arch/powerpc/dts/t2080.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
   4  *
   5  * Copyright 2013 Freescale Semiconductor Inc.
   6  * Copyright 2018 NXP
   7  */
   8
   9 /dts-v1/;
  10
  11 /include/ "e6500_power_isa.dtsi"
  12
  13 / {
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16         interrupt-parent = <&mpic>;
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 cpu0: PowerPC,e6500@0 {
  23                         device_type = "cpu";
  24                         reg = <0 1>;
  25                         fsl,portid-mapping = <0x80000000>;
  26                 };
  27                 cpu1: PowerPC,e6500@2 {
  28                         device_type = "cpu";
  29                         reg = <2 3>;
  30                         fsl,portid-mapping = <0x80000000>;
  31                 };
  32                 cpu2: PowerPC,e6500@4 {
  33                         device_type = "cpu";
  34                         reg = <4 5>;
  35                         fsl,portid-mapping = <0x80000000>;
  36                 };
  37                 cpu3: PowerPC,e6500@6 {
  38                         device_type = "cpu";
  39                         reg = <6 7>;
  40                         fsl,portid-mapping = <0x80000000>;
  41                 };
  42         };
  43
  44         soc: soc@ffe000000 {
  45                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  46                 reg = <0xf 0xfe000000 0 0x00001000>;
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 device_type = "soc";
  50                 compatible = "simple-bus";
  51
  52                 mpic: pic@40000 {
  53                         interrupt-controller;
  54                         #address-cells = <0>;
  55                         #interrupt-cells = <4>;
  56                         reg = <0x40000 0x40000>;
  57                         compatible = "fsl,mpic";
  58                         device_type = "open-pic";
  59                         clock-frequency = <0x0>;
  60                 };
  61
  62                 esdhc: esdhc@114000 {
  63                         compatible = "fsl,esdhc";
  64                         reg = <0x114000 0x1000>;
  65                         interrupts = <48 2 0 0>;
  66                         clock-frequency = <0>;
  67                         sdhci,auto-cmd12;
  68                         bus-width = <4>;
  69                         voltage-ranges = <1800 1800 3300 3300>;
  70                 };
  71
  72                 usb0: usb@210000 {
  73                         compatible = "fsl-usb2-mph";
  74                         reg = <0x210000 0x1000>;
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77                         interrupts = <44 0x2 0 0>;
  78                         phy_type = "utmi";
  79                 };
  80
  81                 usb1: usb@211000 {
  82                         compatible = "fsl-usb2-dr";
  83                         reg = <0x211000 0x1000>;
  84                         #address-cells = <1>;
  85                         #size-cells = <0>;
  86                         interrupts = <45 0x2 0 0>;
  87                         dr_mode = "host";
  88                         phy_type = "utmi";
  89                 };
  90
  91                 sata0: sata@220000 {
  92                         compatible = "fsl,pq-sata-v2";
  93                         reg = <0x220000 0x1000>;
  94                         interrupts = <68 0x2 0 0>;
  95                         sata-number = <0x0>;
  96                         sata-fpdma = <0x0>;
  97                 };
  98
  99                 sata1: sata@221000 {
 100                         compatible = "fsl,pq-sata-v2";
 101                         reg = <0x221000 0x1000>;
 102                         interrupts = <69 0x2 0 0>;
 103                         sata-number = <0x0>;
 104                         sata-fpdma = <0x0>;
 105                 };
 106         };
 107 };