arch/mips/alchemy/devboards/db1300.c

   1 /*
   2  * DBAu1300 init and platform device setup.
   3  *
   4  * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
   5  */
   6
   7 #include <linux/dma-mapping.h>
   8 #include <linux/gpio.h>
   9 #include <linux/gpio_keys.h>
  10 #include <linux/init.h>
  11 #include <linux/input.h>        /* KEY_* codes */
  12 #include <linux/i2c.h>
  13 #include <linux/io.h>
  14 #include <linux/leds.h>
  15 #include <linux/ata_platform.h>
  16 #include <linux/mmc/host.h>
  17 #include <linux/module.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/nand.h>
  20 #include <linux/mtd/partitions.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/smsc911x.h>
  23
  24 #include <asm/mach-au1x00/au1000.h>
  25 #include <asm/mach-au1x00/au1100_mmc.h>
  26 #include <asm/mach-au1x00/au1200fb.h>
  27 #include <asm/mach-au1x00/au1xxx_dbdma.h>
  28 #include <asm/mach-au1x00/au1xxx_psc.h>
  29 #include <asm/mach-db1x00/db1300.h>
  30 #include <asm/mach-db1x00/bcsr.h>
  31 #include <asm/mach-au1x00/prom.h>
  32
  33 #include "platform.h"
  34
  35 static struct i2c_board_info db1300_i2c_devs[] __initdata = {
  36         { I2C_BOARD_INFO("wm8731", 0x1b), },    /* I2S audio codec */
  37         { I2C_BOARD_INFO("ne1619", 0x2d), },    /* adm1025-compat hwmon */
  38 };
  39
  40 /* multifunction pins to assign to GPIO controller */
  41 static int db1300_gpio_pins[] __initdata = {
  42         AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
  43         AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
  44         AU1300_PIN_EXTCLK1,
  45         -1,     /* terminator */
  46 };
  47
  48 /* multifunction pins to assign to device functions */
  49 static int db1300_dev_pins[] __initdata = {
  50         /* wake-from-str pins 0-3 */
  51         AU1300_PIN_WAKE0,
  52         /* external clock sources for PSC0 */
  53         AU1300_PIN_EXTCLK0,
  54         /* 8bit MMC interface on SD0: 6-9 */
  55         AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
  56         AU1300_PIN_SD0DAT7,
  57         /* UART1 pins: 11-18 */
  58         AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
  59         AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
  60         AU1300_PIN_U1RX, AU1300_PIN_U1TX,
  61         /* UART0 pins: 19-24 */
  62         AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
  63         AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
  64         /* UART2: 25-26 */
  65         AU1300_PIN_U2RX, AU1300_PIN_U2TX,
  66         /* UART3: 27-28 */
  67         AU1300_PIN_U3RX, AU1300_PIN_U3TX,
  68         /* LCD controller PWMs, ext pixclock: 30-31 */
  69         AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
  70         /* SD1 interface: 32-37 */
  71         AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
  72         AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
  73         /* SD2 interface: 38-43 */
  74         AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
  75         AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
  76         /* PSC0/1 clocks: 44-45 */
  77         AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
  78         /* PSCs: 46-49/50-53/54-57/58-61 */
  79         AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
  80         AU1300_PIN_PSC0D1,
  81         AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
  82         AU1300_PIN_PSC1D1,
  83         AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
  84         AU1300_PIN_PSC2D1,
  85         AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
  86         AU1300_PIN_PSC3D1,
  87         /* PCMCIA interface: 62-70 */
  88         AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
  89         AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
  90         AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
  91         /* camera interface H/V sync inputs: 71-72 */
  92         AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
  93         /* PSC2/3 clocks: 73-74 */
  94         AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
  95         -1,     /* terminator */
  96 };
  97
  98 static void __init db1300_gpio_config(void)
  99 {
 100         int *i;
 101
 102         i = &db1300_dev_pins[0];
 103         while (*i != -1)
 104                 au1300_pinfunc_to_dev(*i++);
 105
 106         i = &db1300_gpio_pins[0];
 107         while (*i != -1)
 108                 au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
 109
 110         au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
 111 }
 112
 113 char *get_system_type(void)
 114 {
 115         return "DB1300";
 116 }
 117
 118 /**********************************************************************/
 119
 120 static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 121                                  unsigned int ctrl)
 122 {
 123         struct nand_chip *this = mtd->priv;
 124         unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 125
 126         ioaddr &= 0xffffff00;
 127
 128         if (ctrl & NAND_CLE) {
 129                 ioaddr += MEM_STNAND_CMD;
 130         } else if (ctrl & NAND_ALE) {
 131                 ioaddr += MEM_STNAND_ADDR;
 132         } else {
 133                 /* assume we want to r/w real data  by default */
 134                 ioaddr += MEM_STNAND_DATA;
 135         }
 136         this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
 137         if (cmd != NAND_CMD_NONE) {
 138                 __raw_writeb(cmd, this->IO_ADDR_W);
 139                 wmb();
 140         }
 141 }
 142
 143 static int au1300_nand_device_ready(struct mtd_info *mtd)
 144 {
 145         return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 146 }
 147
 148 static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
 149
 150 static struct mtd_partition db1300_nand_parts[] = {
 151         {
 152                 .name   = "NAND FS 0",
 153                 .offset = 0,
 154                 .size   = 8 * 1024 * 1024,
 155         },
 156         {
 157                 .name   = "NAND FS 1",
 158                 .offset = MTDPART_OFS_APPEND,
 159                 .size   = MTDPART_SIZ_FULL
 160         },
 161 };
 162
 163 struct platform_nand_data db1300_nand_platdata = {
 164         .chip = {
 165                 .nr_chips       = 1,
 166                 .chip_offset    = 0,
 167                 .nr_partitions  = ARRAY_SIZE(db1300_nand_parts),
 168                 .partitions     = db1300_nand_parts,
 169                 .chip_delay     = 20,
 170                 .part_probe_types = db1300_part_probes,
 171         },
 172         .ctrl = {
 173                 .dev_ready      = au1300_nand_device_ready,
 174                 .cmd_ctrl       = au1300_nand_cmd_ctrl,
 175         },
 176 };
 177
 178 static struct resource db1300_nand_res[] = {
 179         [0] = {
 180                 .start  = DB1300_NAND_PHYS_ADDR,
 181                 .end    = DB1300_NAND_PHYS_ADDR + 0xff,
 182                 .flags  = IORESOURCE_MEM,
 183         },
 184 };
 185
 186 static struct platform_device db1300_nand_dev = {
 187         .name           = "gen_nand",
 188         .num_resources  = ARRAY_SIZE(db1300_nand_res),
 189         .resource       = db1300_nand_res,
 190         .id             = -1,
 191         .dev            = {
 192                 .platform_data = &db1300_nand_platdata,
 193         }
 194 };
 195
 196 /**********************************************************************/
 197
 198 static struct resource db1300_eth_res[] = {
 199         [0] = {
 200                 .start          = DB1300_ETH_PHYS_ADDR,
 201                 .end            = DB1300_ETH_PHYS_END,
 202                 .flags          = IORESOURCE_MEM,
 203         },
 204         [1] = {
 205                 .start          = DB1300_ETH_INT,
 206                 .end            = DB1300_ETH_INT,
 207                 .flags          = IORESOURCE_IRQ,
 208         },
 209 };
 210
 211 static struct smsc911x_platform_config db1300_eth_config = {
 212         .phy_interface          = PHY_INTERFACE_MODE_MII,
 213         .irq_polarity           = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 214         .irq_type               = SMSC911X_IRQ_TYPE_PUSH_PULL,
 215         .flags                  = SMSC911X_USE_32BIT,
 216 };
 217
 218 static struct platform_device db1300_eth_dev = {
 219         .name                   = "smsc911x",
 220         .id                     = -1,
 221         .num_resources          = ARRAY_SIZE(db1300_eth_res),
 222         .resource               = db1300_eth_res,
 223         .dev = {
 224                 .platform_data  = &db1300_eth_config,
 225         },
 226 };
 227
 228 /**********************************************************************/
 229
 230 static struct resource au1300_psc1_res[] = {
 231         [0] = {
 232                 .start  = AU1300_PSC1_PHYS_ADDR,
 233                 .end    = AU1300_PSC1_PHYS_ADDR + 0x0fff,
 234                 .flags  = IORESOURCE_MEM,
 235         },
 236         [1] = {
 237                 .start  = AU1300_PSC1_INT,
 238                 .end    = AU1300_PSC1_INT,
 239                 .flags  = IORESOURCE_IRQ,
 240         },
 241         [2] = {
 242                 .start  = AU1300_DSCR_CMD0_PSC1_TX,
 243                 .end    = AU1300_DSCR_CMD0_PSC1_TX,
 244                 .flags  = IORESOURCE_DMA,
 245         },
 246         [3] = {
 247                 .start  = AU1300_DSCR_CMD0_PSC1_RX,
 248                 .end    = AU1300_DSCR_CMD0_PSC1_RX,
 249                 .flags  = IORESOURCE_DMA,
 250         },
 251 };
 252
 253 static struct platform_device db1300_ac97_dev = {
 254         .name           = "au1xpsc_ac97",
 255         .id             = 1,    /* PSC ID. match with AC97 codec ID! */
 256         .num_resources  = ARRAY_SIZE(au1300_psc1_res),
 257         .resource       = au1300_psc1_res,
 258 };
 259
 260 /**********************************************************************/
 261
 262 static struct resource au1300_psc2_res[] = {
 263         [0] = {
 264                 .start  = AU1300_PSC2_PHYS_ADDR,
 265                 .end    = AU1300_PSC2_PHYS_ADDR + 0x0fff,
 266                 .flags  = IORESOURCE_MEM,
 267         },
 268         [1] = {
 269                 .start  = AU1300_PSC2_INT,
 270                 .end    = AU1300_PSC2_INT,
 271                 .flags  = IORESOURCE_IRQ,
 272         },
 273         [2] = {
 274                 .start  = AU1300_DSCR_CMD0_PSC2_TX,
 275                 .end    = AU1300_DSCR_CMD0_PSC2_TX,
 276                 .flags  = IORESOURCE_DMA,
 277         },
 278         [3] = {
 279                 .start  = AU1300_DSCR_CMD0_PSC2_RX,
 280                 .end    = AU1300_DSCR_CMD0_PSC2_RX,
 281                 .flags  = IORESOURCE_DMA,
 282         },
 283 };
 284
 285 static struct platform_device db1300_i2s_dev = {
 286         .name           = "au1xpsc_i2s",
 287         .id             = 2,    /* PSC ID */
 288         .num_resources  = ARRAY_SIZE(au1300_psc2_res),
 289         .resource       = au1300_psc2_res,
 290 };
 291
 292 /**********************************************************************/
 293
 294 static struct resource au1300_psc3_res[] = {
 295         [0] = {
 296                 .start  = AU1300_PSC3_PHYS_ADDR,
 297                 .end    = AU1300_PSC3_PHYS_ADDR + 0x0fff,
 298                 .flags  = IORESOURCE_MEM,
 299         },
 300         [1] = {
 301                 .start  = AU1300_PSC3_INT,
 302                 .end    = AU1300_PSC3_INT,
 303                 .flags  = IORESOURCE_IRQ,
 304         },
 305         [2] = {
 306                 .start  = AU1300_DSCR_CMD0_PSC3_TX,
 307                 .end    = AU1300_DSCR_CMD0_PSC3_TX,
 308                 .flags  = IORESOURCE_DMA,
 309         },
 310         [3] = {
 311                 .start  = AU1300_DSCR_CMD0_PSC3_RX,
 312                 .end    = AU1300_DSCR_CMD0_PSC3_RX,
 313                 .flags  = IORESOURCE_DMA,
 314         },
 315 };
 316
 317 static struct platform_device db1300_i2c_dev = {
 318         .name           = "au1xpsc_smbus",
 319         .id             = 0,    /* bus number */
 320         .num_resources  = ARRAY_SIZE(au1300_psc3_res),
 321         .resource       = au1300_psc3_res,
 322 };
 323
 324 /**********************************************************************/
 325
 326 /* proper key assignments when facing the LCD panel.  For key assignments
 327  * according to the schematics swap up with down and left with right.
 328  * I chose to use it to emulate the arrow keys of a keyboard.
 329  */
 330 static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
 331         {
 332                 .code                   = KEY_DOWN,
 333                 .gpio                   = AU1300_PIN_LCDPWM0,
 334                 .type                   = EV_KEY,
 335                 .debounce_interval      = 1,
 336                 .active_low             = 1,
 337                 .desc                   = "5waysw-down",
 338         },
 339         {
 340                 .code                   = KEY_UP,
 341                 .gpio                   = AU1300_PIN_PSC2SYNC1,
 342                 .type                   = EV_KEY,
 343                 .debounce_interval      = 1,
 344                 .active_low             = 1,
 345                 .desc                   = "5waysw-up",
 346         },
 347         {
 348                 .code                   = KEY_RIGHT,
 349                 .gpio                   = AU1300_PIN_WAKE3,
 350                 .type                   = EV_KEY,
 351                 .debounce_interval      = 1,
 352                 .active_low             = 1,
 353                 .desc                   = "5waysw-right",
 354         },
 355         {
 356                 .code                   = KEY_LEFT,
 357                 .gpio                   = AU1300_PIN_WAKE2,
 358                 .type                   = EV_KEY,
 359                 .debounce_interval      = 1,
 360                 .active_low             = 1,
 361                 .desc                   = "5waysw-left",
 362         },
 363         {
 364                 .code                   = KEY_ENTER,
 365                 .gpio                   = AU1300_PIN_WAKE1,
 366                 .type                   = EV_KEY,
 367                 .debounce_interval      = 1,
 368                 .active_low             = 1,
 369                 .desc                   = "5waysw-push",
 370         },
 371 };
 372
 373 static struct gpio_keys_platform_data db1300_5waysw_data = {
 374         .buttons        = db1300_5waysw_arrowkeys,
 375         .nbuttons       = ARRAY_SIZE(db1300_5waysw_arrowkeys),
 376         .rep            = 1,
 377         .name           = "db1300-5wayswitch",
 378 };
 379
 380 static struct platform_device db1300_5waysw_dev = {
 381         .name           = "gpio-keys",
 382         .dev    = {
 383                 .platform_data  = &db1300_5waysw_data,
 384         },
 385 };
 386
 387 /**********************************************************************/
 388
 389 static struct pata_platform_info db1300_ide_info = {
 390         .ioport_shift   = DB1300_IDE_REG_SHIFT,
 391 };
 392
 393 #define IDE_ALT_START   (14 << DB1300_IDE_REG_SHIFT)
 394 static struct resource db1300_ide_res[] = {
 395         [0] = {
 396                 .start  = DB1300_IDE_PHYS_ADDR,
 397                 .end    = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
 398                 .flags  = IORESOURCE_MEM,
 399         },
 400         [1] = {
 401                 .start  = DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
 402                 .end    = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
 403                 .flags  = IORESOURCE_MEM,
 404         },
 405         [2] = {
 406                 .start  = DB1300_IDE_INT,
 407                 .end    = DB1300_IDE_INT,
 408                 .flags  = IORESOURCE_IRQ,
 409         },
 410 };
 411
 412 static struct platform_device db1300_ide_dev = {
 413         .dev    = {
 414                 .platform_data  = &db1300_ide_info,
 415         },
 416         .name           = "pata_platform",
 417         .resource       = db1300_ide_res,
 418         .num_resources  = ARRAY_SIZE(db1300_ide_res),
 419 };
 420
 421 /**********************************************************************/
 422
 423 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 424 {
 425         void(*mmc_cd)(struct mmc_host *, unsigned long);
 426
 427         /* disable the one currently screaming. No other way to shut it up */
 428         if (irq == DB1300_SD1_INSERT_INT) {
 429                 disable_irq_nosync(DB1300_SD1_INSERT_INT);
 430                 enable_irq(DB1300_SD1_EJECT_INT);
 431         } else {
 432                 disable_irq_nosync(DB1300_SD1_EJECT_INT);
 433                 enable_irq(DB1300_SD1_INSERT_INT);
 434         }
 435
 436         /* link against CONFIG_MMC=m.  We can only be called once MMC core has
 437          * initialized the controller, so symbol_get() should always succeed.
 438          */
 439         mmc_cd = symbol_get(mmc_detect_change);
 440         mmc_cd(ptr, msecs_to_jiffies(500));
 441         symbol_put(mmc_detect_change);
 442
 443         return IRQ_HANDLED;
 444 }
 445
 446 static int db1300_mmc_card_readonly(void *mmc_host)
 447 {
 448         /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
 449         return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
 450 }
 451
 452 static int db1300_mmc_card_inserted(void *mmc_host)
 453 {
 454         return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
 455 }
 456
 457 static int db1300_mmc_cd_setup(void *mmc_host, int en)
 458 {
 459         int ret;
 460
 461         if (en) {
 462                 ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
 463                                   "sd_insert", mmc_host);
 464                 if (ret)
 465                         goto out;
 466
 467                 ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
 468                                   "sd_eject", mmc_host);
 469                 if (ret) {
 470                         free_irq(DB1300_SD1_INSERT_INT, mmc_host);
 471                         goto out;
 472                 }
 473
 474                 if (db1300_mmc_card_inserted(mmc_host))
 475                         enable_irq(DB1300_SD1_EJECT_INT);
 476                 else
 477                         enable_irq(DB1300_SD1_INSERT_INT);
 478
 479         } else {
 480                 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
 481                 free_irq(DB1300_SD1_EJECT_INT, mmc_host);
 482         }
 483         ret = 0;
 484 out:
 485         return ret;
 486 }
 487
 488 static void db1300_mmcled_set(struct led_classdev *led,
 489                               enum led_brightness brightness)
 490 {
 491         if (brightness != LED_OFF)
 492                 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 493         else
 494                 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 495 }
 496
 497 static struct led_classdev db1300_mmc_led = {
 498         .brightness_set = db1300_mmcled_set,
 499 };
 500
 501 struct au1xmmc_platform_data db1300_sd1_platdata = {
 502         .cd_setup       = db1300_mmc_cd_setup,
 503         .card_inserted  = db1300_mmc_card_inserted,
 504         .card_readonly  = db1300_mmc_card_readonly,
 505         .led            = &db1300_mmc_led,
 506 };
 507
 508 static struct resource au1300_sd1_res[] = {
 509         [0] = {
 510                 .start  = AU1300_SD1_PHYS_ADDR,
 511                 .end    = AU1300_SD1_PHYS_ADDR,
 512                 .flags  = IORESOURCE_MEM,
 513         },
 514         [1] = {
 515                 .start  = AU1300_SD1_INT,
 516                 .end    = AU1300_SD1_INT,
 517                 .flags  = IORESOURCE_IRQ,
 518         },
 519         [2] = {
 520                 .start  = AU1300_DSCR_CMD0_SDMS_TX1,
 521                 .end    = AU1300_DSCR_CMD0_SDMS_TX1,
 522                 .flags  = IORESOURCE_DMA,
 523         },
 524         [3] = {
 525                 .start  = AU1300_DSCR_CMD0_SDMS_RX1,
 526                 .end    = AU1300_DSCR_CMD0_SDMS_RX1,
 527                 .flags  = IORESOURCE_DMA,
 528         },
 529 };
 530
 531 static struct platform_device db1300_sd1_dev = {
 532         .dev = {
 533                 .platform_data  = &db1300_sd1_platdata,
 534         },
 535         .name           = "au1xxx-mmc",
 536         .id             = 1,
 537         .resource       = au1300_sd1_res,
 538         .num_resources  = ARRAY_SIZE(au1300_sd1_res),
 539 };
 540
 541 /**********************************************************************/
 542
 543 static int db1300_movinand_inserted(void *mmc_host)
 544 {
 545         return 0; /* disable for now, it doesn't work yet */
 546 }
 547
 548 static int db1300_movinand_readonly(void *mmc_host)
 549 {
 550         return 0;
 551 }
 552
 553 static void db1300_movinand_led_set(struct led_classdev *led,
 554                                     enum led_brightness brightness)
 555 {
 556         if (brightness != LED_OFF)
 557                 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
 558         else
 559                 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
 560 }
 561
 562 static struct led_classdev db1300_movinand_led = {
 563         .brightness_set         = db1300_movinand_led_set,
 564 };
 565
 566 struct au1xmmc_platform_data db1300_sd0_platdata = {
 567         .card_inserted          = db1300_movinand_inserted,
 568         .card_readonly          = db1300_movinand_readonly,
 569         .led                    = &db1300_movinand_led,
 570         .mask_host_caps         = MMC_CAP_NEEDS_POLL,
 571 };
 572
 573 static struct resource au1300_sd0_res[] = {
 574         [0] = {
 575                 .start  = AU1100_SD0_PHYS_ADDR,
 576                 .end    = AU1100_SD0_PHYS_ADDR,
 577                 .flags  = IORESOURCE_MEM,
 578         },
 579         [1] = {
 580                 .start  = AU1300_SD0_INT,
 581                 .end    = AU1300_SD0_INT,
 582                 .flags  = IORESOURCE_IRQ,
 583         },
 584         [2] = {
 585                 .start  = AU1300_DSCR_CMD0_SDMS_TX0,
 586                 .end    = AU1300_DSCR_CMD0_SDMS_TX0,
 587                 .flags  = IORESOURCE_DMA,
 588         },
 589         [3] = {
 590                 .start  = AU1300_DSCR_CMD0_SDMS_RX0,
 591                 .end    = AU1300_DSCR_CMD0_SDMS_RX0,
 592                 .flags  = IORESOURCE_DMA,
 593         },
 594 };
 595
 596 static struct platform_device db1300_sd0_dev = {
 597         .dev = {
 598                 .platform_data  = &db1300_sd0_platdata,
 599         },
 600         .name           = "au1xxx-mmc",
 601         .id             = 0,
 602         .resource       = au1300_sd0_res,
 603         .num_resources  = ARRAY_SIZE(au1300_sd0_res),
 604 };
 605
 606 /**********************************************************************/
 607
 608 static struct platform_device db1300_wm9715_dev = {
 609         .name           = "wm9712-codec",
 610         .id             = 1,    /* ID of PSC for AC97 audio, see asoc glue! */
 611 };
 612
 613 static struct platform_device db1300_ac97dma_dev = {
 614         .name           = "au1xpsc-pcm",
 615         .id             = 1,    /* PSC ID */
 616 };
 617
 618 static struct platform_device db1300_i2sdma_dev = {
 619         .name           = "au1xpsc-pcm",
 620         .id             = 2,    /* PSC ID */
 621 };
 622
 623 static struct platform_device db1300_sndac97_dev = {
 624         .name           = "db1300-ac97",
 625 };
 626
 627 static struct platform_device db1300_sndi2s_dev = {
 628         .name           = "db1300-i2s",
 629 };
 630
 631 /**********************************************************************/
 632
 633 static int db1300fb_panel_index(void)
 634 {
 635         return 9;       /* DB1300_800x480 */
 636 }
 637
 638 static int db1300fb_panel_init(void)
 639 {
 640         /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
 641         bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
 642                              BCSR_BOARD_LCDBL);
 643         return 0;
 644 }
 645
 646 static int db1300fb_panel_shutdown(void)
 647 {
 648         /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
 649         bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
 650                              BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
 651         return 0;
 652 }
 653
 654 static struct au1200fb_platdata db1300fb_pd = {
 655         .panel_index    = db1300fb_panel_index,
 656         .panel_init     = db1300fb_panel_init,
 657         .panel_shutdown = db1300fb_panel_shutdown,
 658 };
 659
 660 static struct resource au1300_lcd_res[] = {
 661         [0] = {
 662                 .start  = AU1200_LCD_PHYS_ADDR,
 663                 .end    = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
 664                 .flags  = IORESOURCE_MEM,
 665         },
 666         [1] = {
 667                 .start  = AU1300_LCD_INT,
 668                 .end    = AU1300_LCD_INT,
 669                 .flags  = IORESOURCE_IRQ,
 670         }
 671 };
 672
 673 static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
 674
 675 static struct platform_device db1300_lcd_dev = {
 676         .name           = "au1200-lcd",
 677         .id             = 0,
 678         .dev = {
 679                 .dma_mask               = &au1300_lcd_dmamask,
 680                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 681                 .platform_data          = &db1300fb_pd,
 682         },
 683         .num_resources  = ARRAY_SIZE(au1300_lcd_res),
 684         .resource       = au1300_lcd_res,
 685 };
 686
 687 /**********************************************************************/
 688
 689 static struct platform_device *db1300_dev[] __initdata = {
 690         &db1300_eth_dev,
 691         &db1300_i2c_dev,
 692         &db1300_5waysw_dev,
 693         &db1300_nand_dev,
 694         &db1300_ide_dev,
 695         &db1300_sd0_dev,
 696         &db1300_sd1_dev,
 697         &db1300_lcd_dev,
 698         &db1300_ac97_dev,
 699         &db1300_i2s_dev,
 700         &db1300_wm9715_dev,
 701         &db1300_ac97dma_dev,
 702         &db1300_i2sdma_dev,
 703         &db1300_sndac97_dev,
 704         &db1300_sndi2s_dev,
 705 };
 706
 707 static int __init db1300_device_init(void)
 708 {
 709         int swapped, cpldirq;
 710
 711         /* setup CPLD IRQ muxer */
 712         cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
 713         irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
 714         bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
 715
 716         /* insert/eject IRQs: one always triggers so don't enable them
 717          * when doing request_irq() on them.  DB1200 has this bug too.
 718          */
 719         irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
 720         irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
 721         irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
 722         irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
 723
 724         /*
 725          * setup board
 726          */
 727         prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
 728
 729         i2c_register_board_info(0, db1300_i2c_devs,
 730                                 ARRAY_SIZE(db1300_i2c_devs));
 731
 732         /* Audio PSC clock is supplied by codecs (PSC1, 2) */
 733         __raw_writel(PSC_SEL_CLK_SERCLK,
 734             (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 735         wmb();
 736         __raw_writel(PSC_SEL_CLK_SERCLK,
 737             (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
 738         wmb();
 739         /* I2C uses internal 48MHz EXTCLK1 */
 740         __raw_writel(PSC_SEL_CLK_INTCLK,
 741             (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
 742         wmb();
 743
 744         /* enable power to USB ports */
 745         bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
 746
 747         /* although it is socket #0, it uses the CPLD bits which previous boards
 748          * have used for socket #1.
 749          */
 750         db1x_register_pcmcia_socket(
 751                 AU1000_PCMCIA_ATTR_PHYS_ADDR,
 752                 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
 753                 AU1000_PCMCIA_MEM_PHYS_ADDR,
 754                 AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x00400000 - 1,
 755                 AU1000_PCMCIA_IO_PHYS_ADDR,
 756                 AU1000_PCMCIA_IO_PHYS_ADDR   + 0x00010000 - 1,
 757                 DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
 758
 759         swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 760         db1x_register_norflash(64 << 20, 2, swapped);
 761
 762         return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
 763 }
 764 device_initcall(db1300_device_init);
 765
 766
 767 void __init board_setup(void)
 768 {
 769         unsigned short whoami;
 770
 771         db1300_gpio_config();
 772         bcsr_init(DB1300_BCSR_PHYS_ADDR,
 773                   DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
 774
 775         whoami = bcsr_read(BCSR_WHOAMI);
 776         printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
 777                 "BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
 778                 BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
 779                 BCSR_WHOAMI_DCID(whoami));
 780
 781         /* enable UARTs, YAMON only enables #2 */
 782         alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
 783         alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
 784         alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
 785 }