arch/riscv/boot/dts/starfive/jh7110-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2 /*
   3  * Copyright (C) 2022 StarFive Technology Co., Ltd.
   4  * Copyright (C) 2022 Hal Feng <hal.feng@starfivetech.com>
   5  */
   6
   7 /dts-v1/;
   8 #include "jh7110.dtsi"
   9 #include "jh7110-evb-pinctrl.dtsi"
  10 #include "codecs/sf_hdmi.dtsi"
  11
  12 / {
  13         aliases {
  14                 spi0 = &qspi;
  15                 gpio0 = &gpio;
  16                 ethernet0 = &gmac0;
  17                 ethernet1 = &gmac1;
  18                 mmc0 = &sdio0;
  19                 mmc1 = &sdio1;
  20                 serial0 = &uart0;
  21                 serial3 = &uart3;
  22                 i2c0 = &i2c0;
  23                 i2c1 = &i2c1;
  24                 i2c2 = &i2c2;
  25                 i2c3 = &i2c3;
  26                 i2c4 = &i2c4;
  27                 i2c5 = &i2c5;
  28                 i2c6 = &i2c6;
  29         };
  30
  31         chosen {
  32                 linux,initrd-start = <0x0 0x46100000>;
  33                 linux,initrd-end = <0x0 0x4c000000>;
  34                 stdout-path = "serial0:115200";
  35                 #bootargs = "debug console=ttyS0 rootwait";
  36         };
  37
  38         cpus {
  39                 timebase-frequency = <4000000>;
  40         };
  41
  42         memory@40000000 {
  43                 device_type = "memory";
  44                 reg = <0x0 0x40000000 0x1 0x0>;
  45         };
  46
  47         reserved-memory {
  48                 #address-cells = <2>;
  49                 #size-cells = <2>;
  50                 ranges;
  51
  52                 linux,cma {
  53                         compatible = "shared-dma-pool";
  54                         reusable;
  55                         size = <0x0 0x20000000>;
  56                         alignment = <0x0 0x1000>;
  57                         alloc-ranges = <0x0 0x80000000 0x0 0x20000000>;
  58                         linux,cma-default;
  59                 };
  60
  61                 e24_mem: e24@c0000000 {
  62                         no-map;
  63                         reg = <0x0 0xc0110000 0x0 0xf0000>;
  64                 };
  65
  66                 xrp_reserved: xrpbuffer@f0000000 {
  67                         reg = <0x0 0xf0000000 0x0 0x01ffffff
  68                                 0x0 0xf2000000 0x0 0x00001000
  69                                 0x0 0xf2001000 0x0 0x00fff000
  70                                 0x0 0xf3000000 0x0 0x00001000>;
  71                 };
  72
  73         };
  74 };
  75
  76 &uart0 {
  77         pinctrl-names = "default";
  78         pinctrl-0 = <&uart0_pins>;
  79         status = "okay";
  80 };
  81
  82 &uart1 {
  83        pinctrl-names = "default";
  84        pinctrl-0 = <&uart1_pins>;
  85        status = "disabled";
  86 };
  87
  88 &uart2 {
  89        pinctrl-names = "default";
  90        pinctrl-0 = <&uart2_pins>;
  91        status = "disabled";
  92 };
  93
  94 &uart3 {
  95        pinctrl-names = "default";
  96        pinctrl-0 = <&uart3_pins>;
  97        status = "disabled";
  98 };
  99
 100 &uart4 {
 101        pinctrl-names = "default";
 102        pinctrl-0 = <&uart4_pins>;
 103        status = "disabled";
 104 };
 105
 106 &uart5 {
 107        pinctrl-names = "default";
 108        pinctrl-0 = <&uart5_pins>;
 109        status = "disabled";
 110 };
 111
 112 &dma {
 113         status = "okay";
 114 };
 115
 116 &trng {
 117         status = "okay";
 118 };
 119
 120 &crypto {
 121         status = "okay";
 122 };
 123
 124 &sec_dma {
 125         status = "okay";
 126 };
 127
 128 &i2c0 {
 129         clock-frequency = <100000>;
 130         i2c-sda-hold-time-ns = <300>;
 131         i2c-sda-falling-time-ns = <510>;
 132         i2c-scl-falling-time-ns = <510>;
 133         auto_calc_scl_lhcnt;
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&i2c0_pins>;
 136         status = "disabled";
 137
 138         ac108_a: ac108@3b {
 139                 compatible = "x-power,ac108_0";
 140                 reg = <0x3b>;
 141                 #sound-dai-cells = <0>;
 142                 data-protocol = <0>;
 143         };
 144
 145         wm8960: codec@1a {
 146                 compatible = "wlf,wm8960";
 147                 reg = <0x1a>;
 148                 #sound-dai-cells = <0>;
 149
 150                 wlf,shared-lrclk;
 151         };
 152 };
 153
 154 &i2c1 {
 155         clock-frequency = <100000>;
 156         i2c-sda-hold-time-ns = <300>;
 157         i2c-sda-falling-time-ns = <510>;
 158         i2c-scl-falling-time-ns = <510>;
 159         auto_calc_scl_lhcnt;
 160         pinctrl-names = "default";
 161         pinctrl-0 = <&i2c1_pins>;
 162         status = "disabled";
 163 };
 164
 165 &i2c2 {
 166         clock-frequency = <100000>;
 167         i2c-sda-hold-time-ns = <300>;
 168         i2c-sda-falling-time-ns = <510>;
 169         i2c-scl-falling-time-ns = <510>;
 170         auto_calc_scl_lhcnt;
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&i2c2_pins>;
 173         status = "okay";
 174
 175         seeed_plane_i2c@45 {
 176                 compatible = "seeed_panel";
 177                 reg = <0x45>;
 178
 179                 port {
 180                         panel_dsi_port: endpoint {
 181                                 remote-endpoint = <&dsi_out_port>;
 182                         };
 183                 };
 184         };
 185
 186         tinker_ft5406: tinker_ft5406@38 {
 187                 compatible = "tinker_ft5406";
 188                 reg = <0x38>;
 189         };
 190 };
 191
 192 &i2c3 {
 193         clock-frequency = <100000>;
 194         i2c-sda-hold-time-ns = <300>;
 195         i2c-sda-falling-time-ns = <510>;
 196         i2c-scl-falling-time-ns = <510>;
 197         auto_calc_scl_lhcnt;
 198         pinctrl-names = "default";
 199         pinctrl-0 = <&i2c3_pins>;
 200         status = "disabled";
 201 };
 202
 203 &i2c4 {
 204         clock-frequency = <100000>;
 205         i2c-sda-hold-time-ns = <300>;
 206         i2c-sda-falling-time-ns = <510>;
 207         i2c-scl-falling-time-ns = <510>;
 208         auto_calc_scl_lhcnt;
 209         pinctrl-names = "default";
 210         pinctrl-0 = <&i2c4_pins>;
 211         status = "okay";
 212
 213         sc2235: sc2235@30 {
 214                 compatible = "smartsens,sc2235";
 215                 reg = <0x30>;
 216                 clocks = <&clk_ext_camera>;
 217                 clock-names = "xclk";
 218
 219                 port {
 220                         /* Parallel bus endpoint */
 221                         sc2235_to_parallel: endpoint {
 222                                 remote-endpoint = <&parallel_from_sc2235>;
 223                                 bus-type = <5>;      /* Parallel */
 224                                 bus-width = <8>;
 225                                 data-shift = <2>; /* lines 13:6 are used */
 226                                 hsync-active = <1>;
 227                                 vsync-active = <1>;
 228                                 pclk-sample = <1>;
 229                         };
 230                 };
 231         };
 232
 233         tda998x@70 {
 234                 compatible = "nxp,tda998x";
 235                 reg = <0x70>;
 236
 237                 port {
 238                         tda998x_0_input: endpoint {
 239                                 remote-endpoint = <&hdmi_out>;
 240                         };
 241                 };
 242         };
 243 };
 244
 245 &i2c5 {
 246         clock-frequency = <100000>;
 247         i2c-sda-hold-time-ns = <300>;
 248         i2c-sda-falling-time-ns = <510>;
 249         i2c-scl-falling-time-ns = <510>;
 250         auto_calc_scl_lhcnt;
 251         pinctrl-names = "default";
 252         pinctrl-0 = <&i2c5_pins>;
 253         status = "okay";
 254 };
 255
 256 &i2c6 {
 257         clock-frequency = <100000>;
 258         i2c-sda-hold-time-ns = <300>;
 259         i2c-sda-falling-time-ns = <510>;
 260         i2c-scl-falling-time-ns = <510>;
 261         auto_calc_scl_lhcnt;
 262         pinctrl-names = "default";
 263         pinctrl-0 = <&i2c6_pins>;
 264         status = "okay";
 265
 266         ov4689: ov4689@36 {
 267                 compatible = "ovti,ov4689";
 268                 reg = <0x36>;
 269                 clocks = <&clk_ext_camera>;
 270                 clock-names = "xclk";
 271                 //reset-gpio = <&gpio 18 0>;
 272                 rotation = <180>;
 273
 274                 port {
 275                         /* Parallel bus endpoint */
 276                         ov4689_to_csi2rx0: endpoint {
 277                                 remote-endpoint = <&csi2rx0_from_ov4689>;
 278                                 bus-type = <4>;         /* MIPI CSI-2 D-PHY */
 279                                 clock-lanes = <0>;
 280                                 data-lanes = <1 2 3 4>;
 281                         };
 282                 };
 283         };
 284
 285         imx219: imx219@10 {
 286                 compatible = "sony,imx219";
 287                 reg = <0x10>;
 288                 clocks = <&clk_ext_camera>;
 289                 clock-names = "xclk";
 290                 //reset-gpio = <&gpio 18 0>;
 291                 //DOVDD-supply = <&v2v8>;
 292                 rotation = <0>;
 293                 orientation = <1>; //CAMERA_ORIENTATION_BACK
 294
 295                 port {
 296                         /* CSI2 bus endpoint */
 297                         imx219_to_csi2rx0: endpoint {
 298                                 remote-endpoint = <&csi2rx0_from_imx219>;
 299                                 bus-type = <4>;      /* MIPI CSI-2 D-PHY */
 300                                 clock-lanes = <0>;
 301                                 data-lanes = <2 1>;
 302                                 lane-polarities = <1 1 1>;
 303                                 link-frequencies = /bits/ 64 <456000000>;
 304                         };
 305                 };
 306         };
 307 };
 308
 309 &sdio0 {
 310         status = "disabled";
 311 };
 312
 313 &sdio1 {
 314         status = "disabled";
 315 };
 316
 317 &vin_sysctl {
 318         status = "okay";
 319
 320         ports {
 321                 #address-cells = <1>;
 322                 #size-cells = <0>;
 323
 324                 port@0 {
 325                         reg = <0>;
 326                         #address-cells = <1>;
 327                         #size-cells = <0>;
 328
 329                         /* Parallel bus endpoint */
 330                         parallel_from_sc2235: endpoint@0 {
 331                                 reg = <0>;
 332                                 remote-endpoint = <&sc2235_to_parallel>;
 333                                 bus-type = <5>;         /* Parallel */
 334                                 bus-width = <8>;
 335                                 data-shift = <2>;       /* lines 9:2 are used */
 336                                 hsync-active = <1>;
 337                                 vsync-active = <0>;
 338                                 pclk-sample = <1>;
 339                                 status = "okay";
 340                         };
 341                 };
 342
 343                 port@1 {
 344                         reg = <1>;
 345                         #address-cells = <1>;
 346                         #size-cells = <0>;
 347
 348                         /* CSI2 bus endpoint */
 349                         csi2rx0_from_ov4689: endpoint@0 {
 350                                 reg = <0>;
 351                                 remote-endpoint = <&ov4689_to_csi2rx0>;
 352                                 bus-type = <4>;      /* MIPI CSI-2 D-PHY */
 353                                 clock-lanes = <0>;
 354                                 data-lanes = <1 2 3 4>;
 355                                 status = "okay";
 356                         };
 357
 358                         /* CSI2 bus endpoint */
 359                         csi2rx0_from_imx219: endpoint@1 {
 360                                 reg = <1>;
 361                                 remote-endpoint = <&imx219_to_csi2rx0>;
 362                                 bus-type = <4>;      /* MIPI CSI-2 D-PHY */
 363                                 clock-lanes = <0>;
 364                                 data-lanes = <2 1>;
 365                                 lane-polarities = <1 1 1>;
 366                                 status = "okay";
 367                         };
 368                 };
 369         };
 370 };
 371
 372 &sfctemp {
 373         status = "okay";
 374 };
 375
 376 &jpu {
 377         status = "okay";
 378 };
 379
 380 &vpu_dec {
 381         status = "okay";
 382 };
 383
 384 &vpu_enc {
 385         status = "okay";
 386 };
 387
 388 &gmac0 {
 389         status = "okay";
 390         #address-cells = <1>;
 391         #size-cells = <0>;
 392         phy0: ethernet-phy@0 {
 393                 rxc_dly_en = <1>;
 394                 tx_delay_sel_fe = <5>;
 395                 tx_delay_sel = <0xb>;
 396                 tx_inverted_10 = <0x0>;
 397                 tx_inverted_100 = <0x0>;
 398                 tx_inverted_1000 = <0x0>;
 399         };
 400 };
 401
 402 &gmac1 {
 403         #address-cells = <1>;
 404         #size-cells = <0>;
 405         status = "okay";
 406         phy1: ethernet-phy@1 {
 407                 rxc-skew-ps = <1060>;
 408                 txc-skew-ps = <1800>;
 409                 reg = <0>;
 410         };
 411 };
 412
 413 &gpu {
 414         status = "okay";
 415 };
 416
 417 &can0 {
 418         pinctrl-names = "default";
 419         pinctrl-0 = <&can0_pins>;
 420         status = "disabled";
 421 };
 422
 423 &can1 {
 424         pinctrl-names = "default";
 425         pinctrl-0 = <&can1_pins>;
 426         status = "disabled";
 427 };
 428
 429 &tdm {
 430         pinctrl-names = "default";
 431         pinctrl-0 = <&tdm0_pins>;
 432         status = "disabled";
 433 };
 434
 435 &spdif0 {
 436         pinctrl-names = "default";
 437         pinctrl-0 = <&spdif0_pins>;
 438         status = "disabled";
 439 };
 440
 441 &pwmdac {
 442         pinctrl-names = "default";
 443         pinctrl-0 = <&pwmdac0_pins>;
 444         status = "disabled";
 445 };
 446
 447 &i2stx {
 448         status = "disabled";
 449 };
 450
 451 &pdm {
 452         pinctrl-names = "default";
 453         pinctrl-0 = <&pdm0_pins>;
 454         status = "disabled";
 455 };
 456
 457 &i2srx_mst {
 458         pinctrl-names = "default";
 459         pinctrl-0 = <&i2srx_clk_pins>;
 460         status = "disabled";
 461 };
 462
 463 &i2srx_3ch {
 464         pinctrl-names = "default";
 465         pinctrl-0 = <&i2s_clk_pins &i2srx_pins>;
 466         status = "disabled";
 467 };
 468
 469 &i2stx_4ch0 {
 470         pinctrl-names = "default";
 471         pinctrl-0 = <&mclk_ext_pins>;
 472         status = "okay";
 473 };
 474
 475 &i2stx_4ch1 {
 476         pinctrl-names = "default";
 477         pinctrl-0 = <&i2stx_pins>;
 478         status = "disabled";
 479 };
 480
 481 &spdif_transmitter {
 482         status = "disabled";
 483 };
 484
 485 &pwmdac_codec {
 486         status = "okay";
 487 };
 488
 489 &dmic_codec {
 490         status = "okay";
 491 };
 492
 493 &spi0 {
 494         pinctrl-names = "default";
 495         pinctrl-0 = <&ssp0_pins>;
 496         status = "disabled";
 497
 498         spi_dev0: spi@0 {
 499                 compatible = "rohm,dh2228fv";
 500                 pl022,com-mode = <1>;
 501                 spi-max-frequency = <10000000>;
 502                 reg = <0>;
 503                 status = "okay";
 504         };
 505 };
 506
 507 &spi1 {
 508         pinctrl-names = "default";
 509         pinctrl-0 = <&ssp1_pins>;
 510         status = "disabled";
 511
 512         spi_dev1: spi@0 {
 513                 compatible = "rohm,dh2228fv";
 514                 pl022,com-mode = <1>;
 515                 spi-max-frequency = <10000000>;
 516                 reg = <0>;
 517                 status = "okay";
 518         };
 519 };
 520
 521 &spi2 {
 522         pinctrl-names = "default";
 523         pinctrl-0 = <&ssp2_pins>;
 524         status = "disabled";
 525
 526         spi_dev2: spi@0 {
 527                 compatible = "rohm,dh2228fv";
 528                 pl022,com-mode = <1>;
 529                 spi-max-frequency = <10000000>;
 530                 reg = <0>;
 531                 status = "okay";
 532         };
 533 };
 534
 535 &spi3 {
 536         pinctrl-names = "default";
 537         pinctrl-0 = <&ssp3_pins>;
 538         status = "disabled";
 539
 540         spi_dev3: spi@0 {
 541                 compatible = "rohm,dh2228fv";
 542                 pl022,com-mode = <1>;
 543                 spi-max-frequency = <10000000>;
 544                 reg = <0>;
 545                 status = "okay";
 546         };
 547 };
 548
 549 &spi4 {
 550         pinctrl-names = "default";
 551         pinctrl-0 = <&ssp4_pins>;
 552         status = "disabled";
 553
 554         spi_dev4: spi@0 {
 555                 compatible = "rohm,dh2228fv";
 556                 pl022,com-mode = <1>;
 557                 spi-max-frequency = <10000000>;
 558                 reg = <0>;
 559                 status = "okay";
 560         };
 561 };
 562
 563 &spi5 {
 564         pinctrl-names = "default";
 565         pinctrl-0 = <&ssp5_pins>;
 566         status = "disabled";
 567
 568         spi_dev5: spi@0 {
 569                 compatible = "rohm,dh2228fv";
 570                 pl022,com-mode = <1>;
 571                 spi-max-frequency = <10000000>;
 572                 reg = <0>;
 573                 status = "okay";
 574         };
 575 };
 576
 577 &spi6 {
 578         pinctrl-names = "default";
 579         pinctrl-0 = <&ssp6_pins>;
 580         status = "disabled";
 581
 582         spi_dev6: spi@0 {
 583                 compatible = "rohm,dh2228fv";
 584                 pl022,com-mode = <1>;
 585                 spi-max-frequency = <10000000>;
 586                 reg = <0>;
 587                 status = "okay";
 588         };
 589 };
 590
 591 &pcie0 {
 592         pinctrl-names = "perst-default", "perst-active", "power-default", "power-active";
 593         pinctrl-0 = <&pcie0_perst_default>;
 594         pinctrl-1 = <&pcie0_perst_active>;
 595         pinctrl-2 = <&pcie0_power_default>;
 596         pinctrl-3 = <&pcie0_power_active>;
 597         status = "disabled";
 598 };
 599
 600 &pcie1 {
 601         pinctrl-names = "perst-default", "perst-active", "power-default", "power-active";
 602         pinctrl-0 = <&pcie1_perst_default>;
 603         pinctrl-1 = <&pcie1_perst_active>;
 604         pinctrl-2 = <&pcie1_power_default>;
 605         pinctrl-3 = <&pcie1_power_active>;
 606         status = "disabled";
 607 };
 608
 609 &mailbox_contrl0 {
 610         status = "okay";
 611 };
 612
 613 &mailbox_client0 {
 614         status = "okay";
 615 };
 616
 617 &display {
 618         status = "okay";
 619 };
 620
 621 &hdmi {
 622         status = "okay";
 623         pinctrl-names = "default";
 624         pinctrl-0 = <&inno_hdmi_pins>;
 625
 626         hdmi_in: port {
 627                 #address-cells = <1>;
 628                 #size-cells = <0>;
 629                 hdmi_in_lcdc: endpoint@0 {
 630                         reg = <0>;
 631                         remote-endpoint = <&dc_out_dpi1>;
 632                 };
 633         };
 634 };
 635
 636 &dc8200 {
 637         status = "okay";
 638
 639         dc_out: port {
 640                 #address-cells = <1>;
 641                 #size-cells = <0>;
 642                 dc_out_dpi0: endpoint@0 {
 643                         reg = <0>;
 644                         remote-endpoint = <&hdmi_input0>;
 645                 };
 646                 dc_out_dpi1: endpoint@1 {
 647                         reg = <1>;
 648                         remote-endpoint = <&hdmi_in_lcdc>;
 649                 };
 650
 651                 dc_out_dpi2: endpoint@2 {
 652                         reg = <2>;
 653                         remote-endpoint = <&mipi_in>;
 654                 };
 655         };
 656 };
 657
 658 &rgb_output {
 659         status = "okay";
 660
 661         ports {
 662                 #address-cells = <1>;
 663                 #size-cells = <0>;
 664                 port@0 {
 665                         #address-cells = <1>;
 666                         #size-cells = <0>;
 667                         reg = <0>;
 668                         hdmi_input0:endpoint@0 {
 669                                 reg = <0>;
 670                                 remote-endpoint = <&dc_out_dpi0>;
 671                         };
 672                 };
 673                 port@1 {
 674                         reg = <1>;
 675                         hdmi_out:endpoint {
 676                                 remote-endpoint = <&tda998x_0_input>;
 677                         };
 678                 };
 679         };
 680 };
 681
 682 &tda988x_pin {
 683         pinctrl-names = "default";
 684         pinctrl-0 = <&rgb_pad_pins>;
 685         status = "disabled";
 686 };
 687
 688 &dsi_output {
 689         status = "okay";
 690
 691         ports {
 692                 #address-cells = <1>;
 693                 #size-cells = <0>;
 694
 695                 port@0 {
 696                         reg = <0>;
 697                         mipi_in: endpoint {
 698                                 remote-endpoint = <&dc_out_dpi2>;
 699                         };
 700                 };
 701
 702                 port@1 {
 703                         reg = <1>;
 704                         mipi_out: endpoint {
 705                                 remote-endpoint = <&dsi_in_port>;
 706                         };
 707                 };
 708         };
 709 };
 710
 711 &mipi_dsi {
 712         status = "okay";
 713
 714         port {
 715                 dsi_out_port: endpoint@0 {
 716                         remote-endpoint = <&panel_dsi_port>;
 717                 };
 718                 dsi_in_port: endpoint@1 {
 719                         remote-endpoint = <&mipi_out>;
 720                 };
 721         };
 722
 723         mipi_panel: panel@0 {
 724                 /*compatible = "";*/
 725                 status = "okay";
 726         };
 727 };
 728
 729 &mipi_dphy {
 730         status = "okay";
 731 };
 732
 733 &co_process {
 734         status = "okay";
 735 };
 736
 737 &usbdrd30 {
 738         pinctrl-names = "default";
 739         pinctrl-0 = <&usb_pins>;
 740         dr_mode = "host"; /*host or peripheral*/
 741         status = "disabled";
 742 };
 743
 744 &xrp {
 745         status = "okay";
 746 };