arch/mips/dts/mt7628a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "ralink,mt7628a-soc";
   7
   8         cpus {
   9                 #address-cells = <1>;
  10                 #size-cells = <0>;
  11
  12                 cpu@0 {
  13                         compatible = "mti,mips24KEc";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17         };
  18
  19         resetc: reset-controller {
  20                 compatible = "ralink,rt2880-reset";
  21                 #reset-cells = <1>;
  22         };
  23
  24         cpuintc: interrupt-controller {
  25                 #address-cells = <0>;
  26                 #interrupt-cells = <1>;
  27                 interrupt-controller;
  28                 compatible = "mti,cpu-interrupt-controller";
  29         };
  30
  31         palmbus@10000000 {
  32                 compatible = "palmbus", "simple-bus";
  33                 reg = <0x10000000 0x200000>;
  34                 ranges = <0x0 0x10000000 0x1FFFFF>;
  35
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38
  39                 sysc: system-controller@0 {
  40                         compatible = "ralink,mt7620a-sysc", "syscon";
  41                         reg = <0x0 0x100>;
  42                 };
  43
  44                 syscon-reboot {
  45                         compatible = "syscon-reboot";
  46                         regmap = <&sysc>;
  47                         offset = <0x34>;
  48                         mask = <0x1>;
  49                 };
  50
  51                 watchdog: watchdog@100 {
  52                         compatible = "ralink,mt7628a-wdt", "mediatek,mt7621-wdt";
  53                         reg = <0x100 0x30>;
  54
  55                         resets = <&resetc 8>;
  56                         reset-names = "wdt";
  57
  58                         interrupt-parent = <&intc>;
  59                         interrupts = <24>;
  60                 };
  61
  62                 intc: interrupt-controller@200 {
  63                         compatible = "ralink,rt2880-intc";
  64                         reg = <0x200 0x100>;
  65
  66                         interrupt-controller;
  67                         #interrupt-cells = <1>;
  68
  69                         resets = <&resetc 9>;
  70                         reset-names = "intc";
  71
  72                         interrupt-parent = <&cpuintc>;
  73                         interrupts = <2>;
  74
  75                         ralink,intc-registers = <0x9c 0xa0
  76                                                  0x6c 0xa4
  77                                                  0x80 0x78>;
  78                 };
  79
  80                 memory-controller@300 {
  81                         compatible = "ralink,mt7620a-memc";
  82                         reg = <0x300 0x100>;
  83                 };
  84
  85                 gpio@600 {
  86                         #address-cells = <1>;
  87                         #size-cells = <0>;
  88
  89                         compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
  90                         reg = <0x600 0x100>;
  91
  92                         interrupt-parent = <&intc>;
  93                         interrupts = <6>;
  94
  95                         gpio0: bank@0 {
  96                                 reg = <0>;
  97                                 compatible = "mtk,mt7621-gpio-bank";
  98                                 gpio-controller;
  99                                 #gpio-cells = <2>;
 100                         };
 101
 102                         gpio1: bank@1 {
 103                                 reg = <1>;
 104                                 compatible = "mtk,mt7621-gpio-bank";
 105                                 gpio-controller;
 106                                 #gpio-cells = <2>;
 107                         };
 108
 109                         gpio2: bank@2 {
 110                                 reg = <2>;
 111                                 compatible = "mtk,mt7621-gpio-bank";
 112                                 gpio-controller;
 113                                 #gpio-cells = <2>;
 114                         };
 115                 };
 116
 117                 spi0: spi@b00 {
 118                         compatible = "ralink,mt7621-spi";
 119                         reg = <0xb00 0x40>;
 120                         #address-cells = <1>;
 121                         #size-cells = <0>;
 122
 123                         clock-frequency = <200000000>;
 124                 };
 125
 126                 uart0: uartlite@c00 {
 127                         compatible = "mediatek,hsuart", "ns16550a";
 128                         reg = <0xc00 0x100>;
 129
 130                         clock-frequency = <40000000>;
 131
 132                         resets = <&resetc 12>;
 133                         reset-names = "uart0";
 134
 135                         interrupt-parent = <&intc>;
 136                         interrupts = <20>;
 137
 138                         reg-shift = <2>;
 139                 };
 140
 141                 uart1: uart1@d00 {
 142                         compatible = "mediatek,hsuart", "ns16550a";
 143                         reg = <0xd00 0x100>;
 144
 145                         clock-frequency = <40000000>;
 146
 147                         resets = <&resetc 19>;
 148                         reset-names = "uart1";
 149
 150                         interrupt-parent = <&intc>;
 151                         interrupts = <21>;
 152
 153                         reg-shift = <2>;
 154                 };
 155
 156                 uart2: uart2@e00 {
 157                         compatible = "mediatek,hsuart", "ns16550a";
 158                         reg = <0xe00 0x100>;
 159
 160                         clock-frequency = <40000000>;
 161
 162                         resets = <&resetc 20>;
 163                         reset-names = "uart2";
 164
 165                         interrupt-parent = <&intc>;
 166                         interrupts = <22>;
 167
 168                         reg-shift = <2>;
 169                 };
 170         };
 171
 172         eth@10110000 {
 173                 compatible = "mediatek,mt7628-eth";
 174                 reg = <0x10100000 0x10000
 175                        0x10110000 0x8000>;
 176
 177                 syscon = <&sysc>;
 178         };
 179
 180         usb_phy: usb-phy@10120000 {
 181                 compatible = "mediatek,mt7628-usbphy";
 182                 reg = <0x10120000 0x1000>;
 183
 184                 #phy-cells = <0>;
 185
 186                 ralink,sysctl = <&sysc>;
 187                 resets = <&resetc 22 &resetc 25>;
 188                 reset-names = "host", "device";
 189         };
 190
 191         ehci@101c0000 {
 192                 compatible = "generic-ehci";
 193                 reg = <0x101c0000 0x1000>;
 194
 195                 phys = <&usb_phy>;
 196                 phy-names = "usb";
 197
 198                 interrupt-parent = <&intc>;
 199                 interrupts = <18>;
 200         };
 201 };