2 * Copyright 2007-2011 Freescale Semiconductor, Inc.
4 * (C) Copyright 2003 Motorola Inc.
5 * Modified by Xianghua Xiao, X.Xiao@motorola.com
8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 * See file CREDITS for list of people who contributed to this
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 #include <asm/processor.h>
36 #include <asm/cache.h>
38 #include <asm/fsl_law.h>
39 #include <asm/fsl_serdes.h>
41 #ifdef CONFIG_SYS_QE_FW_IN_NAND
46 DECLARE_GLOBAL_DATA_PTR;
48 extern void srio_init(void);
51 extern qe_iop_conf_t qe_iop_conf_tab[];
52 extern void qe_config_iopin(u8 port, u8 pin, int dir,
53 int open_drain, int assign);
54 extern void qe_init(uint qe_base);
55 extern void qe_reset(void);
57 static void config_qe_ioports(void)
60 int dir, open_drain, assign;
63 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
64 port = qe_iop_conf_tab[i].port;
65 pin = qe_iop_conf_tab[i].pin;
66 dir = qe_iop_conf_tab[i].dir;
67 open_drain = qe_iop_conf_tab[i].open_drain;
68 assign = qe_iop_conf_tab[i].assign;
69 qe_config_iopin(port, pin, dir, open_drain, assign);
75 void config_8560_ioports (volatile ccsr_cpm_t * cpm)
79 for (portnum = 0; portnum < 4; portnum++) {
86 iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
87 iop_conf_t *eiopc = iopc + 32;
92 * index 0 refers to pin 31,
93 * index 31 refers to pin 0
95 while (iopc < eiopc) {
115 volatile ioport_t *iop = ioport_addr (cpm, portnum);
119 * the (somewhat confused) paragraph at the
120 * bottom of page 35-5 warns that there might
121 * be "unknown behaviour" when programming
122 * PSORx and PDIRx, if PPARx = 1, so I
123 * decided this meant I had to disable the
124 * dedicated function first, and enable it
128 iop->psor = (iop->psor & tpmsk) | psor;
129 iop->podr = (iop->podr & tpmsk) | podr;
130 iop->pdat = (iop->pdat & tpmsk) | pdat;
131 iop->pdir = (iop->pdir & tpmsk) | pdir;
138 #ifdef CONFIG_SYS_FSL_CPC
139 static void enable_cpc(void)
144 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
146 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
147 u32 cpccfg0 = in_be32(&cpc->cpccfg0);
148 size += CPC_CFG0_SZ_K(cpccfg0);
149 #ifdef CONFIG_RAMBOOT_PBL
150 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
151 /* find and disable LAW of SRAM */
152 struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
154 if (law.index == -1) {
155 printf("\nFatal error happened\n");
158 disable_law(law.index);
160 clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
161 out_be32(&cpc->cpccsr0, 0);
162 out_be32(&cpc->cpcsrcr0, 0);
166 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
167 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
169 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
170 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
173 out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
174 /* Read back to sync write */
175 in_be32(&cpc->cpccsr0);
179 printf("Corenet Platform Cache: %d KB enabled\n", size);
182 void invalidate_cpc(void)
185 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
187 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
188 /* skip CPC when it used as all SRAM */
189 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
191 /* Flash invalidate the CPC and clear all the locks */
192 out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
193 while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
199 #define invalidate_cpc()
200 #endif /* CONFIG_SYS_FSL_CPC */
203 * Breathe some life into the CPU...
205 * Set up the memory map
206 * initialize a bunch of registers
209 #ifdef CONFIG_FSL_CORENET
210 static void corenet_tb_init(void)
212 volatile ccsr_rcpm_t *rcpm =
213 (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
214 volatile ccsr_pic_t *pic =
215 (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
216 u32 whoami = in_be32(&pic->whoami);
218 /* Enable the timebase register for this core */
219 out_be32(&rcpm->ctbenrl, (1 << whoami));
223 void cpu_init_f (void)
225 extern void m8560_cpm_reset (void);
226 #ifdef CONFIG_SYS_DCSRBAR_PHYS
227 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
229 #if defined(CONFIG_SECURE_BOOT)
230 struct law_entry law;
232 #ifdef CONFIG_MPC8548
233 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
234 uint svr = get_svr();
237 * CPU2 errata workaround: A core hang possible while executing
238 * a msync instruction and a snoopable transaction from an I/O
239 * master tagged to make quick forward progress is present.
240 * Fixed in silicon rev 2.1.
242 if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
243 out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
249 #if defined(CONFIG_SECURE_BOOT)
250 /* Disable the LAW created for NOR flash by the PBI commands */
251 law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
253 disable_law(law.index);
257 config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
260 init_early_memctl_regs();
262 #if defined(CONFIG_CPM2)
266 /* Config QE ioports */
269 #if defined(CONFIG_FSL_DMA)
272 #ifdef CONFIG_FSL_CORENET
275 init_used_tlb_cams();
277 /* Invalidate the CPC before DDR gets enabled */
280 #ifdef CONFIG_SYS_DCSRBAR_PHYS
281 /* set DCSRCR so that DCSR space is 1G */
282 setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
283 in_be32(&gur->dcsrcr);
288 /* Implement a dummy function for those platforms w/o SERDES */
289 static void __fsl_serdes__init(void)
293 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
296 * Initialize L2 as cache.
298 * The newer 8548, etc, parts have twice as much cache, but
299 * use the same bit-encoding as the older 8555, etc, parts.
304 #ifdef CONFIG_SYS_LBC_LCRR
305 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
308 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
310 mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
316 #if defined(CONFIG_L2_CACHE)
317 volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
318 volatile uint cache_ctl;
323 ver = SVR_SOC_VER(svr);
326 cache_ctl = l2cache->l2ctl;
328 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
329 if (cache_ctl & MPC85xx_L2CTL_L2E) {
330 /* Clear L2 SRAM memory-mapped base address */
331 out_be32(&l2cache->l2srbar0, 0x0);
332 out_be32(&l2cache->l2srbar1, 0x0);
334 /* set MBECCDIS=0, SBECCDIS=0 */
335 clrbits_be32(&l2cache->l2errdis,
336 (MPC85xx_L2ERRDIS_MBECC |
337 MPC85xx_L2ERRDIS_SBECC));
339 /* set L2E=0, L2SRAM=0 */
340 clrbits_be32(&l2cache->l2ctl,
342 MPC85xx_L2CTL_L2SRAM_ENTIRE));
346 l2siz_field = (cache_ctl >> 28) & 0x3;
348 switch (l2siz_field) {
350 printf(" unknown size (0x%08x)\n", cache_ctl);
354 if (ver == SVR_8540 || ver == SVR_8560 ||
355 ver == SVR_8541 || ver == SVR_8541_E ||
356 ver == SVR_8555 || ver == SVR_8555_E) {
358 /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
359 cache_ctl = 0xc4000000;
362 cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
366 if (ver == SVR_8540 || ver == SVR_8560 ||
367 ver == SVR_8541 || ver == SVR_8541_E ||
368 ver == SVR_8555 || ver == SVR_8555_E) {
370 /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
371 cache_ctl = 0xc8000000;
374 /* set L2E=1, L2I=1, & L2SRAM=0 */
375 cache_ctl = 0xc0000000;
380 /* set L2E=1, L2I=1, & L2SRAM=0 */
381 cache_ctl = 0xc0000000;
385 if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
386 puts("already enabled");
387 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
388 u32 l2srbar = l2cache->l2srbar0;
389 if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
390 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
391 l2srbar = CONFIG_SYS_INIT_L2_ADDR;
392 l2cache->l2srbar0 = l2srbar;
393 printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
395 #endif /* CONFIG_SYS_INIT_L2_ADDR */
399 l2cache->l2ctl = cache_ctl; /* invalidate & enable */
403 #elif defined(CONFIG_BACKSIDE_L2_CACHE)
404 if ((SVR_SOC_VER(get_svr()) == SVR_P2040) ||
405 (SVR_SOC_VER(get_svr()) == SVR_P2040_E)) {
410 u32 l2cfg0 = mfspr(SPRN_L2CFG0);
412 /* invalidate the L2 cache */
413 mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
414 while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
417 #ifdef CONFIG_SYS_CACHE_STASHING
418 /* set stash id to (coreID) * 2 + 32 + L2 (1) */
419 mtspr(SPRN_L2CSR1, (32 + 1));
422 /* enable the cache */
423 mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
425 if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
426 while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
428 printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
438 /* needs to be in ram since code uses global static vars */
441 #ifdef CONFIG_SYS_SRIO
445 #if defined(CONFIG_MP)
449 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
452 p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
453 setbits_be32(p, 1 << (31 - 14));
457 #ifdef CONFIG_SYS_LBC_LCRR
459 * Modify the CLKDIV field of LCRR register to improve the writing
460 * speed for NOR flash.
462 clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
463 __raw_readl(&lbc->lcrr);
465 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
470 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
472 ccsr_usb_phy_t *usb_phy1 =
473 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
474 out_be32(&usb_phy1->usb_enable_override,
475 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
478 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
480 ccsr_usb_phy_t *usb_phy2 =
481 (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
482 out_be32(&usb_phy2->usb_enable_override,
483 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
487 #ifdef CONFIG_FMAN_ENET
494 extern void setup_ivors(void);
496 void arch_preboot_os(void)
501 * We are changing interrupt offsets and are about to boot the OS so
502 * we need to make sure we disable all async interrupts. EE is already
503 * disabled by the time we get called.
506 msr &= ~(MSR_ME|MSR_CE|MSR_DE);
512 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
513 int sata_initialize(void)
515 if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
516 return __sata_initialize();
522 void cpu_secondary_init_r(void)
525 uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
526 #ifdef CONFIG_SYS_QE_FW_IN_NAND
528 size_t fw_length = CONFIG_SYS_QE_FW_LENGTH;
530 /* load QE firmware from NAND flash to DDR first */
531 ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
532 &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
534 if (ret && ret == -EUCLEAN) {
535 printf ("NAND read for QE firmware at offset %x failed %d\n",
536 CONFIG_SYS_QE_FW_IN_NAND, ret);