arch/powerpc/cpu/ppc4xx/sdram.c

   1 /*
   2  * (C) Copyright 2005-2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * (C) Copyright 2006
   6  * DAVE Srl <www.dave-tech.it>
   7  *
   8  * (C) Copyright 2002-2004
   9  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #include <common.h>
  31 #include <asm/ppc4xx.h>
  32 #include <asm/processor.h>
  33 #include "sdram.h"
  34 #include "ecc.h"
  35
  36 #ifdef CONFIG_SDRAM_BANK0
  37
  38 #ifndef CONFIG_440
  39
  40 #ifndef CONFIG_SYS_SDRAM_TABLE
  41 sdram_conf_t mb0cf[] = {
  42         {(128 << 20), 13, 0x000A4001},      /* (0-128MB) Address Mode 3, 13x10(4) */
  43         {(64 << 20),  13, 0x00084001},      /* (0-64MB) Address Mode 3, 13x9(4)   */
  44         {(32 << 20),  12, 0x00062001},      /* (0-32MB) Address Mode 2, 12x9(4)   */
  45         {(16 << 20),  12, 0x00046001},      /* (0-16MB) Address Mode 4, 12x8(4)   */
  46         {(4 << 20),   11, 0x00008001},      /* (0-4MB) Address Mode 5, 11x8(2)    */
  47 };
  48 #else
  49 sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
  50 #endif
  51
  52 #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
  53
  54 #ifdef CONFIG_SYS_SDRAM_CASL
  55 static ulong ns2clks(ulong ns)
  56 {
  57         ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
  58
  59         return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
  60 }
  61 #endif /* CONFIG_SYS_SDRAM_CASL */
  62
  63 static ulong compute_sdtr1(ulong speed)
  64 {
  65 #ifdef CONFIG_SYS_SDRAM_CASL
  66         ulong tmp;
  67         ulong sdtr1 = 0;
  68
  69         /* CASL */
  70         if (CONFIG_SYS_SDRAM_CASL < 2)
  71                 sdtr1 |= (1 << SDRAM0_TR_CASL);
  72         else
  73                 if (CONFIG_SYS_SDRAM_CASL > 4)
  74                         sdtr1 |= (3 << SDRAM0_TR_CASL);
  75                 else
  76                         sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
  77
  78         /* PTA */
  79         tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
  80         if ((tmp >= 2) && (tmp <= 4))
  81                 sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
  82         else
  83                 sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
  84
  85         /* CTP */
  86         tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
  87         if ((tmp >= 2) && (tmp <= 4))
  88                 sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
  89         else
  90                 sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
  91
  92         /* LDF */
  93         tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
  94         if ((tmp >= 2) && (tmp <= 4))
  95                 sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
  96         else
  97                 sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
  98
  99         /* RFTA */
 100         tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
 101         if ((tmp >= 4) && (tmp <= 10))
 102                 sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
 103         else
 104                 sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
 105
 106         /* RCD */
 107         tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
 108         if ((tmp >= 2) && (tmp <= 4))
 109                 sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
 110         else
 111                 sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
 112
 113         return sdtr1;
 114 #else /* CONFIG_SYS_SDRAM_CASL */
 115         /*
 116          * If no values are configured in the board config file
 117          * use the default values, which seem to be ok for most
 118          * boards.
 119          *
 120          * REMARK:
 121          * For new board ports we strongly recommend to define the
 122          * correct values for the used SDRAM chips in your board
 123          * config file (see PPChameleonEVB.h)
 124          */
 125         if (speed > 100000000) {
 126                 /*
 127                  * 133 MHz SDRAM
 128                  */
 129                 return 0x01074015;
 130         } else {
 131                 /*
 132                  * default: 100 MHz SDRAM
 133                  */
 134                 return 0x0086400d;
 135         }
 136 #endif /* CONFIG_SYS_SDRAM_CASL */
 137 }
 138
 139 /* refresh is expressed in ms */
 140 static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
 141 {
 142 #ifdef CONFIG_SYS_SDRAM_CASL
 143         ulong tmp;
 144
 145         tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
 146         tmp /= 1000000;
 147
 148         return ((tmp & 0x00003FF8) << 16);
 149 #else /* CONFIG_SYS_SDRAM_CASL */
 150         if (speed > 100000000) {
 151                 /*
 152                  * 133 MHz SDRAM
 153                  */
 154                 return 0x07f00000;
 155         } else {
 156                 /*
 157                  * default: 100 MHz SDRAM
 158                  */
 159                 return 0x05f00000;
 160         }
 161 #endif /* CONFIG_SYS_SDRAM_CASL */
 162 }
 163
 164 /*
 165  * Autodetect onboard SDRAM on 405 platforms
 166  */
 167 phys_size_t initdram(int board_type)
 168 {
 169         ulong speed;
 170         ulong sdtr1;
 171         int i;
 172
 173         /*
 174          * Determine SDRAM speed
 175          */
 176         speed = get_bus_freq(0); /* parameter not used on ppc4xx */
 177
 178         /*
 179          * sdtr1 (register SDRAM0_TR) must take into account timings listed
 180          * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
 181          * account actual SDRAM size. So we can set up sdtr1 according to what
 182          * is specified in board configuration file while rtr dependds on SDRAM
 183          * size we are assuming before detection.
 184          */
 185         sdtr1 = compute_sdtr1(speed);
 186
 187         for (i=0; i<N_MB0CF; i++) {
 188                 /*
 189                  * Disable memory controller.
 190                  */
 191                 mtsdram(SDRAM0_CFG, 0x00000000);
 192
 193                 /*
 194                  * Set MB0CF for bank 0.
 195                  */
 196                 mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
 197                 mtsdram(SDRAM0_TR, sdtr1);
 198                 mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
 199
 200                 udelay(200);
 201
 202                 /*
 203                  * Set memory controller options reg, MCOPT1.
 204                  * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
 205                  * read/prefetch.
 206                  */
 207                 mtsdram(SDRAM0_CFG, 0x80800000);
 208
 209                 udelay(10000);
 210
 211                 if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
 212                         phys_size_t size = mb0cf[i].size;
 213
 214                         /*
 215                          * OK, size detected.  Enable second bank if
 216                          * defined (assumes same type as bank 0)
 217                          */
 218 #ifdef CONFIG_SDRAM_BANK1
 219                         mtsdram(SDRAM0_CFG, 0x00000000);
 220                         mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
 221                         mtsdram(SDRAM0_CFG, 0x80800000);
 222                         udelay(10000);
 223
 224                         /*
 225                          * Check if 2nd bank is really available.
 226                          * If the size not equal to the size of the first
 227                          * bank, then disable the 2nd bank completely.
 228                          */
 229                         if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
 230                             mb0cf[i].size) {
 231                                 mtsdram(SDRAM0_B1CR, 0);
 232                                 mtsdram(SDRAM0_CFG, 0);
 233                         } else {
 234                                 /*
 235                                  * We have two identical banks, so the size
 236                                  * is twice the bank size
 237                                  */
 238                                 size = 2 * size;
 239                         }
 240 #endif
 241
 242                         /*
 243                          * OK, size detected -> all done
 244                          */
 245                         return size;
 246                 }
 247         }
 248
 249         return 0;
 250 }
 251
 252 #else /* CONFIG_440 */
 253
 254 /*
 255  * Define some default values. Those can be overwritten in the
 256  * board config file.
 257  */
 258
 259 #ifndef CONFIG_SYS_SDRAM_TABLE
 260 sdram_conf_t mb0cf[] = {
 261         {(256 << 20), 13, 0x000C4001},  /* 256MB mode 3, 13x10(4)       */
 262         {(128 << 20), 13, 0x000A4001},  /* 128MB mode 3, 13x10(4)       */
 263         {(64 << 20),  12, 0x00082001}   /* 64MB mode 2, 12x9(4)         */
 264 };
 265 #else
 266 sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
 267 #endif
 268
 269 #ifndef CONFIG_SYS_SDRAM0_TR0
 270 #define CONFIG_SYS_SDRAM0_TR0           0x41094012
 271 #endif
 272
 273 #ifndef CONFIG_SYS_SDRAM0_WDDCTR
 274 #define CONFIG_SYS_SDRAM0_WDDCTR        0x00000000  /* wrcp=0 dcd=0     */
 275 #endif
 276
 277 #ifndef CONFIG_SYS_SDRAM0_RTR
 278 #define CONFIG_SYS_SDRAM0_RTR           0x04100000 /* 7.8us @ 133MHz PLB */
 279 #endif
 280
 281 #ifndef CONFIG_SYS_SDRAM0_CFG0
 282 #define CONFIG_SYS_SDRAM0_CFG0          0x82000000 /* DCEN=1, PMUD=0, 64-bit */
 283 #endif
 284
 285 #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
 286
 287 #define NUM_TRIES 64
 288 #define NUM_READS 10
 289
 290 static void sdram_tr1_set(int ram_address, int* tr1_value)
 291 {
 292         int i;
 293         int j, k;
 294         volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
 295         int first_good = -1, last_bad = 0x1ff;
 296
 297         unsigned long test[NUM_TRIES] = {
 298                 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
 299                 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
 300                 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
 301                 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
 302                 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
 303                 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
 304                 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
 305                 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
 306                 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
 307                 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
 308                 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
 309                 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
 310                 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
 311                 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
 312                 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
 313                 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
 314
 315         /* go through all possible SDRAM0_TR1[RDCT] values */
 316         for (i=0; i<=0x1ff; i++) {
 317                 /* set the current value for TR1 */
 318                 mtsdram(SDRAM0_TR1, (0x80800800 | i));
 319
 320                 /* write values */
 321                 for (j=0; j<NUM_TRIES; j++) {
 322                         ram_pointer[j] = test[j];
 323
 324                         /* clear any cache at ram location */
 325                         __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
 326                 }
 327
 328                 /* read values back */
 329                 for (j=0; j<NUM_TRIES; j++) {
 330                         for (k=0; k<NUM_READS; k++) {
 331                                 /* clear any cache at ram location */
 332                                 __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
 333
 334                                 if (ram_pointer[j] != test[j])
 335                                         break;
 336                         }
 337
 338                         /* read error */
 339                         if (k != NUM_READS)
 340                                 break;
 341                 }
 342
 343                 /* we have a SDRAM0_TR1[RDCT] that is part of the window */
 344                 if (j == NUM_TRIES) {
 345                         if (first_good == -1)
 346                                 first_good = i;         /* found beginning of window */
 347                 } else { /* bad read */
 348                         /* if we have not had a good read then don't care */
 349                         if (first_good != -1) {
 350                                 /* first failure after a good read */
 351                                 last_bad = i-1;
 352                                 break;
 353                         }
 354                 }
 355         }
 356
 357         /* return the current value for TR1 */
 358         *tr1_value = (first_good + last_bad) / 2;
 359 }
 360
 361 /*
 362  * Autodetect onboard DDR SDRAM on 440 platforms
 363  *
 364  * NOTE: Some of the hardcoded values are hardware dependant,
 365  *       so this should be extended for other future boards
 366  *       using this routine!
 367  */
 368 phys_size_t initdram(int board_type)
 369 {
 370         int i;
 371         int tr1_bank1;
 372
 373 #if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
 374     defined(CONFIG_440GR) || defined(CONFIG_440SP)
 375         /*
 376          * Soft-reset SDRAM controller.
 377          */
 378         mtsdr(SDR0_SRST, SDR0_SRST_DMC);
 379         mtsdr(SDR0_SRST, 0x00000000);
 380 #endif
 381
 382         for (i=0; i<N_MB0CF; i++) {
 383                 /*
 384                  * Disable memory controller.
 385                  */
 386                 mtsdram(SDRAM0_CFG0, 0x00000000);
 387
 388                 /*
 389                  * Setup some default
 390                  */
 391                 mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default)          */
 392                 mtsdram(SDRAM0_SLIO, 0x00000000);       /* rdre=0 wrre=0 rarw=0         */
 393                 mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal)              */
 394                 mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
 395                 mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
 396
 397                 /*
 398                  * Following for CAS Latency = 2.5 @ 133 MHz PLB
 399                  */
 400                 mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
 401                 mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
 402                 mtsdram(SDRAM0_TR1, 0x80800800);        /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
 403                 mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
 404                 mtsdram(SDRAM0_CFG1, 0x00000000);       /* Self-refresh exit, disable PM*/
 405                 udelay(400);                    /* Delay 200 usecs (min)        */
 406
 407                 /*
 408                  * Enable the controller, then wait for DCEN to complete
 409                  */
 410                 mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
 411                 udelay(10000);
 412
 413                 if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
 414                         phys_size_t size = mb0cf[i].size;
 415                         /*
 416                          * Optimize TR1 to current hardware environment
 417                          */
 418                         sdram_tr1_set(0x00000000, &tr1_bank1);
 419                         mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
 420
 421
 422                         /*
 423                          * OK, size detected.  Enable second bank if
 424                          * defined (assumes same type as bank 0)
 425                          */
 426 #ifdef CONFIG_SDRAM_BANK1
 427                         mtsdram(SDRAM0_CFG0, 0);
 428                         mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
 429                         mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
 430                         udelay(10000);
 431
 432                         /*
 433                          * Check if 2nd bank is really available.
 434                          * If the size not equal to the size of the first
 435                          * bank, then disable the 2nd bank completely.
 436                          */
 437                         if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
 438                             != mb0cf[i].size) {
 439                                 mtsdram(SDRAM0_CFG0, 0);
 440                                 mtsdram(SDRAM0_B1CR, 0);
 441                                 mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
 442                                 udelay(10000);
 443                         } else {
 444                                 /*
 445                                  * We have two identical banks, so the size
 446                                  * is twice the bank size
 447                                  */
 448                                 size = 2 * size;
 449                         }
 450 #endif
 451
 452 #ifdef CONFIG_SDRAM_ECC
 453                         ecc_init(0, size);
 454 #endif
 455
 456                         /*
 457                          * OK, size detected -> all done
 458                          */
 459                         return size;
 460                 }
 461         }
 462
 463         return 0;                               /* nothing found !              */
 464 }
 465
 466 #endif /* CONFIG_440 */
 467
 468 #endif /* CONFIG_SDRAM_BANK0 */