arch/powerpc/cpu/mpc85xx/fdt.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2007-2011 Freescale Semiconductor, Inc.
   4  *
   5  * (C) Copyright 2000
   6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   7  */
   8
   9 #include <common.h>
  10 #include <environment.h>
  11 #include <linux/libfdt.h>
  12 #include <fdt_support.h>
  13 #include <asm/processor.h>
  14 #include <linux/ctype.h>
  15 #include <asm/io.h>
  16 #include <asm/fsl_fdt.h>
  17 #include <asm/fsl_portals.h>
  18 #include <fsl_qbman.h>
  19 #include <hwconfig.h>
  20 #ifdef CONFIG_FSL_ESDHC
  21 #include <fsl_esdhc.h>
  22 #endif
  23 #ifdef CONFIG_SYS_DPAA_FMAN
  24 #include <fsl_fman.h>
  25 #endif
  26
  27 DECLARE_GLOBAL_DATA_PTR;
  28
  29 extern void ft_qe_setup(void *blob);
  30 extern void ft_fixup_num_cores(void *blob);
  31 extern void ft_srio_setup(void *blob);
  32
  33 #ifdef CONFIG_MP
  34 #include "mp.h"
  35
  36 void ft_fixup_cpu(void *blob, u64 memory_limit)
  37 {
  38         int off;
  39         phys_addr_t spin_tbl_addr = get_spin_phys_addr();
  40         u32 bootpg = determine_mp_bootpg(NULL);
  41         u32 id = get_my_id();
  42         const char *enable_method;
  43 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
  44         int ret;
  45         int tdm_hwconfig_enabled = 0;
  46         char buffer[HWCONFIG_BUFFER_SIZE] = {0};
  47 #endif
  48
  49         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
  50         while (off != -FDT_ERR_NOTFOUND) {
  51                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
  52
  53                 if (reg) {
  54                         u32 phys_cpu_id = thread_to_core(*reg);
  55                         u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
  56                         val = cpu_to_fdt64(val);
  57                         if (*reg == id) {
  58                                 fdt_setprop_string(blob, off, "status",
  59                                                                 "okay");
  60                         } else {
  61                                 fdt_setprop_string(blob, off, "status",
  62                                                                 "disabled");
  63                         }
  64
  65                         if (hold_cores_in_reset(0)) {
  66 #ifdef CONFIG_FSL_CORENET
  67                                 /* Cores held in reset, use BRR to release */
  68                                 enable_method = "fsl,brr-holdoff";
  69 #else
  70                                 /* Cores held in reset, use EEBPCR to release */
  71                                 enable_method = "fsl,eebpcr-holdoff";
  72 #endif
  73                         } else {
  74                                 /* Cores out of reset and in a spin-loop */
  75                                 enable_method = "spin-table";
  76
  77                                 fdt_setprop(blob, off, "cpu-release-addr",
  78                                                 &val, sizeof(val));
  79                         }
  80
  81                         fdt_setprop_string(blob, off, "enable-method",
  82                                                         enable_method);
  83                 } else {
  84                         printf ("cpu NULL\n");
  85                 }
  86                 off = fdt_node_offset_by_prop_value(blob, off,
  87                                 "device_type", "cpu", 4);
  88         }
  89
  90 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
  91 #define CONFIG_MEM_HOLE_16M     0x1000000
  92         /*
  93          * Extract hwconfig from environment.
  94          * Search for tdm entry in hwconfig.
  95          */
  96         ret = env_get_f("hwconfig", buffer, sizeof(buffer));
  97         if (ret > 0)
  98                 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
  99
 100         /* Reserve the memory hole created by TDM LAW, so OSes dont use it */
 101         if (tdm_hwconfig_enabled) {
 102                 off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE,
 103                                       CONFIG_MEM_HOLE_16M);
 104                 if (off < 0)
 105                         printf("Failed  to reserve memory for tdm: %s\n",
 106                                fdt_strerror(off));
 107         }
 108 #endif
 109
 110         /* Reserve the boot page so OSes dont use it */
 111         if ((u64)bootpg < memory_limit) {
 112                 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
 113                 if (off < 0)
 114                         printf("Failed to reserve memory for bootpg: %s\n",
 115                                 fdt_strerror(off));
 116         }
 117
 118 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR
 119         /*
 120          * Reserve the default boot page so OSes dont use it.
 121          * The default boot page is always mapped to bootpg above using
 122          * boot page translation.
 123          */
 124         if (0xfffff000ull < memory_limit) {
 125                 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
 126                 if (off < 0) {
 127                         printf("Failed to reserve memory for 0xfffff000: %s\n",
 128                                 fdt_strerror(off));
 129                 }
 130         }
 131 #endif
 132
 133         /* Reserve spin table page */
 134         if (spin_tbl_addr < memory_limit) {
 135                 off = fdt_add_mem_rsv(blob,
 136                         (spin_tbl_addr & ~0xffful), 4096);
 137                 if (off < 0)
 138                         printf("Failed to reserve memory for spin table: %s\n",
 139                                 fdt_strerror(off));
 140         }
 141 #ifdef CONFIG_DEEP_SLEEP
 142 #ifdef CONFIG_SPL_MMC_BOOT
 143         off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START,
 144                 CONFIG_SYS_MMC_U_BOOT_SIZE);
 145         if (off < 0)
 146                 printf("Failed to reserve memory for SD deep sleep: %s\n",
 147                        fdt_strerror(off));
 148 #elif defined(CONFIG_SPL_SPI_BOOT)
 149         off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START,
 150                 CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE);
 151         if (off < 0)
 152                 printf("Failed to reserve memory for SPI deep sleep: %s\n",
 153                        fdt_strerror(off));
 154 #endif
 155 #endif
 156 }
 157 #endif
 158
 159 #ifdef CONFIG_SYS_FSL_CPC
 160 static inline void ft_fixup_l3cache(void *blob, int off)
 161 {
 162         u32 line_size, num_ways, size, num_sets;
 163         cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
 164         u32 cfg0 = in_be32(&cpc->cpccfg0);
 165
 166         size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
 167         num_ways = CPC_CFG0_NUM_WAYS(cfg0);
 168         line_size = CPC_CFG0_LINE_SZ(cfg0);
 169         num_sets = size / (line_size * num_ways);
 170
 171         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 172         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 173         fdt_setprop_cell(blob, off, "cache-size", size);
 174         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 175         fdt_setprop_cell(blob, off, "cache-level", 3);
 176 #ifdef CONFIG_SYS_CACHE_STASHING
 177         fdt_setprop_cell(blob, off, "cache-stash-id", 1);
 178 #endif
 179 }
 180 #else
 181 #define ft_fixup_l3cache(x, y)
 182 #endif
 183
 184 #if defined(CONFIG_L2_CACHE) || \
 185         defined(CONFIG_BACKSIDE_L2_CACHE) || \
 186         defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 187 static inline void ft_fixup_l2cache_compatible(void *blob, int off)
 188 {
 189         int len;
 190         struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
 191
 192         if (cpu) {
 193                 char buf[40];
 194
 195                 if (isdigit(cpu->name[0])) {
 196                         /* MPCxxxx, where xxxx == 4-digit number */
 197                         len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
 198                                 cpu->name) + 1;
 199                 } else {
 200                         /* Pxxxx or Txxxx, where xxxx == 4-digit number */
 201                         len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
 202                         tolower(cpu->name[0]), cpu->name + 1) + 1;
 203                 }
 204
 205                 /*
 206                  * append "cache" after the NULL character that the previous
 207                  * sprintf wrote.  This is how a device tree stores multiple
 208                  * strings in a property.
 209                  */
 210                 len += sprintf(buf + len, "cache") + 1;
 211
 212                 fdt_setprop(blob, off, "compatible", buf, len);
 213         }
 214 }
 215 #endif
 216
 217 #if defined(CONFIG_L2_CACHE)
 218 /* return size in kilobytes */
 219 static inline u32 l2cache_size(void)
 220 {
 221         volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 222         volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
 223         u32 ver = SVR_SOC_VER(get_svr());
 224
 225         switch (l2siz_field) {
 226         case 0x0:
 227                 break;
 228         case 0x1:
 229                 if (ver == SVR_8540 || ver == SVR_8560   ||
 230                     ver == SVR_8541 || ver == SVR_8555)
 231                         return 128;
 232                 else
 233                         return 256;
 234                 break;
 235         case 0x2:
 236                 if (ver == SVR_8540 || ver == SVR_8560   ||
 237                     ver == SVR_8541 || ver == SVR_8555)
 238                         return 256;
 239                 else
 240                         return 512;
 241                 break;
 242         case 0x3:
 243                 return 1024;
 244                 break;
 245         }
 246
 247         return 0;
 248 }
 249
 250 static inline void ft_fixup_l2cache(void *blob)
 251 {
 252         int off;
 253         u32 *ph;
 254
 255         const u32 line_size = 32;
 256         const u32 num_ways = 8;
 257         const u32 size = l2cache_size() * 1024;
 258         const u32 num_sets = size / (line_size * num_ways);
 259
 260         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 261         if (off < 0) {
 262                 debug("no cpu node fount\n");
 263                 return;
 264         }
 265
 266         ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 267
 268         if (ph == NULL) {
 269                 debug("no next-level-cache property\n");
 270                 return ;
 271         }
 272
 273         off = fdt_node_offset_by_phandle(blob, *ph);
 274         if (off < 0) {
 275                 printf("%s: %s\n", __func__, fdt_strerror(off));
 276                 return ;
 277         }
 278
 279         ft_fixup_l2cache_compatible(blob, off);
 280         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 281         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 282         fdt_setprop_cell(blob, off, "cache-size", size);
 283         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 284         fdt_setprop_cell(blob, off, "cache-level", 2);
 285
 286         /* we dont bother w/L3 since no platform of this type has one */
 287 }
 288 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
 289         defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 290 static inline void ft_fixup_l2cache(void *blob)
 291 {
 292         int off, l2_off, l3_off = -1;
 293         u32 *ph;
 294 #ifdef  CONFIG_BACKSIDE_L2_CACHE
 295         u32 l2cfg0 = mfspr(SPRN_L2CFG0);
 296 #else
 297         struct ccsr_cluster_l2 *l2cache =
 298                 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
 299         u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
 300 #endif
 301         u32 size, line_size, num_ways, num_sets;
 302         int has_l2 = 1;
 303
 304         /* P2040/P2040E has no L2, so dont set any L2 props */
 305         if (SVR_SOC_VER(get_svr()) == SVR_P2040)
 306                 has_l2 = 0;
 307
 308         size = (l2cfg0 & 0x3fff) * 64 * 1024;
 309         num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
 310         line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
 311         num_sets = size / (line_size * num_ways);
 312
 313         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 314
 315         while (off != -FDT_ERR_NOTFOUND) {
 316                 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 317
 318                 if (ph == NULL) {
 319                         debug("no next-level-cache property\n");
 320                         goto next;
 321                 }
 322
 323                 l2_off = fdt_node_offset_by_phandle(blob, *ph);
 324                 if (l2_off < 0) {
 325                         printf("%s: %s\n", __func__, fdt_strerror(off));
 326                         goto next;
 327                 }
 328
 329                 if (has_l2) {
 330 #ifdef CONFIG_SYS_CACHE_STASHING
 331                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 332 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 333                         /* Only initialize every eighth thread */
 334                         if (reg && !((*reg) % 8)) {
 335                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 336                                                  (*reg / 4) + 32 + 1);
 337                         }
 338 #else
 339                         if (reg) {
 340                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 341                                                  (*reg * 2) + 32 + 1);
 342                         }
 343 #endif
 344 #endif
 345
 346                         fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
 347                         fdt_setprop_cell(blob, l2_off, "cache-block-size",
 348                                                 line_size);
 349                         fdt_setprop_cell(blob, l2_off, "cache-size", size);
 350                         fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
 351                         fdt_setprop_cell(blob, l2_off, "cache-level", 2);
 352                         ft_fixup_l2cache_compatible(blob, l2_off);
 353                 }
 354
 355                 if (l3_off < 0) {
 356                         ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
 357
 358                         if (ph == NULL) {
 359                                 debug("no next-level-cache property\n");
 360                                 goto next;
 361                         }
 362                         l3_off = *ph;
 363                 }
 364 next:
 365                 off = fdt_node_offset_by_prop_value(blob, off,
 366                                 "device_type", "cpu", 4);
 367         }
 368         if (l3_off > 0) {
 369                 l3_off = fdt_node_offset_by_phandle(blob, l3_off);
 370                 if (l3_off < 0) {
 371                         printf("%s: %s\n", __func__, fdt_strerror(off));
 372                         return ;
 373                 }
 374                 ft_fixup_l3cache(blob, l3_off);
 375         }
 376 }
 377 #else
 378 #define ft_fixup_l2cache(x)
 379 #endif
 380
 381 static inline void ft_fixup_cache(void *blob)
 382 {
 383         int off;
 384
 385         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 386
 387         while (off != -FDT_ERR_NOTFOUND) {
 388                 u32 l1cfg0 = mfspr(SPRN_L1CFG0);
 389                 u32 l1cfg1 = mfspr(SPRN_L1CFG1);
 390                 u32 isize, iline_size, inum_sets, inum_ways;
 391                 u32 dsize, dline_size, dnum_sets, dnum_ways;
 392
 393                 /* d-side config */
 394                 dsize = (l1cfg0 & 0x7ff) * 1024;
 395                 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
 396                 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
 397                 dnum_sets = dsize / (dline_size * dnum_ways);
 398
 399                 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
 400                 fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 401                 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 402
 403 #ifdef CONFIG_SYS_CACHE_STASHING
 404                 {
 405                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 406                         if (reg)
 407                                 fdt_setprop_cell(blob, off, "cache-stash-id",
 408                                          (*reg * 2) + 32 + 0);
 409                 }
 410 #endif
 411
 412                 /* i-side config */
 413                 isize = (l1cfg1 & 0x7ff) * 1024;
 414                 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
 415                 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
 416                 inum_sets = isize / (iline_size * inum_ways);
 417
 418                 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
 419                 fdt_setprop_cell(blob, off, "i-cache-size", isize);
 420                 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 421
 422                 off = fdt_node_offset_by_prop_value(blob, off,
 423                                 "device_type", "cpu", 4);
 424         }
 425
 426         ft_fixup_l2cache(blob);
 427 }
 428
 429
 430 void fdt_add_enet_stashing(void *fdt)
 431 {
 432         do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
 433
 434         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
 435
 436         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
 437         do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
 438         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
 439         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
 440 }
 441
 442 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
 443 #ifdef CONFIG_SYS_DPAA_FMAN
 444 static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
 445                           unsigned long freq)
 446 {
 447         phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
 448         int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
 449
 450         if (off >= 0) {
 451                 off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
 452                 if (off > 0)
 453                         printf("WARNING enable to set clock-frequency "
 454                                 "for %s: %s\n", compat, fdt_strerror(off));
 455         }
 456 }
 457 #endif
 458
 459 static void ft_fixup_dpaa_clks(void *blob)
 460 {
 461         sys_info_t sysinfo;
 462
 463         get_sys_info(&sysinfo);
 464 #ifdef CONFIG_SYS_DPAA_FMAN
 465         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
 466                         sysinfo.freq_fman[0]);
 467
 468 #if (CONFIG_SYS_NUM_FMAN == 2)
 469         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
 470                         sysinfo.freq_fman[1]);
 471 #endif
 472 #endif
 473
 474 #ifdef CONFIG_SYS_DPAA_QBMAN
 475         do_fixup_by_compat_u32(blob, "fsl,qman",
 476                         "clock-frequency", sysinfo.freq_qman, 1);
 477 #endif
 478
 479 #ifdef CONFIG_SYS_DPAA_PME
 480         do_fixup_by_compat_u32(blob, "fsl,pme",
 481                 "clock-frequency", sysinfo.freq_pme, 1);
 482 #endif
 483 }
 484 #else
 485 #define ft_fixup_dpaa_clks(x)
 486 #endif
 487
 488 #ifdef CONFIG_QE
 489 static void ft_fixup_qe_snum(void *blob)
 490 {
 491         unsigned int svr;
 492
 493         svr = mfspr(SPRN_SVR);
 494         if (SVR_SOC_VER(svr) == SVR_8569) {
 495                 if(IS_SVR_REV(svr, 1, 0))
 496                         do_fixup_by_compat_u32(blob, "fsl,qe",
 497                                 "fsl,qe-num-snums", 46, 1);
 498                 else
 499                         do_fixup_by_compat_u32(blob, "fsl,qe",
 500                                 "fsl,qe-num-snums", 76, 1);
 501         }
 502 }
 503 #endif
 504
 505 #if defined(CONFIG_ARCH_P4080)
 506 static void fdt_fixup_usb(void *fdt)
 507 {
 508         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 509         u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
 510         int off;
 511
 512         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
 513         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
 514                                 FSL_CORENET_RCWSR11_EC1_FM1_USB1)
 515                 fdt_status_disabled(fdt, off);
 516
 517         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
 518         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
 519                                 FSL_CORENET_RCWSR11_EC2_USB2)
 520                 fdt_status_disabled(fdt, off);
 521 }
 522 #else
 523 #define fdt_fixup_usb(x)
 524 #endif
 525
 526 #if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \
 527         defined(CONFIG_ARCH_T4160)
 528 void fdt_fixup_dma3(void *blob)
 529 {
 530         /* the 3rd DMA is not functional if SRIO2 is chosen */
 531         int nodeoff;
 532         ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 533
 534 #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
 535 #if defined(CONFIG_ARCH_T2080)
 536         u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
 537                                     FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 538         srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 539
 540         switch (srds_prtcl_s2) {
 541         case 0x29:
 542         case 0x2d:
 543         case 0x2e:
 544 #elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
 545         u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
 546                                     FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
 547         srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
 548
 549         switch (srds_prtcl_s4) {
 550         case 6:
 551         case 8:
 552         case 14:
 553         case 16:
 554 #endif
 555                 nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma",
 556                                                         CONFIG_SYS_ELO3_DMA3);
 557                 if (nodeoff > 0)
 558                         fdt_status_disabled(blob, nodeoff);
 559                 else
 560                         printf("WARNING: unable to disable dma3\n");
 561                 break;
 562         default:
 563                 break;
 564         }
 565 }
 566 #else
 567 #define fdt_fixup_dma3(x)
 568 #endif
 569
 570 #if defined(CONFIG_ARCH_T1040)
 571 static void fdt_fixup_l2_switch(void *blob)
 572 {
 573         uchar l2swaddr[6];
 574         int node;
 575
 576         /* The l2switch node from device-tree has
 577          * compatible string "vitesse-9953" */
 578         node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
 579         if (node == -FDT_ERR_NOTFOUND)
 580                 /* no l2switch node has been found */
 581                 return;
 582
 583         /* Get MAC address for the l2switch from "l2switchaddr"*/
 584         if (!eth_env_get_enetaddr("l2switchaddr", l2swaddr)) {
 585                 printf("Warning: MAC address for l2switch not found\n");
 586                 memset(l2swaddr, 0, sizeof(l2swaddr));
 587         }
 588
 589         /* Add MAC address to l2switch node */
 590         fdt_setprop(blob, node, "local-mac-address", l2swaddr,
 591                     sizeof(l2swaddr));
 592 }
 593 #else
 594 #define fdt_fixup_l2_switch(x)
 595 #endif
 596
 597 void ft_cpu_setup(void *blob, bd_t *bd)
 598 {
 599         int off;
 600         int val;
 601         int len;
 602         sys_info_t sysinfo;
 603
 604         /* delete crypto node if not on an E-processor */
 605         if (!IS_E_PROCESSOR(get_svr()))
 606                 fdt_fixup_crypto_node(blob, 0);
 607 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4
 608         else {
 609                 ccsr_sec_t __iomem *sec;
 610
 611                 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
 612                 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
 613         }
 614 #endif
 615
 616         fdt_add_enet_stashing(blob);
 617
 618 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
 619 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1
 620 #endif
 621         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 622                 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
 623                 1);
 624         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 625                 "bus-frequency", bd->bi_busfreq, 1);
 626         get_sys_info(&sysinfo);
 627         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 628         while (off != -FDT_ERR_NOTFOUND) {
 629                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
 630                 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
 631                 fdt_setprop(blob, off, "clock-frequency", &val, 4);
 632                 off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 633                                                         "cpu", 4);
 634         }
 635         do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 636                 "bus-frequency", bd->bi_busfreq, 1);
 637
 638 #ifdef CONFIG_QE
 639         ft_qe_setup(blob);
 640         ft_fixup_qe_snum(blob);
 641 #endif
 642
 643 #ifdef CONFIG_SYS_DPAA_FMAN
 644         fdt_fixup_fman_firmware(blob);
 645 #endif
 646
 647 #ifdef CONFIG_SYS_NS16550
 648         do_fixup_by_compat_u32(blob, "ns16550",
 649                 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 650 #endif
 651
 652 #ifdef CONFIG_CPM2
 653         do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
 654                 "current-speed", gd->baudrate, 1);
 655
 656         do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
 657                 "clock-frequency", bd->bi_brgfreq, 1);
 658 #endif
 659
 660 #ifdef CONFIG_FSL_CORENET
 661         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
 662                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 663         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
 664                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 665         do_fixup_by_compat_u32(blob, "fsl,mpic",
 666                 "clock-frequency", get_bus_freq(0)/2, 1);
 667 #else
 668         do_fixup_by_compat_u32(blob, "fsl,mpic",
 669                 "clock-frequency", get_bus_freq(0), 1);
 670 #endif
 671
 672         fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 673
 674 #ifdef CONFIG_MP
 675         ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
 676         ft_fixup_num_cores(blob);
 677 #endif
 678
 679         ft_fixup_cache(blob);
 680
 681 #if defined(CONFIG_FSL_ESDHC)
 682         fdt_fixup_esdhc(blob, bd);
 683 #endif
 684
 685         ft_fixup_dpaa_clks(blob);
 686
 687 #if defined(CONFIG_SYS_BMAN_MEM_PHYS)
 688         fdt_portal(blob, "fsl,bman-portal", "bman-portals",
 689                         (u64)CONFIG_SYS_BMAN_MEM_PHYS,
 690                         CONFIG_SYS_BMAN_MEM_SIZE);
 691         fdt_fixup_bportals(blob);
 692 #endif
 693
 694 #if defined(CONFIG_SYS_QMAN_MEM_PHYS)
 695         fdt_portal(blob, "fsl,qman-portal", "qman-portals",
 696                         (u64)CONFIG_SYS_QMAN_MEM_PHYS,
 697                         CONFIG_SYS_QMAN_MEM_SIZE);
 698
 699         fdt_fixup_qportals(blob);
 700 #endif
 701
 702 #ifdef CONFIG_SYS_SRIO
 703         ft_srio_setup(blob);
 704 #endif
 705
 706         /*
 707          * system-clock = CCB clock/2
 708          * Here gd->bus_clk = CCB clock
 709          * We are using the system clock as 1588 Timer reference
 710          * clock source select
 711          */
 712         do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
 713                         "timer-frequency", gd->bus_clk/2, 1);
 714
 715         /*
 716          * clock-freq should change to clock-frequency and
 717          * flexcan-v1.0 should change to p1010-flexcan respectively
 718          * in the future.
 719          */
 720         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 721                         "clock_freq", gd->bus_clk/2, 1);
 722
 723         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 724                         "clock-frequency", gd->bus_clk/2, 1);
 725
 726         do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
 727                         "clock-frequency", gd->bus_clk/2, 1);
 728
 729         fdt_fixup_usb(blob);
 730
 731         fdt_fixup_l2_switch(blob);
 732
 733         fdt_fixup_dma3(blob);
 734 }
 735
 736 /*
 737  * For some CCSR devices, we only have the virtual address, not the physical
 738  * address.  This is because we map CCSR as a whole, so we typically don't need
 739  * a macro for the physical address of any device within CCSR.  In this case,
 740  * we calculate the physical address of that device using it's the difference
 741  * between the virtual address of the device and the virtual address of the
 742  * beginning of CCSR.
 743  */
 744 #define CCSR_VIRT_TO_PHYS(x) \
 745         (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
 746
 747 static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
 748 {
 749         printf("Warning: U-Boot configured %s at address %llx,\n"
 750                "but the device tree has it at %llx\n", name, uaddr, daddr);
 751 }
 752
 753 /*
 754  * Verify the device tree
 755  *
 756  * This function compares several CONFIG_xxx macros that contain physical
 757  * addresses with the corresponding nodes in the device tree, to see if
 758  * the physical addresses are all correct.  For example, if
 759  * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
 760  * of the first UART.  We convert this to a physical address and compare
 761  * that with the physical address of the first ns16550-compatible node
 762  * in the device tree.  If they don't match, then we display a warning.
 763  *
 764  * Returns 1 on success, 0 on failure
 765  */
 766 int ft_verify_fdt(void *fdt)
 767 {
 768         uint64_t addr = 0;
 769         int aliases;
 770         int off;
 771
 772         /* First check the CCSR base address */
 773         off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
 774         if (off > 0) {
 775                 int size;
 776                 u32 naddr;
 777                 const fdt32_t *prop;
 778
 779                 naddr = fdt_address_cells(fdt, off);
 780                 prop = fdt_getprop(fdt, off, "ranges", &size);
 781                 addr = fdt_translate_address(fdt, off, prop + naddr);
 782         }
 783
 784         if (!addr) {
 785                 printf("Warning: could not determine base CCSR address in "
 786                        "device tree\n");
 787                 /* No point in checking anything else */
 788                 return 0;
 789         }
 790
 791         if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
 792                 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
 793                 /* No point in checking anything else */
 794                 return 0;
 795         }
 796
 797         /*
 798          * Check some nodes via aliases.  We assume that U-Boot and the device
 799          * tree enumerate the devices equally.  E.g. the first serial port in
 800          * U-Boot is the same as "serial0" in the device tree.
 801          */
 802         aliases = fdt_path_offset(fdt, "/aliases");
 803         if (aliases > 0) {
 804 #ifdef CONFIG_SYS_NS16550_COM1
 805                 if (!fdt_verify_alias_address(fdt, aliases, "serial0",
 806                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
 807                         return 0;
 808 #endif
 809
 810 #ifdef CONFIG_SYS_NS16550_COM2
 811                 if (!fdt_verify_alias_address(fdt, aliases, "serial1",
 812                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
 813                         return 0;
 814 #endif
 815         }
 816
 817         /*
 818          * The localbus node is typically a root node, even though the lbc
 819          * controller is part of CCSR.  If we were to put the lbc node under
 820          * the SOC node, then the 'ranges' property in the lbc node would
 821          * translate through the 'ranges' property of the parent SOC node, and
 822          * we don't want that.  Since it's a separate node, it's possible for
 823          * the 'reg' property to be wrong, so check it here.  For now, we
 824          * only check for "fsl,elbc" nodes.
 825          */
 826 #ifdef CONFIG_SYS_LBC_ADDR
 827         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
 828         if (off > 0) {
 829                 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
 830                 if (reg) {
 831                         uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
 832
 833                         addr = fdt_translate_address(fdt, off, reg);
 834                         if (uaddr != addr) {
 835                                 msg("the localbus", uaddr, addr);
 836                                 return 0;
 837                         }
 838                 }
 839         }
 840 #endif
 841
 842         return 1;
 843 }
 844
 845 void fdt_del_diu(void *blob)
 846 {
 847         int nodeoff = 0;
 848
 849         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 850                                 "fsl,diu")) >= 0) {
 851                 fdt_del_node(blob, nodeoff);
 852         }
 853 }