arch/mips/dts/brcm,bcm63268.dtsi

   1 /*
   2  * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <dt-bindings/clock/bcm63268-clock.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/power-domain/bcm63268-power-domain.h>
  10 #include <dt-bindings/reset/bcm63268-reset.h>
  11 #include "skeleton.dtsi"
  12
  13 / {
  14         compatible = "brcm,bcm63268";
  15
  16         cpus {
  17                 reg = <0x10000000 0x4>;
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 u-boot,dm-pre-reloc;
  21
  22                 cpu@0 {
  23                         compatible = "brcm,bcm63268-cpu", "mips,mips4Kc";
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         u-boot,dm-pre-reloc;
  27                 };
  28
  29                 cpu@1 {
  30                         compatible = "brcm,bcm63268-cpu", "mips,mips4Kc";
  31                         device_type = "cpu";
  32                         reg = <1>;
  33                         u-boot,dm-pre-reloc;
  34                 };
  35         };
  36
  37         clocks {
  38                 compatible = "simple-bus";
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 u-boot,dm-pre-reloc;
  42
  43                 periph_osc: periph-osc {
  44                         compatible = "fixed-clock";
  45                         #clock-cells = <0>;
  46                         clock-frequency = <50000000>;
  47                         u-boot,dm-pre-reloc;
  48                 };
  49
  50                 periph_clk: periph-clk {
  51                         compatible = "brcm,bcm6345-clk";
  52                         reg = <0x10000004 0x4>;
  53                         #clock-cells = <1>;
  54                 };
  55
  56                 timer_clk: timer-clk {
  57                         compatible = "brcm,bcm6345-clk";
  58                         reg = <0x100000ac 0x4>;
  59                         #clock-cells = <1>;
  60                 };
  61         };
  62
  63         ubus {
  64                 compatible = "simple-bus";
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 u-boot,dm-pre-reloc;
  68
  69                 pll_cntl: syscon@10000008 {
  70                         compatible = "syscon";
  71                         reg = <0x10000008 0x4>;
  72                 };
  73
  74                 syscon-reboot {
  75                         compatible = "syscon-reboot";
  76                         regmap = <&pll_cntl>;
  77                         offset = <0x0>;
  78                         mask = <0x1>;
  79                 };
  80
  81                 periph_rst: reset-controller@10000010 {
  82                         compatible = "brcm,bcm6345-reset";
  83                         reg = <0x10000010 0x4>;
  84                         #reset-cells = <1>;
  85                 };
  86
  87                 gpio1: gpio-controller@100000c0 {
  88                         compatible = "brcm,bcm6345-gpio";
  89                         reg = <0x100000c0 0x4>, <0x100000c8 0x4>;
  90                         gpio-controller;
  91                         #gpio-cells = <2>;
  92                         ngpios = <20>;
  93
  94                         status = "disabled";
  95                 };
  96
  97                 gpio0: gpio-controller@100000c4 {
  98                         compatible = "brcm,bcm6345-gpio";
  99                         reg = <0x100000c4 0x4>, <0x100000cc 0x4>;
 100                         gpio-controller;
 101                         #gpio-cells = <2>;
 102
 103                         status = "disabled";
 104                 };
 105
 106                 uart0: serial@10000180 {
 107                         compatible = "brcm,bcm6345-uart";
 108                         reg = <0x10000180 0x18>;
 109                         clocks = <&periph_osc>;
 110
 111                         status = "disabled";
 112                 };
 113
 114                 uart1: serial@100001a0 {
 115                         compatible = "brcm,bcm6345-uart";
 116                         reg = <0x100001a0 0x18>;
 117                         clocks = <&periph_osc>;
 118
 119                         status = "disabled";
 120                 };
 121
 122                 periph_pwr: power-controller@1000184c {
 123                         compatible = "brcm,bcm6328-power-domain";
 124                         reg = <0x1000184c 0x4>;
 125                         #power-domain-cells = <1>;
 126                 };
 127
 128                 leds: led-controller@10001900 {
 129                         compatible = "brcm,bcm6328-leds";
 130                         reg = <0x10001900 0x24>;
 131                         #address-cells = <1>;
 132                         #size-cells = <0>;
 133
 134                         status = "disabled";
 135                 };
 136
 137                 memory-controller@10003000 {
 138                         compatible = "brcm,bcm6328-mc";
 139                         reg = <0x10003000 0x894>;
 140                         u-boot,dm-pre-reloc;
 141                 };
 142         };
 143 };