arch/powerpc/platforms/powermac/smp.c

   1 /*
   2  * SMP support for power macintosh.
   3  *
   4  * We support both the old "powersurge" SMP architecture
   5  * and the current Core99 (G4 PowerMac) machines.
   6  *
   7  * Note that we don't support the very first rev. of
   8  * Apple/DayStar 2 CPUs board, the one with the funky
   9  * watchdog. Hopefully, none of these should be there except
  10  * maybe internally to Apple. I should probably still add some
  11  * code to detect this card though and disable SMP. --BenH.
  12  *
  13  * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
  14  * and Ben Herrenschmidt <benh@kernel.crashing.org>.
  15  *
  16  * Support for DayStar quad CPU cards
  17  * Copyright (C) XLR8, Inc. 1994-2000
  18  *
  19  *  This program is free software; you can redistribute it and/or
  20  *  modify it under the terms of the GNU General Public License
  21  *  as published by the Free Software Foundation; either version
  22  *  2 of the License, or (at your option) any later version.
  23  */
  24 #include <linux/kernel.h>
  25 #include <linux/sched.h>
  26 #include <linux/smp.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/kernel_stat.h>
  29 #include <linux/delay.h>
  30 #include <linux/init.h>
  31 #include <linux/spinlock.h>
  32 #include <linux/errno.h>
  33 #include <linux/hardirq.h>
  34 #include <linux/cpu.h>
  35 #include <linux/compiler.h>
  36
  37 #include <asm/ptrace.h>
  38 #include <asm/atomic.h>
  39 #include <asm/code-patching.h>
  40 #include <asm/irq.h>
  41 #include <asm/page.h>
  42 #include <asm/pgtable.h>
  43 #include <asm/sections.h>
  44 #include <asm/io.h>
  45 #include <asm/prom.h>
  46 #include <asm/smp.h>
  47 #include <asm/machdep.h>
  48 #include <asm/pmac_feature.h>
  49 #include <asm/time.h>
  50 #include <asm/mpic.h>
  51 #include <asm/cacheflush.h>
  52 #include <asm/keylargo.h>
  53 #include <asm/pmac_low_i2c.h>
  54 #include <asm/pmac_pfunc.h>
  55
  56 #include "pmac.h"
  57
  58 #undef DEBUG
  59
  60 #ifdef DEBUG
  61 #define DBG(fmt...) udbg_printf(fmt)
  62 #else
  63 #define DBG(fmt...)
  64 #endif
  65
  66 extern void __secondary_start_pmac_0(void);
  67 extern int pmac_pfunc_base_install(void);
  68
  69 static void (*pmac_tb_freeze)(int freeze);
  70 static u64 timebase;
  71 static int tb_req;
  72
  73 #ifdef CONFIG_PPC32
  74
  75 /*
  76  * Powersurge (old powermac SMP) support.
  77  */
  78
  79 /* Addresses for powersurge registers */
  80 #define HAMMERHEAD_BASE         0xf8000000
  81 #define HHEAD_CONFIG            0x90
  82 #define HHEAD_SEC_INTR          0xc0
  83
  84 /* register for interrupting the primary processor on the powersurge */
  85 /* N.B. this is actually the ethernet ROM! */
  86 #define PSURGE_PRI_INTR         0xf3019000
  87
  88 /* register for storing the start address for the secondary processor */
  89 /* N.B. this is the PCI config space address register for the 1st bridge */
  90 #define PSURGE_START            0xf2800000
  91
  92 /* Daystar/XLR8 4-CPU card */
  93 #define PSURGE_QUAD_REG_ADDR    0xf8800000
  94
  95 #define PSURGE_QUAD_IRQ_SET     0
  96 #define PSURGE_QUAD_IRQ_CLR     1
  97 #define PSURGE_QUAD_IRQ_PRIMARY 2
  98 #define PSURGE_QUAD_CKSTOP_CTL  3
  99 #define PSURGE_QUAD_PRIMARY_ARB 4
 100 #define PSURGE_QUAD_BOARD_ID    6
 101 #define PSURGE_QUAD_WHICH_CPU   7
 102 #define PSURGE_QUAD_CKSTOP_RDBK 8
 103 #define PSURGE_QUAD_RESET_CTL   11
 104
 105 #define PSURGE_QUAD_OUT(r, v)   (out_8(quad_base + ((r) << 4) + 4, (v)))
 106 #define PSURGE_QUAD_IN(r)       (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
 107 #define PSURGE_QUAD_BIS(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
 108 #define PSURGE_QUAD_BIC(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
 109
 110 /* virtual addresses for the above */
 111 static volatile u8 __iomem *hhead_base;
 112 static volatile u8 __iomem *quad_base;
 113 static volatile u32 __iomem *psurge_pri_intr;
 114 static volatile u8 __iomem *psurge_sec_intr;
 115 static volatile u32 __iomem *psurge_start;
 116
 117 /* values for psurge_type */
 118 #define PSURGE_NONE             -1
 119 #define PSURGE_DUAL             0
 120 #define PSURGE_QUAD_OKEE        1
 121 #define PSURGE_QUAD_COTTON      2
 122 #define PSURGE_QUAD_ICEGRASS    3
 123
 124 /* what sort of powersurge board we have */
 125 static int psurge_type = PSURGE_NONE;
 126
 127 /*
 128  * Set and clear IPIs for powersurge.
 129  */
 130 static inline void psurge_set_ipi(int cpu)
 131 {
 132         if (psurge_type == PSURGE_NONE)
 133                 return;
 134         if (cpu == 0)
 135                 in_be32(psurge_pri_intr);
 136         else if (psurge_type == PSURGE_DUAL)
 137                 out_8(psurge_sec_intr, 0);
 138         else
 139                 PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
 140 }
 141
 142 static inline void psurge_clr_ipi(int cpu)
 143 {
 144         if (cpu > 0) {
 145                 switch(psurge_type) {
 146                 case PSURGE_DUAL:
 147                         out_8(psurge_sec_intr, ~0);
 148                 case PSURGE_NONE:
 149                         break;
 150                 default:
 151                         PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
 152                 }
 153         }
 154 }
 155
 156 /*
 157  * On powersurge (old SMP powermac architecture) we don't have
 158  * separate IPIs for separate messages like openpic does.  Instead
 159  * we have a bitmap for each processor, where a 1 bit means that
 160  * the corresponding message is pending for that processor.
 161  * Ideally each cpu's entry would be in a different cache line.
 162  *  -- paulus.
 163  */
 164 static unsigned long psurge_smp_message[NR_CPUS];
 165
 166 void psurge_smp_message_recv(void)
 167 {
 168         int cpu = smp_processor_id();
 169         int msg;
 170
 171         /* clear interrupt */
 172         psurge_clr_ipi(cpu);
 173
 174         if (num_online_cpus() < 2)
 175                 return;
 176
 177         /* make sure there is a message there */
 178         for (msg = 0; msg < 4; msg++)
 179                 if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
 180                         smp_message_recv(msg);
 181 }
 182
 183 irqreturn_t psurge_primary_intr(int irq, void *d)
 184 {
 185         psurge_smp_message_recv();
 186         return IRQ_HANDLED;
 187 }
 188
 189 static void smp_psurge_message_pass(int target, int msg)
 190 {
 191         int i;
 192
 193         if (num_online_cpus() < 2)
 194                 return;
 195
 196         for_each_online_cpu(i) {
 197                 if (target == MSG_ALL
 198                     || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
 199                     || target == i) {
 200                         set_bit(msg, &psurge_smp_message[i]);
 201                         psurge_set_ipi(i);
 202                 }
 203         }
 204 }
 205
 206 /*
 207  * Determine a quad card presence. We read the board ID register, we
 208  * force the data bus to change to something else, and we read it again.
 209  * It it's stable, then the register probably exist (ugh !)
 210  */
 211 static int __init psurge_quad_probe(void)
 212 {
 213         int type;
 214         unsigned int i;
 215
 216         type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
 217         if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
 218             || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
 219                 return PSURGE_DUAL;
 220
 221         /* looks OK, try a slightly more rigorous test */
 222         /* bogus is not necessarily cacheline-aligned,
 223            though I don't suppose that really matters.  -- paulus */
 224         for (i = 0; i < 100; i++) {
 225                 volatile u32 bogus[8];
 226                 bogus[(0+i)%8] = 0x00000000;
 227                 bogus[(1+i)%8] = 0x55555555;
 228                 bogus[(2+i)%8] = 0xFFFFFFFF;
 229                 bogus[(3+i)%8] = 0xAAAAAAAA;
 230                 bogus[(4+i)%8] = 0x33333333;
 231                 bogus[(5+i)%8] = 0xCCCCCCCC;
 232                 bogus[(6+i)%8] = 0xCCCCCCCC;
 233                 bogus[(7+i)%8] = 0x33333333;
 234                 wmb();
 235                 asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
 236                 mb();
 237                 if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
 238                         return PSURGE_DUAL;
 239         }
 240         return type;
 241 }
 242
 243 static void __init psurge_quad_init(void)
 244 {
 245         int procbits;
 246
 247         if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
 248         procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
 249         if (psurge_type == PSURGE_QUAD_ICEGRASS)
 250                 PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
 251         else
 252                 PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
 253         mdelay(33);
 254         out_8(psurge_sec_intr, ~0);
 255         PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
 256         PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
 257         if (psurge_type != PSURGE_QUAD_ICEGRASS)
 258                 PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
 259         PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
 260         mdelay(33);
 261         PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
 262         mdelay(33);
 263         PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
 264         mdelay(33);
 265 }
 266
 267 static int __init smp_psurge_probe(void)
 268 {
 269         int i, ncpus;
 270         struct device_node *dn;
 271
 272         /* We don't do SMP on the PPC601 -- paulus */
 273         if (PVR_VER(mfspr(SPRN_PVR)) == 1)
 274                 return 1;
 275
 276         /*
 277          * The powersurge cpu board can be used in the generation
 278          * of powermacs that have a socket for an upgradeable cpu card,
 279          * including the 7500, 8500, 9500, 9600.
 280          * The device tree doesn't tell you if you have 2 cpus because
 281          * OF doesn't know anything about the 2nd processor.
 282          * Instead we look for magic bits in magic registers,
 283          * in the hammerhead memory controller in the case of the
 284          * dual-cpu powersurge board.  -- paulus.
 285          */
 286         dn = of_find_node_by_name(NULL, "hammerhead");
 287         if (dn == NULL)
 288                 return 1;
 289         of_node_put(dn);
 290
 291         hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
 292         quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
 293         psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
 294
 295         psurge_type = psurge_quad_probe();
 296         if (psurge_type != PSURGE_DUAL) {
 297                 psurge_quad_init();
 298                 /* All released cards using this HW design have 4 CPUs */
 299                 ncpus = 4;
 300                 /* No sure how timebase sync works on those, let's use SW */
 301                 smp_ops->give_timebase = smp_generic_give_timebase;
 302                 smp_ops->take_timebase = smp_generic_take_timebase;
 303         } else {
 304                 iounmap(quad_base);
 305                 if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
 306                         /* not a dual-cpu card */
 307                         iounmap(hhead_base);
 308                         psurge_type = PSURGE_NONE;
 309                         return 1;
 310                 }
 311                 ncpus = 2;
 312         }
 313
 314         psurge_start = ioremap(PSURGE_START, 4);
 315         psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 316
 317         /* This is necessary because OF doesn't know about the
 318          * secondary cpu(s), and thus there aren't nodes in the
 319          * device tree for them, and smp_setup_cpu_maps hasn't
 320          * set their bits in cpu_present_mask.
 321          */
 322         if (ncpus > NR_CPUS)
 323                 ncpus = NR_CPUS;
 324         for (i = 1; i < ncpus ; ++i)
 325                 set_cpu_present(i, true);
 326
 327         if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 328
 329         return ncpus;
 330 }
 331
 332 static void __init smp_psurge_kick_cpu(int nr)
 333 {
 334         unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
 335         unsigned long a, flags;
 336         int i, j;
 337
 338         /* Defining this here is evil ... but I prefer hiding that
 339          * crap to avoid giving people ideas that they can do the
 340          * same.
 341          */
 342         extern volatile unsigned int cpu_callin_map[NR_CPUS];
 343
 344         /* may need to flush here if secondary bats aren't setup */
 345         for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
 346                 asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
 347         asm volatile("sync");
 348
 349         if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 350
 351         /* This is going to freeze the timeebase, we disable interrupts */
 352         local_irq_save(flags);
 353
 354         out_be32(psurge_start, start);
 355         mb();
 356
 357         psurge_set_ipi(nr);
 358
 359         /*
 360          * We can't use udelay here because the timebase is now frozen.
 361          */
 362         for (i = 0; i < 2000; ++i)
 363                 asm volatile("nop" : : : "memory");
 364         psurge_clr_ipi(nr);
 365
 366         /*
 367          * Also, because the timebase is frozen, we must not return to the
 368          * caller which will try to do udelay's etc... Instead, we wait -here-
 369          * for the CPU to callin.
 370          */
 371         for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
 372                 for (j = 1; j < 10000; j++)
 373                         asm volatile("nop" : : : "memory");
 374                 asm volatile("sync" : : : "memory");
 375         }
 376         if (!cpu_callin_map[nr])
 377                 goto stuck;
 378
 379         /* And we do the TB sync here too for standard dual CPU cards */
 380         if (psurge_type == PSURGE_DUAL) {
 381                 while(!tb_req)
 382                         barrier();
 383                 tb_req = 0;
 384                 mb();
 385                 timebase = get_tb();
 386                 mb();
 387                 while (timebase)
 388                         barrier();
 389                 mb();
 390         }
 391  stuck:
 392         /* now interrupt the secondary, restarting both TBs */
 393         if (psurge_type == PSURGE_DUAL)
 394                 psurge_set_ipi(1);
 395
 396         if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 397 }
 398
 399 static struct irqaction psurge_irqaction = {
 400         .handler = psurge_primary_intr,
 401         .flags = IRQF_DISABLED,
 402         .name = "primary IPI",
 403 };
 404
 405 static void __init smp_psurge_setup_cpu(int cpu_nr)
 406 {
 407         if (cpu_nr != 0)
 408                 return;
 409
 410         /* reset the entry point so if we get another intr we won't
 411          * try to startup again */
 412         out_be32(psurge_start, 0x100);
 413         if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
 414                 printk(KERN_ERR "Couldn't get primary IPI interrupt");
 415 }
 416
 417 void __init smp_psurge_take_timebase(void)
 418 {
 419         if (psurge_type != PSURGE_DUAL)
 420                 return;
 421
 422         tb_req = 1;
 423         mb();
 424         while (!timebase)
 425                 barrier();
 426         mb();
 427         set_tb(timebase >> 32, timebase & 0xffffffff);
 428         timebase = 0;
 429         mb();
 430         set_dec(tb_ticks_per_jiffy/2);
 431 }
 432
 433 void __init smp_psurge_give_timebase(void)
 434 {
 435         /* Nothing to do here */
 436 }
 437
 438 /* PowerSurge-style Macs */
 439 struct smp_ops_t psurge_smp_ops = {
 440         .message_pass   = smp_psurge_message_pass,
 441         .probe          = smp_psurge_probe,
 442         .kick_cpu       = smp_psurge_kick_cpu,
 443         .setup_cpu      = smp_psurge_setup_cpu,
 444         .give_timebase  = smp_psurge_give_timebase,
 445         .take_timebase  = smp_psurge_take_timebase,
 446 };
 447 #endif /* CONFIG_PPC32 - actually powersurge support */
 448
 449 /*
 450  * Core 99 and later support
 451  */
 452
 453
 454 static void smp_core99_give_timebase(void)
 455 {
 456         unsigned long flags;
 457
 458         local_irq_save(flags);
 459
 460         while(!tb_req)
 461                 barrier();
 462         tb_req = 0;
 463         (*pmac_tb_freeze)(1);
 464         mb();
 465         timebase = get_tb();
 466         mb();
 467         while (timebase)
 468                 barrier();
 469         mb();
 470         (*pmac_tb_freeze)(0);
 471         mb();
 472
 473         local_irq_restore(flags);
 474 }
 475
 476
 477 static void __devinit smp_core99_take_timebase(void)
 478 {
 479         unsigned long flags;
 480
 481         local_irq_save(flags);
 482
 483         tb_req = 1;
 484         mb();
 485         while (!timebase)
 486                 barrier();
 487         mb();
 488         set_tb(timebase >> 32, timebase & 0xffffffff);
 489         timebase = 0;
 490         mb();
 491
 492         local_irq_restore(flags);
 493 }
 494
 495 #ifdef CONFIG_PPC64
 496 /*
 497  * G5s enable/disable the timebase via an i2c-connected clock chip.
 498  */
 499 static struct pmac_i2c_bus *pmac_tb_clock_chip_host;
 500 static u8 pmac_tb_pulsar_addr;
 501
 502 static void smp_core99_cypress_tb_freeze(int freeze)
 503 {
 504         u8 data;
 505         int rc;
 506
 507         /* Strangely, the device-tree says address is 0xd2, but darwin
 508          * accesses 0xd0 ...
 509          */
 510         pmac_i2c_setmode(pmac_tb_clock_chip_host,
 511                          pmac_i2c_mode_combined);
 512         rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
 513                            0xd0 | pmac_i2c_read,
 514                            1, 0x81, &data, 1);
 515         if (rc != 0)
 516                 goto bail;
 517
 518         data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
 519
 520         pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
 521         rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
 522                            0xd0 | pmac_i2c_write,
 523                            1, 0x81, &data, 1);
 524
 525  bail:
 526         if (rc != 0) {
 527                 printk("Cypress Timebase %s rc: %d\n",
 528                        freeze ? "freeze" : "unfreeze", rc);
 529                 panic("Timebase freeze failed !\n");
 530         }
 531 }
 532
 533
 534 static void smp_core99_pulsar_tb_freeze(int freeze)
 535 {
 536         u8 data;
 537         int rc;
 538
 539         pmac_i2c_setmode(pmac_tb_clock_chip_host,
 540                          pmac_i2c_mode_combined);
 541         rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
 542                            pmac_tb_pulsar_addr | pmac_i2c_read,
 543                            1, 0x2e, &data, 1);
 544         if (rc != 0)
 545                 goto bail;
 546
 547         data = (data & 0x88) | (freeze ? 0x11 : 0x22);
 548
 549         pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
 550         rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
 551                            pmac_tb_pulsar_addr | pmac_i2c_write,
 552                            1, 0x2e, &data, 1);
 553  bail:
 554         if (rc != 0) {
 555                 printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
 556                        freeze ? "freeze" : "unfreeze", rc);
 557                 panic("Timebase freeze failed !\n");
 558         }
 559 }
 560
 561 static void __init smp_core99_setup_i2c_hwsync(int ncpus)
 562 {
 563         struct device_node *cc = NULL;
 564         struct device_node *p;
 565         const char *name = NULL;
 566         const u32 *reg;
 567         int ok;
 568
 569         /* Look for the clock chip */
 570         while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
 571                 p = of_get_parent(cc);
 572                 ok = p && of_device_is_compatible(p, "uni-n-i2c");
 573                 of_node_put(p);
 574                 if (!ok)
 575                         continue;
 576
 577                 pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
 578                 if (pmac_tb_clock_chip_host == NULL)
 579                         continue;
 580                 reg = of_get_property(cc, "reg", NULL);
 581                 if (reg == NULL)
 582                         continue;
 583                 switch (*reg) {
 584                 case 0xd2:
 585                         if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
 586                                 pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
 587                                 pmac_tb_pulsar_addr = 0xd2;
 588                                 name = "Pulsar";
 589                         } else if (of_device_is_compatible(cc, "cy28508")) {
 590                                 pmac_tb_freeze = smp_core99_cypress_tb_freeze;
 591                                 name = "Cypress";
 592                         }
 593                         break;
 594                 case 0xd4:
 595                         pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
 596                         pmac_tb_pulsar_addr = 0xd4;
 597                         name = "Pulsar";
 598                         break;
 599                 }
 600                 if (pmac_tb_freeze != NULL)
 601                         break;
 602         }
 603         if (pmac_tb_freeze != NULL) {
 604                 /* Open i2c bus for synchronous access */
 605                 if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) {
 606                         printk(KERN_ERR "Failed top open i2c bus for clock"
 607                                " sync, fallback to software sync !\n");
 608                         goto no_i2c_sync;
 609                 }
 610                 printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
 611                        name);
 612                 return;
 613         }
 614  no_i2c_sync:
 615         pmac_tb_freeze = NULL;
 616         pmac_tb_clock_chip_host = NULL;
 617 }
 618
 619
 620
 621 /*
 622  * Newer G5s uses a platform function
 623  */
 624
 625 static void smp_core99_pfunc_tb_freeze(int freeze)
 626 {
 627         struct device_node *cpus;
 628         struct pmf_args args;
 629
 630         cpus = of_find_node_by_path("/cpus");
 631         BUG_ON(cpus == NULL);
 632         args.count = 1;
 633         args.u[0].v = !freeze;
 634         pmf_call_function(cpus, "cpu-timebase", &args);
 635         of_node_put(cpus);
 636 }
 637
 638 #else /* CONFIG_PPC64 */
 639
 640 /*
 641  * SMP G4 use a GPIO to enable/disable the timebase.
 642  */
 643
 644 static unsigned int core99_tb_gpio;     /* Timebase freeze GPIO */
 645
 646 static void smp_core99_gpio_tb_freeze(int freeze)
 647 {
 648         if (freeze)
 649                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
 650         else
 651                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
 652         pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
 653 }
 654
 655
 656 #endif /* !CONFIG_PPC64 */
 657
 658 /* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
 659 volatile static long int core99_l2_cache;
 660 volatile static long int core99_l3_cache;
 661
 662 static void __devinit core99_init_caches(int cpu)
 663 {
 664 #ifndef CONFIG_PPC64
 665         if (!cpu_has_feature(CPU_FTR_L2CR))
 666                 return;
 667
 668         if (cpu == 0) {
 669                 core99_l2_cache = _get_L2CR();
 670                 printk("CPU0: L2CR is %lx\n", core99_l2_cache);
 671         } else {
 672                 printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
 673                 _set_L2CR(0);
 674                 _set_L2CR(core99_l2_cache);
 675                 printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
 676         }
 677
 678         if (!cpu_has_feature(CPU_FTR_L3CR))
 679                 return;
 680
 681         if (cpu == 0){
 682                 core99_l3_cache = _get_L3CR();
 683                 printk("CPU0: L3CR is %lx\n", core99_l3_cache);
 684         } else {
 685                 printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
 686                 _set_L3CR(0);
 687                 _set_L3CR(core99_l3_cache);
 688                 printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
 689         }
 690 #endif /* !CONFIG_PPC64 */
 691 }
 692
 693 static void __init smp_core99_setup(int ncpus)
 694 {
 695 #ifdef CONFIG_PPC64
 696
 697         /* i2c based HW sync on some G5s */
 698         if (of_machine_is_compatible("PowerMac7,2") ||
 699             of_machine_is_compatible("PowerMac7,3") ||
 700             of_machine_is_compatible("RackMac3,1"))
 701                 smp_core99_setup_i2c_hwsync(ncpus);
 702
 703         /* pfunc based HW sync on recent G5s */
 704         if (pmac_tb_freeze == NULL) {
 705                 struct device_node *cpus =
 706                         of_find_node_by_path("/cpus");
 707                 if (cpus &&
 708                     of_get_property(cpus, "platform-cpu-timebase", NULL)) {
 709                         pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
 710                         printk(KERN_INFO "Processor timebase sync using"
 711                                " platform function\n");
 712                 }
 713         }
 714
 715 #else /* CONFIG_PPC64 */
 716
 717         /* GPIO based HW sync on ppc32 Core99 */
 718         if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
 719                 struct device_node *cpu;
 720                 const u32 *tbprop = NULL;
 721
 722                 core99_tb_gpio = KL_GPIO_TB_ENABLE;     /* default value */
 723                 cpu = of_find_node_by_type(NULL, "cpu");
 724                 if (cpu != NULL) {
 725                         tbprop = of_get_property(cpu, "timebase-enable", NULL);
 726                         if (tbprop)
 727                                 core99_tb_gpio = *tbprop;
 728                         of_node_put(cpu);
 729                 }
 730                 pmac_tb_freeze = smp_core99_gpio_tb_freeze;
 731                 printk(KERN_INFO "Processor timebase sync using"
 732                        " GPIO 0x%02x\n", core99_tb_gpio);
 733         }
 734
 735 #endif /* CONFIG_PPC64 */
 736
 737         /* No timebase sync, fallback to software */
 738         if (pmac_tb_freeze == NULL) {
 739                 smp_ops->give_timebase = smp_generic_give_timebase;
 740                 smp_ops->take_timebase = smp_generic_take_timebase;
 741                 printk(KERN_INFO "Processor timebase sync using software\n");
 742         }
 743
 744 #ifndef CONFIG_PPC64
 745         {
 746                 int i;
 747
 748                 /* XXX should get this from reg properties */
 749                 for (i = 1; i < ncpus; ++i)
 750                         set_hard_smp_processor_id(i, i);
 751         }
 752 #endif
 753
 754         /* 32 bits SMP can't NAP */
 755         if (!of_machine_is_compatible("MacRISC4"))
 756                 powersave_nap = 0;
 757 }
 758
 759 static int __init smp_core99_probe(void)
 760 {
 761         struct device_node *cpus;
 762         int ncpus = 0;
 763
 764         if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
 765
 766         /* Count CPUs in the device-tree */
 767         for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
 768                 ++ncpus;
 769
 770         printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
 771
 772         /* Nothing more to do if less than 2 of them */
 773         if (ncpus <= 1)
 774                 return 1;
 775
 776         /* We need to perform some early initialisations before we can start
 777          * setting up SMP as we are running before initcalls
 778          */
 779         pmac_pfunc_base_install();
 780         pmac_i2c_init();
 781
 782         /* Setup various bits like timebase sync method, ability to nap, ... */
 783         smp_core99_setup(ncpus);
 784
 785         /* Install IPIs */
 786         mpic_request_ipis();
 787
 788         /* Collect l2cr and l3cr values from CPU 0 */
 789         core99_init_caches(0);
 790
 791         return ncpus;
 792 }
 793
 794 static void __devinit smp_core99_kick_cpu(int nr)
 795 {
 796         unsigned int save_vector;
 797         unsigned long target, flags;
 798         unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
 799
 800         if (nr < 0 || nr > 3)
 801                 return;
 802
 803         if (ppc_md.progress)
 804                 ppc_md.progress("smp_core99_kick_cpu", 0x346);
 805
 806         local_irq_save(flags);
 807
 808         /* Save reset vector */
 809         save_vector = *vector;
 810
 811         /* Setup fake reset vector that does
 812          *   b __secondary_start_pmac_0 + nr*8
 813          */
 814         target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
 815         patch_branch(vector, target, BRANCH_SET_LINK);
 816
 817         /* Put some life in our friend */
 818         pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
 819
 820         /* FIXME: We wait a bit for the CPU to take the exception, I should
 821          * instead wait for the entry code to set something for me. Well,
 822          * ideally, all that crap will be done in prom.c and the CPU left
 823          * in a RAM-based wait loop like CHRP.
 824          */
 825         mdelay(1);
 826
 827         /* Restore our exception vector */
 828         *vector = save_vector;
 829         flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
 830
 831         local_irq_restore(flags);
 832         if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
 833 }
 834
 835 static void __devinit smp_core99_setup_cpu(int cpu_nr)
 836 {
 837         /* Setup L2/L3 */
 838         if (cpu_nr != 0)
 839                 core99_init_caches(cpu_nr);
 840
 841         /* Setup openpic */
 842         mpic_setup_this_cpu();
 843 }
 844
 845 #ifdef CONFIG_PPC64
 846 #ifdef CONFIG_HOTPLUG_CPU
 847 static int smp_core99_cpu_notify(struct notifier_block *self,
 848                                  unsigned long action, void *hcpu)
 849 {
 850         int rc;
 851
 852         switch(action) {
 853         case CPU_UP_PREPARE:
 854         case CPU_UP_PREPARE_FROZEN:
 855                 /* Open i2c bus if it was used for tb sync */
 856                 if (pmac_tb_clock_chip_host) {
 857                         rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
 858                         if (rc) {
 859                                 pr_err("Failed to open i2c bus for time sync\n");
 860                                 return notifier_from_errno(rc);
 861                         }
 862                 }
 863                 break;
 864         case CPU_ONLINE:
 865         case CPU_UP_CANCELED:
 866                 /* Close i2c bus if it was used for tb sync */
 867                 if (pmac_tb_clock_chip_host)
 868                         pmac_i2c_close(pmac_tb_clock_chip_host);
 869                 break;
 870         default:
 871                 break;
 872         }
 873         return NOTIFY_OK;
 874 }
 875
 876 static struct notifier_block __cpuinitdata smp_core99_cpu_nb = {
 877         .notifier_call  = smp_core99_cpu_notify,
 878 };
 879 #endif /* CONFIG_HOTPLUG_CPU */
 880
 881 static void __init smp_core99_bringup_done(void)
 882 {
 883         extern void g5_phy_disable_cpu1(void);
 884
 885         /* Close i2c bus if it was used for tb sync */
 886         if (pmac_tb_clock_chip_host)
 887                 pmac_i2c_close(pmac_tb_clock_chip_host);
 888
 889         /* If we didn't start the second CPU, we must take
 890          * it off the bus.
 891          */
 892         if (of_machine_is_compatible("MacRISC4") &&
 893             num_online_cpus() < 2) {
 894                 set_cpu_present(1, false);
 895                 g5_phy_disable_cpu1();
 896         }
 897 #ifdef CONFIG_HOTPLUG_CPU
 898         register_cpu_notifier(&smp_core99_cpu_nb);
 899 #endif
 900
 901         if (ppc_md.progress)
 902                 ppc_md.progress("smp_core99_bringup_done", 0x349);
 903 }
 904 #endif /* CONFIG_PPC64 */
 905
 906 #ifdef CONFIG_HOTPLUG_CPU
 907
 908 static int smp_core99_cpu_disable(void)
 909 {
 910         int rc = generic_cpu_disable();
 911         if (rc)
 912                 return rc;
 913
 914         mpic_cpu_set_priority(0xf);
 915
 916         return 0;
 917 }
 918
 919 #ifdef CONFIG_PPC32
 920
 921 static void pmac_cpu_die(void)
 922 {
 923         int cpu = smp_processor_id();
 924
 925         local_irq_disable();
 926         idle_task_exit();
 927         pr_debug("CPU%d offline\n", cpu);
 928         generic_set_cpu_dead(cpu);
 929         smp_wmb();
 930         mb();
 931         low_cpu_die();
 932 }
 933
 934 #else /* CONFIG_PPC32 */
 935
 936 static void pmac_cpu_die(void)
 937 {
 938         int cpu = smp_processor_id();
 939
 940         local_irq_disable();
 941         idle_task_exit();
 942
 943         /*
 944          * turn off as much as possible, we'll be
 945          * kicked out as this will only be invoked
 946          * on core99 platforms for now ...
 947          */
 948
 949         printk(KERN_INFO "CPU#%d offline\n", cpu);
 950         generic_set_cpu_dead(cpu);
 951         smp_wmb();
 952
 953         /*
 954          * Re-enable interrupts. The NAP code needs to enable them
 955          * anyways, do it now so we deal with the case where one already
 956          * happened while soft-disabled.
 957          * We shouldn't get any external interrupts, only decrementer, and the
 958          * decrementer handler is safe for use on offline CPUs
 959          */
 960         local_irq_enable();
 961
 962         while (1) {
 963                 /* let's not take timer interrupts too often ... */
 964                 set_dec(0x7fffffff);
 965
 966                 /* Enter NAP mode */
 967                 power4_idle();
 968         }
 969 }
 970
 971 #endif /* else CONFIG_PPC32 */
 972 #endif /* CONFIG_HOTPLUG_CPU */
 973
 974 /* Core99 Macs (dual G4s and G5s) */
 975 struct smp_ops_t core99_smp_ops = {
 976         .message_pass   = smp_mpic_message_pass,
 977         .probe          = smp_core99_probe,
 978 #ifdef CONFIG_PPC64
 979         .bringup_done   = smp_core99_bringup_done,
 980 #endif
 981         .kick_cpu       = smp_core99_kick_cpu,
 982         .setup_cpu      = smp_core99_setup_cpu,
 983         .give_timebase  = smp_core99_give_timebase,
 984         .take_timebase  = smp_core99_take_timebase,
 985 #if defined(CONFIG_HOTPLUG_CPU)
 986         .cpu_disable    = smp_core99_cpu_disable,
 987         .cpu_die        = generic_cpu_die,
 988 #endif
 989 };
 990
 991 void __init pmac_setup_smp(void)
 992 {
 993         struct device_node *np;
 994
 995         /* Check for Core99 */
 996         np = of_find_node_by_name(NULL, "uni-n");
 997         if (!np)
 998                 np = of_find_node_by_name(NULL, "u3");
 999         if (!np)
1000                 np = of_find_node_by_name(NULL, "u4");
1001         if (np) {
1002                 of_node_put(np);
1003                 smp_ops = &core99_smp_ops;
1004         }
1005 #ifdef CONFIG_PPC32
1006         else {
1007                 /* We have to set bits in cpu_possible_mask here since the
1008                  * secondary CPU(s) aren't in the device tree. Various
1009                  * things won't be initialized for CPUs not in the possible
1010                  * map, so we really need to fix it up here.
1011                  */
1012                 int cpu;
1013
1014                 for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
1015                         set_cpu_possible(cpu, true);
1016                 smp_ops = &psurge_smp_ops;
1017         }
1018 #endif /* CONFIG_PPC32 */
1019
1020 #ifdef CONFIG_HOTPLUG_CPU
1021         ppc_md.cpu_die = pmac_cpu_die;
1022 #endif
1023 }
1024
1025