arch/powerpc/sysdev/cpm1.c

   1 /*
   2  * General Purpose functions for the global management of the
   3  * Communication Processor Module.
   4  * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
   5  *
   6  * In addition to the individual control of the communication
   7  * channels, there are a few functions that globally affect the
   8  * communication processor.
   9  *
  10  * Buffer descriptors must be allocated from the dual ported memory
  11  * space.  The allocator for that is here.  When the communication
  12  * process is reset, we reclaim the memory available.  There is
  13  * currently no deallocator for this memory.
  14  * The amount of space available is platform dependent.  On the
  15  * MBX, the EPPC software loads additional microcode into the
  16  * communication processor, and uses some of the DP ram for this
  17  * purpose.  Current, the first 512 bytes and the last 256 bytes of
  18  * memory are used.  Right now I am conservative and only use the
  19  * memory that can never be used for microcode.  If there are
  20  * applications that require more DP ram, we can expand the boundaries
  21  * but then we have to be careful of any downloaded microcode.
  22  */
  23 #include <linux/errno.h>
  24 #include <linux/sched.h>
  25 #include <linux/kernel.h>
  26 #include <linux/dma-mapping.h>
  27 #include <linux/param.h>
  28 #include <linux/string.h>
  29 #include <linux/mm.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/irq.h>
  32 #include <linux/module.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/slab.h>
  35 #include <asm/page.h>
  36 #include <asm/pgtable.h>
  37 #include <asm/8xx_immap.h>
  38 #include <asm/cpm1.h>
  39 #include <asm/io.h>
  40 #include <asm/tlbflush.h>
  41 #include <asm/rheap.h>
  42 #include <asm/prom.h>
  43 #include <asm/cpm.h>
  44
  45 #include <asm/fs_pd.h>
  46
  47 #ifdef CONFIG_8xx_GPIO
  48 #include <linux/of_gpio.h>
  49 #endif
  50
  51 #define CPM_MAP_SIZE    (0x4000)
  52
  53 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
  54 immap_t __iomem *mpc8xx_immr;
  55 static cpic8xx_t __iomem *cpic_reg;
  56
  57 static struct irq_domain *cpm_pic_host;
  58
  59 static void cpm_mask_irq(struct irq_data *d)
  60 {
  61         unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
  62
  63         clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
  64 }
  65
  66 static void cpm_unmask_irq(struct irq_data *d)
  67 {
  68         unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
  69
  70         setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
  71 }
  72
  73 static void cpm_end_irq(struct irq_data *d)
  74 {
  75         unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
  76
  77         out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
  78 }
  79
  80 static struct irq_chip cpm_pic = {
  81         .name = "CPM PIC",
  82         .irq_mask = cpm_mask_irq,
  83         .irq_unmask = cpm_unmask_irq,
  84         .irq_eoi = cpm_end_irq,
  85 };
  86
  87 int cpm_get_irq(void)
  88 {
  89         int cpm_vec;
  90
  91         /* Get the vector by setting the ACK bit and then reading
  92          * the register.
  93          */
  94         out_be16(&cpic_reg->cpic_civr, 1);
  95         cpm_vec = in_be16(&cpic_reg->cpic_civr);
  96         cpm_vec >>= 11;
  97
  98         return irq_linear_revmap(cpm_pic_host, cpm_vec);
  99 }
 100
 101 static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
 102                           irq_hw_number_t hw)
 103 {
 104         pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
 105
 106         irq_set_status_flags(virq, IRQ_LEVEL);
 107         irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
 108         return 0;
 109 }
 110
 111 /* The CPM can generate the error interrupt when there is a race condition
 112  * between generating and masking interrupts.  All we have to do is ACK it
 113  * and return.  This is a no-op function so we don't need any special
 114  * tests in the interrupt handler.
 115  */
 116 static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 117 {
 118         return IRQ_HANDLED;
 119 }
 120
 121 static struct irqaction cpm_error_irqaction = {
 122         .handler = cpm_error_interrupt,
 123         .flags = IRQF_NO_THREAD,
 124         .name = "error",
 125 };
 126
 127 static const struct irq_domain_ops cpm_pic_host_ops = {
 128         .map = cpm_pic_host_map,
 129 };
 130
 131 unsigned int cpm_pic_init(void)
 132 {
 133         struct device_node *np = NULL;
 134         struct resource res;
 135         unsigned int sirq = NO_IRQ, hwirq, eirq;
 136         int ret;
 137
 138         pr_debug("cpm_pic_init\n");
 139
 140         np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
 141         if (np == NULL)
 142                 np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
 143         if (np == NULL) {
 144                 printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
 145                 return sirq;
 146         }
 147
 148         ret = of_address_to_resource(np, 0, &res);
 149         if (ret)
 150                 goto end;
 151
 152         cpic_reg = ioremap(res.start, resource_size(&res));
 153         if (cpic_reg == NULL)
 154                 goto end;
 155
 156         sirq = irq_of_parse_and_map(np, 0);
 157         if (sirq == NO_IRQ)
 158                 goto end;
 159
 160         /* Initialize the CPM interrupt controller. */
 161         hwirq = (unsigned int)virq_to_hw(sirq);
 162         out_be32(&cpic_reg->cpic_cicr,
 163             (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
 164                 ((hwirq/2) << 13) | CICR_HP_MASK);
 165
 166         out_be32(&cpic_reg->cpic_cimr, 0);
 167
 168         cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
 169         if (cpm_pic_host == NULL) {
 170                 printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
 171                 sirq = NO_IRQ;
 172                 goto end;
 173         }
 174
 175         /* Install our own error handler. */
 176         np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
 177         if (np == NULL)
 178                 np = of_find_node_by_type(NULL, "cpm");
 179         if (np == NULL) {
 180                 printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
 181                 goto end;
 182         }
 183
 184         eirq = irq_of_parse_and_map(np, 0);
 185         if (eirq == NO_IRQ)
 186                 goto end;
 187
 188         if (setup_irq(eirq, &cpm_error_irqaction))
 189                 printk(KERN_ERR "Could not allocate CPM error IRQ!");
 190
 191         setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
 192
 193 end:
 194         of_node_put(np);
 195         return sirq;
 196 }
 197
 198 void __init cpm_reset(void)
 199 {
 200         sysconf8xx_t __iomem *siu_conf;
 201
 202         mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
 203         if (!mpc8xx_immr) {
 204                 printk(KERN_CRIT "Could not map IMMR\n");
 205                 return;
 206         }
 207
 208         cpmp = &mpc8xx_immr->im_cpm;
 209
 210 #ifndef CONFIG_PPC_EARLY_DEBUG_CPM
 211         /* Perform a reset.
 212         */
 213         out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
 214
 215         /* Wait for it.
 216         */
 217         while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
 218 #endif
 219
 220 #ifdef CONFIG_UCODE_PATCH
 221         cpm_load_patch(cpmp);
 222 #endif
 223
 224         /* Set SDMA Bus Request priority 5.
 225          * On 860T, this also enables FEC priority 6.  I am not sure
 226          * this is what we really want for some applications, but the
 227          * manual recommends it.
 228          * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 229          */
 230         siu_conf = immr_map(im_siu_conf);
 231         if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
 232                 out_be32(&siu_conf->sc_sdcr, 0x40);
 233         else
 234                 out_be32(&siu_conf->sc_sdcr, 1);
 235         immr_unmap(siu_conf);
 236
 237         cpm_muram_init();
 238 }
 239
 240 static DEFINE_SPINLOCK(cmd_lock);
 241
 242 #define MAX_CR_CMD_LOOPS        10000
 243
 244 int cpm_command(u32 command, u8 opcode)
 245 {
 246         int i, ret;
 247         unsigned long flags;
 248
 249         if (command & 0xffffff0f)
 250                 return -EINVAL;
 251
 252         spin_lock_irqsave(&cmd_lock, flags);
 253
 254         ret = 0;
 255         out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
 256         for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
 257                 if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 258                         goto out;
 259
 260         printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 261         ret = -EIO;
 262 out:
 263         spin_unlock_irqrestore(&cmd_lock, flags);
 264         return ret;
 265 }
 266 EXPORT_SYMBOL(cpm_command);
 267
 268 /* Set a baud rate generator.  This needs lots of work.  There are
 269  * four BRGs, any of which can be wired to any channel.
 270  * The internal baud rate clock is the system clock divided by 16.
 271  * This assumes the baudrate is 16x oversampled by the uart.
 272  */
 273 #define BRG_INT_CLK             (get_brgfreq())
 274 #define BRG_UART_CLK            (BRG_INT_CLK/16)
 275 #define BRG_UART_CLK_DIV16      (BRG_UART_CLK/16)
 276
 277 void
 278 cpm_setbrg(uint brg, uint rate)
 279 {
 280         u32 __iomem *bp;
 281
 282         /* This is good enough to get SMCs running.....
 283         */
 284         bp = &cpmp->cp_brgc1;
 285         bp += brg;
 286         /* The BRG has a 12-bit counter.  For really slow baud rates (or
 287          * really fast processors), we may have to further divide by 16.
 288          */
 289         if (((BRG_UART_CLK / rate) - 1) < 4096)
 290                 out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
 291         else
 292                 out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
 293                               CPM_BRG_EN | CPM_BRG_DIV16);
 294 }
 295
 296 struct cpm_ioport16 {
 297         __be16 dir, par, odr_sor, dat, intr;
 298         __be16 res[3];
 299 };
 300
 301 struct cpm_ioport32b {
 302         __be32 dir, par, odr, dat;
 303 };
 304
 305 struct cpm_ioport32e {
 306         __be32 dir, par, sor, odr, dat;
 307 };
 308
 309 static void cpm1_set_pin32(int port, int pin, int flags)
 310 {
 311         struct cpm_ioport32e __iomem *iop;
 312         pin = 1 << (31 - pin);
 313
 314         if (port == CPM_PORTB)
 315                 iop = (struct cpm_ioport32e __iomem *)
 316                       &mpc8xx_immr->im_cpm.cp_pbdir;
 317         else
 318                 iop = (struct cpm_ioport32e __iomem *)
 319                       &mpc8xx_immr->im_cpm.cp_pedir;
 320
 321         if (flags & CPM_PIN_OUTPUT)
 322                 setbits32(&iop->dir, pin);
 323         else
 324                 clrbits32(&iop->dir, pin);
 325
 326         if (!(flags & CPM_PIN_GPIO))
 327                 setbits32(&iop->par, pin);
 328         else
 329                 clrbits32(&iop->par, pin);
 330
 331         if (port == CPM_PORTB) {
 332                 if (flags & CPM_PIN_OPENDRAIN)
 333                         setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
 334                 else
 335                         clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
 336         }
 337
 338         if (port == CPM_PORTE) {
 339                 if (flags & CPM_PIN_SECONDARY)
 340                         setbits32(&iop->sor, pin);
 341                 else
 342                         clrbits32(&iop->sor, pin);
 343
 344                 if (flags & CPM_PIN_OPENDRAIN)
 345                         setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
 346                 else
 347                         clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
 348         }
 349 }
 350
 351 static void cpm1_set_pin16(int port, int pin, int flags)
 352 {
 353         struct cpm_ioport16 __iomem *iop =
 354                 (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
 355
 356         pin = 1 << (15 - pin);
 357
 358         if (port != 0)
 359                 iop += port - 1;
 360
 361         if (flags & CPM_PIN_OUTPUT)
 362                 setbits16(&iop->dir, pin);
 363         else
 364                 clrbits16(&iop->dir, pin);
 365
 366         if (!(flags & CPM_PIN_GPIO))
 367                 setbits16(&iop->par, pin);
 368         else
 369                 clrbits16(&iop->par, pin);
 370
 371         if (port == CPM_PORTA) {
 372                 if (flags & CPM_PIN_OPENDRAIN)
 373                         setbits16(&iop->odr_sor, pin);
 374                 else
 375                         clrbits16(&iop->odr_sor, pin);
 376         }
 377         if (port == CPM_PORTC) {
 378                 if (flags & CPM_PIN_SECONDARY)
 379                         setbits16(&iop->odr_sor, pin);
 380                 else
 381                         clrbits16(&iop->odr_sor, pin);
 382         }
 383 }
 384
 385 void cpm1_set_pin(enum cpm_port port, int pin, int flags)
 386 {
 387         if (port == CPM_PORTB || port == CPM_PORTE)
 388                 cpm1_set_pin32(port, pin, flags);
 389         else
 390                 cpm1_set_pin16(port, pin, flags);
 391 }
 392
 393 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 394 {
 395         int shift;
 396         int i, bits = 0;
 397         u32 __iomem *reg;
 398         u32 mask = 7;
 399
 400         u8 clk_map[][3] = {
 401                 {CPM_CLK_SCC1, CPM_BRG1, 0},
 402                 {CPM_CLK_SCC1, CPM_BRG2, 1},
 403                 {CPM_CLK_SCC1, CPM_BRG3, 2},
 404                 {CPM_CLK_SCC1, CPM_BRG4, 3},
 405                 {CPM_CLK_SCC1, CPM_CLK1, 4},
 406                 {CPM_CLK_SCC1, CPM_CLK2, 5},
 407                 {CPM_CLK_SCC1, CPM_CLK3, 6},
 408                 {CPM_CLK_SCC1, CPM_CLK4, 7},
 409
 410                 {CPM_CLK_SCC2, CPM_BRG1, 0},
 411                 {CPM_CLK_SCC2, CPM_BRG2, 1},
 412                 {CPM_CLK_SCC2, CPM_BRG3, 2},
 413                 {CPM_CLK_SCC2, CPM_BRG4, 3},
 414                 {CPM_CLK_SCC2, CPM_CLK1, 4},
 415                 {CPM_CLK_SCC2, CPM_CLK2, 5},
 416                 {CPM_CLK_SCC2, CPM_CLK3, 6},
 417                 {CPM_CLK_SCC2, CPM_CLK4, 7},
 418
 419                 {CPM_CLK_SCC3, CPM_BRG1, 0},
 420                 {CPM_CLK_SCC3, CPM_BRG2, 1},
 421                 {CPM_CLK_SCC3, CPM_BRG3, 2},
 422                 {CPM_CLK_SCC3, CPM_BRG4, 3},
 423                 {CPM_CLK_SCC3, CPM_CLK5, 4},
 424                 {CPM_CLK_SCC3, CPM_CLK6, 5},
 425                 {CPM_CLK_SCC3, CPM_CLK7, 6},
 426                 {CPM_CLK_SCC3, CPM_CLK8, 7},
 427
 428                 {CPM_CLK_SCC4, CPM_BRG1, 0},
 429                 {CPM_CLK_SCC4, CPM_BRG2, 1},
 430                 {CPM_CLK_SCC4, CPM_BRG3, 2},
 431                 {CPM_CLK_SCC4, CPM_BRG4, 3},
 432                 {CPM_CLK_SCC4, CPM_CLK5, 4},
 433                 {CPM_CLK_SCC4, CPM_CLK6, 5},
 434                 {CPM_CLK_SCC4, CPM_CLK7, 6},
 435                 {CPM_CLK_SCC4, CPM_CLK8, 7},
 436
 437                 {CPM_CLK_SMC1, CPM_BRG1, 0},
 438                 {CPM_CLK_SMC1, CPM_BRG2, 1},
 439                 {CPM_CLK_SMC1, CPM_BRG3, 2},
 440                 {CPM_CLK_SMC1, CPM_BRG4, 3},
 441                 {CPM_CLK_SMC1, CPM_CLK1, 4},
 442                 {CPM_CLK_SMC1, CPM_CLK2, 5},
 443                 {CPM_CLK_SMC1, CPM_CLK3, 6},
 444                 {CPM_CLK_SMC1, CPM_CLK4, 7},
 445
 446                 {CPM_CLK_SMC2, CPM_BRG1, 0},
 447                 {CPM_CLK_SMC2, CPM_BRG2, 1},
 448                 {CPM_CLK_SMC2, CPM_BRG3, 2},
 449                 {CPM_CLK_SMC2, CPM_BRG4, 3},
 450                 {CPM_CLK_SMC2, CPM_CLK5, 4},
 451                 {CPM_CLK_SMC2, CPM_CLK6, 5},
 452                 {CPM_CLK_SMC2, CPM_CLK7, 6},
 453                 {CPM_CLK_SMC2, CPM_CLK8, 7},
 454         };
 455
 456         switch (target) {
 457         case CPM_CLK_SCC1:
 458                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
 459                 shift = 0;
 460                 break;
 461
 462         case CPM_CLK_SCC2:
 463                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
 464                 shift = 8;
 465                 break;
 466
 467         case CPM_CLK_SCC3:
 468                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
 469                 shift = 16;
 470                 break;
 471
 472         case CPM_CLK_SCC4:
 473                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
 474                 shift = 24;
 475                 break;
 476
 477         case CPM_CLK_SMC1:
 478                 reg = &mpc8xx_immr->im_cpm.cp_simode;
 479                 shift = 12;
 480                 break;
 481
 482         case CPM_CLK_SMC2:
 483                 reg = &mpc8xx_immr->im_cpm.cp_simode;
 484                 shift = 28;
 485                 break;
 486
 487         default:
 488                 printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
 489                 return -EINVAL;
 490         }
 491
 492         for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
 493                 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
 494                         bits = clk_map[i][2];
 495                         break;
 496                 }
 497         }
 498
 499         if (i == ARRAY_SIZE(clk_map)) {
 500                 printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
 501                 return -EINVAL;
 502         }
 503
 504         bits <<= shift;
 505         mask <<= shift;
 506
 507         if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
 508                 if (mode == CPM_CLK_RTX) {
 509                         bits |= bits << 3;
 510                         mask |= mask << 3;
 511                 } else if (mode == CPM_CLK_RX) {
 512                         bits <<= 3;
 513                         mask <<= 3;
 514                 }
 515         }
 516
 517         out_be32(reg, (in_be32(reg) & ~mask) | bits);
 518
 519         return 0;
 520 }
 521
 522 /*
 523  * GPIO LIB API implementation
 524  */
 525 #ifdef CONFIG_8xx_GPIO
 526
 527 struct cpm1_gpio16_chip {
 528         struct of_mm_gpio_chip mm_gc;
 529         spinlock_t lock;
 530
 531         /* shadowed data register to clear/set bits safely */
 532         u16 cpdata;
 533 };
 534
 535 static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
 536 {
 537         struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 538         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 539
 540         cpm1_gc->cpdata = in_be16(&iop->dat);
 541 }
 542
 543 static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
 544 {
 545         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 546         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 547         u16 pin_mask;
 548
 549         pin_mask = 1 << (15 - gpio);
 550
 551         return !!(in_be16(&iop->dat) & pin_mask);
 552 }
 553
 554 static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
 555         int value)
 556 {
 557         struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 558         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 559
 560         if (value)
 561                 cpm1_gc->cpdata |= pin_mask;
 562         else
 563                 cpm1_gc->cpdata &= ~pin_mask;
 564
 565         out_be16(&iop->dat, cpm1_gc->cpdata);
 566 }
 567
 568 static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 569 {
 570         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 571         struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 572         unsigned long flags;
 573         u16 pin_mask = 1 << (15 - gpio);
 574
 575         spin_lock_irqsave(&cpm1_gc->lock, flags);
 576
 577         __cpm1_gpio16_set(mm_gc, pin_mask, value);
 578
 579         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 580 }
 581
 582 static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 583 {
 584         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 585         struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 586         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 587         unsigned long flags;
 588         u16 pin_mask = 1 << (15 - gpio);
 589
 590         spin_lock_irqsave(&cpm1_gc->lock, flags);
 591
 592         setbits16(&iop->dir, pin_mask);
 593         __cpm1_gpio16_set(mm_gc, pin_mask, val);
 594
 595         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 596
 597         return 0;
 598 }
 599
 600 static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
 601 {
 602         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 603         struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 604         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 605         unsigned long flags;
 606         u16 pin_mask = 1 << (15 - gpio);
 607
 608         spin_lock_irqsave(&cpm1_gc->lock, flags);
 609
 610         clrbits16(&iop->dir, pin_mask);
 611
 612         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 613
 614         return 0;
 615 }
 616
 617 int cpm1_gpiochip_add16(struct device_node *np)
 618 {
 619         struct cpm1_gpio16_chip *cpm1_gc;
 620         struct of_mm_gpio_chip *mm_gc;
 621         struct gpio_chip *gc;
 622
 623         cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
 624         if (!cpm1_gc)
 625                 return -ENOMEM;
 626
 627         spin_lock_init(&cpm1_gc->lock);
 628
 629         mm_gc = &cpm1_gc->mm_gc;
 630         gc = &mm_gc->gc;
 631
 632         mm_gc->save_regs = cpm1_gpio16_save_regs;
 633         gc->ngpio = 16;
 634         gc->direction_input = cpm1_gpio16_dir_in;
 635         gc->direction_output = cpm1_gpio16_dir_out;
 636         gc->get = cpm1_gpio16_get;
 637         gc->set = cpm1_gpio16_set;
 638
 639         return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
 640 }
 641
 642 struct cpm1_gpio32_chip {
 643         struct of_mm_gpio_chip mm_gc;
 644         spinlock_t lock;
 645
 646         /* shadowed data register to clear/set bits safely */
 647         u32 cpdata;
 648 };
 649
 650 static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
 651 {
 652         struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 653         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 654
 655         cpm1_gc->cpdata = in_be32(&iop->dat);
 656 }
 657
 658 static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 659 {
 660         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 661         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 662         u32 pin_mask;
 663
 664         pin_mask = 1 << (31 - gpio);
 665
 666         return !!(in_be32(&iop->dat) & pin_mask);
 667 }
 668
 669 static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
 670         int value)
 671 {
 672         struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 673         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 674
 675         if (value)
 676                 cpm1_gc->cpdata |= pin_mask;
 677         else
 678                 cpm1_gc->cpdata &= ~pin_mask;
 679
 680         out_be32(&iop->dat, cpm1_gc->cpdata);
 681 }
 682
 683 static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 684 {
 685         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 686         struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 687         unsigned long flags;
 688         u32 pin_mask = 1 << (31 - gpio);
 689
 690         spin_lock_irqsave(&cpm1_gc->lock, flags);
 691
 692         __cpm1_gpio32_set(mm_gc, pin_mask, value);
 693
 694         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 695 }
 696
 697 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 698 {
 699         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 700         struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 701         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 702         unsigned long flags;
 703         u32 pin_mask = 1 << (31 - gpio);
 704
 705         spin_lock_irqsave(&cpm1_gc->lock, flags);
 706
 707         setbits32(&iop->dir, pin_mask);
 708         __cpm1_gpio32_set(mm_gc, pin_mask, val);
 709
 710         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 711
 712         return 0;
 713 }
 714
 715 static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
 716 {
 717         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 718         struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 719         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 720         unsigned long flags;
 721         u32 pin_mask = 1 << (31 - gpio);
 722
 723         spin_lock_irqsave(&cpm1_gc->lock, flags);
 724
 725         clrbits32(&iop->dir, pin_mask);
 726
 727         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 728
 729         return 0;
 730 }
 731
 732 int cpm1_gpiochip_add32(struct device_node *np)
 733 {
 734         struct cpm1_gpio32_chip *cpm1_gc;
 735         struct of_mm_gpio_chip *mm_gc;
 736         struct gpio_chip *gc;
 737
 738         cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
 739         if (!cpm1_gc)
 740                 return -ENOMEM;
 741
 742         spin_lock_init(&cpm1_gc->lock);
 743
 744         mm_gc = &cpm1_gc->mm_gc;
 745         gc = &mm_gc->gc;
 746
 747         mm_gc->save_regs = cpm1_gpio32_save_regs;
 748         gc->ngpio = 32;
 749         gc->direction_input = cpm1_gpio32_dir_in;
 750         gc->direction_output = cpm1_gpio32_dir_out;
 751         gc->get = cpm1_gpio32_get;
 752         gc->set = cpm1_gpio32_set;
 753
 754         return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
 755 }
 756
 757 static int cpm_init_par_io(void)
 758 {
 759         struct device_node *np;
 760
 761         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
 762                 cpm1_gpiochip_add16(np);
 763
 764         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
 765                 cpm1_gpiochip_add32(np);
 766
 767         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
 768                 cpm1_gpiochip_add16(np);
 769
 770         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
 771                 cpm1_gpiochip_add16(np);
 772
 773         /* Port E uses CPM2 layout */
 774         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
 775                 cpm2_gpiochip_add32(np);
 776         return 0;
 777 }
 778 arch_initcall(cpm_init_par_io);
 779
 780 #endif /* CONFIG_8xx_GPIO */