5 * PDC return values ...
6 * All PDC calls return a subset of these errors.
9 #define PDC_WARN 3 /* Call completed with a warning */
10 #define PDC_REQ_ERR_1 2 /* See above */
11 #define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
12 #define PDC_OK 0 /* Call completed successfully */
13 #define PDC_BAD_PROC -1 /* Called non-existent procedure*/
14 #define PDC_BAD_OPTION -2 /* Called with non-existent option */
15 #define PDC_ERROR -3 /* Call could not complete without an error */
16 #define PDC_NE_MOD -5 /* Module not found */
17 #define PDC_NE_CELL_MOD -7 /* Cell module not found */
18 #define PDC_INVALID_ARG -10 /* Called with an invalid argument */
19 #define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
20 #define PDC_NOT_NARROW -17 /* Narrow mode not supported */
26 #define PDC_POW_FAIL 1 /* perform a power-fail */
27 #define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
29 #define PDC_CHASSIS 2 /* PDC-chassis functions */
30 #define PDC_CHASSIS_DISP 0 /* update chassis display */
31 #define PDC_CHASSIS_WARN 1 /* return chassis warnings */
32 #define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
33 #define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
35 #define PDC_PIM 3 /* Get PIM data */
36 #define PDC_PIM_HPMC 0 /* Transfer HPMC data */
37 #define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
38 #define PDC_PIM_LPMC 2 /* Transfer HPMC data */
39 #define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
40 #define PDC_PIM_TOC 4 /* Transfer TOC data */
42 #define PDC_MODEL 4 /* PDC model information call */
43 #define PDC_MODEL_INFO 0 /* returns information */
44 #define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
45 #define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
46 #define PDC_MODEL_SYSMODEL 3 /* return system model info */
47 #define PDC_MODEL_ENSPEC 4 /* enable specific option */
48 #define PDC_MODEL_DISPEC 5 /* disable specific option */
49 #define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
50 #define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
51 /* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
52 #define PDC_MODEL_OS64 (1 << 0)
53 #define PDC_MODEL_OS32 (1 << 1)
54 #define PDC_MODEL_IOPDIR_FDC (1 << 2)
55 #define PDC_MODEL_NVA_MASK (3 << 4)
56 #define PDC_MODEL_NVA_SUPPORTED (0 << 4)
57 #define PDC_MODEL_NVA_SLOW (1 << 4)
58 #define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
59 #define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
60 #define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
62 #define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
63 #define PA90_INSTRUCTION_SET 0x8
65 #define PDC_CACHE 5 /* return/set cache (& TLB) info*/
66 #define PDC_CACHE_INFO 0 /* returns information */
67 #define PDC_CACHE_SET_COH 1 /* set coherence state */
68 #define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
70 #define PDC_HPA 6 /* return HPA of processor */
71 #define PDC_HPA_PROCESSOR 0
72 #define PDC_HPA_MODULES 1
74 #define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
75 #define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
77 #define PDC_IODC 8 /* talk to IODC */
78 #define PDC_IODC_READ 0 /* read IODC entry point */
79 /* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
80 #define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
81 /* 1, 2 obsolete - HVERSION dependent*/
82 #define PDC_IODC_RI_INIT 3 /* Initialize module */
83 #define PDC_IODC_RI_IO 4 /* Module input/output */
84 #define PDC_IODC_RI_SPA 5 /* Module input/output */
85 #define PDC_IODC_RI_CONFIG 6 /* Module input/output */
86 /* 7 obsolete - HVERSION dependent */
87 #define PDC_IODC_RI_TEST 8 /* Module input/output */
88 #define PDC_IODC_RI_TLB 9 /* Module input/output */
89 #define PDC_IODC_NINIT 2 /* non-destructive init */
90 #define PDC_IODC_DINIT 3 /* destructive init */
91 #define PDC_IODC_MEMERR 4 /* check for memory errors */
92 #define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
93 #define PDC_IODC_BUS_ERROR -4 /* bus error return value */
94 #define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
95 #define PDC_IODC_COUNT -6 /* count is too small */
97 #define PDC_TOD 9 /* time-of-day clock (TOD) */
98 #define PDC_TOD_READ 0 /* read TOD */
99 #define PDC_TOD_WRITE 1 /* write TOD */
102 #define PDC_STABLE 10 /* stable storage (sprockets) */
103 #define PDC_STABLE_READ 0
104 #define PDC_STABLE_WRITE 1
105 #define PDC_STABLE_RETURN_SIZE 2
106 #define PDC_STABLE_VERIFY_CONTENTS 3
107 #define PDC_STABLE_INITIALIZE 4
109 #define PDC_NVOLATILE 11 /* often not implemented */
111 #define PDC_ADD_VALID 12 /* Memory validation PDC call */
112 #define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
114 #define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
116 #define PDC_PROC 16 /* (sprockets) */
118 #define PDC_CONFIG 16 /* (sprockets) */
119 #define PDC_CONFIG_DECONFIG 0
120 #define PDC_CONFIG_DRECONFIG 1
121 #define PDC_CONFIG_DRETURN_CONFIG 2
123 #define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
124 #define PDC_BTLB_INFO 0 /* returns parameter */
125 #define PDC_BTLB_INSERT 1 /* insert BTLB entry */
126 #define PDC_BTLB_PURGE 2 /* purge BTLB entries */
127 #define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
129 #define PDC_TLB 19 /* manage hardware TLB miss handling */
130 #define PDC_TLB_INFO 0 /* returns parameter */
131 #define PDC_TLB_SETUP 1 /* set up miss handling */
133 #define PDC_MEM 20 /* Manage memory */
134 #define PDC_MEM_MEMINFO 0
135 #define PDC_MEM_ADD_PAGE 1
136 #define PDC_MEM_CLEAR_PDT 2
137 #define PDC_MEM_READ_PDT 3
138 #define PDC_MEM_RESET_CLEAR 4
139 #define PDC_MEM_GOODMEM 5
140 #define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
141 #define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
142 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
143 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
144 #define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
146 #define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
147 #define PDC_MEM_RET_DUPLICATE_ENTRY 4
148 #define PDC_MEM_RET_BUF_SIZE_SMALL 1
149 #define PDC_MEM_RET_PDT_FULL -11
150 #define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
152 #define PDC_PSW 21 /* Get/Set default System Mask */
153 #define PDC_PSW_MASK 0 /* Return mask */
154 #define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
155 #define PDC_PSW_SET_DEFAULTS 2 /* Set default */
156 #define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
157 #define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
159 #define PDC_SYSTEM_MAP 22 /* find system modules */
160 #define PDC_FIND_MODULE 0
161 #define PDC_FIND_ADDRESS 1
162 #define PDC_TRANSLATE_PATH 2
164 #define PDC_SOFT_POWER 23 /* soft power switch */
165 #define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
166 #define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
169 /* HVERSION dependent */
171 /* The PDC_MEM_MAP calls */
172 #define PDC_MEM_MAP 128 /* on s700: return page info */
173 #define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
175 #define PDC_EEPROM 129 /* EEPROM access */
176 #define PDC_EEPROM_READ_WORD 0
177 #define PDC_EEPROM_WRITE_WORD 1
178 #define PDC_EEPROM_READ_BYTE 2
179 #define PDC_EEPROM_WRITE_BYTE 3
180 #define PDC_EEPROM_EEPROM_PASSWORD -1000
182 #define PDC_NVM 130 /* NVM (non-volatile memory) access */
183 #define PDC_NVM_READ_WORD 0
184 #define PDC_NVM_WRITE_WORD 1
185 #define PDC_NVM_READ_BYTE 2
186 #define PDC_NVM_WRITE_BYTE 3
188 #define PDC_SEED_ERROR 132 /* (sprockets) */
190 #define PDC_IO 135 /* log error info, reset IO system */
191 #define PDC_IO_READ_AND_CLEAR_ERRORS 0
192 #define PDC_IO_RESET 1
193 #define PDC_IO_RESET_DEVICES 2
194 /* sets bits 6&7 (little endian) of the HcControl Register */
195 #define PDC_IO_USB_SUSPEND 0xC000000000000000
196 #define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
197 #define PDC_IO_NO_SUSPEND -6 /* return value */
199 #define PDC_BROADCAST_RESET 136 /* reset all processors */
200 #define PDC_DO_RESET 0 /* option: perform a broadcast reset */
201 #define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
202 #define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
203 #define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
205 #define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
206 #define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
208 #define PDC_LAN_STATION_ID_SIZE 6
210 #define PDC_CHECK_RANGES 139 /* (sprockets) */
212 #define PDC_NV_SECTIONS 141 /* (sprockets) */
214 #define PDC_PERFORMANCE 142 /* performance monitoring */
216 #define PDC_SYSTEM_INFO 143 /* system information */
217 #define PDC_SYSINFO_RETURN_INFO_SIZE 0
218 #define PDC_SYSINFO_RRETURN_SYS_INFO 1
219 #define PDC_SYSINFO_RRETURN_ERRORS 2
220 #define PDC_SYSINFO_RRETURN_WARNINGS 3
221 #define PDC_SYSINFO_RETURN_REVISIONS 4
222 #define PDC_SYSINFO_RRETURN_DIAGNOSE 5
223 #define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
225 #define PDC_RDR 144 /* (sprockets) */
226 #define PDC_RDR_READ_BUFFER 0
227 #define PDC_RDR_READ_SINGLE 1
228 #define PDC_RDR_WRITE_SINGLE 2
230 #define PDC_INTRIGUE 145 /* (sprockets) */
231 #define PDC_INTRIGUE_WRITE_BUFFER 0
232 #define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
233 #define PDC_INTRIGUE_START_CPU_COUNTERS 2
234 #define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
236 #define PDC_STI 146 /* STI access */
237 /* same as PDC_PCI_XXX values (see below) */
239 /* Legacy PDC definitions for same stuff */
240 #define PDC_PCI_INDEX 147
241 #define PDC_PCI_INTERFACE_INFO 0
242 #define PDC_PCI_SLOT_INFO 1
243 #define PDC_PCI_INFLIGHT_BYTES 2
244 #define PDC_PCI_READ_CONFIG 3
245 #define PDC_PCI_WRITE_CONFIG 4
246 #define PDC_PCI_READ_PCI_IO 5
247 #define PDC_PCI_WRITE_PCI_IO 6
248 #define PDC_PCI_READ_CONFIG_DELAY 7
249 #define PDC_PCI_UPDATE_CONFIG_DELAY 8
250 #define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
251 #define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
252 #define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
253 #define PDC_PCI_PCI_RESERVED 12
254 #define PDC_PCI_PCI_INT_ROUTE_SIZE 13
255 #define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
256 #define PDC_PCI_PCI_INT_ROUTE 14
257 #define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
258 #define PDC_PCI_READ_MON_TYPE 15
259 #define PDC_PCI_WRITE_MON_TYPE 16
262 /* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
263 #define PDC_INITIATOR 163
264 #define PDC_GET_INITIATOR 0
265 #define PDC_SET_INITIATOR 1
266 #define PDC_DELETE_INITIATOR 2
267 #define PDC_RETURN_TABLE_SIZE 3
268 #define PDC_RETURN_TABLE 4
270 #define PDC_LINK 165 /* (sprockets) */
271 #define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
272 #define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
275 * page 3-33 of IO-Firmware ARS
276 * IODC ENTRY_INIT(Search first) RET[1]
278 #define CL_NULL 0 /* invalid */
279 #define CL_RANDOM 1 /* random access (as disk) */
280 #define CL_SEQU 2 /* sequential access (as tape) */
281 #define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
282 #define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
283 #define CL_DISPL 9 /* half-duplex console (display) */
284 #define CL_FC 10 /* FiberChannel access media */
286 /* IODC ENTRY_INIT() */
287 #define ENTRY_INIT_SRCH_FRST 2
288 #define ENTRY_INIT_SRCH_NEXT 3
289 #define ENTRY_INIT_MOD_DEV 4
290 #define ENTRY_INIT_DEV 5
291 #define ENTRY_INIT_MOD 6
292 #define ENTRY_INIT_MSG 9
294 /* IODC ENTRY_IO() */
295 #define ENTRY_IO_BOOTIN 0
296 #define ENTRY_IO_BOOTOUT 1
297 #define ENTRY_IO_CIN 2
298 #define ENTRY_IO_COUT 3
299 #define ENTRY_IO_CLOSE 4
300 #define ENTRY_IO_GETMSG 9
301 #define ENTRY_IO_BBLOCK_IN 16
302 #define ENTRY_IO_BBLOCK_OUT 17
304 /* IODC ENTRY_SPA() */
306 /* IODC ENTRY_CONFIG() */
308 /* IODC ENTRY_TEST() */
310 /* IODC ENTRY_TLB() */
312 /* constants for OS (NVM...) */
313 #define OS_ID_NONE 0 /* Undefined OS ID */
314 #define OS_ID_HPUX 1 /* HP-UX OS */
315 #define OS_ID_MPEXL 2 /* MPE XL OS */
316 #define OS_ID_OSF 3 /* OSF OS */
317 #define OS_ID_HPRT 4 /* HP-RT OS */
318 #define OS_ID_NOVEL 5 /* NOVELL OS */
319 #define OS_ID_LINUX 6 /* Linux */
322 /* constants for PDC_CHASSIS */
332 /* Page Zero constant offsets used by the HPMC handler */
333 #define BOOT_CONSOLE_HPA_OFFSET 0x3c0
334 #define BOOT_CONSOLE_SPA_OFFSET 0x3c4
335 #define BOOT_CONSOLE_PATH_OFFSET 0x3a8
337 /* size of the pdc_result buffer for firmware.c */
338 #define NUM_PDC_RESULT 32
340 #if !defined(__ASSEMBLY__)
342 #include <linux/types.h>
346 #include <asm/page.h> /* for __PAGE_OFFSET */
350 /* Values for pdc_type */
351 #define PDC_TYPE_ILLEGAL -1
352 #define PDC_TYPE_PAT 0 /* 64-bit PAT-PDC */
353 #define PDC_TYPE_SYSTEM_MAP 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
354 #define PDC_TYPE_SNAKE 2 /* Doesn't support SYSTEM_MAP */
356 struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */
357 unsigned long actcnt; /* actual number of bytes returned */
358 unsigned long maxcnt; /* maximum number of bytes that could be returned */
361 struct pdc_coproc_cfg { /* for PDC_COPROC_CFG */
362 unsigned long ccr_functional;
363 unsigned long ccr_present;
364 unsigned long revision;
368 struct pdc_model { /* for PDC_MODEL */
369 unsigned long hversion;
370 unsigned long sversion;
372 unsigned long boot_id;
374 unsigned long sw_cap;
375 unsigned long arch_rev;
376 unsigned long pot_key;
377 unsigned long curr_key;
380 struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
385 cc_alias: 4, /* alias boundaries for virtual addresses */
386 cc_block: 4, /* to determine most efficient stride */
387 cc_line : 3, /* maximum amount written back as a result of store (multiple of 16 bytes) */
388 cc_shift: 2, /* how much to shift cc_block left */
389 cc_wt : 1, /* 0 = WT-Dcache, 1 = WB-Dcache */
390 cc_sh : 2, /* 0 = separate I/D-cache, else shared I/D-cache */
391 cc_cst : 3, /* 0 = incoherent D-cache, 1=coherent D-cache */
392 cc_pad1 : 10, /* reserved */
393 cc_hv : 3; /* hversion dependent */
396 struct pdc_tlb_cf { /* for PDC_CACHE (I/D-TLB's) */
397 unsigned long tc_pad0:12, /* reserved */
401 tc_sh : 2, /* 0 = separate I/D-TLB, else shared I/D-TLB */
403 tc_page : 1, /* 0 = 2K page-size-machine, 1 = 4k page size */
404 tc_cst : 3, /* 0 = incoherent operations, else coherent operations */
405 tc_aid : 5, /* ITLB: width of access ids of processor (encoded!) */
406 tc_pad1 : 8; /* ITLB: width of space-registers (encoded) */
409 struct pdc_cache_info { /* main-PDC_CACHE-structure (caches & TLB's) */
411 unsigned long ic_size; /* size in bytes */
412 struct pdc_cache_cf ic_conf; /* configuration */
413 unsigned long ic_base; /* base-addr */
414 unsigned long ic_stride;
415 unsigned long ic_count;
416 unsigned long ic_loop;
418 unsigned long dc_size; /* size in bytes */
419 struct pdc_cache_cf dc_conf; /* configuration */
420 unsigned long dc_base; /* base-addr */
421 unsigned long dc_stride;
422 unsigned long dc_count;
423 unsigned long dc_loop;
424 /* Instruction-TLB */
425 unsigned long it_size; /* number of entries in I-TLB */
426 struct pdc_tlb_cf it_conf; /* I-TLB-configuration */
427 unsigned long it_sp_base;
428 unsigned long it_sp_stride;
429 unsigned long it_sp_count;
430 unsigned long it_off_base;
431 unsigned long it_off_stride;
432 unsigned long it_off_count;
433 unsigned long it_loop;
435 unsigned long dt_size; /* number of entries in D-TLB */
436 struct pdc_tlb_cf dt_conf; /* D-TLB-configuration */
437 unsigned long dt_sp_base;
438 unsigned long dt_sp_stride;
439 unsigned long dt_sp_count;
440 unsigned long dt_off_base;
441 unsigned long dt_off_stride;
442 unsigned long dt_off_count;
443 unsigned long dt_loop;
447 /* If you start using the next struct, you'll have to adjust it to
448 * work with 64-bit firmware I think -PB
450 struct pdc_iodc { /* PDC_IODC */
451 unsigned char hversion_model;
452 unsigned char hversion;
455 unsigned int sversion_rev:4;
456 unsigned int sversion_model:19;
457 unsigned int sversion_opt:8;
460 unsigned char features;
462 unsigned int checksum:16;
463 unsigned int length:16;
464 unsigned int pad[15];
465 } __attribute__((aligned(8))) ;
469 /* no BLTBs in pa2.0 processors */
470 struct pdc_btlb_info_range {
477 struct pdc_btlb_info { /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
478 unsigned int min_size; /* minimum size of BTLB in pages */
479 unsigned int max_size; /* maximum size of BTLB in pages */
480 struct pdc_btlb_info_range fixed_range_info;
481 struct pdc_btlb_info_range variable_range_info;
484 #endif /* !CONFIG_PA20 */
487 struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
488 unsigned long entries_returned;
489 unsigned long entries_total;
492 struct pdc_memory_table { /* PDC_MEM/PDC_MEM_TABLE (arguments) */
495 unsigned int reserved;
497 #endif /* CONFIG_64BIT */
499 struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
500 unsigned long mod_addr;
501 unsigned long mod_pgs;
502 unsigned long add_addrs;
505 struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
506 unsigned long mod_addr;
507 unsigned long mod_pgs;
510 struct pdc_initiator { /* PDC_INITIATOR */
517 struct hardware_path {
518 char flags; /* see bit definitions below */
519 char bc[6]; /* Bus Converter routing info to a specific */
520 /* I/O adaptor (< 0 means none, > 63 resvd) */
521 char mod; /* fixed field of specified module */
525 * Device path specifications used by PDC.
527 struct pdc_module_path {
528 struct hardware_path path;
529 unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
533 /* Only used on some pre-PA2.0 boxes */
534 struct pdc_memory_map { /* PDC_MEMORY_MAP */
535 unsigned long hpa; /* mod's register set address */
536 unsigned long more_pgs; /* number of additional I/O pgs */
541 unsigned long tod_sec;
542 unsigned long tod_usec;
545 /* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
547 struct pdc_hpmc_pim_11 { /* PDC_PIM */
562 __u32 responder_addr;
563 __u32 requestor_addr;
569 * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
571 * Note that PDC_PIM doesn't care whether or not wide mode was enabled
572 * so the results are different on PA1.1 vs. PA2.0 when in narrow mode.
574 * Note also that there are unarchitected results available, which
575 * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
576 * the firmware is probably the best way of printing hversion dependent
580 struct pdc_hpmc_pim_20 { /* PDC_PIM */
594 __u64 responder_addr;
595 __u64 requestor_addr;
599 void pdc_console_init(void); /* in pdc_console.c */
600 void pdc_console_restart(void);
602 void setup_pdc(void); /* in inventory.c */
604 /* wrapper-functions from pdc.c */
606 int pdc_add_valid(unsigned long address);
607 int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
608 int pdc_chassis_disp(unsigned long disp);
609 int pdc_chassis_warn(unsigned long *warn);
610 int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
611 int pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info);
612 int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
613 void *iodc_data, unsigned int iodc_data_size);
614 int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
615 struct pdc_module_path *mod_path, long mod_index);
616 int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
617 long mod_index, long addr_index);
618 int pdc_model_info(struct pdc_model *model);
619 int pdc_model_sysmodel(char *name);
620 int pdc_model_cpuid(unsigned long *cpu_id);
621 int pdc_model_versions(unsigned long *versions, int id);
622 int pdc_model_capabilities(unsigned long *capabilities);
623 int pdc_cache_info(struct pdc_cache_info *cache);
624 int pdc_spaceid_bits(unsigned long *space_bits);
626 int pdc_btlb_info(struct pdc_btlb_info *btlb);
627 int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
628 #endif /* !CONFIG_PA20 */
629 int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
631 int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
632 int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
633 int pdc_stable_get_size(unsigned long *size);
634 int pdc_stable_verify_contents(void);
635 int pdc_stable_initialize(void);
637 int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
638 int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
640 int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
641 int pdc_tod_read(struct pdc_tod *tod);
642 int pdc_tod_set(unsigned long sec, unsigned long usec);
645 int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
646 struct pdc_memory_table *tbl, unsigned long entries);
649 void set_firmware_width(void);
650 void set_firmware_width_unlocked(void);
651 int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
652 int pdc_do_reset(void);
653 int pdc_soft_power_info(unsigned long *power_reg);
654 int pdc_soft_power_button(int sw_control);
655 void pdc_io_reset(void);
656 void pdc_io_reset_devices(void);
657 int pdc_iodc_getc(void);
658 int pdc_iodc_print(const unsigned char *str, unsigned count);
660 void pdc_emergency_unlock(void);
661 int pdc_sti_call(unsigned long func, unsigned long flags,
662 unsigned long inptr, unsigned long outputr,
663 unsigned long glob_cfg);
665 static inline char * os_id_to_string(u16 os_id) {
667 case OS_ID_NONE: return "No OS";
668 case OS_ID_HPUX: return "HP-UX";
669 case OS_ID_MPEXL: return "MPE-iX";
670 case OS_ID_OSF: return "OSF";
671 case OS_ID_HPRT: return "HP-RT";
672 case OS_ID_NOVEL: return "Novell Netware";
673 case OS_ID_LINUX: return "Linux";
674 default: return "Unknown";
678 #endif /* __KERNEL__ */
680 #define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
682 /* DEFINITION OF THE ZERO-PAGE (PAG0) */
683 /* based on work by Jason Eckhardt (jason@equator.com) */
685 /* flags of the device_path */
686 #define PF_AUTOBOOT 0x80
687 #define PF_AUTOSEARCH 0x40
688 #define PF_TIMER 0x0F
690 struct device_path { /* page 1-69 */
691 unsigned char flags; /* flags see above! */
692 unsigned char bc[6]; /* bus converter routing info */
694 unsigned int layers[6];/* device-specific layer-info */
695 } __attribute__((aligned(8))) ;
698 struct device_path dp; /* see above */
699 /* struct iomod *hpa; */
700 unsigned int hpa; /* HPA base address */
702 unsigned int spa; /* SPA base address */
703 /* int (*iodc_io)(struct iomod*, ...); */
704 unsigned int iodc_io; /* device entry point */
705 short pad; /* reserved */
706 unsigned short cl_class;/* see below */
707 } __attribute__((aligned(8))) ;
710 /* [0x000] initialize vectors (VEC) */
711 unsigned int vec_special; /* must be zero */
712 /* int (*vec_pow_fail)(void);*/
713 unsigned int vec_pow_fail; /* power failure handler */
714 /* int (*vec_toc)(void); */
715 unsigned int vec_toc;
716 unsigned int vec_toclen;
717 /* int (*vec_rendz)(void); */
718 unsigned int vec_rendz;
719 int vec_pow_fail_flen;
722 /* [0x040] reserved processor dependent */
725 /* [0x200] reserved */
728 /* [0x350] memory configuration (MC) */
729 int memc_cont; /* contiguous mem size (bytes) */
730 int memc_phsize; /* physical memory size */
731 int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
732 unsigned int mem_pdc_hi; /* used for 64-bit */
734 /* [0x360] various parameters for the boot-CPU */
735 /* unsigned int *mem_booterr[8]; */
736 unsigned int mem_booterr[8]; /* ptr to boot errors */
737 unsigned int mem_free; /* first location, where OS can be loaded */
738 /* struct iomod *mem_hpa; */
739 unsigned int mem_hpa; /* HPA of the boot-CPU */
740 /* int (*mem_pdc)(int, ...); */
741 unsigned int mem_pdc; /* PDC entry point */
742 unsigned int mem_10msec; /* number of clock ticks in 10msec */
744 /* [0x390] initial memory module (IMM) */
745 /* struct iomod *imm_hpa; */
746 unsigned int imm_hpa; /* HPA of the IMM */
747 int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
748 unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
749 unsigned int imm_max_mem; /* bytes of mem in IMM */
751 /* [0x3A0] boot console, display device and keyboard */
752 struct pz_device mem_cons; /* description of console device */
753 struct pz_device mem_boot; /* description of boot device */
754 struct pz_device mem_kbd; /* description of keyboard device */
756 /* [0x430] reserved */
759 /* [0x600] processor dependent */
761 __u32 proc_sti; /* pointer to STI ROM */
765 #endif /* !defined(__ASSEMBLY__) */
767 #endif /* _PARISC_PDC_H */