable-gpios = <&gpio_a 1>;
242 power-supply = <&ldo_1>;
243 pwms = <&pwm 0 1000>;
244 default-brightness-level = <5>;
245 brightness-levels = <0 16 32 64 128 170 202 234 255>;
249 compatible = "simple-bus";
251 compatible = "sandbox,phy";
256 compatible = "simple-bus";
262 compatible = "denx,u-boot-fdt-test";
266 mux-controls = <&muxcontroller0 0>;
267 mux-control-names = "mux0";
270 phy_provider0: gen_phy@0 {
271 compatible = "sandbox,phy";
275 phy_provider1: gen_phy@1 {
276 compatible = "sandbox,phy";
281 phy_provider2: gen_phy@2 {
282 compatible = "sandbox,phy";
286 gen_phy_user: gen_phy_user {
287 compatible = "simple-bus";
288 phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>;
289 phy-names = "phy1", "phy2", "phy3";
292 gen_phy_user1: gen_phy_user1 {
293 compatible = "simple-bus";
294 phys = <&phy_provider0 0>, <&phy_provider2>;
295 phy-names = "phy1", "phy2";
299 #address-cells = <1>;
301 compatible = "denx,u-boot-test-bus";
306 compatible = "denx,u-boot-fdt-test";
312 compatible = "denx,u-boot-fdt-test";
318 compatible = "denx,u-boot-fdt-test";
329 compatible = "google,another-fdt-test";
336 compatible = "google,another-fdt-test";
340 compatible = "denx,u-boot-fdt-test";
344 compatible = "denx,u-boot-fdt-test";
348 compatible = "denx,u-boot-fdt-test1";
352 compatible = "mediatek,u-boot-fdt-test";
353 #address-cells = <1>;
370 compatible = "denx,u-boot-devres-test";
375 compatible = "denx,u-boot-fdt-test";
376 test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
377 test5-gpios = <&gpio_a 19>;
381 #address-cells = <1>;
383 compatible = "denx,u-boot-test-bus";
384 dma-ranges = <0x10000000 0x00000000 0x00040000>;
387 compatible = "denx,u-boot-fdt-test";
392 #address-cells = <1>;
394 compatible = "denx,u-boot-test-bus";
397 compatible = "denx,u-boot-fdt-test";
401 acpi_test1: acpi-test {
402 compatible = "denx,u-boot-acpi-test";
403 acpi-ssdt-test-data = "ab";
404 acpi-dsdt-test-data = "hi";
406 compatible = "denx,u-boot-acpi-test";
410 acpi_test2: acpi-test2 {
411 compatible = "denx,u-boot-acpi-test";
412 acpi-ssdt-test-data = "cd";
413 acpi-dsdt-test-data = "jk";
417 clk_fixed: clk-fixed {
418 compatible = "fixed-clock";
420 clock-frequency = <1234>;
423 clk_fixed_factor: clk-fixed-factor {
424 compatible = "fixed-factor-clock";
428 clocks = <&clk_fixed>;
432 compatible = "fixed-clock";
434 clock-frequency = <20000000>;
438 clk_sandbox: clk-sbox {
439 compatible = "sandbox,clk";
441 assigned-clocks = <&clk_sandbox 3>;
442 assigned-clock-rates = <321>;
446 compatible = "sandbox,clk-test";
447 clocks = <&clk_fixed>,
452 clock-names = "fixed", "i2c", "spi", "uart2", "uart1";
456 compatible = "sandbox,clk-ccf";
460 compatible = "sandbox,eth";
461 reg = <0x10002000 0x1000>;
462 fake-host-hwaddr = [00 00 66 44 22 00];
465 eth_5: eth@10003000 {
466 compatible = "sandbox,eth";
467 reg = <0x10003000 0x1000>;
468 fake-host-hwaddr = [00 00 66 44 22 11];
472 compatible = "sandbox,eth";
473 reg = <0x10005000 0x1000>;
474 fake-host-hwaddr = [00 00 66 44 22 33];
478 compatible = "sandbox,eth";
479 reg = <0x10004000 0x1000>;
480 fake-host-hwaddr = [00 00 66 44 22 22];
483 dsa_eth0: dsa-test-eth {
484 compatible = "sandbox,eth";
485 reg = <0x10006000 0x1000>;
486 fake-host-hwaddr = [00 00 66 44 22 66];
490 compatible = "sandbox,dsa";
493 #address-cells = <1>;
498 phy-mode = "rgmii-rxid";
509 phy-mode = "rgmii-txid";
519 ethernet = <&dsa_eth0>;
530 sandbox_firmware: sandbox-firmware {
531 compatible = "sandbox,firmware";
534 sandbox-scmi-agent@0 {
535 compatible = "sandbox,scmi-agent";
536 #address-cells = <1>;
539 clk_scmi0: protocol@14 {
544 reset_scmi0: protocol@16 {
553 #address-cells = <1>;
556 regul0_scmi0: reg@0 {
558 regulator-name = "sandbox-voltd0";
559 regulator-min-microvolt = <1100000>;
560 regulator-max-microvolt = <3300000>;
562 regul1_scmi0: reg@1 {
564 regulator-name = "sandbox-voltd1";
565 regulator-min-microvolt = <1800000>;
571 sandbox-scmi-agent@1 {
572 compatible = "sandbox,scmi-agent";
573 #address-cells = <1>;
576 clk_scmi1: protocol@14 {
588 compatible = "sandbox,pinctrl-gpio";
591 compatible = "sandbox,gpio";
594 gpio-bank-name = "a";
595 sandbox,gpio-count = <20>;
596 hog_input_active_low {
599 gpios = <10 GPIO_ACTIVE_LOW>;
601 hog_input_active_high {
604 gpios = <11 GPIO_ACTIVE_HIGH>;
609 gpios = <12 GPIO_ACTIVE_HIGH>;
614 gpios = <13 GPIO_ACTIVE_HIGH>;
618 gpio_b: extra-gpios {
619 compatible = "sandbox,gpio";
622 gpio-bank-name = "b";
623 sandbox,gpio-count = <10>;
626 gpio_c: pinmux-gpios {
627 compatible = "sandbox,gpio";
630 gpio-bank-name = "c";
631 sandbox,gpio-count = <10>;
636 #address-cells = <1>;
639 compatible = "sandbox,i2c";
640 clock-frequency = <100000>;
643 compatible = "i2c-eeprom";
644 sandbox,emul = <&emul_eeprom>;
646 compatible = "fixed-partitions";
647 #address-cells = <1>;
649 bootcount_i2c: bootcount@10 {
657 compatible = "sandbox-rtc";
658 sandbox,emul = <&emul0>;
663 compatible = "sandbox-rtc";
664 sandbox,emul = <&emul1>;
669 compatible = "sandbox,i2c-emul-parent";
670 emul_eeprom: emul-eeprom {
671 compatible = "sandbox,i2c-eeprom";
672 sandbox,filename = "i2c.bin";
673 sandbox,size = <256>;
676 compatible = "sandbox,i2c-rtc-emul";
679 compatible = "sandbox,i2c-rtc-emul";
683 sandbox_pmic: sandbox_pmic {
685 sandbox,emul = <&emul_pmic0>;
690 sandbox,emul = <&emul_pmic1>;
695 compatible = "u-boot,bootcount-rtc";
701 compatible = "u-boot,bootcount-i2c-eeprom";
702 i2c-eeprom = <&bootcount_i2c>;
706 compatible = "sandbox,adc";
707 #io-channel-cells = <1>;
708 vdd-supply = <&buck2>;
709 vss-microvolts = <0>;
713 compatible = "sandbox,irq";
714 interrupt-controller;
715 #interrupt-cells = <2>;
720 compatible = "sandbox,lcd-sdl";
726 compatible = "gpio-leds";
729 gpios = <&gpio_a 1 0>;
730 label = "sandbox:red";
734 gpios = <&gpio_a 2 0>;
735 label = "sandbox:green";
739 gpios = <&gpio_a 5 0>;
740 label = "sandbox:default_on";
741 default-state = "on";
745 gpios = <&gpio_a 6 0>;
746 /* label intentionally omitted */
747 default-state = "off";
752 compatible = "sandbox,mbox";
757 compatible = "sandbox,mbox-test";
758 mboxes = <&mbox 100>, <&mbox 1>;
759 mbox-names = "other", "test";
763 timebase-frequency = <2000000>;
765 timebase-frequency = <3000000>;
766 compatible = "sandbox,cpu_sandbox";
771 compatible = "sandbox,cpu_sandbox";
776 compatible = "sandbox,cpu_sandbox";
782 compatible = "sandbox,soc";
786 compatible = "sandbox,i2s";
787 #sound-dai-cells = <1>;
788 sandbox,silent; /* Don't emit sounds while testing */
792 compatible = "sandbox,nop_sandbox1";
794 compatible = "sandbox,nop_sandbox2";
798 compatible = "sandbox,nop_sandbox2";
804 compatible = "sandbox,misc_sandbox";
808 compatible = "sandbox,mmc";
812 compatible = "sandbox,mmc";
816 compatible = "sandbox,mmc";
820 compatible = "sandbox,pch";
824 compatible = "sandbox,pci";
826 bus-range = <0x00 0xff>;
827 #address-cells = <3>;
829 ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000000
830 0x01000000 0 0x20000000 0x20000000 0 0x2000>;
832 compatible = "pci-generic";
833 reg = <0x0000 0 0 0 0>;
834 sandbox,emul = <&swap_case_emul0_0>;
837 compatible = "pci-generic";
838 /* reg 0 is at 0x14, using FDT_PCI_SPACE_MEM32 */
839 reg = <0x02000814 0 0 0 0
841 sandbox,emul = <&swap_case_emul0_1>;
844 compatible = "sandbox,p2sb";
845 reg = <0x02001010 0 0 0 0>;
846 sandbox,emul = <&p2sb_emul>;
849 intel,p2sb-port-id = <3>;
850 compatible = "sandbox,adder";
854 compatible = "sandbox,pmc";
855 reg = <0xf000 0 0 0 0>;
856 sandbox,emul = <&pmc_emul1e>;
858 gpe0-dwx-mask = <0xf>;
859 gpe0-dwx-shift-base = <4>;
865 compatible = "pci-generic";
866 /* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */
867 reg = <0x0100f810 0 0 0 0>;
868 sandbox,emul = <&swap_case_emul0_1f>;
873 compatible = "sandbox,pci-emul-parent";
874 swap_case_emul0_0: emul0@0,0 {
875 compatible = "sandbox,swap-case";
877 swap_case_emul0_1: emul0@1,0 {
878 compatible = "sandbox,swap-case";
881 swap_case_emul0_1f: emul0@1f,0 {
882 compatible = "sandbox,swap-case";
884 p2sb_emul: emul@2,0 {
885 compatible = "sandbox,p2sb-emul";
887 pmc_emul1e: emul@1e,0 {
888 compatible = "sandbox,pmc-emul";
893 compatible = "sandbox,pci";
895 bus-range = <0x00 0xff>;
896 #address-cells = <3>;
898 ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000 // MEM0
899 0x02000000 0 0x31000000 0x31000000 0 0x2000 // MEM1
900 0x01000000 0 0x40000000 0x40000000 0 0x2000>;
901 sandbox,dev-info = <0x08 0x00 0x1234 0x5678
902 0x0c 0x00 0x1234 0x5678
903 0x10 0x00 0x1234 0x5678>;
905 reg = <0x8000 0 0 0 0>;
910 compatible = "sandbox,pci";
912 bus-range = <0x00 0xff>;
913 #address-cells = <3>;
915 ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000
916 0x01000000 0 0x60000000 0x60000000 0 0x2000>;
917 sandbox,dev-info = <0x08 0x00 0x1234 0x5678>;
919 compatible = "pci-generic";
920 reg = <0xf800 0 0 0 0>;
921 sandbox,emul = <&swap_case_emul2_1f>;
926 compatible = "sandbox,pci-emul-parent";
927 swap_case_emul2_1f: emul2@1f,0 {
928 compatible = "sandbox,swap-case";
933 compatible = "sandbox,pci_ep";
937 compatible = "simple-bus";
939 compatible = "denx,u-boot-probe-test";
943 compatible = "denx,u-boot-probe-test";
947 compatible = "denx,u-boot-probe-test";
951 compatible = "denx,u-boot-probe-test";
952 first-syscon = <&syscon0>;
953 second-sys-ctrl = <&another_system_controller>;
954 third-syscon = <&syscon2>;
958 pwrdom: power-domain {
959 compatible = "sandbox,power-domain";
960 #power-domain-cells = <1>;
964 compatible = "sandbox,power-domain-test";
965 power-domains = <&pwrdom 2>;
969 compatible = "sandbox,pwm";
974 compatible = "sandbox,pwm";
979 compatible = "sandbox,ram";
983 compatible = "sandbox,warm-reset";
987 compatible = "sandbox,reset";
991 compatible = "sandbox,reset-ctl";
996 compatible = "sandbox,reset-ctl-test";
997 resets = <&resetc 100>, <&resetc 2>;
998 reset-names = "other", "test";
1002 compatible = "sandbox,sandbox-rng";
1006 compatible = "sandbox,test-processor";
1007 remoteproc-name = "remoteproc-test-dev1";
1011 compatible = "sandbox,test-processor";
1012 internal-memory-mapped;
1013 remoteproc-name = "remoteproc-test-dev2";
1017 compatible = "simple-panel";
1018 backlight = <&backlight 0 100>;
1022 compatible = "sandbox,smem";
1026 compatible = "sandbox,sound";
1028 sound-dai = <&i2s 0>;
1032 sound-dai = <&audio 0>;
1037 #address-cells = <1>;
1040 compatible = "sandbox,spi";
1041 cs-gpios = <0>, <0>, <&gpio_a 0>;
1044 compatible = "spansion,m25p16", "jedec,spi-nor";
1045 spi-max-frequency = <40000000>;
1046 sandbox,filename = "spi.bin";
1050 compatible = "spansion,m25p16", "jedec,spi-nor";
1051 spi-max-frequency = <50000000>;
1052 sandbox,filename = "spi.bin";
1059 compatible = "sandbox,syscon0";
1063 another_system_controller: syscon@1 {
1064 compatible = "sandbox,syscon1";
1072 compatible = "simple-mfd", "syscon";
1080 compatible = "simple-mfd", "syscon";
1081 reg = <0x000100 0x10>;
1083 muxcontroller0: a-mux-controller {
1084 compatible = "mmio-mux";
1085 #mux-control-cells = <1>;
1087 mux-reg-masks = <0x0 0x30>, /* 0: reg 0x0, bits 5:4 */
1088 <0xc 0x1E>, /* 1: reg 0xc, bits 4:1 */
1089 <0x4 0xFF>; /* 2: reg 0x4, bits 7:0 */
1090 idle-states = <MUX_IDLE_AS_IS>, <0x02>, <0x73>;
1091 u-boot,mux-autoprobe;
1095 muxcontroller1: emul-mux-controller {
1096 compatible = "mux-emul";
1097 #mux-control-cells = <0>;
1098 u-boot,mux-autoprobe;
1099 idle-state = <0xabcd>;
1103 compatible = "denx,u-boot-fdtm-test";
1106 testfdtm1: testfdtm1 {
1107 compatible = "denx,u-boot-fdtm-test";
1111 compatible = "denx,u-boot-fdtm-test";
1115 compatible = "sandbox,timer";
1116 clock-frequency = <1000000>;
1120 compatible = "sandbox,timer";
1121 sandbox,timebase-frequency-fallback;
1125 compatible = "sandbox,tpm2";
1129 compatible = "sandbox,serial";
1130 u-boot,dm-pre-reloc;
1134 compatible = "sandbox,usb";
1135 status = "disabled";
1137 compatible = "sandbox,usb-hub";
1138 #address-cells = <1>;
1142 compatible = "sandbox,usb-flash";
1148 compatible = "sandbox,usb";
1150 compatible = "usb-hub";
1151 usb,device-class = <9>;
1152 #address-cells = <1>;
1155 compatible = "sandbox,usb-hub";
1156 #address-cells = <1>;
1160 compatible = "sandbox,usb-flash";
1161 sandbox,filepath = "testflash.bin";
1166 compatible = "sandbox,usb-flash";
1167 sandbox,filepath = "testflash1.bin";
1172 compatible = "sandbox,usb-flash";
1173 sandbox,filepath = "testflash2.bin";
1178 compatible = "sandbox,usb-keyb";
1193 compatible = "sandbox,usb";
1194 status = "disabled";
1198 compatible = "sandbox,spmi";
1199 #address-cells = <0x1>;
1200 #size-cells = <0x1>;
1203 compatible = "qcom,spmi-pmic";
1205 #address-cells = <0x1>;
1206 #size-cells = <0x1>;
1209 spmi_gpios: gpios@c000 {
1210 compatible = "qcom,pm8916-gpio";
1211 reg = <0xc000 0x400>;
1215 gpio-bank-name="spmi";
1221 compatible = "sandbox,wdt";
1225 compatible = "sandbox,axi";
1226 #address-cells = <0x1>;
1227 #size-cells = <0x1>;
1229 compatible = "sandbox,sandbox_store";
1235 #address-cells = <1>;
1237 setting = "sunrise ohoka";
1238 other-node = "/some-bus/c-test@5";
1239 int-values = <0x1937 72993>;
1240 u-boot,acpi-ssdt-order = <&acpi_test2 &acpi_test1>;
1242 compatible = "denx,u-boot-fdt-test";
1247 translation-test@8000 {
1248 compatible = "simple-bus";
1249 reg = <0x8000 0x4000>;
1251 #address-cells = <0x2>;
1252 #size-cells = <0x1>;
1254 ranges = <0 0x0 0x8000 0x1000
1255 1 0x100 0x9000 0x1000
1256 2 0x200 0xA000 0x1000
1257 3 0x300 0xB000 0x1000
1258 4 0x400 0xC000 0x1000
1261 dma-ranges = <0 0x000 0x10000000 0x1000
1262 1 0x100 0x20000000 0x1000
1266 compatible = "denx,u-boot-fdt-dummy";
1267 reg = <0 0x0 0x1000>;
1268 reg-names = "sandbox-dummy-0";
1272 compatible = "denx,u-boot-fdt-dummy";
1273 reg = <1 0x100 0x1000>;
1278 compatible = "denx,u-boot-fdt-dummy";
1279 reg = <2 0x200 0x1000>;
1284 compatible = "simple-bus";
1285 reg = <3 0x300 0x1000>;
1287 #address-cells = <0x1>;
1288 #size-cells = <0x0>;
1291 compatible = "denx,u-boot-fdt-dummy";
1297 compatible = "sandbox,zero-size-cells-bus";
1298 reg = <4 0x400 0x1000>;
1299 #address-cells = <1>;
1301 ranges = <0 4 0x400 0x1000>;
1304 #address-cells = <1>;
1308 compatible = "denx,u-boot-fdt-dummy";
1317 compatible = "sandbox,sandbox_osd";
1321 compatible = "sandbox,tee";
1325 compatible = "sandbox,virtio1";
1329 compatible = "sandbox,virtio2";
1333 compatible = "sandbox,scmi-devices";
1334 clocks = <&clk_scmi0 7>, <&clk_scmi0 3>, <&clk_scmi1 1>;
1335 resets = <&reset_scmi0 3>;
1336 regul0-supply = <®ul0_scmi0>;
1337 regul1-supply = <®ul1_scmi0>;
1341 compatible = "sandbox,pinctrl";
1343 pinctrl-names = "default", "alternate";
1344 pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_i2s>;
1345 pinctrl-1 = <&pinctrl_spi>, <&pinctrl_i2c>;
1347 pinctrl_gpios: gpios {
1361 pinmux = <SANDBOX_PINMUX(7, SANDBOX_PINMUX_GPIO)>;
1366 pinmux = <SANDBOX_PINMUX(8, SANDBOX_PINMUX_GPIO)>;
1373 groups = "I2C_UART";
1393 pinmux = <SANDBOX_PINMUX(5, SANDBOX_PINMUX_CS)>,
1394 <SANDBOX_PINMUX(6, SANDBOX_PINMUX_CS)>;
1400 compatible = "sandbox,hwspinlock";
1404 compatible = "sandbox,dma";
1407 dmas = <&dma 0>, <&dma 1>, <&dma 2>;
1408 dma-names = "m2m", "tx0", "rx0";
1412 * keep mdio-mux ahead of mdio so that the mux is removed first at the
1413 * end of the test. If parent mdio is removed first, clean-up of the
1414 * mux will trigger a 2nd probe of parent-mdio, leaving parent-mdio
1415 * active at the end of the test. That it turn doesn't allow the mdio
1416 * class to be destroyed, triggering an error.
1419 compatible = "sandbox,mdio-mux";
1420 #address-cells = <1>;
1422 mdio-parent-bus = <&mdio>;
1433 compatible = "sandbox,mdio";
1437 compatible = "simple-pm-bus";
1438 clocks = <&clk_sandbox 4>;
1439 power-domains = <&pwrdom 1>;
1442 resetc2: syscon-reset {
1443 compatible = "syscon-reset";
1445 regmap = <&syscon0>;
1447 mask = <0x27FFFFFF>;
1452 compatible = "sandbox,misc_sandbox";
1453 resets = <&resetc2 15>, <&resetc2 30>, <&resetc2 60>;
1454 reset-names = "valid", "no_mask", "out_of_range";
1458 compatible = "sandbox,sysinfo-sandbox";
1461 some_regmapped-bus {
1462 #address-cells = <0x1>;
1463 #size-cells = <0x1>;
1465 ranges = <0x0 0x0 0x10>;
1466 compatible = "simple-bus";
1470 compatible = "sandbox,regmap_test";
1475 #include "sandbox_pmic.dtsi"
1476 #include "cros-ec-keyboard.dtsi"