Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
[platform/adaptation/renesas_rcar/renesas_kernel.git] / arch / powerpc / platforms / powernv / pci.c
1 /*
2  * Support PCI/PCIe on PowerNV platforms
3  *
4  * Currently supports only P5IOC2
5  *
6  * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * as published by the Free Software Foundation; either version
11  * 2 of the License, or (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/delay.h>
17 #include <linux/string.h>
18 #include <linux/init.h>
19 #include <linux/bootmem.h>
20 #include <linux/irq.h>
21 #include <linux/io.h>
22 #include <linux/msi.h>
23
24 #include <asm/sections.h>
25 #include <asm/io.h>
26 #include <asm/prom.h>
27 #include <asm/pci-bridge.h>
28 #include <asm/machdep.h>
29 #include <asm/msi_bitmap.h>
30 #include <asm/ppc-pci.h>
31 #include <asm/opal.h>
32 #include <asm/iommu.h>
33 #include <asm/tce.h>
34 #include <asm/firmware.h>
35
36 #include "powernv.h"
37 #include "pci.h"
38
39 /* Delay in usec */
40 #define PCI_RESET_DELAY_US      3000000
41
42 #define cfg_dbg(fmt...) do { } while(0)
43 //#define cfg_dbg(fmt...)       printk(fmt)
44
45 #ifdef CONFIG_PCI_MSI
46 static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
47 {
48         struct pci_controller *hose = pci_bus_to_host(pdev->bus);
49         struct pnv_phb *phb = hose->private_data;
50
51         return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
52 }
53
54 static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
55 {
56         struct pci_controller *hose = pci_bus_to_host(pdev->bus);
57         struct pnv_phb *phb = hose->private_data;
58         struct msi_desc *entry;
59         struct msi_msg msg;
60         int hwirq;
61         unsigned int virq;
62         int rc;
63
64         if (WARN_ON(!phb))
65                 return -ENODEV;
66
67         list_for_each_entry(entry, &pdev->msi_list, list) {
68                 if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
69                         pr_warn("%s: Supports only 64-bit MSIs\n",
70                                 pci_name(pdev));
71                         return -ENXIO;
72                 }
73                 hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, 1);
74                 if (hwirq < 0) {
75                         pr_warn("%s: Failed to find a free MSI\n",
76                                 pci_name(pdev));
77                         return -ENOSPC;
78                 }
79                 virq = irq_create_mapping(NULL, phb->msi_base + hwirq);
80                 if (virq == NO_IRQ) {
81                         pr_warn("%s: Failed to map MSI to linux irq\n",
82                                 pci_name(pdev));
83                         msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
84                         return -ENOMEM;
85                 }
86                 rc = phb->msi_setup(phb, pdev, phb->msi_base + hwirq,
87                                     virq, entry->msi_attrib.is_64, &msg);
88                 if (rc) {
89                         pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
90                         irq_dispose_mapping(virq);
91                         msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
92                         return rc;
93                 }
94                 irq_set_msi_desc(virq, entry);
95                 write_msi_msg(virq, &msg);
96         }
97         return 0;
98 }
99
100 static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
101 {
102         struct pci_controller *hose = pci_bus_to_host(pdev->bus);
103         struct pnv_phb *phb = hose->private_data;
104         struct msi_desc *entry;
105
106         if (WARN_ON(!phb))
107                 return;
108
109         list_for_each_entry(entry, &pdev->msi_list, list) {
110                 if (entry->irq == NO_IRQ)
111                         continue;
112                 irq_set_msi_desc(entry->irq, NULL);
113                 msi_bitmap_free_hwirqs(&phb->msi_bmp,
114                         virq_to_hw(entry->irq) - phb->msi_base, 1);
115                 irq_dispose_mapping(entry->irq);
116         }
117 }
118 #endif /* CONFIG_PCI_MSI */
119
120 static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
121 {
122         struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
123         int i;
124
125         pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
126
127         pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
128
129         pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
130         pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
131         pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
132
133         pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
134         pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
135         pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
136         pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
137         pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
138
139         pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
140         pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
141         pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
142         pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
143         pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
144         pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
145         pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
146         pr_info("  sourceId             = 0x%08x\n", data->sourceId);
147
148         pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
149         pr_info("  correlator           = 0x%016llx\n", data->correlator);
150
151         pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
152         pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
153         pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
154         pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
155         pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
156         pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
157         pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
158         pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
159         pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
160         pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
161         pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
162         pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
163         pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
164         pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
165         pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
166         pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
167         pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
168         pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
169         pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
170         pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
171         pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
172
173         for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
174                 if ((data->pestA[i] >> 63) == 0 &&
175                     (data->pestB[i] >> 63) == 0)
176                         continue;
177                 pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
178                 pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
179         }
180 }
181
182 static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
183 {
184         switch(phb->model) {
185         case PNV_PHB_MODEL_P7IOC:
186                 pnv_pci_dump_p7ioc_diag_data(phb);
187                 break;
188         default:
189                 pr_warning("PCI %d: Can't decode this PHB diag data\n",
190                            phb->hose->global_number);
191         }
192 }
193
194 static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
195 {
196         unsigned long flags, rc;
197         int has_diag;
198
199         spin_lock_irqsave(&phb->lock, flags);
200
201         rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
202         has_diag = (rc == OPAL_SUCCESS);
203
204         rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
205                                        OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
206         if (rc) {
207                 pr_warning("PCI %d: Failed to clear EEH freeze state"
208                            " for PE#%d, err %ld\n",
209                            phb->hose->global_number, pe_no, rc);
210
211                 /* For now, let's only display the diag buffer when we fail to clear
212                  * the EEH status. We'll do more sensible things later when we have
213                  * proper EEH support. We need to make sure we don't pollute ourselves
214                  * with the normal errors generated when probing empty slots
215                  */
216                 if (has_diag)
217                         pnv_pci_dump_phb_diag_data(phb);
218                 else
219                         pr_warning("PCI %d: No diag data available\n",
220                                    phb->hose->global_number);
221         }
222
223         spin_unlock_irqrestore(&phb->lock, flags);
224 }
225
226 static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
227                                      u32 bdfn)
228 {
229         s64     rc;
230         u8      fstate;
231         u16     pcierr;
232         u32     pe_no;
233
234         /* Get PE# if we support IODA */
235         pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0;
236
237         /* Read freeze status */
238         rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
239                                         NULL);
240         if (rc) {
241                 pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
242                            " err %lld\n", phb->hose->global_number, pe_no, rc);
243                 return;
244         }
245         cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
246                 bdfn, pe_no, fstate);
247         if (fstate != 0)
248                 pnv_pci_handle_eeh_config(phb, pe_no);
249 }
250
251 static int pnv_pci_read_config(struct pci_bus *bus,
252                                unsigned int devfn,
253                                int where, int size, u32 *val)
254 {
255         struct pci_controller *hose = pci_bus_to_host(bus);
256         struct pnv_phb *phb = hose->private_data;
257         u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
258         s64 rc;
259
260         if (hose == NULL)
261                 return PCIBIOS_DEVICE_NOT_FOUND;
262
263         switch (size) {
264         case 1: {
265                 u8 v8;
266                 rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
267                 *val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
268                 break;
269         }
270         case 2: {
271                 u16 v16;
272                 rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
273                                                    &v16);
274                 *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
275                 break;
276         }
277         case 4: {
278                 u32 v32;
279                 rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
280                 *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
281                 break;
282         }
283         default:
284                 return PCIBIOS_FUNC_NOT_SUPPORTED;
285         }
286         cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
287                 bus->number, devfn, where, size, *val);
288
289         /* Check if the PHB got frozen due to an error (no response) */
290         pnv_pci_config_check_eeh(phb, bus, bdfn);
291
292         return PCIBIOS_SUCCESSFUL;
293 }
294
295 static int pnv_pci_write_config(struct pci_bus *bus,
296                                 unsigned int devfn,
297                                 int where, int size, u32 val)
298 {
299         struct pci_controller *hose = pci_bus_to_host(bus);
300         struct pnv_phb *phb = hose->private_data;
301         u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
302
303         if (hose == NULL)
304                 return PCIBIOS_DEVICE_NOT_FOUND;
305
306         cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
307                 bus->number, devfn, where, size, val);
308         switch (size) {
309         case 1:
310                 opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
311                 break;
312         case 2:
313                 opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
314                 break;
315         case 4:
316                 opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
317                 break;
318         default:
319                 return PCIBIOS_FUNC_NOT_SUPPORTED;
320         }
321         /* Check if the PHB got frozen due to an error (no response) */
322         pnv_pci_config_check_eeh(phb, bus, bdfn);
323
324         return PCIBIOS_SUCCESSFUL;
325 }
326
327 struct pci_ops pnv_pci_ops = {
328         .read = pnv_pci_read_config,
329         .write = pnv_pci_write_config,
330 };
331
332 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
333                          unsigned long uaddr, enum dma_data_direction direction,
334                          struct dma_attrs *attrs)
335 {
336         u64 proto_tce;
337         u64 *tcep, *tces;
338         u64 rpn;
339
340         proto_tce = TCE_PCI_READ; // Read allowed
341
342         if (direction != DMA_TO_DEVICE)
343                 proto_tce |= TCE_PCI_WRITE;
344
345         tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
346         rpn = __pa(uaddr) >> TCE_SHIFT;
347
348         while (npages--)
349                 *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
350
351         /* Some implementations won't cache invalid TCEs and thus may not
352          * need that flush. We'll probably turn it_type into a bit mask
353          * of flags if that becomes the case
354          */
355         if (tbl->it_type & TCE_PCI_SWINV_CREATE)
356                 pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
357
358         return 0;
359 }
360
361 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
362 {
363         u64 *tcep, *tces;
364
365         tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
366
367         while (npages--)
368                 *(tcep++) = 0;
369
370         if (tbl->it_type & TCE_PCI_SWINV_CREATE)
371                 pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
372 }
373
374 static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
375 {
376         return ((u64 *)tbl->it_base)[index - tbl->it_offset];
377 }
378
379 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
380                                void *tce_mem, u64 tce_size,
381                                u64 dma_offset)
382 {
383         tbl->it_blocksize = 16;
384         tbl->it_base = (unsigned long)tce_mem;
385         tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
386         tbl->it_index = 0;
387         tbl->it_size = tce_size >> 3;
388         tbl->it_busno = 0;
389         tbl->it_type = TCE_PCI;
390 }
391
392 static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
393 {
394         struct iommu_table *tbl;
395         const __be64 *basep, *swinvp;
396         const __be32 *sizep;
397
398         basep = of_get_property(hose->dn, "linux,tce-base", NULL);
399         sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
400         if (basep == NULL || sizep == NULL) {
401                 pr_err("PCI: %s has missing tce entries !\n",
402                        hose->dn->full_name);
403                 return NULL;
404         }
405         tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
406         if (WARN_ON(!tbl))
407                 return NULL;
408         pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
409                                   be32_to_cpup(sizep), 0);
410         iommu_init_table(tbl, hose->node);
411
412         /* Deal with SW invalidated TCEs when needed (BML way) */
413         swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
414                                  NULL);
415         if (swinvp) {
416                 tbl->it_busno = swinvp[1];
417                 tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
418                 tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
419         }
420         return tbl;
421 }
422
423 static void pnv_pci_dma_fallback_setup(struct pci_controller *hose,
424                                        struct pci_dev *pdev)
425 {
426         struct device_node *np = pci_bus_to_OF_node(hose->bus);
427         struct pci_dn *pdn;
428
429         if (np == NULL)
430                 return;
431         pdn = PCI_DN(np);
432         if (!pdn->iommu_table)
433                 pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
434         if (!pdn->iommu_table)
435                 return;
436         set_iommu_table_base(&pdev->dev, pdn->iommu_table);
437 }
438
439 static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
440 {
441         struct pci_controller *hose = pci_bus_to_host(pdev->bus);
442         struct pnv_phb *phb = hose->private_data;
443
444         /* If we have no phb structure, try to setup a fallback based on
445          * the device-tree (RTAS PCI for example)
446          */
447         if (phb && phb->dma_dev_setup)
448                 phb->dma_dev_setup(phb, pdev);
449         else
450                 pnv_pci_dma_fallback_setup(hose, pdev);
451 }
452
453 /* Fixup wrong class code in p7ioc and p8 root complex */
454 static void pnv_p7ioc_rc_quirk(struct pci_dev *dev)
455 {
456         dev->class = PCI_CLASS_BRIDGE_PCI << 8;
457 }
458 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
459
460 static int pnv_pci_probe_mode(struct pci_bus *bus)
461 {
462         struct pci_controller *hose = pci_bus_to_host(bus);
463         const __be64 *tstamp;
464         u64 now, target;
465
466
467         /* We hijack this as a way to ensure we have waited long
468          * enough since the reset was lifted on the PCI bus
469          */
470         if (bus != hose->bus)
471                 return PCI_PROBE_NORMAL;
472         tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
473         if (!tstamp || !*tstamp)
474                 return PCI_PROBE_NORMAL;
475
476         now = mftb() / tb_ticks_per_usec;
477         target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
478                 + PCI_RESET_DELAY_US;
479
480         pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
481                  hose->global_number, target, now);
482
483         if (now < target)
484                 msleep((target - now + 999) / 1000);
485
486         return PCI_PROBE_NORMAL;
487 }
488
489 void __init pnv_pci_init(void)
490 {
491         struct device_node *np;
492
493         pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
494
495         /* OPAL absent, try POPAL first then RTAS detection of PHBs */
496         if (!firmware_has_feature(FW_FEATURE_OPAL)) {
497 #ifdef CONFIG_PPC_POWERNV_RTAS
498                 init_pci_config_tokens();
499                 find_and_init_phbs();
500 #endif /* CONFIG_PPC_POWERNV_RTAS */
501         }
502         /* OPAL is here, do our normal stuff */
503         else {
504                 int found_ioda = 0;
505
506                 /* Look for IODA IO-Hubs. We don't support mixing IODA
507                  * and p5ioc2 due to the need to change some global
508                  * probing flags
509                  */
510                 for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
511                         pnv_pci_init_ioda_hub(np);
512                         found_ioda = 1;
513                 }
514
515                 /* Look for p5ioc2 IO-Hubs */
516                 if (!found_ioda)
517                         for_each_compatible_node(np, NULL, "ibm,p5ioc2")
518                                 pnv_pci_init_p5ioc2_hub(np);
519
520                 /* Look for ioda2 built-in PHB3's */
521                 for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
522                         pnv_pci_init_ioda2_phb(np);
523         }
524
525         /* Setup the linkage between OF nodes and PHBs */
526         pci_devs_phb_init();
527
528         /* Configure IOMMU DMA hooks */
529         ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
530         ppc_md.tce_build = pnv_tce_build;
531         ppc_md.tce_free = pnv_tce_free;
532         ppc_md.tce_get = pnv_tce_get;
533         ppc_md.pci_probe_mode = pnv_pci_probe_mode;
534         set_pci_dma_ops(&dma_iommu_ops);
535
536         /* Configure MSIs */
537 #ifdef CONFIG_PCI_MSI
538         ppc_md.msi_check_device = pnv_msi_check_device;
539         ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
540         ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
541 #endif
542 }