arch/mips/dts/mt7628a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "ralink,mt7628a-soc";
   7
   8         cpus {
   9                 #address-cells = <1>;
  10                 #size-cells = <0>;
  11
  12                 cpu@0 {
  13                         compatible = "mti,mips24KEc";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17         };
  18
  19         resetc: reset-controller {
  20                 compatible = "ralink,rt2880-reset";
  21                 #reset-cells = <1>;
  22         };
  23
  24         cpuintc: interrupt-controller {
  25                 #address-cells = <0>;
  26                 #interrupt-cells = <1>;
  27                 interrupt-controller;
  28                 compatible = "mti,cpu-interrupt-controller";
  29         };
  30
  31         palmbus@10000000 {
  32                 compatible = "palmbus", "simple-bus";
  33                 reg = <0x10000000 0x200000>;
  34                 ranges = <0x0 0x10000000 0x1FFFFF>;
  35
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38
  39                 sysc: system-controller@0 {
  40                         compatible = "ralink,mt7620a-sysc", "syscon";
  41                         reg = <0x0 0x100>;
  42                 };
  43
  44                 syscon-reboot {
  45                         compatible = "syscon-reboot";
  46                         regmap = <&sysc>;
  47                         offset = <0x34>;
  48                         mask = <0x1>;
  49                 };
  50
  51                 intc: interrupt-controller@200 {
  52                         compatible = "ralink,rt2880-intc";
  53                         reg = <0x200 0x100>;
  54
  55                         interrupt-controller;
  56                         #interrupt-cells = <1>;
  57
  58                         resets = <&resetc 9>;
  59                         reset-names = "intc";
  60
  61                         interrupt-parent = <&cpuintc>;
  62                         interrupts = <2>;
  63
  64                         ralink,intc-registers = <0x9c 0xa0
  65                                                  0x6c 0xa4
  66                                                  0x80 0x78>;
  67                 };
  68
  69                 memory-controller@300 {
  70                         compatible = "ralink,mt7620a-memc";
  71                         reg = <0x300 0x100>;
  72                 };
  73
  74                 spi0: spi@b00 {
  75                         compatible = "ralink,mt7621-spi";
  76                         reg = <0xb00 0x40>;
  77                         #address-cells = <1>;
  78                         #size-cells = <0>;
  79                 };
  80
  81                 uart0: uartlite@c00 {
  82                         compatible = "ns16550a";
  83                         reg = <0xc00 0x100>;
  84
  85                         resets = <&resetc 12>;
  86                         reset-names = "uart0";
  87
  88                         interrupt-parent = <&intc>;
  89                         interrupts = <20>;
  90
  91                         reg-shift = <2>;
  92                 };
  93
  94                 uart1: uart1@d00 {
  95                         compatible = "ns16550a";
  96                         reg = <0xd00 0x100>;
  97
  98                         resets = <&resetc 19>;
  99                         reset-names = "uart1";
 100
 101                         interrupt-parent = <&intc>;
 102                         interrupts = <21>;
 103
 104                         reg-shift = <2>;
 105                 };
 106
 107                 uart2: uart2@e00 {
 108                         compatible = "ns16550a";
 109                         reg = <0xe00 0x100>;
 110
 111                         resets = <&resetc 20>;
 112                         reset-names = "uart2";
 113
 114                         interrupt-parent = <&intc>;
 115                         interrupts = <22>;
 116
 117                         reg-shift = <2>;
 118                 };
 119         };
 120
 121         usb_phy: usb-phy@10120000 {
 122                 compatible = "mediatek,mt7628-usbphy";
 123                 reg = <0x10120000 0x1000>;
 124
 125                 #phy-cells = <0>;
 126
 127                 ralink,sysctl = <&sysc>;
 128                 resets = <&resetc 22 &resetc 25>;
 129                 reset-names = "host", "device";
 130         };
 131
 132         ehci@101c0000 {
 133                 compatible = "generic-ehci";
 134                 reg = <0x101c0000 0x1000>;
 135
 136                 phys = <&usb_phy>;
 137                 phy-names = "usb";
 138
 139                 interrupt-parent = <&intc>;
 140                 interrupts = <18>;
 141         };
 142 };